The Quick Silver is a low profile Grizzly designed for use where set back is 12" - 24". Quick Silver Low Profile

Transcription

1 starting platforms When ordering new or replacement starting blocks to fit into existing anchors please provide the make, model and setback dimensions of the existing anchors. Grizzly - Slip In/Slip Out by Spectrum The Grizzly is very simple, strong and easy to install. It fits setbacks of 20" to 30" and heights up to 29 1/ 2". Excellent stability, designed to be as rock rigid as many dual post blocks. Fits most deck configurations. Slip anchor requires no wrench to remove. Top size is 23" x 25". FOB Factory Model No Description 1 to Grizzly $ $ Anchor with Cover $ $ Grizzly - Side Step $ $ Quick Silver $ $ Grizzly 6 The Quick Silver is a low profile Grizzly designed for use where set back is 12" - 24". Grizzly - Side Step 18" - 36" Single Post Anchor #21700 Quick Silver Low Profile Growler - Slip In/Slip Out by Spectrum The Growler is a Grizzly with a larger top and can be set back further. The Platform is 25" by 32" single piece with a molded non-slip surface. Top suitable for track style starts. It is easy to install or remove and can be done by one person without tools. Designed for set back of 26" to 36". FOB Factory. Model No Description 1 to Growler $ $ Anchor $ $ Growler Side Step $ $ Record Breaker-Slip In/Slip Out by Spectrum The Record Breaker is a Growler with a stainless steel top, covered with a non-slip material. The top platform is 24" X 32" and the set back range is 18" to 35" Specify side or rear step. FOB Factory. Model No Description 1 to Record Breaker $ $ Anchor $ $ Toll Free Line: Fax: Phone:

2 6 Bighorn Dual Post - Standard & Long Reach by Spectrum The Dual Post provides good stability yet can be quickly and easily removed from special anchoring sleeves. Unit comes standard with a 10 0 tilt. Available up to 29 1/ 2" heights supplied with consecutive numbers. Step tread is moulded non-skid HDPE. Tops are 23" x 25". The Bighorn Dual Post set back is 20" to 30" and the Long Reach Bighorn Dual Post (pictured right) set back is 20" to 40" from the pool wall. It is ideal for wide gutters and deck level overflow trenches. FOB Factory. Anchors sold separately. Model No Description 1 to Bighorn Dual Post $ $ Long Reach Bighorn Dual Post $ $ Anchor 6" with caps $ $ Cougar Rear or SideStep by Spectrum This is the ultimate fast pool platform. This 25" x 32" platform top allows for staggered foot positions and a 30" - 40" setback range allows for wide gutter and parapet designs. Side access step conserves deck space. Designed for use with anchor setbacks of 18" - 22". Anchors sold separately. FOB Factory. Model No Description 1 to Cougar Rear Step $ $ Cougar Side Step $ $ Anchor 6" with caps $ $ Dual Post Anchor Set Xcellerator (Single Post) with Track Start Footrest by Spectrum This is a one piece, all stainless steel, single post, drop in, starting platform. It comes as side step only, and the Trackstart Footrest and handrails are included. The non-skid finish is by 3M. The top platform is 32 L X 24 W. Set back range this block can accommodate is from 18 to 35. Custom made to each pools deck to water height and setback requirements. Note: single post anchor sold separately. FOB Factory. Model No. Description price Xcellerator Starting Platform $ $ Anchor $ $ Xcellerator Fusion (Single Post) with CTS Timing Accessories by Spectrum This is an Xcellerator Starting Platform with built in Colorado Timing Systems Relay Judging Platform with Speedlights, Connection Plate and Speaker. All the plug-ins for swim meet set up are in place. Other details about the block remain the same. FOB Factory. Model No. Description price Fusion Starting Platform $ $ Anchor $ $ Fusion Starting block tops now come in a variety of vibrant colours. Standard colour is white. Specify colour when ordering. Blue red Forest Green Black yellow Fusion CP Powder Coated Stainless Steel is available as an Optional Extra on most of the Starting Blocks, Lifeguard Chairs, Dive Stands, and Rail Goods, that we sell. A wide range of colours is available. Please ask for a quotation if you are interested Phone: Fax: Toll Free Line:

3 6 Starting Block Cart by Spectrum Spectrum makes a cart for moving Starting Platforms and storing them on. With the new drop in anchors this makes the job of moving blocks on and off the deck easy. Custom made to accommodate the different styles of blocks. Please enquire with the model of your blocks for a quote. Starting Block Covers for Spectrum Blocks FOB Factory Item No. Description price Hard Starting Block Covers $ $ Soft Starting Block Covers $ $ When ordered separately from blocks model and top size must accompany order. guard chairs Marshall & Discovery Guard Chairs by Spectrum This movable chair is ideal for coaches, instructors, judges and guards who need to relocate their point of observation from time to time. It is lightweight, stable and affordable. The rear support legs are bent forward as arm supports for added comfort. The rails are 304 stainless steel with 1.9OD x.065" wall thickness. Unit includes deluxe fibreglass seat and rubber inserts. Ballast is optional and generally only required for application where high winds are common. FOB Factory ' portable chair $ ' portable chair $ /45 Marshall Discovery Ballast $ ' Discovery $ ' Discovery- 1.9 $ MARSHALL CHAIR DISCOVERY CHAIR Vista Moveable Lifeguard Chair by SR Smith This is an all stainless steel guard chair and is available in two heights, measured at the seat. 6 and 8 feet. It comes with two rear wheels, two rubber pads in front plastic ladder treads, an acrylic platform with a non-skid finish, an umbrella holder and the seat is on a swivel. It ships knocked down to save on freight, some assembly required. FOB Factory Model No. Description price US Vista Moveable $ US Vista Moveable $ Toll Free Line: Fax: Phone:

4 6 Sapphire Anchor Sapphire Guard Chair by Spectrum This affordable yet sleek style provides the sloped look with vertical rear entry. The space saving design enables minimal set back yet is ideal for roll-out gutters. Standard features include 6' seat height, deluxe fibreglass swivel seat, solid stainless steel construction (no cheap carbon steel support columns), non-skid platform, umbrella holder and ring buoy holder. FOB Factory Sapphire Chair -1.9 $ Anchor Kit $ Hyalite Anchor Hyalite & Stimson Guard Chairs by Spectrum This unique chair has been designed to comfort to OSHA regulations. All guard rails are a specific height and forward distance from the platform. The feeling of user security is immediately felt when sitting in the deluxe swivel seat. Features include rear entry ladder, 6' seat height, solid stainless steel construction (no cheap carbon steel support columns), anchors, non-skid platform, umbrella and ring buoy holder. FOB Factory Hyalite Chair $ Anchor Kit $ Stimson Chair - 5' Seat Height $ Hyalite STIMSON Torrey II Guard Chair by Spectrum The Torrey II Guard Chair is light and readily Moveable. The platform is 34" x 34" and it comes with 2 wheels and a swivel seat. Three seat heights are available. FOB Factory Torrey ll Chair - 36" $ Torrey II Chair - 42" $ Torrey II Chair - 48" $ Mendota Side Step Mendota Portable Lifeguard Chairs by Spectrum Made of plastic wood (high density polyethylene) Mendota portable lifeguard chairs are made of plastic wood and come in two colours, white or sand. The chairs are available in three seat heights, 3, 4 and 5'. They are shipped partially knocked down so some assembly is required. They are screwed together with stainless steel hardware. Plastic wood is heavy and impervious to almost everything making it ideal for outdoor applications. FOB Factory Mendota Chair $ Mendota Chair $ " Mendota Chair $ " Side Step Mendota Chair $ Mendota ballast $ Phone: Fax: Toll Free Line:

5 Lifeguard Platforms by Spectrum These platforms are ideal for waterfronts or large deck areas, and are large enough to have two or more guards on the platform at the same time. On the Hilgard the platform is 34" wide by 63" long, and the seat height is 58". The platform weighs 250 pounds and has access ladders at each end. The Observation Station is 58" wide by 62" long and the seat height is 42". The station weighs 185 pounds and has two wheels for portability. Both units come with non-marking pads for deck use, and mounting brackets for a rescue buoy and umbrella. These are shipped knocked down and some assembly is required. FOB Factory Hilgard $ Observation Station $ Hilgard 6 Lifeguard Chairs by Tailwinds These are recycled plastic wood Lifeguard Chairs with SS fasteners suitable for indoor or outdoor applications. These are shipped knocked down and some assembly required to economize on freight and available in 4 colours. FOB Factory. LG 500 Lifeguard Chair, seat height is 30 $ EXP 501 Platform Kit for LG 500 $ LG 505 Lifeguard Chair, seat height 30 $ LG 510 Lifeguard Chair, seat height 40 $1, BCWH 563 Wheel Kit, universal $ ANCH 502 Anchoring Kit for LG 500 & 505 $ Observation Station tailwinds bcwh 563 tailwinds Exp 501 platform kit tailwinds 5001 tailwinds 5051 tailwinds 5101 Moveable Lifeguard Chair, O-Series by SR Smith This is an open concept of Lifeguard Chair, with a stainless steel tube frame, acrylic, nonskid steps, topped by a seat mounted on a swivel. It comes in two heights, measured at the seat, of either 30 or 42. Both have a footprint on the deck of approximetaly 42 in diameter. Two wheels are included to make moving easy. Shipped knocked down to save on freight, some assembly required. FOB Factory. LGC O-Series Moveable $ LGC O-Series Moveable $ tailwinds lg50d chair shown with anchoring kit O-Series Tall O-Series Short Toll Free Line: Fax: Phone:

6 6 Diving Stands Cheyenne Dive Stands by Spectrum These are all stainless steel (304L) stands, custom made for each application. Stands can be 1/2, 2/3, 3/4, 1 or 3 meters in height, rear or side mount and accommodate 10 to 16 diving boards, (not included, by others). Typical features would include double guard rails on both sides, (1.9 OD X.065 walls) flanged columns, foot adjustable fulcrum and hinged diving board mounts. 1.5 OD handrails or heavier gauge tubing are common options. FOB Factory Model No. Description price Meter Stand, rear ladder $14, Anchor kit for above $ Meter Stand, side ladder $14, Anchor kit for above $ Meter Stand, rear ladder $POR Anchor kit for rear ladder $POR Meter Stand, side ladder $POR Anchor kit for side ladder $POR Recreational Diving Boards by SR Smith Recreational Diving Boards are wood core, covered with a white acrylic shell and have a non-skid finish. Typically they are far less bouncy than aluminum diving boards. They come in 14 and 16 lengths with the same 5/8 bolt holes on 12 centres just like the aluminum boards. The user weight limit is 250 pounds and the boards weigh 200 and 230 pounds respectively. It is important that these boards be stored inside (dry and above freezing) for the winter. A good alternative where there is no competitive diving. FOB Factory Model No. Description price Swim Club Commercial-white $ Swim Club Commercial-white $ Note: Diving boards are sold separately from stands & are not included in stand prices Phone: Fax: Toll Free Line:

7 Durafirm Short Stands Durafirm short stands are designed for installation on concrete platforms typically built at the pool by your contractor. The short stand is suitable for one meter or three meter platforms. Railing configuration will depend on railings built on the platform. Short stands can be supplied with no railings, railing one side only or both sides as required for your application. Fulcrum units identical to the one and three meter stands and they use a six-point anchor pattern. Anchors included. FOB Factory Short Stand - 2 rails, 2 sides $10, Short Stand, no rails $ Durafirm Diving Stands Durafirm stands are fabricated from cast aluminium (frame) and stainless steel (railings); both materials stand up to institutional use very well. The most important single feature of Durafirm stands is the simple 8-point deck anchorage, which requires no special footings and can be installed on an existing deck, if concrete is of good quality and no less than 4½ thick. This is the easiest stand to install in a retrofit situation on an existing deck. Both one and three meter stands have hinged board anchors which allow easy tilting of the board up to 180 to clear the pool edge during other activities such as swim meets and water polo matches. All stands are supplied with double guardrails. Durafirm stands are manufactured in different heights to accommodate pools with deck to water level dimensions from 1" to 13". Deck to water level dimension of the pool must be indicated when ordering. FOB Factory Meter Stand * $13, meter Stand * $26, * Includes anchors. 6 Note: Diving boards are sold separately from stands & are not included in stand prices. duraflex Diving Boards Duraflex s family of diving boards is the acknowledged standard for use in public facilities. From general recreational use to very highlevel competition, they are the best choice for public pools. Duraflex Board The standard Duraflex board tapers from tip to fulcrum and then maintains the thicker section from fulcrum to butt. This construction yields less spring than the higher competition boards but more long lasting. This is the board recommended for general recreation use. FOB Factory Duraflex 14' A = 63 1/ 4" $ Duraflex 16' A = 78" $ Maxi-Flex B The Maxi-Flex Model B is a double tapered aluminium board for maximum spring. In addition there are approximately 200 perforations measuring approximately 1½" long and ¼" wide, extending 25" back from the tip end of the board. This feature results in an even more lively board, making it the choice of divers worldwide. For applications where dive club needs are the primary concern, the MAXI B is recommended. FOB Factory Maxi-Flex B 16' A = 73" $ Toll Free Line: Fax: Phone:

8 STAINLESS STEEL Dive stand Parts Durafirm Fulcrum Assembly SF533 Roller clamp lock nut c/w stud $ Roller clamp $ Roller bearing $ S Roller S-short with foot wheel $ L Roller L-long with foot wheel $ Anti rattle bolt c/w nut $ Tie plate $ Roller block assembly $ Slide bearing $ Tie plate bolts c/w nuts $ Rubber bumper $ Anti rattle clamp $18.25 C208A Track (A-1¼") $85.35 Miscellaneous Parts MP 112 Vinyl channel kit 30" 8 channels w/glue kit $ C207 Rail clamp $17.99 C207B Rail clamp bolt specify length ½, 5/8, ¾ or 7/8 $1.75 Durafirm Hinge Assembly SF122 5/8" x 3½" Stainless Steel Bolt c/w nut / pr $47.25 C202A Hinge (Male) $81.65 C209 Nyliner $3.85 C202B Hinge (Female) $93.95 C203 Hinge Pin $18.35 C210 O-ring $3.85 C202 Hinge assembly $ SF106 Aluminium hinge mounting bolt $4.95 NOTE: All Durafirm stand parts are available (railings, fulcrum box, legs, ladder, steps, etc.) as replacement parts. If parts you require are not listed, please inquire. Diving Board Resurface Kit Made by Kelly Technical this kit is suitable for all aluminum boards. It is exactly enough material to coat top & edges of one 16' board; it is supplied with roller and complete instructions. Available in white, blue or turquoise Diving board resurface kit - turquoise $ Phone: Fax: Toll Free Line:

9 Commercial ladders Standard 25" Frame Ladders These are commercial pool grade ladders that will stand up to heavy-duty use. Ladder frames are fabricated of 1.90" O.D. x.065" wall, 304 stainless steel tube with mirror finish. Upper ends of ladder frames are fixed to the pool deck with 2 anchor sockets on 20" centers. In stock set backs from wall of pool are 25, 27", 30, 36 and custom set backs are available if necessary to match your existing anchor locations. Our ladders include unbreakable HDPE treads with a permanent non-skid surface built in. For specific applications where heavily used ladders require extra durability upgrade to a heavy-wall ladder. A tubing wall of.109 or.145 will stand up to the most demanding applications. Note: Anchor sockets for deck and escutcheon trim pieces are not included in ladder pricing please order separately. See below. FOB Factory Model No Description - 1.9" OD, wall Price step 25" ladder- Cross braced $ step 25" ladder-cross braced $ step 25" ladder-cross braced $ step 25" ladder-cross braced $ Call for pricing on other model or custom ladders. 6 Grab Rails by Spectrum Grab Rails are deck mounted, 304L grade stainless steel handrails for use when the pool steps are embedded in the pool wall. In wall steps and removable Grab Rails are most commonly used in pools with bulkheads. These Handrails are normally sold in pairs, and come in 4 standard configurations to suit almost any deck style. Handrails can be 1.9 OD or 1.5 OD, and wall thickness can vary depending on the rigidity required. With the different designs and different setbacks almost any deck can be accommodated. Custom designs available. The four standard styles are shown below. Price on Request. Spectrum Pike Grab Rail Spectrum Cisco Grab Rail Handrails, for Stairs, by Spectrum Handrails are normally used on stairs down into shallow pools like Hot Tubs or Teach pools. They can be used on either side, or one in the centre. They are all 304L SS and can be 1.9 OD, or 1.5 OD, with wall thickness varying depending on rigidity required. All four styles are available in 48 and 60 lengths, and the 2 and 3 Bend models also come in 72 lengths. Custom dimensions are also available. The four standard styles are shown below. Price on Request. Spectrum Burbot Grab Rail Spectrum Coho Grab Rail Spectrum 2 Bend Hand Rail Spectrum 3 Bend Hand Rail Gibraltar style Grab Bars Commercial grade hand bars that are inexpensive. This style of grab bar was installed in many pools in the 60 s through the 80 s. They are still available to replace old bars or for new installations. CRH-100 B Gibraltar Style Grab bars (pair) $ c/w anchors and escutcheons Spectrum Kokanee Hand Rail Spectrum Varden Hand Rail Toll Free Line: Fax: Phone:

10 6 SWIMQUIP 22" 15 0 LT20S LT19S LT19A ladder parts and accessories Treads LT 20S Jacuzzi 20" white vertical ladder tread $35.00 S SwimQuip 22" 15 white ladder tread $ LT 19S KDI 19" vertical plastic tread $62.50 LT 19A KDI 19" 15 sloping plastic tread $62.50 #44107 KDI 26" vertical plastic tread $ #44109 KDI 26" 15 sloping plastic tread $ Contour head ladder bolt (c/w bolt, washer & nut) $9.25 5/16"x2 1/2" Spectrum Ladder Treads Spectrum 26" Sloping Tread 1.9" $ Spectrum 22" Sloping Tread 1.9" $ Spectrum Deluxe Vertical Tread for 1.9" $ Spectrum 20 Vertical Ladder Tread $ Fits ladders with 1.9 or 1.5 D rails on 20 centres. 4 wide. Can be used instead of a Jacuzzi Ladder Tread. Recessed Steps This totally recessed step provides a flush wall when mounted. Choose from heavy duty injection moulded plastic with non-skid surface or slip resistant, solid stainless steel recessed step is fabricated from 12 ga. 304 stainless steel with an all welded design. Moulded plastic step is white but can be painted any colour to match your decor. Stainless steel steps are electropolished to near mirror finish. Finished opening size: 5" x 15 1/2" Recessed Plastic Step $ Recessed SS Step $ Standard Wedge Anchor & Escutcheon Gibralter Parts Ladder Anchors AS-200B Bronze 4" Anchor Socket 1.5" OD $54.15 PS-4019-BC Bronze 4" anchor socket 1.9" $39.00 PE-0019-S SS Escutcheons for 1.9 tubing $ SS Escutcheon for 1.5 tubing $ A Gibralter retro wedge kit $79.15 (Escutcheon not included) Gibralter plastic escutcheon $38.35 NOTE: Old style Gibralter wedges and escutcheons are no longer available Composite Compression anchor (1.5 inch) $ Compression anchor wrench $ Stainless Wedge Anchor (1.5 inch) $ Rubber Ladder Bumpers Generic white rubber ladder bumpers for 1.9" O.D. tubing $9.35 Composite 1.5 Compression Anchor 1.5 Wedge Anchor rubber ladder bumpers 82 Phone: Fax: Toll Free Line:

11 Stanchion Posts and Anchors Stanchion post anchor w/cap (Bronze) $ Stanchion post 4' 6" 1.9 X.065 $ Stanchion post 8' 1.9 X.065 $ Optional sliding collar eyebolt $ SS Stanchion Post Anchor c/w cap $ Replacement Cover & Key for $ Stanchion Post Anchor Cover & Key Jacuzzi Wedges for Jacuzzi Ladder Anchors The old style Jacuzzi Ladder Anchor is no longer available, but because there are so many in use the wedge, (the part that gets lost) is still available. It was the biggest, most effective wedge, and will only fit in the Jacuzzi Anchor Jacuzzi Ladder Anchor Wedge $32.50 Stanchion Post Jacuzzi Ladder Anchor Wedge Crowd Control Stanchion Posts These are 3 tall and 1.90 OD by.065 wall 304 stainless steel stanchion posts with either two or four eyebolts for rope. Anchors are standard stanchion post anchors. FOB Factory Model No. Description price ST Stanchion w/2 eyes $ ST Stanchion w/4 eyes $ Bleachers, Aquatic, Tip & Roll by National Recreation System Inc. These are anodized aluminum bleachers for durability in pool environments, and being aluminum are light weight, and designed to be tilted backwards onto wheels and wheeled away for storage. These bleachers have 2 X 10 seat and floor planks, and floor planks can be one or two wide, depending on space. 2, & 3 row models are available, in 9, 12, 15, 21 and 24 lengths, and 4 row models come in 12' or 15 lengths. When in use the bleachers sit on non-marring rubber foot pads and for transport tip back onto non-marring wheels. The pictures below show a two row bleacher with single foot plank and a three row bleacher with double foot planks. Spec sheets available if you need to know if they will fit in your space. Price on request. Tip & Roll Bleacher 4 Row Single Footboard Tip & Roll Bleacher 3 Row Single Footboard Tip & Roll Bleacher being moved Toll Free Line: Fax: Phone:

12 6 Adironrack Chair (C01) with 32' Round Table Top (TT01) and Cocktail legs (TB01) C.R. Plastics Furniture The Generation Line is manufactured from recycled plastic; it is for both outdoor and indoor use and built to last and made in Canada. Features 5 year limited warranty Heavy 7/8 gauge plastic lumber Never needs painting All stainless steel hardware No slivers No rot Maintenance free Chairs Model Description size weight Price C01 Adirondack H. 40.5, W. 31, D lbs $ C08 Kids Adirondack H. 27, W.20, D lbs $ C03 Adirondack Upright H.44, W.31, D lbs $ Available Colours: Red, White, Blue, Yellow, Grey, Green, Beige, Cedar, Mint Green, Fuschia, Aqua, Shy Blue, Orange, Black, Lime Green, & Chocolate Table Tops Model Description size weight Price TT01 RoundTop 32 Diameter 37 lbs $ TT02 Round Top 37 Diameter 45 lbs $ Table Top (TT01) with Cocktail Pesestal Legs (TB12) Table Legs Model Description size weight Price TB01 Cocktail Legs H.17, W.23, D lbs $89.99 TB12 Dining Pedestal Base H.29, W. 25, D lbs $ Picnic Tables Model Description size weight Price T50 Picnic Table Color Frame H.29, W.77, D lbs $1, T51 Picnic Table black Frame H.29, W. 77, D lbs. $1, All products are delivered unassembled, prices are FOB Factory. Picnic Table (T50) 84 Phone: Fax: Toll Free Line:

13 plastic benches These plastic benches are made from recycled plastic that has been made into plastic lumber. The benches are similar to their wooden look alikes, but are impervious to almost everything, especially pool chemicals, and never need painting. They come partially knocked down, some assembly required, and all fasteners are stainless steel. Only two colours, grey or light brown are available. Custom lengths are also available, and will be priced the same as the next larger regular size. FOB Factory. Item # Description colour Length price Wall Mount Bench Sand 2 $ Wall Mount Bench Sand 3 $ Wall Mount bench Sand 4 $ Wall Mount Bench Sand 5 $ Wall Mount Bench Sand 6 $ Wall Mount Bench Sand 7 $ Wall Mount Bench Sand 8 $ Wall Mount Bench Sand 9 $ Wall Mount Bench Sand 10 $ Wall Mount Bench Sand 11 $ Wall Mount Bench Sand 12 $ * Change 3 to 0 for colour gray Plasti Bench Sand 5' $ Plastic Bench Sand 6 $ Plastic Bench Sand 7 $ Plastic Bench Sand 8 $ Plastic Bench Sand 9 $ Plastic Bench Sand 10 $ Plastic Bench Sand 11 $ Plastic Bench Sand 12 $ * No gray plastic benches available Wide Plastic Bench Sand 2 $ Wide Plastic Bench Sand 3 $ Wide Plastic Bench Sand 4 $ Wide Plastic Bench Sand 5 $ Wide Plastic Bench Sand 6 $ Wide Plastic Bench Sand 7 $ Wide Plastic Bench Sand 8 $ Wide Plastic Bench Sand 9 $ Wide Plastic Bench Sand 10 $ Wide Plastic Bench Sand 11 $ Wide Plastic Bench Sand 12 $ * Change 5 to 2 for colour gray Plastic Bench w/backrest Sand 6 $ Plastic Bench w/backrest Gray 6 $ Wall Mount Bench Plastic Bench Wide Plastic Bench Plastic Bench with Backrest 6 Hide-away Bench This bench is designed to be placed along a wall and provide storage and seating. It is 8 long 16 wide and 17 high. It is made of high-density plastic with an anodized aluminum frame for strength, pneumatic lid supports and rubber feet. Shipped knocked down, some assembly required. FOB Factory Hide-away Bench $ /2" 32 1/2" 16 1/2" Toll Free Line: Fax: Phone:

14 6 Commercial Pool slides Tot Slide by Aquam This small slide is designed to be portable, and used by small children with adult supervision. There are no provisions for any mounting hardware to fasten it in place. Ideally it is used at a beachfront or zero depth pool. One colour only, light blue, as pictured, and one piece so easily moved by 2 people. It is made of fiberglass with a smooth gelcoat finish, and has plastic trim around the bottom edge to protect the fiberglass from concrete and tile abrasion. FOB Factory. ER Tot Slide, Blue $ SR Smith Slides comply with the US CPSC Safety Standards for Swimming Pool Slides (16 CFR 1207) Cyclone Slide by SR Smith The Cyclone Slide by SR Smith is made from rotomolded polyethylene and comes in three colors: Sandstone, Taupe and Gray Granite. It is 41 tall at the top of the handrails, takes up about 7 of deck space parallel to the pool edge and extends back from the pool edge about 5 ½. Available in right curve only. Required water depth is 42. The stairs are totally enclosed, a water delivery system is included and the slide is rated for 175 pounds. Some assembly and anchoring to the deck required. FOB Factory Cyclone Slide - Taupe/Sandstone/Granite $ Typhoon Slide by SR Smith The Typhoon Slide by SR Smith is a rotomolded polyethylene slide. It is available in two colours, Sandstone and Gray Granite. Right and left curves are both available. Height at the top of the handrails is 7 4. The footprint on deck is a rectangle, 4 back from the pool edge and 11 8 parallel to the pool edge. The weight limit is 275 pounds, and the recommended minimum water depth is 4 6. A water delivery system is included. Assembly and anchoring will be required. More dimensional information and installation instructions available on request. FOB Factory Typhoon Slide - Right Left- Sandstone/Grey Granite $ Turbo Twister Slide by SR Smith The Turbo Twister Slide by SR Smith is a rotomolded polyethylene slide. It is available in two colours, Sandstone and Gray Granite. Right and left curves are both available. Height at the top of the handrails is 8 7. The footprint on deck is a rectangle, 6 8 back from the pool edge and 13 6 parallel to the pool edge. The weight limit is 275 pounds, and the recommended minimum water depth is 4 6. A water delivery system is included. Assembly and anchoring will be required. More dimensional information and installation instructions available on request. FOB Factory Turbo Twister Slide - Right /Left - Sandston/Grey Granite $ Note: Due to variations in local codes, obtain approvals before ordering and installing slide Phone: Fax: Toll Free Line:

15 pool slides by Spectrum Ultimate Slide 8-8 Flume Options: Flume Length: Tower Height: Minimum Water Depth: Flow Rate: 5 gpm 1 or 2 Flumes 40 Linear Feet 8 Feet 4 Feet Item No Description Price Ultimate Slide 8-8 (Double flume) $41, Ultimate Slide 8-8 (Singleflume-left) $40, Ultimate Slide 8-8 (Singleflume-right) $40, Pool Slide 4-8 Flume Option: Flume Length: Minimum Water Depth: FlowRate: 5 gpm 1, 2 or 3 flumes 10 Linear Feet 8 Feet Item No Description Price Single Flume, Right (Rear stair) $26, Single Flume, Centre (Rear stair) $26, Single Flume, Left (Rear stair) $26, Single Flume, Straight (Right hand stairs) $26, Single Flume, Angle (Left hand stairs) $26, Single Flume, Straight (Left hand stairs) $26, Single Flume, Angle (Left hand stairs) $26, Double Flume (Right hand stairs) $29, Double Flume (Left hand stairs) $29, Double Flume, Slides on Right & Centre (Rear stairs) $29, Double Flume, Slides on Left & Centre (Rear stairs) $29, Double Flume, Slides on Right & Left (Rear stairs) $29, Triple Flume, Slides (Rear stairs) $29, Note: Due to variations in local codes, obtain approvals before ordering and installing slide. Toll Free Line: Fax: Phone:

16 6 Vortex Slide by SR Smith The Vortex Slide is a custom product, available in 4 configurations. It can have a Ladder or Stairs, and Open or Closed Flumes. The flumes are rotomolded polyethylene mounted on a powder coated steel frame. It is available in 2 colors, Blue and Gray Granite. Overall height is 10 7 and the runway is 19 long. The footprint on deck or the slide with ladder is a rectangle, 9 back from the pool edge and 9 parallel to the pool edge. For the slide with stairs it is 9 by The weight limit is 325 pounds, and the recommended minimum water depth is 4 6. A water delivery system is included. Assembly and anchoring will be required. More dimensional information and installation instructions available on request. FOB factory Vortex, half tube with ladder $19, Vortex, full tube with ladder $21, Vortex, half tube with stairs $27, Vortex, full tube with stairs $29, SR Smith Slides comply with the US CPSC Safety Standards for Swimming Pool Slides (16CFR 1207) Storage Equipment, Deck Stor-A-Way Outside dimensions are 33 wide by 31 deep by 74 high. All fiberglass, ABS plastic, nylon and stainless steel construction. Single full height locking door. Drain holes in shelves and base. Ventilated. Sling pouches in door for small items. Trolley and castors included. FOB Factory Pool Deck Stor-A-Way $ st24-4 st24-6 Deck Storage Bins by Tailwinds These are made of recycled plastic wood, with SS fasteners and suitable for indoors or outdoors. They are lockable, and move easily with castors, and handles. The gas springs make opening the lids effortless, and the optional stainless steel castors are perfect for pool environments. These are shipped knocked down and some assembly required to economize on freight. Available in 4 colours. FOB Factory. ST24-4 Storage Box, 48 L x 24 W x 28.5 H & 180lbs $1, ST24-6 Storage Box, 72 L x 24 W x 28.5 H & 250lbs $2, ST UP-4 Upgrade ST24-4 to Stainless Steel Casters $ ST UP-6 Upgrade ST24-6 to Stainless Steel Casters $ tailwinds colour samples 88 Phone: Fax: Toll Free Line:

17 Pool Cover systems Pool Blankets Covers save money by eliminating heat loss from evaporation. A well designed cover system that is easy to install and remove will pay for itself in a short time, especially in outdoor applications where temperatures differences between water and air is larger than indoors, and other technologies (Heatsaver or Heat Exchangers) do not work. All of these covers are custom made to dimensions provided to ensure a proper fit. Covers come with 4" edging and 5 grommets evenly spaced along the short edges (on standard sized blankets, otherwise as required or requested) and 1" edging on the long edges. Lead straps are used to attach the cover to the roller, are normally 5' or 18" long, come with screws to attach them to the roller tube and the cover end of this strap slips over the Loop Tie which is provided with the blanket. To connect two blankets together to roll up the second section the Loop Ties just slip together so you can continue rolling the second blanket on top of the first. The Thermal-King Blanket material is the best in the business, and the fabrication, edging, grommets and reinforcements results in the most durable blanket, supported with a 2 year limited warranty. Swirl Pool Covers: Covers used on hot tubs overnight provide significant heat savings by preventing evaporation. The higher water temperatures and chlorine levels cause significantly shorter cover life. The most practical alternative is to use a Bubble style home pool cover, which is mass produced in a range of standard sizes. Normally you would purchase the closest size that would create 1 or 2 covers with as little waste as possible and the cover would be trimmed with on site with a razor knife. Call with your Hot tub dimensions for a quote. Pricing is FOB Factory Item no Description price Thermal-King Custom Blanket $POR " Lead strap $ ' Lead Strap $ Loop Ties $49.50 Commercial Blanket Rollers Choose from several roller solutions that together offer a roller for virtually any application. All rollers FOB Factory. Stainless Steel Roller Deluxe: Capacity for 164, 328, 492 feet on single, double or triple all stainless roller. Stainless Wall Mount Roller: Designed to support up to 50 meters of wet blanket on the wall, off deck & out of the way. Use one unit for each section of blanket. Crank extension allows unit to be mounted over 6 feet where required. Motorized Wall Mount Roller: Considered semi automatic, a hand held transmitter controls motor to provide smooth deployment and retrieval of blanket while guided by one staff member. Both faster and easier, this system pays for itself by minimizing staff time required to install and remove blankets each day. Typical 25-meter pool would use two units removing blankets of up to 25 feet wide Stainless Double Roller (specify blanket width to 18') $POR Wall Mount (specify blanket width to 21') $POR Motorized Wall mount (specify blanket width to 21') $POR Heatsavr TM - The Original Liquid Pool Cover Heatsavr is a biodegradable liquid pool cover that prevents heat loss by forming an invisible layer on the pool surface preventing evaporation. Application is simply applying 1 ounce of Heatsavr per 400 square feet of surface area once daily. The recommended dosage for hot tubs is one once per 50 square feet of surface area per day. The product will not affect pool chemistry, controller probes, or mechanical equipment. It will even work while people are in the pool, just less efficiently. Indoors both heat loss and humidity will be reduced. The only time it does not work is in windy outdoor locations. In these circumstances the old fashioned pool blankets are still used. Application of the product can be automated with the Automatic Metering System which is listed as an accessory. Sold in case lots of 4 bottles of 140 ounces each per case. HSVR Heatsavr 4 x 1 Gal / case $235.50/case HSVRMP Automatic Metering System c/w 25' of tubing $ Hemmed Edge Stainless Triple 6 Toll Free Line: Fax: Phone:

18 6 Automatic Pool Cover Systems by Spectrum/Alta Custom Pool Covers and Pool Cover Reel Systems are the specialty of the Alta division of Spectrum Aquatics. Most facilities can now get an automatic pool cover system with push button controllers. The pool covers are typically stored on wall mounted rollers. The wireless controlled deployment system unrolls the covers and pulls them across the pool to put them on. The system also pulls them off and rolls them up at the push of a button, covers now take 2 minutes to put on and off by one person. Custom items ideal for new pools or retrofits, but requires structural walls to support the weight. Please enquire for more information, as these are done one at a time in consultation with engineering. For outdoor pools consider the power winder upgrade to the traditional cover reel. The pictures below illustrate the concepts. POWER WINDER DEPLOYED COVER CONCEPT DIAGRAM 90 Phone: Fax: Toll Free Line:

19 clocks Pool Clock 13 1/ 2" round case with high-impact, shatterproof acrylic lens. Moulded high-impact ABS case. Requires 1 AA battery, not included clock $ Large Pool Clock 36" diameter with 3" numbers. Wall mount and plug-in 110 volt only O Sanio Pool Clock - Wall Mount $ scales Balance Beam Scale A good scale for weight rooms and workout areas. It has a large stable cast aluminium base and the 11 by 14 platform is covered with a non-skid rubber matting. It reads 0-200KG or lbs. The height bar reads to 200 CM or Balance Beam Scale $ Sauna Equipment Sauna Heaters Homecraft rugged floor mount heaters are made of stainless steel and are CSA certified. These heaters are designed with a free flow circulation system for quick preheating and fast recovery. Igneous sauna rocks and instructions are included with each heater. Dimensions for the floor mount FHSH series commercial heater are 20 by 20 by 32 in height. Commercial Floor Mount Heater FHSH 15 Sauna Heaters (controls not included) HSH9 wall mount for Item No. KW Volts Phase Amps Description sauna Size price KW Wall Mount #HSH to 450 (cu. ft.) $ KW Floor Mount #FHSH to 700 (cu. ft.) $ KW Floor Mount #FHSH to 900 (cu. ft.) $ replacement Heater elements: KW Homecraft replacement element (208, 3 phase) $ KW Homecraft replacement element (208, 3 phase) $ KW Homecraft replacement element (208, 3 phase) $ High limit Switch (fits all models) $85.35 NOTE: Bent or flat elements are actually the same. For shipping purposes "Bent" elements may be shipped as "Flat" elements. Simply place a flat element on a table edge and bend to angle required. Toll Free Line: Fax: Phone:

20 6 "the ultimate" by Saunacore The Ultimate is a well-built sauna heater that provides an option for larger commercial saunas requiring more heat. Fabricated 100% from 304-grade stainless steel, the Ultimate is built to last at an aquatic center. The elements are industrial quality; low-density silver soldered. The Ultimate is floor mounted and measures 21 W X 21 D X 34 H. 30# of sauna rocks are included. These are high output heaters and a successful installation requires two extra considerations. Both fresh air supply to the heater and internal re-circulation of air within sauna are required for best results with an Ultimate heater. We can help with information on both requirements. Standard voltage is 208, 3 phase but is available at higher voltages to 600 volts (at extra charge). Heaters come complete with a mechanical wall mount control consisting of thermostat with 12 foot capillary, 60 minute timer, pilot light, contactor and enclosure. FOB Factory. Item No KW Model # Description Sauna Size ( Max ) Price ULTC6 Floor Mount 750 cu. ft. $ ULTC6 Floor Mount 825 cu. ft. $ Replacement Elements. Please specify KW and Voltage Low-density replacement element KW & Voltage $ TK-24 digital sauna control Sauna Door Kit home craft parts & accessories Sauna Controls Homecraft sauna controls feature a digital 24/7 control with 5 year battery back up TK 24-D Commercial Sauna Control $ Sauna Accessories & Maintenance Supplies Inch Sauna Thermometer $29.25 (no glass with bimetal spring) Sauna Rocks - 25 lbs. $ Aluminium Foil Vapour Barrier - 4 wide by 68 long $ Clear Sauna Sealant (1 US gallon); formulated $62.50 for high temp, high humidity conditions use on benches doors etc. Water based Sauna Light Fixture Vapour Proof - round or oval $ Sauna Light Replacement Globe - round or oval $ Sauna Light Gasket - round or oval $ Sauna Door: insulated, cedar both sides; $ pre-hung on 1 by 6 cedar frame, all door hardware pre-mounted standard size rough-in 26 inch by 78 inch (custom sizes available) Door as above with 12 by 44 inch vertical $ thermal view glass Thermometer Light 92 Phone: Fax: Toll Free Line:

21 floor matting Herontile High quality, very comfortable, snap together 13 (33cm) squares of PVC tile. These are non-slip tiles that securely snap together, but can be cut to accommodate edges and corners. They are 15mm high and underneath are open in both directions so can be hosed thru without lifting, making cleaning easier. They are also treated with both anti-fungal and anti-bacterial agents. They come 27 per box, (3 sq meters) and come in light blue, beige or ocean blue. Sold FOB Factory Herontile, box of 27 $ Aquatic PVC Matting Designed for aquatic centers, this PVC matting features 4 way drainage, built-in antibacterial additives and above all it its very comfortable to walk on. The material is available in rolls 33 feet long in three widths. This matting conforms to slopping floors and is very easy to cut and form. This matting is long lasting, tolerates chlorinated water and cleaning chemicals. If you have an area that puddles whether a hallway, shower room or deck area. Call for a sample. Available colors include: Oxford Blue,Ocean Blue, Mulberry Red and Grey. All colors use black lower ribbing. Pricing is FOB Factory Aquatic PVC Matting Roll 24 inch by 16 1/ 2 feet $492.10/roll Aquatic PVC Matting Roll 24 inch by 33 feet $894.69/roll Aquatic PVC Matting Roll 36 inch by 16 1/ 2 feet $684.71/roll Aquatic PVC Matting Roll 36 inch by 33 feet $ /roll Aquatic PVC Matting Roll 48 inch by 16 1/ 2 feet $936.19/roll Aquatic PVC Matting Roll 48 inch by 33 feet $ /roll OCEAN Blue MULBERRY RED Now available in half rolls grey OXFORD BLUE Koolgrips Hand Rail Covers These are spandex covered neoprene tubes designed to cover 1.9 OD handrails, protecting bathers from extreme heat and cold, and providing a more comfortable and secure grip. They come in 4 lengths, and have a nylon zipper closure which is normally secured by a tie lock to prevent theft. UV inhibitors for outdoor use and an Anti-Microbial treated. KGPB Pair of Blue 4 Koolgrips $ KGPT Pair of Teal 4 Koolgrips $ KGPD Pair of Tan 4 Koolgrips $ Royal blue desert tan indian teal Tarzan Ropes Tarzan ropes and rope mounting brackets are made to order based on customer specifications. Price estimates for specific applications on request. Toll Free Line: Fax: Phone:

22 6 2 3/4 " deck & change room drainage Mini Channel Drainage System Mini channel is used in many facilities on deck and/or in change rooms for drainage of wastewater. The channel (imbedded in concrete floor) is a molded polyurethane molded with honeycomb structure for strength and durability. Channel, 45 s, adapters to connect to piping are each bought separately as required to configure a given system. Top grating is supplied in 3' sections in various colors as required for new applications and to replace damaged or worn grates. Mini Channel System Parts Top Grating - 3' sections Specify colour $ Channel Drain - 6' sections $ Stainless Screws (Grate), FH-#4 x 5/8" $ Coupling $ End Cap $ " End Outlet $ " Bottom Outlet $ " x 3" Adapter $ " x 4" Adapter $ Fabricated Tee with Grate $ Fabricated 90 Elbow with Grate $ Elbow with Grate $52.05 Spee-D Channel Spee-D Channel is a larger drainage system found in some newer facilities. All the same parts and grates are available as for Mini-Channel Grating. Please enquire Top Grating - 2' sections - Specify colour $ Channel Drain - 10' sections $ /8 " Deck Drain System Item No Description Dimensions price Deck drain grill bar 1½"W x 7/8"H x 6' L PVC $84.35 Other drain system components available, please enquire. Grill Bar 4 x 3 Drain Reducer Tee Section Single End Cap Point Corner Section 12' - 4" Dia. Coupling Formliner Thru Connector Corner Connector End Connector 94 Phone: Fax: Toll Free Line:

23 pool trench & gutter grate products Standard PVC Peplacement Grating Radius Grating 35m mm High (42 pcs/meter) Model No Description Quantity price Radius grating 35mm H x 195mm 470/box POR Radius grating 35mm H x 245mm 320/box POR Radius grating 35mm H x 295mm 300/box POR Radius grating 35mm H x 335mm 250/box POR Radius Grating 35 mm High 6 Radius Grating 22mm High (45 pcs/meter) Model No Description QuantityPrice Radius grating 22mm H x 195mm 470/box POR Radius grating 22mm H x 245mm 320/box POR Radius grating 22mm H x 295mm 300/box POR Radius grating 22mm H x 335mm 250/box POR Radius Grating 22 mm High Modular Grating Model No Description Quantity price Modular grating 22mm H x 195mm W 340/box POR Modular grating 22mm H x 245mm W 305/box POR Modular Grating Grating Tile (5 pcs/meter) Model No Description Quantity price Grating tile 22mm H x 245mm W 52/box POR Grating tile 22mm H x 295mm W 45/box POR Grating tile 22mm H x 335mm W 38/box POR Pro Curb Edge Profile Fabricated from rigid PVC this edging will work with most grating profiles available. One leg is set up for use with one inch tall grating and one is set for 22 MM grating. It can also be supplied with slotted edge for easy use with radius trench applications. Supplied in 6 foot pieces available in white only Pro Curb Edging 5.00/ft. Grating Tile Indestructible replacement for Modular Grating & Grating Tile - see Duradek Grating page 93. Toll Free Line: Fax: Phone:

24 6 Lawson Grating by Neptune Benson Lawson Grating makes high quality PVC Grating in two primary styles, with a wide range of sizes in each style. The material is the highest quality PVC for flexibility, strength, and UV protection. Lawson offers a 10 year warranty. The non-skid pattern has a coefficient of friction to 0.8 ASTM, the highest in the industry, and designed to be self draining to limit algae growth. Available in five standard colors, white, bone, tan, gray and black. The typical height is 1, and widths from 6 to 18 are standard. Cutting to non-standard widths, prefabricated corners, and Parallel Grating made to a specific radius are available as custom orders. Lawson Grating uses a hold down system consisting of small stainless steel clips which fit into a slot in the grating and are screwed in place every few feet for security. For pricing please let us know your height, width, lineal feet and style and we will reply with a quotation. Lawson Parallel Grating Lawson Radius Grating Lawson Colour Grating Duradek Grating Virtually indestructible grating for pool gutters Duradek grating is very well suited to use in and around aquatic centres. It is made using vinyl ester resin and a very high percentage of glass fibre; the result is the most durable grating material we have seen. Product characteristics match requirements for use in the swimming pool environment including: corrosion resistant, non-conductive, high impact and fatigue strength, resistant to chipping and cracking, it also features an exceptional non-slip texture that is not harsh to swimmer s feet or bathing suits. Duradek also locks each bar into place both mechanically and chemically, ensuring the bars will not ever come loose or move. The product can be fabricated to accommodate any width of gutter. We have done applications this year with bars both perpendicular and parallel to the wall. Please call today to see if Duradek can work for your gutter; we can provide delivery, pricing, installation detail and fabrication options to help with unusual trench configurations. Description Price - Approximately Duradek $40.00/square foot Example: a typical 25m rectangular pool with a 14" wide trench would cost about $12, to completely replace existing grating. Call with gutter detail for an exact quotation and a sample of Duradek to test in your facility. Stair Systems Replace old degraded waterslide stairs with Duradek Stair Systems. System includes all pultruded fiberglass stair treads, side stringers and complete railings. Buy a whole system complete or just the parts you need. Call for information, delivery and pricing. Duradek is also available in 22MM high profile. This profile allows Duradek to fit gutters using the most common white plastic grating in the field Phone: Fax: Toll Free Line: