Data sheet C6 A modul 6 port 180 M GB3 pearl white

Transcription

1 Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification termination unit for mounting in service outlets for underfloor systems suitable for underfloor service outlets of OBO Bettermann (Ackermann) and some types of :hager (Electraplan Solutions) GB3 design, with C6modul 180 certified to GHMT Cat.6 re-embedded PVP component testing for Cat.6 to ISO/IEC Ed.2.2: , DIN EN : , TIA/EIA-568-C.2 ( ) and IEC Ed.1 (12/2008), certified to GHMT compliance with class E up to 500 MHz to ISO/IEC Ed.2.2: , DIN EN : tested: component up to 600 MHz, link up to 800 MHz suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT connection of data lines AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors (IDC) incl. module frame, caps and dummy covers module plug direction 45 upwards with label window for enclosed identification labels label sheet 209 x 294 mm see accessory integrated dust protection covers (also colored) color: black device casing, pearl white covers variants: 3 ports, 6 ports, 9 ports, 12 ports

2 Page 2/7 General Data Fields of application Design Mounting style Shielding Transmission technology Color Dimensions Dimension (L x W x H) Dimension (L x W x H) Modularity Labeling option Marking option Office Wall outlet GB3 shielded Copper pearl white x x mm x x in. label window with identification label by dust protection Transmission characteristics Category (ISO) Class (ISO/IEC) Category (TIA) Remote Powering PoE PoE plus UPoE HDBaseT Transmission rate up to 10 GBit 6 A E A 6A IEEE 802.3af IEEE 802.3at IEEE 802.3an Connections/interfaces Connector technology interface 1 Connector technology interface 2 Number of ports interface 2 6 Number of ports interface 2 equipped 6 Number of positions/contacts interface 1 6 x 8 Number of positions/contacts interface 2 IDC-connection RJ45-jack 6 x 8P/8C

3 Page 3/7 Connections/interfaces Termination data, solid wire (min. - max.) Conductor cross section, solid wire AWG 26/1-22/1 Conductor cross section, solid wire Conductor diameter, solid wire (bare copper) Conductor diameter, solid wire (bare copper) mm² mm in. Termination data, stranded wire (min. - max.) Conductor cross section, stranded wire AWG 26/7-22/7 Conductor cross section, stranded wire Conductor diameter, stranded wire (bare copper) Conductor diameter, stranded wire (bare copper) Module plug-in direction Cable access/outlet mm² mm in. 45 upwards Electrical characteristics Current carrying capacity Rated voltage Contact resistance Through resistance Insulation resistance Dielectric strength conductor-conductor (secondary) max. 1 A max. 50 V max. 20 mohm max. 200 mohm min. 500 MOhm max V DC Mechanical characteristics Insertion and withdrawal force Position/mounting of latch - standard installation position max. 30 N top Materials and material properties Material - Housing Material - Cover part(s) Material - Device casing Material - Supporting frame Material - Label window Material - Dust protection Material - Contact Material - Contact finish GD-Zn (zinc die-cast) ABS Frianyl GD-Zn (zinc die-cast) ABS, transparent ABS Spring steel Au (gold)

4 Page 4/7 Materials and material properties Material - Shield Material - Stuffer cap Material - Finish Material - Strain relief GD-Zn (zinc die-cast) PA 6.6 UL94 V0 Ni (nickel) PA 6.6 UL94 V0 Environmental conditions Temperature (min. - max.) Temperature - Storage C C Temperature - Storage F F Temperature - Operating C C Temperature - Operating F F Rapid change of temperature -40 C / -40 F C / 158 F / 25 cycles t=30 min Certifications GHMT Component GHMT PVP CE RoHS compliant compliant The product meets the following standards Generic cabling systems General requirements ISO/IEC Ed.2.2: DIN EN : TIA/EIA 568-C.2 Connectors for electronic equipment Free and fixed connectors DIN EN : Connectors for electronic equipment - Tests and measurements Test schedule for connectors DIN-EN : , Pg. UEL1 Endurance tests IEC : Interference proof Immunity for industrial environments DIN EN : Climate tests IEC

5 Page 5/7 Classifications ETIM 5.0 ETIM 6.0 EC EC Packing details Type of packaging Packaging unit - Weight (gram) Packaging unit - Weight (pound) 1 pc(s) / plastic bag g 1.03 lb

6 Accessories Page 6/7 Designation I subway / REG yellow I subway / REG blue I subway / REG green I subway / REG red Label sheet for wall outlets E Subway 3 port cover E Subway 3 port module frame I Subway blind cover I Subway DIN device frame I GB fastening kit PUK

7 Powered by TCPDF ( Data sheet Illustrations Dimensional drawing Page 7/7