advanced FLOW engineering Air Intake System Product Guide Make: GM Model: Trucks (GMT900) Year: Engine: V8-6.0L P/N: &

Transcription

1 advanced FLOW engineering Air Intake System Product Guide Make: GM Model: Trucks (GMT900) Year: Engine: V8-6.0L P/N: &

2 Please read the entire product guide before proceeding. Ensure all components listed are present. If you are missing any of the components, call customer support at Ensure you have all necessary tools before proceeding. Do not attempt to work on your vehicle when the engine is hot. Disconnect the negative battery terminal before proceeding. Label Qty. Description Part Number A 1 Black Steel Housing B 1 Air Intake Tube C 1 Injected Molded Adaptor D 1 Air Filter (P5R) or (PDS) E 1 Black Steel Cover 05C00780 F 1 3/8 Inch Hose G 1 Reducer Coupling H 1 Straight Coupling I Clamp J Clamp K Clamp L 1 Brass Fitting M 8 Button Head Screw Installation will require the following tools: T10 Hex Key, 5/16 Nut Driver, 10mm Socket, Ratchet Note: Legal in California for use on race vehicles only. The use of this intake system on vehicles used on public streets or highways strictly prohibited in California and others states that have adopted California emission regulations.

3 AIR INTAKE SYSTEM COMPONENTS A B C D E F G H I J K L M afepower.com

4 Figure A: Stock Intake Reference Figure A: Step 1: Unplug the harness from the MAF sensor (1) Step 2:Remove engine cover by pulling up on cover (7) Step 3: Loosen the clamps (5 & 6) Step 4: Remove crank case breather line from engine (4) Refer to Figure B Step 5: Remove factory tube (3) and factory air box (2) Figure B: Crank Case Breather Figure C: Factory Air Box Plate N & J D

5 AIR INTAKE SYSTEM INSTALLATION Reference Figure C: Step 6: Remove plate under factory air box by unbolting the 4 bolts Figure D: Pre-assemble Housing Figure E: Install Housing M M M M G G 1 E C 3 A Reference Figure D: Step 7: Attach the adaptor (C) to the housing (A) with the 5 button head screws (M) Step 8: Screw on the stock MAF sensor (1) using the factory screws Reference Figure E: Step 9: Install the housing (A) using the factory bolts Figure F: Filter Installation Figure G: Cover Installation D E afepower.com

6 AIR INTAKE SYSTEM INSTALLATION Reference Figure F: Step 10: Attach the filter (D) to the adaptor (C) Reference Figure G: Step 11: Screw on the top cover (E) using the three button head screws (M) Figure H: Pre-assemble tube H & J B L F G, I, & K Figure I: Final Steps Reference Figure H: Step 12: Connect the reducer coupler (G) and clamps (I & K) to the tube (B) Step 13: Connect the straight coupler (H) and clamps (J) to the tube Step 14: Screw on the brass fitting (L) to the tube Step 15: Attach the 3/8 hose (F) to the brass fitting Reference Figure I: Step 16: Connect the tube from the housing to the throttle body Step 17: Tighten up all clamps Step 18: Replace crank case line with 3/8 hose Step 19: Plug the harness into the MAF sensor Step 20: Re-mount engine cover and reconnect batttery

7 WARRANTY & INFORMATION Filter Media afe offers three types of filter media. Determining which filter you have is simple. Look at the top of the filter and you will see one of the following: If the top has the afe logo, the media is blue; you have an oiled Pro 5R. afe offers a recharging kit with the blue oil, part number (Squeeze) or (Aerosol) If the top has the Pro Dry S logo, the media is gray; you have a NON-oiled, Pro Dry S and should never oil this filter. afe offers a cleaning kit, part number If the top has the Pro Guard 7 logo, the media is gold; you have an oiled Pro Guard 7. afe offers a recharging kit with the gold oil, part number or (Aerosol) Detailed cleaning instructions are provided with the afe recharging kits and cleaners. Warranty afe warrants their intake systems to be free of defects from workmanship and materials for a period of two (2) years, provided the intake system was installed in an afe recommended application according to afe installation instructions and the air filter properly cleaned utilizing afe cleaning solution and oil. Damage from abuse, improper cleaning, improper oil and improper installation or from open flame is not covered by this limited warranty. In event of a defect of an afe product within the period covered by this limited warranty, the purchaser can return the product to the dealer where it was purchased or send the product to afe at the address listed below after obtaining a Return Good Authorization (RGA) number from afe. The original register receipt will be required as proof of purchase. Purchaser will be entitled to a refund of the entire purchase price or a replacement of the product at afe discretion. Purchaser shall be responsible for the cost of shipping the defective product to afe. An RGA number can be obtained by calling afe customer service. Products shipped without an RGA number will be refused. A refund or replacement of the product shall be the sole remedy available under this limited warranty and afe shall not be responsible for consequential or incidental damages. (Some states do not allow this exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply). This warranty gives you specific legal rights, and you may have other rights, which vary from state to state. afepower.com

8 afepower.com advanced FLOW engineering, inc. 252 Granite Street Corona, CA TEL: TECH: P/N: