NON-ISOLATED DC/DC CONVERTERS
|
|
- Jared Goodman
- 5 years ago
- Views:
Transcription
1 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V /.5A POWER PRODUCTS S7AH-02C / V7AH-02C Modules Nonisolated Compact, low profile surface mount package Fixed frequency* High efficiency means less power dissipation Excellent thermal performance Optimized for cost ows burst mode operation at low load currents Description The Bel S7AH-02C and V7AH-02C modules are non-isolated, step up DC/DC power converters that operate from a nominal 3.3V source with an output voltage of 5V. They are packaged in a compact, overmolded package rated at.5a. Optional lead forming provides a vertical mount product for minimal footprint or a surface mount option for a very low profile. Standard features include output voltage adjust and industrial temperature range (-40 to +85 C). The output is closely regulated and the efficiency is typically 87% at full load. These products may be used almost anywhere low voltage silicon is employed and a 3.3V source is available. applications include file servers, routers, line cards and other computing and communications equipment. *Optional Burst/skip mode operating at light load or no load. Applications Distributed power architectures Data networking equipment Telecommunications Computers and peripherals Options Trim function Part Number Selection Voltage Input Voltage Max. Current Max. Power Efficiency Part Number Surface Mount Part Number Vertical Mount 5V 3.3V.5A 7.5W 87% S7AH-02C500 V7AH-02C500 Note: For parts with Burst/skip mode disabled, change the last character to a B (e.g. S7AH-02C50B). page
2 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V /.5A Absolute Maximum Ratings Parameter Symbol Min Max Unit Continuous Input Voltage Vin V Enable Terminal Voltage Vouten V Ambient Temperature Storage Temperature Tamb C Tstor C Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device. Input Specifications Parameter Module Symbol Min Max Units Operating Input Voltage Input Current Vin V Iin 3. 3 A Input Reflected Ripple Current ma rms Input Reflected Ripple Current (P-P) 50 mapk I 2 t Inrush Current Transient A 2 s Turn On Voltage Threshold V Note: Input capacitance one 270µF/6V, ESR = 0.08 Ω max at 25 C.. With simulated source impedance of 500nH, 5Hz to 20MHz. page 2
3 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V /.5A POWER PRODUCTS Specifications Parameter Module Symbol Min Max Units Voltage Set Point Vout V Load Regulation Line Regulation Regulation Over Temperature Total Voltage Regulation Ripple and Noise 50 p-p 2 Ripple and Noise 5 25 rms Current Range Iout 0. 5 A Overshoot at Turn On 0 5 % Capacitance Transient Response V 50% to % of Max Load Cout µ F 50 Settling Time Ts 50 µ s V % to 50% of Max Load 50 Settling Time Ts 50 µ s Note: specifications are typical at nominal input, full load at 25 C unless otherwise stated.. Vin = 3.3V, Iout = full load, Ta = 25 C MHz, µf ceramic cap on output. General Specifications Parameter Module Symbol Min Max Units Efficiency η % Switching Frequency Fsw khz 2 Voltage Trim Range 95 0 % Weight 5. 2 g. Vin=3.3V, full load and Ta=25 C. 2. See graphs on page 6. page 3
4 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V /.5A Efficiency Data Module 5.0V 89% 88% Efficiency 87% 86% 85% 84% 83% 82% current (A) 3.0V 3.3V 3.6V Ripple and Noise µf ceramic cap at the output. Ripple and noise at full load and 3.3Vdc input, 5Vdc output and Ta=25 C Ripple and noise when operating in burst mode at no load and 3.3Vdc input, 5Vdc output and Ta=25 C page 4
5 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V /.5A POWER PRODUCTS Transient Response Transient response: di/dt = 0.5A/µS, no external load capacitance Vout=5V 50% to % load transients at 3.3V input and Ta=25 C Vout=5V % to 50% load transients at 3.3V input and Ta=25 C Thermal Considerations x7ah-02c page 5
6 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V /.5A Trim Down Circuit Voltage Set-Point Adjustment Vout Rtrim Down Trim Gnd Trim Up Circuit Vout Module Trim Rtrim Up Gnd x7ah-02c Trim Resistor Calculation Rtrim down = ( Vo Vo, adj 2.5) Kohm Rtrim up = ( 8.4 Vo, adj Vo 2) Kohm page 6
7 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V /.5A POWER PRODUCTS Mechanical S7AH-02C [0.6] Suggested PCB Pad Layout [.65] 0.60 [5.24] [.27] [2.72] 0.0 [2.79] 0.70 [7.78] 0. [2.54] R0.05 [R0.38] typ R0.008 [R0.20] typ 0.02 [0.30] [.27] 0. [8.3] [2.54] [0.5] x [0.6] [9.8] [0.0] [.40] 2x [2.29] 2x Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.3] unless otherwise noted. Pin Function N/ A 2 +Vin 3 Ground 4 +Vo 5 Trim N/ A N/ A page 7
8 POWER PRODUCTS Mechanical V7AH-02C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V /.5A [7.78] [5.24] [.27] [6.73] min [.27] 0. [2.54] [0.6] [0.5] [7.82] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.3] unless otherwise noted. Pin Function N/ A 2 +Vin 3 Ground 4 +Vo 5 Trim CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ Tel Fax page 8 FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel Fax EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR 8UD, U.K. Tel Fax
NON-ISOLATED DC/DC CONVERTERS
SRAH-05A / VRAH-05A Series Nonisolated Compact, low profile surface mount package Fixed frequency High efficiency means less power dissipation Excellent thermal performance Optimized for cost Remote on/off
More informationNON-ISOLATED DC/DC CONVERTERS 4.5V-32V Input 1.2V-5.0V/3A Output
NONISOLATED DC/DC CONVERTERS Input 1.2V5.0V/3A Output x7ah03h Series NonIsolated Remote On/Off High Input Under Voltage Lockout High Power Density OCP/SCP Excellent Thermal Performance Low Cost Description
More informationDORADO MV DC/DC CONVERTERS 24V Input 12VDC 8A Output
1/4 Brick Dorado MV Series Industry standard pinout and footprint High efficiency: 86% at 12V, 8A; 88% at 12V, 4A Very low common-mode noise for a commercial DC/DC converter Constant switching frequency
More informationPL10S-12 Non Isolated DC/DC Converters Long Form Datasheet
PL10S12 Non Isolated DC/DC Converters Features Synchrono Rectification NonIsolated Fixed Frequency Nominal Input Voltage Range from (512V) Output Voltage Adjtable with the Trim Function (0.9 to 5V) Current
More informationLANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
More informationWATT MBH SERIES DC/DC CONVERTERS
Features Delivers up to 2100 Watts Efficiency up to 97 Groundbreaking low profile compact 9.0 L x 6.5 W x 1.25 H package Only 3.3 lbs No minimum load required Fixed frequency operation at 400 khz Fully
More informationApplication Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
More informationOBSOLETE SELECTION GUIDE 1. Recommended alternative: OKY-T/10-W5P-C >> click here to download the data sheet
NNL10 Series FEATURES RoHS compliant Industry standard footprint Short circuit protection High effi ciency Under voltage lock out Output voltage trimming Operating temperature range -40ºC to 85ºC SMD Construction
More informationDelphi D12S Non-Isolated Point of Load
FEATURES High Efficiency: 93.4% @ 12Vin, V/A out Size: 3.x1.x12.mm (1. x.61 x.46 ) Wide input range: 4.V~13.2V Output voltage programmable from.9vdc to.vdc via external resistors No minimum load required
More informationAPPLICATIONS: AVAILABLE OPTIONS
PRODUCT OVERVIEW The HB series offers up to 350 watts of output power in standard Half-Brick package. This series features high efficiency up to 92%, high power density and 1500 Volts of DC isolation.
More informationEB Series Eighth - Brick Up to 100 Watt DC-DC Converter
FEATURES DOSA Standard Form, Fit & Function Industry standard 1/8th brick footprint 4:1 input voltage range: 9-36 or 18 75Vin ROHS II Directive 2011/65/EU Compliant No minimum load required -40 0 C to
More informationFeatures. Low Dropout Voltage Load regulation:0.5% Max current. The AMS1117 is available in six fixed
Description Features The AMS7 is a series of low dropout voltage regulators which can provide up to A of output Low Dropout Voltage Load regulation:0.5% Max current. The AMS7 is available in six fixed
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More information150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
More information(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
More informationVDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationNorth America Asia-Pacific Europe, Middle East
Bel Power Solutions point-of-load converters are recommended for use with regulated bus converters in an Intermediate Bus Architecture (IBA). The YMS nonisolated dc-dc converters deliver up to A of output
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
More informationIL1117-xx. 1.0A Low Dropout Positive Voltage Regulator TECHNICAL DATA. Features. Applications. Absolute Maximum Ratings. Rev. 02
TECHNICAL DATA 1.0A Low Dropout Positive Voltage Regulator IL1117-xx The IL1117 is a series of low dropout voltage regulators which can provide up to 1A of output current. The IL1117 is available in eight
More informationNES50-48 : High efficient DC/DC converters
NES5048 Series: Isolated DC/DC Converters NES5048 : High efficient DC/DC converters Features Industry standard EighthBrick pin map High efficiency Low noload power dissipation Wide operating temperature
More informationTO-220. Symbol Description Max Units VIN Input Voltage 15 V IOUT DC Output Current PD/(VIN-VO) ma. -40 to 125 (* in case of IL
TECHNICAL DATA 1.0A Low Dropout Positive Voltage Regulator IL1117-xx The IL1117 is a series of low dropout voltage regulators which can provide up to 1A of output current. The IL1117 is available in eight
More informationMJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
More informationS24SP15004 series 60W Single Output DC/DC Converter
6W Single DC/DC Converter FEATURES Efficiency up to 93.3% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink
More informationVolant NEA/NEF010 Series
Features: Small size, minimal footprint/low profile 10A Output Current (all voltages) High Efficiency: up to 95% High reliability RoHS Compliant Cost efficient open frame design Pre-bias monotonic start-up
More informationIL1117C-xxLow Dropout Positive Voltage Regulator TECHNICAL DATA
IL1117C-xxLow Dropout Positive Voltage Regulator TECHNICAL DATA Description The IL1117C is a series of low dropout voltage regulators which can provide up to 1A of output current. The IL1117C is available
More information(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
More informationAdvance Data Sheet: Metamere iba Series Non-isolated SMT Power Module PicoBrick
Metamere iba Series DC/DC Power Modules 3 and 5V Inputs, 8A Output Surface Mount Power Module The Metamere Series offers a 26W power module in an industry standard surface-mount footprint. The Metamere
More informationDelphi Series V48SH, 1/16 th Brick 100W DC/DC Power Modules: 48V in, 1.8V, 30A out
Delphi Series V48SH, 1/16 th Brick 1W DC/DC Power Modules: 48V in, 1.8V, 3A out The Delphi Series V48SH, 1/16 th Brick, 48V input, single output, isolated DC/DC converter, is the latest offering from a
More informationISOLATED DC-DC Converter EC2SB SERIES APPLICATION NOTE
ISOLATED DC-DC Converter EC2SB SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Written By Enoch Danny/ Tim Joyce Research and Development Department Jacky Jack Benny Quality Assurance
More informationDCMCW60 SERIES FEATURES
DATASHEET DCMCW SERIES 4:1 Ultra Wide Input Voltage Ranges - C to +95 C Operating Temperature Single Outputs, Standard APPLICATIONS Distributed Power Systems Measurement Equipment Telecom Wireless Networks
More information1.0A Low Dropout Positive Voltage Regulator
1.A Low Dropout Positive Voltage Regulator DESCRIPTION The is a series of low dropout voltage regulators which can provide up to 1A of output current. The is available in four fixed voltage, 1.2V,1.8V,
More informationNON-ISOLATED DC/DC CONVERTERS 4.5V-14V Input 0.8V-5.5V/8A Output
NONISOLATED DC/DC CONVETES 14V Input 0.8V5.5V/8A Output x7ah08e Series PELIMINAY NnIslated emte On/Off Fixed Frequency Undervltage Lckut (UVLO) High Efficiency OCP/SCP High Pwer Density Wide ange Lw Cst
More informationS24SP series 40W Single Output DC/DC Converter
4W Single Output DC/DC Converter FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.2mm (2. x1. x.4 ) With
More informationFeatures. Applications
The new SemiQ Family of DC/DC converters from di/dt provides a high efficiency single output in a size that is only 6% of industry-standard quarter bricks, while preserving the same pinout and functionality.
More informationFEATURES. Input Voltage (VDC) 3.3
DC/DC Converter FEATURES 15W, wide input, isolated & regulated DC/DC converter CB Patent Protection Wide input voltage range (2:1) High efficiency up to 90% No-load power consumption as low as 0.12W Isolation
More information2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
More informationOutput Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
More informationAMS1117 1A Adjustable / Fixed Low Dropout Linear Regulator
1A Adjustable / Fixed Low Dropout Linear Regulator Description The is a series of low dropout voltage regulators which can provide up to 1A of output current. The is available in six fixed voltage, 1.2,
More informationPOWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
More informationNotes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Wide 4:1 Input Voltage Range EN-522 Class B The
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and EN-50121-3-2 Certified
More informationOutput Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and
More informationYM12S05 DC-DC Converter Data Sheet Vdc Input; Vdc 5A
The Products: Y-Series Applications Intermediate Bus Architectures Distributed Power Architectures Data communications Telecommunications Servers, workstations Benefits High efficiency no heat sink required
More informationOutput Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage High Efficiency up to 88% I/O Isolation 1500 VDC Operating Ambient Temp. Range -40 to 85 Overload
More informationThe XA4203 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers
Standalone Li-Ion Switch Mode Battery Charger Features Input Supply Range: 9V-16V End - Charge - Current Detection Output Constant Switching Frequency for Minimum Noise Automatic Battery Recharge Automatic
More informationSQ24 Series DC-DC Converter Data Sheet VDC Input; Standard Outputs from 1-12 VDC
The SemiQ Family of dc-dc converters from provides a high efficiency single output in a size that is only 6% of industry-standard quarter-bricks, while preserving the same pinout and functionality. In
More information(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
More informationDelphi Series V48SC, 1/16th Brick 120W DC/DC Power Modules: 48V in, 12V, 10A out
Delphi Series V48SC, 1/16th Brick 120W DC/DC Power Modules: 48V in, 12V, 10A out The Delphi Series V48SC, 1/16 th Brick, 48V input, single output, isolated DC/DC converters, are the latest offering from
More informationDC/DC Converter URA(B)_LD-15WR2 & URA(B)_LD-20WR2 Series
DC/DC Converter FEATURES 15W&20W,Ultra wide input isolated & regulated dual / single output DC/DC converter Patent Protection RoHS Wide range of input voltage (4:1) Efficiency up to 90% Isolation voltage
More informationIND065BLV Hornet: Non-Isolated DC-DC Voltage Regulator Modules
IND065BLV Hornet: Non-Isolated DC-DC Voltage Regulator Modules 12Vdc input; 16Vdc to 34Vdc output; 65W Max Power Vin+ VIN VOUT PGOOD MODULE Vout+ Applications Industrial Equipment Control Boards Test Equipment
More informationThis product is not fuse protected. User is responsible for providing system protection. Consult factory for application information.
Features High output 10A 3.3V ±10%, 5V ±10% Input Regulation ±0.4% line and load Industry standard pin configuration High efficiency to 90% Remote Sense, Trim and Enable Short Circuit protection MTBF 2.9
More informationNote1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)
Features Regulated Converters : Wide input voltage range.6kvdc Isolation UL, IEC/EN69 and EN certified Efficiency up to 88% OVP, OCP & OTP + C max. case temperature Description The RPA-AW series are high
More informationDH50 SERIES. DATASHEET Rev. A
DATASHEET DH50 SERIES 2:1 Wide Input Voltage Ranges Single Outputs, Efficiency up to 92% 2.0 x 1.0 x 0.4 Encapsulated Shielded Metal Package FEATURES RoHS & UL 94V-0 Compliant 50 Watts Output Power 2:1
More informationEfficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
More informationMTC2 Series Isolated 2W SM 2:1 Input Single Output DC-DC Converters
MTC2 Series SELECTION GUIDE FEATURES UL 9 recognised for reinforced insulation ANSI/AAMI ES1-1, 1 MOPP/ 2 MOOPs recognised 3kVAC isolation test voltage Hi Pot Test Continuous short circuit protection Output
More informationDEWS SERIES 25W-30W WIDE INPUT RANGE
DEWS SERIES 25W-30W WIDE INPUT RANGE FEATURES 25-30 WATTS OUTPUT POWER ULTRA COMPACT SIZE:1.0 x1.0 x0.52 INDUSTRY STANDARD PACKAGE 9V-18V,18V-36V,36V-75V WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY
More information4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 4:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required The series are SMD open frame
More informationAsia-Pacific Europe, Middle East North America Bel Power Solutions, Inc. BCD.
The SemiQ Family of DC-DC converters provides a high efficiency single output in a size that is only 6% of industry-standard quarter-bricks, while preserving the same pinout and functionality. In high
More informationHAE S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option Voltage Quantity Voltage Pin Options
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option
More informationLSS-T/10-W12. Adjustable Output 10 Amp SIP-mount DC/DC Converter. PRODUCT OVERVIEW FEATURES
www.murata-ps.com FEATURES Vertical SIP-mount small footprint package Output from 0.6 to 6 Volts up to 51 Watts Ultra-wide 4.5 to 13.8 Vdc input range Outstanding thermal performance and derating Extensive
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The series / converters
More informationRCD15W Series PART NUMBER STRUCTURE
DC/DC Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RCD15-48 S 05 W - M3 A HC Series Name Input Output Output Input Operating Temp.
More informationSixteenth brick format 4:1 input voltage range 2.25kV basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 91%
Features Regulated Converter Description Sixteenth brick format : input voltage range.kv basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 9% The RPAS is a low cost
More informationHAE S 05 - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE HAE100-48 S 05 - P TH HS Series Name Input Output Output Ctrl and Through hole Assembly
More informationHAE S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly Option Voltage Quantity Voltage Range Pin Options
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly
More information1 second start up, no external components 220µF <1 second start up + diode protection circuit 6800µF
Features Switching Regulator Description Efficiency up tpo 94%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L/W/H=11.5 x 7.5 x 1.2mm) Wide input range Short circuit protection,
More informationTelecommunications, Wireless, Servers, Workstations
The ASQ24 eighth-brick dc-dc converters are ideally suited for aerospace applications where high reliability, low profile, and low weight are critical. They are designed for reliable operation in harsh
More informationNot for New Design 10 WATT WD DUAL LOW INPUT SERIES DC/DC CONVERTERS. Features
Features Universal 9 to 36 Volt Input Range Up to 10 Watts of PCB Mounted Power Efficiencies to > 80% Optional On/Off Control Pin Fully isolated, Filtered Design Low Noise Outputs Very Low I/O Capacitance,
More informationOUTPUT VOLTAGE 5V MAX.INPUT CURRENT 16.0A 12V 7.0A 12V 12V 24V 35.0A 28V 48V 12V 15V 24V 28V 23.0A 48V 12V 15V 24V 28V 48V 11.5A
210W to Single Output Full Brick DC/DC Converters STANDARD FULL BRICK PACKAGE POWER DENSITY UP TO 5.53W/CM 3 EFFICIENCIES FROM 86-91% ACTIVE LOAD SHARING WIDE INPUT VOLTAGE RANGE ACTIVE LOAD SHARING REMOTE
More informationHAE S 05 W - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE HAE100-48 S 05 W - P TH HS Series Name Input Output Output Input Ctrl and Through hole
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)
Features Regulated Converters Description 4:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) The series wide
More informationDelphi NE Series Non-Isolated Point of Load DC/DC Modules: 3.1~13.8Vin, 0.59V-5.1Vout, 6Aout
FEATURES High Efficiency: 9.% @ Vin, V/A out Size: Vertical :.mm x.mm x. mm (... ) Horizontal:.mm x.mm x. mm (... ) Wide input range:.v~.8v Output voltage programmable from.9vdc to.vdc via external resistors
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED60-48 S 05 W - M3 N HC Series Name Input Output Output Input Operating Temp. Remote
More information300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator
2 GND Preliminary Datasheet 300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator General Description The is designed for portable RF and wireless applications with demanding performance and
More informationFeatures. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter
Features Regulated Converters Description 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield No Minimum Load The series / converters are certified
More informationDelphi NE Series Non-Isolated Point of Load
FEATURES High Efficiency:.% @ Vin, V/A out Size: Vertical :.mm x.mm x. mm (... ) Horizontal :.mm x.mm x. mm (... ) Wide input range:.v~.v Output voltage programmable from.vdc to.vdc via external resistors
More informationDC/DC Converter URF48_QB-200W(F/H)R3 Series
DC/DC Converter 200W, wide input voltage, isolated & regulated single output DC-DC converter FEATURES Ultra wide input voltage range (4:1) High efficiency up to 91% Isolation voltage: 2.25K VDC Input under-voltage
More informationPDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
More informationQHW050F1, QHW075F1, and QHW100F1 Power Modules: dc-dc Converters; 36 to 75 Vdc Input, 3.3 Vdc Output; 33 W to 66 W
QHWF1, QHW7F1, and QHW1F1 Power Modules: Data Sheet January 2 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress
More informationDC/DC Converter URF48_QB-75W(F/H)R3 Series
DC/DC Converter 75W, wide input voltage, isolated & regulated single output DC-DC converter FEATURES Ultra wide input voltage range (4:1) High efficiency up to 93% Isolation voltage: 2.25K VDC Input under-voltage
More informationVP ELECTRONIQUE MASSY CEDEX
24004PRFA 100W DC/DC Power Modules Railway /Transportation system FEATURES High efficiency : 89% @110Vin full load Size:61.0mm*57.9mm*12.7mm(2.4 *2.28 *0.5 ) Industry standard pin out and footprint Fixed
More informationDelphi NC30 Series Non-Isolated Point of Load DC/DC Power Modules: 12Vin, 0.9V-5Vout, 30A
FEATURES High efficiency: 94% @ 12Vin, V/3A out Voltage and resistor-based trim No minimum load required Output voltage programmable from.9vdc to.vdc via external resistors Fixed frequency operation Input
More informationRDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage Quantity Voltage Range temperature PART NUMBER STRUCTURE
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage
More informationMYLSM00502ERPL DC-DC converter
Typical unit FEATURES 4.5-17Vdc Input Voltage range (Absolute maximum input voltage:18vdc) Programmable output voltage range from 1 to 5.25Vdc Up to 2.5A of output current Ultra small surface mount package
More information3-TERMINAL ADJUSTABLE REGULATOR LM317L
3-TERMINAL ADJUSTABLE REGULATOR DESCRIPTION Outline Drawing The is an adjustable 3-terminal positive voltage regulator capable of supplying 100mA over a 1.2V to 37V output range. It is exceptionally easy
More informationEfficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.
DC/DC Converter Si ngle Output: 150 Watts DIN Rail -Option STD-Panel Mount / HC Features 4:1 wide Input range: 9~36V,18~75V & 43~160VDC Single output, up to 12.5A / 150 watts Rail EN50155 compliance High
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationModel Number Output Voltage Output Amps Input Range Max. Iin FL Efficiency Max Output Power
Small 2.32 x 0.9 x 0.37 Size Constant Frequency High Typical Efficiency of 90% (12Vout) Low Output Noise 18 to 60VDC Input Voltage Range Output Over Voltage Protection Current Limit/Short Circuit Protection
More informationAdvance Data Sheet: i3a Series 1/32 nd brick Power Module. I3A Series DC/DC Power Modules 9-53V Input, 8A Output 100W 1/32nd Brick Power Module
IA Series DC/DC Power Modules 9-V Input, 8A Output W /nd Brick Power Module IA power modules perform local voltage conversion from a V, V, or well regulated 8V bus. The ia series utilizes a low component
More informationDPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationHM8202. The HM8202 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers
Standalone Li-Ion Switch Mode Battery Charger Features Input Supply Range: 9V ~ 14V End-Charge-Current Detection Output Constant Switching Frequency for Minimum Noise Automatic Battery Recharge Automatic
More informationMaximum Input Current Vin=18V, 100% Load A Vin=24V ma No-Load Input Current
FEATURES Wide input voltage range, 18~60V 200W Output @ 18V~27V Vin range 300W Output @ 27~60V Vin range (Including 27V) Full Load Efficiency up to 88.7% @48Vin Intergrated fuse holder Parallel Connection
More informationDPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationAdvance Data Sheet: Metamere iac Series Non-isolated SMT Power Module
Metamere iac Series DC/DC Power Modules.-1V Input, 1A Output Surface Mount Power Module The iac Series offers an 8W power module in the industry s standard surface-mount footprint. The iac 1Vin series
More informationDelphi Series IPM, Non-Isolated, Integrated
FEATURES High efficiency: % @ Vin, V/A out Small size and low profile:.x.x.mm (. x. x. ) Output voltage adjustment:.v~v Monotonic startup into normal and pre-biased loads Input UVLO, output OCP Remote
More informationDesign flow Magic Power Modules
Design flow Magic Power Modules Alex Snijder Field Application Engineer Wurth Elektronik Nederland B.V. Alex.snijder@we-online.com Basics When do you need an DC/DC converter? If your source voltage does
More informationUL Certified RP30-FW
Features 4:1 Wide Input Voltage Range 30 Watts Output Power 1.kVDC Isolation UL Certified Fixed Operating Frequency Six-Sided Continuous Shield Standard 50.8 x25.4x10.2mm Package Efficiency to 91% POWERLINE
More informationSilvertel. Ag Features. 2. Description. 57V Boost Converter Module. Small package. Suitable for IEEE802.3af and IEEE802.
Silvertel V1.0 May 2015 Datasheet Ag7100 Pb 1. Features Small package Suitable for IEEE802.3af and IEEE802.3at compliant PSEs Low cost High efficiency (>90%) Input voltage range 12V to 27V Minimal external
More information