Electrical Components. from Inter-Global

Transcription

1 Electrical Components from Inter-Global

2

3 ELECTRICAL COMPONENTS TABLE OF CONTENTS Fluorescent Ballasts Page # Lamp/Ballast Cross Reference... A1-A2 Magnetic Ballasts... A3-A8 Electronic Ballasts... A8-A19 Nema/ALA Matrix... A20-A22 Warranties... A21-A24 Sockets Page # Ordering Guide... B1 GU24 Base Lampholders... B2-B5 Medium Base Lampholders & Brackets... B6-B14 Mogul Base Lampholders... B15-B16 E-27 Medium Base Lampholders... B17 Bayonet Lampholders... B18 Halogen Lampholders... B18 Photocells & Receptacles Page # Convenience Outlets... C1 Dusk To Dawn Switches... C1-C2

4

5 LAMPS COMPACT FLUORESCENT LAMP/BALLAST CROSS REFERENCE Our LAMP/BALLAST CROSS REFERENCE helps customers identify which Inter-Global ballast operates which specific lamps. X= IG8OR IG8OP IG9O IG9OP IG13OP IG13OS IG22OP IG280P IG12O 22O IG12O 22OB IG13OSNF IG13CP CFT5W/G23 X X X CFT7W/G23 X X X X X CFT9W/G23 X X X X X X X CFT13W/GX23 X X X X X X X X X IG9C IG9CP IG13C IG13ML PS2/809ML 120 PS2/813ML 120 PS2/832EL 120 IG5 13ELS IG13 20ELSX IG13 20ELSXH IG25 32ELSX IG213 20ELSX IG226 32ELSX CFQ13W/GX23 X CFQ13W/GX23 X X X X X X X X CFQ22W/GX32d X CFQ28W/GX32d X FT18W/2G11 X X X CFT5W/2G7 CFT7W/2G7 CFT9W/2G7 X X X CFT13W/2GX7 X X X CFTR13W/GX24q X CFTR18W/GX24q X X X CFTR26W/GX24q X X CFTR32W/G24q X X X CFM18W/2G10 X CFQ13W/G24q X X X CFQ18W/G24q X X X CFQ26W/G24q X X X CFQ32W/G24q X MAGNETIC FLUORESCENT BALLAST ELECTRONIC FLUORESCENT BALLAST A1

6 LAMPS LINEAR FLUORESCENT LAMP/BALLAST CROSS REFERENCE Our LAMP/BALLAST CROSS REFERENCE helps customers identify which Inter-Global ballast operates which specific lamps. X= FC8T9(22W)G10q X X X X FC12T9(32W) IG8O IG8OR IG8OP IG9C IG9CP IG13O 22O IG13O 22OB IG15 20 IG13CWHB IG22ON 12OP IG5 13ELS IG13 20EL IG13 20ELSX IG13 20ELSXH IG13 20EL T9 IG25 32ELSX IG213 20ELSX IG130ELSX IG230ELSX IG214 32ELT8 X F8T5 X X X X X X F13T5 X F14T8 X X X X X F15T8 X X X X X X X X X X F17T8 X X X X X X F18T8 X X X X X X F20T8 X X X F21T8 X F25T8 X X X X F28T8 X F30T8 X X X F32T8 X X X F40T8 X X F40T10 X X F14T12 X X X X F15T12 X X X X X F20T12 X X X X X X X X X F25T12 X X F30T12 X X F40T12 X X MAGNETIC FLUORESCENT BALLAST ELECTRONIC FLUORESCENT BALLAST A2

7 OPEN CORE & COIL BALLAST SINGLE LAMP Contains no PCBs Product Specifications listed below CASE STYLES A B C D E /16 2 3/16 1/2 1 13/ /16 1A 2 1/2 2 9/ / /16 1B 2 1/2 2 21/ / /16 1C 2 9/ / / /16 1D 2 11/ /32 3/4 1 17/ /32 1E 2 7/8 2 9/16 1 1/ / /32 BALLAST 15 LEAD LENGTHS FOR STOCKED BALLASTS. CUSTOM LEAD LENGTHS AVAILABLE. CALL FOR DETAILS. BLACK BLACK STARTER LAMP LINE WHITE Lamp Data Part # Circuit Electrical Data Physical Data Certification Line Minimum Current Input Starting Sound Case Std. Watts Model# Volts Hz (Amps) (Watts) Temp Rating Style Pkg Weight 8 F8T5 bulb F8T5 bulb 8&9 CFT9W/G23 IG F A lbs. UL-CUL IG80R F A lbs. UR-CUR F8T5 8&9 CFT9W/G23 * IG80P F A lbs. UL-CUL CFT7W/G23 DULUX7 7&9 F7TT IG W-5 F/9W25 F A 1A lbs. UR-CUR F7BX CFT9W/G23 CFT7W/G23 CFT9W/G23 DULUX9 7&9 F9TT *IG90P W-5 F/9W25 F A 1A lbs. UL-CUL F9DTT F9BX CFT13W/GX23 CFQ13W/GX23 13 F13TT *IG130P F A 1C 50 28lbs. UL-CUL F13DTT F13BX CFT13W/GX23 13 CFQ13W/GX23 IG130S F A 1B 50 33lbs. UR-CUR 22 PL22 * IG220P F A 1D lbs. UL-CUL 28 PL28 * IG280P F A 1E 50 46lbs. UL-CUL * Ballast Class P NOTE: All Ballasts Type 1, Outdoor For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A3

8 OPEN CORE & COIL BALLAST SINGLE LAMP WITHOUT BRACKET Contains no PCBs Product Specifications listed below STARTER CASE STYLES A B C 3 11/ /32 2 3A 21/ / /16 BALLAST LAMP BLACK BLACK WHITE LINE CUSTOM LEAD LENGTHS AVAILABLE. CALL FOR DETAILS. Lamp Data Part # Circuit Electrical Data Physical Data Certification Line Minimum Current Input Starting Sound Case Std. Watts Model# Volts Hz (Amps) (Watts) Temp Rating Style Pkg Weight CFT13W/GX23 13 CFQ13W/GX23 IG F A lbs. UR-CUR CFT13W/GX23 13 CFQ13W/GX23 * IG B F A lbs. UR-CUR CFT13W/GX23 13 CFQ13W/GX23 IG130SNF F A 3A 50 33lbs. UR-CUR F15T F A lbs. UR-CUR 15,18,20 F18T8 IG F A lbs. UR-CUR F20T F A lbs. UR-CUR F15T F A lbs. UR-CUR 15,18,20 F18T8 * IG B F A lbs. UR-CUR F20T F A lbs. UR-CUR * Class B Insulation NOTE: All Ballasts Type 1, Outdoor For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A4

9 ENCAPSULATED CORE & COIL BALLAST SINGLE LAMP Contains no PCBs Product Specifications listed below STARTER LAMP BALLAST BLACK BLACK WHITE CASE STYLES A B C D E F /16 1 7/ / /64 2 9/16 1 1/4 1 47/ /64 3 5/64 15 LEAD LENGTHS FOR STOCKED BALLASTS. CUSTOM LEAD LENGTHS AVAILABLE. CALL FOR DETAILS. LINE Lamp Data Part # Circuit Electrical Data Physical Data Certification Line Minimum Current Input Starting Sound Case Std. Watts Model# Volts Hz (Amps) (Watts) Temp Rating Style Pkg Weight CFT13W/GX23 13 CFQ13W/G23-2 *IG13CPWH F A lbs. UL-CUL F14T8 F14T12 14,15 F15T8 17,20 F15T12 IG F A lbs. UL-CUL F17T8 F20T12 F14T12 14,15, F14T8 18,20 F15T8 F18T8 F20T12 IG13CWHB F A lbs. UL-CUL CFT5W/G23 5,7, CFT7W/G23 *IG9CP F A lbs. UL-CUL 8,9 CFT9W/G23 F8T5 CFT5W/G23 5,7 CFT7W/G23 IG9C F A lbs. UR 8,9 CFT9W/G23 F8T5 CFT13W/GX23 13 CFQ13W/G23-2 IG13C F A lbs. UR-CUR * Ballast Class P NOTE: All Ballasts Type 1, Outdoor For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A5

10 LINEAR FLUORESCENT BALLAST IG220N 120P 2 Lamp Ballast Automatic reset able thermal disconnect Standard leads 105 C 18AWG wire (customer specified lengths) Normal Power Factor Suitable for (2) F15T8 15W, (2) F15T12 15W, or (2) F20T12 20W lamps Contains no PCBs UL and CUL listed LAMP LAMP YELLOW YELLOW BLACK WHITE BALLAST RED RED BLUE BLUE LINE Lamps must be mounted Within 1/2" of grounded metal reflector Catalog Circuit Input Type Power Ballast Input Sound Number Volts Wattage Number Factor Factor Current Rating IG220N-120P MAG. N A For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A6

11 BALLAST SINGLE LAMP IG13 Ballast A reset able thermal disconnect from Texas Instruments Standard lead length C 18AWG wire. Suitable for PLC Quad 13W lamp. Contains no PCBs UL and CUL listed Wattage Circuit Catalog Type Power Ballast Input Sound Min. Start Volts Number Factor Factor Current Rating Temp IG13ML-120 MAG (NPF) A 32 F For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A7

12 8 Series POWERSOCKET The Powersocket was designed to meet the need of fixture manufacturers to build competitive compact fluorescent fixtures. Making a high quality, compact fluorescent fixture is no more difficult or time consuming than building an incandescent fixture. US Patent DES 415,103 Suitable for one CFT5W/G23, CFT7W/G23, CFT9W/G23, CFT13W/GX23, CFQ13W/GX23, CFQ26W/G24*, or CFTR32W/G24* lamp Class A Sound Rating Magnetic and Electronic Models Available Small compact size SPECIFICATIONS Operating Voltage: 120 VAC ± 10% Frequency: 60Hz (Electronic 50/60Hz) Protection: Class P Thermal Protection Over Current: Fuse (Electronic) Features & Benefits Electronic models are more efficient compared to standard magnetic ballasts, have end of life lamp protection, and eliminate strobing Contains No PCBs Rapid Start (Electronic) Min. Starting Temp: 0 F ( C) * 32 F Min. Starting Temp Max. Case Temp: 158 F (75 C) FCC, 47 CFR, Part 18 Consumer Limits (Electronic) 2.69 (68mm) Power Factor: Normal (MH Models - High) Lamp Current Crest Factor: <1.7 (Electronic) End of Lamp Life Protection (Electronic) 2.69 (68mm) 2.69 (68mm) 1.38 (35mm) 1.69 (43mm) 2 (51mm) 1.69 (43mm) 1.85 (47mm) 2.24 (57mm) 1.77 (45mm) 1.96 (50mm) 2.36 (60mm) Lamp Catalog Line Type Line Ballast THD Min Start Color Case UL Number Volts Current Factor Percent Temp Code Size CFT5W/G23 7 CFT7W/G23 **PS2/809ML MAGNETIC F White A UL(IFFX), CUL(IFFX7) CFT9W/G23 10 CFT13W/GX23 **PS2/813ML-120 CFQ13W/GX23 PS213ML MAGNETIC F Black B UL(IFFX), CUL(IFFX7) CFQ26W/G24 PS2/832EL ELECTRONIC CFQ32W/G ** High Power Factor available as special order. Leads extend from side For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. M002PT Mounting bracket for Powersocket Made of steel Available in white only FIts all Powersocket models Solves mounting issues Leads extended from side 0 F Orange C UR(IFFX2), CUR(IFFX8) Leads extended through Bottom Hole A8

13 ELECTRONIC BALLAST IG5 13ELS One Lamp Multi-Watt Small Case Size Lightweight Versatile Energy Saving Wide lamp versatility, suitable for one F8T5, F13T5*, CFT5W/2G7, CFT7W/2G7, or CFT9W/2G7 lamp Class A Sound Rating End of Lamp Life Protection More efficient compared to standard magnetic ballasts Lead wires do not interfere with mounting holes SPECIFICATIONS Operating Voltage: 120 VAC ± 10% Frequency: 50/60Hz Protection: Class P Inherent Thermal Protection Features & Benefits Contains No PCBs Eliminates strobing Thermal potting Metal enclosure Rapid Start Regulatory Approvals: UL, CUL Listed Over Current: Fuse Min. Starting Temp: 0 F ( C) * 32 F Min. Starting Temp Max. Case Temp: 158 F (75 C) FCC, 47 CFR, Part 18 Consumer Limits Type 1 Outdoor, Normal Power Factor 0.195" (5mm) 0.195" (5mm) 1.04" (26mm) Line Lamp Line Input Power Crest Ballast THD Min Start Voltage Type Current Power Factor Factor Factor Percent Temp 120 F8T F 120 F13T F 120 CFT5W/2G F 120 CFT7W/2G F 120 CFT9W/2G F For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A9

14 ELECTRONIC BALLAST IG13 20EL One Lamp Multi-Watt Small Case Size Lightweight Versatile Energy Saving IG13 20EL/T9 See page A11 Wide lamp versatility, suitable for one F14T8, F14T12, F15T8, F15T12, F17T8, F18T8, F20T8, F20T12, or FC8T9(22W)G10q lamp. Optional pre-wired plug for CIRCLINE lamps (IG13-20EL/T9) Class A Sound Rating More efficient compared to standard magnetic ballasts Lead wires do not interfere with mounting holes Features & Benefits Contains No PCBs Eliminates strobing Thermal potting Metal enclosure Rapid Start SPECIFICATIONS Operating Voltage: 120 VAC ± 10% Frequency: 50/60Hz Protection: Class P Inherent Thermal Protection Regulatory Approvals: UL, CUL Listed Over Current: Fuse Min. Starting Temp: 0 F ( C) Max. Case Temp: 158 F (75 C) FCC, 47 CFR, Part 18 Consumer Limits Type 1 Outdoor, Normal Power Factor 2.22" (56mm) 0.19" (5mm) 1.58" (40mm) 0.19" (5mm) Line Lamp Line Input Power Crest Ballast THD Min Start Voltage Type Current Power Factor Factor Factor Percent Temp 120 F14T O F 120 F14T F 120 F15T F 120 F15T F 120 F17T F 120 F18T F 120 F20T F 120 FC8T F For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A10

15 IG13 20EL/T9 One Lamp Pre-Wired With Plug Small Case Size Lightweight ELECTRONIC BALLAST PLUG FOR CIRCLINE LAMPS Features & Benefits Suitable for one FC8T9 CIRCLINE 22 WATT lamp. Class A Sound Rating More efficient compared to standard magnetic ballasts Lead wires do not interfere with mounting holes Contains No PCBs Eliminates strobing Thermal potting Metal enclosure Rapid Start SPECIFICATIONS Operating Voltage: 120 VAC ± 10% Frequency: 50/60Hz Protection: Class P Inherent Thermal Protection Regulatory Approvals: UL, CUL Listed Over Current: Fuse Min. Starting Temp: 0 F ( C) Max. Case Temp: 158 F (75 C) FCC, 47 CFR, Part 18 Consumer Limits Type 1 Outdoor, Normal Power Factor 3.107" (79mm) 0.19" (5mm) 1.745" (44mm) 0.19" (5mm) Line Lamp Line Input Power Crest Ballast THD Min Start Voltage Type Current Power Factor Factor Factor Percent Temp 120 FC8T F For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A11

16 ELECTRONIC BALLAST IG13 20ELSX One Lamp Multi-Watt Small Case Size Lightweight Versatile Energy Saving Wide lamp versatility, suitable for one CFQ13W/G24q, CFT13W/2GX7, CFM13W/G24q, F14T8, F14T12, F15T8, F15T12, F17T8, F18T8, CFTR18W/GX24, CFQ18W/G24q, FT18W/2G11, F20T8, F20T12, or FC8T9(22W)G10q lamp Class A Sound Rating End of Lamp Life Protection More efficient compared to standard magnetic ballasts Lead wires do not interfere with mounting holes SPECIFICATIONS Operating Voltage: 120 VAC ± 10% Frequency: 50/60Hz Protection: Class P Inherent Thermal Protection Features & Benefits Contains No PCBs Eliminates strobing Thermal potting Metal enclosure Rapid Start Regulatory Approvals: UL, CUL Listed Over Current: Fuse Min. Starting Temp: 0 F ( C) Max. Case Temp: 158 F (75 C) FCC, 47 CFR, Part 18 Consumer Limits Type 1 Outdoor, Normal Power Factor 3.095" (79mm) 0.19" (5mm) 0.19" (5mm) 1.87" (47mm) Line Voltage Lamp Type Line Current Input Power Power Factor Crest Factor Ballast Factor THD Percent Min Start Temp 120 CFQ13W/G24q F 120 CFT13W/2GX F 120 CFQ18W/G24q F 120 F14T O F 120 F14T F 120 F15T F 120 F15T F 120 F17T F 120 F18T F 120 F20T F SCAN THE QR CODE TO THE LEFT TO ACCESS THE ENERGY STAR SUB COMPONENT DATABASE. For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A12

17 ELECTRONIC BALLAST IG13 20ELSXH One Lamp Multi-Watt Small Case Size High Heat Lightweight Energy Saving Wide lamp versatility, suitable for one CFQ13W/G24q, CFT13W/2GX7, CFM13W/G24q, F14T8, F14T12, F15T8, F15T12, F17T8, F18T8, CFTR18W/GX24, CFQ18W/G24q, FT18W/2G11, F20T8, F20T12, or FC8T9(22W)G10q lamp Class A Sound Rating End of Lamp Life Protection More efficient compared to standard magnetic ballasts Lead wires do not interfere with mounting holes SPECIFICATIONS Operating Voltage: 120 VAC ± 10% Frequency: 50/60Hz Protection: Class P Inherent Thermal Protection Features & Benefits Contains No PCBs Eliminates strobing Thermal potting Metal enclosure Rapid Start Regulatory Approvals: UL, CUL Listed Over Current: Fuse Min. Starting Temp: 0 F ( C) Max. Case Temp: 194 F (90 C) FCC, 47 CFR, Part 18 Consumer Limits Type 1 Outdoor, Normal Power Factor 3.095" (79mm) 0.19" (5mm) 0.19" (5mm) 1.2" (30mm) 1.87" (47mm) Line Voltage Lamp Type Line Current Input Power Power Factor Crest Factor Ballast Factor THD Percent Min Start Temp 120 CFQ13W/G24q F 120 CFT13W/2GX F 120 CFQ18W/G24q F 120 F14T O F 120 F14T F 120 F15T F 120 F15T F 120 F17T F 120 F18T F 120 F20T F SCAN THE QR CODE TO THE LEFT TO ACCESS THE ENERGY STAR SUB COMPONENT DATABASE. For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A13

18 IG213 20ELSX Two Lamp Multi-Watt Small Case Size High Heat Lightweight Energy Saving ELECTRONIC BALLAST Features & Benefits Wide lamp versatility, suitable for two F15T8, F17T8, F20T12, CFQ13W/G24q, CFTR13W/GX24q, CFT13W/2GX7, CFQ18W/G24q, CFTR18W/GX24q, FT18W/2G11, or CFM18W/2G10 lamps Class A Sound Rating End of Lamp Life Protection More efficient compared to standard magnetic ballasts Contains No PCBs Eliminates strobing Thermal potting Metal enclosure Rapid Start SPECIFICATIONS Operating Voltage: 120 VAC ± 10% Frequency: 50/60Hz Protection: Class P Inherent Thermal Protection Regulatory Approvals: UL, CUL Listed Over Current: Fuse Min. Starting Temp: 0 F ( C) Max. Case Temp: 194 F (90 C) FCC, 47 CFR, Part 18 Consumer Limits Type 1 Outdoor, Normal Power Factor 3.775" (96mm) 5.07" (129mm) 1.10" (28mm) 1.96" (50mm) 0.19" (5mm) 1.5" (38mm) 1.89" (48mm) 0.19" (5mm) dia. Weight: 9.6 oz. Case Quantity: 40pcs Case Weight: 32 lbs Standard Lead Length: black/white-12 blue/red-27 yellow-27 Line Voltage Lamp Type Line Current Input Power Power Factor Crest Factor Ballast Factor THD Percent Min Start Temp 120 F15T F 120 F17T F 120 F20T F 120 CFQ13W/G24q F 120 CFTR13W/GX24q F 120 CFT13W/2GX F 120 CFQ18W/G24q F 120 CFTR18W/GX24q F 120 FT18W/2G F 120 CFM18W/2G F SCAN THE QR CODE TO THE LEFT TO ACCESS THE ENERGY STAR SUB COMPONENT DATABASE. For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A14

19 ELECTRONIC BALLAST IG25 32ELSX One Lamp Multi-Watt Small Case Size High Heat Lightweight Energy Saving Features & Benefits Wide lamp versatility, suitable for one F25T8, CFQ26W/G24q, CFTR26W/GX24q, or CFTR32W/GX24q lamp Class A Sound Rating End of Lamp Life Protection More efficient compared to standard magnetic ballasts Contains No PCBs Eliminates strobing Thermal potting Metal enclosure Rapid Start SPECIFICATIONS Operating Voltage: 120 VAC ± 10% Frequency: 50/60Hz Protection: Class P Inherent Thermal Protection Regulatory Approvals: UL, CUL Listed Min. Starting Temp: 0 F ( C) Max. Case Temp: 194 F (90 C) Over Current: Fuse FCC, 47 CFR, Part 18 Consumer Limits Type 1 Outdoor, Normal Power Factor 3.95" (100mm) 4.72 (120mm) 0.19" (5mm) 1.06 (27mm) 1.57" (40mm) 0.19" (5mm).68 (17.5mm) 4.33 (110mm) Weight: 6.7oz. Case Quantity: 50pcs Case Weight: 25.5 lbs Standard Lead Length: black/white-12 blue/red-27 Line Lamp Line Input Power Crest Ballast THD Min Start Voltage Type Current Power Factor Factor Factor Percent Temp 120 F25T F 120 CFQ26W/G24q F 120 CFTR26W/GX24q F 120 CFTR32W/GX24q F SCAN THE QR CODE TO THE LEFT TO ACCESS THE ENERGY STAR SUB COMPONENT DATABASE. For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A15

20 ELECTRONIC BALLAST IG226 32ELSX Two Lamp Multi-Watt Small Case Size High Heat Lightweight Energy Saving Features & Benefits Wide lamp versatility, suitable for two CFQ26W/G24q, CFTR26W/GX24q, or CFTR32W/GX24q lamps Class A Sound Rating End of Lamp Life Protection More efficient compared to standard magnetic ballasts Lead wires do not interfere with mounting holes Contains No PCBs Eliminates strobing Thermal potting Metal enclosure Rapid Start SPECIFICATIONS Operating Voltage: 120 VAC ± 10% Frequency: 50/60Hz Protection: Class P Inherent Thermal Protection Regulatory Approvals: UL, CUL Listed Min. Starting Temp: 0 F ( C) Max. Case Temp: 194 F (90 C) Over Current: Fuse FCC, 47 CFR, Part 18 Consumer Limits Type 1 Outdoor, Normal Power Factor 5.23" (133mm) 4.35" (110mm) 1.06" (27mm) 2.45" (62mm) 0.19" (5mm) 2.25 (57mm) Weight: 14 oz. Case Quantity: 40pcs Case Weight: 29.5 lbs Standard Lead Length: black/white-12 blue/red/yellow-12 Line Lamp Line Input Power Crest Ballast THD Min Start Voltage Type Current Power Factor Factor Factor Percent Temp 120 CFQ26W/G24q F 120 CFTR26W/GX24q F 120 CFTR32W/GX24q F SCAN THE QR CODE TO THE LEFT TO ACCESS THE ENERGY STAR SUB COMPONENT DATABASE. For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A16

21 ELECTRONIC BALLAST IG130ELSX One Lamp Multi-Watt Small Case Size Lightweight Versatile Energy Saving Features & Benefits Wide lamp versatility, suitable for one F25T8, F25T12, F30T8, F30T12, *FC12T9(32W), *F32T8, *F34T12, *F40T8, *F40T10, or *F40T12 lamp Class A Sound Rating End of Lamp Life Protection More efficient compared to standard magnetic ballasts Lead wires do not interfere with mounting holes Contains No PCBs Eliminates strobing Thermal potting Metal enclosure Rapid Start SPECIFICATIONS Operating Voltage: 120 VAC ± 10% Frequency: 50/60Hz Protection: Class P Inherent Thermal Protection Regulatory Approvals: UL, CUL Listed Min. Starting Temp: 0 F ( C) * 32 F Min. Starting Temp Max. Case Temp: 158 F (75 C) Over Current: Fuse Type 1 Outdoor, Normal Power Factor 1.2" (30mm) 1.87" (47mm) 0.2" (5mm) Line Voltage Lamp Type Line Current Input Power Power Factor Crest Factor Ballast Factor THD Percent Min Start Temp 120 F25T F 120 F25T F 120 F30T F 120 F30T F 120 F32T F 120 F34T F 120 F40T F SCAN THE QR CODE TO THE LEFT TO ACCESS THE ENERGY STAR SUB COMPONENT DATABASE. For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A17

22 ELECTRONIC BALLAST IG230ELSX Two Lamp Multi-Watt Small Case Size Lightweight Versatile Energy Saving Wide lamp versatility, suitable for two F25T8, F25T12, F30T8, F30T12, *F32T8, *F34T12, *F40T8, *F40T10, or *F40T12 lamps Class A Sound Rating End of Lamp Life Protection More efficient compared to standard magnetic ballasts Lead wires do not interfere with mounting holes SPECIFICATIONS Operating Voltage: 120 VAC ± 10% Frequency: 50/60Hz Protection: Class P Inherent Thermal Protection Features & Benefits Contains No PCBs Eliminates strobing Thermal potting Metal enclosure Rapid Start Regulatory Approvals: UL, CUL Listed Over Current: Fuse Min. Starting Temp: 0 F ( C) * 32 F Min. Operating Temp Max. Case Temp: 158 F (75 C) FCC, 47 CFR, Part 18 Consumer Limits Type 1 Outdoor, Normal Power Factor 1.175" (30mm) 0.19" (5mm) 1.915" (49mm) 0.19" (5mm) dia. Line Lamp Line Input Power Crest Ballast THD Min Start Voltage Type Current Power Factor Factor Factor Percent Temp 120 F25T F 120 F25T F 120 F30T F 120 F30T F 120 F32T F 120 F34T F SCAN THE QR CODE TO THE LEFT TO ACCESS THE ENERGY STAR SUB COMPONENT DATABASE. For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A18

23 IG214 32ELT8 One or Two Lamp Multi-Watt Energy Saving ELECTRONIC BALLAST Features & Benefits Wide lamp versatility, suitable for one or two F14T8, F15T8, F17T8, F21T8, F25T8, F28T8, F30T8 or F32T8 lamps Class A Sound Rating More efficient compared to standard magnetic ballasts SPECIFICATIONS Operating Voltage: 120 VAC Frequency: 50/60Hz Protection: Class P Inherent Thermal Protection Contains No PCBs Eliminates strobing Thermal potting Metal enclosure Instant Start Regulatory Approvals: UL, CUL Listed Over Current: Fuse Min. Starting Temp: 0 F ( C) Max. Case Temp: 158 F (75 C) FCC, 47 CFR, Part 18 Consumer Limits Type 1 Outdoor, Normal Power Factor 7.5" (191mm) 9.57 (243.1mm) 1.25" (32mm) 1.91" (49mm) 0.33" (8mm) 1.22 (31mm) 1.77 (45mm) Weight: 20 oz. Case Quantity: 30pcs Case Weight: 38 lbs Standard Lead Length: black/white-24 red-50 blue-34 Line Voltage Lamp Type Line Current Input Power Power Factor Crest Factor Ballast Factor THD Percent Min Start Temp X F14T F X F14T F X F15T F X F15T F X F17T F X F17T F X F21T F X F21T F X F25T F X F25T F X F28T F X F28T F X F30T F X F30T F X F32T F X F32T F SCAN THE QR CODE TO THE LEFT TO ACCESS THE ENERGY STAR SUB COMPONENT DATABASE. For warranty information refer to Inter-Global s BALLAST LIMITED WARRANTY in the back of the Ballast section of this catalog. A19

24 NEMA/ALA BALLAST MATRIX NEMA (NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION) ALA (AMERICAN LIGHTING ASSOCIATION) SCAN THE QR CODE TO THE RIGHT TO ACCESS THE ENERGY STAR SUB COMPONENT DATABASE. Ballasts listed in this table meet the ballast-controlled performance requirements in the ENERGY STAR Program Requirements for Residential Light Fixtures, version 4.0. Data in this matrix is subject to change. More information can be found at Ballast Model IG13-20ELSX IG13-20ELSX IG13-20ELSX IG13-20ELSX IG230ELSX IG230ELSX IG130ELSX IG130ELSX Number of Lamps Lamp Type CFQ13W/G24q CFQ18W/G24q CFT13W/2GX7 F17T8 F32T8 F25T8 F32T8 F25T8 Min. Initial Lamp Lumens Min. Lumens Per Watt Input Power (Watts) Ballast Factor Lamp Start Time (ms) Power Factor Lamp Current Crest Factor Ballast Hot Spot Location Max. Ballast Case Temp( C) FCC Yes Yes Yes Yes Yes Yes Yes Yes Requirements Ballast Frequency(kHz) Transient Yes Yes Yes Yes Yes Yes Yes Yes Protection End of Life Yes Yes Yes N/A N/A N/A N/A N/A Protection (EOL) Max # of Lamps N/A N/A N/A N/A N/A Shutdown at EOL Dimming No No No No No No No No Capable Safety Yes Yes Yes Yes Yes Yes Yes Yes Listing Line Voltage Socket No No No No No No No No Standard Design A20

25 NEMA/ALA BALLAST MATRIX CONTINUED NEMA (NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION) ALA (AMERICAN LIGHTING ASSOCIATION) SCAN THE QR CODE TO THE RIGHT TO ACCESS THE ENERGY STAR SUB COMPONENT DATABASE. Ballasts listed in this table meet the ballast-controlled performance requirements in the ENERGY STAR Program Requirements for Residential Light Fixtures, version 4.0. Data in this matrix is subject to change. More information can be found at Ballast Model IG213-20ELSX IG213-20ELSX IG213-20ELSX IG213-20ELSX IG25-32ELSX IG25-32ELSX IG25-32ELSX Number of Lamps Lamp Type CFQ13W/G24q CFQ18W/G24q CFT13W/2GX7 F17T8 CFQ26W/G24d CFTR26W/GX24q CFTR32W/GX24q Min. Initial Lamp Lumens Min. Lumens Per Watt Input Power (Watts) Ballast Factor Lamp Start Time (ms) Power Factor Lamp Current Crest Factor Ballast Hot Spot Location Max. Ballast Case Temp( C) FCC Yes Yes Yes Yes Yes Yes Yes Requirements Ballast Frequency(kHz) Transient Yes Yes Yes Yes Yes Yes Yes Protection End of Life Yes Yes Yes N/A Yes Yes Yes Protection (EOL) Max # of Lamps N/A Shutdown at EOL Dimming No No No No No No No Capable Safety Yes Yes Yes Yes Yes Yes Yes Listing Line Voltage Socket No No No No No No No Standard Design A21

26 NEMA/ALA BALLAST MATRIX CONTINUED NEMA (NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION) ALA (AMERICAN LIGHTING ASSOCIATION) SCAN THE QR CODE TO THE RIGHT TO ACCESS THE ENERGY STAR SUB COMPONENT DATABASE. Ballasts listed in this table meet the ballast-controlled performance requirements in the ENERGY STAR Program Requirements for Residential Light Fixtures, version 4.0. Data in this matrix is subject to change. More information can be found at Ballast Model IG226-32ELSX IG226-32ELSX IG226-32ELSX IG214-32ELT8 IG214-32ELT8 Number of Lamps Lamp Type CFQ26W/G24d CFTR26W/GX24q CFTR32W/GX24q F32T8 F32T8 Min. Initial Lamp Lumens Min. Lumens Per Watt Input Power (Watts) Ballast Factor Lamp Start Time (ms) Power Factor Lamp Current Crest Factor Ballast Hot Spot Location Max. Ballast Case Temp( C) FCC Yes Yes Yes Yes Yes Requirements Ballast Frequency(kHz) Transient Yes Yes Yes Yes Yes Protection End of Life Yes Yes Yes N/A N/A Protection (EOL) Max # of Lamps N/A N/A Shutdown at EOL Dimming No No No No No Capable Safety Yes Yes Yes Yes Yes Listing Line Voltage Socket No No No No No Standard Design A22

27 BALLAST LIMITED WARRANTY Inter-Global warrants that its fluorescent ballast shall be free from defects in material and workmanship and will be of the designated kind and quality for the assigned period listed below from the date of manufacture. Part Number IG9O IG9OP IG9CP PS2/809ML-120 IG13OP IG13CPWH PS2/813ML-120 PS213ML-120 IG13ML-120 IG13MH-120 IG15-20 IG28OP IG220N-120P Warranted for this Period 3 Years (maximum case temp. of 90 C) 3 Years (maximum case temp. of 90 C) 3 Years (maximum case temp. of 90 C) 3 Years (maximum case temp. of 75 C) 3 Years (maximum case temp. of 90 C) 3 Years (maximum case temp. of 90 C) 3 Years (maximum case temp. of 75 C) 3 Years (maximum case temp. of 75 C) 3 Years (maximum case temp. of 90 C) 3 Years (maximum case temp. of 90 C) 3 Years (maximum case temp. of 90 C) 3 Years (maximum case temp. of 90 C) 3 Years (maximum case temp. of 90 C) Part Number IG5-13ELS IG13-20EL IG13-20EL/T9 IG13-20ELSX IG13-20ELSXH IG130ELSX IG25-32ELSX IG213-20ELSX IG226-32ELSX IG230ELSX PS2/832EL-120 IG214-32ELT8 Warranted for this Period 2 Years (maximum case temp. of 75 C) 2 Years (maximum case temp. of 75 C) 2 Years (maximum case temp. of 75 C) 2 Years (maximum case temp. of 75 C) 2 Years (maximum case temp. of 90 C) 2 Years (maximum case temp. of 75 C) 2 Years (maximum case temp. of 90 C) 2 Years (maximum case temp. of 90 C) 2 Years (maximum case temp. of 90 C) 2 Years (maximum case temp. of 75 C) 2 Years (maximum case temp. of 75 C) 2 Years (maximum case temp. of 75 C) Inter-Global makes no warranty whatsoever with respect to any ballast not installed and operated in accordance with the current edition of the National Electrical Code, the standards of safety of Underwriters Laboratories, the standards of the American National Standards Institute and specific instructions provided by Inter- Global for installation and operation of the ballast. If it appears within the said warranty period that any Inter-Global ballast does not meet the warranty specified above, the purchaser must give written notice of their warranty claim and return the ballast, at the purchaser's expense to Inter-Global or an authorized sales representative in purchaser's geographic area.. Within sixty (60) days of receipt, Inter-Global shall at its expense and option correct any defects by either repairing or replacing the defective part(s) or the ballast. This warranty is not applicable to any ballast subjected to abnormal stresses, operating conditions and operating conditions including lamp mismatch applications. TEMPERATURE ON BALLAST CASE SHOULD NOT EXCEED THE MAXIMUM TEMPERATURE SPECIFIED ABOVE. Inter-Global cannot be responsible for non Inter-Global equipment which is attached to or used in conjunction with the ballast and all such equipment is expressly excluded from Inter-Global's warranty. The foregoing warranty is exclusive of all other statutory written or oral warranties and no other warranties of any kind, statutory or otherwise, are given or herein expressed. INTER-GLOBAL HEREBY DISCLAIMS ANY IMPLIED STATUTORY WARRANTY OR IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Under no circumstances whether as a result of breach of contract, breach of warranty, tort strict liability or otherwise, will Inter-Global or any distributor or sales representative be liable for consequential, incidental, special or exemplary damages, including but not limited to loss of profits, loss of use or damage to any property or equipment, cost of capital, cost of substitutes, products facilities or services, down time cost or claims of purchaser's customers. The Liability of Inter-Global or any distributor or sales representative on all claims of any kind for any loss or damage arising out of, resulting from or concerning any aspect of this limited warranty, from the ballast furnished, shall not exceed the price of the specific ballast which gives rise to the claims. REPAIR OR REPLACEMENT FOR BALLAST UNDER WARRANTY Step 1 Contact Inter-Global within 30 days of discovery to explain the nature of the defect: BY MAIL - Inter-Global Warranties, 6333 Etzel Avenue, St. Louis, MO BY PHONE BY FAX BY - info@interglobal-inc.com Step 2 You may be instructed to send some or all of the units back for evaluation. In some cases a complete lighting fixture will be required for testing. You will be given a Return Authorization (RGA) Number. This number must appear on all cartons, packaging slips, debit memos and other correspondence. No merchandise will be accepted without a valid RGA number marking the shipment. The ballast must be returned freight prepaid-collect SHIPMENTS WILL BE REFUSED. RETURN MERCHANDISE TO 6333 ETZEL AVE., ST. LOUIS, MO Step 3 The returned ballast will be evaluated by Inter-Global to determine if it is covered under the Limited Warranty. BALLAST UNDER WARRANTY - When all of the following conditions exist, the returned ballast will be considered under warranty and will be repaired or replaced at the option of Inter-Global. 1. The ballast was manufactured less than the specific warranty period earlier than the date of return. 2. It is determined by Inter-Global that the ballast was installed and operated in accordance with the current edition of the National Electrical Code, the standards for safety of Underwriter's Laboratories, Inc. the standards of the American National Standards Institute and the specific inst ructions provided by Inter-Global for installation and operation of the ballast. 3. The ballast does not operate according to Inter-Global specifications, due to defects in material or workmanship. 4. The ballast manufacturing date code has not been altered or is not missing (DATE CODE - Each ballast is marked with a date code in the form of a sticker or stamped into the case depending on the type of unit). The first two digits represent the year, and the next two digits represent the month of the year of manufacture. 5. The ballast was not damaged due to physical abuse and was returned in adequate packaging to prevent damage to the ballast. BALLAST NOT UNDER WARRANTY - Any ballast determined by Inter-Global not to be under warranty will be returned to the customer (freight paid by customer), or destroyed, at the customer's option. A23

28

29 ORDERING GUIDE For Lampholders with Single Brackets Body Series Number Bracket Number A G B&W PLST LDS STR 12.77mm Description to include wire length, wire type, screwshell type if different than aluminum (STD) dimensions for stripping leads. Ground Wire ( G with ground, O without ground wire) Bracket Type For Harness Set Lampholders Number of Lampholders Body Series Number Bracket Number 2X Q G B&W PLST LDS STR 12.77mm SKTS 6 C to C Description to include wire length, wire type, screwshell type if different than aluminum (STD) dimensions for stripping leads. Ground Wire ( G with ground, O without ground wire) Bracket Type For Lampholders with Double Brackets Body Series Number Top Bracket Number Top Bracket Type 3WO 039 E 163 T G B&W PLST LDS STR 12.77mm Description to include wire length, wire type, screwshell type if different than aluminum (STD) dimensions for stripping leads. Ground Wire ( G with ground, O without ground wire) Bottom Bracket Type Bottom Bracket Number B1

30 GU24 BASE LAMPHOLDERS Series GU GU24 Lampholder Molded white phenolic GU24 base socket with threaded male, threaded female or rivet type brackets. Standard leads are 12 long, AWM 18 gauge plastic insulated wire. Custom lead lengths and C sleeving available upon request.* Custom lead configurations available upon request.* Ground wire available upon request.* Bracket types available are listed on pages B2-B5. Standard packed 400 to a carton. UL CUL Listed, Suitable for Damp Locations 660W, 600V *additional charges apply 0.94 (24mm) 1.53 (39mm) 0.47 (12mm) BRACKET TYPES FOR GU24 LAMPHOLDERS Part Number Dimensions Photo NOW IN STOCK NOW IN STOCK GU26I 0.472" (12mm) 1.024" (26mm) 0.374" (9.5mm) 1.551" (39.4mm) 1.535" (39mm) NOW IN STOCK GU27F 1.181" (30mm) 1.535" (39mm) GU28C 0.374" (9.5mm) 1.063" (27mm) 1.535" (39mm) NOW IN STOCK GU28D 0.374" (9.5mm) 0.906" (23mm) B2

31 BRACKET TYPES FOR GU24 LAMPHOLDERS Part Number Dimensions Photo NOW IN STOCK GU28K COMING AUGUST " (28.3mm) 1.535" (39mm) COMING SOON 1.102" (28mm) COMING JUNE 08 NOW IN STOCK GU28KS COMING AUGUST 08 ASK ABOUT T5 MODELS COMING SOON CLEAR PRISMATIC AVAILABLE COMING JUNE 08 GU24 MODELS AVAILABLE 1.114" (28.3mm) 1.457" (37mm) 1.102" (28mm) 1.535" (39mm) 1.441" (36.6mm) ASK ABOUT T5 MODELS GU28KN ASK ABOUT GU24 MODELS 1.575" (40mm) CLEAR PRISMATIC AVAILABLE NEW 1.044" (26.5mm) 1.535" (39mm) GU24 MODELS AVAILABLE NOW IN STOCK GU36C COMING AUGUST 08 COMING SOON ASK ABOUT GU24 MODELS NEW 1.417" (36mm) 0.374" (9.5mm) COMING JUNE 08 GU36D ASK ABOUT T5 MODELS 0.374" (9.5mm) CLEAR PRISMATIC AVAILABLE 1.417" (36mm) 2.476" (62.9mm) GU24 MODELS AVAILABLE 0.161" (4.1mm) GU37F ASK ABOUT GU24 MODELS 0.236" (6mm) 0.413" (10.5mm) 1.449" (36.8mm) 0.402" (10.2mm) NEW 1.083" (27.5mm) 1.535" (39mm) B3

32 BRACKET TYPES FOR GU24 LAMPHOLDERS Part Number Dimensions Photo NOW IN STOCK GU46G COMING AUGUST " (60.1mm) COMING SOON 1.535" (39mm) COMING JUNE " (9.6mm) NOW IN STOCK GU51H COMING AUGUST 08 ASK ABOUT T5 MODELS CLEAR PRISMATIC AVAILABLE 2" (50.8mm) COMING SOON COMING JUNE 08 GU24 MODELS AVAILABLE 1.535" (39mm) ASK ABOUT T5 MODELS GU56C ASK ABOUT GU24 MODELS CLEAR PRISMATIC AVAILABLE NEW 1.969" (50mm) 3.008" (76.4mm) 0.374" (9.5mm) GU24 MODELS AVAILABLE ASK ABOUT GU24 MODELS GU56D NEW 1.969" (50mm) 1.535" (39mm) 0.374" (9.5mm) 3.008" (76.4mm) GU94L 0.602" (15.3mm) 3.701" (94mm) 0.433" (11mm) 1.535" (39mm) 0.374" (9.5mm) 4.516" (114.7mm) B4

33 BRACKET TYPES FOR GU24 LAMPHOLDERS Part Number Dimensions Photo 1.535" (39mm) NOW IN STOCK GU101M COMING AUGUST " (101.5mm) COMING SOON COMING JUNE 08 ASK ABOUT T5 MODELS 1.339" (34mm) 3.291" (83.6mm) 4.764" (121mm) 0.433" (11mm) 0.382" (9.7mm) CLEAR PRISMATIC AVAILABLE NOW IN STOCK GU201A COMING AUGUST 08 GU24 MODELS AVAILABLE ASK ABOUT GU24 MODELS 0.937" (23.8mm) COMING SOON COMING JUNE 08 NEW 1.535" (39mm) NOW IN STOCK GU205A COMING AUGUST 08 ASK ABOUT T5 MODELS CLEAR PRISMATIC AVAILABLE 0.244" (6.2mm) 1.150" (29.2mm) 0.374" (9.5mm) COMING SOON GU24 MODELS AVAILABLE 1.535" (39mm) 2.102" (53.4mm) COMING JUNE 08 ASK ABOUT GU24 MODELS ASK ABOUT T5 MODELS NEW CLEAR PRISMATIC AVAILABLE GU305A 0.386" (9.8mm) GU24 MODELS AVAILABLE 1.535" (39mm) 2.260" (57.4mm) ASK ABOUT GU24 MODELS NEW B5

34 MEDIUM BASE LAMPHOLDERS Series 201 Phenolic Lampholder Molded black phenolic E26 medium base socket with threaded male, threaded female or rivet type brackets. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. Ground wire available upon request. Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Bracket types available are listed on page B7. Standard packed 400 to a carton. UL Listed, 660W, 250V Series 275 Phenolic Lampholder with Screw Terminals Molded black phenolic E26 medium base lampholder with threaded male, threaded female or rivet type brackets. Terminal screws are 6-3/2 backed out and installed into contacts. Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Bracket types available are listed on page B7. Standard packed 400 to a carton. UL Listed, 660W, 250V Series 301 Tapered Porcelain Lampholder Unglazed porcelain body on E26 medium base lampholder with threaded male, threaded female or rivet type brackets. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. (Bare copper ground wire available upon request.) Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Bracket types available are listed on page B7. Standard packed 200 to a carton. UL and CUL Listed, 660W, 250V Series 303 Porcelain Lampholder B6 Unglazed porcelain body on E26 medium base lampholder with threaded male, threaded female or rivet type brackets. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. (Bare copper ground wire available upon request.) Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Bracket types available are listed on page B7. Standard packed 200 to a carton. UL and CUL Listed, 660W, 250V

35 BRACKET TYPES FOR SERIES 201, 275, 301 & 303 Bracket Type Number L B A Description Bracket Type A Bracket Type B Bracket Type F Bracket Type M Bracket Type J Bracket Type L A mm - - 1/8-27 Female Threaded Extrusion A mm - - A mm - - A mm - - A mm - - A mm - - A mm - - B mm 7.90mm - 1/8-27 Male Threaded Nipple B mm 9.52mm - B mm 12.70mm - B mm 15.88mm - B mm 7.90mm - B mm 9.52mm - B mm 12.70mm - B mm 15.88mm - B mm 7.90mm - B mm 9.52mm -- B mm 12.70mm - B mm 15.88mm - B mm 7.90mm - B mm 9.52mm -- B mm 12.70mm - B mm 15.88mm - B mm 7.90mm - B mm 9.52mm - B mm 12.70mm - B mm 15.88mm - F mm 7.90mm 27mm 1/8-27 Male Threaded Nipple F mm 9.52mm 27mm F mm 12.70mm 27mm F mm 15.88mm 27mm F mm 7.90mm 34mm F mm 9.52mm 34mm F mm 12.70mm 34mm F mm 15.88mm 34mm F mm 7.90mm 41mm F mm 9.52mm 41mm F mm 12.70mm 41mm F mm 15.88mm 41mm F mm 7.90mm 85mm F mm 9.52mm 85mm F mm 12.70mm 85mm F mm 15.88mm 85mm M001 18mm 18 25mm Double Snap Spring M mm 18 26mm J mm 9.5mm 38mm 1/8-27 Male Threaded Nipple J002 15mm 9.5mm 43mm J mm 9.5mm 51mm L mm - 78mm 4mm Dia. Hole Bracket Type O O mm - 30mm B7

36 Series 202 MEDIUM BASE LAMPHOLDERS WITH SNAP SPRING BRACKETS Phenolic Lampholder Series 202 Molded black phenolic E26 medium base socket with snap spring brackets. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. Ground wire available upon request. Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Bracket types available are listed on page B8 and B9. Standard packed 400 to a carton. UL Listed, 660W, 250V Series 202 Harness Set (UR, CUR) Series 302 Tapered Porcelain Lampholder Unglazed porcelain body on E26 medium base lampholder with snap spring brackets. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. Ground wire available upon request. Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Bracket types available are listed on page B8 and B9. Standard packed 200 to a carton. UL and CUL Listed, 660W, 250V Series 304 Porcelain Lampholder Unglazed porcelain body on E26 medium base lampholder with snap spring brackets. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. (Bare copper ground wire available upon request.) Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Bracket types available are listed on page B8 and B9. Standard packed 200 to a carton. UL and CUL Listed, 660W, 250V BRACKET TYPES FOR SERIES 202, 302 & 304 Bracket Type Number L B A Description Bracket Type C C mm 5 - Single Snap Spring C mm 6 - C mm 10 - C mm 15 - C mm 20 - C mm 5 - C mm 6 - C mm 10 - C mm 15 - C mm 20 - C mm 5 - C mm 6 - C mm 10 - C mm 15 - C mm 20 - C mm 5 - C mm 6 - C mm 10 - B8

37 BRACKET TYPES FOR SERIES 202, 302 & 304 (CONTINUED) Bracket Type Number L B A Description Bracket Type I Bracket Type K C mm 15 - Single Snap Spring C mm 20 - C mm 5 - C mm 6 - C mm 10 - C mm 15 - C mm 20 - C mm 5 - C mm 6 - C mm 10 - C mm 15 - C mm 20 - C mm 5 - C mm 6 - C mm 10 - C mm 15 - C mm 20 - I mm - - K mm 26mm 31mm Harness Set Snap Spring Q mm 36mm - Bracket Type Q Bracket Type D Bracket Type H D mm 5 - Single Snap Spring D mm 6 - D mm 10 - D mm 15 - D mm 20 - D mm 5 - D mm 6 - D mm 10 - D mm 15 - D mm 20 - D mm 5 - D mm 6 - D mm 10 - D mm 15 - D mm 20 - D mm 5 - D mm 6 - D mm 10 - D mm 15 - D mm 20 - D mm 5 - D mm 6 - D mm 10 - D mm 15 - D mm 20 - D mm 5 - D mm 6 - D mm 10 - D mm 15 - D mm 20 - D mm 5 - D mm 6 - D mm 10 - D mm 15 - D mm 20 - H mm 5mm - Special Snap Spring Bracket Type G G mm 22mm - G mm 22mm - B9

38 SNAP IN KEYLESS MEDIUM BASE LAMPHOLDERS Series 205 Phenolic Lampholder Molded black phenolic E26 medium base socket with snap spring bracket. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. Ground wire available upon request. Standard screw shells are HOLE PATTERN aluminum.(brass and nickel plated brass available at extra cost.) Bracket types available are listed on page B10. Standard packed 400 to a carton. UL Listed, 660W, 250V Series 305A Porcelain Lampholder Unglazed porcelain body on E26 medium base lampholder with snap spring bracket. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. Ground wire available upon request. Standard screw shells are HOLE PATTERN aluminum. (Brass and nickel plated brass available at extra cost.) Bracket types available are listed on page B10. Standard packed 200 to a carton. UL and CUL Listed, 660W, 250V ALSO AVAILABLE WITH TERMINAL SCREWS Series 307A Porcelain Lampholder Unglazed porcelain body on E26 medium base lampholder with snap spring bracket. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. (Bare copper ground wire available upon request.) Standard screw shells are aluminum. HOLE PATTERN (Brass and nickel plated brass available at extra cost.) Available with thermal protector. (UR, CUR, 600W, 250VAC) Bracket types available are listed on page B10. Standard packed 100 to a carton. UL and CUL Listed, 660W, 250V OPTIONAL THERMAL PROTECTOR COVER BRACKET TYPES FOR SERIES 205, 305, 307, 405 & 407 Bracket Type Number Description N , 305 and 405 only Single Snap Spring N and 407 only Bracket Type N B10

39 SNAP IN MEDIUM BASE PORCELAN LAMPHOLDERS Series 306 Porcelain Lampholder Glazed or unglazed porcelain E26 medium base with 6-32 insert and with snap spring bracket specially adapted for recess box use. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. (Bare copper ground wire available upon request.) Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Standard packed 200 to a carton. UL and CUL listed, 660W, 220V Bracket Type Number L B A K mm 57mm 32mm Series 405 4kV Porcelain Lampholder Unglazed porcelain body on E26 medium base lampholder with 4kV pulse rating and snap spring bracket. Standard lead types are AWM 16 gauge type SF-2 wire. HOLE PATTERN Standard screw shells are nickel plated brass. Bracket types available are listed on page B10. Standard packed 200 to a carton. UL and CUL listed, 660W, 600V Series 407 4kV Porcelain Lampholder Unglazed porcelain body on E26 medium base lampholder with 4kV pulse rating and snap spring bracket. Standard lead types are AWM 16 gauge type SF-2 wire. HOLE PATTERN Standard screw shells are nickel plated brass. Bracket types available are listed on page B10. Standard packed 100 to a carton. UL and CUL listed, 660W, 600V KEYLESS MEDIUM BASE PORCELAIN LAMPHOLDERS Series 308A Porcelain Lampholder Unglazed porcelain E26 medium base with cap for 1/8 and 1/4 female IP thread outer thread body and standard cap and insulation disk. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. Ground wire available upon request. Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Standard packed 200 to a carton. UL and CUL listed, 660W, 250V 1/8 or 1/4 NPT END CAPS AVAILABLE B11

40 Series 367 KEYLESS MEDIUM BASE PORCELAIN LAMPHOLDERS Porcelain Lampholder Unglazed porcelain E26 medium base with 8-32 bushing for mounting. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. (Ground wire available upon request.) Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Standard packed 200 to a carton. UL and CUL listed, 660W, 250V Series 368 Porcelain Lampholder Glazed or Unglazed porcelain E26 medium base with 1/8 or 1/4 threaded aluminum for cap (IP cap female threads) and insulation disk. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. Also available with SPT brown or black or glass braided silicone rubber insulated wire. (Bare copper ground wire available upon request.) Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Standard packed 200 to a carton. UL and CUL listed, 660W, 250V 1/8 or 1/4 NPT END CAPS AVAILABLE Series 369 Porcelain Lampholder Glazed or unglazed porcelain E26 medium base with 6-32 cernter screw for mounting. Hole in center contact for easy attachment to housing. Specially designed for assembly in outdoor castings. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. (Ground wire available upon request.) Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Standard packed 200 to a carton. UL and CUL listed, 660W, 250V Series 370 Porcelain Lampholder Glazed or unglazed porcelain E26 medium base with two 6-32 bushings for mounting. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Standard packed 200 to a carton. UR, CUR Recognized, 660W, 250V B12

41 Series 371 Porcelain Lampholder Unglazed porcelain E26 medium base with 8-32 bushing in centerfor attachment. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire.200 glass braided silicone rubber wire also available. Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Standard packed 200 to a carton. UR, CUR Recognized, 660W, 250V KEYLESS MEDIUM BASE PORCELAIN LAMPHOLDERS Series 372 Porcelain Lampholder Glazed or unglazed porcelain E26 medium base with 8-32 bushing for mounting. Standard lead types are AWM 18 gauge 105 0, 125 0, plastic insulated wire. Standard screw shells are aluminum. (Brass and nickel plated brass available at extra cost.) Standard packed 200 to a carton. UR, CUR Recognized, 660W, 250V Series 469 4kV Porcelain Lampholder Glazed or unglazed porcelain E26 medium base, 4kV pulse rating with 6-32 center screw for mounting glass braided silicon insulated wire. Standard screw shells are nickel plated brass. Standard packed 200 to a carton. UL and CUL listed, 660W, 600V Thermal Protector Cover Use instead of heat shrink tubing. Can be mounted directly to fixture. B13

42 KEYLESS MEDIUM BASE 4KV PORCELAN LAMPHOLDERS Series 470A 4kV Porcelain Lampholder Glazed or unglazed porcelain E26 medium base, 4kV pulse rating with mounting screws on 7/8 inch centers. Standard lead types are AWM 16 gauge type SF-2 wire. Standard screw shells are nickel plated brass. Open or closed wireway porcelain body. Standard packed 200 to a carton. UL and CUL listed, 660W, 600V 1/8, 1/4 or 3/8 NPT END CAPS AVAILABLE Series 470B 4kV Porcelain Lampholder Glazed or unglazed porcelain E26 medium base, 4kV pulse rating with bushings for mounting. Standard lead types are AWM 16 gauge type SF-2 wire. Standard screw shells are nickel plated brass. Open or closed wireway porcelain body. Standard packed 200 to a carton. UR, CUR Recognized, 660W, 600V 1/8, 1/4 or 3/8 NPT END CAPS AVAILABLE Series 471B 4kV Porcelain Lampholder Glazed or unglazed porcelain E26 medium base, 4kV pulse rating with bushings for mounting. Standard lead types are AWM 16 gauge type SF-2 wire. Standard screw shells are nickel plated brass. Standard packed 200 to a carton. UR, CUR Recognized, 660W, 600V 1/8, 1/4 or 3/8 NPT END CAPS AVAILABLE NEW DESIGN LAMPHOLDER WITH LUGS Series 614B 4kV Porcelain Lampholder With Lugs Porcelain body, E26 Medium Base with bushings on 3/4 inch centers and 2 lugs for attachment of leads. Standard screw shells are nickel plated brass. Electrical Rating: 660W, 600V, 4kV Pulse Rated. Standard packed 100 to a carton. UR, CUR Recognized, 600W, 600V B14

43 Series 570B 4kV Porcelain Lampholder Glazed or unglazed porcelain, 4kV pulse rating with lamp grips and bushings on 1 3/8 inch centers. Standard lead types are AWM 16 gauge type SF-2 wire. Standard screw shells are nickel plated brass. Open or closed wireway porcelain body. Standard packed 100 to a carton. UR, CUR Recognized, 1500W, 600V Series 571 4kV Porcelain Lampholder Glazed or unglazed porcelain base with lamp grips and screws for mounting. Standard lead types are AWM 16 gauge type SF-2 wire. Standard screw shells are nickel plated brass. Open or closed wireway porcelain body. Standard packed 100 to a carton. UL and CUL listed, 1500W, 600V 1/4 or 3/8 NPT END CAPS AVAILABLE Series 570U Series 571U 4kV Porcelain Lampholder Glazed porcelain, 4kV pulse rating with screws on 34.93mm centers. Standard lead types are AWM 14 gauge type SF-2 wire. Nickel plated brass screw shell with lamp grips. 600V, 1500W Standard packed 50 to a carton. UL, CUL Listed, 1500W, 600V 4kV Porcelain Lampholder Glazed porcelain, 4kV pulse rating with bushings on 34.93mm centers. Standard lead types are AWM 14 gauge type SF-2 wire. Nickel plated brass screw shell with lamp grips. 600V, 1500W Standard packed 50 to a carton. UR, CUR Recognized, 1500W, 600V MOGUL BASE PORCELAIN LAMPHOLDERS 1/4 or 3/8 NPT END CAPS AVAILABLE SERIES 570U & 571U FOR OPEN RATED METAL HALIDE LAMPS 4kV PULSE RATING GRIP LOCKS U.S. Patent No. 7,178,969 1/4 or 3/8 NPT END CAPS AVAILABLE 1/4 or 3/8 NPT END CAPS AVAILABLE B15

44 MOGUL BASE PORCELAIN LAMPHOLDERS NEW DESIGN MOGUL SOCKET SERIES 670 & 671 GRIP LOCK & POSITION ORIENTED IN 1 MODEL 5kV PULSE RATING Series 670 5kV Porcelain Lampholder Glazed or unglazed porcelain, 5kV pulse rating with bushings on 34.93mm centers. Standard lead types are AWM 14 gauge type SF-2 wire. Nickel plated brass screw shell with lamp grips. Also suitable for position oriented lamp (see illustration above). 600V, 1500W Standard packed 50 to a carton. UR, CUR Recognized, 1500W, 600V 1/4 or 3/8 NPT END CAPS AVAILABLE Series 671 5kV Porcelain Lampholder Glazed or unglazed porcelain, 5kV pulse rating with screws on 34.93mm centers. Standard lead types are AWM 14 gauge type SF-2 wire. Nickel plated brass screw shell with lamp grips. Also suitable for position oriented lamp (see illustration above). 600V, 1500W Standard packed 50 to a carton. UL, CUL Listed, 1500W, 600V 1/4 or 3/8 NPT END CAPS AVAILABLE B16

45 E 27 MEDIUM BASE LAMPHOLDERS Series 502, 504 & 505 Porcelain Lampholders Unglazed porcelain phenolic E27 medium base lampholder with assorted brackets. Standard lead types are AWM 18 gauge 105 0, & plastic insulated wire. Green ground wire available on request. Standard screw shells are aluminum. Brass & nickel plated available at extra cost. Bracket types available are listed below. Standard packed 400 to a carton. Series 502 Series 504 Series 505 BRACKET TYPES FOR SERIES E 27 MEDIUM BASE Bracket Type Number L B Description N mm - Snap Spring Bracket G mm - Special Snap Bracket H mm - Bracket Type N A mm - 1/8-27 Female Threaded Extrusion Bracket Type A Bracket Type G Bracket Type H B17

46 BAYONET LAMPHOLDERS BA15D Bayonet Type Lampholders Bayonet type lampholders for BA15d base lamps Nickel plated metal shell design 12, No. 18 AWG SEW C 300V wire. UR Recognized HALOGEN LAMPHOLDERS TL 8PA, TL 8PK & TL 8PJ/K Compact Halogen Lampholders These compact lampholders for G5.3 bi-pin halogen lamps are ideally suited for applications with limited space. They feature a ceramic base with mica cover. Product Specifications listed below. TL-8PA TL-8PJ/K UR, CUR Recognized TL-8PK TL 8PB & TL 8PD Miniature Halogen Lampholders Miniature bi-pin quartz halogen lampholders are designed for multi-base usage and accept G4, GX5.3, and G6.35 base designations. They have ceramic bodies with mica covers. Product Specifications listed below. UR, CUR Recognized TL-8PB TL-8PD TL 8PI Mini Can Halogen Lampholder Mini-Can lampholder for use with single-end halogen T-4 lamps. Product Specifications listed below. UR, CUR Recognized Catalog Number Wiring Lamp/Base Type Rating TL-8PA 6, No. 18 SF C 600V (tinned inners) G5.3 bi-pin 250V-100W TL-8PJ/K 6, No. 18 SF C 600V (tinned inners) G5.3 bi-pin 250V-100W TL-8PB 6, No. 18 AWM SEW-1 appliance wire 200 C G4 (MR11), G V-100W TL-8PD 6, No. 18 AWM SEW-1 appliance wire 200 C G4 (MR11), G6.35, GX5.3 (MR16) 250V-100W TL-8PI 12, No. 18 SF C black and white T4 250V-100W B18

47 CONVENIENCE OUTLETS S830 Convenience Outlet UL Listed, 120V, 15A Sets include all items shown in drawings. Sets shipped in bulk. Standard Packed 100 to a carton. Product Specifications listed below. 2 (50.8mm) Flat Head Countersunk Self Tapping Screw 6-32 X 1 Gasket 3 Wire Convenience Outlet Lead Style Colors Height Width Deep Length S830BC Black S830PC White (80mm).625 (15.9mm) C Leads Grounded Convenience Outlet UL Listed, 125V, 15A Standard Packed 500 to a carton. Product Specifications listed below. Lead Style Colors Height Width Deep Length BK Black WH White PC 08 Incandescent & Fluorescent Dusk To Dawn Switch Maximum Wattage: Incandescent - 120V, Up to 300 Watts GU24/Fluorescent - 120V, Up to 39 Watts Can be used with Electronic and Magnetic Ballast Electronic Circuit with Mechanical Switching Relay UR, CUR Recognized Standard Packed 250 to a carton Lead Style Colors Height Width Length Length PC-08 Black DUSK TO DAWN SWITCHES 14 (35cm) C Leads PC Dusk To Dawn Switch Swivel Hood and Base Fully adjustable two piece cover helps to eliminate strobing caused by light reflected off nearby surfaces Fits Inter-Global PC-08 Dusk to Dawn Switch Style Colors (7.9mm) Standard Packed 500 to a carton Black WHT White (37.8mm) (7.9mm) WIRING DIAGRAM (15.37mm) 1.36 (34.3mm) (18.2mm) (18mm) (15.37mm) 14 (35cm) C Leads (14mm) ROTATES (37.8mm) (7.9mm) (15.37mm) 1.36 (34.3mm) (18.2mm) S822BC Incandescent Dusk To Dawn Switch Maximum Wattage: Incandescent - 120V, Up to 300 Watts Can be used with Electronic and Magnetic Ballast Electronic Circuit W/Mechanical Switching Relay UL, CUL Listed Standard Packed 100 to a carton 14 (35cm) (37.8mm) (18.2mm) 300WATT 1.36 (34.3mm) C Leads Lead Style Colors Height Width Length Length S822BC Black WIRING DIAGRAM C1