EDGE TILTABLE LINEAR LED

Transcription

1 EKLIPSE EDGE - V2015 / 2 - EN - SPECIFICATION 1 EDGE

2 CHARACTERISTICS EDGE is an adjustable LED linear luminaire primarily used for vaulted surfaces. Its distinctive pivoting mechanism was developed for improving lighting control in atypical environments such as stairs or vaulted ceilings. ith one simple movement, you can align, by directing all light beams together, your light perfectly perpendicular to the floor. Its great advantage also lies in the fact that each increment can be separately adjustable, thus allowing for customized lighting effects. APPLICATIONS EDGE is composed of six high-power LEDs in an aluminum linear extrusion with an integrated heat sink. Field adjustable it is set up directly onsite, thanks to a wheel which is easy to reach at all times. This characteristic gives the possibility to adjust the tilt angle up to 45, both to the left and to the right. ELECTRICAL PHYSICAL SOURCE AND OPTICS EKLIPSE EDGE - V2015 / 2 - EN - SPECIFICATION 1 INPUT Available from 3/ft to 12/ft in increments of 0.5/ft. REMOTE POER SUPPLY 24V: Eklipse PSB IRING 48 length (1.2 m) - 18 AG wire lead with AGO quick connector. THERMAL CONTROL Through constant thermal monitoring and current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment. CONSTRUCTION High thermal conductive extruded aluminum, forged aluminium heatsink and pivot mechanism in steel and aluminium. LIGHT ENGINE High powered LED mounted on MCPCB, high performance aluminium forged pin heat sink. Secondary TIR optic. ADJUSTMENT 45 light angle adjustment, from linked mechanism. FINISH Anodized black outside / painted white inside or outside / inside painted white. * LIGHT SOURCE High power LEDs. LIGHT TEMPERATURE 2700K, 3000K, 3500K, 4000K. * OPTICS 10, 27, 49, 10 x50. * Available for tailor-made application. Please contact your Eklipse representative for further informations.

3 NOMINAL DIMENSIONS APPLICATIONS MOUNTING OPTIONS SURFACE GRAZING X Y Magnetic insert (MI) Z VAULTED CEILING EKLIPSE EDGE - V2015 / 2 - EN - SPECIFICATION 2 X Extrusion available various lengths up to 90 (2286 mm). Refer to ordering code. Nominal dimensions do not include mounting options. Y Z (51 mm) (41 mm) Pivot inside leg cap (PILC) Inside short leg cap horizontal (ISLCH) Inside leg cap horizontal (ILCH)

4 LIGHT ADJUSTMENT EDGE can be installed on vaulted ceilings up to 45 angle. Designed to be field adjustable while lit, simply by pivoting the adjustment dial to the desired angle. The mechanism pivots 20 of linear light at a time. For example, if your EDGE fixture is 60 long, it will be equipped with three adjustment dials. EKLIPSE EDGE - V2015 / 2 - EN - SPECIFICATION 3 Once tilted light beam becomes perfectly perpendicular to the floor. Each increment is individually tiltable and enables to create custom light direction and ambiance.

5 GENERAL ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL VOLTAGE ATTAGE E - 24V E = EDGE 24V = 24 volts LENGTH END CAP IRING OPTICS COLOR 40 - PILC - L K Lengths in inches. Bracket thickness not included. ILCH = Inside Leg Cap Horizontal ISLCH = Inside Short Leg Cap Horizontal PILC = Pivot Inside Leg Cap MI = Magnetic Insert L = Left 10 = 10 27K = 2700K R = Right 27 = 27 30K = 3000K 49 = 49 35K = 3500K 10X50 = 10 x 50 40K = 4000K CUS = Custom FINISH - ABK ABK = Anodized black H = Painted white CUS = Custom Final Eklipse ordering code: E - 24V PILC - L K - ABK EKLIPSE EDGE - V2015 / 2 - EN - SPECIFICATION 4 INSTALLATION NOTES ARRANTY Five (5) years on parts. APPROVAL Approved CSA / UL rue Moreau, Suite 100 Montréal, Qc, H1 2M3 t f e. sales@eklipselighting.com w. SPECIFICATIONS MAY VARY, ITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL IN- FORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN HOLE OR IN PART, ITHOUT RIT- TEN PERMISSION IS ILLEGAL.