TZ-8 Limit Switch. Features. Contact Form NO NC. Characteristics. Operation speed Operating frequency Shock. Humidity. Life

Size: px

Start display at page:

Download "TZ-8 Limit Switch. Features. Contact Form NO NC. Characteristics. Operation speed Operating frequency Shock. Humidity. Life"

Maximilian McLaughlin
6 years ago
Views:

TZ8 Limit Switch Features Double circuit type of limit switch Highly rigid construction, consists of intensive plastic and aluminum cast (Head and cover snugly fit in box) Small volume, waterproof

1 TZ8 Limit Switch Features Double circuit type of limit switch Highly rigid construction, consists of intensive plastic and aluminum cast (Head and cover snugly fit in box) Small volume, waterproof and oilproof construction Builtin basic switch with double spring mechanism, longer mechanical life Smooth operation with greater OT Easytowire circuit opening design Wide varity of actuators, easily use Contact Form NO NC () () () (2) NO NC Ratings Rated voltage 2VAC 20VAC 00VAC 8VDC VDC 0VDC 2VDC 20VDC Noninductive Load (A) Resistance Load Inductive Load (A) Lamp Load Inductive Load Motor Load NC NO NC NO NC NO NC NO Characteristics Operation speed Operating frequency 0.mm0cm/sec Mechanical: 20 operations/minute Electical: 0 operations/minute Contact resistance 2m max. (initial value Insulation resistance 0m min. at 00VDC 00VAC, 0/0 HZ for minute between terminals of the same polarity Dielectric strength 00VAC, 0/0 HZ for minute between currentcarrying and noncurrentcarrying metal parts 00VAC, 0/0 HZ for minute between each terminal and ground Vibration HZ,.mm double amplitude Shock Mechanical durable:, 000m/Sec 2 (about 0G'S) Malfunction: 00m/Sec 2 (about 0G'S) Ambient temperature to + Inrush Current N.C: below 2A, N.O: below 2A NOTES:.Inductive load has a power factor of 0. min.(ac) and a time constant of 7 msec.max.(dc). 2.Lamp load has an inrush current of times the steadystate current,while motor load has an inrush current of times the steadystate current. Humidity Life Weight Degree of protection <9% RH Mechanical:,000,000 operations above Electrical: 00,000 operations above About to 90g IP Operating characteristics Models TZ8 TZ88 TZ87 TZ8 TZ82/822 TZ8/87/88/89 OF Max. 70g 70g 70g 900g 900g 0g RF Min. 0g 0g 0g 0g 0g PT Max mm.mm 0mm OT Min mm mm MD Max mm mm OP 2 mm 7 mm

2 TZ8 Limit Switch Appearance and dimension TZ8 TZ88 TZ87 TZ82 TZ8 TZ822 TZ8 TZ87 TZ88 TZ89 2

3 CSA Limit Switch Features Strong metal outer shell, swing arm max. 9 Long life (20, 000, 000 mechanical operations) Stainless steel idler wheel, punch and spring Selective PG cable gland Specifications Model CSA CSA00 CSA00 CSA02 CSA02 CSA0 CSA0 CSA07 CSA08 Operating force OF Max. 800g 800g 800g 00gcm 00gcm 0g 0g 0g Release force RF Min. 00g 00g 00g 0gcm 0gcm 0g 0g 0g Pretravel PT Max mm 0mm 0mm Tripping position TP % Movement differential MD Max. Over travel OT Min..0mm.0mm.0mm mm 20mm 20mm Total travel TT Min..8mm.8mm.8mm 9 9 0mm 0mm 0mm Rotary indexing Characteristics Double Break Mechanism Rated Voltage / Current Contact Resistance Insultation Resistance Dielectric Strength Electrical Life Mechanical Life Operating Speed Degree of Protection Ambient Temperature Rised Conformed Standards Operating Temperature Storage Temperature Ambient Operating Humdity Shock Resistance Vibration Frequency Terminal Screw Torsional Force Other Screw Torsional Force Bare Wire Diameter Cable Diameter INO+INC Force Break snap action ()A, 2, 20VAC / (2)A, 80VAC For inductance Load, Cos =0. 2m max. (initial value) 0m min. (at 00VDC) 00VAC, 0/0 HZ for minute between terminals of the same polarity 00VAC, 0/0 HZ for minute between currentcarrying and noncurrentcarrying metal parts 00VAC, 0/0 HZ for minute between each terminal and ground 00,000 at A 20VAC Resistive, 000, 000 operations min. (under rated conditions) mm/s to 0.m/s IP Max 0 over ambient temperature at rated voltage/current Cenelec EN 00, EN 007, IEC 7, VDE 00 ~+ (with no icing) ~+ (with no icing) 9 RH Max. Mechanical durable: 00m/s 2 min. Malfunction: 00m/s 2 min. Malfunction: to HZ,.mm double amplitude 8 kgfcm Cover 2 kgfcm/head 89 kgfcm/mounting 00 kgf/cm 2 Max 2 Max(IP if use cable 89)

4 CSA Limit Switch Appearance and dimension CSA00 CSA00 CSA02 CSA0 CSA02 CSA0 CSA07 CSA08

CLS Limit Switch Features Economical & plastic type Stainless steel roller, punch and spring Swing amplitude, extra large 9 o PG. cable gland that can be equipped.

5 CLS Limit Switch Features Economical & plastic type Stainless steel roller, punch and spring Swing amplitude, extra large 9 o PG. cable gland that can be equipped. Electrical life Specification Model CLS Operating force OF Max. 700g 700g 700g 00g 700g 00gcm 0g 0g 0g 00gcm Release force RF Min. 200g 200g 200g 0gcm 200g 0gcm 0g 0g 0g 0gcm Pretravel PT Max mm 0mm 0mm 20 Tripping position TP % Movement differential MD Max. Over travel OT Min..0mm.0mm.0mm 7.0mm 7 20mm 20mm 20mm 7 Total travel TT Min..8mm.8mm.8mm 9.8mm 9 0mm 0mm 0mm 9 Rotary indexing Characteristics Double Break Mechanism Rated Voltage / Current Contact Resistance Insultation Resistance Dielectric Strength Electrical Life Mechanical Life Operating Speed Degree of Protection Ambient Temperature Rised Conformed Standards Operating Temperature Storage Temperature Ambient Operating Humdity Shock Resistance Vibration Frequency Terminal Screw Torsional Force Other Screw Torsional Force Bare Wire Diameter Cable Diameter INO+INC Force Break snap action ()A, 2, 20VAC / (2)A, 80VAC For inductance Load, Cos =0. 2m max. (initial value) 0m min. (at 00VDC) 00VAC, 0/0 HZ for minute between terminals of the same polarity 00VAC, 0/0 HZ for minute between currentcarrying and noncurrentcarrying metal parts 00VAC, 0/0 HZ for minute between each terminal and ground 00, 000 at A 20VAC Resistive, 000, 000 operations min. (under rated conditions) mm/s to 0.m/s IP Max 0 over ambient temperature at rated voltage/current Cenelec EN 00, EN 007, IEC 7, VDE 00 ~+ (with no icing) ~+ (with no icing) 9 RH Max. Mechanical durable: 00m/s 2 min. Malfunction: 00m/s 2 min. Malfunction: to HZ.mm double amplitude 8 kgfcm Cover 2 kgfcm/head 89 kgfcm/mounting 00 kgf/cm 2 Max. 2 Max.

6 CLS Limit Switch Appearance and dimension CLS CLS CLS CLS CLS CLS7 CLS2 CLS8 CLS27 CLS9

7 CLS Limit Switch CLS0 CLS CLS0 CLS CLS CLS7 CLS2 CLS8 CLS27 CLS9 7

CWL Limit Switch Features Doublecircuit type of limit switch, is widely used With strong aluminum cast outer shell High mechanical strength Waterproof, oilproof construction Structure preventing oil,

8 CWL Limit Switch Features Doublecircuit type of limit switch, is widely used With strong aluminum cast outer shell High mechanical strength Waterproof, oilproof construction Structure preventing oil, water and pressure Indicating plate with setting position is installed in it, so it is easy to maintain Various of actuators is taken convenience for using Builtin contact stand has doublespring, so it has long mechanical life Contact Form NO () () NC () (2) NO NC Ratings Rated voltage 2VAC 20VAC 80VAC 00VAC 8VDC VDC 0VDC 2VDC 20VDC Noninductive Load (A) Resistance Load NC NO NC NO NC NO NC NO Inductive Load (A) Lamp Load Inductive Load Motor Load NOTES:.Inductive load has a power factor of 0. min.(ac) and a time constant of 7 msec.max.(dc). 2.Lamp load has an inrush current of times the steadystate current,while motor load has an inrush current of times the steadystate current. Characteristics Operation speed mm2m/s Operating frequency Mechanical: 20 operations/minute Electical: 0 operations/minute Contact resistance m max. (initial value Insulation resistance 0m above at 00VDC 00VAC, 0/0 HZ for minute between terminals of the same polarity Dielectric strength 00VAC, 0/0 HZ for minute between currentcarrying and noncurrentcarrying metal parts 00VAC, 0/0 HZ for minute between each terminal and ground Vibration HZ,.mm double amplitude Shock Mechanical durable:, 000m/Sec 2 (about 0G'S) Malfunction: 00m/Sec 2 (about 0G'S) Ambient temperature to +80 Humidity <9% RH Life Mechanical:,000,000 operations above (under rated OT) Electrical: 00,000 operations above Weight About 27g Degree of protection IP7 Operating characteristics Models OF Max. RF Min. PT Max. OT Min. MD Max. TF Max. TT Min. CWLCA22 CWLD2 CWLNJ CWLNJS2 CWLCA22Q CWLCL CWLCA2 CWLD CWLNJ2 CWLNJ0 CWLD 0g 227g 20 O 0 O 2 O 2720g 2720g 9g.7mm.mm mm 0g 28mm 29g 28mm 0g 227g 20 O 0 O 2 O 2720g 2g 28g 20 O 0 O 2 O 200g 200g O O 2720g 9g.7mm.mm mm 20g 28mm 80g 28mm 2720g 9g.7mm.mm mm 2720g 0 O. mm 0 O 0 O OP:90 o OP: 2.8mm. mm CWLD 2720g 9g.7mm.mm mm 2720g 9 mm 8

9 CWL Limit Switch Appearance and dimension CWLCA22 CWLCA22Q CWLCA2 CWLCL CWLD CWLD 9

10 CWL Limit Switch CWLD2 CWLD CWLNJ CWLNJ0 CWLNJ2 CWLNJS2

CHL Limit Switch Features Metallic bottom shell Stainless steel roller, punch and spring Strong electric property A, 20V, for 00,000 times Electrical life Specification Models CHL 000 00 00 0 200 220

11 CHL Limit Switch Features Metallic bottom shell Stainless steel roller, punch and spring Strong electric property A, 20V, for 00,000 times Electrical life Specification Models CHL Operating force OF Max. 70gcm 70gcm 70gcm 70gcm 900gcm 900gcm 0g 0g 0g 0gcm Release force RF Min. 0gcm 0gcm 0gcm 200g 200g 200g 0g 0g 0g 0gcm Pretravel PT Max. 20 O 20 O 20 O 0mm 0mm 0mm 20 Tripping position TP % O O O Movement differential MD Max. O O O Over travel OT Min. 7 O 7 O 7 O.0mm.0mm.0mm 20mm 20mm 20mm 7 Total travel TT Min. 9 O 9 O 9 O.8mm.8mm.8mm 0mm 0mm 0mm 9 Characteristics Double Break Mechanism Rated Voltage / Current Contact Resistance Insultation Resistance Dielectric Strength Electrical Life Mechanical Life Operating Speed Degree of Protection Ambient Temperature Rised Conformed Standards Operating Temperature Storage Temperature Ambient Operating Humdity Shock Resistance Vibration Frequency Terminal Screw Torsional Force Other Screw Torsional Force Bare Wire Diameter Cable Diameter INO+INC Force Break snap action ()A, 2, 20VAC / (2)A, 80VAC For inductance Load, Cos =0. 2m max. (initial value) 0m min. (at 00VDC) 00VAC, 0/0 HZ for minute between terminals of the same polarity 00VAC, 0/0 HZ for minute between currentcarrying and noncurrentcarrying metal parts 00VAC, 0/0 HZ for minute between each terminal and ground 00,000 at A 20VAC Resistive, 000, 000 operations min. (under rated conditions) mm/s to 0.m/s IP Max 0 over ambient temperature at rated voltage/current Cenelec EN 00, EN 007, IEC 7, VDE 00 ~+ (with no icing) ~+ (with no icing) 9 RH Max. Mechanical durable: 00m/s 2 min. Malfunction: 00m/s 2 min. Malfunction: to HZ.mm double amplitude 8 kgfcm Cover 2 kgfcm/head 89 kgfcm/mounting 00 kgf/cm 2 Max 9 Max(IP if use cable 89)

12 CHL Limit Switch Appearance and dimension CHL000 CHL220 CHL00 CHL00 CHL00 CHL0 CHL0 CHL8 CHL200 CHL9 2

TZ Sealed Limit Switch Features Builtin CM miniature limit switch, strong aluminum cast shell, design for waterproof and oilproof It is the same as CM micro switch in the rated value and

NO Operating characteristics Models TZ00 TZ002 TZ00 TZ00 TZ0 Models TZ TZ2 TZ TZ TZ OF Max. 20~0g 20~0g 70g 70g OF Max. 800g 00g 0g 0g RF Min. g g 70g 70g RF Min. 20g 0g 20g 20g PT Max. 0.mm 0.

13 TZ Sealed Limit Switch Features Builtin CM miniature limit switch, strong aluminum cast shell, design for waterproof and oilproof It is the same as CM micro switch in the rated value and characteristics Various of actuators that are taken convenience for using Each switch is equipped with cable fixator, including rubber boot, metallic washer, plastic screw nut Contact Form NC NO Operating characteristics Models TZ00 TZ002 TZ00 TZ00 TZ0 Models TZ TZ2 TZ TZ TZ OF Max. 20~0g 20~0g 70g 70g OF Max. 800g 00g 0g 0g RF Min. g g 70g 70g RF Min. 20g 0g 20g 20g PT Max. 0.mm 0.mm mm mm PT Max. 2mm mm mm mm OT Min..mm.mm mm mm OT Min. mm.mm mm mm MD Max. 0.0mm 0.0mm 0.mm 0.mm MD Max. 0.mm 0.2mm 0.mm 0.mm OP 8.2 mm 9.7 mm OP.8 mm 9.7 mm Appearance and dimension TZ00 TZ

14 TZ Sealed Limit Switch TZ00 TZ002 TZ TZ2 TZ TZ

CZ Compact Prewired Limit Switch Specifications DPDS limit switch for multiple applications. Rugged aluminum alloy diecast housing High mechanical strength.

15 CZ Compact Prewired Limit Switch Specifications DPDS limit switch for multiple applications. Rugged aluminum alloy diecast housing High mechanical strength. Oil resistance,waterproof and dustproof structure. Ratings Characteristics Rated voltage Noninductive load (A) Resistance load Inductive load (A) Lamp load Inductive load Motor load Rating Operating speed Operating frequency A 2V,A 20VAC mm~m/s Mechanical:20 operations/min. Electrical:0 operations/min. NC NO NC NO NC NO NC NO Contact resistance m max.(initial) 2 VAC 20 VAC (0.) Inslation resistance 0m min.(at 00VDC) 00VAC, 0/0 HZ for minute between terminals of the same polarity 8 VDC VDC 0 VDC 2 VDC 20 VDC (0.) (0.) (0.) Dielectric strength Vibration Frequency Shock 00VAC, 0/0 HZ for minute between currentcarrying and noncurrentcarrying metal parts 00VAC, 0/0 HZ for minute between each terminal and ground to HZ,.mm double amplitude Mechanical:Approx.00m/s 2 (Appprox.0G'S) Electrical:Approx.00m/s 2 (Approx.0G'S) Ambient temperature ~+70 Humidity Below 9%RH Life Mechanical.,000,000 operations/min. Electrical.200,000 operations/min. Degree of protection IEC:IP7 Weight Approx.0g(cable length m) Approx.0g(cable length m) Operating characteristics Models CZ CZ2 CZ CZ CZ CZ CZ2 CZ CZ9 OF Max. 200gf(.77N) 200gf(.77N) 200gf(.77N) 80gf(.9N) 200gf(.77N) 800gf(7.N) 800gf(7.N) 800gf(7.N) 0gf(.7N) RF Min. 0gf(.N) 0gf(.N) 0gf(.N) 0gf(.7N) 0gf(.N) 0gf(.N) 0gf(.N) 0gf(.N) PT Max. 2 OT Min. mm mm mm 0 mm mm mm mm MD Max. mm mm mm mm mm mm mm OP.7 mm 28. mm 28. mm 28. mm 2.9 mm. mm. mm

16 CZ Compact Prewired Limit Switch Appearance and dimension CZB CZ CZ2 CZ CZ CZ CZ2 CZ CZ CZ9

17 CZ Compact Prewired Limit Switch Fastening of the switch cable The switch bodies are filled with resin for sealing purposes. To avoid stressing the cable and switch body, fasten the switch at cm or farther away from the switch body, should the wire be bent, the bending radius shall be at least mm. Switch bank mounting A maximum of six switches may be mounted together as a switch bank.during the installation,the convex part of the switch back.the mounting panel shall be mm or thicker. Installation The service life and accuracy of switches will be effected by the shape of actuator operation frequency & over travel. So the angular of the fixing level should be about 0, the surface finish of the fixing level should be over, the hardness is from HV00~00. When installing, the position of the concave part should be above the standard panel Mounting Recommended tightening torque according to the follwing form. Model 2 Screw type M fastening screws M. installing screws Torque.~2lb.in (0~0kgf.cm).9~7.9lb.in (8~9kgf.cm) Contact types Mounting holes Mount the switch body to a rigid mounting panel using two M screws. 7

18 CZ9 Safety Key Interlock Switch Model designations CZ9 B PG 0 Designation.Type 2.Type of contact blocks fitted.conduit entries.actuating keys Signal CZ9 B C PG PT None Description Safety switch 2B(2NC) AB(NONC) PG.XP. PT/2XUNC None Horizontal Vertical Adjustable Ratings Characteristics Rated voltage Noninductive load (A) Resistance load Inductive load (A) Lamp load Inductive load Motor load Rating Operating speed Operating frequency Contact resistance A 20VAC (A00) 0.m ~0.m/s 0 operations/minute 2m max. (initial). NC NO NC NO NC NO NC NO Insulation resistance 0m min. (at 00VDC) 2 VAC 20 VAC 00 VAC 8 VDC VDC 0 VDC 2 VDC 20 VDC Rated insulation voltage(ui) Dielectric strength Vibration Shock Ambient temperature Ambient Humidity Life Degree of protection 00V AC200V/Umip KV to Hz, 0.mm double amplitude Mechanical: Approx. 00m/s 2 (Approx. 0G'S) Electrical: Approx. 00m/s 2 (Approx. 0G'S) 0 ~+70 Blow 9RH Mechanical:,000,000 operations/min. Electrical: 0,000 operations/min. IP(EN097) Shortcircuit protective device A fuse Weight Approx. 7g Use attention affair To prevent the wear and the space should be within mm between the key and middle of the insert hole. When in use,there should put a plate on the top to prevent the key overinsert.to prevent nonmovement,the space between the plate and the switch should be under mm. 8

CZ9 Safety Key Interlock Switch Required to have

BPT CPG CPT When the contact block get fire,press

leaving structure can push the contact block a

positive min. Positive opening travel min. 7.

19 CZ9 Safety Key Interlock Switch Required to have positive machine Appearance and dimension CZ9BPG BPT CPG CPT When the contact block get fire,press on the middle of the key structure, the NC strict leaving structure can push the contact block a way cut off the movement. Appearance and dimension Operating characteristics Key plug in force max. key pull out force max. Pretravel Total travel Force required to have positive min. Positive opening travel min. 7.N(,00gf) 29.2N(,000gf) mm (28mm) 8.8N(,000gf) mm CZ9BPG0 BPT0 CPG0 CPT0 CZ9BPG02 BPT02 CPG02 CPT02 CZ9BPG0 BPT0 CPG0 CPT0 CZ9K CZ9K2 CZ9K 9

Small Limit Switch D4V

Small Limit Switch D4V Small Limit Switch DV Compact Vertical Models Sized for Asian Standards Compact new design approximately / the size of OMRON vertical Limit Switches. Structure enables the terminal section to be fully