KEY SWITCHES. On traditional plates. On Pompadour plates (clip fixed) and Gilda plates (screw fixed)

Transcription

1 On traditional plates On ompadour plates (clip fixed) and Gilda plates (screw fixed) olycarbonate body lack glass filled polyamide shapes Mounting projecting,5 mm over faceplate surface (on traditional and Gilda plates) and 5,5 mm (on C ompadour plates) Fixing: by weldstuds or metric screws on traditional and Gilda plates, clip fixed on ompadour plates wires screwed on terminals; suggested wire sections: 0,5,5 mm² contacts with or microswitches key switches supplied with keys; personalised barrels available on request.,5 x (R.5) Wiring windows: x,5 Wiring windows: x,5 (Clip fixed on ompadour plates) 0 (Screw fixed on Gilda plates) 0 position positions Series C5 C C5 C Contacts * V remov.pos. * with spring return * V * C V remov. pos. V V V V C V C V (NA + NA/NC) C V C V (NC + NA/NC) C V C V barrel key 4 or code : CCRV (min. pcs.) Spare shapes C (Min. 0 pcs.) R5CV R5LCV R5SCV RCV Note : Replace with the code corresponding to the required version UNI EN ISO - 4-A.0 400

2 Series F frontal mounting CF CFF Frontal mounting on plates 0, 5 mm thick Fixing without screws or welded studs, by screw-cut ring Contact holder in AS, clip-fixed on cylinder body Halo in polycarbonate; the shape of the product can be changed by simply replacing the halo Halo illuminated by red 4V AC/C Wired on screw-terminals VIRO Cylinder supplied with universal keys (series ); keys can be customised. CFK 40,,5,5,5,5 CF CF CFF CFK CF,5,5 ( and F versions) (K version) COLOURS non transparent 5 Wiring windows: x NC NO C V ä NC NO C V ä claret Chagall blue grey chromium coated halo golden (only F shape) metal ( / K) CF = key contact frontal mounted = shape type F = shape type F K = shape type K = shape type = one osition, one Removing position with spring return = two ositions, one Removing position = two ositions, two Removing positions E (min. 0 pcs.) (min. 0 pcs.) RF = COLOURE halo RFM = CHROMIUM coated halo RFF = COLOURE halo RFFM = CHROMIUM coated halo RFFG = GOLEN halo = one microswitch = two microswitch V = VIRO cylinder S = universal cylinder X = single cylinder = duplication of single cylinder (min. 0 pcs.) RFK = COLOURE halo RFKM = CHROMIUM coated halo CF Add at the end of the code:.m = for Metal halo ( halo).mk = for Metal halo (K halo) V L = illuminated by 4 red s 4V AC/C (add "L" only for illuminated key contacts) COE (min. pcs.) barrel keys code : CCRV (min. pcs.) RF UNI EN ISO - 4-A.0

3 Rear body for OM and KS cylinders key switch cylinder not supplied. If incorporated into stations, only cut-out and switch body are supplied. With ody and fittings in 0% glass filled polyamide mounting on traditional plates with black shape projecting 0,5 mm over faceplate surface (on key lock version the projection depends on the type of barrel used) fixing by weldstuds or metric screws wires screwed on terminals; suggested wire sections : 0,5,5 mm² phosphorous bronze selfcleaning bridge contacts versions with indicators available KEY LOCK key switch cylinder not supplied If incorporated into stations, only cut-out and switch body are supplied. Without x (R 5) 0,5 45 5, 4 5 R 0,5 Key Number of Spring ype ype of os. remov. position contacts barrel YES K-LOCK 4 NO V 4V V 4V NO NO YES OM KS ositions Remov.pos. 0 L0 M ositions Remov.pos. L0 ositions Remov.pos. 0 L L4 M M ositions Remov.pos. L0 COE C (Insert a code in each box to obtain the COE for the required product) UNI EN ISO - 4-A.0 400

4 lack 0% glass filled polyamide shapes mounting on traditional plates projecting,5 mm over faceplate surface fixing by weldstuds or metric screws wires screwed on terminals; suggested wire sections: 0,5,5 mm² phosphorous bronze self-cleaning bridge contacts key switch supplied with universal keys (R) x (R.5),5 54 5,5 Wiring windows: x,5 40 Contacts remov.pos. * with spring return remov.pos. remov.pos. position (NO) * (NO) positions (NO) (NO + NC) 5 5 positions (NO) (NO + NC) Note : Replace with the code corresponding to the version required. barrel keys 455 code : CCR (min. pcs.) Spare shapes R5C R5LC R5SC (Min. 0 pcs.) UNI EN ISO - 4-A

5 Electronic key ELECRONIC SWICH olycarbonate body lack glass filled polyamide shapes Mounting on traditional plates projecting,5 mm over faceplate surface fixing by weldstuds or metric screws wires screwed on terminals; suggested wire sections: 0,5,5 mm² power supply V/4V AC/C indicator the system requires an electronic unit supplied with auxiliary contact that closes upon key insertion, this allows calls from different positions using only one electronic unit highly immune to outside perturbations x (R.5) ELECRONIC KEY Additional keys with the same combination can be requested (.0 combinations are available!) ELECRONIC UNI Essential component for key contact functioning dimensions x x power supply V/4V AC/C Relay output (C, NC, NO) with possibility of switching to A 4V C or V AC Relay alarm output (C, NO) with possibility of switching to A 4V C or V AC Available in SALE or NON SALE version. on different plate thicknesses. Functioning he auxiliary contact closes when inserting the key in the electronic switch; the indicator flashes on after sec. and stays on until the output relay is switched. NON SALE functioning he relay remains switched while the key is inserted. It then springs back when this is removed. he auxiliary contact is closed only while the key is inserted.. SALE functioning he relay switches when the key is inserted and remains switched even when the key is removed. he contact is closed only while the key is inserted.,5 rotection If an attempt is made to insert a different key, the alarm relay switches. his can be connected either to a siren or to an illuminated alarm. he relay remains switched for about min, during this interval the key is blocked. Electronic switch Electronic key Electronic unit Non stable Stable shape shape L shape S IE IE IE CEJ (min. 5 pcs.) CE CE Important! For additional spare keys, the electronic unit series number must be specified on the order. UNI EN ISO - 4-A