All inclusive. #MAGICPOWERMODULES
|
|
- Charity Goodman
- 5 years ago
- Views:
Transcription
1 All inclusive. #MAGICPOWERMODULES MagI³C Power s are easy to use DC/DC converters with integrated regulator IC, power inductor and capacitors. Design and layout reviews as well as support with EMI fi lter design are offered as a service for all customers. Datasheets contain detailed specifi cations and application information. For more information please visit: Simple design-in process Design and layout support EMI filter design for EN55022 class B compliance Evaluation Boards for all products LGA-6 LGA-16 QFN TO263 SIP-3 SIP-4 SIP-7
2 Product Overview VDMM / VDRM Portfolio (Low Voltage) Micro / VDRM MagI³C Power s V OUT I OUT max (A) EVAL Board Variable Step Down Micro (VDMM) 3.3, LGA-6EP Variable Step Down Regulator (VDRM) 3.3, 5 5, 9, BQFN BQFN BQFN LGA-16EP LGA-16EP LGA-16EP LGA-6 MagI³C Micros Very low profile micro package Ideal for space constrained applications Small C IN and C OUT integrated 3 solder cycles supported LGA-16 MagI³C Power s Low profile LGA package Stand alone solution (C IN and C OUT integrated, 2 external components to set V OUT ) Ideal for space constrained applications 2 solder cycles supported BQFN MagI³C Power s Low profile package Simple application circuit (only 4 external components required) Optional multiple features (adj.frequency, adj.soft-start, power good,sequencing, tracking, synchronization to external clock, adjustable undervoltage lockout) 3 solder cycles supported
3 MagI³C Power s Advantages & Design-In Support Advantages Fewer external components (reduce overall footprint) IC and inductor combined into a single package (smaller PCB size) Simple design-in process & fast time to market Low conducted & radiated EMI complaint to EN55022 class B / CISPR-22 Individual Design-in Support Design Steps (e.g. VDRM TO263) 6 design steps Set the output voltage Set the operating frequency with R ON Select the input capacitor Select the output capacitor Select the feed forward capacitor Select the soft-start capacitor 1 optional design step: Select under-voltage lockout divider
4 Layout Review of your PCB Files Design Steps (e.g. VDRM TO263) 4 design steps Place the input capacitors close to and PGND Place C SS, R FBT and R FBB close to their respective pins and analog ground (AGND) Place the resistor divider (R FBT and R FBB ) close to the FB pin and trace at the positive terminal of the last output capacitor (C OUT2 ) Design the thermal vias GND C IN1 Bottom Ground Plane R ON C IN2 MagI 3 C PGND VIN RON EN AGND SS FB VOUT C SS C OUT1 C FF C OUT2 GND V OUT R ENT R ENB R FBB R FBT EMI Filter Design Support Tested filter configuration with inductor and capacitor order codes Power Conducted Emissions [dbμv/m] EN55022 Class B Quasi Peak limit EN55022 Class B Average limit Quasi Peak Average Conducted Emissions [dbμv/m] EN55022 Class A limit EN55022 Class B limit Horizontal Vertical Frequency [MHz] Frequency [MHz] 1000 Conducted Emissions Measured on evaluation board Radiated Emissions Measured on evaluation board with input filter C f = 2.2 μf and L f = 22 μh. with input filter C = 2.2 μf and L f = 22 μh. f = 24 V, V OUT = 5 V, f SW = 500 khz, I LOAD = 2 A = 24 V, V = 5 V, f = 500 khz, I = 2 A OUT SW LOAD
5 Product Overview LDHM / VDRM Portfolio (High Voltage) LDHM / VDRM MagI³C Power s LED Step Down High Current (LDHM) Variable Step Down Regulator (VDRM) V OUT I OUT max EVAL Board 12, 24, TO263-7EP , 12, 18, 24, 36* TO263-7EP TO263-7EP TO263-7EP TO263-7EP TO263-7EP TO263-7EP TO263-7EP * BQFN TO263 MagI³C Power s Leaded package for easy manufacturing and prototyping Simple layout Wide input voltage range for input transient capability Support ambient temperatures up to 105 C 2 solder cycles supported BQFN MagI³C Power s Low profile package Simple application circuit (only 4 external components required) Optional multiple features (adj.frequency, adj.soft-start, power good, sequencing, tracking, synchronization to external clock, adj. undervoltage lockout) Wide input voltage range 3 solder cycles supported More information on:
6 Product Overview FDSM / FISM Portfolio (Through-Hole Packaging) FDSM MagI³C Power s Fixed Step Down Regulator (FDSM) 9, 12, 18 9, 12, 18, 24 V OUT I OUT max (A) SIP EVAL Board 17800FDSM SIP-3 MagI³C Power s Simplest design (no power supply knowledge required) Leaded through-hole package for easy manufacturing and prototyping Stand alone solution (C IN and C OUT integrated, no external components) L78x series linear regulator replacement (no heatsink required) FISM MagI³C Power s Fixed Isolated SIP (FISM) ±10% from nominal V OUT P OUT max V isolation (W) functional SIP SIP SIP-4 / SIP-7 isolated MagI³C Power s Simplest design (no transformer design know-how required) Leaded through-hole package for easy manufacturing and prototyping Stand alone solution (C IN and C OUT integrated, no external components) Simple functional isolation for overvoltage protection,avoiding ground loops, ground shift and noise in signal path or sensor systems Standard industrial package and pin configuration IEC/EN/UL60950 approved DIENECKARPRINZEN INZEN DD
Design flow Magic Power Modules
Design flow Magic Power Modules Alex Snijder Field Application Engineer Wurth Elektronik Nederland B.V. Alex.snijder@we-online.com Basics When do you need an DC/DC converter? If your source voltage does
More informationEvaluate: MAX17502E in TDFN Package. MAX17502E Evaluation Kit. General Description. Features. Component List
General Description The MAX17502E evaluation kit (EV kit) provides a proven design to evaluate the MAX17502E high-efficiency, highvoltage, synchronous step-down DC-DC converter. The EV kit uses this device
More informationFeatures. General Description. Component List
General Description The MAX17502F evaluation kit (EV kit) provides a proven design to evaluate the MAX17502F high-efficiency, highvoltage, synchronous step-down DC-DC converter. The EV kit uses the device
More informationEvaluate: MAX17501H in TDFN Package
General Description The MAX17501H EV kit provides a proven design to evaluate the MAX17501H high-efficiency, high-voltage, synchronous step-down DC-DC converter in a TDFN package. The EV kit uses the MAX17501H
More informationZSPM401x Application Note - Circuit Layout and Component Selection Contents
ZSPM401x Application Note - Circuit Layout and Component Selection Contents 1 Introduction... 2 2 Typical Application Schematic... 2 3 Printed Circuit Board (PCB) Layout Guidelines... 3 4 Recommended Bill
More informationPurpose. Table of Contents. Purpose Introduction General Product Information Key Performance Summary Table... 3
Purpose The RT7251B is a high-efficiency current mode synchronous step-down regulator that can deliver up to 1.5A output current from a wide input voltage range of 4V to 17V. This document explains the
More informationGeneral Description. Features. Component List. Component Suppliers
General Description The MAX5062A evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates the performance of the MAX5062A 60V, 300mA ultra-small, high-efficiency, synchronous
More informationSilvertel. Ag Features. 2. Description. 57V Boost Converter Module. Small package. Suitable for IEEE802.3af and IEEE802.
Silvertel V1.0 May 2015 Datasheet Ag7100 Pb 1. Features Small package Suitable for IEEE802.3af and IEEE802.3at compliant PSEs Low cost High efficiency (>90%) Input voltage range 12V to 27V Minimal external
More informationMAX8686 Evaluation Kit Evaluates: MAX8686
General Description The MAX8686 evaluation kit (EV kit) provides a proven design to evaluate the MAX8686 single-phase, highefficiency, 25A, step-down regulator with integrated switches. The device is a
More informationAutomotive EMI Demystified: Part 2 Pursuing an Ideal Power Supply Layout
Automotive EMI Demystified: Part 2 Pursuing an Ideal Power Supply Layout Jens Hedrich Senior FAE, Central Europe December 2018 Jens Hedrich Senior FAE, Central Europe 2010 Present MPS Senior FAE since
More informationMEE1 Series Isolated 1W Single Output DC/DC Converters
www.murata-ps.com MEE1 Series FEATURES UL69 recognised Operation to zero load Single isolated output 1kVDC isolation Hi Pot Test Efficiency up to 87% typical Wide temperature performance at full 1 watt
More informationEvaluates: MAX MAX16935 Evaluation Kit. General Description. Features and Benefits. Quick Start. Table 1. EN Configuration (JU1)
General Description The MAX16935 evaluation kit (EV kit) demonstrates the MAX16935 high-voltage, current-mode step-down converter with low operating current. The EV kit operates over a wide 3.5V to 36V
More informationMAX17498B Evaluation Kit Evaluates: MAX17498B
19-6293; Rev 0; 4/12 MAX17498B Evaluation Kit General Description The MAX17498B evaluation kit (EV kit) is a fully assembled and tested circuit board that contains an isolated 7W flyback DC-DC converter.
More informationMAX16920B Evaluation Kit Evaluates: MAX16920A/MAX16920B
19-5744; Rev 0; 1/11 MAX16920B Evaluation Kit General Description The MAX16920B evaluation kit (EV kit) is an assembled and tested PCB used to evaluate the MAX16920B powermanagement IC for automotive radios,
More informationNXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
More informationACT V/1.5A Backup Battery Pack Manager FEATURES APPLICATIONS GENERAL DESCRIPTION. Rev 0, 06-Nov-13 Product Brief
0 200 400 600 800 1000 1400 1200 5.5 FEATURES Dedicated Single Chip Solution for Mobile Power With Minimal Component Count 5V/1.5A Constant Output Current in Boost Mode 1.5A Switching Charger Programmable
More informationHP420X. 5A, High Efficiency POL Module GENERAL DESCRIPTION: FEATURES: APPLICATIONS: TYPICAL APPLICATION CIRCUIT & PACKAGE SIZE:
FEATURES: High Power Density Power Module 5A Maximum Load Input Voltage Range from 9.0V to 40.0V Output Voltage Range from 1.0V to 5.0V Excellent Thermal Performance 94% Peak Efficiency Enable Function
More information3A Switching Charger, 2.4A Boost and Fuel Gauge in One ESOP8 with Single Inductor
3A Switching Charger, 2.4A Boost and Fuel Gauge in One ESOP8 with Single Inductor DESCRIPTION ETA9740 is a switching Li-Ion battery charger capable of delivering up to 3A of charging current to the battery
More informationApplication Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
More informationS24SP series 40W Single Output DC/DC Converter
4W Single Output DC/DC Converter FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.2mm (2. x1. x.4 ) With
More information(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Reflected ripple current. Case Temperature rise above ambient ABSOLUTE MAXIMUM RATINGS
MEE3 Series SELECTION GUIDE FEATURES UL 695 recognized RoHS compliant Typical efficiency from 83% Power density 2.68W/cm 3 Wide temperature performance at full 3 Watt load, 4 C to 85 C 3 UL 94V- package
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM60-G)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM-G) Description The series DC/DC
More informationNMA 5V, 12V & 15V Series Isolated 1W Dual Output DC/DC Converters
NMA 5V, 12V & 15V Series FEATURES RoHS compliant Effi ciency up to 80% Power density up to 0.85W/cm 3 Wide temperature performance at full 1 Watt load, 40 C to 85 C Dual output from a single input rail
More informationMAX17020 Evaluation Kit. Evaluates: MAX17020
19-4132; Rev 0; 5/08 MAX17020 Evaluation Kit General Description The MAX17020 evaluation kit (EV kit) demonstrates the MAX17020 s standard application circuit. This dual Quick-PWM synchronous DC-DC converter
More informationLinear Technology Chronicle
Linear Technology Chronicle High Performance Analog Solutions VOL 17 NO. 2 FOCUS... DC/DC µmodule Power Supply Solutions Inside This Issue Ultralow Noise Step-Downs Dual Output Step-Downs High Current
More informationBuck-Boost Converter Achieving up to 97% Efficiency at 12V/5A from 4-32V Input. Linear Technology Corporation
Buck-Boost Converter Achieving up to 97% Efficiency at 12V/5A from 4-32V Input Linear Technology Corporation 1 Where are the Vin, min
More informationOutput Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage High Efficiency up to 88% I/O Isolation 1500 VDC Operating Ambient Temp. Range -40 to 85 Overload
More informationUNR Series Single Output, Non-Isolated, 3.3V 8-40 Watt, DC/DC Converters
www.murata-ps.com Features Low cost 5V or V inputs 3.3V±% (±33mV) outputs ±.5% (±8mV) max. line regulation ±.5% (±7mV) max. load regulation Guaranteed efficiencies to 86% Power densities to 9W/in 3 High
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input reflected ripple current. Switching frequency NXE1S0305MC 85
SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise (Max) Efficiency
More informationNXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
More informationHM8202. The HM8202 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers
Standalone Li-Ion Switch Mode Battery Charger Features Input Supply Range: 9V ~ 14V End-Charge-Current Detection Output Constant Switching Frequency for Minimum Noise Automatic Battery Recharge Automatic
More informationEvaluates: MAX17681A for Isolated +24V Output Configuration. MAX17681A Evaluation Kit. General Description. Quick Start. Features
General Description The MAX768AEVKITF is a fully assembled and tested circuit board that demonstrates the performance of the MAX768A high-efficiency, iso-buck DC-DC Converter. The EV kit operates over
More informationACE4108 Max.2A Li-ion Switching Charger IC
Description The ACE4108 is a 2A Li-Ion battery switching charger intended for 12V. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
More informationSilvertel. Ag Features. 2 Description. Power-Over-Ethernet Module. IEEE802.3af compliant. Small SIL package size - 56mm (L) x 14mm (H) Low cost
Silvertel V2.5 Feb 2014 Datasheet Pb 1 Features IEEE802.3af compliant Small SIL package size - 56mm (L) x 14mm (H) Low cost Input voltage range 36V to 57V Minimal (low cost) external components required
More informationNXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
More informationLM5576 Evaluation Board
LM5576 Evaluation Board Introduction The LM5576 evaluation board is designed to provide the design engineer with a fully functional power converter based on Emulated Current Mode Control to evaluate the
More informationSilvertel. Ag Features. 2. Description. Power-Over-Ethernet Module. IEEE802.3af compliant. Small SIL and SMT package available
Silvertel V2.2 Jan 2015 Datasheet Ag9700 Pb 1. Features IEEE802.3af compliant Small SIL and SMT package available Low cost, with minimal external components required Input voltage range 36V to 57V Short-circuit
More informationNKE Series. Isolated Sub-Miniature 1W Single Output DC/DC Converters FEATURES
www.murata-ps.com NKE Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Efficiency Isolation Capacitance MTTF 1 Package Style FEATURES RoHS
More informationNCS12 Series Isolated 12W 4:1 Input Single & Dual Output DC/DC Converters
NCS1 Series Isolated 1W :1 Input Single & Dual Output DC/DC Converters FEATURES UL 95 recognition pending :1 Wide range voltage input Operating temperature range - C to 5 C Typical load regulation from.5%
More information1 second start up, no external components 220µF <1 second start up + diode protection circuit 6800µF
Features Switching Regulator Description Efficiency up tpo 94%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L/W/H=11.5 x 7.5 x 1.2mm) Wide input range Short circuit protection,
More informationMEA1 Series 1kVDC Isolated 1W Dual Output DC/DC Converters
www.murata-ps.com MEA1 Series FEATURES UL 695 recognised Typical efficiency to 89.5% 1kVDC isolation Hi Pot Test Wide temperature performance at full 1 Watt load, 4 C to 85 C Industry standard pinout Power
More informationEvaluates: MAX17682 for Isolated +12V Output Configuration. MAX17682 Evaluation Kit. General Description. Quick Start. Features. Recommended Equipment
General Description The MAX7 EV kit is a fully assembled and tested circuit board that demonstrates the performance of the MAX7 high-efficiency, iso-buck DC-DC Converter. The EV kit operates over a wide
More informationHM5061 Max.1.6A Li-ion Switching Charger IC
Max.1.6A Li-ion Switching Charger IC DESCRIPTION The HM5061 is a 1.6A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum
More informationHigh Efficiency POL Module
High Efficiency POL Module MPX24AD05-TU FEATURES: High Power Density Power Module 5A Maximum Load Input Voltage Range from 9.0V to 40.0V Output Voltage Range from 1.0V to 5.0V Excellent Thermal Performance
More informationPOWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
More informationSELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage
www.murata-ps.com SELECTION GUIDE - SINGLE OUTPUT 1 Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise
More informationMEV3 Series 3kVDC Isolated 3W Single Output DC/DC Converters
SELECTION GUIDE FEATURES RoHS compliant Typical effi ciency from 83% Power density 1.9W/cm 3 Wide temperature performance at full 3 Watt load, 4 C to 85 C UL 94V- package material No heatsink required
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
More informationCMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters
www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Short circuit protection options UL 60950 recognised Single or Dual Isolated Outputs 1kVDC or 3kVDC options Hi Pot Test Wide temperature performance
More informationNXJ1 Series Isolated 1W Single Output SM DC-DC Converters
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES-, 2 MOOP, MOPP Recognised 4.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Order Code. Voltage range. Reflected ripple current. Isolation test voltage
www.murata-ps.com CME Series SELECTION GUIDE FEATURES Single Isolated output 1kVDC or 3kVDC option Wide temperature performance at full 1 Watt load -40 C to 85C Industry Standard Pinout 3.3V and 5V Inputs
More informationSeries AM2F-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input FEATURES: RoHS compliant Operating temperature -25 o C to + 85 o C 12 Pin SIP Package Input / Isolation 1, 3 or 5VDC
More informationEV2456-J-00A 0.5A, 50V, 1.2MHz Step-Down Converter Evaluation Board
EV2456-J-00A 0.5A, 50V, 1.2MHz Step-Down Converter Evaluation Board DESCRIPTION The EV2456-J-00A is an evaluation board for the MP2456, a high-voltage step-down regulator with a built-in power MOSFET.
More informationFEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION PIN OUT & MARKING. Max.2A Li-ion Switching Charger IC
DESCRIPTION The is a 2A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
More informationSELECTION GUIDE. Nominal Input Order Code Voltage. Output Voltage. Reflected ripple current
www.murata-ps.com FEATURES RoHS compliant Efficiency up to 82% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 package material Reduced footprint at 0.98cm 2 Industry standard pinout
More informationSELECTION GUIDE. Nominal Input Voltage. Output Current. Output Voltage. Reflected ripple current
www.murata-ps.com SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Isolation Efficiency Capacitance MTTF1 V V ma % pf khrs Package Style FEATURES
More informationBL8578 DESCRIPTION FEATURES APPLICATIONS PIN OUT & MARKING TYPICAL APPLICATION. Max.2A Li-ion Switching Charger IC
1 2 3 4 6 7 8 9 10 1 2 BG I LLHYW 3 BG LLHYW 4 6 7 8 9 10 DESCRIPTION The is a 2A Li-Ion battery switching charger intended for V adapters. Low power dissipation, an internal MOSFET and its compact package
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationPower Management Solution With 196 HVC ENYCAP TM for Mini Charger and Fixed Voltage Supply Board
VISHAY BCCOMPONENTS www.vishay.com Aluminum Capacitors By Gerald Tatschl MAL29699003E3 96 HVC ENYCAP TM - MINI CHARGER AND BACKUP BOARD DESCRIPTION The MAL29699003E3 mini charger and backup demonstration
More informationSELECTION GUIDE. Nominal Input Order Code Voltage. Output Voltage. Reflected ripple current
www.murata-ps.com NML Series FEATURES RoHS compliant Single isolated output 1kVDC isolation Efficiency up to 85% Wide temperature performance at full 2 watt load, 40 C to 85 C Power density 2.01W/cm 3
More informationEB Series Eighth - Brick Up to 100 Watt DC-DC Converter
FEATURES DOSA Standard Form, Fit & Function Industry standard 1/8th brick footprint 4:1 input voltage range: 9-36 or 18 75Vin ROHS II Directive 2011/65/EU Compliant No minimum load required -40 0 C to
More informationOutput Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
More information36-75 Vdc DC/DC converter Output up to 20 A/50 W
PKM 4000E Series 36-75 Vdc DC/DC converter Output up to 20 A/50 W Contents Product Program...................... 2 Quality Statement..................... 2 Limitation of Liability................... 2
More informationSilvertel. Ag9900M. 1. Features. 2. Description. Ultra Miniature PoE Module. Tiny SMT package (14mm x 21mm) IEEE802.3af compliant.
Silvertel V.7 February 20 Datasheet Ultra Miniature PoE Module Pb. Features Tiny SMT package (4mm x 2mm) IEEE02.3af compliant Low cost Input voltage range 36V to 57V Minimal external components required
More information4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 4:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required The series are SMD open frame
More informationSELECTION GUIDE. Nominal Input Order Code 1 Voltage. Output Voltage
www.murata-ps.com NTE Series FEATURES RoHS compliant Lead frame technology Single isolated output 1kVDC Isolation Efficiency up to 78% Power density 1.8W/cm 3 Wide temperature performance at full 1 Watt
More informationNTA Series Isolated 1W Dual Output SM DC/DC Converters
www.murata-ps.com NTA Series FEATURES RoHS compliant Efficiency up to 78% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 Package material Footprint over pins 1.64cm 2 Lead frame
More informationmicro DC/DC Converter
No.34 (Ver.1) 1. Introduction Miniaturization and a low profile are demanded of the semiconductors and electronic components used in portable devices such as smartphones and tablets. Accompanying the lower
More information150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
More informationMTC2 Series Isolated 2W SM 2:1 Input Single Output DC-DC Converters
MTC2 Series SELECTION GUIDE FEATURES UL 9 recognised for reinforced insulation ANSI/AAMI ES1-1, 1 MOPP/ 2 MOOPs recognised 3kVAC isolation test voltage Hi Pot Test Continuous short circuit protection Output
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The series / converters
More informationNote1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)
Features Regulated Converters : Wide input voltage range.6kvdc Isolation UL, IEC/EN69 and EN certified Efficiency up to 88% OVP, OCP & OTP + C max. case temperature Description The RPA-AW series are high
More informationS24SP15004 series 60W Single Output DC/DC Converter
6W Single DC/DC Converter FEATURES Efficiency up to 93.3% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink
More informationSilvertel. Ag9912M Ultra Miniature PoE Module. 1. Features. 2. Description. Tiny SMT package (14mm x 21mm) IEEE802.3af compliant.
Silvertel V1.1 September 2016 Datasheet Ultra Miniature PoE Module Pb 1. Features Tiny SMT package (14mm x 21mm) IEEE802.3af compliant Low cost Input voltage range 36V to 57V Minimal external components
More informationFeatures. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter
Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections DC/DC Converter Description The is a switching regulator with a wide input voltage range,
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
More informationNXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationQUICK START GUIDE FOR DEMONSTRATION CIRCUIT MHZ 3A PEAK SWITCH CURRENT MONOLITHIC STEP-DOWN CONVERTER
DESCRIPTION QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 476 Demonstration circuit 476 is a 1.25MHz 3A monolithic step-down DC/DC switching converter using the. The LT1765 features fast switching speed,
More informationSP6121 Demo Board Manual
SP6121 Demo Board Manual FEATURES DC/DC Synchronous Buck Converter for Distributed Power Systems. SIP design provides complete, ready to use solutions for : Vin=3.0-7.0V Vout=1.25-5.0V I out=8.0a (no air
More informationNON-ISOLATED DC/DC CONVERTERS
SRAH-05A / VRAH-05A Series Nonisolated Compact, low profile surface mount package Fixed frequency High efficiency means less power dissipation Excellent thermal performance Optimized for cost Remote on/off
More informationNON-ISOLATED DC/DC CONVERTERS
NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V /.5A POWER PRODUCTS S7AH-02C / V7AH-02C Modules Nonisolated Compact, low profile surface mount package Fixed frequency* High efficiency means less power dissipation
More informationMJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
More informationS AC-Coupled I/Os for Ease of Testing S Fully Assembled and Tested S +3.3V Power-Supply Operation S On-Board 25MHz Crystal SW13, SW15 SW4, SW6,
19-5173; Rev 0; 2/10 E V A L U A T I O N K I T A V A I L A B L E MAX3679A Evaluation Kit General Description The MAX3679A evaluation kit (EV kit) is an assembled demonstration board that provides convenient
More informationEfficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
More informationNME 5V & 12V SERIES. Technical enquiries tel: +44 (0) Isolated 1W Single Output DC/DC Converters
FEATURES RoHS compliant Single isolated output 1kVDC isolation Efficiency up to 80% Wide temperature performance at full 1 watt load, 40 C to 85 C Power density 1.53W/cm 3 UL 94V-0 package material Footprint
More information(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
More informationOBSOLETE SELECTION GUIDE 1. Recommended alternative: OKY-T/10-W5P-C >> click here to download the data sheet
NNL10 Series FEATURES RoHS compliant Industry standard footprint Short circuit protection High effi ciency Under voltage lock out Output voltage trimming Operating temperature range -40ºC to 85ºC SMD Construction
More informationDESIGN KIT Low Power Point of Load Solutions
Efficiency up to 97% DESIGN KIT Low Power Point of Load Solutions 600 ma to 1.5 A, Low Single and Dual Channel Converter Order Code IC-744 721 XRPWRKIT-LWP-1 Version 1.0 Exar Device Max. Output Current
More informationINTRONICS CORPORATE PROFILE
INTRONICS CORPORATE PROFILE Founded in 1968, INTRONICS is an international electronics manufacturing company maintaining performance and quality leadership in several core product lines: Standard, Modified
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)
Features Regulated Converters Description 4:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) The series wide
More informationMTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
More information(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationSilver T E L E C O M. 1. Features. 2. Description. IEEE802.3af compliant. Small SIL package size - 56mm (L) x 14mm (H) Low output ripple and noise
Silver T E L E C O M V2.0 Aug 2008 Pb. Features IEEE802.3af compliant Small SIL package size - 56mm (L) x 4mm (H) Low output ripple and noise Input voltage range 36V to 57V Only one low cost external decoupling
More informationRPR40. Features ICE Technology* POWERLINE+ 40 Watt Single & Dual Output. Railway-Converter with 3 year Warranty
Features ICE Technology* Description Tx Temperature Range without Derating 120 C Maximum Case Temperature -45 C Minimum Operating Temperature EN 50155 Compliant EN 50121-3-2 Compliant CE Marked 24, 48
More informationSL Series Application Notes. SL Series - Application Notes. General Application Notes. Wire Gage & Distance to Load
Transportation Products SL Series - Application Notes General Application Notes vin 2 ft. 14 AWG The SL family of power converters, designed as military grade standalone power converters, can also be used
More information