FIREPROOFING INTUMESCENT COATING. Electric actuators Pneumatic actuators Junction boxes
|
|
- Maria Whitehead
- 6 years ago
- Views:
Transcription
1 FIREPROOFING INTUMESCENT COATING Electric actuators Pneumatic actuators Junction boxes
2 Features Intumescent coating which is manufactured by Mov Limited is removable type. Thickness of intumescent material is 15mm, reinforced with wire mesh in mid depth, to enhance its performance and protects the valve actuator for 30 minutes against hydrocarbon pool fire. Based on this design capabilities, the valve actuator is not required to be sent to factory for coating any more. The intumescent coating can be installed on site for existing actuators without any modification of the actuator. The design of the intumescent coating comes in the form of 4 or 5 sections and assembled / secured with external fixing screws supplied by Mov Limited. The final painting used on the intumescent coating is an approved paint meant for the protection against UV rays. Certificate UL1709 hydrocarbon fire Jet Fire as per ISO Ambient temperature -30 to to +150 (option) Quality system ISO 9001:2008 ISO 14001:2004 Material Intumescent Epoxy Thickness Average 15mm
3 Performance properties The intumescent coating is in a solid state. Until and when in contact with fire the intumescent coating (coating surface) is converted into a highly viscous liquid. The intumescent coating then react and the reaction combines combustion of the epoxy and gas liberation. This result in an expansion up to 8 times the initial thickness. The expansion is to form a low density, carbonaceous insulation char. The layer of char absorbs a large part of the heat generated by the fire, thus maintaining the actuator and its internal parts within the critical temperature limit under the hydrocarbon fire. Application Electric actuators Pneumatic actuators Junction boxes Test Criteria UL1709 is rapid rise fire tests of protection materials. The time-temperature fire curve of UL1709 is severe hydrocarbon fire which is possible to occure in refinery and petrochemical plants. The valve actuator should be maintained his operation for 30 minutes under UL1709 hydrocarbon fire. UL1709 time-temperature fire curve is shown below. Temperature ( ) Time (min) 2/3
4 Features Pushbutton / Lamp Access door is provided for easy access to pushbutton switches and indication lamps. During normal operation, the operator can access the pushbutton by simply opening the access door. Terminal Block Separate fireproofing cover is assembled in terminal block side for easy access to terminal block. It is not necessary to remove all or whole part of intumescent coating during connection of power including installation of control cables. Manual Handwheel Manual hand wheel and Hand / Auto declutch lever are located on the exterior of intumescent coating. This is for the operator to operate it quickly during emergency condition / situation. Thrust Base Separate intumescent coating is provided for thrust base. No additional work is required during assembly of actuator to valve body. Solenoid and Limited Switch Control units of pneumatic actuator are located inside of fireproofing enclosure. Access door is provided for monitoring and operation of the control units.
5 Paint Primer is applied prior to final painting on the intumescent coating. In order to prevent chemical reaction, only approved paint is applied / used on the intumescent coating. Factory standard final colour is grey. But customer s requirement can also be considered. Installation The intumescent coating compose of various parts like, PCB cover, motor cover and terminal cover. They are assembled / installed together with SS304 fixing screw. To prevent any damages, the intumescent coatings are separately packed. Anybody can assemble / install the intumescent coating in their facility prior to shipment, This includes actuator factory, valve factory or on site. Life time No major maintenance is required for intumescent coating. Only requirement is the maintenance of the surface painting due to decoloration. Factory only suggest the use of approved paint for this application. 4/5
6 Advantage Light weight. Can be installed on existing actuator. No modification is required of the actuator. Easy for installation and removal. No special tool is required. Installation space is not required. Can be re-used in the event of actuator replacement. Even though motor damaged, re-coating is not required. Excellent finishes in decorative grade. Separate storing of intumescent coating is possible, against damage during erection of valve / actuator. Raw Material Colour Grey Gloss level Not applicable Volume solids 100 % Typical thickness 15mm Density 1000 kg / m 3 casting Method of application Casting
7 Certificates 6/7
8 1B-6L, Gilcheon Industrial Complex, Gilcheon-Ri, Sangbuk-Myoun, Uljoo-Gun, Ulsan City, , Korea Tel / Fax / mov@mov.co.kr Published data may be subject to change without prior notice due to a process of on-going product development Designed by DesignHUB
FIREPROOFING INTUMESCENT COATING ELECTRIC ACTUATORS PNEUMATIC ACTUATORS JUNCTION BOXES
FIREPROOFING INTUMESCENT COATING ELECTRIC ACTUATORS PNEUMATIC ACTUATORS JUNCTION BOXES FEATURES Intumescent coating which is manufactured by Mov Limited is removable type. Thickness of intumescent material
More informationPNEUMATIC RACK & PINION ACTUATOR
PNEUMATIC RACK & PINION ACTUATOR series RA SERVOVALVE spa Via Quasimodo 27-20010 S.STEFANO TICINO (MI) PHONE: 0039-029748461 FAX: 0039-0297484646 E-mail: servovalve@servovalve.it RA Rev. 0/15 SERIES RA
More informationProduct Datasheet. Cable TV Junction Box (Page 4)
JUNCTION BOX Product Datasheet Junction Box Bolted Type (Page 2) Cable TV Box (Page ) Cable TV Junction Box (Page 4) Telephone Box (Page 5) Telephone Junction Box (Page 6) GRP Junction Box Enclosures are
More informationInsulating cable tray
Cable conduction and protection system 66 raw material colour U23X Gris UV 66 U23X For support, protection and conduction of cables Good performance outdoors and to corrosion due to over 40 years experience
More informationBULLETIN OCTOBER DeZURIK ROTARY DIAPHRAGM ACTUATORS
BULLETIN 70.00-1 OCTOBER 2012 DeZURIK ROTARY DIAPHRAGM ACTUATORS 2 2012 DeZURIK, Inc. Design & Construction DeZURIK rotary diaphragm actuators are available for use on rotary control valves including:
More informationENGINEERED HANGERS PRODUCT LINE ANVIL MARKETS DESIGN SERVICES
ENGINEERED HANGERS PRODUCT LINE Variable Springs Constant Supports Hydraulic Snubbers Vibration Sway Braces Sway Struts Limit Stops We also provide: Special Fabrication/ Miscellaneous Structural Steel
More informationProduct features & Overview. N1 - N4 A Rotary and part-turn actuators
Product features & Overview N1 - Rotary and part-turn actuators 20 N1 - Rotary and part-turn actuators Rotary and part-turn actuators Product features Wide torque range Wide selection of output shafts
More informationMaintenance-free metal-seated globe valves. Grey cast iron PN 16 DN Nodular cast iron PN 16 DN Nodular cast iron PN 25 DN
Type Series Booklet 7150.1/9-10 BOA -H Maintenance-free metal-seated globe valves with bellows Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN 15-350 Nodular cast iron PN 25 DN 15-150 Applications
More informationMaintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1/5-10 BOA R -H Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16
More informationTechnical Principles of Valves
Technical Principles of Valves Symbols and Circuit Functions Symbol to DIN-ISO 1219 The circuit function illustrations are defined to the DIN-ISO 1219 Standard. These can be used to show other switching
More informationClamping Handles & Adjustable Tension Levers. Leaflet No. A03.1
I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Leaflet No. A03.1 Clamping Handles & Adjustable Tension Levers I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Who we are
More informationAir Operated Stainless Steel 6000psi Ball Valve
Type: PA2811 Actuator fitted via mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned spring sets,
More informationPROCESS INDUSTRY PNEUMATIC SOLUTIONS
PROCESS INDUSTRY PNEUMATIC SOLUTIONS Pneumatrol provide engineered pneumatic solutions for use within hazardous and non-hazardous area environments. For over 50 years Pneumatrol has developed the technical
More informationUNIDIRECTIONAL Knife Gate Valve
12/04/2016 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve. Mechanically welded body. Various seat and packing materials available. Face to face dimension in accordance with standard, it
More informationVALVITALIA VALVE OPERATORS
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. VALVITALIA VALVE OPERATORS 1 VALVITALIA AUTOMATION DIVISION PROFILE Valvitalia Automation Division manufactures all type
More informationA Type Double Acting Actuator Type: PA2911
Type: PA2911 Actuator fitted via mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned spring sets,
More informationEJB Enclosures. ATEX II 2 G Ex d IIB+H2 T6...T3 - II 2 D Ex td A21 T85 C C IECEx Ex d IIB+H2 T6...T3 - Ex td A21 T85 C...
EJB Enclosures ATEX and IECEx Zone 1 certified Explosion proof Marine grade copper-free aluminium IP66 The EJB Series is a range of explosion-proof enclosures, available in either aluminium alloy (EJB)
More informationScotch Yoke Actuators 2016 EDITION. Heavy Duty Pneumatic Actuators SHD and CHD series. The Best Way To Automate Your Process.
The Best Way To Automate Your Process Heavy Duty Pneumatic Actuators SHD and CHD series Scotch Yoke Actuators 2016 EDITION Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Tel: +1.636.272.4934
More informationBALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
More informationProduct features & Overview. KA Linear actuators
Product features & Overview Linear actuators 66 Linear actuators Linear actuator Product features Wide range of force outputs Solid metal housing Large stroke range Maintenance-free gearbox Wide range
More informationBSM Series Pneumatic & Hydraulic Actuator Systems for Valves and Dampers
BSM Series Pneumatic & Hydraulic Actuator Systems for Valves and Dampers WORLDWIDE AUTOMATION SOLUTIONS The Fast-Track Manufacturer for Actuators & Controls Introduction BSM Actuators & Controls BSM Actuators
More informationFEATURES FLP SERIES COMPLETE ASSEMBLIES FL SERIES PRODUCT CONFIGURATOR ONE VALVE DOES IT ALL
Thermal Shutdown Valves for Fire Protection Systems FLP SERIES COMPLETE ASSEMBLIES BI-TORQ Valve Automation s complete line of API 0 certified quarter-turn valves suit a wide range of applications. Carbon
More informationPekos valve automation
Pekos valve automation Pekos valve automation Pekos Valves S.A has been designing and manufacturing ball valves since 1988, catering for a wide range of different industries. Pekos Valve automation division
More informationButterfly valves. Ghibson Italia s.r.l. via Cassola 6/ Monteveglio (BO) Italy
Butterfly valves pneumatic electric hydraulic pneumatic actuators Technical features 1 Elements list 2 Tables 3 torque 3 dimensions 5 Solenoids 6 options and 6 Declutchable gearboxes 7 electric actuators
More informationInnerlynx Type UL Fire Rated 3Hour Fire Stop ADVANCE PRODUCTS & SYSTEMS, INC. ISO-9001 CERTIFIED COMPANY - FM
Innerlynx Type UL Fire Rated 3Hour Fire Stop ADVANCE PRODUCTS & SYSTEMS, INC. ISO-9001 CERTIFIED COMPANY - FM53705 www.apsonline.com Why choose Innerlynx? offer 21 different sizes for all pipe diameters
More informationPG Series 180º Rotation Pneumatic Actuators
PDF Published April 18, 2016 PG Series 180º Rotation Pneumatic Actuators for Chemline 3-way ball valves up to 4 material: Epoxy and Rilsan coated aluminum SERIES: PGS Spring Return PGD Double Acting control
More informationDYNACTO 12 to 400. Spring return hydraulic actuators. DYNACTO 12, 25, 50 and 100: rack and pinion kinematics
Type series booklet DYNACTO 12 to 400 8556.11/3--10 Spring return hydraulic actuators DYNACTO 12, 25, 50 and 100: rack and pinion kinematics DYNACTO 200 and 400: scotch -yoke kinematics Output torques
More informationMaintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1-10 BOA-H R Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN
More informationVALVE WITH UV ACTUATOR
CHARACTERISTICS The 3-way stainless steel 783-5+AP (L-port) and 784-6 +AP (T-port) ball valves are dedicated to the mixing, diverting or automatic discharging of industrial unloaded fluids. The valves
More informationPlastic Handles, T-Handles & PVC Grips. Leaflet No. A06.1
I N D U S T R I L M N U F T U R I N G S I N E 1 9 2 3 Leaflet No. 06.1 Plastic Handles, T-Handles & PV Grips I N D U S T R I L M N U F T U R I N G S I N E 1 9 2 3 Who we are Rencol s flexible manufacturing
More informationHEAVY DUTY HORIZONTAL, SEALLESS CENTRIFUGAL PUMP WITH PERMANENT MAGNET DRIVE SYSTEM, NO MECHANICAL SEAL ISO DIN 24256
HEAVY DUTY HORIZONTAL, SEALLESS CENTRIFUGAL PUMP WITH PERMANENT MAGNET DRIVE SYSTEM, NO MECHANICAL SEAL ISO 2858 - DIN 24256 CN MAG-M Series The separation of liquid chamber/atmosphere by means of an isolation
More informationROLLER GATES. Waterman Industries of Egypt. Roller gates are nominated for heavy duty service where large loads and sizes are going to be encountered.
ROLLER GATES Roller Gates are ideally suited for controlling water in any large openings such as may be found in power plants, water and sewage treatment facilities, flood control projects, irrigation
More informationGDD - Supply Grille. Halton GDD. Supply Grille
Halton GDD Supply Grille Horizontal supply, for circular duct installations For cooling and heating applications; suitable also for exhaust Adjustable vertical front vanes, adjustable horizontal rear vanes
More informationAir Operated 3 Way Stainless Steel Ball Valve
Available with actuator function: DOUBLE ACTING, SINGLE ACTING (Failsafe), MODULATING (with optional positioner) Type: 2300R Type: 2310R Type: 2320R Pneumatic actuator direct mounted Actuator fitted via
More informationBIDIRECTIONAL WAFER Knife Gate Valve
09/03/2016 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
More informationRotork Gears Houston. Products and Facilities Rotork Gears, Houston USA. Keeping the World Flowing
Rotork Gears Houston Products and Facilities Rotork Gears, Houston USA Keeping the World Flowing Let Rotork Gears provide you with the complete solution. Rotork, the market leading actuator manufacturer
More informationFEATURES ONE VALVE DOES IT ALL IDEAL FOR YOUR VALVE... OR OURS SURE STOP MOUNTING PLATE BALL OR BUTTERFLY VALVES
Fusible Link Valves for Fire Protection Systems IDEAL FOR YOUR VALVE... OR OURS In addition to high-quality designs for BI-TORQ s own API 0 fire rated valves, we have manufactured customized assemblies
More informationScotch Yoke Actuators Spring return - Double acting
Scotch Yoke Actuators Spring return - Double acting 2 Econ Scotch Yoke actuators Scotch Yoke actuators Fig. 7991 Spring return - Fig. 7992 Double acting Proven quality since 1892 Econ has been offering
More informationLIMIT SWITCHES & POSITION INDICATION
LIMIT SWITCHES & POSITION INDICATION Engineering Creative Solutions for Fluid Systems Since 1901 TECHNOPOLYMER LIMIT SWITCH DESCRIPTION The Pratt Industrial MS41-2 Limit Switch Box represents a new dimension
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More informationPower Systems PU. HYOSUNG MV Gas Insulated Switchgear. ProGIS[MV GIS]
Power Systems PU HYOSUNG MV Gas Insulated Switchgear ProGIS[MV GIS] Power & Industrial Systems Performance Group Hyosung Power Systems has been continuously enhancing customer s value since it started
More informationSimple and Effective, The Tri-Clover Ball Valve.
Simple and Effective, The Tri-Clover Ball Valve. / Series Ball Valves ESE00013EN Applications Tri-Clover ball valves are ideal for applications requiring a full flow body design to minimize line turbulence
More informationCustomized Solutions. Safety & Reliability Stainless steel 316 products
Customized Solutions Safety & Reliability Stainless steel 316 products REDUNDANT CONTROL SYSTEM (RCS) Applications Emergency Shutdown Systems Burner Management Systems Isolation and Venting Systems High
More informationCommon rail injection system
Common rail injection system Pressure limiting valve The pressure limiting valve is located directly on the high-pressure fuel rail. Its function is to limit maximum pressure in the high-pressure fuel
More informationKSB RPH-V. Process pumps. 3. Designation. 1. Application. 2. Design. 4. Operating Data. to API 610, 11th edition and ISO 13709
Type Series Booklet 1316.56/04-EN (A1316.0.2E/8) KSB Process pumps to API 610, 11th edition and ISO 13709 1. Application pumps are mainly used in refineries as well as in chemical and petrochemical plants.
More informationSeries 800 AWWA Butterfly Valves
Series 800 AWWA Butterfly Valves Valve and Gate Group A Century of Experience GA valves are known for long term reliability in the most demanding water and wastewater applications. Whether a simple check
More informationWAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationVALVES WITH NA ELECTRIC ACTUATOR
505-507 VALVES WITH NA ELECTRIC ACTUATOR CHARACTERISTICS The 505+NA and 507+NA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
More informationHYDRAULIC LINEAR ACTUATOR LA17 TABLE OF CONTENTS. 1. GENERAL INFORMATION... p TECHNICAL SPECIFICATIONS and APPLICATION... p.
HYDRAULIC LINEAR ACTUATOR LA17 TABLE OF CONTENTS 1. GENERAL INFORMATION... p. 01 2. TECHNICAL SPECIFICATIONS and APPLICATION... p. 02 3. DESCRIPTION... p. 03 3.1 General 3.2 Pump Unit (HRP17) 3.3 Reservoir/Bypass
More informationHYDRAULIC LINEAR ACTUATOR LA17 TABLE OF CONTENTS. 1. GENERAL INFORMATION... p TECHNICAL SPECIFICATIONS and APPLICATION... p.
HYDRAULIC LINEAR ACTUATOR LA17 TABLE OF CONTENTS 1. GENERAL INFORMATION... p. 01 2. TECHNICAL SPECIFICATIONS and APPLICATION... p. 02 3. DESCRIPTION... p. 03 3.1 General 3.2 Pump Unit (HRP17) 3.3 Reservoir/Bypass
More informationSCOTCH YOKE ACTUATORS
TITOLO TITOLO SCOTCH YOKE ACTUATORS Heavy duty pneumatic actuators SHD and CHD series ATEX GOST -R Quality system: ISO 9000 Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Toll Free: 888.842.9998
More informationKBF200. High Performance Butterfly Valve. KBF200series Valve Sealing Principle KOPECS CO.,LTD. web :
KBF200 High Performance Butterfly Valve KBF200series Valve Sealing Principle 1 web : www.kopecs.com E-mail : kopecs@kopecs.com KOPECS CO.,LTD. TEL : +82-32-865-1711 FAX : +82-32-865-1718 KBF200 High Performance
More informationBERCO S.p.A. Via 1 Maggio, Copparo (FE) Italy Tel Fax
ISO 9001 Cert. n. 0029/4 ISO 14001 Cert. n. 0009A/0 All manufacturers s names, numbers, symbols and descriptions are used for reference purposes only. All parts listed are of Berco original production.the
More informationRCI 200 Series Actuators
PNEUMATIC RCI 200 Series Actuators TECHNICAL DATA SHEET The Remote Control RCI 200 Series Pneumatic Actuator features a modern scotch yoke mechanism for high starting and ending torques in a very compact
More informationSD SERIES MANUAL OVERRIDE GEARBOXES
MASTERGEAR WORLDWIDE SD SERIES MANUAL OVERRIDE GEARBOXES General description The cast iron construction and rugged design of the M-Series has been modified by new components to get an manual override gearbox.
More informationMaterials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 flanges - 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO 10497
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
More informationMini pressure switch Stainless steel switch enclosure Model PXS
Mechatronic pressure measurement Mini pressure switch Stainless steel switch enclosure Model PXS WIKA data sheet PV 34.36 Process Mini Series Applications Pressure monitoring and control of processes Safety-critical
More informationACE VALVE COMPANY LIMITED
ACE VALVE COMPANY LIMITED Http://www.acevalve.co.kr 2013.04. ACE VALVE CATALOG 278-4 Mangdeokri, Juchonmyun, Gimhae, Gyeongnam, Korea. TEL +82--310-0 FAX +82--329-06~8 E-mail acevalve@acevalve.co.kr Homepage
More informationLinear actuator. Product features. Overview. Solid metal housing. Constant positioning times under fluctuating loads
Linear actuator VK Product features Constant positioning times under fluctuating loads Solid metal housing Up to four auxiliary position switches possible Maintenance-free gearbox Wide selection of valve
More informationCompact pressure switch Model PCS
Mechatronic pressure measurement Compact pressure switch Model PCS WIKA data sheet PV 33.30 for further approvals see page 4 Process Compact Series Applications Pressure monitoring and control of processes
More informationHEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10
HEAVY DUTY KNIFE GATE VALVE The SERIES knife gate is a uni-directional lug type valve designed according to the MSS-SP-1 and TAPPI TIS 405- standard for industrial service applications. The design of the
More informationPL1 VALVE WITH UM ELECTRIC ACTUATOR
PL1 VALVE WITH UM ELECTRIC ACTUATOR FEATURES The PL1 butterfly-valves are wafer-style valves intended for current valve applications. This PN10 butterfly-valve of reinforced polypropylene is used to isolate
More informationActual-position Feedback Unit. SISTO-SK-i. For Valves with Linear Actuators Stroke: 5-46 mm. Type Series Booklet
SISTO-SK-i For Valves with Linear Actuators Stroke: 5-46 mm Type Series Booklet Legal information/copyright Type Series Booklet SISTO-SK-i All rights reserved. The contents provided herein must neither
More informationCABINET MOUNTING. 501 series
CABINET MOUNTING 50 series FEATURES The new 50 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
More informationFeatures Enclosed Burner. Enclosed Burner. No visible flame. Controlled Combustion environment with natural draft design
97311 The S&J 97311 Enclosed burner incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters or landfill gas. This
More informationMEDIUM VOLTAGE CE-B36 METAL CLAD SWITCHBOARDS. CE - B36 - C - en - REV
CE - B36 - C - en - REV.00 2011.9 EDIU VOLTAGE EDIU VOLTAGE APPLICATION CE-B etal Clad switchboards are designed for use in public and industrial distribution system up to 36kV for the operation and protection
More informationType Series Booklet. Hydraulic Actuator
Hydraulic Actuator HQ HQ 10/10GS/10S - 200/200GS/200S: Force Transmission via Rack-and-pinion Kinematics HQ 400/400GS/400S - 1600/1600GS/1600S: Force Transmission via Toggle-lever kinematics Output Torques
More informationDouble acting pneumatic actuators. ACTAIR 1.5, 3, 6, 12, 25 and 50: rack and pinion kinematics. ACTAIR 100 and 200: scotch -yoke kinematics
Technical leaflet 8515.1/3--10 ACTAIR 1.5 to 800 Double acting ACTAIR 1.5, 3, 6, 12, 25 and 50: rack and pinion kinematics ACTAIR 100 and 200: scotch -yoke kinematics ACTAIR 400 and 800: yoke AMRI patented
More informationTechnical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationFV Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations
Applications For use in hazardous locations defined by the NEC and CEC as Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Marine Outdoor Salt Water; UL1598A and. As well
More informationNK /310A2F1AE-SBAQE
GRUNDFOS DATA BOOKLET NK15-315/31A2F1AE-SBAQE Grundfos Pump 98318632 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nkbasis/98318632/nk-15-315-31-a2-f-a-e-baqe.html
More informationFactor 1) Modulating torque 4) [Nm] 200 F14 G1/2 GK : :
Nominal Max. valve 4) Valve Valve attachment Type Reduction ratio EN ISO 5210 Factor 1) Nominal Gearbox Max. input s Input shaft 2) Weight 3) Option DIN 3210 Option [kg] 120 60 GK 10.2 1:1 0.9 135 66 20
More informationVALVE WITH UV ELECTRIC ACTUATOR
762-763 VALVE WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 762-763+UV ball valve is dedicated to the automatic opening/shut-off of pipes carrying medium pressure unloaded industrial fluids. This full
More informationBackflushing Filter AutoFilt RF3
Backflushing Filter AutoFilt C 2,5 4 6 8 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL The automatic back-flushing filter AutoFilt is a self-cleaning system for extracting particles from lowviscosity fluids.
More informationHEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
More informationVALVES WITH UM ELECTRIC ACTUATOR
505-507 VALVES WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 505+UM and 507+UM cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
More informationMEDIUM VOLTAGE CE-B METAL CLAD SWITCHBOARDS. CE - B - C - en - REV
MEDIUM VOLTAGE MEDIUM VOLTAGE APPLICATION CE-B Metal Clad switchboards are designed for use in public and industrial distribution system up to 24kV for the operation and protection of lines, generators,
More information97311T. Features T Enclosed Burner with Touch Screen Control Panel. No visible flame. Touch Screen Control Panel
97311T Designed for complete automatic operation of the entire Burner System, the S&J 97311T Enclosed Flare and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic
More informationPBV s Engineering Excellence At Work
PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves
More informationR-type, RY-type EPR-Series. Actuators for Quarter-Turn Valves
R-type, RY-type EPR-Series Actuators for Quarter-Turn Valves >> Introduction The EPR-Series pneumatic actuator provides a rugged solution for quarter-turn actuation while reducing maintenance requirements.
More information3 & 4 WAY DIVERTER VALVES DESIGN FEATURES
3 & 4 WAY DIVERTER VALVES The 3V and 4V models are diverter valves designed to handle solid loaded fluids. Mainly used for pulp stock in the Pulp and Paper industry. Sizes: 80 to 300 (larger diameters
More informationVALVES WITH UV ELECTRIC ACTUATOR
505-507 VALVES WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 505+UV and 507+UV cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
More informationBIDIRECTIONAL WAFER Knife Gate Valve
05/10/2012 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
More informationBUTTERFLY VALVES + NA ELECTRIC ACTUATOR
1150-1158 BUTTERFLY VALVES + NA ELECTRIC ACTUATOR CHARACTERISTICS The butterfly valves 1150 to 1158 are dedicated to the automatic opening/shut-off of various fluid pipes. It has a ductile iron body. Thanks
More informationHKC HM- Series Electric Valve Actuators HM- Series
Actuation&FlowControl HKC Valve Automation Smart & Intelligent Design HM-Series Multi-turn Electric Actuators HKC Co., Ltd 5RA-503, 674-3 Sunggok-Dong, Danwon-Gu, Ansan-Shi, Kyounggi-Do, Republic of Korea
More informationMiniature pressure switch, flameproof enclosure Ex d For the process industry Model PXA
Mechatronic pressure measurement Miniature pressure switch, flameproof enclosure Ex d For the process industry Model PXA WIKA data sheet PV 34.38 Applications Pressure monitoring and control of processes
More informationTUNNEL54. Safety and fire resistance VENTILATION LIGHTING
TUNNEL54 Safety and fire resistance VENTILATION LIGHTING 238 TUNNEL54 Safety and fire resistance VENTILATION TUNNEL54 fire resistant sockets for ventilators Page 240 LIGHTING TUNNEL54 junction boxes with
More information1-X-290 SERIES MULTISPRING PNEUMATIC DIAPHRAGM ACUATORS
1-X-290 SERIES MULTISPRING PNEUMATIC DIAPHRAGM ACUATORS ACA 0127-04/12-2 - 1-X-290 SERIES MULTISPRING PNEUMATIC DIAPHRAGM ACTUATORS 1-X-290 Series multispring pneumatic diaphragm actuators are designed
More informationrange to scotch-yoke pneumatic & hydraulic actuators, rack and pinion actuators and relevant control systems.
Company Profile History Elfor Controls, established in the last 70 s, is an Italian company specialized in engineering and manufacturing a complete range of valves actuators and related accessories. The
More informationGlass Reinforced Polyester Enclosures
42 The GRP range comprises 16 sizes of enclosure manufactured in glass reinforced polyester (GRP). This material is highly resistant to contamination from oils, fats, aliphatic and aromatic carbohydrates,
More informationSuspension System CS-3000
Suspension System CS-3000 Straight coupling Elbow coupling (colour) 1015300177 RAL 9006 white aluminium 1015300001 RAL 16 anthracite grey 101530017 RAL 9006 white aluminium 1015300002 RAL 16 anthracite
More informationPP Series Pneumatic Actuators
PDF Published September 9, 0 PP Series Pneumatic Actuators for Chemline ball valves up to 6 for Chemline butterfly valves up to 6 MATERIAL: Polyamide SERIES: PPS Spring Return PPD Double Acting CONTROL
More informationAir Inlet/ Discharge Port
Metering Pumps The ProMinent is a pneumatically-actuated metering pump with a capacity in the 0.1 to 3.9 gph (0.24 to 14.8 l/h) range at maximum backpressures of 21 to 232 psig (0.9 to 16 bar). The consists
More informationENNACTO 200 to Single acting hydraulic actuators with gas cartridge (Nitrogen) ENNACTO 200 to 1600: scotch -yoke kinematic
Type series booklet ENNACTO 200 to 12500 8560.11/4--10 Single acting hydraulic actuators with gas cartridge () ENNACTO 200 to 1600: scotch -yoke kinematic ENNACTO 3200 to 12500: Rod and crank kinematic
More informationSTC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way
STC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way Ordering Part No. = (e.g., E 1/2-3-S) Indicator / Control E 1/2 - - - 3-S Model Name Electric Actuated Valves E Port Size
More informationMEDIUM VOLTAGE CE-B METAL CLAD SWITCHBOARDS. CE-B-C-en-REV
CE--C-en-REV.04 2016.1 MEDIUM VOLTAGE MEDIUM VOLTAGE APPLICATION CE- Metal Clad switchboards family are designed for use in public and industrial distribution system up to 40,5kV for the operation and
More informationFeatures. Suitable for use in SIL 2 applications. Available in LP low power version with less than 1.65 A current consumption. General application
The ICON 2000 v4 series are electronically-configurable quarter and multi-turn actuators with advanced operation, control, setting and maintenance characteristics Features General application The ICON
More information