Optanium. High Efficiency IntelliVolt Instant Start Ballasts for High Efficiency T8 Lamps DESIGN HIGHLIGHTS: APPLICATIONS:
|
|
|
- Christian Fowler
- 6 years ago
- Views:
Transcription
1 Optanium High Efficiency IntelliVolt Instant Start Ballasts for High Efficiency T8 Lamps P R O D U C T O V E R V I E W : Advance expands a new family of Smart Solutions for T8 lighting systems Optanium. Optanium is a high-efficiency electronic ballast family that combines maximized energy savings with the flexibility you need to create a T8 s ystem matched to your requirements. High-efficiency Instant start Optanium ballasts are available to meet specific needs in two versions - a standard light output design (0.87 Ballast ) and a low-watt design (0.77 Ballast ). All have cold-start capability down to -20 F and a low-profile design optimized for today s fixture designs. The ballast also meets the new NEMA/CEE high performance T8 lighting system specifications. DESIGN HIGHLIGHTS: Hi-efficiency Ballast consumes less input watts than a standard efficiency electronic ballast Instant-start lamp ignition Consumes less energy than Rapid-start ballasts UL Type CC Rated Meets UL criteria for arcing protection IntelliVolt technology ( V, 50/60Hz) Ensures shipment of correct voltage ballast or fixture for all applications Low-profile, lightweight housing Physically interchangeable with standard electromagnetic and electronic ballasts Provides flexibility in new generation fixture designs Independent lamp operation (ILO) Other lamps continue to operate when one or more lamps fail Striation reduction circuitry Reduces potential for lamp striation typically seen in energy saving lamps. Operates between 40 khz and 52 khz Eliminates interference with Infrared Control Systems or commonly used Electronic Article Surveillance (EAS) systems -20 F starting capability* Suitable for cold temperature situations using standard lamps Centium technology (<10 THD, >0.98 PF) Meets most demanding power quality requirements Perfect for applications where harmonics are a concern 20ft. remote mounting/tandem wiring capability Provides maximum application flexibility Auto-restrike capability Eliminates the need to reset power mains after failed lamps are replaced Operates standard F32T8 lamps and 4 energy saving lamps Provides maximum versatility * Consult lamp manufacturer for temperature versus lamp characteristics Note: 1. All standard models may experience lamp striations when operating with 25W, 28W, or 30W energy saving T8 lamps. The use of the Optanium (IOP) models is recommended to reduce lamp striation. 2. Only the Optanium (IOP) models are suitable for tandem-wiring applications operating 25W, 28W or 30W energy saving T8 lamps. APPLICATIONS: General Lighting Decorative Lighting Retail Lighting Indirect Lighting Tel: Fax: Customer Support/Technical Service:
2 ANSI () Ballast F17T8 (17W) F / -28 C 230 IOP-1P32-SC F / -28 C 230 IOP-2P32-SC F / -28 C 230 IOP-2P32-SC F / -28 C 230 IOP-3P32-SC F / -28 C 230 IOP-3P32-SC F / -28 C 230 IOP-4P32-SC F / -28 C 230 IOP-4P32-SC F25T8 (25W) F / -28 C 230 IOP-1P32-SC F / -28 C 230 IOP-2P32-SC F / -28 C 230 IOP-2P32-SC F / -28 C 230 IOP-3P32-SC F / -28 C 230 IOP-3P32-SC F / -28 C 230 IOP-4P32-SC F / -28 C 230 IOP-4P32-SC
3 ANSI () Ballast F32T8, FBO32T8, F32T8/U F / -28 C 230 IOP-1P32-SC F / -28 C 230 IOP-2P32-SC F / -28 C 230 IOP-2P32-SC F / -28 C 230 IOP-3P32-SC F / -28 C 230 IOP-3P32-SC F / -28 C 230 IOP-4P32-SC F / -28 C 230 IOP-4P32-SC F32T8/ES (25W Philips Lamps) F / 15 C 230 IOP-1P32-SC F / 15 C 230 IOP-2P32-SC F / 15 C 230 IOP-2P32-SC F / 15 C 230 IOP-3P32-SC F / 15 C 230 IOP-3P32-SC F / 15 C 230 IOP-4P32-SC F / 15 C 230 IOP-4P32-SC
4 ANSI () Ballast F32T8/ES (28W) F / 15 C 230 IOP-1P32-SC F / 15 C 230 IOP-2P32-SC F / 15 C 230 IOP-2P32-SC F / 15 C 230 IOP-3P32-SC F / 15 C 230 IOP-3P32-SC F / 15 C 230 IOP-4P32-SC F / 15 C 230 IOP-4P32-SC F32T8/ES (30W) F40T F / 15 C 230 IOP-1P32-SC F / 15 C 230 IOP-2P32-SC F / 15 C 230 IOP-2P32-SC F / 15 C 230 IOP-3P32-SC F / 15 C 230 IOP-3P32-SC F / 15 C 230 IOP-4P32-SC F / 15 C 230 IOP-4P32-SC F / 0 C 230 IOP-2P32-SC F / 0 C 230 IOP-3P32-SC F / 0 C 230 IOP-4P32-SC
5 ANSI () Ballast F17T8 (17W) F / -28 C 230 IOP-1P32LW-SC F / -28 C 230 IOP-2P32LW-SC F / -28 C 230 IOP-2P32LW-SC F / -28 C 230 IOP-3P32LW-SC F / -28 C 230 IOP-3P32LW-SC F / -28 C 230 IOP-4P32LW-SC F / -28 C 230 IOP-4P32LW-SC F25T8 (25W) F / -28 C 230 IOP-1P32LW-SC F / -28 C 230 IOP-2P32LW-SC F / -28 C 230 IOP-2P32LW-SC F / -28 C 230 IOP-3P32LW-SC F / -28 C 230 IOP-3P32LW-SC F / -28 C 230 IOP-4P32LW-SC F / -28 C 230 IOP-4P32LW-SC
6 ANSI () Ballast F32T8, FBO32T8, F32T8/U F / -28 C 230 IOP-1P32LW-SC F / -28 C 230 IOP-2P32LW-SC F / -28 C 230 IOP-2P32LW-SC F / -28 C 230 IOP-3P32LW-SC F / -28 C 230 IOP-3P32LW-SC F / -28 C 230 IOP-4P32LW-SC F / -28 C 230 IOP-4P32LW-SC F32T8/ES (25W Philips Lamps) F / 15 C 230 IOP-1P32LW-SC F / 15 C 230 IOP-2P32LW-SC F / 15 C 230 IOP-2P32LW-SC F / 15 C 230 IOP-3P32LW-SC F / 15 C 230 IOP-3P32LW-SC F / 15 C 230 IOP-4P32LW-SC F / 15 C 230 IOP-4P32LW-SC
7 ANSI () Ballast F32T8/ES (28W) F / 15 C 230 IOP-1P32LW-SC F / 15 C 230 IOP-2P32LW-SC F / 15 C 230 IOP-2P32LW-SC F / 15 C 230 IOP-3P32LW-SC F / 15 C 230 IOP-3P32LW-SC F / 15 C 230 IOP-4P32LW-SC F / 15 C 230 IOP-4P32LW-SC F32T8/ES (30W) F40T F / 15 C 230 IOP-1P32LW-SC F / 15 C 230 IOP-2P32LW-SC F / 15 C 230 IOP-2P32LW-SC F / 15 C 230 IOP-3P32LW-SC F / 15 C 230 IOP-3P32LW-SC F / 15 C 230 IOP-4P32LW-SC F / 15 C 230 IOP-4P32LW-SC F / 0 C 230 IOP-2P32LW-SC F / 0 C 230 IOP-3P32LW-SC F / 0 C 230 IOP-4P32LW-SC
8 Optanium Ballast Specifications Section I - Physical Characteristics 1.1 The electronic ballast shall be physically interchangeable with standard electromagnetic and standard electronic ballasts. 1.2 The electronic ballast shall be furnished with integral leads, color-coded to ANSI C Section II - Performance Requirements 2.1 Ballast shall be Instant Start or Programmed Start. 2.2 Instant Start ballast shall provide Independent Lamp Operation (ILO) for allowing remaining lamp(s) to maintain full light output when one or more lamp fails. Programmed Start ballast shall provide semi-independent lamp operation. 2.3 Ballast shall contain auto restart circuitry in order to restart lamps without resetting power. 2.4 Ballast shall operate from 50/60 Hz input source of 120V through 277V with sustained variations of +/-10% (voltage and frequency) with no damage to the ballast. 2.5 Ballast shall be high frequency electronic type and operate at a frequency above 42 khz through 52 khz to minimize interference with infrared control systems and eliminate visible flicker. 2.6 Ballast shall have a Power greater than 0.98 for primary lamp. 2.7 Ballast shall have a minimum ballast factor for primary lamp application as follows: 0.77 or 0.71 for Low Watt, 0.87 or 0.88 for Normal Light Output, and 1.18 for High Light. 2.8 Ballast shall provide for a Lamp Current Crest of 1.7 or less in accordance with lamp manufacturer recommendations. 2.9 Ballast input current shall have Total Harmonic Distortion (THD) of less than 10% when operated at nominal line voltage with primary lamp Ballast shall have a Class A sound rating for all 4-foot lamps and smaller. WHITE BLACK BALLAST WHITE BLACK BALLAST 2.11 Ballast shall have a minimum starting temperature of -20 F (-29 C) or 0 F (-18 C) for standard T8 lamps and 60 F (16 C) for energy-savings T8 lamps Ballast shall tolerate sustained open circuit and short circuit output conditions without damage Ballast shall contain an anti-striation circuitry to prevent striation on energy-savings lamps Programmed Start ballast shall provide lamp EOL Protection Circuitry Section III - Regulatory Requirements 3.1 Ballast shall not contain any Polychlorinated Biphenyl (PCB). 3.2 Ballast shall be Underwriters Laboratories (UL) listed, Class P, and Type 1 Outdoor; and Canadian Standards Association (CSA) certified, where applicable. 3.3 Ballast shall comply with ANSI C62.41 Category A for Transient protection. 3.4 Ballast shall comply win ANSI C82.11, where applicable. 3.5 Ballast shall comply with the requirements of the Federal Communications Commission (FCC) rules and regulations, Title 47 CFR part 18, Non-Consumer (Class A) for EMI/RFI (conducted and radiated). 3.6 Ballast shall comply with UL Type CC rating. 3.7 Ballast shall meet NEMA/CEE high performance T8 lighting system specificatio. Section IV - Other 4.1 The electronic ballast shall be produced in a factory certified to ISO 9002 Quality System Standards. 4.2 The electronic ballast shall carry a five-year warranty from the date of manufacture against defects in material or workmanship, including replacement for operation at a maximum case temperature of 70 C. Ballasts with a 90 C designation in their catalog number shall also carry a three-year warranty at a maximum case temperature of 90 C. 4.3 The manufacturer shall have a fifteen-year history of producing electronic ballasts for the North American market. LINE 1 - Lamp Operation LINE 2 - Lamp Operation WHITE BLACK BALLAST WHITE BLACK YELLOW YELLOW BALLAST 1.18" 8.90" 9.5" LINE LINE 1.7" 3 - Lamp Operation 4 - Lamp Operation Advance W. Higgins Road Rosemont, IL Tel: Fax: Customer Support/Technical Service: As a Licensee in the NEMA Premium Electronic Ballast Program, Advance has determined that this product meets the NEMA Premium Efficiency specifications for premium energy efficiency Advance, A Division of Philips Electronic North America All rights reserved. Reproduction in whole or part is prohibited without the prior written consent of the copyright owner. The information presented in this document, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the published for any consequences of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. Form No. EL-2153-R07 1/08
Reduce Maintenance Costs *
Reduce Maintenance Costs * Philips Advance programmed start parallel Optanium ballasts for T8 lamps helps lower maintenance costs with independent lamp operation. Philips Advance Optanium high-efficiency
Input Current (Amps) Input Power (ANSI Watts)
ICN-2S28-T@120 Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (ANSI Watts) Ballast MAX THD % Power MAX Lamp Current Crest F14T5 1 14 0/-18 0.14 17 1.07
High performance for high ceilings
High performance for high ceilings Philips Advance Optanium programmed start parallel ballasts for T5HO and T8 lamps offers improved efficiency-saving on both energy and maintenance costs. Our new addition
Input Current (Amps) Input Power (ANSI Watts)
Electrical Specifications HCN4S5490C2LSG@347 Brand Name CENTIUM T5 Ballast Type Electronic Starting Method Programmed Start Lamp Connection Series/Parallel Input Voltage 347 Input Frequency 50/60 HZ Status
Input Power (Watts) (min/max)
IZT-2S32-SC@120 Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (Watts) Ballast Factor MAX THD % Power Factor Lamp Current Crest Factor F17T8 2 17 50/10
Input Power (Watts) (min/max)
IZT-128-D@120V Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (Watts) Ballast Factor MAX THD % Power Factor Lamp Current Crest Factor F14T5 1 14 50/10
Input Power (Watts) (min/max)
IZT-4PSP32-G@120V Input Voltage 120 Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (Watts) Ballast Factor MAX THD % Power Factor Lamp Current Crest Factor
Input Power (Watts) (min/max)
IZT-2T42-M5-BS@120 Lamp Type Num. of Lamps Rated Lamp Watts M Start Temp ( F/C) Input Current (Amps) Input Power (Watts) Ballast Factor MAX THD % Power Factor Lamp Current Crest Factor CFTR32W/GX24Q 2
Input Current (Amps) Input Power (ANSI Watts)
ICN-2S54-90C-T@120 Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (ANSI Watts) Ballast MAX THD % Power MAX Lamp Current Crest F54T5/HO 1 54-20/-29 0.53
Input Power (Watts) (min/max)
IZT-4PSP32-G@120V Input Voltage 120 Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (Watts) Ballast Factor MAX THD % Power Factor Lamp Current Crest Factor
Input Current (Amps) Input Power (ANSI Watts)
Electrical Specifications ICN4S5490C2LSG@120 Brand Name CENTIUM T5 Ballast Type Electronic Starting Method Programmed Start Lamp Connection Series/Parallel Input Voltage 120-277 Input Frequency 50/60 HZ
ICN2S40N35I Ele Ballast (2) F40T V
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 ICN2S40N35I Ele Ballast (2) F40T12 120-277V Philips Advance Catalog Number Manufacturer Description Weight per unit Product
Input Power (Watts) (min/max)
IZT3PSP32SC@120 Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (Watts) Ballast Factor MAX THD % Power Factor Lamp Current Crest Factor F17T8 3 17 50/10
RELB2S40N35I (2)F40T12 120V Ele BLST
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 RELB2S40N35I (2)F40T12 120V Ele BLST Philips Advance Catalog Number Manufacturer Description Weight per unit Product Category
Input Power (Watts) (min/max)
IZT-2S26-M5-BS@120 Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (Watts) Ballast Factor MAX THD % Power Factor Lamp Current Crest Factor CFQ13W/G24Q 1
Input Current (Amps) Input Power (ANSI Watts)
ICF-2S42-M2-BS@120 Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (ANSI Watts) Ballast MAX THD % Power MAX Lamp Current Crest * CFQ26W/G24Q 2 26 0/-18
Performance and Efficiency
Electronic Fluorescent Quick Guide 347V Applications Fluorescent Solutions Performance and Efficiency Electronic Fluorescent Ballasts for 347V Applications Quick Guide Contents Electronic Fluorescent Ballasts
1,2,3... As easy as. Mark 10 Powerline. For Compact Fluorescent Lamps
s easy as 1,2,3... Mark 10 Powerline immable allasts Listed 704G Philips dvance Mark 10 Powerline immable allasts make converting your existing fixtures easy. For companies looking to make their fixed-output
Lighting The Way. Ballast Specification Guide
Lighting The Way To Energy Savings Ballast Specification Guide Ballast Specification Guide Welcome to the American Ballast family of products and services In six short years, American Ballast has built
The sustainable choice. Optanium high-efficiency ballasts for today s T8 lighting needs
The sustainable choice Optanium high-efficiency ballasts for today s T8 lighting needs A renewed focus on energy Across the country today, businesses are taking a much closer look at ways to conserve energy
The New York University Concourse Project. New York City. Existing Electrical Conditions
The New York University Concourse Project New York City Technical Report TWO Existing Electrical Conditions Kevin Hsia Lighting/Electrical Option Advisor: Professor T. Dannerth November 4, 2008 Executive
HIGH FREQUENCY ELECTRONIC BALLASTS
HIGH FREQUENCY S Introduction High efficiency, high frequency electronic ballasts offer enhanced lighting performance and energy savings. The Electric Research Institute estimates that lighting consumes
ELECTRONIC FLUORESCENT BALLASTS
ELECTRONIC FLUORESCENT ALLASTS Fluorescent allasts AmbiStar SmartMate Standard T5HO PureVOLT 1 Lighting s Atlas -11 ELECTRONIC FLUORESCENT ALLASTS Fluorescent allasts Fluorescent allasts - - High-efficiency
ICN3P32SC35I 3-F32T8 120/277V Electronic Ballast
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 ICN3P32SC35I 3-F32T8 120/277V Electronic Philips Advance Manufacturer Description Weight per unit Product Category Features
ELECTRONIC FLUORESCENT BALLASTS
ELECTRONIC FLUORESCENT LLSTS Fluorescent allasts Optanium mbistar SmartMate Standard T5HO PureVOLT 1 ELECTRONIC FLUORESCENT LLSTS Fluorescent allasts Fluorescent allasts - - Optanium High-efficiency electronic
ELECTRONIC FLUORESCENT BALLASTS
ELECTRONIC FLUORESCENT LLSTS Fluorescent allasts Optanium mbistar SmartMate Standard T5HO PureVOLT 1 ELECTRONIC FLUORESCENT LLSTS Fluorescent allasts Fluorescent allasts - - Optanium High-efficiency electronic
VEL2S40SC35I 2 F34T12 277V Electronic Ballast
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 VEL2S40SC35I 2 F34T12 277V Electronic Ballast Philips Advance Catalog VEL2S40SC35I Manufacturer Philips Advance Description
ELECTRONIC HID BALLASTS
Overview Just as electronic ballast technology enhanced fluorescent lighting systems, electronic HID ballasts bring significant performance improvements to HID lighting systems: Higher efficiency Greater
VEL2P75S35I 2-F96T12 277V Electronic Ballast
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 VEL2P75S35I 2-F96T12 277V Electronic Ballast Philips Advance Catalog Number VEL2P75S35I Manufacturer Philips Advance Description
Philips-Advance High Efficiency Ballasts & Energy-Saving Ballast Strategies
Philips-Advance High Efficiency Ballasts & Energy-Saving Ballast Strategies Bob Trate - CPMR Philips/Advance Ballasts April 20, 2010 Fluorescent Ballast Overview There are several generations and design
ELECTRONIC HID BALLASTS
ELECTRONIC HID S CONTENTS 228 229 229 230 23 How to Read a Table Ceramic Discharge Metal Halide Ballasts Dimensions and Wiring Diagrams Cross Reference Guide Specifications HOW TO READ AN ELECTRONIC HID
TVE Overview. Lighting Management Dimming. Fluorescent Dimming Ballasts
TVE Overview Eco-0TM TVETM 0% TVE () 02.9.04 The (Eco-0) TVE is a 0% fluorescent dimming ballast for applications using a 0-0V control. TVE ballasts are also designed to work seamlessly with 0-0V lighting
ELECTRONIC FLUORESCENT BALLASTS
Ordering Information How to Order Philips Lighting has developed the industry s broadest distribution system for electronic ballasts. More than 000 stocking distributors nationwide. For information on
T5 versus T8 Fluorescent Lamps. The good, the bad, & the ugly about T8 and T5 lamps
T5 versus T8 Fluorescent Lamps The good, the bad, & the ugly about T8 and T5 lamps Association of Energy Engineers- Cleveland Chapter Tuesday, February 22, 2005 Presented by: Lewis S. Sternberg, LC Consultants
EcoSystemR Multiple Control Input Ballasts
EcoR Multiple Control s 369454h 1 09.15.14 Digital electronic dimming ballasts maximize the benefits of a lighting management system. EcoR s offer 100% to 10% dimming; ideal for use where saving energy,
Compact SE Overview. High-Performance Dimming. Ballast
Compact SE Overview CompactSE 01.10.10 For designs requiring the energy savings and aesthetic appeal of dimmed T4 compact fluorescent or T5 twin-tube lamps, Compact SE dimming ballasts are your solution.
3-Wire Control, 220/240 Volt T-8 Linear, T-4 Quad Tube and T-5 Twin Tube Lamps
3-Wire Control, 220/240 Volt T-8 Linear, rev hi-220-240-1b 1.10.02 2.38 w (60mm) x 1.50 h (38mm) x 9.50 l (241mm) HOT DIMMED HOT NEUTRAL Hi-lume Power Control Dimming Ballast Lamps DESCRIPTION Continuous,
Compact SE Overview. High-Performance Dimming. Ballast
allast Compact SE Overview CompactSE- 03.08.04 or designs requiring the energy savings and aesthetic appeal of dimmed T4 compact fluorescent or T5 twin-tube lamps, Compact SE dimming ballasts are your
Electronic Ballast Update. Schaedler/YESCO EXPO 2008 Presented by Rock Weinrich, Joseph E. Biben Sales Corporation
Electronic Ballast Update Schaedler/YESCO EXPO 2008 Presented by Rock Weinrich, Joseph E. Biben Sales Corporation Electronic Ballast Timeline 2 nd generation - Centium RCN- VCN dedicated voltage, Mark
EcoSystem Multiple Control Input Ballasts
Eco Five Control Digital Dimming s Eco Multiple Control s 369454l 1 09.02.16 Digital electronic dimming ballasts maximize the benefits of a lighting management system. Eco s offer 100% to 10% dimming;
FDBT S 32W120V DM Bal
3804 South Street 75964-763, TX Nacogdoches Phone: 936-569-794 ax: 936-560-4685 llenwatson@elliottelectric.com DT430S 3W0V DM al Catalog Number Manufacturer Description Weight per unit Product Category
Distribution Restriction Statement Approved for public release; distribution is unlimited.
CEMP-ET Engineer Technical Letter 1110-3-441 Department of the Army U.S. Army Corps of Engineers Washington, DC 20314-1000 Engineering and Design ELECTRONIC BALLASTS FOR FLUORESCENT LIGHTING FIXTURES ETL
Lighting Electronics Atlas
Lighting Electronics Atlas Full Line Catalog 2010-2011 Lighting Electronics Atlas Full Line Catalog 2010-2011 Contents Electronic Fluorescent s 1-1 to 1-69 Electronic Fluorescent Controllable s 2-1 to
MasterColor CDM-R111 70W/830 10D 1CT
MasterColor CDM-R111 70W/830 10D 1CT Product family description Philips MasterColor CDM-R111 combines the trendy look of the 111mm aluminum reflector halogen lamps with the long life, high energy efficiency
Different ways. The Dynadimmer and the Chronosense. Public outdoor lighting has an important function in making outdoor activities after sunset
Different ways The Dynadimmer and the Chronosense Public outdoor lighting has an important function in making outdoor activities after sunset possible in a safe and comfortable way. For a long time controlling
Philips LEDstick V Compact Brightness 88% LEDstick
LEDstick Philips LEDstick 22-24V Compact Brightness Philips LEDstick deliver high quality light in a compact design ideal for downlights and slim luminaire applications. Philips LEDstick offers over 88%
Electronic Fluorescent Ballasts
Electronic Fluorescent Ballasts A Complete Range of Solutions From The Name You Trust For more than 30 years, the lighting industry has relied on our TRIAD brand for the most specified, most installed,
Ecosystem 5 Percent 3-Wire and Ecosystem Digital Link Controlled T4 Compact, 1 Lamp, Ballast Factor Of 0.95, K-Can, Studded, 26/32W
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 EC3DT4MWKU1S 26/32W T4 1LMP Ba Lutron Catalog Number Manufacturer Description Weight per unit Product Category EC3DT4MWKU1S
EcoSystem Multiple Control Input Ballasts
Eco Multiple Control s Eco s 1 06.25.10 Digital electronic dimming ballasts maximize the benefi ts of a lighting management system. Eco s offer 100% to 10% dimming; ideal for use where saving energy, increasing
INSTANT START BALLASTS
ULTRAMAX INSTANT START BALLASTS GE Consumer & Industrial TRANSFORMING THE POWER OF LIGHT Take Energy Savings to the MAX with Take Energy Savings to the MAX with High Efficiency Electronic Ballasts NEW
QUICKTRONIC ICE Universal Voltage Systems
QUICKTRONIC ICE Universal Voltage Systems Electrodeless Fluorescent Systems Lamp / Ballast Guide lamp: ICE 40W QT1x40ICE/UNV lamp: ICE 70W QT1x100ICE/UNV lamps: ICE 100W QT1x100ICE/UNV QT1x150ICE/UNV lamp:
3-Wire Control, 120, 277 Volt T5 Twin Tube Compact Lamps, T4 Quad Tube and T4 Triple Tube
3-Wire Control, 120, 277 Volt, T4 Quad Tube and T4 Triple Tube rev hi-compact-1a 3.7.01 2.38 w (60mm) x 1.50 h (38mm) x 9.50 l (241mm) T4 - One Lamp 3.00 w (76mm) x 1.00 h (25mm) x4.90 l (124mm) T4 - Two
RZT2S54 Electr DMMG Ballast
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 RZT2S54 Electr DMMG Ballast Philips Advance Catalog Number Manufacturer Description Weight per unit Product Category Features
OkSolar LED Outdoor Luminaires
OkSolar 488500 LED Outdoor Luminaires 1.0 PURPOSE The purpose of this specification is to provide the minimum performance requirements for the LED Outdoor Luminaire Fixture. This specification refers to
Philips MASTER LEDtube InstantFit Standard Output 1500mm
Philips MASTER LEDtube InstantFit Standard Output 1500mm The Philips MASTER LEDtube InstantFit is a technology breakthrough out of our LEDtube portfolio. This product is compatible with electronic ballasts
The right components for your application
Product Catalog The right components for your application 08-09 Atlas full line guide to conventional lighting Table of contents - TLED Drivers - Electronic Fluorescent allasts 3- Fluorescent Controllable
IZT2S32SC 2 Lamp 32/T8 Dimmable Ballast
IZT2S32SC 2 Lamp 32/T8 immable Ballast Philips Advance Catalog Number Manufacturer escription Weight per unit Product Category IZT2S32SC Philips Advance Electronic Ballast, High Frequency; Programmed Start;
Portfolio innovative LED systems. Fortimo and Lexel
Portfolio innovative LED systems Fortimo and Lexel June 2011 Fortimo LED DLM system a LED breakthrough in energy efficiency and higher lumen packages (lm Fortimo LED DLM range, please see (hrs Fortimo
Table of Contents T8 Instant Start Ballasts
Table of Contents T8 Instant Start Ballasts gelighting.com Ballasts Understanding T8 Fluorescent Ballasts...10-2 Understanding Fluorescent Systems...10-3 Fluorescent Ballast Application Notes...10-5 UltraMax
ELECTRONIC FLUORESCENT BALLASTS
Ordering Information How to Order Philips Lighting has developed the industry s broadest distribution system for electronic ballasts. More than 3000 stocking distributors nationwide. For information on
Nema Head We light your world
Nema Head We light your world 03.15.18 THD 80 PF >.95 10kV Surge Protector + 5-40 C~50 C 35,000 Warranty YEAR LED Nema Head 44w/65w Advances in LED technology allow us to create
Ballast Technology & Specification Guide SYLVANIA QUICKTRONIC Electronic Ballasts
Ballast Technology & Specification Guide SYLVANIA QUICKTRONIC Electronic Ballasts SEE THE WORLD IN A NEW LIGHT OSRAM SYLVANIA, the global leader in lighting systems, is committed to providing ballasts
Reliability with the most essential intellect. Philips HF-Essential Electronic ballasts for TL5 lamps
Reliability with the most essential intellect Philips HF-Essential Electronic ballasts for TL5 lamps HF-Essential - Reliability with the most essential intellect Electronic ballasts for TL5 lamps The cost-saving
American Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 200 Vdc 4 Low Profile 4 High Regulation 4 Ultra Wide Input Ranges (9-36Vdc, 20-60Vdc, 36-72Vdc) 4 1000 Vdc Output Isolation 4 Continuous Short Circuit
FastFlex LED module Gen 2. Flexible system design and brilliant optical control. KiwiLighting.com
FastFlex LED module Gen 2 Flexible system design and brilliant optical control KiwiLighting.com Philips FastFlex LED module offers high-quality, reliable, easy-to-use outdoor LED illumination for roads
GC SERIES HORTICULTURAL LIGHTING SYSTEM
It s the RIGHT Choice 5008685 GC SERIES HORTICULTURAL LIGHTING SYSTEM US ER MANU A L & I NS T R U C TI ONS GC-1000 HPS/MH/CMH A dva n c e d U lt r a Hig h Frequency Technology Compatibe with 1000W DE HPS
ELECTRONIC FLUORESCENT BALLASTS
Ballast Life Philips Advance fluorescent electronic and magnetic ballasts are designed and manufactured to engineering standards correlating to an average life expectancy of 50,000 hours of operation at
GC SERIES HORTICULTURAL LIGHTING SYSTEM
It s the RIGHT Choice GC SERIES HORTICULTURAL LIGHTING SYSTEM US ER MANU A L & I NS T R U C TI ONS GC-630NS Advanced Low Frequency Square Wave Technology 315W CMH Grow Lamps Included PACKAGE INCLUDES 2
Street LEDGINE. CitySpirit Street - CitySoul - MileWide
CitySpirit Street - CitySoul - MileWide 2 Street LEDGINE - Product guide Street LEDGINE The unique Philips solutions for LED street lighting, which fulfill all requirements: Long-lasting design Complete
Switch to safe living. Lifestyle modular switches with protective technology
co m Ka Ph nc h. Em no an ai.-2 En l id 53 e - e 3 3 terp @ 22 ris ka 6 es nc / 4 ha 76 na 6 na nd. Switch to safe living Lifestyle modular switches with protective technology Price effective 1 July, 2010
Hi-lume Overview. EcoSystem Hi-lume 1% Architectural Dimming
cosystem Hi-lume % rchitectural imming Hi-lume Overview 369-398c 06.04. Hi-lume architectural electronic dimming ballasts are designed to meet the most demanding lighting requirements. y providing industry
ELECTRONIC FLUORESCENT BALLASTS
ELECTRONC FLUORESCENT S Ballast Life Philips Advance fluorescent electronic and magnetic ballasts are designed and manufactured to engineering standards correlating to an average life expectancy of 50,000
Energy Solutions LED Accelerator Program
Energy Solutions LED Accelerator Program Product Qualification Statement I hereby certify that the LED lighting product (Product) listed below meets all applicable general and specific criteria for qualification
Certifications. Catalog. CFQ13W/G24q - 13W CFL Quad Tube Lamp (PL-C13W/4P, F13DBX/4P, CF13DD/E)
T4 HIGH FREQUENCY BALLASTS 0.43 230 ICF-2S26-XX-XX* 0.22 277 0.19 () CFQ13W/G24q - 13W CFL Quad Tube Lamp (PL-C13W/4P, F13DBX/4P, CF13DD/E) 0.13 1 13 0/-18 230 ICF-2S13-XX-XX* 0.07 16 1.00 277 0.06 0.25
TownGuide Core. Easy to choose, easy to use
TownGuide Core Easy to choose, easy to use Contents The TownGuide Core family 3 Easy to choose 3 Easy to use 3 Family Range 4 Lighting performance 5 Optics 5 Applications 6 Application examples 7 Components
The power behind today s lighting designs
The power behind today s lighting designs Electronic HID: Driving performance in specification Unlocking the performance potential Electronic high intensity discharge (ehid) lighting is becoming an increasingly
Installation/Operating Instructions
1000 DE BOSS COMMERCIAL FIXTURE Installation/Operating Instructions 600W 750W 1000W Turbo 825W 1000W 1150W 750W INPUT RC 660W SIG A 600W SIG B www.sunlightsupply.com INCLUDES CONVERTIBLE SMART VOLT DUAL
American National Standard for Lighting Equipment Voltage Surge Requirements
American National Standard for Lighting Equipment Voltage Surge Requirements Secretariat: National Electrical Manufacturers Association Approved: December 21, 2017 American National Standards Institute,
EnergyCalc. Saving energy with sustainable lighting solutions from Grainger
EnergyCalc Saving energy with sustainable lighting solutions from Grainger Smart thinking Upgrading your lighting systems is one of the easiest and most cost-effective ways to reduce your facility s electricity
Max. Input Power (W) Inrush Current (A pk /µs)
Output Power (W) Output Voltage (V) Output Current (A) Tcase Max 150 60~210 0.70 80 C Wiring Diagram Input Current 1.4A@120VAC 0.6A@277VAC 0.67A@250VDC Max. Input Power (W) Inrush Current (A pk /µs) Max.
UL AND CODE COMPLIANCE
BAL500 FLUORESCENT EMERGENCY BALLAST 500 Lumens APPLICATION The BAL500 fluorescent emergency ballast works in conjunction with the AC ballast to convert new or existing fluorescent fixtures into emergency
PC T8 TEC, W PC TEC
T8 TC-L PC T8 TEC, 18 58 W PC TEC Product description CELMA Energy Efficiency Index A2 Nominal life time up to 30,000 h (at ta 50 C with a failure rate max. 0.3 % per 1,000 h) Large temperature range (for
LIGHTING SPECIFICATIONS
Incentives: Specifications LIGHTING SPECIFICATIONS All lighting projects are expected to comply with the Illuminating Engineering Society of North America (IESNA) recommended lighting levels or the local
Installation/Operating Instructions
RETURNING UNITS Please contact your retail store for returns. WARRANTY This unit, when properly used will provide you with years of service. It is covered under a 3 year warranty (902210-400 Watt and 902230-1500W/240V
FL ballasts Electronic fixed output PC T8 TEC, W PC TEC T8
T8 TC-L PC T8 TEC, 18 58 W PC TEC T8 Product description CELMA Energy Efficiency Index A2 Nominal life time up to 30,000 h (at ta 50 C with a failure rate max. 0.3 % per 1,000 h) Large temperature range
ICETRON ECOLOGIC Inductively Coupled Fluorescent System
www.sylvania.com ICETRON ECOLOGIC Inductively Coupled Fluorescent System Key Features & Benefits Unparalleled lamp life 100,000 hour life 10 years of continuous operation White light 3500K, 4100K, 5000K
2011 DOE Fluorescent Ballast Rulemaking. Susan Isenhour Anderson Manager of Energy Relations OSRAM SYLVANIA July 2012
2011 DOE Fluorescent Ballast Rulemaking Susan Isenhour Anderson Manager of Energy Relations OSRAM SYLVANIA July 2012 New U.S. DOE Fluorescent Ballast Standards 2011 DOE Fluorescent Ballast Rulemaking Finalized
Heritage of Quality and Reliability
Heritage of Quality and Reliability PROVEN ENGINEERING AND MANUFACTURING 1980s Electronic Ballast designs pioneer electronics in lighting 2010 Generation 2 LED Drivers improve upon efficiency and costs
Product range 2010 /11. isolde the new generation of Philips tanning lamps
Product range 2010 /11 isolde the new generation of Philips tanning lamps Tanning is pure joy of life The isolde product range, the new generation of Philips tanning lamps, provides a sophisticated choice
Installation/Operating Instructions
Installation/Operating Instructions LEC 315 COMMERCIAL ETELLIGENT INCLUDES CONVERTIBLE SMART VOLT DUAL FERRITE POWER CORD easily converts into either a 120 or 208/240 volt 6.5 foot power cord ETELLIGENT
L I G H T W A V UV Electronic Ballast E 2010
L I G H T W A V UV Electronic Ballast 2010 E LIGHTWAVE High Frequency Electronic Ballast Function of an UV ballast To provide the proper voltage and current such that a steady plasma can be established
The right components for your application
Product Catalog The right components for your application 016-017 Atlas Full Line Guide to LED Drivers, LED Modules, allasts and Lighting Controls Table of contents 1-1 LED Drivers -1 LED Modules 3-1 Electronic
HIGH INTENSITY DISCHARGE BALLASTS
Philips Advance ballasts are available to operate the wide variety of metal halide, high pressure sodium and low pressure sodium lamps available in today s marketplace. Like fluorescent, lamps are gas
FL ballasts Electronic fixed output
PC PRO lp, PC PRO sl, 18 58 W PC PRO Product description Highest possible CELMA Energy Efficiency Index EEI = A2 BAT 21 0 Nominal life up to 100,000 h (at ta. 50 C with a failure rate max. 0.1 % per 1,000
Electronic ballasts for fluorescent lamps Multi-lamp ECG. PC T5 PRO-M lp, W T5, T8, compact (CFL) and T5c circular fluorescent lamps
T5 T8 TC-F TC-L T5c PC T5 PRO-M lp, 14 80 W T5, T8, compact (CFL) and T5c circular fluorescent lamps Product description Integrated lamp detection Operation of T5 lamps of the same length Average life
American Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Ultra Wide Input Ranges (936Vdc, 2060Vdc) 4 Efficiency 85% (typ.) 4 Independently Isolated Outputs 4 SixSided Shielded Case 4 Remote On/Off Control 4 Continuous
FL ballasts Electronic fixed output. PC T5 TOP lp, W PC TOP T5
EL T5 TC-L PC T5 TOP lp, 1 5 W PC TOP T5 Product description CELMA Energy Efficiency Index A2 Nominal life up to 50,000 hours (at ta. 50 C with a failure rate max. 0.2 % per 1,000 hours) Large temperature
SubstiTUBE IPS LED T8
www.sylvania.com/led SubstiTUBE IPS LED T8 Compatible LED T8 for use with instant start and select programmed rapid start electronic T8 ballasts Key Features & Benefits Optimized glass optics available
F5 Platforms: FIPS Kit Installation MAN
F5 Platforms: FIPS Kit Installation MAN-0647-00 Table of Contents Table of Contents About the FIPS kit...5 Supported platforms...5 Apply tamper evidence seals to F5 platforms...5 Legal Notices...9 3 Table
FL ballasts Electronic fixed output
T8 PC T8 PRO lp, PC T8 PRO sl, 18 58 W PC PRO T8 Product description Highest possible CELMA Energy Efficiency Index EEI = A2 BAT 21 0 Nominal life up to 100,000 h (at ta. 50 C with a failure rate max.