UNITED BRASS WORKS, INC.

Transcription

1 UNITED BRASS WORKS, INC. LIST PRICE SHEET INDUSTRIAL VALVES Effective Date: February 1 st 2019 Freight allowed on shipments of 750 lbs. or more HOME OFFICE & FACTORY REGIONAL SERVICE CENTER 714 South Main Street 221 Commerce Park Court Randleman, NC N. Las Vegas, NV Phone : (336) Phone: (702) Toll Free: (800) Toll Free: (800) Fax: (800) Fax: (702) ubw.com web:

2 15 1/4GATE VALVE /4 SPRING CHECK VALVE W/ /8 GATE VALVE /8 SPRING CHECK VALVE W/ /2GATE VALVE /2 SPRING CHECK VALVE W/ /4GATE VALVE /4 SPRING CHECK VALVE W/ GATE VALVE SPRING CHECK VALVE W/RU /4 GATE VALVE /4 SPRING CHECK VALVE /2 GATE VALVE /2 SPRING CHECK VALVE GATE VALVE SPRING CHECK VALVE W/RU /2 GATE VALVE LS 1/4 SPRING CHECK VALVE /2 RS GATE VALVE LS 3/8 SPRING CHECK VALVE /4 RS GATE VALVE LS 1/2 SPRING CHECK VALVE RS GATE VALVE LS 3/4 SPRING CHECK VALVE /4 RS GATE VALVE LS 1 SPRING CHECK VALVE LE /2 RS GATE VALVE LS 1 1/4 SPRING CHECK VALV RS GATE VALVE LS 1 1/2 SPRING CHECK VALV /2 BOILER DRAIN LS 2 SPRING CHECK VALVE LE /4 BOILER DRAIN T 1/4 SPRING CHECK VALVE W S1/4SOFT DISC T 3/8 SPRING CHECK VALVE W S3/8SOFT DISC T 1/2 SPRING CHECK VALVE W S1/2SOFT DISC T 3/4 SPRING CHECK VALVE W S3/4SOFT DISC T 1 SPRING CHECK VALVE W/T S 1 SOFT DISC T 1 1/4 SPRING CHECK VALVE S 1 1/4 SOFT DISC T 1 1/2 SPRING CHECK VALVE S 1 1/2 SOFT DISC T 2 SPRING CHECK VALVE W/T S 2 SOFT DISC TLS 1/4 SPRING CHECK VALVE T1/4 PTFE DISC TLS 3/8 SPRING CHECL VALVE T3/8 PTFE DISC TLS 1/2 SPRING CHECK VALVE T1/2 PTFE DISC TLS 3/4 SPRING CHECK VALVE T3/4 PTFE DISC TLS 1 SPRING CHECK VALVE L T 1 PTFE DISC TLS 1 1/4 SPRING CHECK VAL T 1 1/4 PTFE DISC TLS 1 1/2 SPRING CHECK VAL T 1 1/2 PTFE DISC TLS 2 SPRING CHECK VALVE L T 2 PTFE DISC TG 1/4 PTFE DISC GROUND WACT 1/4 WHISTLE VAL W/SS TG 3/8 PTFE DISC GROUND WACT3/8 WHISTLE VAL W/24T TG 1/2 PTFE DISC GROUND WACT1/2 WHISTLE VAL/24T TG 3/4 PTFE DISC GROUND WACT 3/4 WHISTLE VAL/LEVER TG 1 PTFE DISC GROUND WLLT 1/4 LOOP LEV WH VALVE TG 1 1/4 PTFE DISC GROUND WLLT3/8 LOOP LEV WH VAL W/ TG 1 1/2 PTFE GROUND DISC WLLT1/2 WH VAL W/PTFE DISC TG 2 PTFE DISC GROUND WT 1/4 WHISTLE VALVE /4 FULL FLOW SPRING CHEC WT 3/8 WHISTLE VALVE /8 FULL FLOW SPRING CHEC WT 1/2 WHISTLE VALVE /2 FULL FLOW SPRING CHEC WTBL 3/8 WHIST VAL W/BUTTON /4 FULL FLOW SPRING CHEC WTBL 1/2 WHIST VAL W/BUTTON FULL FLOW SPRING CHECK VC25WT 1/2 CYLINDER WHISTLE /4 FULL FLOW SPRING CH VC25WTRK 1/2" REPAIR KIT /2 FULL FLOW SPRING CH WT 3/4 WHISTLE VALVE FULL FLOW SPRING CHECK WT 1" WHISTLE VALVE S 1/4 LIGHT SPRING CHK VAL /4 STEAM VALVE L/YOKE/LE /4 SWING CHECK VALVE W/M SS 1/4 VALVE W/YOKE AND LE /8 SWING CHECK VALVE W/M NY 1/4 STEAM VALVE /2 SWING CHECK VALVE W/M NYLL 1/4 STEAM VAL.L/LEVER /4 SWING CHECK VALVE W/M Page 1

3 62 1 SWING CHECK VALVE W/MET TT 3/4 S.S. IND. W/T.GL/TE /4" SWING CHECK VALVE TTSL 1 1/4"SS IND W/TEMP S /2" SWING CHECK VALVE TTSLB 3/4 S.S.IND W/TEMP S " SWING CHK. VALVE TTSLB 1"S.S.IN W/TEMP SL G " CHECK VALVE TTSLB 1 1/4" SS IND W/BALL S 1/4 SWING CHECK VALVE W/ TTSLB 1 1/2 S.S.IN W/TEMP S 3/8 SWING CHECK VALVE W/ /8ANGLE NEEDLE VALVE S 1/2 SWING CHECK VALVE W/ /4 ANGLE NEEDLE VALVE S 3/4 SWING CHECK VALVE W/ /8ANGLE NEEDLE VALVE S 1 SWING CHECK VALVE W/RU /2 ANGLE NEEDLE VALVE S 1 1/4" SWING CHECK VALVE /4 ANGLE NEEDLE VALVE S 1 1/2" SWING CHK. VALVE /8 NEEDLE VALVE S 2" SWING CHK. VALVE /4NEEDLE VALVE T 1/4 SWING CHECK VALVE W/ /8NEEDLE VALVE T 3/8 SWING CHECK VALVE W/ /2 NEEDLE VALVE T 1/2 SWING CHECK VALVE W/ /4 NEEDLE VALVE T 3/4 SWING CHECK VALVE W/ /4 BALL VALVE T 1 SWING CHECK VALVE /8 BALL VALVE T 1 1/4" SWG.CHK.VAL /2 BALL VALVE T 1 1/2" SWING CHK. VALVE /4 BALL VALVE T 2" SWING CHK. VALVE BALL VALVE TV 1/4 PTFE DISC /4 BALL VALVE TV 3/4 PTFE DISC /2 BALL VALVE TV 2 PTFE DISC BALL VALVE V 1/4, 3/8 OR 1/2 DISC MXF 1/4 BALL VAL MALE X F V 3/4 DISC MXF 3/8 BALL VAL MALE X F V 2 DISC MXF 1/2 BALL VAL MALE X F /2" CHECK VALVE MXF 3/4 BALL VAL MALE X F /4" SWING CHECK VALVE MXF 1 BALL VAL MALE X FEM " CHECK VALVE MXF 1 1/4 BALL VAL MALE X /4" CHECK VALVE MXF 1 1/2 BALL VAL MALE X /2" CHECK VALVE MXF 2 BALL VAL MALE X FEM " CHECK VALVE SS 1/4 BALL VALVE W/S.S. B " CHECK VALVE SS 3/8 BALL VAL. W/S.S. BA H 3/4 SURE SITE FLOW INDIC SS 1/2 BALL VALVE W/S.S. B H 1 SURE SITE FLOW INDICAT SS 3/4 BALL VALVE W/S.S. B H 1 1/4 SURE SITE FLOW IND SS 1 BALL VALVE W/S.S. BAL H 1 1/2 SURE SITE FLOW IND SS 1 1/4 BALL VALVE W/S.S H 2 SURE SITE FLOW INDICAT SS 1 1/2 BALL VALVE W/SS B H 2 1/2 SURE SITE FLOW IND SS 2 BALL VALVE W/S.S. BAL BSP 3/4 SURE SIGHT IND. W/ T1/8GLOBE VAL W/PTFE DISC BSP 1 SURE SITE INDIC. W/B T1/4GLOBE VALVE W/PTFE DISC BSP 1 1/4 SURE SITE INDIC T3/8GLOBE VAL W/PTFE DISC BSP 1 1/2 S.S.IND W/BALL/S T1/2GLOBE VALVE W/PTFE DISC BSP 2 SURE SITE INDIC. W/B T3/4GLOBE VALVE W/PTFE DISC BSP 2 1/2 SURE SITE INDIC T1 GLOBE VALVE W/PTFE DISC HB 3/4 SURE SITE INDIC. W/ T 1 1/4 GL VAL W/PTFE DISC HB 1 SURE SITE INDIC. W/AC T 1 1/2 GL VAL W/PTFE DISC HB 1 1/4 SURE SITE INDIC T2 GLOBE VALVE W/PTFE DISC HB 1 1/2 SURE SITE INDIC /4 SWING CHECK VALVE HB 2 SURE SITE INDIC. W/AC /8 SWING CHECK VALVE Page 2

4 99 1/2 SWING CHECK VALVE MM 1 MM GLOBE VALVE /4 SWING CHECK VALVE MM 1 1/4MM GLOBE VALVE SWING CHECK VALVE MM 1 1/2MM GLOBE VALVE /4 SWING CHECK VALV MM 2MM GLOBE VALVE /2 SWING CHECK VALV SD 1/4 DISC SWING CHECK VALVE SD 3/8 DISC S 1/4 SWING CHECK W/99SD SDU 1/2 DISC S 3/8 SWING CHECK W/99SD SD 3/4 DISC S 1/2 SWING CHECK W/99SD SDU 1 DISC S 3/4 SWING CHECK W/99SD SDU 1 1/4 DISC S 1 SWING CHECK W/99SD SDU 1 1/2 DISC S 1 1/4 SWING CHECK/99SD SD 2 DISC S 1 1/2 SWING CHECK/99SD TD 1/4 DISC S 2 SWING CHECK W/99SD TD 3/8 DISC T 1/4 SWING CHECK W/99TD TD 1/2 DISC T 3/8 SWING CHECK W/99TD TD 3/4 DISC T 1/2 SWING CHECK W/99TD TD 1 DISC T 3/4 SWING CHECK W/62TV TD 1 1/4 DISC T 1 SWING CHECK W/99TD TD 1 1/2 DISC T 1 1/4 SWING CK W/99TD TD 2 DISC T 1 1/2 SWING CK W/99TD S 1/4 ANGLE VALVE W/125S T 2 SWING CHECK W/99TD S 3/8 ANGLE VALVE W/125S SD 1/4 DISC SUL 1/2" ANGLE VALVE SD 1/2 DISC SUL 3/4" ANGLE VALVE SD 1 DISC SUL 1" ANGLE VALVE SD 1 1/4 DISC SUL 1 1/4" ANGLE VALVE SD 1 1/2 DISC SUL 1 1/2 ANGLE VALVE SD 2 DISC SUL 2" ANGLE VALVE TD 1/4 PTFE DISC T 1/4 ANGLE VALVE W/125T TD 1/2 PTFE DISC T 3/8 ANGLE VALVE W/125T TD 1 PTFE DISC T 1/2 ANGLE VALVE W/125T TD 1 1/4 PTFE DISC T 3/4 ANGLE VALVE W/125T TD 1 1/2 PTFE DISC T 1 ANGLE VALVE W/125TD TD 2 PTFE DISC T 1 1/4 ANGLE VALVE W/ S 1/4 GLOBE VALVE W/125S T 1 1/2 ANGLE VALVE W/ S 3/8" GLOBE VALVE T 2 ANGLE VALVE W/125TD SUL 1/2" GLOBE VALVE MM 1/4 MM ANGLE VALVE SUL 3/4" GLOBE VALVE MM 3/8 MM ANGLE VALVE SUL 1" GLOBE VALVE MM 1/2 MM ANGLE VALVE SUL 1 1/4" GLOBE VALVE MM 3/4 MM ANGLE VALVE SUL 1 1/2" GLOBE VALVE MM 1 MM ANGLE VALVE SUL 2" GLOBE VALVE MM 1 1/4 ANGLE VALVE T 1/4 GLOBE VALVE W/125T MM 1 1/2 ANGLE VALVE T 3/8 GLOBE VALVE W/125T MM 2 MM ANGLE VALVE T 1/2 GLOBE VALVE W/125T /4" STR VALVE (50 MESH) T 3/4 GLOBE VALVE W/125T /4 24 MESH STNR STL P T 1 GLOBE VALVE W/125TD /4 50 MESH STNR STL P T 1 1/4 GLOBE VAL W/125T /4 100 MESH STR STL P T 1 1/2 GLOBE VAL W/125T /8 24 MESH STNR STL P T 2 GLOBE VALVE W/125TD /8 50 MESH STNR STL P MM 1/4MM GLOBE VALVE /8 100 MESH STR STL P MM 3/8MM GLOBE VALVE /2 24 MESH STNR STL P MM 1/2 MM GLOBE VALVE /2 50 MESH STNR STL P MM 3/4MM GLOBE VALVE /2 100 MESH STNR ST P Page 3

5 200 3/4 24 MESH STNR STL P WBP 1 24 MESH STNR W/BP /4 50 MESH STR STL PG WBP 1 50 MESH STR W/BP /4 100 MESH STR STL P WBP MESH STNR W/BP MESH STNR STL PLU WBP 1 1/4 24 STRAINER W/B MESH STNR STL PL WBP 11/4 50 MESH ST RB P MESH STR STL PL WBP 11/4 100 MESH ST BR /4 24 MESH STR ST P WBP 1 1/2 24 MESH STNR/BP /4 50 MESH STNR STL PL WBP 11/2 50 MESH ST BR P /4 100 MESH STR STL PL WBP 11/2 100 MESH ST BR /2 24 MESH STR ST P WBP 2 24 MESH STNR/BP /2 50 MESH STNR ST PL WBP 2 50 MESH ST BR PL /2 100 MESH STR STL PL WBP MESH ST BR PL MESH STNR STL PLG WSC1/4 24 MESH STNR SLD C MESH STNR STL PL WSC1/4 50 MESH STNR SLD C MESH STR STL PL WSC1/4 100 MESH STR SLD C BV 1/4 24 MESH STRAINER W WSC 3/8 24 MESH ST SLD CA BV 1/4 50 MSH.STNR. W/3/ WSC 3/8 50 MESH ST SLD CA BV 1/4 100 MESH STR W/3/ WSC3/8 100 MESH STR SLD C BV 3/8 24 MESH STRAINER W WSC1/2 24 MESH STNR SLD C BV 3/8 50 MESH STNR W/3/ WSC1/2 50 MESH STNR SLD C BV 3/8 100 MSH. STNR.W/3/ WSC1/2 100 MESH STR SLD C BV 1/2 24 MESH STRAINER W WSC3/4 24 MESH STNR SLD C BV 1/2 50 MSH.STNR.W/BALL WSC 3/4 50 MESH STNR SLD BV 1/2-100 MESH STNR.W/B WSC3/4 100 MESH STR SLD C BV 3/4 24 MESH STRAINER W N 1SEAT TOOL BV 3/4 50 MESH STNR.W/3/ UT 1" "Y" VALVE BV 3/4 100 MSH.STNR.W/BAL UT 1 1/4" "Y" VALVE BV 1 24 MESH STRAINER W/B UT 1 1/2" "Y" VALVE BV 1 50 MESH STNR W/3/4 B UT 2" "Y" VALVE BV MSH.STNR.W/BALL U 1" "Y" VALVE BV 1 1/4 24 MESH STRAINER U 1 1/4" "Y" VALVE BV 1 1/4 50 STNR W/3/4 BA U 1 1/2" "Y" VALVE BV 1 1/4 100 MSH.STNR.W/B U 2" "Y" VALVE BV1 1/2 24 MESH STRAINER T 1/2" MSS SPR SHK VALVE BV 1-1/2 50 MESH STRAIN.W T 3/4" MSS SPR CHK VALVE BV 1 1/2 100 MSH.STNR.W/ T 1" MSS SPR. CHK. VALVE BV 2 24 MESH STRAINER W/B T 1 1/4 MSS SPR. CHK. VAL BV 2 50 MESH STNR W/3/4 B T 1 1/2 MSS SPR.CHK VALVE BV 2"100 MSH.STNR.W/3/4 B T 2 MSS SPR CHK VALVE WBP1/4 24 MESH STNR BR PL TLS 1/2 MSS CHK VAL L/SPR WBP1/4 50 MESH STNR BR PL TLS 3/4 MSS CHK VAL L/SPR WBP1/4 100 MESH STNR BR P TLS 1" MSS CHK VAL L/SPR WBP 3/8 24 MESH STR BR P TLS 1 1/4 MSS CHK VAL L/S WBP3/8 50 MESH STR BRS P TLS 1 1/2 MSS CHK. VAL L/ WBP 3/8 100 MESH STR BRS TLS 2 MSS CHK VAL L/SPR WBP1/2 24 MESH STNR BRS P /2" CONTINUOUS BLOW OFF WBP1/2 50 MESH STNR BRS P /4" CONTINUOUS BLOW OFF WBP1/2 100 MESH STNR BR P /2" CONTINUOUS BLOW OFF WBP3/4 24 MESH STNR BR PL /4" CONTINUOUS BLOW OFF WBP 3/4 50 MESH STR STL T 1/2" MSS GLOBE VALVE WBP3/4 100 MESH STR BR PL T 3/4" MSS GLOBE VAL Page 4

6 381T 1" MSS GLOBE VALVE VT GAUGE GLASS WASHER VIT T 1 1/4" MSS GLOBE VAL SHORT GLASS ROD /SE T 1 1/2 MSS GLOBE VAL V 1/8 DRAIN COCK W/VIBRA T 2 MSS CLOBE VAL C 8 HI-PRESS GLASS/DZ " KNIFE GATE VALVE C 8 1/2 HI-PRESS GLASS/DZ /4" KNIFE GATE C 9 HI-PRESS.GLASS/DZ /2" KNIFE GATE VALVE C 9 1/4 HI-PRESS GLS/DZ " KNIFE GATE VALVE C 9 1/2 HI-PRES.GLS/D " KNIFE GATE VALVE C10 HI-PRESS.GLASS/DZ /4" KNIFE GATE VALVE C 10 1/4HI-PRESS.GL D /2" KNIFE GATE VALVE C 10 1/2 HI-PRES.GL D " KNIFE GATE VALVE C11 HI-PRESS.GLASS/DZ " KNIFE GATE VALVE C 11 1/2HI-PRESS.GL D /4" KNIFE GATE VALVE C12"HI-PRESS.GLS.DOZ /2" KNIFE GATE VALVE C 14 HI-PRESS.GL/DZ " KNIFE GATE VALVE UPPER EXPANSION FIXTURE " KNIFE GATE VALVE LOWER EXPANSION FIXTUR /4" KNIFE GATE VALVE /2 LOWER FIXTURE LONG S /2" KNIFE GATE VALVE S 1/2 LOWER FIXTURE LONG " KNIFE GATE VALVE A 1/2 LOWER FIXTURE SHORT /2" PTFE TAPE AXF 1/2 LOWER FIXTURE SHO /4" PTFE TAPE AS 1/2 LOWER FIXTURE SHOR /2 50 LB TRAP SHORT SHANK SET W/PLAS A 3/4 125 LB TRAP LONG SHANK SET W/BALL B 3/4 50 LB TRAP SHORT SHANK SET W/BALL /2 125 LB TRAP GAG.SET LONG L/BALL CK AL COVER ASSEMBLY 50LB LONG SHANK SET W/BALL CN TRAP GASKET (NEW) PW LG.SHK.SET W/BALL CK F COVER ASSEMBLY 125 LB SHORT SHANK SET W/BALL M STRAINER PLUG ASSEMBLY PW SHT.SK.SET W/B.CK.W/ /4 100 SAFETY VALVE LONG SHANK SET /4 125 SAFETY VALVE SHORT SHANK SET /4 150LB SAFETY VALV EXPANSION FIXTURE/SET LB SAFETY VALVE /2 GA.ASM/SET/L.SHNK/ LB SAFETY VALVE /2 GAUGE ASSEMBLY SET SAFETY VALVE 150LB /2" GAUGE FIXTURE SET /4 100LB SAFETY VAL SHORT SHANK SET W/BALL /4 125LB SAFETY VAL LONG SHANK SET W/BALL /4 150 SAFETY VALVE GAGE ASSEM.SET /2 100 SAFETY VALVE GAUGE ASSM.SETW/BAL/L/ /2 125LB SAFETY VAL GA.ASM.SET W/BALL/946F /2 150 SAFETY VALVE GAGE ASM SET W/80 MXF/ LB SAFETY VALVE HP GAUGE FIXTURE SET LB SAFETY VALVE A31 1/4 AIR REDUCING VALV # SAFETY VALVE A31S 1/4 AIR REDUCING VAL /2" UPPER FIXTURE A31 3/8 AIR REDUCING VALV /2" LOWER FIXTURE A31S 3/8 AIR REDUCING VAL /2 UPPER FIXTURE LONG S L 1/2 LONG SHANK TRICOCK S 1/2 UPPER FIXTURE LONG P 1/2 SHORT SHANK TRICOCK A 1/2 UPPER FIXTURE SHORT /4 PETCOCK AS 1/2 UPPER FIXTURE SHOR A 1/8 PETCOCK M X F L GLASS WASHER NUT AI SYPHON IRON ANGLE M STEEL WASHER CHROMATE B SYPHON BRASS RUBBER WASHERS FOR GLASS I SYPHON IRON Page 5

7 973 SHUT OFF VALVE DIA GASK / GAGE /4 PIST/CYL / GAGE /8 PIST/CYL / GAGE /2 3/4 PIST/CYL / GAGE PIST/CYL / GAGE /4 PIST/CYL B 2 1/2 BACK CONNECT GAG /2 PIST/CYL / ST RED VA PIST/CYL / ST RED VA /4 3/8 STRAINER K 1/2 INSTALLATION KIT /2 3/4 STRAINER / ST RED VA STRAINER / ST RED VA /4 1 1/2 STRAINER K 3/4 INSTALLATION KIT STRAINER ST RED VA /4 3/8 PLUG GASK ST RED VA /2 3/4 PLUG GASK K 1 INSTALLATION KIT TO 1 1/2 PLUG GASK / ST RED VA PLUG GASK / ST RED VA / PR SP K 1 1/4 INSTALLATION KIT / PR sp / ST RED VA / PRESSURE SPRI / ST RED VA / PR SP K 1 1/2 INSTALLATION KIT / PR SPRING ST RED VA /2 3/ PR SP ST RED VA PR SP K 2 INSTALLATION KIT /4 1 1/ PR S / AIR WATER TO 1 1/ PR S / AIR/WATER PR SP AIR/WATER PR SP / AIR WATER / PR SP / AIR/WATER /4 3/8 PISTON SP AIR/WATER /2 TO 1 PISTON SP /4 DIA/STM /4 1 1/2 PISTON SP /8 DIA/STM RS45 4 X 5 FLOAT BALL /2 DIA/STM/3 PER SET RS50 5 FLOAT BALL /4 DIA/STM /2 FLOAT VALVE DIA/STM FU 1/2 FULTON FLOAT VAL /4 1 1/2 DIA/STM FLOAT BALL ROD DIA/STM /4 FLOAT VALVE /4 DIA/AIR FU 3/4 FULTON FLOAT VAL /8 DIA/AIR /2 DIA/AIR /4 DIA/AIR DIA/AIR /4 1 1/2 DIA/AIR DIA/AIR /4 DIA GASK /8 DIA GASK /2 DIA GASK /4 DIA GASK DIA GASK /4 1 1/2 DIA GASK Page 6

8 TERMS AND CONDITIONS OF SALE 1. United Brass Works, Inc. agrees to sell products pursuant to its standard terms and conditions, unless it agrees to other terms in writing signed by both parties. The printed provisions on the reverse of any customer Purchase Order or on any other form supplied unilaterally by any customer shall be deemed rejected by United Brass Works, Inc. and shall be void and of no effect. 2. Where shown, valves will be shipped in multiples of packaged quantities. Order quantities will be changed to coincide with multiples of packaged quantities. 3. All prices are listed net, FOB, Randleman, North Carolina with freight allowed in Bronze and/or Iron Valves of 750 lbs. or more to all points in the U.S. (excluding Alaska and Hawaii) and to the nearest port of embarkation for foreign shipments (including Alaska and Hawaii), on all orders and back orders United Brass responsibility terminates upon receipt of a bill of lading by the carrier. 4. Minimum merchandise invoice amount shall be $50.00 per order. All orders received for merchandise that totals to less than $50.00 shall be invoiced at the minimum charge. 5. Prices are subject to change without notice and orders will be invoiced at price in effect at time of shipment. 6. Terms are thirty days net, provided credit is approved. Where no credit information is available, shipments will be made COD or sight draft Charge accounts are extended to businesses, institutions, and organizations only, not to individuals. To qualify for open account privileges, an account must be rated satisfactory in Dun & Bradstreet or supply names of three commercial vendors who have extended credit. Allow four weeks to establish account when references other than a satisfactory Dun & Bradstreet rating are furnished. 7. No material shall be accepted for credit or replacement without prior return authorization being obtained and an RMA number being issued for the material. All materials must be returned prepaid. 8. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. During the first ninety (90) days after date of delivery of this product to the original purchaser. United Brass Works, Inc., will remedy any defect or malfunction found therein. However, the original purchaser shall be responsible for all labor costs. United Brass Works, Inc., extends this limited 90-Day Warranty to the original purchaser of this product only, and not to any subsequent transferees. UNITED BRASS WORKS, INC., SHALL NOT BE LIABLE FOR COMMERCIAL CONSEQUENTIAL DAMAGES SUCH AS PROPERTY DAMAGES AND INCIDENTAL EXPENSES RESULTING FROM BREACH OF THIS WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. 9. All United Brass merchandise may be returned for credit if unused and in new condition after receipt of prior authorization within 60 days of purchase. Merchandise will not be accepted for return beyond 60 days after purchase. (This does not apply to defective merchandise.) A 15% restocking charge will be levied unless United Brass Works was in error. Please call for Return Material Authorization number before returning merchandise. 10. There will be a 15% surcharge on all merchandise drop shipped unless the invoice amount exceeds $ All claims for short shipments must be made within 10 days of receipt of material. Claims made after 10 days of receipt will not be honored. 12. United Brass Works, Inc., reserves the right to ship orders by means we deem most expedient and least expensive unless your order contains specific instructions and provided these instructions do not entail additional expense for the company. 13. All cancellations must be in writing and any expense incurred processing your order prior to the cancellation shall be invoiced to you. 14. All telephone and telegraph orders must be confirmed in writing. 15. All orders taken by salesmen are subject to approval by home office. 16. United Brass Works, Inc., reserves the right to make partial shipment if such is necessary, unless order has specific instruction to the contrary. 17. All delivery dates are approximate and United Brass Works, Inc., is not responsible for failure to meet dates specified. This warranty does not apply to conditions resulting from improper installation, inadequate maintenance, misuse, abuse, accident or alteration. This is the only warranty applicable to products manufactured by United Brass Works, Inc., and the Company neither assumes nor authorizes anyone to assume for it any other obligation or liability in connection with such products. ANY IMPLIED WARRANTIES OR MERCHANT-ABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED INDURATION TO THE PERIOD OF THE ABOVE 90-DAY WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.