By Carlisle Brass The Home of Quality Architectural Ironmongery

Transcription

1 DOOR CONTROL COLLECTION 13 By Carlisle Brass

2 Eurospec Door Control Collection by Carlisle Brass Welcome to the Eurospec door control collection brochure. Our comprehensive, fully tested range of door closers are suitable for a wide variety of private, commercial and public sector applications. We offer... Standard arm, high efficiency, cam action, electromagnetic and various concealed closers. Next day delivery on orders placed before 5:pm. A fast and efficient call centre where 98% of sales calls are answered in under seconds. Carlisle Brass has full traceability of all its product lines from point of manufacture to customer, through its quality management systems. High Performance Door Controls Extreme Performance Door Controls Carlisle Brass is an ISO 1:04 and ISO 01:08 accredited company.

3 Contents DCF03 6 DCC03CF 17 DCT4 7 DCC4CF/36 18 DCS4 8 DCFS1/EN3 DCFS/EN4 DCS5 9 DCTS0/EN3 DCTS1/EN4 1 DCS6 HN10 HN19 DCC4SM 13 DCCEM4 4 DCC03SM 14 DCEM03 5 DCC4SM/36 15 DCEM04 6 DCC4CF 16 AA45, CDC85SC/R CDG

4 Key to Finishes and Symbols :1996 Explained... Finishes CP EB Bright Stainless Steel Polished Chrome Electro Brass PC Polished Chrome Polished Nickel Plate Stainless Brass WHT Satin Stainless Steel Silver White :1996 is the European standard for controlled door closing devices and, as such, tests mechanical door closer performance. Adopted by EU member states, it became a mandatory requirement for CE marking in 04. It prescribes the test methodology and subsequent classification of randomly selected production line products. The test data, together with supporting technical evaluation, results in a classification code. This coding allows comparison across a range of closers according to their compliance with the standard. Door closers for fire doors are covered by a Constructive Products Directive mandate. Compliance with :1996, supported by suitable evidence, therefore allows the application of the CE mark. All conforming door closers consequently will be marked with their :1996 coding and details of the notified certification body. Electro Brass Plate SC Satin Chrome Door controls with electrical components, such as electromagnetic hold open devices, must also satisfy the requirements of both :1996 and the supplementary standard, BS EN 1155:1997 for electrically controlled door operators. PB Polished Brass Satin Nickel Plate Symbols Certifire is an independent 3rd party scheme providing high quality, voluntary, product conformity for the passive fire sector. The requirements are based on those of CE marking, but whereas the CE mark reflects compliance with minimum regulatory requirements Certifire is product certification at a higher level. Additional requirements are ISO01:08 certification, independent audit testing and a comprehensive field of application document based on carefully chosen tests. Designed to give confidence to specifiers, enforcement authorities and building owners/occupiers, the Certifire scheme is recognised by regulatory authorities both in the UK and overseas. EL E C TR ICAL Year Mechanical Guarantee Year Electrical Guarantee Door Size/Mass The number identifies the power size of the closer as defined by the door size and mass. Adjustable power closers are defined by the upper and lower power sizes. Closer Size Max Door Size CE Marking is certification to the highest levels of attestation required by the Construction Products Directive. The CE mark indicates that the product has been successfully 3rd party performance/fire tested and that the producing factory has passed stringent Factory Production Control audits, carried out by a UKAS notified certification body. BS EN 1155 British/European standard requirements and testing methods covering controlled door closing devices. British/European standard requirements and testing methods covering electrically powered hold open devices for swing doors. FD FD/60 FD60 FD/60/1 FD1/ BS 80 is the design of buildings and their approaches to meet the BS EN 1634 PART1:00 European Fire Safety standard for determining the fire resistance of door and shutter assemblies, including door hardware. FD ( Minute Fire Doors) FD60 (60 Minute Fire Doors) FD1 (1 Minute Fire Doors)FD1 (1 Minute Metal Fire Doors) FD ( Minute Metal Fire Doors).The UK Construction Products Directive requires that door hardware for use on fire doors be safe and durable. It is recommended that door hardware fitted to fire doors should be CE marked. needs of disabled people. NOTE: BS 80 Requirements are for the whole door set and therefore the minimum width of suitable door will increase when the door is fitted with all other items of ironmongery on site. Category of Use Defines the angle from which the closer will close the door in a controlled manner. Grade 3 will control the door from 5. Most Carlisle Brass closers will operate from - Grade 4. Test Cycles Included in a 0,000 cycle test as defined by Grade 8 the only grade available. 1 7mm - Kg 8mm - Kg 3 9mm - 60Kg 4 10mm - 80Kg 5 1mm - 0Kg 6 mm - 1Kg mm - 160Kg Corrosion Resistance A salt spray test is used to ascertain corrosion resistance thereby establishing suitability for use in varying environmental conditions. Five grades are identified from 0 (no identified resistance) to 4 (very high resistance). All Carlisle Brass closers achieve at least Grade 3 and are suitable for use in wet, polluted environments and most exterior applications. Safety The part of the standard which ensures the operation and suitability of the closer is hazard free. It provides peace of mind that the closer operates without risk to the user. Only Grade 1 is identified. Suitable Environments for Use Fire Behaviour Based on the results of fire testing to BS EN 1634 ensuring the door remains closed under temperatures which can exceed 00 C. Grade 1 is for closers which are deemed suitable for use on fire doors. Grade 0 are not suitable for use on fire doors. Housing/Domestic Office/Retail Commercial Hospitals/Government Education Sports Stadia/Institution 3

5 Select the Correct Door Closer For Your Application Which Door Closer? Entry Closers for General Applications Medium Frequency Commercial Applications High Frequency Commercial Applications Fixed Range Variable Position Template Range Variable Position Spring Range DCF03 DCF03 DCS4-6 CDG003 Jamb Mounted Range DCT4 High Efficiency Slide Channel Concealed and Surface Mounted Range DCC03CF-DCC4SM AA45 DCS4-6 Electromagnetic Range CDC85SC/R DCC03CF-DCC4SM DCEM03-DCEM4 Transom Closers Range Floor Springs Range DCTS0/EN3-DCTS1/EN4 DCFS1/EN3-DCFS/EN4 4 5

6 DCF03 Overhead Door Closer Fixed Power Size 3 DCT4 Overhead Door Closer Variable Power Size CPD-AD CPD-AD CPD-AD CPD-AD0197 : Fig 1 Fitting : Fig 6 Fitting : Fig 1 Fitting : Fig 6 Fitting CF646 CF646 FD/60/1 FD/60/ Min (EN) Efficiency %: 70 Max Opening 0-4 (Nm): 9.6 Max Opening 0-60 (Nm): 9.63 Max Closing 4-0 (Nm):.58 Max Closing 9-88 (Nm): Min (EN) Efficiency %: 60% Max Opening 0-4 (Nm):.37 Max Opening 0-60 (Nm):.37 Max Closing 4-0 (Nm): 18.5 Max Closing 9-88 (Nm): The DCF03 overhead door closer has an opening force (0- ) less than N when fitted to a minimum width door of 96mm, and has an opening force (-60 ) less than.5n when fitted to a minimum width door of 838mm tested in laboratory conditions. Therefore the suitable width of door for the DCF03 overhead door closer fixed in the above fixing position is 96mm. The DCT4 & DCT4BC overhead door closer has an opening force (0- ) less than 31N when fitted to a minimum width door of 948mm, and has an opening force (-60 ) less than.5n when fitted to a minimum width door of 838mm tested in laboratory conditions. Therefore the suitable width of door for the DCT4 & DCT4BC overhead door closer fixed in the above fixing position is 948mm. Specification Cover Packs Finishes Suitable Environments Specification Cover Packs Finishes Suitable Environments Closing Force EN Size 3 Efficiency 70% Max Door Width 9mm Max Weight 60Kg Angle of Opening Max Easi Fix Template Supplied DCF03/FCP DCF03/FCP DCF03/FCP DCF03/FCP DCF03/FCP DCF03/FCP DCF03/FCP Closing Force EN Size -4 Efficiency 60% Max Door Width 10mm Max Weight 80Kg Angle of Opening Max Easi Fix Template Supplied Optional Backcheck DCT4BC DCT4 DCT4/FCP DCT4/FCP DCT4/FCP DCT4/FCP DCT4/FCP DCT4/FCP DCT4/FCP DCT4BC/ & PB* DCT4BC//FCP DCT4BC//FCP DCT4BC//FCP DCT4BC//FCP DCT4BC//FCP DCT4BC//FCP DCT4BC//FCP 6 7 *Backcheck not covered by CE or Certifire.

7 DCS4BC Overhead Door Closer Variable Power Size -4 DCS5BC Overhead Door Closer Variable Power Size CPD-AD CPD-AD CPD-AD CPD-AD0199 : Fig 1 Fitting : Fig 6 Fitting : Fig 1 Fitting : Fig 6 Fitting CF646 CF646 FD/60/1 FD/60/ Min (EN) Min (EN) Efficiency %: 70 Max Opening 0-4 (Nm): 9.6 Max Opening 0-60 (Nm): 9.63 Max Closing 4-0 (Nm):.58 Max Closing 9-88 (Nm): Efficiency %: 67 Max Opening 0-4 (Nm): 9.16 Max Opening 0 - (Nm): 9.16 Max Closing - 60 (Nm):.15 Max Closing 4-0 (Nm): The DCS4BC overhead door closer has an opening force (0- ) less than N when fitted to a minimum width door of 96mm, and has an opening force (-60 ) less than.5n when fitted to a minimum width door of 838mm tested in laboratory conditions. Therefore the suitable width of door for the DCS4BC overhead door closer fixed in the above fixing position is 96mm. The DCS5BC overhead door closer has an opening force (0- ) less than N when fitted to a minimum width door of 96mm, and has an opening force (-60 ) less than.5n when fitted to a minimum width door of 838mm tested in laboratory conditions. Therefore the suitable width of door for the DCS5BC overhead door closer fixed in the above fixing position is 96mm. Specification Cover Packs Finishes Suitable Environments Specification Cover Packs Finishes Suitable Environments Closing Force EN Size -4 Efficiency 70% Max Door Width 10mm Max Weight 80Kg Angle of Opening Max Power Adjustment by Spring Backcheck Meets recommendations of BS 80 and Approved Document M DCS4BC//FCP DCS4BC//FCP DCS4BC//FCP DCS4BC//FCP DCS4BC//FCP DCS4BC//FCP DCS4BC//FCP Closing Force EN Size -5 Efficiency 67% Max Door Width 1mm Max Weight 0Kg Angle of Opening Max Power Adjustment by Spring Backcheck Optional Delayed Action DCS5BCDA Meets recommendations of BS 80 and Approved Document M DCS5BC DCS5BC//FCP DCS5BC//FCP DCS5BC//FCP DCS5BC//FCP DCS5BC//FCP DCS5BC//FCP DCS5BC//FCP DCS5BCDA* DCS5BCDA//FCP DCS5BCDA//FCP DCS5BCDA//FCP DCS5BCDA//FCP DCS5BCDA//FCP DCS5BCDA//FCP DCS5BCDA//FCP 8 9 *Delayed Action not covered by CE or Certifire.

8 DCS6BC Overhead Door Closer Variable Power Size -6 ACCESSORIES 111-CPD-AD00 : Fig 1 Fitting CPD-AD00 : Fig 6 Fitting CF646 FD/60/ Min (EN) Efficiency %: 76.9 Max Opening 0-4 (Nm): 3. Max Opening 0 - (Nm): 3. Max Closing - 60 (Nm): 9.7 Max Closing 4-0 (Nm): 4.8 Product Finishes Product Finishes DCX7 Hold Open Arm to suit: DCS4 & DCS4BC DCS5BC & DCS5BCDA DCS6BC & DCS6BCDA DCX1 Door Closer Cover to suit: DCF The DCS6BC overhead door closer has an opening force (0- ) less than 33N when fitted to a minimum width door of mm, and has an opening force (-60 ) less than.5n when fitted to a minimum width door of 96mm tested in laboratory conditions. Therefore the suitable width of door for the DCS6BC overhead door closer fixed in the above fixing position is mm. (Power trace taken at 0 cycles). Specification Cover Packs Finishes Suitable Environments Product Finishes Product Finishes Closing Force EN Size -6 Efficiency 76% Max Door Width mm Max Weight 1Kg Angle of Opening Max Power Adjustment by Spring Backcheck Optional Delayed Action DCS6BCDA Meets recommendations of BS 80 and Approved Document M DCS6BC DCS6BC//FCP DCS6BC//FCP DCS6BC//FCP DCS6BC//FCP DCS6BCDA* DCS6BCDA//FCP DCS6BCDA//FCP DCS6BCDA//FCP DCS6BCDA//FCP DCX Door Closer Cover to suit: DCS4 DCT4 & DCT4BC DCS5BC & DCS5BCDA DCX3 Door Closer Cover to suit: DCS6BC & DCS6BCDA *Delayed Action not covered by CE or Certifire. 11

9 DCC4SM Surface Mounted Slim H.E Door Closer Power Size CPD - AD36 1 EN 1154: A1:0 + AC: CF87 FD/60/1 FD1/ 3 Min (EN) Efficiency %: 80.1 Max Opening 0 - (Nm):.4 Max Opening - 60 (Nm): 1. Max Closing 4-0 (Nm): The DCC4SM surface mounted slim H.E door closer has an opening force (0- ) less than N when fitted to a minimum width door of 747mm, and has an opening force (-60 ) less than.5n when fitted to a minimum width door of 54mm tested in laboratory conditions. Therefore the suitable width of door for the DCC4SM surface mounted slim H.E door closer fixed in the above fixing position is 747mm. Specification Cover Packs Finishes Suitable Environments Closing Force EN Size -4 Efficiency 80% Max Door Width 10mm Max Weight 80Kg Angle of Opening Max 1 Power Adjustment by Spring Slide Channel Slimline Body Meets recommendations of BS 80 and Approved Document M DCP00/ DCP00/ DCP00/ DCP00/ DCP00/ DCP00/ 13 ( = Cover Only)

10 DCC03SM Surface Mounted Slim Door Closer Fixed Power Size 3 DCC4SM/36 Surface Mounted H.E Door Closer Variable Power Size CPD - AD36 EN 1154: A1:0 + AC: CPD - AD36 EN 1154: A1:0 + AC: CF87 CF87 FD/60/1 FD/60/1 FD1/ FD1/ 36 Min (EN) 36 Min (EN) Efficiency %: 77.9 Max Opening 0-4 (Nm): 8.3 Max Opening 0-60 (Nm): 8.3 Max Closing 4-0 (Nm): Efficiency %: 79.8 Max Opening 0 - (Nm):.6 Max Opening - 60 (Nm): 1.8 Max Closing 4-0 (Nm): The DCC03SM surface mounted H.E door closer has an opening force (0- ) less than N when fitted to a minimum width door of 753mm, and has an opening force (-60 ) less than.5n when fitted to a minimum width door of 569mm tested in laboratory conditions. Therefore the suitable width of door for the DCC03SM surface mounted H.E door closer fixed in the above fixing position is 753mm. (Power trace taken at 0 cycles). The DCC4SM/36 surface mounted H.E door closer has an opening force (0- ) less than N when fitted to a minimum width door of 753mm, and has an opening force (-60 ) less than.5n when fitted to a minimum width door of 569mm tested in laboratory conditions. Therefore the suitable width of door for the DCC4SM/36 surface mounted H.E door closer fixed in the above fixing position is 753mm. Specification Cover Packs Finishes Suitable Environments Specification Cover Packs Finishes Suitable Environments Closing Force EN Size 3 Efficiency 77% Max Door Width 9mm Max Weight 60Kg Angle of Opening Max 1 Slide Channel Slimline Body Meets recommendations of BS 80 and Approved Document M DCP3/ DCP3/ DCP3/ DCP3/ DCP3/ DCP3/ DCP3/ Closing Force EN Size -4 Efficiency 79% Max Door Width 10mm Max Weight 80Kg Angle of Opening Max 1 Power Adjustment by Spring Slide Channel Meets recommendations of BS 80 and Approved Document M DCP3/36/ DCP3/36/ DCP3/36/ DCP3/36/ DCP3/36/ DCP3/36/ DCP3/36/ 14 15

11 DCC4CF Concealed Slim Door Closer Variable Power Size -4 DCC03CF Concealed Slim Door Closer Fixed Power Size CPD - AD CPD - AD36 1 EN 1154: A1:0 + AC: EN 1154: A1:0 + AC: CF87 CF87 FD/60/1 FD/60/1 FD1/ FD1/ Min (EN) Min (EN) Efficiency %: 79.8 Max Opening 0 - (Nm):.8 Max Opening - 60 (Nm): 13.5 Max Closing 4-0 (Nm): Efficiency %: 70.9 Max Opening 0-4 (Nm): 33.4 Max Opening 0-60 (Nm): 33.4 Max Closing 4-0 (Nm): The DCC4CF concealed door closer has an opening force (0- ) less than N when fitted to a minimum width door of 760mm, and has an opening force (-60 ) less than.5n when fitted to a minimum width door of 600mm tested in laboratory conditions. Therefore the suitable width of door for the DCC4CF concealed door closer fixed in the above fixing position is 760mm. The DCC03CF surface mounted H.E door closer has an opening force (0- ) less than 33N when fitted to a minimum width door of 797mm, and has an opening force (-60 ) less than.5n when fitted to a minimum width door of 600mm tested in laboratory conditions. Therefore the suitable width of door for the DCC03CF surface mounted H.E door closer fixed in the above fixing position is 797mm. (Power trace taken at 0 cycles). Specification Accessories Finishes Suitable Environments Specification Accessories Finishes Suitable Environments Closing Force EN Size -4 Efficiency 79% Max Door Width 10mm Max Weight 80Kg Angle of Opening Max 1 Power Adjustment by Spring Slide Channel Slimline Body Meets recommendations of BS 80 and Approved Document M Arm Only DCX0/ DCX0/ DCX0/ Intumescent Pack INT4 Closing Force EN Size 3 Efficiency 70% Max Door Width 9mm Max Weight 60Kg Angle of Opening Max 1 Slide Channel Slimline Body Meets recommendations of BS 80 and Approved Document M Arm Only DCX0/ DCX0/ DCX0/ Intumescent Pack INT4/

12 DCC4CF/36 Concealed H.E Door Closer Variable Power Size -4 ACCESSORIES CPD - AD36 1 EN 1154: A1:0 + AC: CF87 FD/60/1 FD1/ 5 36 Min (EN) Efficiency %: 77.8 Max Opening 0 - (Nm): 3.9 Max Opening - 60 (Nm): 13.5 Max Closing 4-0 (Nm): 18.6 Product Finishes Product Finishes DCX0 Plated Arm to suit: DCC4SM & DCC4SM36 DCX03 Chanel Forend to suit: DCC4SM & DCC4SM36 DCC03SM DCC03SM DCC4CF & DCC4CF36 DCC4CF & DCC4CF The DCC4CF/36 concealed door closer has an opening force (0- ) less than N when fitted to a minimum width door of 797mm, and has an opening force (-60 ) less than.5n when fitted to a minimum width door of 600mm tested in laboratory conditions. Therefore the suitable width of door for the DCC4CF/36 concealed door closer fixed in the above fixing position is 797mm. Specification Accessories Finishes Suitable Environments Product Finishes Product Finishes Closing Force EN Size -4 Efficiency 77% Max Door Width 10mm Max Weight 80Kg Angle of Opening Max 1 Power Adjustment by Spring Slide Channel Meets recommendations of BS 80 and Approved Document M Arm Only DCX0/ DCX0/ DCX0/ Intumescent Pack INT4/36 DCX3/36 Door Closer Cover to suit: DCC4SM/36 DCC03SM/36 DCX3 Door Closer Cover to suit: DCC4SM 18 19

13 DCFS1/EN3 & DCFS/EN4 Double Action Floor Spring 5kg & 1kg DCTS0/EN3 & DCTS1/EN4 Concealed NHO Transom Closer Power Size 3 & Power Size 4 with Side Load Accessories Dust Cap DCFS1/EN3 5Kg DA Floor Spring Accessories Finishes Suitable Environments DCTS0/EN3 Accessories Finishes Suitable Environments Closing Force EN Size 3 Max Door Width 9mm Max Weight 5Kg Angle of Opening Max 1 Intumescent Pack INT0 Available CPD - AD37 EN 1154: A1:0 + AC: FD60 Left Hand Accessory Packs DCXF5L/ DCXF5L/ DCXF5L/ Right Hand Accessory Packs DCXF6R/ DCXF6R/ DCXF6R/ Cover Plates DCXF7 DCXF7 Interchangable Spindles 5mm DCXF8A mm DCXF8B 15mm DCXF8C mm DCXF8D 5mm DCXF8E mm DCXF8F Closing Force EN Size 3 Efficiency 63% Max Door Width 9mm Max Weight 5Kg Angle of Opening Max 1 Year Mechanical Guarantee HO Mechanism Only Version Available DCTS0/EN3/HO Side Load Accessory Pack DCXT0/SL DCFS/EN4 1Kg DA Floor Spring Accessories Finishes Suitable Environments DCTS1/EN4 Accessories Finishes Suitable Environments Closing Force EN Size 4 Max Door Width 10mm Max Weight 1Kg Angle of Opening Max 1 Left Hand Accessory Packs DCXF5L/ DCXF5L/ DCXF5L/ Right Hand Accessory Packs DCXF6R/ DCXF6R/ DCXF6R/ Cover Plates DCXF7 DCXF7 Interchangable Spindles 5mm DCXF8A mm DCXF8B 15mm DCXF8C mm DCXF8D 5mm DCXF8E mm DCXF8F Closing Force EN Size 4 Efficiency 63% Max Door Width 10mm Max Weight 1Kg Angle of Opening Max 1 Year Mechanical Guarantee HO Mechanism Only Version Available DCTS1/EN4/HO Side Load Accessory Pack DCXT0/SL 1

14 HN10 & HN19 Thrust Bearing Pivot Set & Emergency Release Door Stop BS EN 1155:1997 Explained BS EN 1155:1997 is the European standard for controlled door closing devices and, as such, tests mechanical door closer performance. Adopted by EU member states, it became a mandatory requirement for CE marking in 04. It prescribes the test methodology and subsequent classification of randomly selected production line products. The test data, together with supporting technical evaluation, results in a classification code. This coding allows comparison across a range of closers according to their compliance with the standard Electrically powered hold open devices for fire doors are covered by a Constructive Products Directive mandate. Compliance with BS EN 1155:1997, supported by suitable evidence, therefore allows the application of the CE mark. All conforming door closers consequently will be marked with their BS EN 1155:1997 coding and details of the notified certification body Door controls with electrical components, such as electromagnetic hold open devices, must also satisfy the requirements of both :1996 and the supplementary standard, BS EN 1155:1997 for electrically controlled door operators Door Size/Mass Five door mass grades and related hold-open power sizes are identified according to Table 1 of this European standard. Where an electrically powered hold-open device is suitable for a range of door closers power sizes, both the minimum and maximum power sizes should be shown. HN10 Thrust Bearing Pivot Set Radius Version Available HN10/R Max Weight 80Kg (Frame/Wall Mounted) Max Weight 1Kg (Floor Mounted) Stainless Steel Construction Phospher Bronze Thrust Bearing Suitable for use in hospital/ disabled toilets Finishes Suitable Environments Category of Use Only one category of use is identified for electrically powered hold-open devices. Grade 3 - For doors for use by the public, and others with little incentive to take care. i.e. where there is some chance of misuse of the door. Note: For electrically powered hold-open and free-swing door closers, where the opening angle is limited by the device, provision of a separate door stop should be used. Table 1 Closer Size Max Door Size 3 9mm - 60Kg 4 10mm - 80Kg 5 1mm - 0Kg 6 mm - 1Kg mm - 160Kg Corrosion Resistance A salt spray test to ascertain corrosion resistance thereby establishing suitability for use in varying environmental conditions. Five grades are identified from 0 (no identified resistance) to 4 (very high resistance). All Carlisle Brass closers achieve at least Grade 3 and are suitable for use in wet, polluted environments and most exterior applications. HN19 Emergency Release Door Stop Finishes Suitable Environments Test Cycles Two test durations are identified for devices manufactured to this European standard. Grade 5 -,000 test cycles. For all electrically powered hold-open devices. Grade 8-0,000 test cycles. For all electrically powered hold-open and free-swing door closers and devices that contain operating arms. Safety Electrically powered hold-open devices are required to satisfy the Essential Requirement of safety in use. Therefore only grade 1 is identified. Secure (Pin-Lok) Release Stainless Steel Construction Suitable for use in hospital/ disabled toilets Fire Resistance Only one grade of fire resistance is identified for electrically powered hold-open devices manufactured to this European standard: Grade 1 - Suitable for use on fire/smoke door assemblies subject to satisfactory assessment of the contribution of the electrically powered hold-open device to the fire resistance of specified fire/smoke door assemblies. 3

15 DCCEM4 Electromagnetic HO/FS Door Closer Variable Power Size -4 DCEM03 Electromagnetic HO/FS Door Closer Fixed Power Size CPD - AD0191 EN 1154: A1:0 + AC: CPD - AE01 EN 1154: A1:0 + AC: EN 1155: A1:0 + AC: BS EN 1155 EN 1155: A1:0 + AC: BS EN 1155 FD/60/1 FD/60/1 EL E C TR ICAL EL E C TR ICAL Min (EN) Efficiency 0-4 %: 78 Max Opening 0-4 (Nm): 3.4 Max Opening 0 - (Nm): 3.4 Max Opening - 60 (Nm): 1. Max Closing 4-0 (Nm): The DCCEM4 surface mounted H.E door closer has an opening force (0- ) less than N when fitted to a minimum width door of 781mm, and has an opening force (-60 ) less than.5n when fitted to a minimum width door of 573mm tested in laboratory conditions. Therefore the suitable width of door for the DCCEM4 surface mounted H.E door closer fixed in the above fixing position is 781mm. Specification Finishes Suitable Environments Specification Finishes Suitable Environments Closing Force EN Size -4 Efficiency 78% Max Door Width 10mm Max Weight 80Kg Angle of Opening Max 1 Power Adjustment by Spring Year Electrical Guarantee Slide Channel Meets recommendations of BS 80 and Approved Document M SS Closing Force EN Size 3 Max Door Width 9mm Max Weight 60Kg Angle of Opening Max 170 Hold Open Swing Free Arm Included Year Electrical Guarantee Meets recommendations of BS 80 and Approved Document M EB PC SS 4 5

16 DCEM04 Electromagnetic HO/FS Door Closer Fixed Power Size 4 ELECTROMAGNETIC ACCESSORIES 11 - CPD - AE01 EN 1154: A1:0 + AC: EN 1155: A1:0 + AC: BS EN 1155 FD/60/1 EL E C TR ICAL Product Finishes Product Finishes DEFB0 Floor Mounting Bracket DEM0F Flush Mounted Wall Magnet SS Specification Finishes Suitable Environments Product Finishes Product Finishes Closing Force EN Size 4 Max Door Width 10mm Max Weight 80Kg Angle of Opening Max 170 Hold Open Swing Free Arm Included EB PC SS DEM0S Surface Mounted Wall Magnet EL E C TR ICAL SS PSUA8/WHT 1 Amp 4v DC Power Supply Unit Optional Special Order Only: 3 Amp PSUA8/3/WHT 5 Amp PSUA8/5/WHT WHT Year Electrical Guarantee Meets recommendations of BS 80 and Approved Document M * see page 8 for technical details. 6 7

17 Transformer Rectifiers Explained... ANCILLARY PRODUCTS AA45 Concealed Chain Spring Door Closer Finishes Suitable Environments PSUA8/WHT = 1 Amp Will power upto 6 units when using 1.5mm wire or will power upto 8 units when using.5mm wire PSUA8/3/WHT = 3 Amp* Will power upto 18 units when using either 1.5mm or.5mm wire. PSUA8/5/WHT = 5 Amp* Will power upto 44 units when using 1.5mm wire or will power upto units when using.5mm wire. Radius Version Available AA45R R.5 CP PB SC Rating: 1A@4v dc Rating: 3A@4v dc Rating: 5A@4v dc Input Voltage: AC, AC Output Volts: 4v dc Floating Voltage: Input Voltage: AC, AC Output Volts: 4v dc Floating Voltage: Input Voltage: AC, AC Output Volts: 4v dc Floating Voltage: *Special Order Only *Special Order Only FD NOTE: metre max total cable length from power supply unit for above calculations. As a guideline e.g if using 0m of cable, reduce the amount of unit coverage by %. CDC85/R Adjustable Jamb Mounted Door Closer Finishes Suitable Environments 59.4 Max Door Width 9mm SC Max Weight 80Kg 5.5 Angle of Opening Max Transformer Rectifiers 4V DC Our range of Transformer Rectifiers are designed for our DCEM range of Electronic door closers where a smooth 4v dc supply is required. Each power supply features full monitoring of all circuitry with fault conditions displayed by means of a single yellow LED indicator The Transformer Rectifiers will also monitor mains fail and output fuse fail. The output voltage is regulated throughout the Transformer Rectifier range and all models are able to supply full rated output. Our Transformer Rectifiers have a relay fitted which controls the output in either energised or de energised state through two methods of switching. The relay can be triggered by either applying 4v to coil from a remote source or through the use of a remote volt free switch connected to the THRU LINK terminals. The relay can be operated by any external switching source such as a fire alarm panel or other control system. FD/ Our Transformer Rectifiers also feature the incorporation of an additional fault relay which can be used to signal the power supply status to a remote monitoring system, remote indicator or buzzer unit. In addition the relay can also be used to provide an input to an addressable switch monitor in order to make the Transformer an integral part of any addressable system. CDG003 Contract Overhead Door Closer Fixed Power Size 3 Closing Force EN Size 3 : Fig 1 Fitting Finishes Suitable Environments All Transformer Rectifiers we supply carry the CE mark and are fully compliant with the LVD9 Low Voltage Directive. Efficiency 66% Max Door Width 9mm Max Weight 60Kg Angle of Opening Max : Fig 6 Fitting Fully compliant with LVD9 low voltage directive. Year Mechanical Guarantee CE marking. Suitable for all options of fire alarm systems. In-built relay. THRU LINK terminals to suit older fire alarm systems. FD/60 8 9

18 Troubleshooting and Maintenance Fitting Applications 1. Check that all instructions provided by the manufacturer are adhered to and that the door closer closes the door correctly.. Ensure that all fixing screws, including the connection of arm to body are tight. 3. Check the spring strength is set correctly and adjust if necessary. Our comprehensive range of Enduro and Enduromax door closers all come with detailed fitting instructions and technical information. The three common ways to fit surface mounted overhead closers are as follows. The full range of fitting instructions in PDF format can be obtained from 4. Perform checks on any controls relating to delay, closing speed, latching action and back check, and adjust as required. 5. Lightly lubricate arm joints and rollers with light oil or grease. 6. Ensure that at all times, care and maintenance are carried out by competent personnel and that records are kept. 7. Use chart below as a guide to checking your doorset. Figure 1 (Fig 1) Straight Arm ; Standard Application The closer is mounted on the pull side of the door with the arm fixed to the frame on the hinge knuckle side of the door. Door closer cannot close easily Door Application: Offices, stores, toilets etc, where doors open into areas which are usually small. For o/hd closers disconnect arms Does closer mechanism operate freely? NO Adjust or replace door closer YES Does the door move freely? YES NO Are the hinges plumb? YES Are the hinges stiff? NO YES Adjust or ease hinges Lubricate hinges Figure 66 (Fig 66) (Fig 6) Parallel Arm Application The closer is mounted on the push side of the door and the arm is fixed to the Figure 66 bracket, parallel to the door on the opposite side of the door to the hinge knuckle. Door Applications: Doors opening outwards to exterior, where aesthetics or space mean Figure 1 cannot be used. Re-connect closer arms NO Is the door scraping the floor? YES Re-hand door or plane bottom rail NO Is latch resistance too strong? YES Adjust strike plate and lubricate latch NO Is the door catching the frame? YES Ease door and/or frame Figure 61 (Fig 61) Transom Mounted Application Is the closer correctly installed? Is the closer the right size for the door? NO NO Re-position closer according to template/instructions Replace closer or adjust spring strength where possible The closer is mounted on the push side of the frame over the door and the arm is fixed to the door on the opposite side to the hinge knuckle. Door Applications: Doors where there is insufficient material in the top rail to allow the closer to be fitted on glazed doors with unsufficient fixing for closer body. Door closer closes the door easily 31

19 3 Index AA ,17 13,15,16, CDC85SC/R CDG003 DCC03 DCC4 DCCEM4 DCEM03 DCEM04 DCF03 DCFS1 DCFS DCS4 DCS5 DCS6 DCT4 DCTS0 DCTS1 DCX0 DCX03 DCX7 DCX1 DCX DCX3 DCX3 DCXF5 DCXF7 DCXF8 DCXT0 DEFB0 DEM0 HN10 HN19 PSUA8

20 Notes

21 Carlisle Brass Parkhouse Road Carlisle CA3 0JU Web: Tel: Fax: