2014 Law Enforcement Products

Transcription

1 2014 Law Enforcement Products

2 Law Enforcement Products Everything you need to equip your fleet to meet the tough demands of the job Storage & Organization Products Gun Racks Prisoner Transport Products Electronic Vehicle Protection Products Exterior Vehicle Protection Products

3 Index Prisoner Transport Products Pro-cell Prisoner Transport System Space Saver Plus Prisoner Transport Partitions...6 Universal Prisoner Transport Partitions...7 Partition Options...8 Prisoner Transport Lighting...8 Transport Seats...9 Floor Pans...9 Window Armor...10 Rear Door Panels...10 Cargo Barriers...11 Electronic Vehicle Protection Products Front Passenger, AOI Airbag On/off Control Switches...12 Side Curtain, AOI Airbag On/off Control Switches...13 Safestop Vehicle Anti-theft System Exterior Vehicle Protection Products Universal Push Bumpers...16 Universal LED Push Bumpers...16 XPush Bumpers...17 Ballistic Door Panels...18 Skid Plates...18 Rear Window Guards...19 Organization & Storage Products Cargo Cabinets...20 Weapon/Storage Drawers...21 Trunk & Cargo Area Organizers...22 Seat Organizers...23 Trunk Trays...23 Gun Racks Choosing the Right Gun Rack...24 Partition Mount Gun Racks...25 Self Supporting Gun Racks...26 Roof Mounted Gun Racks...26 Motorcycle Gun Racks...27 Special Purpose Gun Racks...27 STRONG RELIABLE SECURE Law Enforcement Products

4 Pro-cell Prisoner Transport Systems P1000 ½ Cage, Single Prisoner Transport System Full safety benefits of Prisoner Transport Partition, does not compromise driver s range of space, full seat travel and recline Mount single or dual weapons with a G6300 Series Pro-cell Weapon Mount (see below) Clear, Polycarbonate Divider compartmentalizes the prisoner area and provides additional storage space behind the driver s seat P1500 ½ Cage, Single Prisoner Transport System with Full Roll Bar Full safety benefits of Prisoner Transport Partition, does not compromise driver s range of space, full seat travel and adequate recline Benefit from full roll bar protection Mount single or dual weapons with a G6300 Series Pro-cell Weapon Mount (see below) Clear, Polycarbonate Divider compartmentalizes the prisoner area and provides additional storage space behind the driver s seat P1826 Full Cage, Dual Prisoner Transport System Full safety benefits of a prisoner transport partition, does not compromise driver s range of space, full seat travel and adequate recline Eliminate the need for a second transport vehicle when transporting two prisoners, keeps them completely confined and separated from one another Ideal for male/female, adult/juvenile, domestic disputes, and other transports of two people Center placed window allows ventilation to both sides of the back seat Mount single weapons with a Horizontal Partition Mount or single/dual weapons with a Vertical Partition Recessed Mount (see below) Gun Racks are available for all Pro-cell Systems Single Weapon Mount for Half Cage Pro-cells Dual Weapon Mount for Half Cage Pro-cells Single or Dual Vertical Weapon Mount for Full Cage Pro-cells Single Horizontal Weapon Mount for Full Cage Pro-cells Prisoner Transport Products 4

5 Pro gard s Pro-cell Prisoner Transport Systems offer the perfect solution for fleets who want to achieve total prisoner containment during transports. Choose from three designs offering either single or dual prisoner transport confinement. Our Pro-cell systems combine a rigid, polycarbonate divider to full width seats and floor pans to eliminate potential areas for contraband to be stashed. The divider mounts firmly to your choice of partition (see left) to minimize the containment area to one side of the back seat, greatly diminishing a prisoners range of motion. Floor Pans enclose the foot well, eliminating potential areas to hide contraband P1000 ½ Cage, Single Prisoner Transport System shown in a Dodge Charger Seat belt pucks/grommets provide a barrier around factory seat belts to eliminate crevices for stashing contraband or other evidence Clear ⅜ Polycarbonate Divider provides a solid barrier down the center of the rear seat Divider mounts to and matches contours of Seat and Floor Pan to eliminate potential areas to stash contraband ABS Seats and Floor Pans can be installed to drain through the floor board for easy cleaning and sanitizing Seats and Floor Pans fit snug against one another to eliminate potential areas where contraband might be hidden Rear Door Panels eliminate access to window controls and door latches from the inside Window Armor protects side windows from being kicked out or shattered from the inside Optional Pro cell single or dual weapon mount Gun Racks are available for all Pro cell Systems (see lower left) Each system comes complete with: (1) Prisoner Transport Partition, (1) Set of Extension Panels/Seat Protectors, (1) Prisoner Transport Seat**, **Cargo Barriers for SUVs (1) Floor Pan*, (1) Clear, Polycarbonate Seat Divider, (1) Pair, Window Armor, (1) Pair, Rear Door Panels Choose from three styles of Partitions Seat & Floor Pan* Polycarbonate Divider Pair Window Armor & ABS Door Panels ** SUV Seats come with a Clear Polycarbonate Window Cargo Barrier * Tahoe does not require a floor Pan Prisoner Transport Products 5

6 Space Saver Plus Prisoner Transport Partitions Provides more clearance for loading and unloading prisoners and increased legroom during transport Same familiar mounting style of our Universal Partitions that fleets have used for years Patented Airbag flexible wings yield against the force of a side curtain airbag yet, provide resistance in limiting access to the front passenger area Rigid wings available, must be used with AOI Airbag On/off Control Switches if vehicle has side curtain airbags (see page 13 for more information) Choose from up to nine different window configurations (shown on page 8) Sturdy, 14 gauge steel construction provides ample resistance against even the most aggressive transports Coated foam padding conforms to and protects the headliner against rubbing Comes with Recessed Panel and SSP Bucket Seat Protectors Optional Gun Racks are available for dual or single weapons, (shown on page 25) Driver seat maintains full travel and adequate recline *Contact a Pro gard customer service representative for vehicle availability Safety has always been Pro gard s first concern when developing products for your fleet. When it comes to prisoner transport, we realize there are two key factors to consider, officer safety from the prisoner and prisoner safety during the transport. Times have changed and so have vehicles, cabin space has become more condensed which, means less leg room for both prisoner and officer. The unique design of our Space Saver Plus Partitions offers the best for both worlds with it s inset Bucket Seat Protector. The partition mounting maintains the same full travel and adequet recline of the driver s seat of our partitions that fleets have used for years all-the-while, providing additional space behind the passenger seat, for prisoner leg room. Shown in a Ford PI Sedan with OEM Seat Shown in a Ford PI Sedan with Transport Seat & Floor Pan to maximize space Prisoner Transport Products 6

7 Universal Prisoner Transport Partitions Patented Airbag flexible wings yield against the force of a side curtain airbag yet, provide resistance in limiting access to the front passenger area Rigid wings available, must be used with AOI Airbag On/off Control Switches if vehicle has side curtain airbags (see page 13 for more information) Driver seat maintains full travel and adequate recline Choose from up to nine different window configurations (shown on page 8) Optional Recessed Panels for mounting Vertical Gun Racks Universal design can be moved from one ppv to another with purchase of a transfer kit, helps reduce long term replacement costs* Optional Bucket Seat and Recessed Panel or Full Width Extension Panels protect seat backs and eliminate places to stash contraband Coated foam padding conforms to and protects the headliner against rubbing Sturdy, 14 gauge steel construction provides ample resistance against even the most aggressive transports Optional Gun Racks are available for dual or single weapons, (shown on page 25) *Contact a Pro gard customer service representative for vehicle transfer compatibility Nothing is more important than maintaining control over a prisoner during transport. All of our Prisoner Transport Partitions are designed to give your officers peace of mind about prisoner confinement without compromising their comfort. The rugged steel construction provides a secure barrier between the prisoner transport and officer areas that withstands even the most aggressive assaults. Pro gard offers both a Universal Sedan Partition and a Universal SUV Partition that fit all Police Package Vehicles*. These partitions are designed to be transferable from one vehicle to another with the simple addition of a transfer kit. Shown with Recessed Panel & Bucket Seat Protectors in Ford PI Utility Shown with Full Width Extension Panel in a Ford PI Sedan Prisoner Transport Products 7

8 Partition Options Partition Window Configurations (for Space Saver Plus and Universal Partitions)* 13 Vented Stationary Polycarbonate Window 00 Passenger ½ Sliding Polycarbonate Window 04 Center Sliding Polycarbonate Window 02 Stationary Polycarbonate Window 17 ½ Slider Polycarbonate Window w/ Expanded Metal Insert 14 Polycarbonate Center Sliding Window w/ Metal Insert 05 Full Wire Window 12 ½ Polycarbonate ½ Expanded Metal Window 16 Stationary Polycarbonate Window & Center Metal Insert Durable Polycarbonate windows are easy to clean *Shown from driver s perspective 14 Anodized aluminum window frames are easy to clean and resist corrosion 16 Ergonomic window latches are easy to open from driver s position Partition Gun Rack Options (see pages for more details) Our Gun Racks offer the perfect mounting solutions for any fleet utilizing partitions. Weapons are out of the way for normal duty yet within easy reach when the situations demands. Horizontal Single Mounts Compact Mounts for unique fitments Vertical Dual or Single Mount Gun Racks for Recessed Panels Prisoner Transport Lighting Lightweight, low-profile design, no cut-outs required 15 lead wire and three way rocker switch included Three-way Rocker switch: Red/Off/White 250 lumen white output / 140 lumen red output Minimal.31 amp draw Flange mount included Two-way lights, sold in pairs White light shown in a Ford PI Utility Red light shown in a Ford PI Utility Illuminating the prisoner transport area is simple with our easy to install, LED lighting. Low-profile, two-way lights provide either brilliant white light for harsh contrast lighting or ambient red lighting that won t irritate eyes which have grown accustom to darkness. Prisoner Transport Products 8

9 Prisoner Transport Seats & Floor Pans Each product is molded from one continuous piece of ABS for added durability Molded from high strength ABS that resists the daily abuse of transporting prisoners Increased foot room for better control when placing prisoners Simple, routine cleaning maintains pathogen control Seat belt pucks/grommets enclose the factory seat belt, eliminating potential spaces for stashing contraband Our Straight Back Seat design features the traditional seat style that agencies have relied on for years Our Contour Back* Seat design provides increased comfort for prisoners when behind the back cuffing procedures are necessary SUV seats are sold with/require a Cargo Barrier (see page 11 for more details about Cargo Barriers) Drain hole grommets are provided with every floor pan to provide a watertight seal between the pan and undercarriage that allow for easy drainage when cleaning the prisoner transport area *Contact a Pro gard customer service representative for vehicle availability Pro gard s Transport Seats are designed to work seamlessly with our Floor Pans to provide the maximum protection against stashing contraband/evidence by eliminating gaps between the seat and floor board With the transport areas shrinking in newer model Police Package Vehicles, Pro gard s Prisoner Transport Seats increase leg room for passengers in the rear seating area significantly over OEM seats and other seats in the market. Molded from sturdy ABS plastic, our seats and floor pans fit the curves and contours of vehicles to eliminate potential gaps and crevices where contraband might otherwise be hidden. The combination of our seats with our floor pans provides a quick and easy means for cleaning and sanitizing the transport area. Clean-up can be as simple as washing out with a hose and allowing water to run out through strategically placed drains in the floor board. These easy to clean seats alleviate worries of pathogen control with regular cleaning. Shown in a Ford PI Sedan Shown in a Dodge Charger Shown in a Chevrolet Tahoe Prisoner Transport Products 9

10 Window Armor & Rear Door Panels *Contact a Pro gard customer service representative for vehicle availability Stop the costly cycle of replacing rear-side windows because of prisoner destruction Polycarbonate Window Armor* is reinforced with a steel frame to prohibit flexing yet, maintains a less aggressive look Rugged Steel Bars* provide maximum protection Window Armor is quick and easy to install Steel Bars for OEM Door Panel shown on a Ford PI Sedan Steel Bars with ABS Door Panel shown on a Chevrolet Caprice Choose betweein Armor types, for use with OEM door panels or with Pro gard s smooth surface, ABS Rear Door Panels ABS Rear Door Panels eliminate access to door latches, locks, and window controls from inside the vehicle Our ABS Rear Door Panels eliminate potential leverage points that are present with OEM style panels Will not interfere with side curtain airbag deployment ABS Door Panels are a smooth easy to clean surface Pro gard s Window Armor is designed to withstand the force of a prison trying to kick their way out of the vehicle. Choose from steel bars or reinforced polycarbonate panels*. Our Rear Door Panels eliminate prisoner access to window controls and door latches from inside the vehicle. Thus, further preventing the prisoner s ability to escape from vehicle confinement. Polycarbonate for OEM Door Panel shown on a Dodge Charger Polycarboante with ABS Door Panel shown on a Chevrolet Tahoe Prisoner Transport Products 10

11 Cargo Barriers The open interior of SUVs can create potential hazards for officers carrying loose equipment. Pro gard s rugged, steel Cargo Barriers offer a safe means to secure the cargo area of your SUV from the passenger compartment. Wire Screen Window shown in a Ford PI Utility Choose from our two window styles. Our Clear, Polycarbonate Window option eliminates prisoner access to the rear of the vehicle where contraband might otherwise be stashed. If containment is not an issue, our Wire Screen Window option allows for regular airflow to the rear of the vehicle. Mounts to both the floor and roof, utilizing pre-existing OEM holes for an easier installation Protects officers and prisoners from loose equipment that might otherwise slide forward from the rear of the vehicle Mounts outside of the side curtain airbag deployment zones Perfect mounting platform for electronics equipment Our Prisoner Transport Seats mount to our Cargo Barriers in all SUV applications (see page 9 for more information about our Prisoner Transport Seats) Polycarbonate Window shown in a Chevrolet Tahoe Pro gard s Cargo Barriers are the perfect companion to segment the area if you are using a Cargo Cabinet, Weapon/Storage Drawer, or other storage unit in the back of your SUV Rugged steel panels are easy to clean and resist corrosion 7 Gauge, Steel Wire Window ¼ Polycarbonate Window Prisoner Transport Products 11

12 AOI Front Passenger Airbag On/off Control Switches Pro gard s patented, highly visible, LED telltale light clearly indicates if airbag protection is turned off Our patented design switch works with both dual and single stage airbags Small profile box fits easily under the dash or other confined spaces Each switch is tested to 100,000 cycles to ensure quality and reliability Pro gard s AOI Airbag On/off Control Switches meet and exceed all federal requirements Front Passenger Airbag On/off Switch provides means to shut off airbags when radar, cameras, LPR systems, and other aftermarket equipment is mounted in the airbag deployment zone OEM Plug-and-Play adaptors for police package vehicles make for quick and easy installation Optional remote status lights are available when the switch is mounted in glove boxes, under the dash, or other invisible locations thus, keeping the switch in compliance with NHTSA regulations for telltale light visibility Key operated switches can be turned off to protect equipment or on to protect passengers as needed (airbags should remain turned off anytime equipment is mounted in the airbag deployment zone) NHTSA will allow vehicles used in emergency situations to install airbag on/off switches Many municipal insurance plans already compensate for airbag on/off controls Optional Remote Status Light Eliminate Conflicts with Aftermarket Equipment Aftermarket surveillance equipment has become a mainstay inorder for officers to perform their regular duties. With limited dash space, equipment can often be found mounted within the passenger airbag s deployment zone. Consider though, should there be an airbag deployment, what happens to this equipment? It can and usually does become dangerous projectile objects. Installing a front passenger AOI Airbag On/off Control Switch can eliminate this potential hazard, not only protecting your officers but also, expensive equipment and possible bystanders. The sheer force of an airbag deployment is extremely powerful. So much so, it can cause objects in its deployment path to become dangerous projectiles. Pro gard s patented, Airbag On/off Control Switches provide officers the security they need to do their job without the fear of conflicts between the airbag and aftermarket equipment mounted in the front dash area. Our airbag control switches also offer fleet managers and installers the peace of mind to know that damage to this expensive equipment can be greatly minimized by the absence of an airbag deployment. Electronic Protection Products 12

13 AOI Side Curtain Airbag On/off Control Switches Our patented Side Curtain Airbag On/off Control Switches offer fleets the ability to continue utilizing rigid wing partition filler panels without fear of conflicts in an airbag deployment. These switches also allow fleets to continue using roof mounted gun racks that are normally mounted within the airbag s deployment zone, eliminating the chance that a conflict might occur. Eliminate Conflicts with ANY Roof Mounted Gun Rack Side curtain airbags may deploy from the area where roof mounted gun racks connect to the vehicle s headliner. In such cases, should an airbag deployment occur, the consequences could be catastrophic if a weapon or part of the gun rack is transformed into a projectile object. This gun mounting style can be safely utilized when an AOI Airbag On/off Switch is used to shut off the side curtain airbags. (See page 26 for more information about our Pro-clamp, Roof Mount Gun Rack.) Eliminate Conflicts with ANY Rigid Wing Partition Rigid wing partition panels are not designed to give easily under the force of an airbag deployment. It is possible that they can snap loose (or into many pieces) and become projectile objects in the event of an airbag deployment. By shutting off the side curtain airbags fleets, who prefer this partition design, can still use their preferred equipment style without fear of an airbag deployment. (See pages 6-8 for more information about our Prisoner Transport Partitions.) Many municipal insurance plans already compensate for airbag on/ off controls Small profile box fits easily under the dash or other confined spaces Pro gard s patented, highly visible, LED telltale light clearly indicates if airbag protection is turned off Each switch is tested to 100,000 cycles to ensure quality and reliability NHTSA does not presently require active side curtain airbags Key operated switches can be turned off to protect equipment or on to protect passengers as needed (airbags should remain turned off anytime equipment is mounted in the airbag deployment zone) OEM Plug-and-Play adaptors for police package vehicles make for quick and easy installation Side Curtain Airbag On/off Switch provides means to shut off airbags when gun racks or rigid wing partitions reside in the airbag deployment zone Electronic Protection Products 13

14 Safestop Vehicle Anti-theft Systems With Safestop, the vehicle remains running, maintaining functionality of all electronic functions including: Air conditioning and heat; Surveillance Equipment (cameras, radar, etc); Radios; Lights and Sirens; Computers and more yet, cannot be put into gear and driven off Vehicle thefts are on the rise and police fleets are not spared from this concern. Just read the headlines and you ll soon notice that stolen police cruisers happen on quite a regular basis. Because officers must often leave running vehicles unattended, for short durations. This can make the auto an easy target for theft, especially enticing to criminals who see no other means of escape from the situation. Pro gard s Safestop Vehicle Anti-theft Systems provide fleets with the necessary protection against such thefts without requiring officers to remember additional steps for activating the system. The Safestop System is designed so it can be turned on and left on with our 24/7 Always on Protection. The simple, natural action of removing the key will activate the protection, no buttons to push. In addition, Safestop s minimal amp draw means fleet managers don t have to worry about unnecessary power consumption. Because of our 24/7 Always on Protection, vehicles are protected around the clock, even when parked in a deserted pool lot or a dark driveway overnight. The Safestop Vehicle Anti-theft System is capable of protecting not only your fleet of cruisers, it can also protect your officer s weapons and duty gear against theft. With the system activated, our Gun Lock Secure feature (when connected to electronic gun locks) prevents the lock from opening if the momentary switch is depressed. Officers can still access weapons with their override key as usual as well as the customary 8 second delay upon removing the key. Our Trunk Lock Secure connects to the OEM trunk latch release and works much the same way as our Gun Lock Secure feature. With the system activated, criminals will not be able to access weapons or duty gear in the trunk by engaging the trunk latch release. Officers will be able to override this feature if necessary by utilizing normal access override with the ignition key in the hatch s lock. Electronic Protection Products 14

15 Once the system is activated, the anti-theft functions allow the vehicle to remain running even after the ignition key is removed; with the ignition key removed the shifter is locked and the anti theft functions cannot be overridden, even if the toggle switch is turned off Brake Pedal Override feature kills the engine instantly for use with the 24/7 Always On operation Unit integrates with the ignition system and offers additional connections for protecting both gun racks and trunk contents 8 second Gun Lock Delay allows ample time for officers to access weapons in electronic gun racks upon removal of the ignition key 1) Step one turns the system on via a toggle switch that can be left on indefinitely 2) Step two activates the anti-theft functions anytime the ignition key is removed while the system is turned on Low profile housing fits neatly and discretely out of sight, underneath dash Plug-and-Play adaptors easily integrate into the vehicle ignition system for quick and simple installations Extremely low amp draw means that the system can remain activated 24/7 without worries of battery drain The key is the KEY Once the Safestop Vehicle Anti-theft System is activated, anytime that the key is removed from the ignition, the vehicle, as well as, gun locks and trunk contents will be protected against theft 24/7 Always On Protection The Safestop Anti-theft System is activated through a toggle switch that can literally be turned on once and left on for as long as the antitheft system is installed in the vehicle, there is no need to ever shut it off Gun Lock Secure This feature will protect your weapons mounted in an electronic gun rack against theft anytime the Safestop Anti-theft System is activated, even when the momentary switch is pressed (see pages for more information about our Gun Racks) Trunk Lock Secure This feature will protect the contents of the trunk from being accessed via the factory trunk latch release as long as the Safestop Anti-theft System is activated Electronic Protection Products 15

16 Universal Push Bumpers Patented design features No Holes Drilled installation and uses existing OEM holes and slots to mount bumper for a quick and easy installation TIR3 LED Versions 2 ION LED Versions Sedan Push Bumpers Improved rugged steel construction ensures a longer, more durable life for the bumper Solid weld frame construction cuts down on installation time Integrated mounting design will not interfere with the SRS airbag system Features pre-cut holes and slots for mounting popular auxiliary lighting and speakers Black powder coated finish prevents corrosion from salt spray and other environmental conditions Integrated Whelen LED Lightbar Options: Sedan - (6) TIR3 Lights or (2) ION Lights SUV - (8) TIR3 Lights, (2) ION Lights, or (4) ION Lights All LED versions are available in three lightbar pattern options: all red, all blue, or ½ red /½ blue Mar resistant rubber padding provides an added layer of protection between the bumper and the vehicle being pushed SUV Bumpers The SUV version features a larger profile that offers a more robust coverage of grill area, than the sedan version TIR3 LED Versions 2 ION LED Versions 4 ION LED Versions Studies have shown that prompt removal of disabled vehicles from traffic patterns can greatly reduce chances of additional accidents occurring. The addition of a Pro gard Push Bumper allows for safe and easy removal of such vehicles. We ve designed our push bumpers with wear and tear in mind. Our Standard Bumper features a rugged steel design that allows you to softly push stranded vehicles to safety without fear of compromising the bumper or vehicle s structure. Four ION LEDs shown on a Ford PI Utility Two ION LEDs shown on a Ford PI Sedan Shown on a Dodge Charger Exterior Protection Products 16

17 XPush Bumpers Our wrap around style XPush Bumpers are designed extra large to provide full coverage of the front grill and headlight area against animal strikes and debris. Our bumpers mount in a manner that will not compromise the vehicles structure or frame. Thus, the mounting style will not throw the vehicle off balance when pushing other motorists to safety. Shown on a Dodge Charger Black Powder Coated finishes protect bumpers from environmental elements and salt spray that can otherwise cause corrosion. Made from heavy duty aluminum that is strong enough to endure impacts yet lightweight enough that it won t hamper vehicle gas mileage Specific vehicle designs fit each police package vehicle making for a tailored look and solid fit Wrap around design protects front quarter panels and headlights from debris and animal strikes Shown on a Chevrolet Tahoe Broad, oversized design helps to protect entire front portion of vehicle from front on animal strikes Provides an added layer of protection to vital engine and cooling components from obstacles in vehicle s path Black powder coated finish resists salt spray and other environmental conditions Solid state construction is stamped from onr continuous sheet of aluminum that prevents the bumper from twisting or flexing into the vehicle that can cause scuffs and scratches to vehicle Mounting system keeps bumper in balance even when performing PIT maneuvers Exterior Protection Products 17

18 Ballistic Door Panels Kevlar panels are significantly lighter than panels made from other materials Panels are cut to fit the curves of each specific police package vehicle and offer more coverage than factory options Tested to NIJ Level Testing Standards/humidity and temperatures Panels fit between the exterior wall and the interior panel for a discrete, undetectable look that is easy to install Steel, NIJ Level III Panels are available for select models* Will not interfere with window operation *Contact a Pro gard customer service representative for vehicle availability NIJ Level IIIA protection against bullets up to a 44 Magnum as well as all threats in Types I, IIA, and II. Criminals are getting braver these days. Thus, many officers are finding themselves needing extra protection against weapon fire. Give your officers added protection on their most dangerous beats with our NIJ Level IIIA rated Ballistic Door Panels. Vehicle specific panels offer full door coverage. Pro gard s drop-in door panels are easy to install and are the perfect addition to any cruiser that comes in the line of fire. We offer both driver side and passenger side panels, made out of trusted Kevlar material. Our panels feature vehicle specific designs. Because they are made to fit the unique contours of police package vehicles, they offer increased protection over simple shaped OEM panels. Skid Plates Provides an added layer of protection for vital components (transmission, exhaust manifold, and oil pan) that are otherwise exposed Quick and easy access for routine maintenance like oil changes without removing the skid plate No Holes Drilled feature utilizes existing factory holes and slots for a quick and easy installation Black powder coated finish resists corrosion from salt spray and other environmental conditions Rugged steel construction stands up against the daily wear and tear of off road driving and median/shoulder traffic stops The common maneuvers of pulling off the road for routine traffic stops or cutting through medians can take a serious toll on the undercarriage of police vehicles. Because we have fleets in mind when we design our products, all of Pro gard s Skid Plates allow your technicians easy access to oil filters and drain plugs,without having to remove the plate through carefully placed access slots. Shown on a Dodge Charger Exterior Protection Products 18

19 Rear Window Guards Shown in a Ford PI Utility Shown in a Ford PI Utility Prevents break-ins and theft of highly visible cargo area contents like weapons and expensive duty gear Fits PI Utilities with or without the Ford Ready for the Road Rear Lighting Package Installs underneath the window trim for a clean smooth finish that won t snag on clothing or duty gear Three piece set includes: Rear Cargo Door Window Guard, pair of Rear Side Window Guards, Polycarbonate Space Fillers for vehicles without the Ford s lighting package, mounting hardware and instructions Contoured tabs fit snug against window edges for a clean smooth finish Lightweight construction will not wear out the actuators of the rear hatch Sturdy 11 gauge steel frame construction has black powder coat finish Durable ⅛ wire screen with 2 spacing that won t hinder the driver s rear window visibility As more and more fleets switch to the SUV platform for patrol vehicles, the necessity to develop different styles of vehicle protection products begins to take shape. While the open nature of the SUV s cargo area is alluring to fleets for its storage capacity, the open visibility of this space can quickly become a problem. The wrap around windows of the cargo area make expensive duty gear and weapons highly visible over a sedan s trunk. This can create a very enticing scenario for the would be thief. Pro gard s Rear Window Guards are the perfect theft deterrent for the rear cargo area of your police fleet of Utilities. Exterior Protection Products 19

20 Cargo Cabinets Large Cargo Cabinet w/ Vertical Gun Rack shown in a Chevrolet Tahoe Small Cargo Cabinet shown in a Ford PI Utility SUVs are quickly becoming standard patrol vehicles and storage solutions are a must. Segmenting cargo space with storage options provides your officers with a safe and organized means for securing duty gear and weapons. Pro gard offers two large sized SUV Cargo Cabinets that feature two gun rack options and can fit any SUV with a 4 wheel well clearance. We also offer a smaller SUV cabinet with a locking weapon drawer that requires a 3½ wheel well clearance. Large Cargo Cabinet Dimensions: 29 h x 48 w x 30 d Small Cargo Cabinet Dimensions: 26½ h x 40 w x 18 d Choose either horizontal or vertical gun rack option in our Large Cargo Cabinets Small Cargo Cabinet features weapon drawer with programmable Simplex lock to further secure items like weapons or electronics Horizontal Gun Rack, Large Cargo Cabinet Tops are finished with a Lonseal liner that is easy to clean and provides a tacky surface for gripping loose items Marine grade carpet won t absorb moisture, excellent for rainy days or humid weather PVC bumpers contour to cabinet edges protecting corners from splitting ABS overlaid exterior is an easy to clean exterior that won t fade in sunlight HDP composite panel doors are sturdy and impact resistant Large, easy access storage bins are perfect for storing oversized gear and equipment Standard file size drawers accommodate paperwork or duty gear MDO plywood structure combines the sturdy characteristics of plywood with the addition of resin outer layers that resist moisture Gun racks are equipped with 8 second timers, momentary switches, and locks to secure your weapons Small Cargo Cabinet Vertical Gun Rack, Large Cargo Cabinet Organization & Storage Products 20

21 Weapon/Storage Drawers Shown in Ford PI Utility Shown in Ford PI Utility While SUVs are gaining popularity as patrol vehicles, they lack the ability to conceal weapons in a manner that the trunk of a sedan offers. Pro gard has developed the perfect solution with our locking Weapon/Storage Drawer. Made out of the same sturdy components as our popular Cargo Cabinets, these drawers are sure to meet the tough demands of your fleet. Drawers can be mounted with or without our Cargo Barriers and provide 11 of clearance space underneath for easy access to the spare tire well compartment in the load floor. Mounts with or without Pro gard s Cargo Barrier External Dimensions: 11 h x 44½ w x 18 d Internal Dimensions: 6½ h x 39½ w x 14½ d Easily accommodates up to 40 weapons Programmable, combination Simplex lock Elevated mount provides 11 clearance space underneath for access to spare tire well in load floor Mounts below driver s field of vision and will not impede rear window visibility PVC bumpers contour to cabinet edges to protect corners from splitting HDP composite panel doors are sturdy and impact resistant MDO plywood structure combines the sturdy characteristics of plywood with the addition of resin outer layers that resist moisture Customizable foam liner secures weapons and other contents during travel Organization & Storage Products 21

22 Trunk & Cargo Area Organizers Shown in Ford PI Sedan Shown in Ford PI Utility Pro gard offers Trunk and Cargo Area Organizers that are designed to take advantage of the spare wheel area which, can often times be an under utilized space in police vehicles. We also offer Universal Organizers for other non-descript spaces. Vehicle specific organizers are designed to fit the unique contours of the vehicle s spare tire well, making use of an otherwise under utilized space Lightweight ABS construction is extreneky durable for storing heavy and even sharp objects Removable storage dividers allow officers to pick and choose how to arrange and store their gear Shown in Chevrolet Caprice Shells are made of durable ABS material that is both heat and cold resistant Hinges offer easy access to stored gear without having to remove lids D3805 Universal Trunk Organizer can be used with or without the lid and fits most applications Universal Organizer D ½ h x 28 w x 18 d Vehicle Specific Caprice Organizer Organization & Storage Products 22

23 Seat Organizers & Trunk Trays Lightweight ABS, portable design features adjustable straps that adapt to any seat Portable Printer D h x 14¾ w x 10 d fits portable printers up to 14 x 8½ x 5 Open Slot D ¼ h x 14¼ w x 4¼ d Multi-Slot D ¼ h x 14¼ w x 3½ d Non-reflective finish prevents glare Mounts to any flat surface; easily moves between car, home, and office Built in handle for easy carrying Keep paperwork, handcuffs, flashlights, and other small duty gear secured within reach and easy to find with Pro gard s Seat Organizers. Our Sedan Trunk Trays offer both a storage platform and an electronics mounting surface that retracts into the trunk. The perfect solution for keeping loose equipment or wires free from entanglement when officers need to access other items stored in the trunk space. Pan clearance 21 x 32 x 2 taking full advantage of trunk cavities for storage and mounting No holes drilled mounting utilizes existing OEM slots and holes for a quick and easy installation Multiple holes on mounting brackets offer agencies flexibility in selecting the mounting location s distance from speaker deck Durable, black powder coated steel resists corrosion Easy glide track with full extended-length ball-bearing slides allows tray to fully extend for easy access Extended Trunk Tray shown in a Dodge Charger Reversible pan conceals self-tapping-screw installations Easy to use latches on both sides of tray lock firmly into the closed position even threw the vibration of driving Exceeds 100 lbs. weight carrying load Suspended mounting style drops from underneath the speaker deck, thus no support bracketry obstructing storage space beneath the tray Organization & Storage Products 23

24 Choosing the Right Gun Rack for your Weapon(s) Step 1: What type of vehicle will the gun rack be placed in? Because all manufacturers create different interiors in their vehicles, we must accommodate these differences with our gun rack mounts. Horizontal Partition Mount Roof Mount Trunk Mount Therefore, the year, make and model of vehicle determines our first step in building your customized gun rack. Step 2: Where will the gun rack be mounted? Vertical Partition Mount Self Supporting Mount Pro gard offers many different locations for you to mount your gun rack in the vehicle. Our three most popular locations are the Partition Mount, Self-supporting Mount, and the Roof Mount. We also offer Pro-cell and Special Purpose Mounts to accommodate other preferences. Front Sight Pump Flash Suppressor Side Saddle Rear Forearm Sight Rails Rear Sight Rails/ Forearm Side Saddle Trigger Carry Handle Step 3: Stock Range Stock Side Saddle Stock Magazine/ Trigger Grip Clip With the vast number of weapons in active duty, we sometimes require additional information and measurements about the weapon(s) being mounted in the gun rack. Our customer service team will work closely with you if necessary to identify specific measurements on your weapon to ensure that we get the best fitment for the weapon(s) into our gun racks The above diagrams point out some of the areas that we may request more specific measurements/information to help establish proper fitment. What type of weapon(s) are you planning to house in your gun rack? Obviously, the type of weapon you are planning to house in the gun rack is of utmost importance. Now that we have determined where you want the gun rack to go, we can determine how to secure your gun(s). At this point we will also need to know if you need a single or dual gun rack. There are a great deal of variations between weapon styles that we take into consideration when customizing the mounting brackets and gun lock portion of your gun rack. In order to secure the best fitment, we build the gun rack around your specific weapon and accessories. At this point, you can choose the type of key access for your rack. We provide a gun lock for each weapon that features either a handcuff, vending, or standard key release (or none at all). All gun racks come equipped with an 8 second timer and momentary switch that allow for quick, easy access to the weapon(s). Step 4: What weapon accessories will you be using on your weapon? The final step is to build around any accessories (if any) that you will be using on your weapon. Things like sights, lights, shields, and other accessories you place on the mounting rails. We also need to know about any removable accessories (such as lights, grips, and handles) that are on the weapon. The placement of these accessories can greatly effect the way we design the way that your weapon secures into the gun rack. As always, our customer service team will work with you as closely as necessary to ensure that we are able to collect the right information to ensure the best fitment of your weapon into the gun rack. Handles/ Grips Scopes/Magnifiers Lights Gun Racks 24

25 Partition Mount Gun Racks Pro gard s most popular mounting style of gun racks is the Partition Mount. Offered in three styles, guns are within easy reach of your officer when they need quick access to their weapons. All gun racks come with 8 second timers and momentary switches to ensure a quick release when time is critical. Don t forget to purchase a Safestop Vehicle Anti-theft System to protect weapon racks when officers must step away from their vehicles (see pages for more details) Shown in a Chevrolet Tahoe (See more information about our Prisoner Transport Partitions on pages 6-8.) Shown in a Dodge Charger Shown in a Chevrolet Impala Recessed Partition Mount Horizontal Partition Mount Vertical Partition Mount Custom fit to your specific weapon helps to eliminate road rattle Durable, powder coated steel construction Choose from three different styles of gun lock keys: handcuff, straight, or vending Available for single or dual weapons No Holes Drilled installation Momentary switch with 8 second delay timer on gun lock allows for quick access to weapons with the simple touch of a button Custom fit to your specific weapon helps to eliminate road rattle Durable, powder coated steel construction Choose from three different styles of gun lock keys: handcuff, straight, or vending Available for single weapons only No Holes Drilled installation Momentary switch with 8 second delay timer on gun lock allows for quick access to weapons with the simple touch of a button Custom fit to your specific weapon helps to eliminate road rattle Durable, powder coated steel construction Choose from three different styles of gun lock keys: handcuff, straight, or vending Available for single weapons only Allows for mounting a weapons where space is limited Momentary switch with 8 second delay timer on gun lock allows for quick access to weapons with the simple touch of a button Gun Racks 25

26 Gun Racks for Vehicles without Partitions Self Supporting Mount Momentary switch with 8 second delay timer on gun lock allows for quick access to weapons with the simple touch of a button Choose from three different styles of gun lock keys: handcuff, straight, or vending Fits comfortably behind aftermarket consoles Gun Rack lines up with seat edge for easy access that won t interfere with driver s range of motion Custom fit to your specific weapon helps to eliminate road rattle Available for single or dual weapons No Holes Drilled installation Shown in a Dodge Charger Durable, powder coated steel construction If you are going to carry weapons, easy access and secure mounting are top priorities. Pro gard offers a selection of Gun Rack products that are the perfect solution for detective, supervisor, and other such vehicles that are not utilizing partitions. Our Self Supporting Gun Racks sit behind the clearance of the front row seating so officers don t have to worry about bumping into the weapon rack when moving around. Strategically placed weapons are quick to access when the situation demands. Likewise, our Pro-clamp Roof Mount Gun Racks provide a less conspicuous mounting location for weapons when fleets want a more concealed mount inside the vehicle. Pro-clamp Roof Mount Don t forget to purchase a Safestop Vehicle Anti-theft System to protect weapon racks when officers must step away from their vehicles (see pages for more details) Installs in minutes Durable, powder coated steel construction Available for single or dual weapons If you are using a Pro-clam Roof-Mount Weapon Rack in a vehicle with side curtain airbags, you ll need to incorporate an AOI Side Curtain Airbag On/off Control Switch to safely mount the rack in the airbag deployment zone (see page 13 for more details about the AOI Side Curtain Airbag On/off Control Switches) Choose from three different styles of gun lock keys: handcuff, straight, or vending Custom fit to your specific weapon helps to eliminate road rattle Momentary switch with 8 second delay timer on gun lock allows for quick access to weapons with the simple touch of a button Shown in a Ford PI Utility Gun Racks 26

27 Motorcycle & Special Purpose Gun Racks Motorcycle Mount Universal fit, secures a loose magazine for easy access Shown on a Harley-Davidson FLHP Series Mounts in the high-side, saddle-bag Fits Colt Commando M4 Carbines or variants (up to 27¼ overall length) Momentary switch with 8 second delay timer on gun lock allows for quick access to weapons with the simple touch of a button Handcuff key override access Foam padded gun locks reduce road rattle Durable powder coated steel finish resists corrosion and other environmental conditions No Holes Drilled installation Motor patrol units can easily conceal an AR with our Motorcycle Gun Rack. Designed to fit the most popular style of police issue saddle bags, it can accommodate weapons up to 27¼ overall length. Perfect for a collapsed M4 Commando. Pro gard s unique design allows for mounting an additional loose magazine for easy access when the situation arises. The Motorcycle Gun Rack comes with the same standard momentary switch as our other versions and can be mounted at the fleet s discretion for hidden yet easy access to the weapon. Pro gard also offers other mounting solutions that can accommodate screen mounts, trunk mounts, rear window mounts and more. Contact your Pro gard Customer Service Representative to find out if we have a mounting style to meet your fleet s specific needs. Special Purpose Gun Racks Other mounting options are available, find out if we have what you are looking for by contacting our customer service team. Shown in a Ford Crown Victoria Shown in a Chevrolet Tahoe Shown in a Ford PI Sedan Gun Racks 27

28 Prisoner Transport Products Pro-cell Prisoner Transport Systems Space Saver Plus Partitions Universal Partitions Transport Seats & Floor Pans Window Armor & Rear Door Panels Cargo Barriers Prisoner Transport Lighting Electronic Protection Products Front Passenger, AOI Airbag On/off Control Switches Side Curtain, AOI Airbag On/off Control Switches Safestop Vehicle Anti-theft System Exterior Protection Products Universal Push Bumpers Universal LED Push Bumpers Skid Plates X Push Bumpers Ballistic Door Panels Rear Window Guards Organization & Storage Products Cargo Cabinets Weapon Drawers Trunk Trays Trunk & Cargo Area Organizers Seat Organizers Gun Racks Partition Mount Gun Racks Self Supporting Gun Racks Roof Mounted Gun Racks Motorcycle Gun Racks Trunk Mounted Gun Racks Pro-cell Prisoner Transport System Gun Racks 7988 Centerpoint Drive, Suite 400 Indianapolis, IN p / f sales@pro-gard.com