PEC FLY OWNER'S MANUAL SERIAL NO.'S. through. Parts Manual. Maintenance Manual. REVISED: May 19, Contents

Transcription

1 15,22 16,23 157,159A 28 PEC FLY OWNER'S MANUAL 17,24 30 REVISED: May 19, SERIAL NO.'S through Contents Parts Manual FRAME & PAD ASSEMBLY WORKBOX TO FRAME ASSEMBLY WORKBOX & MOVEMENT ARM ASSEMBLY SEAT & FOOT LEVER ASSEMBLY BELT & PULLEY ASSEMBLY WEIGHT STACK ASSEMBLY WEIGHT STACK ASSEMBLY PARTS LIST PARTS LIST Maintenance Manual Follows page See last pages of this manual for 2ST Strength Circuit Exercise Order Diagram and 2ST Floor Plan Kit PARTS AND SERVICE 709 Powerhouse Road Independence, Virginia Fax:

2 FRAME & PAD ASSEMBLY 19,26 19, ,

3 WORKBOX TO FRAME ASSEMBLY

4 WORKBOX & MOVEMENT ASSEMBLY REV

5 SEAT & FOOT LEVER ASSEMBLY SEAT HIGH 2WPF,2WPFS

6 BELT & PULLEY ASSEMBLY REVISION

7 24 WEIGHT STACK STANDARD REF #...PART # lb. WEIGHT STACK (20-250) A BOLT HH2 7/16-14 X 4 1/2 BLACK B /4-20 X 3/4 TORX HD TYPE "F" SCREW BLACK C NUT NTE 7/16 BLACK D RUBBER WEIGHT STACK WASHER E BOTTOM WEIGHT BUSHING F TOP WEIGHT BUSHING G CHAIN LINK #100 CONNECTING LINK H COIL SUPER 6" I /4 EXTERNAL SNAP RING J SNAP RING 1" K NYLINER PLASTIC BUSHING L PIN WEIGHT SELECTOR W/MAGNET 4" LENGTH M TOP WEIGHT SLEEVE N HOLE PLUG 1 1/4 DIA WHITE O BELT ROLLER P DECAL WARNING 3" Q WEIGHT STACK DECAL lbs/kgs R X 4 X TOP WEIGHT STEEL, 10 lbs. S X 4 X SECOND WEIGHT STEEL, 10 lbs. T X 4 X BOTTOM WEIGHT STEEL, 10 lbs U X 4 X BOTTOM WEIGHT STEEL, 10 lbs V WEIGHT STACK PIN 24 HOLE W...BSF509...WEIGHT STACK STAND 8" X " WEIGHT STACK SPACER Y /2 X 3" HOLE PLUG WOMEN'S/MEDICAL REF #...PART # lb. WEIGHT STACK (10-200) A BOLT HH2 7/16-14 X 4 1/2 BLACK B /4-20 X 3/4 TORX HD TYPE "F" SCREW BLACK C NUT NTE 7/16 BLACK D RUBBER WEIGHT STACK WASHER E BOTTOM WEIGHT BUSHING F TOP WEIGHT BUSHING G CHAIN LINK #100 CONNECTING LINK H COIL SUPER 6" I /4 EXTERNAL SNAP RING J SNAP RING 1" K NYLINER PLASTIC BUSHING L PIN WEIGHT SELECTOR W/MAGNET 4" LENGTH M TOP WEIGHT SLEEVE N HOLE PLUG 1 1/4 DIA WHITE O BELT ROLLER P DECAL WARNING 3" Q WEIGHT STACK DECAL (WOMEN'S) lbs/kgs R X 4 X TOP WEIGHT ALUM., 3.5 lbs. S X 4 X SECOND WEIGHT ALUM., 3.5 lbs. T X 4 X BOTTOM WEIGHT ALUM., 3.5 lbs. U X 4 X BOTTOM WEIGHT STEEL, 10 lbs. V WEIGHT STACK PIN 24 HOLE W...BSF509...WEIGHT STACK STAND 8" X " WEIGHT STACK SPACER Y /2 X 3" HOLE PLUG Z WEIGHT STACK DECAL (MEDICAL) #1-30 SUPER STACK REF#...PART # lb. WEIGHT STACK (20-365) A BOLT HH2 7/16-14 X 4 1/2 BLACK B /4-20 X 3/4 TORX HD TYPE "F" SCREW BLACK C NUT NTE 7/16 BLACK D RUBBER WEIGHT STACK WASHER E BOTTOM WEIGHT BUSHING F TOP WEIGHT BUSHING G CHAIN LINK #100 CONNECTING LINK H COIL SUPER 6" I /4 EXTERNAL SNAP RING J SNAP RING 1" K NYLINER PLASTIC BUSHING L PIN WEIGHT SELECTOR W/MAGNET 7" LENGTH M TOP WEIGHT SLEEVE N HOLE PLUG 1 1/4 DIA WHITE O BELT ROLLER P DECAL WARNING 6" Q WEIGHT STACK DECAL lbs/kgs R X 4 X TOP WEIGHT STEEL, 10 lbs. S X 6 X SECOND WEIGHT STEEL, 15 lbs. T X 6 X BOTTOM WEIGHT STEEL, 15 lbs. U X 6 X BOTTOM WEIGHT STEEL, 15 lbs. V WEIGHT STACK PIN 24 HOLE W...BSF509...WEIGHT STACK STAND 8" X " WEIGHT STACK SPACER Y /2 X 3" HOLE PLUG USE CAUTION WHEN WORKING WITH WEIGHT STACK! F R S T U C J M E V J O G K D M E F A B H L Q,Z

8 MINI 24 ADD-ON WEIGHT KIT PEC FLY REF #...PART #...DESCRIPTION AA /8-16 X 3/4 HEX BOLT BLACK BB /8-16 X 2-3/4 HEX BOLT BLACK CC /4 X 1-1/4 WIZ BOLT BLACK DD /4-20 X 3/4 TORX HD TYPE "F" SCREW BLACK EE /8 X 2-1/4 HEX BOLT BLACK FF /8 WIZ NUT BLACK ZINC GG /4 WIZ NUT BLACK ZINC HH /2 SAE FLAT WASHER BLACK II /4 LOCK WASHERS JJ /2 LOCK WASHERS BLACK KK OD 5" SUPER COIL LL MINI WEIGHT BRACKET LR-PF MM ADD ON WEIGHT SELECTOR PIN & KNOB NN MOLDED WEIGHT STAND INSERT OO MOLDED ADD-ON-WEIGHT BASE PP MOLDED ADD-ON-WEIGHT LINK QQ STANDARD MINI WT. STACK PIN RR HOLE PLUG 3/8" BLACK SS ADD ON WEIGHT DECAL LBS/KGS TT CAST ADD-ON SECOND PLATE UU CAST ONE POUND WEIGHT VV RECTANGULAR WEIGHT BUSHING WW...BSF514...MINI-WEIGHT STAND LR-PF XX /4 X 2 PLASTIC SPACER YY /4" LOCK COLLAR XX YY I PP CC GG TT UU VV AAA KK DD MM SS NO WEIGHT STAND: 2LR, 2PF AAA SHORT MINI WEIGHT STACK PIN BBB...BSF514...SHORT MINI WEIGHT STAND OO AA HH HH BBB AA LL HH BB BB HH NN FF USE CAUTION WHEN WORKING WITH WEIGHT STACK! EE HH HH FF 7

9 2ST PEC FLY REV E.L. CODES: 2PFS...FULLY SHIELDED PEC FLY 2WPFS FULLY SHIELDED WOMENS' PEC FLY 2MPFS FULLY SHIELDED MEDICAL PEC FLY 2PF...PARTIAL SHIELDED PEC FLY 2WPF..PARTIAL SHIELDED WOMENS' PEC FLY 2SPF...PARTIAL SHIELDED SUPER PEC FLY REF#...PART#...DESCRIPTION E.L. CODE:..2PFS,2WPFS, 2MPFS, 2PF, 2WPF, 2SPF WL16...WELDMENT KIT PEC-FLY 1...BF508...BACK FRAME ASSEMBLY 2...WB512...WORKBOX 3...CM535...DIAGONAL WORKBOX BRACE 4...CM538...WORKBOX PULLEY IDLER BRACKET 5...MA547...LEFT CHEST MOVEMENT ARM 6...MA548...RIGHT CHEST MOVEMENT ARM 7...LK521...LEFT DRIVE MA LINK 8...LK522...RIGHT DRIVE MA LINK 9...LK523...LINKAGE/SPRING BELT ANCHOR 10...LK530...BELT KEEPER FOR PEC-FLY 11...FL504...FOOT LEVER ASSEMBLY 12...IB400...STND 2/3 INCH PULEY COMBO IDLER BRACKET 13...SE505...PEC FLY SEAT 14...BSF502...PEC FLY BASEFRAME E.L. CODE:..2PF, 2WPF, 2SPF SH42...SHIELD KIT 2PF (PARTIAL) PF LEFT SIDE (PARTIAL) PF RIGHT SIDE (PARTIAL) PF BACK SHIELD " SQ SERIES 170 DUAL LOC " X 2" RECTANGLE SERIES 400 DUAL LOC E.L. CODE:..2PFS,2WPFS, 2MPFS SH43...SHIELD KIT 2PFS (FULL) /4 X 1/2 CUTTING SCREW TYPE F /8 X 1 X 1/2 CHNL LEFT SIDE (FULL) RIGHT SIDE (FULL) BACK SIDE (FULL) " SQ SERIES 170 DUAL LOC " X 2" RECTANGLE SERIES 400 DUAL LOC E.L. CODE:..2PFS,2WPFS, 2MPFS, 2PF, 2WPF, 2SPF SH41...SHIELD KIT PEC FLY KEEP HANDS AWAY RED PINE TREE CLIP INSTRUCTION PLACARD PEC FLY PARTS DIAGRAM PEC FLY /4-20 CLIP NUTS /4 X 3/4 SHIELD SCREWS E.L. CODE:..2PFS,2WPFS, 2MPFS, 2PF, 2WPF, 2SPF BLT16...BELT & PULLEY KIT PEC-FLY BOLT HH5 1/2 X 3 BLACK BOLT HH5 3/8 X 2 1/2 BLACK BOLT HH5 3/8 X 2 3/4 BLACK BOLT HH8 5/8 X 2 1/ BOLT HH8 5/8 X 1 1/ BOLT HH8 5/8 X 3 1/ /4 X 1 WHIZ FLANGE SM PATTERN ZINC 40A /4-20 X 11/16 THREADED INSERT /8 NUT BLACK /4-20 WHIZ FLANGE L/N SM PATTERN ZINC /2 NUT BLACK REF#...PART#...DESCRIPTION /8 LOC WASH BLACK /2 INT LOK WASHER BLACK /8 LOC WASH PULLEY BUSHING ROLLER BELT (ANTI JUMP) ANTI-JUMP SPACER /8 ID PULLEY SPACER 7/8 DIA.627 ID.875 L /4 X 2 ROLL PIN /2 X 2 CLEVIS PIN RUE-22 RUE RING COTTER 1/2" PULLEY SPACER 7/8 OD X 25/64 ID X 3/4 LONG PULLEY IDLER SPACER 33/64 I.D. X WT. ST. BELT ANCHOR WITH 5/16 DIA HOLES WT. ST. BELT ANCHOR (2 HOLE) TEARDROP (CAM) TEARDROP INSERT FOOTLEVER PIN BELT ROLLER 3/4 OD X 1 1/4 L " PULLEY " PULLEY " PULLEY KEVLAR BELT 63" LENGTH ( TO WEIGHTS) KEVLAR BELT 130" LENGTH (M.A.'S) KEVLAR BELT 67" LENGTH (FOOTPEDAL) E.L. CODE:..2PFS,2WPFS, 2MPFS, 2PF, 2WPF, 2SPF FR14...FRAME KIT PEC-FLY /2 X 3 HH5 BLACK /8 X 2 1/4 HH /2 X 3/4 HH /2 X 1 1/4 HH5 BLACK /2 X 2 1/2 HHB SCREW AC 5/16 X 3 BLACK /2 X 3/4 ALLEN CAP SCREW NUT HEX 10MM /8 NTE /2 NTE NUT BLACK ZINC 1/ /16 NUT BLACK /2 FLAT WASHER BLACK /2 LOC WASHER /2 INT LOC WASHER BLACK /16 LOK WASHER BLACK /2" BOLT CAP WASHER /8" BOLT CAP WASHER SEAT ADJUSTMENT HANDLE 7/8" SEAT ADJUSTMENT CABLE, 18" /4" LOCK COLLAR PIN CLEVIS 5/16 X 1 3/ COTTER PIN #RUE-10 mfg. PIVOT POINT SHOCK LEVER P/N HEAD THREAD ON CAST ALUM /4 X 2 PLASTIC SPACER SPACER 1/2 DIA X.058 W X 1/2 LONG RUBBER HAND GRIP, 7/8 X 4 1/ /4" FRAME PLUG " SQ FRAME PLUG /16" WHITE HOLE PLUG X 3 HOLE PLUG RECTANGLE FOOTPAD RIGID IN COMPRESSION, 250 N #7613IL SEAT POSITION INDICATOR ARROW SEAT DECAL 1 BOTTOM -10 TOP (5/8 WIDE) SEAT SHOCK ADJ. TAG SHOCK WARNING DECAL GUIDE RODS 48 3/4 INCHES LENGTH 8

10 REF#...PART#...DESCRIPTION E.L. CODE:..2PFS,2WPFS, 2MPFS, 2PF, 2WPF, 2SPF FP01...FOOTPEDAL KIT PEC-FLY /4 X 3 1/2 SH BOLT /8 NUT BLACK /8 LOK WASHER BLACK FOOT GRIP 1/4 X 2.5 X 1 PVC CH 13 5/8 L /2 X 2 FRAME PLUG " SQ HOLE PLUG MOLDED URETHANE STOP VINYL CAP DIA X 1/2" L BLACK TEXTURE TAPE DOUBLE SIDED 1.5" WIDE 13.5" LONG BUSHING IGUS PLAIN LFI E.L. CODE:..2PFS,2WPFS, 2MPFS, 2PF, 2WPF, 2SPF WX04...WORKBOX KIT PEC-FLY /8 X 3/4 HH5 BOLT /8 X 1 HH5 BOLT /8 X 2 1/2 HH5 BOLT BLACK /8 NTE BLACK /8 FLAT WASHERS /8 LOC WASH /8 LOC WASH BLACK /2 LOC WASH IGUS 1 1/8 ID X 1/2 L NYLON BUSHING /8 X 1 HRF WB SHIELD MOUNT /4 DIA DURO ROD CONTROL ROD /4 X 1 CONNECT LINK BAR FOOTPEDAL SPRING (FOR GUIDE ROD) IGUS 3/4 ID X 1/2 L BUSHING (LFI ) E.L. CODE:..2PFS,2WPFS, 2MPFS, 2PF, 2WPF, 2SPF MV06...MOVEMENT ARM KIT PEC-FLY /2 X 1 1/4 HHB /2 X 1 1/2 HHB /2 X 1 3/4 HH /2 X 1 1/4 AC SCREW AFH 3/8-16 X 1/2 BLACK IGUS 1/2 ID X 5/8 NYLON BUSHING BEARING MOUNT BLOCK UPPER MA AXLE SPACER NYLON LINK STANDOFF /8 X 8 1/2 CLOSED END GRIP PLUG HOLE 1.75 OD X 1.37 ID X.75 L URETHANE BLACK PECTORAL FLY MA BUMPER MCH CAM LEFT MCH CAM RIGHT PP BEARING E.L. CODE:..2WPFS, 2MPFS, 2WPF ST21...SEAT WOMENS & MED. PF KIT PLASTIC BOLT CAP /8 X 2 HH /8 NTE /8 LOC WASH /8" BOLT CAP WASHER ID X 9 OPEN END GRIP /16" WHITE HOLE PLUG OD X.75 ID X.75 L HOLE PLUG SE510...WOMEN'S FOOTREST ASSEMBLY E.L. CODE:..2PFS,2WPFS, 2MPFS, 2PF, 2WPF, 2SPF BR01...SEAT BEARINGS KIT BEARING FAFNIR 203 PP MM O.D. WAVE SPRING SSB-0158-S NYLON SEAT ROLLERS REF#...PART#...DESCRIPTION E.L. CODE:..2PFS,2WPFS, 2MPFS, 2PF, 2WPF, 2SPF IN01INSPECTION KIT INSPECTION STICKER DECAL DECAL NAUTILUS NAMEPLATE 2 1/2 x 9 1/4 long DECAL SERIAL # BAR CODE BAG 50 X X 86 X.002 THICK E.L. CODE:..2WPFS, 2WPF IN03INSPECTION KIT 159A NAUTILUS WOMEN'S NAMEPLATE 2 1/2 x 9 1/4 E.L. CODE:..2PFS,2WPFS, 2MPFS, 2PF, 2WPF, 2SPF UPH09...PEC-FLY UPHOLSTERY KIT UP SEAT BACK PAD UP720...SLIPCOVER BOLT HH5 3/8 x 3 1/4 BLACK WASHER INT LOK 3/8 BLACK UP SEAT BOTTOM BOLT HH5 3/8 X 1 1/4 BLACK WASHER INT LOK 3/8 BLACK UP WRIST PAD BOLT HH5 3/8 X 1 1/4 BLACK /8" BOLT CAP WASHER PLASTIC BOLT CAP E.L. CODE:..2PF, 2WPF, 2SPF /4" WHITE HOLE PLUG 9

11 TM Kevlar Belt Adjustment Instructions Belts require tightening when a lack of resistance and uneven feel is noticed at the beginning of an exercise. USE CAUTION AROUND THE WEIGHT STACK WHEN TIGHTENING KEVLAR BELTS. To adjust belt: 1. Remove the Shielding. 2. Remove the Tethered Weight-Pin from weight stack hole. See Figure Lift top weight using the appropriate lifting mechanism - in most cases the moving arms for exercising. 4. While top weight is suspended, insert a shim between the first and second weight (two quarters will suffice). 5. Release top weight so the first stack is resting on the shim. 6. Loosen the two bolts at the end of the belt and pull through excess belting until tight. 7. Tighten belt bolts and lift top weight to remove the shim. 8. Lower the mechanism to rest on the weight stack. 9. If belt is still loose, repeat this procedure until there is no looseness at the beginning of an exercise. 10. If you experience difficulties in tightening the belts, please contact your Nautilus service professional or call NAUTILUS ( ), Parts & Service Department, for assistance. BOLTS TOP WEIGHT STACK TWO QUARTERS FOR SHIMS WEIGHT-PIN Figure LB. KG LB. KG LB. KG LB. KG LB. KG LB. KG LB. WARNING Store indoors only. Do not subject machine to high humidity or damp conditions. Warranty Information Nautilus Variable Resistance Warranty Limited Warranty Terms & General Specifications Nautilus warrants only to the original purchaser that Nautilus exercise equipment from the manufacturer is free from defects in material and workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or exchange at our plant (a) of any part or parts of the structural frame, moving weldments or weight stacks which may thus prove defective under normal use and service for the lifetime of the product from delivery to the original purchaser; (b) of any moving part or parts not otherwise disclosed within this warranty which thus may prove defective under normal use and service within one (1) year from delivery to the original purchaser; and (c) of any upholstery, pads, grips or tethered weight pin connectors which thus may prove defective under normal use and service within 120 days from delivery to the original purchaser. This warranty only applies to those parts that our own examination discloses to our satisfaction to be thus defective. This warranty is expressly in lieu of all other warranties, express or implied, including the warranties of merchantability and fitness for use and of all other obligations or liabilities on our part, and we neither assume nor authorize any other person to assume for us any other liability in connection with the sale of this NAUTILUS exercise equipment. This warranty shall not apply to this NAUTILUS exercise equipment or to any part thereof which has been subject to accident, negligence, alteration, abuse, misuse, or a lack of maintenance in accordance with our recommended maintenance instructions. We make no warranty whatsoever in respect to accessories or parts not manufactured by us and disclaim all warranties, express or implied, as to such accessories and parts. The term original purchaser, as used in this warranty, shall be deemed to mean that person or entity for whom this NAUTILUS exercise equipment is originally installed. This warranty shall apply only within the boundaries of the continental United States. NAUTILUS shall not be liable for any loss or damage, including incidental or consequential damages resulting directly or indirectly from the use or loss of use of our NAUTILUS exercise equipment. Without limiting the generality of the foregoing, this exclusion from liability embraces the purchaser s expenses for downtime or for making up downtime, damages for which the purchaser may be liable to other persons, damages to property, and injury to or death of any persons. We neither assume not authorize any person to assume for us any liability in connection with sale or use of our equipment. There are no oral agreements or warranties collateral to or affecting this agreement. 4

12 TM Contents Maintenance INSTRUCTIONS For Variable Resistance Strength Training Equipment Getting maximum results from Nautilus machines depends on proper maintenance of equipment. Welcome Congratulations on choosing Nautilus Variable Resistance strength training equipment. The addition of several exciting new features to the Nautilus line, as outlined in these instructions, ensures that your equipment will operate with little scheduled maintenance. We know this is important to you and your customers, so please take a few minutes to read the following instructions for keeping your Nautilus equipment in the best working condition. Welcome...1 Parts & Service...2 Safety/Before Exercising...2 Maintenance Schedule...2 General Maintenance...2 Cleaning...3 Lubrication...3 Hydraulic Unit Adjustment...3 Kevlar Belt Adjustment Instructions...4 Warranty Information.4 Parts & Services Regular and scheduled maintenance will prolong the life of your Nautilus equipment. Should you have to replace parts, use only genuine Nautilus parts. The Nautilus Customer Service Team invites you to call in your order for replacement parts. They re never too busy to discuss or offer a tip on your maintenance tasks. Nautilus machines -- the culmination of years of research and refinement -- are made from the highest quality materials, under exacting conditions. The quality control tag attached to each machine before shipping ensures that each unit has been thoroughly inspected to meet Nautilus' strict requirements. Should you, the owner of a Nautilus machine, need to replace any parts because of normal wear and tear, or should your machine ever need maintenance, Nautilus invites you to call our Virginia Headquarters office for information on parts and service. Nautilus has available: detailed isometric drawings on the for each machine manufactured, genuine Nautilus Upholstery Pads, Naugahyde Spray Cleaner/Conditioner recommended for Nautilus upholstery pads and TFL #50 Wet Lubricant recommended for the care of the guide rods of Nautilus selectorized resistance machines. Nautilus concern for the customer does not end with the purchase of equipment. Your comments are always welcomed. In the unlikely event that a problem occurs, call us toll free: TM Nautilus Customer Service Fax:

13 Safety 1. Supervision is necessary when the machine is used by or near children, invalids, or disabled persons. 2. Follow the instructions for specific exercises on each machine 3. Get in and out of the equipment carefully. 4. Never operate the machine without shields in place. 5. Use only Nautilus selector pins in weight stack. Never drop or insert any other object into machine opening. 6. Use this machine only as intended or described in this manual. 7. Do not operate equipment with loose or damaged parts. If machine fails to operate correctly, do not attempt to repair. Notify authorized personnel of the problems. 8. Keep hands and feet clear of weights and other moving parts when in use. Keep hands and feet only on the hand grips and foot pads provided. 9. Failure to comply with these instructions may result in personal injury. Stop exercising immediately if you experience a sharp nerve or joint pain, and seek medical advice. Before Exercising To guard against injury, all equipment users should follow these instructions. Check with your physician and get approval before beginning a training routine. Become familiar with the equipment before beginning a training routine. Always warm-up before and cool down after exercising. Move slowly during each exercise. Do not jerk or "throw" the weight. Breathe freely. Do not hold your breath while lifting or lowering weight. Hold movement arms and handles firmly, do not squeeze or grip tightly. Structure each workout to exercise the largest muscles first. Suggested routines are found in the Nautilus Total Fitness Program. Experiment to find the exact weight you need for each exercise. Select a resistance that allows you to perform eight to twelve slow repetitions. Take two seconds to lift the weight. Pause briefly, and take four seconds to lower the weight. General Maintenance Maintenance Schedule 2 EVERY 6 DAILY WEEKLY MONTHLY MONTHS Check Safety & Warning Decals Inspect Belts & Cables Spot Check Belt Spot Check Nuts and Bolts Spot Check All Pegs and Stops Examine Rotation Points Cleaning Clean Upholstery Use Nautilus Disinfectant Cleaner. Clean Surface Area Remove Dust Lubrication Lubricate and Clean Guide Rods Using TFL 50 Do not lubricate hydraulic cylinders.

14 3. SHIELD REMOVAL Nautilus 2ST machines are equipped with quickrelease shield fasteners. To remove Quick-Release shielding, gently pull shielding away from the frame. Use a proper screwdriver to remove front shielding, which is attached to the frame with screws. Cleaning 1. UPHOLSTERY CLEANING AND PROTECTION A. Keep pads free of perspiration at all times. B. Clean and disinfect upholstery at the end of each day, especially areas where perspiration and scalp oil collect. C. Clean all outside surfaces with non-abrasive, nonchlorinated household cleaners. Nautilus Disinfectant Cleaner is an effective upholstery care product. 2. CLEANING AND CARE OF PAINTED SURFACES A. Wipe painted surfaces with a damp cloth and car wax. B. Let dry and buff with a dry cloth. Detergent/ Disinfectant-Odor Counteractant Detergente/ Desinfectante y Neutralizante de Olores Keep out of Reach of Children For Industrial Use Only HEALTH FIRE REACTIVE PART NUMBER WARNING Do not lubricate MINI WEIGHTS. May cause damage and VOID WARRANTY. 3. CLEANING AND CARE OF ABS PLASTIC SHIELDING A. Clean with non-abrasive, nonchlorinated household cleaners. B. Vacuum or wipe dust from recessed areas and surfaces QUIK FILL A-33 Detergent/Disinfectant Odor Counteractant Lubrication MOVING PARTS A. To clean and lubricate guide rods, apply TFL#50 Wet Lubricant to a clean cloth then use to wipe rods. NET WT. 10 OZ. (283.5g) Do not place equipment in direct sunlight as ultra violet rays can damage shields and upholstery. STOCK NO. RG Cleans/Lubricates/Protects Homogenized/No Kerosene/No Wax Non-Toxic/Environmentally Safe Nettote/Lubrifie/Protege Produit Homogénéisé/Formule D'avant-Garde/Sans Cire Non-Toxique/Sans Effet Sur E'environnement DANGER! EXTREMELY FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED. CONTENTS UNDER PRESSURE. SEEBACK PANEL. DANGER! EXTREMEMENT INFLAMMABLE. CONTENU SOUS PRESSION. VOIR ETIQUETT AL'ENDOS. PART NUMBER *TFL 50 Wet Lubricant Recommended for Nautilus Machines. Hydraulic Unit Adjustment Note: The hydraulic unit only needs adjustment if the seat will not stay in position. 1. Remove CLEVIS and COTTER PINS. Remove CIRCULAR COTTER PINS by lifting up the wire that crosses over straight end of pin, see Figure 1. Save all PINS. 2. Use a flat blade screwdriver to gently unsnap CABLE from LEVER MECHANISM. Be careful not to break cable fitting. 3. Remove hydraulic unit from machine, loosen NUT by backing it down ROD. Hold LEVER MECHANISM and twist SHAFT until there is free play in LEVER, as shown by "B" in Figure Hold LEVER MECHANISM and twist SHAFT (as shown by "C" in Figure 3) until LEVER free play is gone, then back off 1/8 turn. Tighten NUT against LEVER MECHANISM. The NUT MUST BE PROPERLY TIGHTENED to keep hydraulic unit in adjustment. 5. Twist SHAFT slightly to realign the top and bottom clevis pin holes. 6. Use pliers to snap and lock the CABLE on to the LEVER MECHANISM. 7. Reposition the hydraulic unit on machine and insert CLEVIS and COTTER PINS. The circular COTTER PINS can be pushed into holes. 8. The HANDLE NUT should be tight against the HANDLE HOUSING, see Figure 2. The HANDLE LEVER should touch the GRIP when squeezed. If it does not touch, adjust as follows: a. Loosen the HANDLE NUT by turning counter clockwise. b. Turn the ADJUSTMENT BARREL clockwise until the HANDLE LEVER has approximately 1/4" free play. c. Tighten the HANDLE NUT against the HANDLE HOUSING. HIGH PRESSURE : DO NOT LUBRICATE ROD. SEAL DAMAGE WILL OCCUR. EYE AND INJECTION HAZARD EXISTS. Figure 1 A LEVER MECHANISM LEVER NUT CABLE B HIGH PRESSURE : DO NOT LUBRICATE ROD. SEAL DAMAGE WILL OCCUR. EYE AND INJECTION HAZARD EXISTS. CLEVIS PIN or COTTER PIN SHAFT CIRCULAR COTTER PIN HIGH PRESSURE : DO NOT LUBRICATE ROD. SEAL DAMAGE WILL OCCUR. EYE AND INJECTION HAZARD EXISTS. C HANDLE HOUSING HANDLE LEVER HANDLE NUT 1/4" free play ADJUSTMENT BARREL Figure 2 HIGH PRESSURE : DO NOT LUBRICATE ROD. SEAL DAMAGE WILL OCCUR. EYE AND INJECTION HAZARD EXISTS. 3