Quick Reference Chart

Transcription

1 AR-0

2 Quick Reference Chart Quick Reference Chart Kit# Spray Gun Repair Kits -88 Con Suc Gun -9 Gun - Gun Con. Suc/Press HVLP/ 9/ 00-0 MACH HVLP Press -8 MACH SL -- MG 0 TEKNA/SRIPro Air Valve Kit 0 TEKNA/SRIPro 00 TEKNA ProLite Air Valve Kit 0 TEKNA ProLite 80 StartingLIne Full Size 80 StartingLine Touchup DGR-K DAGR Airbrush FLG-80 FLG- FLG-88 FLG FLG-88-K FLG KK-08- MBC KK-98- JGA-0,0,0 & JGHV-0 & KK-0 GFG/GFHV KK-08- OMX - Major Kit KK-0- OMX - Minor Kit KK-0 EGA/EGHV KK-08- GTI, PLUS, PRI, JGA-0 SPK-0-K CVI Air Valve Kit SPK-0-K CVI SRI- SRI Kit# Cup Repair Kits & 80- SG KK-00 TGC/TLC Kit# Cup Gaskets / cc StartingLine 808 0cc StartingLine KB-80-K KB- KGP--K GFG/GFHV (white) GFC-0,0 & 0 KGP--K GTI/FinishLine (Blue) GFC-0, 0 & 0, PLUS, PRI, FLG, FLG TGC-9-K TGC-, TLC-, 8- & 8- TGS--K TGS Kit# Gravity Cup Liners OMX-0-K8 Any 0 oz., qt. or liter Kit# Spray Gun Strainers 8-8 Fluid Strainer Assy mesh WHITE 8-8 Fluid Strainer Assy 00 mesh BLUE 8-8 Fluid Strainer Assy 80 mesh RED 9-8 Fluid Strainers Assy 0 mesh Kit# Hose Sets KB-00 ft Air/Fluid Hose Set Kit# Fluid Regulator Repair KK- HGS series Kit# Air Regulator Repair -0 8-/ /8-0 KB-8- HARG-0 KK-9- HAR-0/HAR-0 KK-9 HAR-0/HAR- Kit# Agitator Air Motor KK-00- QS-00 (Air Motor) KK-00 QS-00 (Gear Box) Kit# Tank Gaskets 8-9 Old gal. Non-ASME Santoprene 8-0 Old gal. ASME Galv Santoprene PT-- 8C series QMS-80-8G series QM-8- Old, 0 / 9.8 gal. ASME Santoprene Kit# Liners ASME Gal (Zinc Plated) Tanks xx ( gal.) -9 8-xx ( gal.) PT- 8C series PT--K0 8C series PTL-0-K0 QMGT-, 8G-0, 8G-0 PTL-0-K8 QMGT-xxxx See page 9 for additional liners Kit# Disp. Anti-Stat Polyethylene Liners /80- qt. KK-0 KB--SS/ KB- qt. Kit# Clean-Air Replacement Elements HAF- -00 HAF- HAF-0 HAF-8 HAF-0 HAF- HAF- Kit# Waterborne Air Dryer 0 Filters for 00,09 0 Bracket and Knob Kit for 09 0 Arm, Brkt and Knob Kit for 09

3 Table of Contents Table of Contents Quick Reference Chart... TEKNA... Gravity Guns... Gravity Cups and Liners... Suction Guns and Cups... 0 Pressure Guns... Airbrush and Accessories... Disposable Cups and Accessories... 8 Pressure Tanks and Cups... 9 Air Control... 8 Air Regulators... 9 CamAir Automatic Drain... 0 Air Filtration Service... Properly Piped Shop... Hose and Fittings... Air Regulators & Gun Mounted Air Adjusting Valves... Breathable Air and Respirators... 0 Waterborne Air Dryer... Clean Solutions... Maintenance and Accessories... 8 Gauge Reference Chart... Troubleshooting.... 9

4 TEKNA Guns and Accessoriessories TEKNA ProLite GRAvITy spray GuN Models Available! able! Cupped or Uncupped Includes: HAV- air adjusting valve ve with digital gauge Gun wrench Color identification rings Additional fluid tips QuickClean coating * TEKNA ProLite Basecoat/Clearcoat Gravity Feed Spray Guns Fluid Tips Cup s 0*. &. mm Uncupped TE0, HV0 0*.,.,. mm Uncupped TE0, TE0 0.,.,. mm 900 cc Aluminum TE0, TE0 * Uncupped guns include disposable cups adapter TEKNA ProLite s HV0 air cap (HVLP) Base coats, clearcoats Order/Model No PSI inlet for HVLP approved areas -" EPA Compliant. Approved in most HVLP areas. HAV- EPA and SCAQMD Approved * Waterborne compatible when using a plastic or disposable cup system. 0 0, 0 TE0 air cap (HE) TE0 air cap (HE) Fluid Tips Base coats, low solids clearcoats Order/Model PSI inlet Base coats, high solids clearcoats Order/Model PSI inlet.mm,.mm,.mm,.mm -" -" Refer to Technical Bulletin: TB-008 Replacement Application 00 Base coats Clearcoats 08 Base coats, low solids clearcoats 09 Base coats, high solids clearcoats Fluid Nozzle Torque to - ft-lbs (8-0 Nm) HV0 TE0 TE0 Recommended Inlet Pressure BAR/PsI.. bar 0 psi.. bar 0 psi..8 bar psi Air Flow LPm/sCFm LPM.. CFM LPM..0 CFM 0 LPM 9 CFM Air Inlet Torque to ft-lbs (0Nm) Use medium strength thread sealant (i.e. Devon # Blue or equivalent) on threads Fluid Nozzles Fluid Nozzle on Fluid Nozzle 0 PRO PRO PRO PRO-00-. Tip size (mm) Ref # Description Part # Qty Retaining Ring Slip Ring Retaining Clip 99 Retaining Ring Seal Aircap & Ring Chart Retaining Ring & Seals 0 8 Fluid Nozzle Chart 9 Spray head *0 Spray head Seal 0 Spray head kit 09 * Circlip Valve Body * O Ring * Spreader Valve Pin Spreader Valve Adjusting Knob Spreader Valve Assembly 00 8 Front Valve Seal 9 Valve Seat 0 Spindle Air Valve Spring Rear Valve Seal Air Valve Kit 00 Fluid Needle 0 Needle Spring Spring Pad Housing & Seal Kit 0 8 Fluid Adjusting Knob 0 *9 Needle Spring Kit 0 0 Gunbody Air Inlet Colour ID Ring Kit ( Colours) 0 Air Inlet Kit 0 Needle Packing Packing Spring Packing Nut * Packing, Spring and Packing Nut Kit 0 *8 Trigger Screw 9 Trigger *0 Trigger Stud Trigger Stud & Screw Kit 0 Plug Cheater Valve (optional) 0 Air Valve Service Tool (only included in the Air Valve Kit ) service PARTs Spray Gun repair kit (inludes items marked *) 0 Seal and Pin Kit, kit of (items, and ) 99

5 TEKNA Guns and Accessories TEKNA QuickClean GRAvITy spray GuN Models Available! Cupped or Uncupped Includes: E high efficiency air cap HAV- air adjusting valve with digital gauge Extra needle/nozzle set Gun wrench and color ID rings DeKups Adapter (DPC-) Uncupped only QuickClean coating EPA Compliant. Approved in most HVLP areas. HAV- * EPA and SCAQMD Approved * Waterborne compatible when using a plastic or disposable cup system. 00, 00, The DeKups System is covered by U.S. Patent Nos.,80,8 and,,, owned by M Innovative Properties Co., and U.S. Patent Nos.,80,80;,,0;,,9;,0,8;,,00;,,89;,,;,08,9; owned by Inc. TEKNA QuickClean Basecoat/Clearcoat Gravity Feed Spray Guns Needle/Nozzle Cup 00.mm,.mm Uncupped E 00.mm,.mm 900cc Aluminum E 008.mm,.mm Uncupped E & mm,.mm 900cc Aluminum E TEKNA QuickClean s #E air cap (HE) #0 air cap (HVLP) #909 air cap (HVLP) Fluid Tips Base coats, clearcoats Order/Model No PSI inlet for HVLP approved areas Base coats (solvent) Order/Model PSI inlet Clearcoats, waterborne base coats Order/Model PSI inlet.mm,.mm,.mm,.mm,.mm (for hot climate waterborne) ½" " " Refer to Technical Bulletin: TB-00 OTHER salable PARTs / ACCEssORIEs Wrench (0 & mm) 00 #0 Test Cap (HVLP) 08 Air Adjusting Valve 0 #909 Test Cap (HVLP) 09 Replacement Description Part Qty Retaining Ring Slip Ring Retaining Clip Retaining Ring Seal Base/Clear Cap & Ring (E) 00 (High Efficiency) HVLP Cap & Ring (909) 0 HVLP Cap & Ring (0) 0 Application Recommended Inlet Pressure BAR/PsI Air Flow LPm/sCFm 00 Base coats, clear coats #E HE.. BAR / PSI LPM / 9 SCFM 0 Clear coats, waterborne base #909 HVLP..8 BAR / PSI 9 LPM / SCFM 0 Base coats #0 HVLP.. BAR / 8 PSI 8 LPM /.. SCFM Description Part Qty Retaining Ring & Seals 0 8 Fluid Nozzle. Fluid Nozzle & Fluid Needle Set 0. Fluid Nozzle & Fluid Needle Set 0. Fluid Nozzle & Fluid Needle Set 0. Fluid Nozzle & Fluid Needle Set 0. Fluid Nozzle & Fluid Needle Set 0 9 Air Separator *0 Air Separator Seal (kit of ) 0 Air Separator & Seal Kit 0 * Body Bushing Gasket Body Bushing Body Bushing & Gasket 08 Fluid Needle * Needle Spring * Needle Spring Pad 8 Fluid Adjusting Knob 9 Fluid Adjusting Knob, Spring,& Pad Kit 09 *0 Retaining Clip Spreader Valve Body * Spreader Valve Seal Spreader Valve Adjusting Knob * Spreader Valve Pin Spreader Valve Assembly 00 * Needle Packing * Packing Spring *8 Packing Nut 9 Packing, Spring & Packing Nut Kit 0 0 Air Valve Body Air Valve Cage Air Valve Poppet Air Valve Spring Air Valve Spring Pad Air Valve Seal Air Valve Assembly 0 * Trigger Stud Screw (T0 *) 8 Trigger *9 Trigger Stud 0 Trigger, Stud & Screw Kit 0 Plug Air Inlet 0 Colour ID Ring Kit ( Colours) 0 Gun Body * The TEKNA Spray Gun Repair Kit (0) contains all the parts indicated with an asterisk.

6 TEKNA Guns and Accessories TEKNA Copper HE GRAvITy spray GuN Models Available! Cupped or Uncupped Includes: E high efficiency air cap HAV- air adjusting valve with digital gauge Extra needle/nozzle set Gun wrench and color ID rings DeKups Adapter (DPC-) Uncupped only * TEKNA Copper HE Basecoat/Clearcoat Gravity Feed Spray Guns Needle/Nozzle Cup 088.mm,.mm Uncupped E 089.mm,.mm 900cc Aluminum E 09.mm,.mm Uncupped E 09.mm,.mm 900cc Aluminum E TEKNA Copper HE s #E Base coats, clearcoats air cap Order/Model No 00 (HE) 9 PSI inlet for HVLP approved areas ½" EPA Compliant. Approved in most HVLP areas. HAV- EPA and SCAQMD Approved * Waterborne compatible when using a plastic or disposable cup system. 089, , 09 The DeKups System is covered by U.S. Patent Nos.,80,8 and,,, owned by M Innovative Properties Co., and U.S. Patent Nos.,80,80;,,0;,,9;,0,8;,,00;,,89;,,;,08,9; owned by Inc. #0 Base coats (solvent) air cap Order/Model 0 (HVLP).. 8 PSI inlet #909 Clearcoats, waterborne air cap base coats (HVLP) Order/Model 0 PSI inlet Fluid Tips.mm,.mm,.mm,.mm,.mm (for hot climate waterborne) " " Refer to Technical Bulletin: TB-00 Chart : Fluid Nozzle & Fluid Needle Replacement Fluid Nozzle size I.D. (mm) Fluid Nozzle/ Needle set Chart : Replacement Application Recommended Inlet Pressure BAR/PsI Air Flow LPm/sCFm 0 Base coats #0 HVLP.. BAR/8 PSI 8 LPM.. SCFM 0 Clearcoats #909 HVLP..8 BAR/ PSI 9 LPM Waterborne Base SCFM 00 Base coats, clearcoats NOTE: When replacing the fluid nozzle or fluid needle, replace both at the same time. Lightly lubricate the threads of the fluid nozzle before reassembling. Torque nm (0 ft-lbs). Don t over tighten the fluid nozzle. Use 0 mm wrench supplied with gun. #E HE.. BAR/ PSI (HVLP approved areas)..0 BAR/ 0 PSI (non HVLP approved areas) LPM/9 SCFM (HVLP approved areas) 8 LPM SCFM (non HVLP approved areas) Description Part Qty Retaining Ring Slip Ring Retaining Clip Retaining Ring Seal Base Cap & Ring (0) 0 (see Chart ) Clear Cap & Ring (909) 0 (see Chart ) Retaining Ring 0 & Seals 8 Fluid Nozzle (see Chart ) 9 Air Separator *0 Air Separator Seal (kit 0 of ) Air Separator & Seal Kit 0 * Body Bushing Gasket Body Bushing Body Bushing & Gasket 08 Fluid Needle (see Chart ) * Needle Spring * Needle Spring Pad 8 Fluid Adjusting Knob 9 Fluid Adjusting Knob, 09 Spring, & Pad Kit *0 Retaining Clip Description Part Qty Spreader Valve Body * Spreader Valve Seal Spreader Valve Adjusting Knob * Spreader Valve Pin Spreader Valve Assembly 00 * Needle Packing * Packing Spring 8 Packing Nut 9 Packing, Spring & Packing 0 Nut Kit 0 Air Valve Body Air Valve Cage Air Valve Poppet Air Valve Spring Air Valve Spring Pad Air Valve Seal Air Valve Assembly 0 * Trigger Stud Screw (T0 *) 8 Trigger *9 Trigger Stud 0 Trigger, Stud & Screw Kit 0 Plug Air Inlet 0 Colour ID Ring Kit ( 0 Colours) Gun Body *9 Trigger Stud 0 Trigger, Stud & Screw Kit 0 Plug Air Inlet 0 Colour ID Ring Kit ( 0 Colours) Gun Body * The TEKNA Spray Gun Repair Kit (0) contains all the parts indicated with an asterisk. OTHER salable PARTs /ACCEssORIEs Wrench (0 & mm) 00 #0 Test Cap (HVLP) 08 #909 Test Cap (HVLP) 09 Spray Gun Repair Kit 0 TEKNA Replacement 900cc Aluminum Cup 0 Disposable Lid Kit () GFC-0-K Paint Filter Kit KGP--K

7 Gravity Guns HE/HvLP Gravity Gun/Cup 808 CVI-0G Includes:.mm &.mm fluid nozzles; 900cc aluminum gravity cup with push-on lid HE/HvLP Waterborne Gravity Gun/Cup 8099 CVI-0GW Includes:.mm &.mm fluid nozzles; 0 oz. Acetal gravity cup Two air caps included: Trans-Tech High Efficiency Technology (#0) HVLP (#0) Comfortable and lightweight; ergonomic design means reduced painter fatigue. CVi Gravity Feed s #0 air cap (HVLP) Base coats, clearcoats, primers, single stage, and low VOC 808 Model SP-00-0-K -8 PSI inlet 0- CFM ¼" Both models include: spray gun lube, fluid filter, gun hook, HAV- air adjusting valve with gauge, air valve assembly tool * #0 air cap (HE) Primers, base coats, clearcoats, single stage, and low VOC 80 Model SP-00-0-K 0- PSI inlet.-9 CFM ½" EPA and SCAQMD Approved Fluid Tips.0 mm,. mm,. mm,. mm,. mm,.8 mm,.0 mm (Included tip sizes shown in bold) * Waterborne compatible when using a plastic or disposable cup system. Refer to Service Bulletin: SB--8 Air Inlet Nipple ¼" NPS(M) (Torque to ft.lbs.) Use medium strength thread sealant (i.e. Loctite Blue or equal) on threads. model Description 808 SP-00-0-K /Retaining Ring assy (#0) 80 SP-00-0-K /Retaining Ring assy (#0) a 809 SP-00S-0-K Nozzle (.0) b 800 SP-00S--K Nozzle (.) c 808 SP-00S--K Nozzle (.) d 80 SP-00S--K Nozzle (.) e 80 SP-00S--K Nozzle (.) f 80 SP-00S-8-K Nozzle (.8) g 80 SP-00S-0-K Nozzle (.0) + 80 SP--K Separator + 80 GTI--K Packing 80 SP-0-K Spreader Valve Stud and Screw 808 SP--K Needle Adjusting Screw SP--K Spring 9a 80 SP-00S-0-K Needle (.0) 9b 808 SP-00S--K Needle (.) 9c 808 SP-00S--K Needle (.) 9d 809 SP-00S--K Needle (.) 9e 800 SP-00S--K Needle (.) 9f 80 SP-00S-8-K Needle (.8) 9g 80 SP-00S-0-K Needle (.0) 0 80 SP--K Air Valve Housing and Seal Spindle 0 SP--CR-K Trigger, Stud and Screw 80 SP--K Connector 80 SP-0-K Airflow Valve 80 SPK-0-K Air Valve Service Kit 80 SPK-0-K Retaining Ring and Seals GTI-8-K Clip, Seal and Pin Kit Air Valve Assembly Tool 80 SPN--K Spanner + Spray Gun Service Kit 8008 (SPK-0-K) Ref Description Qty. Separator Packing 8 Spring 8 Clip, Seal and Pin Kit

8 Gravity Guns GTi millennium HvLP GRAvITy FEED GuN/CuP 0 GTI-0G NEW! Anodized Finish HVLP Base Coat/Clearcoat Gun Unique air cap design produces painter-friendly pattern Excellent value Includes three different fluid tips Includes:. mm,. mm, and. mm fluid tips 900cc aluminum cup with push-on lid HAV- high output air adjusting valve with gauge Spray gun lube, fluid filter, gun hook GTi Millennium HVLP Gravity Feed Gun model Type 0 GTI-0G Fluid Tip (mm) HVLP. &.. Inlet Pressure 0- PSI -0 PSI 0- PSI -0 PSI (Includes. mm,. mm, &. mm fluid tips) Application Base coats High solids clearcoats, single stages Base coats Low solids clearcoats, single stages GTi Millennium Gravity Feed HVLP #000 air cap HVLP Base coats, clearcoats, primers, single stage, and low VOC 9 Model GTI PSI inlet.-.0 CFM " Fluid tips. mm,. mm,. mm,. mm,. mm,.8 mm,.0 mm,. mm (Included tip sizes shown in bold) Refer to Service Bulletin: SB--8 8 Fan Air Port Center Air Port 9 (GTI-0-000) Test Kit 0 Fluid Tip (Torque to -0 ft.lbs.) 9 DETAIL #8 -Piece Needle Packing Assembly 8 (See DETAIL #8) 9 Chart Fluid Tip Tip size I.D. model in. mm 9 GTI GTI GTI GTI GTI GTI GTI GTI Air Inlet Nipple ¼" NPS(M) (Torque to ft.lbs.) Use medium strength thread sealant (i.e. Loctite Blue or equal) on threads (KK-00) Cleaning Kit Consists of: brushes & wirepick. Helps keep air cap clean and performing properly. Gun Repair Kit 9 (KK-08-) Description Qty. Baffle Seal 8 Packing Gasket Kit Fluid Needle Spring Spring Pad 9 Air Valve Spring 0 Air Valve U Cup Seal Washer Snap Ring Fluid Cup Gasket Retaining Clip Seal Pin Setup Information by Paint Brand: Request DeVilbiss paint company recommendation chart or consult your paint supplier specifications for the material being sprayed. model Description 99 JGA--K0 Spring Clip (Kit of 0) 90 GTI- Retaining Ring 9 GTI (#000) and Retaining Ring See Chart See Chart Fluid Tip 99 GTI--K Baffle Seal (Kit of ) 98 GTI- Baffle Assembly JGA-0-K Packing (Kit of ) K0 Packing Nut GTI-0 Spreader Valve 90 GTI- Fluid Needle 90 JGS--K0 Gasket Kit (PTFE) (Kit of 0) Body Bushing Fluid Needle Spring Spring Pad 9089 MBD-9-K0 Spring and Pad (Kit of 0) 90 GTI- Needle Adjusting Screw 8 99 KK-09 Bushing, Spring, Pad and Knob Kit 9 Air Valve Spring 0 Air Valve Air Valve Body U Cup Seal Washer Snap Ring 9080 JGS-9- Air Valve Assembly 908 P-MB- Air Inlet Nipple /" NPS(M) Trigger Stud Screw 8 Trigger Stud JGS-8 Stud and Screw Kit 0 Trigger 99 JGS-- Trigger Stud, Screw Kit 9 KGP--K Cup Gasket (Kit of ) Blue Retaining Clip Seal Pin 99 GTI-8-K Clip, Seal & Pin Kit ( Each) 99 Gun Holder, Coated 8 90 KK-00 Cleaning Kit A quantity of necessary parts is included in 9 Repair Kit (KK-08-) for complete gun repair and should be kept on hand for service convenience. Suffixes: -K designates kit of multiple parts. Example: JGA-0-K is a kit of packings.

9 Gravity Guns PLus HIGH EFFICIENCy GRAvITy FEED GuN/CuP 0 GFG-0 Includes:. mm,. mm, and. mm fluid tips 900cc aluminum cup with push-on lid HAV- high output air adjusting valve with gauge Spray gun lube, fluid filter, gun hook NEW! Anodized Finish PLUS High Efficiency Gravity Feed Gun model Type 0 GFG-0 Fluid Tip (mm) HE. &.. Inlet Pressure PSI 0 0 PSI 0 0 PSI 0 0 PSI 0 0 PSI (Includes. mm,. mm, &. mm fluid tips) Application Base coats High solids clearcoats Single stages Low solids clearcoats Single stages PLUS Gravity Feed High Efficiency #0 air cap Primers, base coats, clearcoats, single stage and low VOC 9 Model AV PSI Inlet 9 CFM ½" EPA Compliant. Approved in most HVLP areas. Fluid tips.0 mm,. mm,. mm,. mm (Included tip sizes shown in bold) Refer to Service Bulletin: SB--9 0 Gun Repair Kit 9 (KK-08-) Description Qty. Baffle Seal 8 Packing Gasket Kit Fluid Needle Spring Spring Pad 9 Air Valve Spring 0 Air Valve U Cup Seal Washer Snap Ring Fluid Cup Gasket Retaining Clip Seal Pin Fluid Tip (Torque to -0 ft.lbs.) 9 8 (See DETAIL #8) 9 DETAIL #8 -Piece Needle Packing Assembly Chart 8 (Optional) Fluid Tip Tip size I.D. model in. mm 9 AV AV AV AV AV AV Setup Information by Paint Brand: Request DeVilbiss paint company recommendation chart or consult your paint supplier specifications for the material being sprayed. 8 0 Air Inlet Nipple ¼" NPS(M) (Torque to ft.lbs.) Use medium strength thread sealant (i.e. Loctite Blue or equal) on threads model Description #0 99 JGA--K0 Spring Clip (Kit of 0) 90 GTI- Retaining Ring 9 AV-0-0 #0 and Retaining Ring See Chart See Chart Fluid Tip 99 GTI--K Baffle Seal (Kit of ) 98 GTI- Baffle Assembly JGA-0-K Packing (Kit of ) K0 Packing Nut GTI-0 Spreader Valve 90 GTI- Fluid Needle 90 JGS--K0 Gasket Kit (PTFE) (Kit of 0) Body Bushing Fluid Needle Spring Spring Pad 9089 MBD-9-K0 Spring and Pad (Kit of 0) 90 GTI- Needle Adjusting Screw 8 99 KK-09 Bushing, Spring, Pad and Knob Kit 9 Air Valve Spring 0 Air Valve Air Valve Body U Cup Seal Washer Snap Ring 9080 JGS-9- Air Valve Assembly 908 P-MB- Air Inlet Nipple /" NPS(M) Trigger Stud Screw 8 Trigger Stud JGS-8 Stud and Screw Kit 0 Trigger 99 JGS-- Trigger Stud, Screw Kit 9 KGP--K Cup Gasket (Kit of ) Retaining Clip Seal Pin 99 GTI-8-K Clip, Seal & Pin Kit ( Each) 99 Gun Holder, Coated 8 98 GTI- Air Adjusting Valve (Optional) 9

10 Gravity Guns sripro spot REPAIR GuN 80 SRIPRO-G-0 Includes:.0 mm fluid tip TS high efficiency & HS HVLP air caps Starter set of 9-oz. disposable cups: lids and liners reusable sleeve and lid gun adapter measuring guide 00-micron barrel paint filter -micron disk filter oz. plastic cups Wrench and spray lube colored identification rings * * Waterborne compatible when using a plastic or disposable cup system. Small Gun BIG Performance Comfort and balance -finger trigger Excellent atomization of solvent and waterborne materials Versatile! ¼" to 9" fan pattern for everything from spot repairs to door jambs, bumpers, small panels, and motorcycle tanks Balanced air valve for smooth triggering and control during fading and blending Eliminates the " kick" normally felt when triggering traditional guns Self-adjusting, smooth action needle packing SRiPro Spot Repair Gun s HS air cap (HVLP) TS air cap (HE) Fluid tips Primers, base coats, clearcoats, single stage, and low VOC 809 Model SRIPRO-0-HS 9 PSI inlet.8 CFM Base coats, clearcoats, primers, single stage, and low VOC 809 Model SRIPRO-00-TS 9 PSI inlet. CFM 0.8 mm,.0 mm,. mm (Included tip size shown in bold) ¼ to 9" ¼ to 9" Refer to Service Bulletin: SB--8 Seal & Pin Kit 99 (GTI-8-K) Description Qty. 0 Retaining Clip Speader Valve Seal Valve pin Chart Fluid Nozzle Fluid Needle model model 8098* SRIPRO K 8099* SRIPRO-00-0-K 800 SRIPRO K 8000* SRIPRO-00--K 800 SRIPRO-00--K *Includes SRIPRO- separator NOTE: When replacing the fluid nozzle or fluid needle, replace both at the same time. Torque to in-lbs (9 0 Nm). Don t overtighten the fluid nozzle. Use SRI-0 mm wrench supplied with the gun and check with a torque wrench. ImPORTANT NOTE: The sripro and older sri fluid nozzles and aircaps ARE NOT INTERCHANGEABLE between the models. Any attempt to fit fluid nozzles or caps onto the wrong spray gun may cause damage to the parts or the spray gun body and invalidate the warranty. 0 Gun Repair Kit 0 Description Qty. Body Bushing Seal Needle Spring Pad 0 Retaining Clip Speader Valve Seal Valve pin Needle Packing Packing Spring Trigger Stud Screw 9 Trigger Stud Order model Description Retaining Ring Slip Ring SRI--K Retaining Ring Seal See chart above & Ring 8 See Chart Fluid Nozzle SRIPRO--K Separator Body Bushing Seal Body Bushing Body Bushing & Seal See Chart Fluid Needle Needle Spring Needle Spring Pad 8 Fluid Adjusting Knob PRO--K Fluid Adjusting Knob, Spring & Pad Kit 0 Retaining Clip Spreader Valve Body Spreader Valve Seal Spreader Valve Adjusting Knob Valve Pin 800 SRIPRO-0-K Spreader Valve Assembly Needle Packing Packing Spring 8 Packing Nut Packing, Spring & Packing Nut Kit 0 Air Valve Body Air Valve Cage Air Valve Poppet Air Valve Spring Air Valve Spring Pad 800 SN--K Air Valve Seal 0 0 Air Valve Assembly Trigger Stud Screw (T0 *) 8 Trigger 9 Trigger Stud SN--K Trigger, Stud & Screw Kit 8009 SN-0-K Air Inlet 0 0 Color ID Ring Kit ( colors) 800 PRO-0-K Airflow Valve Circlip Wrench (kit of ) Air Valve Service Tool (included in 0) Air Flow Valve Knob

11 PRi HvLP GRAvITy FEED PRImER GuN/CuP 808 PRI-G Includes: 900cc aluminum cup with push-on lid Spray gun lube Clear anodized finish The Start of a Great Finish Reduces sanding and overspray Sprays a wide variety of primers and other undercoats PRi HVLP Gravity Feed Primer Gun model Type 808 PRI-G Fluid Tip (mm) Inlet Pressure Gravity Guns Application HVLP.,.8-0 PSI Primer surfacers PRi Gravity Feed HVLP Primer #0 air cap (HVLP) Primers including low VOC 98 Model PRI PSI inlet " Fluid tips. mm,. mm,. mm,. mm,. mm,.8 mm,.0 mm,. mm (Included tip sizes shown in bold) Refer to Service Bulletin: SB--00 DETAIL #8 -Piece Needle Packing Assembly Gun Repair Kit 9 (KK-08-) * Fluid Tip (Torque to -0 ft.lbs.) 0 9 Description Qty. Baffle Seal 8 Packing Gasket Kit Fluid Needle Spring Spring Pad 9 Air Valve Spring 0 Air Valve U Cup Seal Washer Snap Ring Fluid Cup Gasket Retaining Clip Seal Pin 8 (See Detail #8) Chart Fluid Tip Tip size I.D. model in. mm 9 GTI GTI GTI GTI GTI GTI GTI GTI * Air Inlet Nipple ¼" NPS(M) (Torque to ft.-lbs.) * Use medium strength thread sealant (i.e. Loctite ) on threads. (optional) Order model l 9 (KK-08-) Gun Repair Kit includes a quantity of necessary parts. Description Primer 99 JGA--K0 Spring Clip (Kit of 0) 90 GTI- Retaining Ring 98 PRI-0-0 Primer and Retaining Ring See Chart Fluid Tip 99 GTI--K Baffle Seal (Kit of ) 98 GTI- Baffle Assembly JGA-0-K Packing (Kit of ) K0 Packing Nut GTI-0 Spreader Valve 90 GTI- Fluid Needle 90 JGS--K0 Gasket Kit (PTFE) (Kit of 0) Body Bushing Fluid Needle Spring Spring Pad 9089 MBD-9-K0 Spring and Pad (Kit of 0) 90 GTI- Needle Adjusting Screw 8 99 KK-09 Bushing, Spring, Pad and Knob Kit 9 Air Valve Spring 0 Air Valve Air Valve Body U Cup Seal Washer Snap Ring 9080 JGS-9- Air Valve Assembly 908 P-MB- Air Inlet Nipple/" NPS(M) Trigger Stud Screw 8 Trigger Stud JGS-8 Stud and Screw Kit 0 Trigger 99 JGS-- Trigger, Stud, Screw Kit 908 KGP--K Fluid Cup Gasket (Kit of ) Retaining Clip Seal Pin 99 GTI-8-K Clip, Seal & Pin Kit ( Each) 99 Gun Holder, Coated (Optional) Suffixes: -K, -K0 designate kits of multiple parts. Example: JGA-0-K is a kit of packings.

12 Gravity Guns m-g HvLP GRAvITy FEED GuN/CuP 900 Model Includes:. mm fluid tip 900cc aluminum cup with push-on lid Spray gun lube, fluid filter, gun hook * * Waterborne compatible when using a plastic or disposable cup system. Proven Performance Low air volume requirements Quality finishes with low to medium solids materials M-G HVLP Gravity Feed Gun model (9 x 9P) M-G Gravity Feed HVLP 9P air cap Type Fluid Tip (mm) Inlet Pressure Application HVLP. 8 PSI Base coats, clearcoats, single stages, waterbornes Base coats, clearcoats, single stage, waterbornes (when used with GFC-0 or DeKups) 900 Model PSI inlet 0" Fluid tips. mm (9),. mm (9),. mm (9),. mm (9) (Included tip sizes shown in bold) Refer to Part Sheet SBBI--8 Must be replaced whenever # is removed (See Chart ) (Optional) Chart 8 9 Air Inlet Nipple ¼" NPS(M) (Torque to ft.lbs.) Use medium strength thread sealant (i.e. Devcon # Blue, or equal) on threads. Fluid Nozzle Tip size I.D. in. mm (-900) (-900) (-900) (-900).00.8 Order model s Gun Repair Kit 9008 (--) Description Qty. Seal 9 Retaining Ring 0 O-Ring O-Ring Spring, Yellow Spindle Spring, Blue Seal Cartridge Torquing Information Description Qty. Fluid Nozzle 0 Ft. Lb. Head Insert 0 Ft. Lb. 8 Side Port Ft. Lb. Housing Ft. Lb 9 Air Connection Ft. Lb. Description Retaining Ring Air Nozzle See Chart Fluid Nozzle Head Insert s Head Insert Seal Ring (Kit of ) l Trigger Stud l Trigger Screw Side Port Control Assembly s 9 Retaining Ring 0 O-Ring sh O-Ring H Seal Retainer s Spring, Yellow s Spindle Assembly s Spring, Blue Housing ABSS Needle Material Valve Control Knob Air Connection Trigger s Seal Cartridge Assembly l Valve Spindle Cap s 9 KGP--K Cup Gasket (Kit of ) Wrench (Optional) Gun Holder, Coated l Screw, Stud & Cap Kit 9009 (-) Description Qty. Trigger Stud Trigger Screw Valve Spindle Cap H O-Ring & Retainer Kit 9009 (-) Description Qty. O-Ring Seal Retainer

13 Gravity Guns FLG FINIsHLINE GRAvITy FEED spray GuNs HvLP solvent-based value KIT 808 FLG-0 Includes:.mm,.mm &.8mm fluid tips, 900cc aluminum cup, air adjusting valve with gauge HvLP WATERBORNE value KIT 809 FLG- Includes:.mm,.mm &.8mm fluid tips, 0 0z. Acetal cup, air adjusting valve with gauge PRImER GuN value KIT Model 800 FLG-8 Includes:.8mm &.mm fluid tips, 900cc aluminum cup * * Waterborne compatible when using a plastic or disposable cup system. 808, Always the Price & Performance Leader Multiple fluid tips included in each model High grade stainless steel parts Easy to clean, blue anodized finish Proven reliability FinishLine Gravity Feed Guns Fluid tip model (mm) Cup Application Replaces 808 FLG FLG- 800 FLG-8 FinishLine Gravity Feed s # air cap (HVLP) Fluid Tips.,.,.8.,.,.8 HVLP # HVLP #.8,. HVLP # 900cc Aluminum 0 oz. Acetal 900cc Aluminum Top coats, light primers Primers, base coats, clearcoats, single stage and low VOC 9000 Model FLG-- PSI inlet. mm,. mm,.8 mm,. mm FLG- Waterborne top FLG--WB coats, light primers, primers Primers, liquid masking, chip guards, other specialty materials FLG-8 0½" Refer to Service Bulletin: SB-- FLUID TIP Torque to 0 ft-lbs Air Inlet Nipple /" NPS(m) Torque to ft-lbs Use medium strength thread sealant (i.e. Devcon # Blue or equivalent) on threads 8 Order model Description 900 FLG- Retaining Ring See s chart, above See Chart Fluid Tip & Seal Kit 9000 FLG-0-K Fluid Tip Seal (Kit of ) 900 FLG-0 Baffle 808 FLG- Spreader Air Adjustment Valve 80 FLG--K Needle Knob, Spring, Bushing & Gasket Kit 8 80 FLG--K FLG Needle, Needle Packing & Nut Kit JGS-9- Air Valve & Gasket Kit P-MB- Air Inlet Nipple 99 JGS-- Trigger, Trigger Stud & Screw 9 KGP--K Cup Gasket Kit (Kit of ) 0 0 Metal Gravity Feed Cup 90 GFC-0 Acetal Gravity Feed Cup 909 GFC-0-K Disposable Lid Kit (Kit of ) 908 KGP--K Filter Kit (Kit of ) 80 FLG-88-K FLG Gun Repair Kit (Contains each: Fluid Tip Seal, Needle Packing, Trigger Stud, Trigger Screw, and Gasket for Air Valve & Needle Bushing.) 90 FLG- # HVLP Test Cap Chart Cup Drawing 0 GFC-0 Fluid Tip ( ) Tip size Part in. mm Application 800 FLG--K.0. Stains, lacquers, basecoats, clears 800 FLG--K.09. General purpose, light to medium viscosity materials 800 FLG--8K.00.8 Primers, medium viscosity materials 800 FLG--K.08. Heavy materials Cup Filter () Cup Gasket () Gun Body

14 Gravity Guns HvLP Auto Painting Gun sets specifications Finish Coat & Primer Gun 0 PSI inlet pressure delivers 0 PSI air cap pressure at CFM air volume Detail Gun 0 PSI inlet pressure delivers 0 PSI air cap pressure at 8 CFM air volume All Guns Air inlet: ¼" NPS The DeKups System is covered by U.S. Patent Nos.,80,8 and,,, owned by M Innovative Properties Co., and U.S. Patent Nos.,80,80;,,0;,,9;,0,8;,,00;,,89;,,;,08,9; owned by Inc. StartingLine HVLP Auto Painting Gun Kits Kit 80 -Gun Painting & Touch Up 80 -Gun Painting & Priming Gun Painting 808 -Gun Primer Pack Guns Included Finish Coat Detail Finish Coat Primer Finish Coat Primer Detail Fluid Tip Cup(s) Included Accessories Included Primer ()..8 One 00 cc (0 oz.) One 0 cc (8. oz.) Two 00 cc (0 oz.) Two 00 cc (0 oz.) One 0 cc ( oz.) Three oz. plastic, four -oz. liners & lids, one, frame/lid, two plugs 800 Detail Gun only.0 One 0 cc (8. oz.) None Cleaning brushes, wrench, air adjusting valve with gauge Cleaning brushes, wrench, air adjusting valve with gauge Cleaning brushes, wrench, air adjusting valve with gauge Extra. tip & needle, () DPC-8 adapters, wrench, filter, funnel Detail gun also sold separately HVLP Finish Coat Spray Gun HVLP Primer Spray Gun HVLP Detail Spray Gun -Gun Primer r Pack Refer to Service Bulletins: SB--, SB--0 and SI G 8 9-G Air Inlet Nipple ¼" NPS(M) Accessory Items cc Aluminum Cup and Lid (for full size gun) 80 0 cc Aluminum Cup and Lid (for touch up gun) StartingLine Full Size Tip & Needle Combos 800 StartingLine Tip & Needle (. mm) 800 StartingLine Tip & Needle (. mm) 8008 StartingLine Tip & Needle (.8 mm) Part Description W/Ring Fluid Nozzle l Nut l Gasket Gun Body Hook Fan Control l- C-Clip l- O-Ring l8 Gasket l9 O-Ring 0 Housing Paint Needle l Spring Knob, Fluid Control l Gasket l Screw l+ Valve Stem Complete l8 Spring l9 O-Ring 0 Air Valve Nut l E-Ring Washer Trigger l Trigger Stud Air Control Air Inlet Fitting KGP--K Filter s8 Gasket for Fitting cc Aluminum Cup & Lid 80 0cc Aluminum Cup & Lid 9-90 Lid for 00cc Cup s9-g Gasket for Lid l0-g Gasket for l Gun Repair Kit Full Size (80) Touchup (80) s Cup Gasket Kit Full Size (80) Touchup (808)

15 Gravity Cups Cups to Fit DeVilbiss, Binks FinishLine and TEKNA Gravity Spray Guns Gravity Feed Cups Gravity Cups Order model Cup size Application 90 GFC-0 0 oz. Acetal All full size current DeVilbiss, TEKNA, Binks and FinishLine gravity guns oz. Aluminum DeVilbiss SRi, SRiW, SRiPro, and Binks Cub gravity guns oz. Aluminum DeVilbiss SRi, SRiW, SRiPro, and Binks Cub gravity guns 99 SRI-8-K oz. Nylon DeVilbiss SRi, SRiW, SRiPro, and Binks Cub gravity guns cc Aluminum All full-size current DeVilbiss, TEKNA, Binks and FinishLine gravity guns DPC-0-K -8 GFC SRI-8-K E-Z Liners Most Economical Disposable Paint Cup System Available Saves time with easy clean up and less mess Saves money by greatly reducing solvent use for clean up OMX-0-K0 E-Z Liners model Description 909 OMX-0-K8 E-Z Liner Kit (8 liners & bushings) 9 OMX-0-K0 E-Z Liner Kit (0 liners & bushings) (order qty. )

16 Gravity Cups Gravity Cups & Assembly Refer to Service Bulletins: SB-- (GFC-0), TB-00 (0) Refer to Part Sheets: -9 (8-8) and -9 (-8) 0 (0) TEKNA Gravity Feed Cup/Aluminum 9008 (-8) oz. Aluminum Cup 90 (GFC-0) Gravity Feed Cup/Acetal model Description 0 Metal Gravity Feed Cup (900cc) GFC-0-K Disposable Lid Kit (Kit of ) KGP--K Filter Kit (Kit of ) model Description Gravity Feed Cup Assembly ( oz.) oz. Cup Lid Assembly (Kit of ) or A model Description 90 Cup Assembly, 0 oz. Acetal GFC-0 90 Cup Lid Assembly GFC Filter (Kit of ) KGP--K 90 Cup Gasket (White) KGP--K (Kit of ) For GFG/GFHV la 9 KGP--K Cup Gasket (Blue) (Kit of ) For GFG/GFHV guns (White) l For GTI, FLG, M-G, PRI and GFG Plus (Blue) 900 (8-8) 8 oz. Aluminum Cup 99 (sri-8-k) oz. Disposable Nylon Cup & Lid Kit 800 (DPC-0-K) oz. Plastic Cups and Lids Kit of Contains Cups and Lids ( ea. Red, Yellow & Green) Lid Cup model Description Gravity Feed Cup Assembly (8 oz.) Cup Cover Kit (Kit of ) Optional Filter (not included) DPC Adapter (not included)

17 JGA CONvENTIONAL suction FEED GuN/CuP 0 JGA- 00 JGA- Includes: TGC -qt. cup Proven Technology and Durability DeVilbiss JGA Suction Feed Guns model Type 0 JGA- 00 JGA- CNV. = CoNVeNtioNal Fluid Tip (mm) Inlet Pressure Application Suction Guns CNV.. -0 PSI Base, clear, low VOC, single stages, Urethanes CNV..8 - PSI Synthetic and acrylic enamels. May need to restrict fluid flow with needle adjustment for base and clearcoats. JGA Conventional Suction Feed s #9000 air cap Base coats, clearcoats, single stages Model AV PSI inlet 9- CFM Fluid tips. mm,.8 mm 0" #80 air cap Synthetic and acrylic enamels 900 Model MB PSI inlet 0- CFM Fluid tips.8 mm " Refer to Technical Bulletin: SB--9 OR CHART s, Fluid Tips, Fluid Needles & Applications on * Use medium strength thread sealant (i.e. Devcon # Blue, or equal) on threads. Fluid Inlet Nipple /8" NPS(M) (Torque to 0 ft. lbs.) With Ring ( ) MB Type of Fluid Delivery Fluid Needle ( ) Suction 90 GTI Suction or AV Pressure CHART Fluid Tips DETAIL #8 -Piece Needle Packing Assembly 0 Fluid Tip (Torque to -0 ft. lbs.) (See DETAIL) 90 GTI- Fluid Tip Tip size I.D. Type of Fluid model (in.) (mm) Delivery 9 AV--.0. Suction Feed 9 AV Suction Feed 9 * Fluid Tips used ( ) AV-- or AV--8 AV-- or AV--8 * (Optional) 8 Air Inlet Nipple /" NPS(M) (Torque to ft. lbs.) Repair Kit 9 (KK-08-) Description Qty. Baffle Seal 8 Packing Gasket (PTFE) Fluid Needle Spring Spring Pad 9 Air Valve Spring 0 Air Valve U Cup Seal Washer Snap Ring Fluid Inlet Gasket Retaining Clip Seal Order model Description 99 JGA--K0 Spring Clip (Kit of 0) 90 GTI- Retaining Ring See Chart & Retaining Ring See Charts & Fluid Tip 98 GTI- Baffle Assembly 99 GTI--K Baffle Seal (Kit of ) JGA-0-K Packing (Kit of ) K0 Packing Nut (Kit of 0) 0 90 GTI-0 Spreader Valve Assembly See Chart Fluid Needle 90 JGS--K0 Gasket (PTFE) (Kit of 0) Body Bushing Fluid Needle Spring Spring Pad 9089 MBD-9-K0 Spring & Pad (Kit of 0) 90 GTI- Needle Adjusting Screw 8 99 KK-09 Bushing, Spring, Pad & Knob Kit 9 Air Valve Spring 0 Air Valve Air Valve Body U Cup Seal Washer Snap Ring 9080 JGS-9- Air Valve Assembly 908 P-MB- Air Inlet Nipple /" NPS(M) Trigger Stud Screw 8 Trigger Stud JGS-8 Stud & Screw Kit (includes Studs & Screws) 0 Trigger 99 JGS-- Trigger, Stud & Screw Kit Fluid Inlet Gasket (PTFE) Locknut Fluid Inlet Adapter JGA-0 Fluid Inlet, Gasket & Nut Kit Retaining Clip Seal 8 Pin 9 99 GTI-8-K Clip, Seal & Pin Kit ( Each) JGA- Plug 98 GTI- Air Adjusting Valve (Optional) 8 Pin A quantity of necessary parts is included in 9 Repair Kit (KK-08-) for complete gun repair and should be kept on hand for service convenience. Suffixes: -K designates kit of multiple parts. Example: JGA-0-K is a kit of packings.

18 Suction Guns EGA CONvENTIONAL suction/pressure FEED TOuCH-uP GuN EGA Suction/Pressure Feed Touch-Up Gun model 0 EGA-0-90F Type Fluid Tip (mm) Inlet Pressure Application CNV..0 0 PSI All automotive refinishing materials CNV. = CoNVeNtioNal 0 EGA-0-90F EGA Conventional Suction or Pressure Feed Touch-up #90 air cap General Purpose 9008 Model EGA PSI inlet CFM " Fluid Tips.0 mm Refer to Service Bulletin: SB-- Fluid Inlet / NPS(M) Air Inlet / NPS(M) * Repair Kit 908 (KK-0) Description Qty. Fluid Needle Packing Gasket Trigger Bearing Stud 8 Air Valve Plunger 0 O-Ring Washer Spring Needle Spring 9 Stem 0 Ball Spring 9 model Description 9008 EGA- Packing Nut * Needle Packing EGA- Baffle (air distributor) 99 EGA-000-F Tip, Needle & Gasket (lapped) (includes #) 909 EGA-9-K Gasket (Kit of ) (Polyethylene) 9008 EGA- Trigger & Stud Assembly * Trigger Bearing Stud *8 Air Valve Plunger EGA- Fan Adjustment Assembly Horn *0 O-Ring * Washer * Spring 9008 EGA- Packing Gland Fluid Needle (included in Item ) * Needle Spring 900 AG- Needle Adj. Screw 9008 EGA- Air Valve Assembly 8 Lock Nut *9 Stem *0 Ball * Spring (Kit of ) Spring Retainer Gun Body Assembly 9008 EGA-0-90 For EGA Detail Pro 9009 EGA- Retaining Ring For EGA Detail Pro A quantity of necessary parts is included in 908 Repair Kit (KK-0) for complete gun repair and should be kept on hand for service convenience. Suffixes: -K designates kit of multiple parts. Example: JGA-0-K is a kit of packings. Fluid Tip, Needle & Gasket Kit 99 (EGA-000-F) 8 Ref Tip size I.D. Description in. mm Qty Fluid Tip (F).09.0 Gasket Fluid Needle (F)

19 PLus HIGH EFFICIENCy suction FEED GuN/CuP 0 JGA-0 PLUS Suction Gun Includes:. mm &.8 mm fluid tips TGC -qt. cup High output air adjusting valve with gauge Spray gun lube GTi millenium HvLP suction FEED GuN/CuP 0 GTI-0S GTi Suction Gun Includes:.0 mm &. mm fluid tips TGC -qt. cup High output air adjusting valve with gauge Spray gun lube NEW! Anodized Finish NEW! Anodized Finish PLUS High Efficiency Suction Feed Gun model Type 0 JGA-0 CNV. = CoNVeNtioNal PLUS Suction Feed High Efficiency #0 Primers, base coats, clearcoats, single stage, air cap and low VOC 9 Model AV PSI 9- CFM Fluid Tips GTi Millennium Suction Feed HVLP #000 air cap (HVLP) Fluid Tips Fluid Tip (mm) HE..8 Inlet Pressure 0-0 PSI - PSI - PSI 0-0 PSI Application Base coats High and low solids clearcoats Single stages Synthetic and acrylic enamels.0 mm,. mm,. mm,. mm,. mm,.8 mm (Included tip sizes shown in bold) GTi Millennium HVLP Suction Feed Gun model Type 0 GTI-0S CNV. = CoNVeNtioNal Fluid Tip (mm) HVLP.0. Inlet Pressure 0- PSI -0 PSI Base coats, clearcoats, primers, single stage, and low VOC 9 Model GTI PSI (air cap) PSI inlet Suction Guns.0 mm,. mm,. mm,. mm,.mm,. mm,.8 mm,.0 mm,. mm (Included tip sizes shown in bold) " Application Base coats Low and high solids, clearcoats and single stages " Refer to Service Bulletins: SB-- (JGA-0), SB-- (GTI-0S) Chart GTI-0S Fluid Tips Fluid Tip Tip size I.D. in. mm GTI GTI GTI Fluid Tip (Torque to -0 ft.-lbs.) Fluid Inlet Nipple /8" NPS(M) (torque to 0- ft.-lbs.) 0 0 Air Inlet Nipple /" NPS(M) (torque to ft.-lbs.) Chart JGA-0 Fluid Tips Fluid Tip Tip size I.D. in. mm AV--.0. AV--.0. AV Use medium strength thread sealant (i.e. Devcon # Blue, or equal) on threads Description Part Spring Clip JGA--K0 (Kit of 0) Retaining GTI- Ring #00 & GTI-0-00 Retaining Ring (GTI-0S) #000 & GTI Retaining Ring (GTI-0S) #0 & AV-0-0 Retaining Ring (JGA-0) Fluid Tip See Charts & Baffle Assembly GTI- Baffle Seal (Kit of ) GTI--K 8 Packing (Kit of ) JGA-0-K 9 Packing Nut --K0 (Kit of 0) 0 Spreader Valve GTI-0 Gasket Fluid Needle for GTI- GTI-0S Fluid Needle GTI- for JGA-0 Gasket Kit (PTFE) JGS--K0 (Kit of 0) Body Bushing Fluid Needle Spring Spring Pad Spring and Pad MBD-9-K Needle Adjusting Screw (Kit of 0) GTI- 8 Bushing, Spring, Pad KK-09 and Knob Kit 9 Air Valve Spring 0 Air Valve Air Valve Body U-Cup Seal Washer Snap Ring Air Valve Assembly JGS-9- Air Inlet Nipple P-MB- /" NPS(M) Trigger Stud Screw 8 Pin 9 Clip, Seal & Pin Kit GTI-8-K ( each) 0 Plug for JGA-0 ONLY A quantity of necessary parts is included in Repair Kit KK-08- for complete gun repair and should be kept on hand for service convenience. Suffixes: -K designates kit of multiple parts. Example: JGA-0-K is a kit of packings. l Repair Kit KK-08- Description Qty. Baffle Seal (Kit of ) 8 Packing (Kit of ) Gasket Kit (PTFE) (Kit of 0) Fluid Needle Spring Spring Pad 9 Air Valve Spring 0 Air Valve U-Cup Seal Washer Snap Ring Fluid Inlet Gasket (PTFE) Retaining Clip Seal 8 Pin Description Part 8 Trigger Stud 9 Stud and Screw Kit JGS-8 0 Trigger Trigger Stud, Screw JGS-- Kit Fluid Inlet Gasket (PTFE) Locknut Fluid Inlet Adapter Fluid Inlet, Gasket, Nut Kit JGA-0 Retaining Clip Seal 9

20 Suction Cups suction Feed Cups DeVilbiss JGA Suction Feed Cups model Cup size 00 TGC- 008 TGS-0 qt. Aluminum 8 oz. Polyethylene Application All full size current Binks, DeVilbiss and FinishLine suction guns DeVilbiss EGA & EGHV Suction touch-up guns Patented Drip Free Design One Quart Plus Capacity ( oz.) Durable Detail Suction Cup TGS-0 TGC- Refer to Service Bulletins: SB--9 (TGC-) and SB--090 (TGS-0) 008 (TGs-0) 00 (TGC-) Apply Loctite # to first two threads. / NPS (F) Keep Vent Hole open. TGS-0 Suction Cup model 000 AD-0 90 TGS--K Description Adapter Accessory /" NPS(M) x /8" NPS(F) Gasket (Kit of ) Fluid Tube " + 00 Cup and Cover TGS-0 Assembly (Polyethylene) Cup Lid Suction Cup Assembly (Quart) + One C- () cup lid is included. TGC- Suction Cup model Description Adapter, /" NPS (M) l Nut, /8" NPS (F) l Cam l 909 Drip Free Valve & TGC-0--K Gasket (Kit of ) l 909 TGC-9-K *Tri Seal Lid Gasket (Kit of ) Suction Cup Assembly (Quart) l 909 (KK-00) Repair Kit includes items. Repair kit contains enough parts to repair one complete assembly (see parts list below). Suffixes: Suffix -K designates a kit of multiple parts. Example: TGC-0--K is a kit of drip free valves. * Registered Trademark of Tri-Seal International Repair Kit 909 (KK-00) Do not fill above 0 ml line. Description Qty. Adapter, /" NPS (M) Nut, /8" NPS (F) Cam Drip Free Valve & Gasket *Tri-Seal Lid Gasket 0

21 Pressure Guns Cvi PREssuRE FEED GuN 809 CVI Two air caps and fluid tip sets included Comfortable and lightweight, ergonomic design reduces fatigue Sprays a broad range of materials Includes: Spray gun lube Air valve assembly tool * Waterborne compatible when using a plastic or disposable cup system. * CVi Pressure Feed Gun CVi Pressure Feed s #0 air cap (HE) #0 air cap (HVLP) Fluid Tip (mm) Inlet Pressure Application Fluid Flow 809 / CVI #0 air cap (HE).0,. 0 PSI Medium to high solids 0 oz./min. #0 air cap (HVLP).0,. 8 PSI Base coats, low to medium solids Primers, base coats, clearcoats, single stage, and low VOC 80 Model SP-00-0-K 0-9 PSI inlet.-9 CFM Base coats, clearcoats, primers, single stage, and low VOC 808 Model SP-00-0-K -8 PSI inlet 0- CFM Fluid Tips.0 mm,. mm,. mm,. mm (Included tip sizes shown in bold) 8 oz./min. ¼" ½" Refer to Service Bulletin: SB-- Order Part Description Qty. Part Options SP-00-***-K /Retaining Ring COM-0 or COM- 0, 0 e.g. *** = 0 SP-00S-**-K Nozzle 0,,,, 8, 0 e.g. ** = =. mm = 80 SP--K Separator = 80 GTI--K Packing 80 SP-0-K Spreader Valve Stud and Screw 808 SP--K Needle Adjusting Screw =8 800 SP--K Spring 9 SP-00S-**-K Needle 0,,,, 8, 0 e.g. ** = =. mm 0 80 SP--K Air Valve Housing & Seal Spindle 0 SP--CR-K Trigger, Stud & Screw 80 SP--K Connector 80 SP-0-K Airflow Valve 800 SP--K Fluid Inlet Connector and Seal 80 SPK-0-K Air Valve Service Kit 80 SPK-0-K Retaining Ring and Seals =8 99 GTI-8-K Clip, Seal and Pin Kit 0 Air Valve Assembly Tool 80 SPN--K Spanner 8008 SPK-0-K Spraygun Service Kit (parts included marked = )

22 Pressure Guns GTi millennium HvLP PREssuRE FEED GuN 09 GTI-0P- 0 GTI-P- HVLP Technology with Large Spray Smooth material and air flow Easy to clean Produce a high gloss finish and minimize orange peel Excellent fluid control for applying more film build with fewer passes NEW! Anodized Finish GTi Millennium Pressure Feed Guns model 09 GTI-0P- 0 GTI-P- GTi Millennium Pressure Feed HVLP s #000 air cap (HVLP) #MP air cap (HVLP) Fluid Tip (mm) Type HVLP. Primers, base coats, clearcoats, and low VOC 9 Model GTI PSI inlet..0 CFM Primers, base coats, clearcoats, single stages and low VOC 98 Model GTI-0-MP 0 PSI inlet. CFM Fluid tips. mm,. mm Inlet Pressure Application Fluid Flow oz./min. 0 PSI Low to medium solids HVLP. 0 PSI High solids oz./min. HVLP. 0 PSI High solids 9 oz./min. " " Refer to Service Bulletin: SB--99 Chart : and Baffle Combinations stamped on set CFm@ Cap Pressure 8 0 Part Baffle Baffle Assy. PsI PsI PsI PsI PsI 000 (Not Stamped) GTI GTI MP GTI-0-MP *JGPV NOTE: Baffle Seal NOT used with GTI-P gun (MP air cap). 0 Fluid Tip (Torque to -0 ft.lbs.) (See Detail #8) Fluid Inlet Nipple, /8" NPS(M) (Torque to 0- ft. lbs.) Chart : Fluid Tip and Needle If this no. is on needle, order * Order matched Fluid Tip and Needle Assembly Air Inlet Nipple ¼ NPS(M) (Torque to ft. lbs.) Use medium strength thread sealant (i.e. Devcon # Blue, or equal) on threads. If this no. is on tip, Tip size I.D. order in. mm JGA-0-FF AV-0-FF JGA-0-FF.0. JGA-0-FX AV-0-FX JGA-0-FX l 9 (KK-08-) Gun Repair Kit includes a quantity of necessary parts. + Use medium strength thread sealant (i.e. Devcon # Blue or equal) on threads. Suffixes: -K designates kit of multiple parts. Example: JGA- 0-K is a kit of packings. model Description 99 JGA--K0 Spring Clip (Kit of 0) 90 GTI- Retaining Ring See Chart and Retaining Ring See Chart Fluid Tip l 99 GTI--K Baffle Seal (Kit of ) See Chart Baffle Assembly l8 909 JGA-0-K Packing (Kit of ) K0 Packing Nut 0 90 GTI-0 Spreader Valve See Chart Fluid Needle l 90 JGS--K0 Gasket Kit (PTFE) (Kit of 0) Body Bushing l Fluid Needle Spring l Spring Pad 9089 MBD-9-K0 Spring and Pad (Kit of 0) 90 GTI- Needle Adjusting Screw 8 99 KK-09 Bushing, Spring, Pad & Knob Kit l9 Air Valve Spring l0 Air Valve Air Valve Body l U Cup Seal l Washer l Snap Ring 9080 JGS-9- Air Valve Assembly P-MB- Air Inlet Nipple /" NPS(M) Trigger Stud Screw 8 Trigger Stud JGS-8 Stud and Screw Kit 0 Trigger 99 JGS-- Trigger Stud, Screw Kit l Fluid Inlet Gasket (PTFE) Locknut + Fluid Inlet Adapter JGA-0 Fluid Inlet, Gasket, Nut Kit l Retaining Clip l Seal l8 Pin 9 99 GTI-8-K Clip, Seal & Pin (Kit of Each)

23 Pressure Guns PLus HIGH EFFICIENCy PREssuRE FEED GuN 0 JGA PLUS-P- High Efficiency Superior Atomization Handles Difficult Materials and Delivers Superior Finishes NEW! Anodized Finish PLUS High Efficiency Pressure Feed Guns model 0 JGA-0-0 Air Cap #0 (HE) Fluid Tip (mm) Inlet Pressure Application Fluid Flow PSI - PSI Medium solids Enamels and primers -0 oz./min. 0 #. 0- PSI High solids - oz./min. PLUS-P- (HE) PLUS Pressure Feed High Efficiency s #0 air cap (HE) # air cap (HE) Primers, base coats, clearcoats, single stage, and low VOC 9 Model AV PSI 9- CFM Fluid tip.0 mm High solids 9 Model AV-0-0- PSI inlet 9- CFM Fluid tip. mm ½" " Fluid Tips.0 mm,. mm,. mm,. mm Refer to Service Bulletin: SB-- DETAIL #8 -Piece Needle Packing Assembly l Repair Kit 9 (KK-08-) Description Qty. Baffle Seal 8 Packing Gasket Kit Fluid Needle Spring Spring Pad 9 Air Valve Spring 0 Air Valve U Cup Seal Washer Snap Ring Fluid Cup Gasket Retaining Clip Seal 8 Pin Chart : on Fluid Tip (Torque to -0 ft. lbs.) 8 (See Detail) * (Optional) Fluid Inlet Nipple /8" NPS(M) (Torque to 0- ft. lbs.) 0 model 0 9 AV AV-0- * Air Inlet Nipple ¼" NPS(M) (Torque to ft. lbs.) *Use medium strength thread sealant (i.e. Devcon # Blue, or equal) on threads Chart : Fluid Tips and Needles Tip size in. mm Fluid Tip ( ) suction Feed Fluid Needle ( ) Setup Information by Paint Brand: Request DeVilbiss paint company recommendation chart or consult your paint supplier specifications for the material being sprayed. Pressure Feed Fluid Needle ( ) AV--0 NR GTI AV-- NR GTI AV-- GTI- GTI AV-- GTI- NR AV--8 GTI- NR NR = Not Recommended model Description 99 JGA--K0 Spring Clip (Kit of 0) 90 GTI- Retaining Ring #0 and Retaining Ring See Chart Fluid Tip l 99 GTI--K Baffle Seal (Kit of ) 98 GTI- Baffle Assembly l8 909 JGA-0-K Packing (Kit of ) K0 Packing Nut 0 90 GTI-0 Spreader Valve See Chart Fluid Needle l 90 JGS--K0 Gasket Kit (PTFE) (Kit of 0) Body Bushing l Fluid Needle Spring l Spring Pad 9089 MBD-9-K0 Spring and Pad (Kit of 0) 90 GTI- Needle Adjusting Screw 8 99 KK-09 Bushing, Spring, Pad and Knob Kit l9 Air Valve Spring l0 Air Valve Air Valve Body l U Cup Seal l Washer l Snap Ring 9080 JGS-9- Air Valve Assembly 908 P-MB- Air Inlet Nipple /" NPS(M) Trigger Stud Screw 8 Trigger Stud JGS-8 Stud and Screw Kit 0 Trigger 99 JGS-- Trigger Stud, Screw Kit l Fluid Inlet Gasket (PTFE) Locknut Fluid Inlet Adapter JGA-0 Fluid Inlet, Gasket, Nut Kit l Retaining Clip l Seal l8 Pin 9 99 GTI-8-K Clip, Seal & Pin (Kit of Each) JGA- Plug 98 GTI- Air Adjusting Valve (Optional)

24 Pressure Guns JGA CONvENTIONAL PREssuRE FEED GuN 0 JGA JGA-0-- High Production, High Performance Worldwide choice for large area refinishing JGA Conventional Pressure Feed Guns model 0 JGA JGA-0-- CNV. = Conventional Type CNV.. CNV.. Fluid Tip Inlet (mm) Pressure Application Fluid Flow 0- PSI High solids fleet materials 0-80 PSI High solids fleet materials oz./min. 9 oz./min. JGA Conventional Pressure Feed # air cap # air cap High solids 90 Model AV-0-0- PSI inlet 9- CFM Fluid tip. mm High solids 90 Model AV PSI inlet - CFM Fluid tip. mm " " Refer to Service Bulletin: SB--9 DETAIL #8 -Piece Needle Packing Assembly Fluid Inlet Nipple /8" NPS(M) * Use medium (Torque to strength thread 0- ft. lbs.) sealant (i.e. Devcon # Blue, or equal) on threads. Chart If this no. is on air cap, order with Ring ( ) 90 AV-0-90 AV-0- Fluid Tip (Torque to -0 ft. lbs.) 0 9 * Fluid Needle ( ) 9 GTI-9-9 GTI-9-8 (See DETAIL) 9 Fluid Tips used ( ) 98 AV-- 90 AV * Air Inlet Nipple /" NPS(M) (Torque to ft. lbs.) (Optional) l Repair Kit 9 (KK-08-) Description Qty. Baffle Seal 8 Packing Gasket (PTFE) Fluid Needle Spring Spring Pad 9 Air Valve Spring 0 Air Valve U Cup Seal Washer Snap Ring Fluid Inlet Gasket Retaining Clip Seal 8 Pin l A quantity of necessary parts is included in 9 Repair Kit (KK-08-) for complete gun repair and should be kept on hand for service convenience. Suffixes: -K designates kit of multiple parts. Example: JGA-0-K is a kit of packings. Order model Description 99 JGA--K0 Spring Clip (Kit of 0) 90 GTI- Retaining Ring See Chart & Retaining Ring See Chart Fluid Tip 98 GTI- Baffle Assembly l 99 GTI--K Baffle Seal (Kit of ) l8 909 JGA-0-K Packing (Kit of ) K0 Packing Nut (Kit of 0) 0 90 GTI-0 Spreader Valve Assy See Chart Fluid Needle l 90 JGS--K0 Gasket (PTFE) (Kit of 0) Body Bushing l Fluid Needle Spring l Spring Pad 9089 MBD-9-K0 Spring & Pad (Kit of 0) 90 GTI- Needle Adjusting Screw 8 99 KK-09 Bushing, Spring, Pad & Knob Kit l9 Air Valve Spring l0 Air Valve Air Valve Body l U Cup Seal l Washer l Snap Ring 9080 JGS-9- Air Valve Assembly 908 P-MB- Air Inlet Nipple /" NPS(M) Trigger Stud Screw 8 Trigger Stud JGS-8 Stud & Screw Kit ( Studs & Screws) 0 Trigger 99 JGS-- Trigger, Stud & Screw Kit l Fluid Inlet Gasket (PTFE) Locknut Fluid Inlet Adapter JGA-0 Fluid Inlet, Gasket & Nut Kit l Retaining Clip l Seal l8 Pin 9 99 GTI-8-K Clip, Seal & Pin Kit ( Each) JGA- Plug 98 GTI- Air Adjusting Valve (Optional)

25 Airbrushes and Accessories DAGR GRAvITy AIRBRusH (.mm) 8009 DGR-0G- DAGR studio GRAvITy AIRBRusH, CuPs AND HOsE 80 DGR-0 AirBlade Compressor with Regulator (⅛ hp) 808 DGR-8- DAGR Airbrush & Compressor Kit (⅛ hp) 808 DGR-0G- DGR-0G- DAGR Studio DGR-0 Everything the Automotive Artist needs to get started! DAGR airbrush with ⅓ oz. cup ½ fl. oz. (cc) cup and lid ideal for spraying larger areas without refilling 0 ft. braided nylon air hose DAGR Airbrush model Description 8009 DGR-0G- DAGR Gravity Airbrush 80 DGR-0 DAGR Studio (Gravity Airbrush, ½-oz. Cups & 0-ft. Braided Hose) Performance and Versatility for the Automotive Artist Excellent Control Hairline detail to high paintflow shading Smooth double action trigger Pre-set handle for precise control of paint flow Versatile Sprays automotive paints to waterbased inks Removable ⅓ oz. gravity cup, with optional ¼ oz. cups Durable Solvent proof fluid passages, PTFE needle packing Copper, nickel and chrome plated body High Quality Precision made in U.S.A. Value Crown cap standard for fine lines and needle protection Collector storage tin included available, or spray with no cup Comfortable Light weight and balanced Choice of trigger buttons AirBlade Compressors model Description 808 DGR-8- AirBlade Compressor w/regulator ( 8 hp).0 CFM, up to 0 PSI, 0V 808 Gravity DAGR, AirBlade Compressor w/regulator DGR-0G- ( 8 hp), Hose 808 Regulator w/filter, Moisture Trap, Hanger DGR-0 AirBlade Compressors Include: Regulator Water trap filter Airbrush holder 808 / DGR / DGR-0G- Refer to Service Bulletin: SB--0 Specifications l DAGR Repair Kit 80 (DGR-K) Operating Pressures Maximum Inlet Pressure Airbrush Plating Needle Packing 0 to 0 psi psi Nickel, copper, chrome PTFE (solvent-proof) Description Qty. O-ring (head cap & handle) 9 Air valve washer Needle spring O-ring (pre-set needle knob) Air Inlet ⅛" BPT model Description 80 DGR-0 Crown cap 80 DGR-0- Air cap (for.mm nozzle) 80 DGR-0 Head cap 808 DGR-0- Nozzle (.mm) l 809 DGR-0K O-ring (head cap & handle) Packing and nut assembly (PTFE) 800 DGR-0 Air valve casing 8 80 DGR-08K Air valve kit l9 Air valve washer 0 Air valve plunger Air valve spring Air valve nut model Description 80 DGR-09 Trigger assembly 80 DGR-K a Trigger buttons ergo-pack ( types) Trigger button A (standard) b Trigger button B c Trigger button C d Trigger button D 80 DGR-0K Needle guide, rocker, & spring Needle guide and rocker l Needle spring 8 80 DGR- Spring guide 9 80 DGR- Needle locknut model Description 0 80 DGR-- Needle (for.mm nozzle) 808 DGR- Cutaway handle w/pre-set l O-ring (pre-set needle knob) 800 DGR- Pre-set needle knob 80 DGR- / oz.( cc) cup and lid 80 DGR-8 / oz.(9 cc) cup and lid (standard) 80 DGR-9 / oz.( cc) cup and lid 80 DGR-0 Cup lid 8 80 DGR-K DAGR repair kit DGR--K Air valve washer kit () DGR-8-K O-ring (headcap, handle) kit ()

26 Disposable Cups and Accessories DeKups GRAvITy FEED DIsPOsABLE CuP The Ultimate in Productivity Saves Time and Money Better fluid flow for great color match Positive locking gun connection Refill without opening the cup Self-dispensing packaging Larger capacity cups The DeKups System is covered by U.S. Patent Nos.,80,8 and,,, owned by M Innovative Properties Co., and U.S. Patent Nos.,80,80;,,0;,,9;,0,8;,,00;,,89;,,;,08,9; owned by Inc. DeKups ADAPTERs 8000 / DPC- Adapter (DeVilbiss TEKNA, CVi, PLUS, GTi, PRi, JGA, Binks MG,Sharpe Cobalt, Platinum & Titanium) 800 / DPC- Adapter (Sagola) 800 / DPC- Adapter (Accuspray Issac) 800 / DPC- Adapter (DeVilbiss SRi, SRiW, SRiPro, Binks Cub) oz. DPC-00 & DPC-08 oz. DPC-0 & DPC-0 DeKups Disposables and Reusables model Description FL. OZ./ ml Disposable cup/lid () DPC FL. OZ./0 ml Disposable cup/lid () DPC FL. OZ./000 ml Disposable cup/lid () DPC FL. OZ./ ml Reusable sleeve/lid () DPC FL. OZ./0 ml Reusable sleeve/lid () DPC FL. OZ./000 ml Reusable sleeve/lid () DPC FL. OZ./ FL. OZ. Disposable lid () DPC- 800 / DPC- Adapter (FinishLine, & ) 800 / DPC-00 Conversion Adapter For additional adapters see / DPC-0 Adapter (Sata NR 000, RP, KLC, MCB & Jet 90 series,) 809 / DPC- Adapter (StartingLine touch-up gun) 800 / DPC- Adapter (Sata NR9 & 9, Iwata LPH-00 & W00LV, Astro GF, & 0S, Finex FX 00 & FX 00) 800 / DPC-9-K Suction Conversion Kit 9 oz. DPC-0 & DPC / DPC--K oz./ oz. Disk filter ( micron) () White frame/white mesh 8098 DPC--K oz./ oz. Disk filter (00 micron) () Black frame/ White mesh 800 DPC--K0 Coarse filter (00 micron) Thick paint (0) ACCESSORIES 800 DPC--K0 Fine filter (00 micron) Colors/clears (0) 8090/ DPC-9-K0 oz. Universal measuring guide (0) 809 / DPC-0-K0 9 oz. Universal measuring guide (0) 809 / DPC--K0 oz. Universal measuring guide (0) 809 / DPC--K0 oz. : and : Measuring guide (0) 809 / DPC--K0 oz. : and : Measuring guide (0) 80 / BXX-9 Filters & plugs storage case oz. cup 809 / DPC--K 9 oz. Disk filter ( micron) () White frame/white mesh 8099 DPC--K 9 oz. Disk filter (00 micron) () Black frame/ White mesh 8008 DPC--K0 Very fine filter (00 micron) Pearls (0) 9 / DPC-8 Cleaning bottle 80 / DPC-0 Adapter Kit (Sata QCC full size) 808 / DPC-0 Adapter Kit (Sata Mini, QCC and Threaded ) 80 / DPC-8 Adapter (Iwata SuperNova AirGunsa, LPN00, W00) 800 / DPC-8 Adapter (StartingLine full-size gun, Sharpe Finex 000, 000, 000) 80 / DPC- Cleaning brush 8009 / DPC--K Disposable funnel () 80 / DPC- Disposable lid ()

27 DeKups Demo/Trial Kit 800 DPC- Disposble Cups and Accessories Demo Trial Kit Adapter for DeVilbissTEKNA/Finishline/ Binks (), oz. Reusable Sleeve & Lid (), oz. Disposable Cups & Lids (8), Plugs (), Disk Filter Micron (), Barrel Filter 00 Micron (), Funnel (), Measuring Guide (), How-to-Use Guide DeKups shop start up Kit 80 DPC-0 The DeKups System is covered by U.S. Patent Nos.,80,8 and,,, owned by M Innovative Properties Co., and U.S. Patent Nos.,80,80;,,0;,,9;,0,8;,,00;,,89;,,;,08,9; owned by Inc. Get Started with DeKups Today! Anti-static disposables Contains the pefect amount for several jobs Better fluid flow for greater color match Positive locking gun connection Anti-static cups for improved metallic distribution Larger capacity cups 800 / DPC- 80 / DPC-0 Shop Start Up Kit oz. Reusable Sleeve & Lid (), 9 oz. Reusable Sleeve & Lid (), oz. Disposable Cups & Lids (), 9 oz. Disposable Cups & Lids (), / oz. Disk Filter Micron (), 9 oz. Disk Filter Micron (), Barrel Filter 00 Micron (0), Barrel Filter 00 Micron (0), Funnel (), oz. Disposable Cups (), Cleaning Brush, Cleaning Bottle, Magnets (), How-to-Use Guide oz. Disposable Cup Fits ALL DeKups Adapters 800 DPC-0-K (Kit of cups & lids) 800 / DPC-0-K Simple and affordable solution for spot repair and spraying at mobile repair locations Vented cup design provides consistent fluid flow for better color match and a better quality finish Easy and secure fit over DeKups adapters CUP LID OPTIONAL FILTER (not included) DPC ADAPTER (not included)

28 Disposable Cups and Accessories Gunner Cup by Devilbiss Mix. Extensive range of paint company specified mixing ratios. Eliminate need for additional mix cups Flow. The vented system and large filter design allow for better fluid flow and color match Less fluid flow restriction and starvation make it an ideal solution for spraying waterborne and clearcoats. Store. Flat lid available for easy stacking and storing. Cups, Lids & Adapters model Description Qty/Pkg 80 DMK- oz. cup/filter lid micron blue filter 8 80 DMK- oz. cup/filter lid 00 micron green filter 8 80 DMK- Storage lid, oz. cup 8 80 DMK- Filter lid for oz. cup micron filter 8 80 DMK- Filter lid for oz. cup 00 micron filter 8 80 DMK-0 Adapter, Sata NR000 & RP 80 DMK- Adapter, Sata NR9/9, Iwata DMK- Adapter, DeVilbiss, Binks & Sharpe 809 DMK-8 Adapter, Iwata SuperNova & W DMK-8 Adapter, StartingLine Full Size 80 DMK-00 Conversion Adapter, M 800 DMK-0 Conversion Adapter, Sata 809 DMK--K Cap plug, / dia., for Gunner Cups (waterborne use only) 8

29 Pressure Tanks HEAvy-DuTy, A.s.m.E. CODE PREssuRE TANKs Comply with O.S.H.A. Regulations 9.8 Gallon A.s.m.E. Code Pressure Tank Pressure Tanks model Capacity Regulation ¾ H.P. Air Driven Agitation included 908 8C-0. gal. Single No 900 8C-0. gal. Double No 90 8C-. gal. Double Yes G gal.* Double No (available separately) *8G-0 holds a -gallon pail Pressure Tanks and Cups Quick, efficient cleanup with anti-stat liners Holds a -gallon pail. Gallon A.s.m.E. Code Pressure Tanks 8G-0 A.S.M.E. Code Pressure Tanks Available in single and double regulated versions Quick, efficient cleanup with anti-stat liners 8C-0 8C- 9 PTS-GAL-K000. gal. strainer 0090 HGS- Fluid regulator 9 HAR- 0 CFM fluid pressure tank regulator 99 PTL-0-K0 9.8 gal tank liner ACCESSORIES 800 VS- Filter assembly 800 QMG-8 Agitator assy QS-0 Air motor/ gearbox drive 800 JGA- Fluid tube Pressure Tank Liners Pressure Tank Liners model Description 9 PT- Tank Liner (order quantity 0) 9 PT--K0 Tank Liner 99 PTL-0-K0 Tank Liner Tank Liner Selection Chart 80- DeVilbiss Binks Tank Liners Fits Tank Size Case Qty. PT-. gal. 0 PT--K0. gal. 0 PTL-0-K0 9.8 gal. 0 PTL-0-K8.8 gal qt gal gal gal. 0-9 gal. All PT Series Tanks X X QMGT-00 QMST-00 X X Pressure Tanks QMGT-00 QMST-00 X QMGT-000 QMST-000 X 8B, 8C X X 8G-00 8G-00 X Pressure Tanks and Cups Qt. Cup Steadi-Grip X X X X X PTL-0-K0 PT- & PT--K0 DeVilbiss PT- series tank liners also fit Binks 8B and 8C tank series DeVilbiss PTL-0 series tank liners also fit Binks 8G-00 and 8G-00 tank series Binks PTL-08 series tank liners also fit DeVilbiss QMGT-00 and QMST-00 tank series 9

30 Air In ¼" NPS(M) KK-0 PT II A.s.m.E. Code Pressure Tanks PARTs AND AssEmBLy Refer to Part Sheet: SBBI--0 8C-0 PRESSURE TANK (Includes, and 8 thru ) Air to Spray Gun 9 9A KK-0 Open side of seal (0) faces downward. Pressure Tanks and Cups Fluid Out 8" NPS(M) A ** Air In ¼" NPS(M) * included in KK-0 Kit ( ea. of # s 8, 9, 0 & ). included in PT-0 Air Motor Assembly. included in KK-00- Air Motor Repair Kit. included in KK-00 Strainer Screen & Felt Kit ( ea. of #9, ea. of #0). included in KK-0 Kit ( ea. of # s, & ). included in KK-0 Kit ( ea. of # s 9, 0,, & ). 9 0 Suffixes: -K designates kits of multiple parts. Example: SSG-809-K is a kit of O-Rings. 8 8C-0 & 8C- PRESSURE TANKS (Dual Regulation included with these models) 8 HAR-0 ( 0A) & HAR- ( 0) REGULATOR ASSEMBLIES (HAR- shown) 9 9 Air to Spray Gun 0 9A 0A Fluid Out 8" NPS(M) A model Description Tank Assy. Kit (Includes # s A, 8, 9, 0 & ) A Tank Shell 900 PT-- Lid Gasket, Santoprene Lid, Zinc Plated (Agitator) Air Motor/Adapter Assy. (# s, 8, 9, 0 & ) Purchase locally Street Elbow /" NPT (F) x /" NPT (M) 000 H-008 Nipple /" NPT (M) (8C-0 & 8C-0) x /" NPS (M) (8C- & 8C-) JGA-0-K Packing (Kit of ) Hose Assembly HAV-00 Air Adjusting Valve /" NPS (F) x /" NPT (M) Gauge (8C-0 & 8C-0) Gauge (8C- & 8C-) 9A Purchase locally Pipe Plug /" NPT(M) (Supplied/Regulator) 0 9 HAR- Regulator (All regulated models) 0A 009 HAR-0 Regulator (8C- & 8C-) 900 SSP-0-ZN 90 Swivel Adapter /" NPS (F) x /" NPT (M) Purchase locally Cross /" NPT (F) Safety Valve, 80 PSI 9090 PT- Handle Purchase locally Hex Nut /8" AD- Nipple /8" NPT (M) x /8" NPT (M), S.S. Purchase locally Street Elbow /8" NPT (F) x /8" NPT (M), S.S. *8 Thumb Screw *9 Yoke Assembly *0 Cotter Pin, / x " * Hinge Pin 9089 PT- Fluid Tube 9 PT- Tank Liner Lid, Zinc Plated Hex Nipple /" NPT (M) Drain Valve D.M. Nipple (Universal Pipe Thread) (8C-0 & 8C-) (8C-0 & 8C-) KK-9 Repair Kit 9 O-Ring 0 Spring O-Ring Valve O-Ring Diaphragm Assembly 900 PT-0 Air Motor Assembly End Cap End Cap Gasket 8 90 PT-8 Bearing 9 Purchase locally Screw (/" -8 x /" ) 0 Front Plate End Plate Spacer Dowel Pin Body Vane Rotor Assembly End Plate 90 PT- Shaft Seal 8 Air Motor Adapter 9 Purchase locally Set Screw (/" -0 x /" ) KK-0 Seal Assembly Shaft Coupling 90 SSG-809-K O-Ring (Kit of ) Adapter Nut Shaft Propeller Assembly Propeller A Purchase locally Set Screw (/" -0 x /8" S.S.) Muffler Assembly 8 See Body 9 See Screen 0 See Felt See Cap 9 KK-0 Agitator Shaft Assy. (Optional-Order Separately) 0

31 KBII Pressure Cup 00 KB- EZ Liner Kit for KBII Pressure Tanks and Cups KBII Pressure Cup and Liner Kit model Capacity Regulation 00 KB- 90 EZ Liner Kit for KBII KK-0 -qt. Yes N/A ¾" H.P. Direct Drive Air Driven Agitation Included 90 KK-0 Comfortable to carry. Easy clean ups with disposable liners Refer to Service Bulletin: SB (KK-0) ADAPTER FITTING & HOSE KIT Allows flushing of cup tube, hose and gun using SolventSaver. Kit includes: HD-0 adapter fitting and ' hose assembly. 8 Stainless Steel Fluid Tube Kit 908 (KK-99) For waterborne compatibility use KK-0 disposable cup liners and KK-99 Fluid Tube Kit Description Qty. 0A Locknut A Gasket A Fluid Tube Assembly Solvent Saver KB II Aluminum Fluid Tube Kit 908 (KK-99) (Not waterborne compatible) Description Qty. 0 Locknut Gasket Fluid Tube Assembly /A Fluid Outlet /8" NPS (M) / A Air Outlet /" NPS (M) 0 * 9 Air Inlet /" NPS (M) 8 *ITEM # Apply thread sealant (i.e. Loctite # Med. Strength Blue or equivalent) onto threads. Order model Description 90 KB- Retaining Ring l 90 KB-8-K Slip Ring (Kit of ) + 90 KB- Handle Secondary (purchase locally) Nut /" P-MB- Adapter l 90 KB- Pressure Bleed Valve (For KB-) 9090 KB-0 Lid w/handle (For KB-) 8 90 GA- Pressure Gauge 0-0 PSI l9 90 KB-80-K Gasket (Kit of ) MBD--K Locknut (For KB-, Kit of ) u0a Locknut 908 KB- qt. cup (For KB-) l 900 KB--K Check Valve (Kit of ) l 909 KB-8-K Gasket (Kit of ) 908 TIA- Safety Valve 9088 KB-8- Regulator Assembly Valve Spring Valve, PTFE 8 Valve Seat & O-Ring Assembly 9 Diaphragm, PTFE protected 0 Slip Ring Regulator Spring Nut Adjusting Screw Bonnet u 90 KB-0-K Gasket (Kit of ) Fluid Tube Assembly (Aluminum) ua Fluid Tube Assembly (Stainless Steel) 908 KK-99 Fluid Tube Kit (Aluminum for KB-) A 908 KK-99 Fluid Tube Kit (Stainless Steel) 8 90 KK-0 Adapter Fitting & Hose Kit 9 90 KK-0 Cup Liner Kit l Recommended spare parts. + A secondary handle () has been provided with each cup. May be used for "Belt Hanging." Suffixes: -K, -K, -K, -K designate kits of multiple parts. Example: KB-8-K is a kit of Slip Rings.

32 Pressure Tanks and Cups solvent saver Hose & Gun Cleaner Solvent Saver Hose & Gun Cleaner ¾" H.P. Direct Drive Air Driven model Capacity Regulation Agitation Included 800 HD-0 -qt. N/A N/A 800 HD-0 A Real Time Saver Cleans fluid hoses quickly without wasting solvent Refer to Service Bulletin: SB Order model Description Needle Valve Assembly Needle Valve Gasket (Kit of ) 908 TIA- Safety Valve Lid 90 KB-8-K Ring Gasket (Kit of ) 90 KB- Retaining Ring 90 KB-80-K Gasket Kit (Kit of ) KB- Cup ( quart) SSG-88-K O-Ring Kit (Kit of ) 0 Hub Assembly * Purchase locally Nut (/-8) 90 KB- Handle 8 OPTIONAL: 90 (KK-0) ADAPTER FITTING & HOSE KIT Allows flushing of cup tube, hose and gun using SolventSaver. Kit includes: adapter fitting and hose assembly. 8 Solvent Saver KB II

33 Air Control CT Plus -stage FILTER system 0 Complete compressed air treatment and drying center CamAir CT Plus Description 0 CT Plus -stage desiccant filter system 0 Filter element, water (st stage) 08 Filter element, coalescing (nd stage) 00 DC0 desiccant cartridge Worry free air filtration for top quality paint jobs First stage filter removes oil, water and dirt down to 0 micron Second stage coalescer removes oil vapors and dirt particles down to.0 micron CT0 desiccant tank repeats dirt and oil aerosol removal and removes humidity 0 CFM air flow capacity Easy and economical maintenance Longer desiccant life Air inlet valve shuts off CT Plus air without having to shut off shop air No tools needed to change first and second stage filters Easy change-out desiccant cartridge bag Ergonomic, self-relieving regulator Refer to Service Bulletins and Instructions: SB--8, SI--8-8, SI--8-0 Air Outlet Manual Drain Manual Drain Water Separator Oil Coalescer Air Inlet -Stage Filter Set Part Description -STAGE FILTER SPECIFICATIONS Air Flow 90 PSIG Max. Pressure 0 PSIG Max. Temperature 0 F 09 Drain Kit ( set) 0 Filter Element, Water 08 Filter Element, Coalescing 00 Indicator Kit, Coalescing VA-9 Shut-off Valve CT0 Description 00 Humidity Indicator ( Humidity Indicator Paper included) 0 Drain (Manual) 00 Gasket * 00 Desiccant Cartridge (not shown) * Material Safety Data Sheet (MSDS-) available upon request. CT0 SPECIFICATIONS Air Inlet /" NPT (Female) Air Outlet /" NPT (Female) Air Flow Capacity 0 CFM Max. Operating Pressure 00 PSIG ( Bar) Max. Temperature 0 F (. C) Humidity Indicator Green: OK Yellow: Replace Desiccant Water Vapor Removal -0 F Dew point Partical Removal 0. micron Manual Drain Included Regulator Part Description 0 Regulator Kit VA-9 Shut-off Valve GA-88 Gauge REGULATOR SPECIFICATIONS Air Flow 00 PSIG Max. Inlet Pressure 0 PSIG Regulated Pressure Range PSIG Max. Temperature F

34 Air Control -stage Filter system 0 -Stage w/regulator 0 -stage Filter system 0 -STAGE FILTER SYSTEM MEETS TYPE GRADE D BREATHABLE AIR PARTICULATE REQUIREMENTS Water Separator 0 -Stage w/ Regulators Water Separator Oil Coalescer Oil Coalescer Charcoal Adsorber Flow (SCFM) CamAir Filter Systems Description 0 -stage filter unit with regulator 0 -stage filter unit with regulators Flow vs Pressure Drop of 0 -Stage Filter Unit 90 PSIG 0 PSIG 0 PSIG Pressure Drop (PSIG) Air Filtration/Regulation Systems Compact and effective perfect for cramped shop spaces Removes dirt, water and oil from air lines to 0.0 micron assures superior finishes Quick change bowls and air inlet valve accommodate rapid, trouble free maintenance without shutting off main shop air Combine -stage filter with the CT-0 desiccant dryer to create a CT Plus -stage filter system 90 PSIG Refer to Service Bulletins and Instructions: SB--8, SI--8-8, SI Stage w/regulator 0 -Stage w/regulators (optional) -Stage Filter Set Part Description 09 Drain Kit ( set) 0 Filter Element, Water 08 Filter Element, Coalescing 00 Indicator Kit, Coalescing VA-9 Shut-off Valve -stage FILTER specifications Air Flow 90 PSIG Max. Pressure 0 PSIG Max. Temperature 0 F REGuLATOR specifications Air Flow 00 PSIG Max. Inlet Pressure 0 PSIG Regulated Pressure Range PSIG Max. Temperature F -Stage Regulator Part Description 0 Regulator Kit VA-9 Shut-off Valve GA-88 Gauge -Stage Filter Set Part Description 09 Drain Kit ( set) 0 Filter Element, Water 08 Filter Element, Coalescing 00 Indicator Kit, Coalescing VA-9 Shut-off Valve 0 Filter Element, Charcoal -Stage Regulator Part Description 0 Regulator Kit H-008 Adapter GA-88 Gauge GA- Gauge, Upside Down VA-9 Shut-off Valve (optional)

35 CT0 & CT0P DEsICCANT CARTRIDGE DRyERs Patent Air Control CT Desiccant Cartridge Dryer Description 000 Desiccant Air Dryer wall mount 00 Desiccant Air Dryer portable with stand 000 CT0 Wall Mount 00 CT0-P Portable Completely portable Allows placement at point of use 00 (CT0-P) Easy Change Desiccant Air Dryer CT series desiccant air dryers remove water vapor from the compressed air down to a dew point of -0 F Quick change 0 lb. desiccant cartridge bag is made of a special fiber media which removes oil aerosols and solid particles down to 0. micron meaning no need for coalescing or final filters Install at point of use 0 CFM air flow capacity Refer to Service Bulletin: SB--8 Air Outlet Description 00 Humidity Indicator ( Humidity Indicator Paper included) 0 Drain (Manual) 00 Gasket * 00 Desiccant Cartridge (not shown) * The Material Safety Data Sheet (MSDS-) is available upon request. specifications Air Inlet Air Outlet Air Flow Capacity Maximum Operating Pressure Maximum Temperature Humidity Indicator Water Vapor Removal Partical Removal Manual Drain ½" NPT (Female) ½" NPT (Female) 0 CFM 00 PSIG ( Bar) 0 F (. C) Green: OK Yellow: Replace Desiccant -0 F Dew point 0. micron Included Air Inlet 000 Dryer Shown

36 Air Control DAD-00 DEsICCANT AIR DRyER system Desiccant Air Dryer model Description 00 DAD-00 -stage desiccant air dryer system 00 DAD-00 Avoid Costly Redo s Properly maintained air filtration system eliminates moisture and dirt in air lines Install at point of use Compare DeVilbiss filtered air vs. unfiltered air DeVilbiss DAD-00 filters out contaminants to.0 micron Oil CleanAir = Better Finish Dirt Compare the humidity reading before and after filtering with DeVilbiss DAD-00 Also includes ½" ball valve shutoff for easy maintenance Rust UNFILTERED AIR FILTERED AIR READING BEFORE FILTERING (0.% Relative humidity) READING AFTER FILTERING (.% Relative humidity) Refer to Service Bulletin: SB Order model Description Water Separator Filter 00 HAF-0 Oil Coalescing Filter 009 HAR-0 Air Regulator 90 GA-88 Gauge 009 VA- Ball Valve 909 DAD-8 Air Filter (inside of tank) 9089 DAD-00 Humidity Indicator (paper included) PT- Desiccant Tank (without desiccant) (incl. #) HAF-0 Filter Change Indicator DAD- Desiccant Refill + 90 HAF- Filter (see Key Maintenance Items chart) HAF-8 Filter (see Key Maintenance Items chart) 0 80 SSG-8-K O Ring Kit 80 PT-9 Pipe Plug special -/ NPT 8088 VA-9 Brass Shut Off Valve (not shown) specifications: -00 (HAF-0) Water separator Filter Air Inlet & Air Outlet ½" NPT(F) Air Flow Capacity 00 CFM Max. Operating Pressure 0 PSIG (0. Bar) Max. Temp. 0 F (. C) Automatic Drain Standard Filter micron 0 HAF-0 Oil Coalescing Filter Air Inlet & Air Outlet ½" NPT(F) Air Flow Capacity CFM Max. Operating Pressure 0 PSIG (0. Bar) Max. Temperature 0 F (. C) Automatic Mechanical Drain Standard Pressure Differential Indicator Standard Filter 0.0 micron Desiccant Dryer Air Inlet & Air Outlet ½" NPT(F) Air Flow Capacity CFM Max. Operating Pressure 0 PSIG (0. Bar) Max. Temperature 0 F (. C) Humidity Indicator Standard Water Vapor Removal -0 F Dew Point + Key Maintenance Items (Replace periodically for efficient performance) Order model Description 908 DAD- Desiccant Refill 90 HAF- First stage water separator filter element ( micron) 908 HAF-8 Second stage coalescing filter element (.0 micron) HAR-0 Air Regulator Air Inlet /8" NPT(F) Air Outlet ¼" NPT(F) ( each) Air Flow 0 CFM Max. Operating Pressure 0 PSIG (0. Bar) Max. Temperature 0 F (8.9 C) VA-9 Main Air Supply Shut Off Valve (not shown) Air Inlet & Air Outlet Max. Operating Pressure Shipping Weight DAD-00: lbs Dimensions DAD-00: " " 8" ½" NPT(M) PSIG (.0 Bar) Tune-Up Kit 000 (DAD-00) model Description Qty. DAD- Desiccant Refill HAF- Filter Element for -00 Tune-Up Kit 808 (DAD-00-) model Description Qty. DAD- Desiccant Refill HAF- Filter Element for -00 HAF-8 Filter Element for HAF-0

37 Air Control CAmAIR QC FILTER AND DRyER unit Order No 0 QC Desiccant Cartridge Dryer Description 0 Desiccant Filter and Dryer Unit 0 QC Filter and Desiccant Cartridge Replacement FinishLine AIR CONTROL unit 0099 HAR-0 FinishLine Air Control Unit model 0099 HAR-0 9 HAF-9 Description 0 CFM air line filter w/ 0 CFM regulator Filter element and gasket kit A Great Choice for Light Usage such as Low Volume Shops, Restorers, Customizers, and Hobbyists Three-stage filtering with 0. micron rating produces clean, oil- and humidity-free air. High performance filtration with only PSI pressure drop. Quick change filter cartridge is easy to maintain. Bowl removal tool included. Larger filter media and longer life desiccant than disposable dryers Install at point of use 0 Includes: micron particle filter Mounting bracket Regulator and gauge The Value Leader Removes moisture and dirt Regulates air pressure ACCESSORIES 9 / GA- Gauge for HAR-0 regulator 9 / HAF-9 HAR-0 Element Kit 000 / HAR-0 0 CFM regulator for HAR-0 0 Refer to Service Bulletin: SB--90 Refer to Service Bulletin: SB specifications Air Inlet Air Outlet Air Flow Capacity Max. Operating Pressure ½" NPT (Male) ½" NPSM (Male) CFM 0 PSI model Description 000 HAR-0 Regulator 8088 VA-9 Shut-Off Valve 9 GA- Pressure Gauge 0 0 Cartridge, Dryer Filter* Purchase Locally Socket Head Screw, / Purchase Locally Wingnut, /-0 80 KK-088 Regulator Repair Kit 8 Purchase Locally mm Hex Key Wrench HAF- Gasket, Filter Bowl *Cartridge includes indicator window & humidity paper model Description 000 HAR-0 Regulator 00 VA-9 Shut-Off Valve 9 GA- Pressure Gauge 9 HAF-9 Element & Gasket Kit Purchase Locally Socket Head Screw, /-0 x / Purchase Locally Wingnut, /-0 80 KK-088 Regulator Kit (Purchase Locally) specifications Air Inlet ½" NPT (female) Air Outlet ¼" NPS (male) acity 0 CFM filter 0 CFM regulator Max. Pressure 0 PSI Max. Temperature 0 F (. C) Filter Size micron

38 Air Control Clean Air AIR LINE FILTERs AND CONTROL units Air Filtration and Regulation Systems Remove Dirt, Oil Vapor, and Water from Air Lines -00 Clean Air Air Line Filters and Control Units model Description 0098 HAF-8 Two-stage filtration system, including centrifugal and coalescer w/ 0 CFM regulator CFM air line filter CFM air line filter w/ 0 CFM regulator ACCESSORIES Removes dirt, water and oil perfect for low humidity conditions HAF-8 HAF-8 Quick Facts: st Stage micron filter nd Stage.0 micron filter Easier maintenance comes with manual flexible drain 009 / HAR-00 0 CFM regulator w/gauge 90 / HAF-8 Automatic drain Refer to Service Bulletins: SB--0, SB--, SB-- 00 (-00)00 CFM Air Line Filter 009 (HAR-0) 0 CFM Air Regulator 00 (HAF-0) CFM Coalescing Filter (not shown) A 9 (optional) Order 9 model Description * Gasket * Baffle l Bowl O-Ring (comes w/#) 90 HAF- Filter & O-ring Kit 908 HAF- Baffle Kit (includes,,& ) * Element Retainer 90 HAF- Manual Flexible Drain 8 90 HAF-8 Transparent Plastic Bowl 9 9 HAF-9 Bowl Guard HAF-09 Clamp Ring Assembly Optional Accessories model Description 90 GA-88 Gauge, 0# " Diameter 90 HAF-8 Automatic Drain allows maintenance-free drainage 009 VA- Ball Valve 908 HAF-0 Bracket Assembly for -00 and Order model Description #0-x9/ Fillister Hd. Screw 99 HAR- Cover Spring Button Diaphragm Spring Body Pipe Plug /" NPT(M) Bottom Plug +8 9 KK-9 Repair Kit (Does NOT incl. # & #) (See contents below) + Regulator Repair Kit 9 (KK-9) Description Qty. 9 Diaphragm Assembly 0 O-Ring Valve O-Ring Spring O-Ring model Description 9088 HAF-0 Filter Change Indicator A Cover O-Ring (comes w/#) 908 HAF-8 Filter & O-Ring Kit 90 HAF-8 Automatic Drain (Standard) 90 HAF-8 Plastic Bowl 9 HAF-9 Metal Bowl Guard 9089 HAF-09 Clamp Ring 8 / x /8 Vinyl Tubing ft HAF- Manual Drain (Optional) NOTE The regulator on CleanAir Units manufactured prior to 9/9 was -00 (HAR-0). HAR-00 includes HAR-0 Regulator, GA-88 Gauge and VA- Ball Valve.

39 Air Regulators Air Regulator with Gauge and valve HAR-00 Air Regulator 9 HAR- 000 HAR-0 0 Inlet ½" NPT (F) Outlet ½" NPT (F) HAR- Inlet ⅜" NPT (F) Outlet ¼" NPT (F) HAR-00 Inlet ⅜" NPT Outlet ¼" NPT ( ea.) HAR-0 Inlet ⅜" NPT (F) Outlet ¼" NPT (F) Air Regulators model Description 0 CFM air regulator, gauge and valve (regulator available separately as 0) 009 HAR-00 9 HAR- 000 HAR-0 0 CFM air regulator, gauge and valve (regulator available separately as HAR-0) 0 CFM air regulator Flow through regulator for pressure tanks 0 CFM air regulator - non-relieving (purchase GA- gauge separately) For Precise Control of Air Delivery Refer to Service Bulletins SI--8-0 and SB-- and Part Sheet (HAR-0) 9 (HAR-) model Description 0 Regulator Kit VA-9 Shut-off Valve GA-88 Gauge model Description HAR-0 Regulator Kit KK-088 Repair Kit (HAR-00) Air Inlet /8" NPT /" NPT Outlet /" NPT Outlet model Description HAR-0* Regulator GA-88 Gauge /" NPT Street Elbow VA- Ball Valve." NPT Plug *HAR-0 Regulator model Description #0-x9/ Fillister Hd. Screw HAR- Cover Spring Button Diaphragm Spring Body Pipe Plug /" NPT(M) KK-9 Repair Kit (incl. # 8-) 8 Diaphragm Assy 9 O-Ring 0 Valve O-Ring Spring O-Ring Bottom Plug model Description #0-x9/ Fillister Hd. Screw HAR- Cover Spring Button Diaphragm Spring Body Pipe Plug " NPT(M) Bottom Plug l8 Diaphragm Assy. l9 O-Ring l0 Valve l O-Ring l Spring l O-Ring l Available only as part of KK-9 Repair Kit; order separately. 9

40 Automatic Drain Automatic Drain with y-strainer valve Automatic Drain with Y-Strainer Valve Description 0 Automatic drain with Y-strainer valve 0 Automatically Drains Water from Compressed Air Systems Use with air compressors, water separators and at drop legs See properly piped shop diagram for install locations (pg. ) Adjustable interval time and drain time Removable filter for easy cleaning Includes electric timer, ¼" Y-strainer valve with filter screen and ft. power cord Refer to Service Bulletin: SB--8 Inlet ¼ NPT(F) ½ NPT(M) Shut-off valve specifications: Timer Interval time (T). - minutes Discharge time (T). - 0 seconds Supply voltage 0v/0hz Current Consumption ma Max. Operating Temperature - F to F Environmental Protection NEMA Case Material ABS Plastic FR Grade valve Type -way direct acting valve In/Out Ports /" NPT Female Max. Working Pressure 0 PSI Operating Temperature F to F Ambient Media Temperature 9 F Max. Valve Body Forged Brass Mounting Any Position Typical Installation Drain can be mounted in any position and can be installed outside. Drain outlet ¼ NPT(F) Timer drain By-pass valve T E ST Filter screen To downstream Condensate Y-strainer & Shut-off valve 0 Strainer

41 Air Filtration Service Air Filtration service from Devilbiss Automotive Refinishing Air Filtration unit service Part Description Replacement Interval Camair CT stages in one! Quick change bag removes water vapor from compressed air down to a dew point of -0ºF. Desiccant Cartridge for CT0. Indicator provided green=ok yellow=replace 0 First stage removes water and dirt to 0 microns. Filter element, water and particulates for the new Camair -stage. Replace every months Camair 0 08 Second stage removes oil and vapors to.0 micron. Filter element, coalescing for the new Camair -stage. (Check with air flowing) 0 First stage removes water and dirt to 0 microns. Filter element, water and particulates for the new Camair -stage with self-relieving regulators. Replace every months 08 Second stage removes oil and vapors to.0 micron. Filter element, coalescing for the new Camair -stage with self-relieving regulators. (Check with air flowing) Camair 0 0 Third stage removes oil vapor and odors. Filter element, charcoal for the new Camair -stage with self-relieving regulators. Replace every weeks HAF- First stage removes water and dirt to microns. Filter element, water and particulates for DAD-00. Replace every months HAF-8 Second stage removes oil and vapors to.0 micron. Filter element, coalescing for DAD-00. Indicator provided green=ok red=replace (check with air flowing) DAD- Third stage removes humidity from the air. 0 lbs Desiccant refill for DAD-00. Indicator provided blue=ok pink/white=replace DeVilbiss DAD-00 DAD-00 Tune Up Kit for DAD lbs desiccant and filter element See above for filter change outs Complete Tune Up Kit for DAD lbs desiccant, filter element, coalescing DAD-00- filter element See above for filter change outs 00 Second stage removes oil and vapors to.0 micron. Filter element, coalescing for TS-0. Replace every months Camair TS Complete Tune Up Kit for TS-0. 0 lbs desiccant, coalescing filter, humidity indicator. Indicator provided green=ok yellow=replace 0 First stage removes water and dirt to microns. Filter element, water and particulates for Sharpe 0. Replaces Sharpe. Replace every months Sharpe 0 00 DAD- Second stage removes oil and vapors to.0 micron. Filter element, coalescing for Sharpe 0. Replaces Sharpe. (Check with air flowing) Third stage removes humidity from the air. 0 lbs Desiccant refill for two -lbs changes of Sharpe 0. Replaces Sharpe -. Indicator provided: blue=ok; pink/ white=replace (place indicator paper into sight glass) FinishLine HAR-0 HAF-9 Removes water and dirt to microns. Filter element, water and particulates for HAR-0. Replace every months Sharpe F88 08 Removes water and dirt to microns. Filter element, water and particulates for Sharpe F88. Replaces Sharpe 9. Replace every months Sharpe 0 HAF-9 Sharpe is a registered trademark of Graco Inc. Removes water and dirt to microns. Filter element, water and particulates for Sharpe 0. Replaces Sharpe 990. Replace every months

42 Properly Piped Shop Properly Piped shop Slope Line Water and Particulate Filter/Regulator #0 Slope Line AIR TOOLS LOWEST POINT Auto Drain # 0 GENERAL PURPOSE Water and Particulate Filter/Regulator #0 Refrigerated Dryer Main Line Filter CT Plus -Stage Filter/Desiccant Dryer #0 PREP AREA ft. /8" Air Hose with High Flow Fitting HA-8 #00 0 F e e t M i n i m u m Heat Resistant Flex Hose Compressor Auto Drain # 0 CT Plus -Stage Filter/Desiccant Dryer #0 SPRAY BOOTH ft. /8" Air Hose with High Flow Fitting HA-8 #00

43 Hose and Fittings Hose Premium Hose Helps Ensure Premium Paint Jobs Smooth Cover Spray and Air Tool Hose Can be used for all kinds of air-operated equipment. Smooth brick-red cover, synthetic rubber compound tube with high tensile strength braid. Hose offers superior resistance to oil, weathering, ozone and abraision. Can be used with reusable or permanent crimp connections. Maximum application temperature: 0 F Nyliner II Fluid Hose Ideal for use with a wide range of materials such as resins and solvents contained in latices, epoxies, urethanes, alkyds, primers, acrylics, ketone, MEK, acetone, polyesters, silicones, bitumastic coatings, oil and water-based paints, lacquers, latex coatings, toluene, turpentine, naptha, and many other solvents. Tube is nylon; cover is black neoprene rubber; yarn reinforced. Can be used with permanent crimp or reusable connections. Maximum application temperature: 0 F For properly piped shop information, see page Air Hose Assemblies size I.D. Hose Assy model /" 000 HA- /" 000 HA-0 /8" 009 HA-8 /8" 00 HA-8 /8" 00 HA-8 /8" 00 HA-80 Length of Hose (feet) Bulk Hose# Connection Thread size Type of Connection Connection Nut & Nipple H-9 /" NPS (F) Swivel Three-Piece Reusable 00 P-HC- 0 H-9 /" NPS (F) Swivel Three-Piece Reusable 00 P-HC- H-98 /" NPS (F) Swivel Three-Piece Reusable 008 P-HC-8 H-98 /" NPS (F) Swivel Three-Piece Reusable HC-9 P-HC-8 H-98 /" NPS (F) Swivel Three-Piece Reusable 00 P-HC-8 0 H-98 /" NPS (F) Swivel" Three-Piece Reusable 00 P-HC-8 HA-8 HVLP Air Hose Assembly includes HC-9 High Volume Air Quick Disconnect and HC-9 Stem. Fluid Hose Assemblies size I.D. Hose Assy model /8" 0008 HA- /8" 000 HA- /8" 00 HA-0 /" 00 HA- Length of Hose (feet) Bulk Hose Chart Bulk Hose# Connection Thread size Type of Connection Type of Hose size I.D. size O.D. Bulk Hose model maximum Working Pressure (PsI) Feet/Reel () Smooth /" /" H Cover /" /8" H Air /8" /" H Nyliner II /" /" H Fluid /8" /" H Connection Nut & Nipple H-9- /8" NPS (F) Three-Piece Reusable 00 P-HC-8 H-9- /8" NPS (F) Three-Piece Reusable 00 P-HC-8 0 H-9- /8" NPS (F) Three-Piece Reusable 00 P-HC-8 H-9- /8" NPS (F) Three-Piece Reusable 00 P-HC- Air/Fluid Hose Set (for use with KBII Cup) model 009 KB-00 Length Bulk Air Hose ' 9" 000 H-9 Bulk Fluid Hose Connection Thread size /" NPS (F) Swivel Connection Type of Connection Nut & Nipple Three-Piece Reusable 00 P-HC- ' " 000 /8" NPS (F) Three-Piece Reusable 00 H-9- P-HC-

44 Hose and Fittings Hose Fittings Reusable Connections Hose Size and Type Designed to Optimize Air Flow for Top Spray Gun and Air Tool Performance Fits Devilbiss size I.D. size O.D. Hose /" /" H-9 H-9- (m) male (F) Female Connection Thread size /" NPS (F) /8" NPS (F) /" /8" H-9 /" NPS (F) /" NPS (M) /8" /" H-9- /" NPS (F) /8" NPS (F) /" NPT (M) straight Connections Female Complete Connection P-HC- P-HC- P-HC- P-HC-99 P-HC-8 P-HC-8 P-HC-9 Quick Disconnects - High Flow Ball and Ring Lock Type (For use with HVLP Spray Equipment) Connection Thread size HC-9 (A) 0 /" NPT (M) HC-0 (B) 08 /" NPT (F) stem Number Thread size HC- (C) 00 /" NPT (M) HC-9* (D) 0 /" NPS (F) *Designed for spray guns. Special cone seat prevents leaks! (A) (B) (C) (D) Pressure Drop Comparison at 0 PSI inlet at SCFM Nipples (MBE) Male Both Ends Part Number straight Type male Thread male Thread AD- /" NPS /" NPS H-008 /" NPS /" NPT H- /8" NPS /8" NPS AD- /8" NPS /8" NPT Adapters Part Number straight Type male Thread Female Thread AD-0 /" NPS /8" NPS P-H-0 /8" NPS /" NPS The chart above shows test data at SCFM using: Valves - Ball Type Part Number Thread VA-0 /8" NPS (M) x /8" NPT (M) VA- /" NPS (M) x /" NPT (M) VA-9 /" NPT (M) x /" NPT (M) DeVilbiss high flow HC-0 coupler, HC-9 stem. RBL coupler, stem. Sharpe 80 coupler, 80 stem. Original DeVilbiss P-HC-0 coupler, P-HC-0 stem. Milton/Sata " P" style 80 coupler, 80 stem. Milton " M" style S coupler, S stem. Sata/Milton " T" style 8 coupler, 8 stem. Milton " A" style S coupler, S stem. Coupler Part Number SSP-9 Thread /" x /" NPT (F)

45 Hose and Fittings Hose Fittings 009 P-HC-8 Female Thread /8" NPS special Cone seat Prevents Leaks! Spray Equipment (Female Stem) 0 HC-9 /" NPS (F) Air Tools (Male Stem) 00 HC- /" NPT (M) 0 P-HC-808- /8" NPS (M) 08 HC-0 /" NPT (F) 0 HC-9 /" NPT (M) 00 P-HC-8 /8" NPS (F) Fluid Hose 000 H-9- /8" I.D. 00 P-HC-99 /" NPT (M) Air Hose 000 H-9 /" I.D. 00 P-HC- /" NPS (F) Air Hose 000 H-98 /8" I.D. 00 P-HC-8 /" NPS (F) NPT = tapered NPS = straight (M) = Male (F) = Female Whenever possible, match straight threads with straight threads and tapered with tapered. Otherwise, leakage may occur.

46 Air Regulators and Air Adjusting Valves Digital Gauge with Air Adjusting valve 809 HAV DGI-0 Digital Gauge Only Gun Mounted Air Adjusting Valves, Regulators and Gauges model max. Inlet Pressure max. Reg. Pressure PsI Air Inlet Air Outlet 00 HARG-0 00 /" NPS (M) /" NPS (F) (Swivel) 8000 HAV-00 N/A /" NPS (M) /" NPS (F) (Swivel) 8000 HAV-0 w/gauge (Gauge Range) /" NPS (M) /" NPS (F) (Swivel) HAV- w/gauge (Gauge Range) /" NPS (M) /" NPS (F) (Swivel) 80 HAV- w/gauge (Gauge Range) /" NPS (M) /" NPS (F) (Swivel) 809 HARG /" NPS (M) /" NPS (F) (Swivel) 8089 DGI-0 Digital 0. 0 (Gauge Range) /" NPS (M) /" NPS (F) (Swivel) 809 HAV- Digital 0. 0 (Gauge Range) /" NPS (M) /" NPS (F) (Swivel) Specifications: Accuracy to +/- 0. PSI UL/CSA approved Gauge range:. to 0 PSI Auto off after seconds to preserve battery life Up to years of battery life, depending on usage High Output Air Adjusting valves and Gauges 8000 HAV HAV-0 w/gauge HAV- w/gauge HAV- HAV HAV- w/gauge HAV-0 Air Regulators HAV- 00 HARG-0 HAV- 809 HARG- w/digital Gauge HARG- Digital HARG-0

47 Breathable Air systems Protect Your Health with an Air Supplied Respirator and Filtration NIOSH Approved (TC 9C-0) Meets OSHA Requirements Breathable Air Systems model No 0 MPV- 009 MPV- 000 MPV- 008 MPV-0 Belt Regulator and Hood Assembly Breathable Air Hose (0') Breathable Air and Respirators of visor Covers Included Filtration unit Included Yes No None Filtration Description Yes Yes DAD-0 Stage Filtration with Desiccant Air Dryer System Yes Yes HAF-0 Stage Filtration System Yes Yes DAD-0 Desiccant Retrofit System Air Vizor requires proper air line filtration and carbon monoxide (CO) monitoring to complete an approved supplied air respirator. A carbon monoxide (CO) monitor may be purchased locally or from ENMET Corp. (--0). Order form available from DeVilbiss upon request. Also includes ½" ball valve shutoff for easy maintenance DAD-0 HAF-0 Breathable Air Filtration model 0089 DAD HAF DAD-0 Description -stage filtration with dessicant air dryer system -stage filtration system Desiccant retrofit system Removes Dirt to micron Removes Liquid Water Removes Oil Aerosols Removes Humidity Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes, when used with DAD-00 or HAF-8 Yes, when used with DAD-00 or HAF-8 Yes, when used with DAD-00 or HAF-8 Yes, when used with DAD-00 Removes Odor Yes DAD-0 Breathable Air Hose model Description 00 MPV-0 0' Breathable air hose assembly 00 MPV-0 0' Breathable air hose assembly

48 -00 (SB--0) Stage Centrifugal Filter 9 Breathable Air Filtration units PARTs AND AssEmBLy Refer to Service Bulletins: SB--9 DAD-0 SB-- HAF-0 8 Breathable Air and Respirators 8 HAF-0 (SB--) Stage Coalescing Filter Not Shown DAD-0 (SB--) Desiccant Dryer Retrofit HAF- (SB--) Stage Charcoal Filter Not Shown 0 model Description Air Filter/Separator 00 HAF-0 Coalescing Filter 008 HAF- Charcoal Filter 009 HAR-08 Flow-Thru Regulator 9099 MPV- Breathable Air Quick Release Socket 909 DAD-8 Screen (Not Shown) 9009 GA- Gauge PT- Desiccant Tank (without desiccant, includes ) DAD-00 Humidity Indicator ( Humidity Indicator Paper Included) 0 90 GA-88 Gauge 009 HAR-0 Air Regulator 009 VA- Ball Valve 908 DAD- Replacement Desiccant (Not Shown) ( Humidity Indicator Paper Included) 000 DAD-00 Desiccant Tune-Up Kit (Not Shown) Includes ea: DAD-, DAD-, & HAF- 808 DAD-00- Desiccant Tune-Up Kit (Not Shown) Includes ea: DAD-, DAD-, HAF- & HAF MPV- Quick Release Socket (Not Shown) 9088 HAF-0 Filter Change Indicator (Not Shown) Cover HAF- Baffle Kit 9 90 HAF- Filter & O-Ring Kit HAF-8 Filter & O-Ring Kit 909 HAF- Filter & O-Ring Kit 90 HAF-8 Automatic Drain (Standard) 90 HAF- Manual Drain (Optional) 90 HAF-8 Plastic Bowl 9 HAF-9 Metal Bowl Guard 9089 HAF-09 Clamp Ring / x /8 Vinyl Tubing, ft. l KK-0 Diaphragm Repair Kit 9 99 HAR- Cover 0 Spring Button Diaphragm Spring Bottom Plug 9 KK-9 Repair Kit HAR-08 (SB--) Air Regulator Body Assembly (Not included in Repair Kit) Body Cover (Not included in Repair Kit) 8 l Diaphragm Repair Kit 9098 (KK-0) Description Qty. Thrust Washer Adjusting Screw Assembly Main Spring Slip Ring Diaphragm Assembly Valve Assembly Valve Spring Bottom Plug O-Ring HAR-0 (SB--) Air Regulator Body & Pipe Plug (Not Included in Repair Kit) 9 0 Repair Kit 9 (KK-9) Description Qty. Diaphragm Assembly O-Ring Valve O-Ring Spring O-Ring

49 Breathable Air and Respirators Air vizor PARTs AND AssEmBLy Refer to Service Bulletin: SB--00 Visor Browguard Crown Strap Adjustment Respirator Feed Tube Browguard Tension Knob Headband Adjuster Knob 8 MPV- Mini QD Coupler (sold separately) 0 Carbon Filter Indicator 9 Connect to source of Grade D air Breathable Air Hose (order separately) Air Supply Inlet specifications: Operating inlet air pressure range: PSI 00 PSI Nominal flow rate to Vizor:. CFM Maximum operating temperature: 0 F Order model Description 0 MPV-80 Visor Assembly (Includes # s -8) 08 MPV--K0 Visor Cover (Kit of 0) 0 MPV-90 Visor Window 0 MPV-8 Browguard Assembly 0 MPV-9 Fabric Face Seal 00 MPV- Tube & Diffuser Assembly 00 MPV- Hair & Neck Cover 8 Storage Bag 9 00 MPV-9 Waist Belt/Filter Assembly (Includes # s 0-) 0 0 MPV- Mini QD Coupler 00 MPV- Regulator & Housing 009 MPV- Disposable Carbon Filter 0 MPV-00 Waist Belt w/oregulator Waistbelt & Filter Housing 0 MPV-0 Air Inlet Quick Disconect Stem 00 MPV-0 0 ft. Breathable Air Hose Assembly 00 MPV-0 0 ft. Breathable Air Hose Assembly 9

50 Breathable Air and Respirators millennium 000 Respirators Millennium 000 Respirators Replaceable model size cartridges Medium Yes Small Yes Large Yes Extremely Comfortable, Strong and Durable with Sizes to Fit Most Painters and Technicians NIOSH Approved (TC C-8) Meets OSHA Requirements Caution Not for use with paints that contain isocyanates. Read and follow all printed warnings. A qualified safety expert or hygienist should be used to select the correct respirator. Approved, when used as specified Refer to Part Sheet - model Description Cartridge (/Card, Kit of 0 Cards) Pre-filter (0/Card, Kit of 0 Cards) Cover (Kit of ) Also available: Tune-up Kit 900 (0-98) Description Qty. Cradle Headband Neckstrap right Neckstrap left Inhalation Valve Cartridge Gasket Exhalation Valve Exhalation Valve Cover 0

51 Waterborne Air Dryer Aerodry Paint Dryer 09 Two-Gun Stand Aerodry Paint Dryer Description 09 Two Gun Stand 00 Dryer Gun 00 Dryer Gun Refer to Service Bulletin SB--9 model Description 0 0 Filter, Pack Dryer Gun* 9099 MPV- Female QD Coupler 80 DMG- Knob () 0 0 Brkt () & Knob () Kit 0 0 Arm, Brkt, Knob () Kit *Includes shut-off valve and QD stem. Dryer Gun Air Flow Specifications Inlet PsI Inlet CFm Outlet CFm Maximum inlet pressure 00 PSIG

52 Clean Solutions Devilbiss Dirt Control Floor Coat Features/Benefits Significantly reduces buffing time caused by dirt in paint jobs Reduces airborne particles in a spray booth by trapping them to booth floor Can be used in concrete floor paint booths, ideal for shops spraying waterborne (not for use with painted concrete, tile, or grated floors) Water-based, reduces VOC exposure Helps reduce static in paint booth, preventing paint contamination DeVilbiss Dirt Control Floor Coat Description 809 Dirt Control Floor Coat ( gals.) 809 -gallon Pump Sprayer Devilbiss Bumper Prep Pad Clean, abrade and degrease in one easy step Reduces steps in bumper prep process to increase efficiency Provides comprehensive abrasion for better adhesion DeVilbiss Bumper Prep Pad Description 80 All-In-One Bumper Prep Pad ( per pkg.) Devilbiss Anti-static Wiper Dry wiper reduces paint defects caused by static imbalance Neutral surface eliminates issues caused by dirt and airborne particles, allows for better metallic orientation and flow of clearcoats Use before sealer, base or clearcoats no marring For both waterborne and solvents DeVilbiss Anti-Static Wiper Description 80 Anti-Static Wiper ( per pkg.) DeWipe-Outs Pre-saturated Prep Wipe 8008 Storage case DeWipe-Outs Prep Wipes Description Application 800 8% IPA/%DI Water Most climates 800 0% IPA/0%DI Water Warmer/dryer climates or heated spray booths 808 Acetone blend, California exempt 8008 Storage case w/lid gasket and snap closure VOC compliant California blend Must be used w/8008 storage case " x " each 0 wipes per pouch Reduces buffing "Static Killer" formula reduces static charge and static-related dirt 800 & 800 Resealable pouches 808 VOC compliant

53 Maintenance and Accessories Desiccant snake model 0-B Engine/Part Cleaning Gun Model 00 DS0 Desiccant Snake and Indicator Description Disposable, In-Line 00 DS0 Desiccant Snake Desiccant Air Dryer 00 RHI-0 Humidity Indicator A unique design that combines desiccant drying with built in dirt and oil aerosol filters Effective with both HVLP and Conventional spray equipment 00 PSI maximum 0 F maximum Includes: ' fluid hose Extension Gun for Cleaning Engines and Automotive Equipment Humidity Indicator Refer to Part Sheet: RHI-0 00 (RHI-0) Alerts Painter to Humidity in the Air Line Recommended for use with Desiccant Snake 00 (DS0) l Trigger Kit (-0) Description Qty. Trigger Trigger Shaft E-clip r Nozzle Kit 9008 (-0) Description Qty. 9 Nozzle Lock Nut 0 Outside Nozzle s Air Valve Repair Kit 9008 (-00) Description Qty. Packing Packing Nut Air Valve Assembly 9 Air Valve Spring 0 Air Valve Cap Order model Description Syphon Hose (/ in. I.D.) Hose Clamp for / in. O.D. Hose s Packing s Packing Nut l Trigger l Trigger Shaft l E-clip 8 Outside Tube r9 * * Nozzle Lock Nut r0 * * Outside Nozzle Air Tube Assembly See See Nozzle See See Tube s Air Valve Assembly See See Stem See See Washer See See Valve Disc Retainer 8 See See Valve Disc s9 Air Valve Spring s0 Air Valve Cap Air Connection *Note: To adjust fluid flow, loosen Nozzle Lock Nut (#9), and turn Outside Nozzle (#0)

54 Maintenance and Accessories Whirlwind DIsPOsABLE AIR FILTER DeVilbiss Whirlwind: Longer Life and Less Pressure Drop Patented Two- Stage Filter: Stage - Swirl Chamber: Removes large water droplets Stage - Filter Media: Removes smaller water droplets, oil droplets, and dirt particles All Other Competitive Filters: Water droplets saturate the filter media shortening the life of the filter Smaller inlet surface area increases pressure drop Whirlwind Disposable Air Filter model Description 008 HAF-0 Whirlwind Filter (order qty. ) 009 HAF-0-K Whirlwind Filter pack (order qty. ) Can be used with all HVLP spray guns Cross-section view of filters DeVilbiss Motor Guard Sharpe Viskon- Aire Surface Area (square inches) 0 FILTER ELEMENT INLET SURFACE AREA Larger area = longer life & less pressure drop DeVilbiss has largest surface area DeVilbiss Motor Guard Sharpe Viskon-Aire PSI Pressure Drop (@ 80psi with 0 cfm flow rate) 0 FILTER PRESSURE DROP Lower drop = better flow DeVilbiss has lowest pressure drop DeVilbiss Motor Guard Sharpe Viskon-Aire Energy Needed to Break Filter (inch-pounds) FILTER TOUGHNESS Energy needed to break male thread. More energy = stronger. DeVilbiss bends, but doesn t break DeVilbiss Motor Guard Thread did NOT BREAK Thread broke at 08 in.-lbs. at in.-lbs. input energy i nput energy Sharpe Thread broke at in.-lbs. input energy Viskon-Aire Thread broke at in.-lbs. input energy

55 scrubs HAND CLEANER TOWELs For Automotive Collision Repair Technicians HGs Fluid Regulator 0090 HGS- Maintenance and Accessories 98 Bucket of Scrubs Pre-moistened, Heavy-Duty Towels Easily Remove Soil from Your Hands Portable and convenient. Conditions and softens. Use on tools, equipment and work surfaces. Works fast on dirt, oils, adhesives, lubricants, paints, grease, tar, urethanes, epoxies, inks and dyes, sealants and caulks. AF Filters Exhaust Air Filters Regulates pressure from 0 PSI Gun Fluid Tube 800 JGA- Prevents Fluid Hose from Dragging over Work and Twisted Lines Flame Retardant Booth Paper ⅜" NPS (M) fluid inlet ⅜" NPS (F) swivel fluid outlet ⅜" NPS Thread (pack of filters) High Holding Capacity for All Dry Spray Booths Size: ' x 0' 90 sq. ft. of surface area/8 pleats per foot Average Removal Efficiency: 98.% Highly Absorbent Suitable for floor, walls and equipment covers while spraying Size: 0" x 00' Gravity spray Gun Holders Gravity Gun Holders model Description 8009 GH-0 Mixing Bench Gun Holder Features a sturdy, no tip design for use on paint mixing benches 800 GH- Paint Strainer Holder Attaches to the GH-0 to allow easier pouring and mixing through a paint strainer Wall Mount Gun Holder Protective coating prevents scratches on gravity cups 99 GH-0 & GH-

56 Maintenance and Accessories Gun storage Cases BXX-0 single GuN CAsE 9 BXX-0 TWO-GuN CAsE 80 BXX-8 Single gun case holds: Any full size DeVilbiss gravity spray gun and DeVilbiss cup through Liter size fluid tips DeVilbiss high output gun regulator with gauge gun cleaning kit BXX-8 Store Your Guns and Accessories Fits All Devilbiss Gravity Spray Guns Two-gun case holds: Any full size DeVilbiss gravity spray guns or Any full size DeVilbiss gravity spray gun and a DeVilbiss spot repair gravity spray gun fluid tips DGI digital gauge and DeVilbiss high output gun regulator with gauge gun hooks gun cleaning kit DeVilbiss gravity cups through Liter size CT DEsICCANT CARTRIDGE DRyER 00 DC0 Desiccant Charge (0 lbs.) 00 DC0 Desiccant Charge & TS-0 Tune-up Kit model Description 00 DC0 0lbs. desiccant charge 008 TUK0 TS-0 tune-up kit (0lbs. desiccant charge, humidity indicator, coalescing filter) DAD Desiccant Refill & Tuneup Kits A Well-Maintained DAD-00 Helps Eliminate Paint Defects Desiccant Tune-up Kit model Description 808 DAD DAD DAD- Desiccant refill, st stage filter element, nd stage coalescing filter element Desiccant refill, st stage filter element Desiccant refill Ts-0 Tune-up Kit 008 TUK0 TUK0 Includes: 0 lbs. desiccant charge Humidity indicator Coalescing filter Keep Your TS-0 and Other Desiccant Systems Performing Like New! DC0 TUK0

57 Maintenance and Accessories Fluid strainers Strainers model Application Description 908 KGP--K PLH-MF VS- 99 VS-8-K0 0 PLH-MFC-00 PLH-MF--00 Gravity Cup Fluid Strainer N/A Suction Cup Tube Strainer N/A max. Working Pressure Pressure Gun Fluid Strainer 0 PSI Pressure Gun Fluid Strainer 00 PSI Replacement screen for VS- Replacement screen for PLH-MF--00 Screen-00 Mesh Screen-00 Mesh N/A N/A DeKones Paint strainers Clean. Fast. Efficient. Premium Paint Strainers Patented Design No contamination all gluing and imprinting done on outside No double meshed tip eliminates unstrained paint passing through the tip Fast and strong Nylon Strainers Lint free Consistent mesh sizes for optimum filtration DeKones Premium Paint Strainers Description 80 Nylon Fine, 90 micron, 00/box, (Order qty. 0) 80 Nylon Fine, 90 micron, 0/bag, 000/case 80 Nylon Medium, micron, 00/box, (Order qty. 0) 809 Nylon Medium, micron, 0/bag, 000/case 808 Nylon Superfine, micron, 0/bag, 000/case 80 Nylon Superfine, micron, 00/ctn * KGP--K VS- * Waterborne compatible when using a plastic or disposable cup system. Professional spray Gun Cleaning Kit Gauge Reference Chart 9 Gauge model scale (PsI) Thread size Diameter Port Location GA- 0 ⅛ NPT (M) ½" Bottom GA- 0 0 ⅛ NPT (M) ½" Bottom ¼ NPT (M) " Bottom ¼ NPT (M) " Bottom ¼ NPT (M) " Bottom GA ⅛ NPT (M) ½" Back GA ¼ NPT (M) " Bottom GA- 0 0 ¼ NPT (M) " Back GA- 0 0 ¼ NPT (M) " Top (Inverted) DGI-0. 0 ⅛ NPT (M) ¼" x ¾" Back

58 Maintenance and Accessories Gun Wrenches Gravity spray Gun Cup Lids Gun Wrenches model Description mm and mm wrench, for use with TEKNA spray guns WR-0 Contains all necessary sizes for use with all DeVilbiss guns and many other brands For use with M-G, M-G Clear and Mach HVLP spray guns For use with 00 spray gun (not shown) 80 SPN--K For use with CVi (not shown) Gravity Gun Cup Lids model Description 909 GFC-0-K Disposable Lid Kit for GFC-0 and 0 gravity cups (Kit of ) 90 GFC-0 Lid Assembly Kit for GFC-0 gravity cup Cup Cover Kit for Binks -0 (Kit of ) oz. Cup Lid Assembly (Kit of ) GFC-0-K GFC-0 WR-0 spray Gun Lube Spray Gun Lube Paint strainers Contains no silicone or petroleum distillates Compatible with all paint materials oz. bottle model 800 SSL-0 Description Spray Gun Lube (Order qty.) Paint Strainers model Description White Fine Mesh (00 Micron) Blue Medium Mesh 00 (9 Micron) Red Coarse Mesh 80 ( Micron) Pkg. Qty. 8