No-touch washrooms by

Transcription

1 No-touch washrooms by

2 Welcome Specialising in water saving technology for commercial washrooms, Dart Valley Systems has been producing leading automatic washroom technology for over 25 years. Dart Valley Systems DVS is a market leader in the field of water saving products along with automatic washroom products for specialist applications, including the healthcare, mental healthcare, custodial and public sector markets. Alongside the extensive product portfolio of WC flushvalves, urinal controls, automatic taps, safe ensuites and water management controls, an expert team of engineers are on hand to support installations, whilst our technical sales teams give tailored project support and specification advice. Combining the benefits of reduced water consumption with a focus on hygienic design, DVS products have been used reliably in some of the most demanding commercial environments for many years. * * *Not applicable to all products. For full details of WRAS and ECA approved products please contact DVS.

3 contents contents Wc FLUsHiNG WC Flushvalve Dimensions Product codes UriNAL controls Urinal controls Urinal sleeves Dimensions Product codes No-ToUcH TAps No-touch taps Tap control system...26 Tap spouts...26 Dimensions Product codes push TAps Push taps Dimensions...38 Product codes...39 showers & BATH FiLLiNG Shower towers Individual showerheads...42 Individual push taps for showers...42 Temperature blending valve adjuster...42 Shower control system...43 Bath filling...43 Dimensions Product codes WATer MANAGeMeNT Overflow Detection System...51 Water Isolation System...51 Flow Restriction Valve...52 Dimensions...52 Product codes...53 WAsHrooM sanitaryware Ceramics...55 Doc M pack...55 Dimensions...56 Product codes...57 WAsHrooM HYGieNe Washroom fragrancing...59 Virtual Janitor...59 Automatic hand dryers...60 Automatic soap dispensers...61 Baby changing...61 Dimensions...62 Product codes...63 safe ensuites High security sanitaryware Washroom control system...67 Complete safe ensuite packages Dimensions Product codes HeALTHcAre Healthcare AquariTherm...82 Surgeons scrub-up troughs...83 Clinical automatic taps...84 Maintaining good water quality...85 Ready plumbed modules...85 Dimensions Product codes Should you have any queries regarding products for your particular application please do not hesitate to call our sales office on or sales@dartvalley.co.uk Accessories TMV3 Thermostatic mixing valves...92 Dimensions...93 Product codes...94 Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 1

4 D RT Wc Flushing Wc FLUsHiNG DVS WC FLUSHVALVE S LLEY SY S VA V R CDA D CDART VALLEY SYSTEMS DART VALLEY SYSTEMS DART VALLEY SYSTEMS DART V DA D Innovation & Technology Award Winner A hygienic washroom solution; A range of no-touch flush options are combined with leading flushvalve technology to deliver considerable water savings. Stylish and discreet, our range of no-touch WC flushing options can be retro fitted or installed at new build stage. WC Flushvalves with sensors and backplates WC Flushvalves offer an average of 30% water saving... MANUFACTURED 2 IN THE UK

5 The DVS no-touch WC flushing system is an electronically operated drop valve which replaces the traditional syphon and delivers a measured volume of water from the cistern to the lavatory bowl. A simple wave of a hand past the fitted sensor will activate the electronic Flushvalve. Wc Flushing Offering reduced water consumption, the optimum quantity of water from each flush is pre-set and accurately controlled. The easy to use no-touch WC flushing system is triggered by an electronic infrared sensor which is activated when the user s hand comes within 50mm of the sensor. With no handles to touch, the risk of cross infection is eliminated. Features include: 4.5 litre flush Typical 30% savings on water costs Adjustable for optimum flush Improves flush Ideal for disabled or elderly Hygienic no-touch operation Optional tactile operation Easy to install and maintain Fits existing and new WCs Vandal proof Eliminates handle maintenance Dual flush Wave-on or fully automatic flush Lock outs (for custodial and mental health) Increased ambient temperature (55º) Purge facility HoW it WorKs standard setup Control box (PCB) Isolating valve (not supplied) Wave-on sensor Wc WC Flushvalve with built-in overflow Alternative sensor mounting (where cistern is exposed) Electronically operated, the Flushvalve delivers a measured volume of water upon activation. The timer can be adjusted to any setting between 1 and 6 seconds, to deliver the optimum flush. The Flushvalve is activated when the user s hand passes within 50mm of the sensor (tactile push sensors can be fitted if required). A 35 second delay mechanism prevents abuse between flushes by the user. An electromagnetic solenoid coil is central to the operation of the Flushvalve. Upon activation, an electromagnetic field is created within the upper part of the body. This draws up a metal piston which instantly opens the valve and releases the water full bore through the flush pipe into the WC. At the end of the timed flushing cycle, the electrical supply is cut off, thereby deactivating the solenoid and returning the valve to its normally closed position. The flush repeatability is very accurate. Flushvalve in cistern IPS panel WC pan Our safe and reliable system contains few moving parts, requires no maintenance and is easily installed in existing and new cisterns using industry standard fittings. Typical installation diagram intended as a guide only and appropriate regulations should be adhered to. Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 3

6 Wc Flushing WC Flushvalves are fitted in a wide variety of commercial and public buildings, and have proven to be a tried and tested solution, unchallenged in performance and reliability, offering a robust vandal proof solution. DVS Flushvalves are used widely in hospitals to help reduce healthcare acquired infections. No-touch WC flushing stops hand contact with potentially contaminated handles. Water saving is important to everybody and retro-fitting WC Flushvalves can save an enormous amount of water in busy public toilets. The reliability, robustness and vandal proof nature of the DVS WC Flushvalve also makes it an ideal choice for schools and colleges, eliminating the nuisance of term time maintenance. WC Flushvalves have been fitted in most of the busiest UK airports and are proven to be unchallenged in performance and reliability, with the busiest cubicles peaking at nearly 400 flushes per day. Wc FULLY AUTo FLUsHVALVe Ensures toilet is flushed! The WC Fully Auto Sensor can be mounted behind the toilet to detect a user for fully automatic flushing used in conjunction with a WC kit or retro-fitted later. If the user does not operate the manual flushing sensor the toilet will flush automatically a few seconds after they have left the toilet area. The WC Fully Auto Flushvalve uses the same Flushvalve as the standard no-touch WC Flushvalve; with all the same features and benefits but with the added Auto Sensing facility. sensors Wave-on sensors or tactile switches are available, both with either 38mmø or 50mmø bezels. Ac Wave-on sensor with 38mmø chrome bezel Ac Wave-on sensor with 50mmø chrome bezel Ac Wave-on sensor with 50mmø brushed bezel and blue (cold) insert Ac Tactile switch with 50mmø s/steel bezel and blue (cold) insert WC Auto Flush Sensor This additional sensor is designed to detect an occupier. If the optional manual sensor is not operated it will flush automatically. Wc Fully auto sensor with 63mmø chrome bezel. MANUAL override DUAL FLUsH plate Wc Auto sensor with 63mmø chrome bezel. Backplates Wc mmø chromed brass The standard kit includes the DVS 80mmø backplate and 38mmø bezel. Wc Manual Override Plate Wc Dual Flush Plate 4 Dart Valley systems t: f: e: sales@dartvalley.co.uk w:

7 Dimensions Wc Flushing standard KiT parts Full flush back plate Wc CUT TO SUIT CISTERN CHARGE POWER 185 TOUCH FREE 120 Half flush back plate Wc ø Wc WC Flushvalve Wc Control box (PCB) Wc mmø disabled back plate Wc mmø back plate Cable length: 3m Fixing: Standard 11/2 (2 available) Mains cable length: 1.5m Suitable only for 16mm threaded sensors with either 38mmø or 50mmø bezels. If required for other sensors please enquire. Suitable only for 16mm threaded sensors with 38mmø bezels. If required for other sensors please enquire Ac Wave-on sensors with 38mmø and 50mmø bezels Cable length: 3m Fixing: 3/8 BSP Ac Anti-vandal wave-on sensor with 50mmø bezel Cable length: 3m Fixing: 1/2 BSP Ac (blue insert) Tactile switch with 50mmø bezel Cable length: 3m Fixing: 1/2 BSP Wc AUTO sensor with 63mmø bezel Cable length: 3m Fixing: 1/2 BSP (22mmø clearance drill hole) (17mmø clearance drill hole) Fixing for extension: 3/8 BSP (22mmø clearance drill hole) Fixing for extension: 3/8 BSP (22mmø clearance drill hole) Please note: Illustrations not to scale Major clients include: BAA Airports Marks & Spencer Tesco NHS Estates Corporation of London Local Authorities Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 5

8 WC Flushing Dimensions Accessories 330 D811/FLUSHPIPE/38-1 1/2 to 1 1/2 (A) D811/FLUSHPIPE - 2 to 1 1/2 (B) A = 430 B = A = 430 B = 500 WC Concealed plastic cistern WC ½ x 1½ (A) Flushpipes WC ½ x 2 (B) Flushpipes WC Wall conduit for Flush Plates /2 BSP OUTLET WC Concealed plastic cistern - Vertical WC Air break (back flow preventer) for WC Fixing: 28mm inlet 38/40mm outlet. Reducing sets available to reduce 28mm inlet to 22mm. WC Flushvalve Manual Override Plate: Can be fitted to IPS panels or wall upto 120mm thick WC Half Flush Full Flush Plate: Can be fitted to IPS panels or wall upto 120mm thick Please note: Illustrations not to scale AT Classic Tap in Chrome WC WC Flushvalve with sensor 6

9 CHARGE POWER CHARGE POWER CHARGE POWER WC FLUSHING WC Flushing Kits Kits Standard kits come with a Flushvalve, control box (PCB), 80mmø chrome backplate and wave-on sensor with 38mmø bezel. The WC Flushvalve has a cable length of 3m. Flushvalve Bases Alternative Flushvalve bases are available. Please advise the type you require i.e. 1 1/2, 2 or connections for specific cisterns. Slimline Flushvalve Valves for slimline in wall cisterns. Special bases available for existing in wall cisterns. WC Flushing Profile (Not to scale) Code Description WC WC WC WC WC WC WC WC Standard WC Flushvalve kit with in-built overflow and wave-on sensor - 1 1/2 base Standard WC Flushvalve kit with in-built overflow and wave-on sensor - 2 base Version 2 Flushvalve kit with Geberit fitting base - c/w 3m cable Version 2 Flushvalve kit with Grohe fitting base - c/w 3m cable Version 2 Flushvalve kit with 1 1/2 fitting base c/w 15m cable Version 2 Flushvalve kit with 2 fitting base c/w 15m cable Standard WC Flushvalve kit with 50mm Chrome bezel WC Flushvalve kit with in-built overflow and anti-vandal wave-on sensor - 1 1/2 base WC WC WC AC AC AC AC WC WC Flushvalve kit with in-built overflow and tactile switch - 1 1/2 base Version 2 Flushvalve 1 1/2 c/w Manual Overide kit (Excluding conduit kit) Standard WC direct flushing system kit - 220v! Notes: Conduit kit required for wall thicknesses up to 120mm. See page 8. 38mm Chrome wave on sensor pack c/w 3m cable 38mm Chrome wave on sensor pack DVS backplate c/w 3m cable 38mm Chrome wave on sensor pack c/w 15m cable 38mm Chrome wave on sensor pack DVS backplate c/w 15m cable Infra-red sensor for the AUTO Flushvalve (price includes bezel)! Notes: The AUTO version of the WC Flushvalve uses an extra sensor to detect and is used in conjunction with the kits above. Accessories & Replacement Parts Profile (Not to scale) Code Description AC AC AC AC Standard wave-on sensor included in WC kits (price excludes bezel) - c/w 3m cable Extra long cables are available, but must be specified when ordered. Wave-on sensor (price excludes bezel) - c/w 15m cable 38mmø chrome bezel for wave-on sensor - Normally used with 80mmø backplate 50mmø chrome bezel for wave-on sensor - Normally used on exposed cistern WC mmø chrome back plate Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 7

10 WC Flushing WC FLUSHING Anti-Vandal Sensors Standard sensors and bezels are relatively vandal proof. If fixing to walls of 100mm or more, or if serious vandal resistance is required please consider the AC anti-vandal sensor and appropriate extension. Sensor Thread Lengths Standard kits have sensors with 35mm long threads suitable for maximum panel thickness of 18mm. For fixing to thicker walls please order extensions. Accessories & Replacement Parts Profile (Not to scale) Code Description WC mmø chrome back plate - Full flush WC mmø chrome back plate - Half flush TOUCH FREE WC mmø stainless steel disabled back plate (larger plate with larger type and graphics) AC mmø stainless steel bezel for wave-on sensor AC AC AC AC WC WC WC Anti-vandal wave-on sensor with 50mmø stainless steel bezel - c/w 3m cable Tactile switch with Blue insert and 50mmø stainless steel bezel - c/w 3m cable Anti-vandal wave-on sensor with 50mmø stainless steel bezel Blue insert c/w 15m cable Tactile switch with Blue insert and 50mmø stainless steel bezel c/w 15m cable! Notes: Primarily for use in custodial applications. Manual Overide Wall Fitting, Plate and Sensor for V2 WC Flushvalve Dual Flush Wall Fitting Plate for V2 WC Flushwave c/w 2 tactile switches Wall conduit for Flush Plates AC AC AC Sensor thread extension for 70mm wall thickness Sensor thread extension for 150mm wall thickness Sensor thread extension for 250mm wall thickness A B C D WC WC WC WC WC WC WC WC Flushvalve with in-built overflow (valve only) - 1 1/2 base Flushvalve with in-built overflow (valve only) - 2 base Flushvalve with in-built overflow (valve only) - Grohe fitting base Flushvalve with in-built overflow (valve only) - Geberit fitting base Flushvalve with in-built overflow (base only) - 1 1/2 base (A) Flushvalve with in-built overflow (base only) - 2 base (B) Flushvalve with in-built overflow (base only) - Geberit fitting base (C) Flushvalve with in-built overflow (base only) - Grohe fitting base (D) WC Flushvalve replacement body 8 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

11 WC FLUSHING Flushvalve Bases Available in 1 1/2 BSP, 2 BSP and to suit various in-wall cisterns. If the fitting you require is not shown please contact our sales team on WC Flushing Accessories & Replacement Parts (continued) Profile (Not to scale) Code Description WC WC Flushvalve replacement stainless steel piston and spring - Suitable for all models Flushvalve replacement spring only - Suitable for all models WC WC Control box (PCB) for WC Flushvalves Control box (PCB) for D v WC WC WC WC WC WC WC WC WC Concealed plastic cistern kit - 1 1/2 Concealed plastic cistern kit - 2 Concealed plastic cistern - Cistern only - 1 1/2 Concealed plastic cistern - Cistern only - 2! Notes: Kit Includes cistern, float valve, flushpipe and fittings for back of pan. Concealed plastic cistern kit - Vertical - 1 1/2 Concealed plastic cistern kit - Vertical - 2 kit Concealed plastic cistern - Vertical - Cistern only - 1 1/2 Concealed plastic cistern - Vertical - Cistern only - 2! Notes: Kit Includes cistern, fixing plates, float valve, flushpipe and fittings for back of pan. WRAS approved side entry valve - Individual WC Delayed fill float valve Individual A B WC WC WC WC Standard 38mm flushpipe (430 x 430) - 1 1/2 to 1 1/2 50mm to 38mm flushpipe (340 x 500) - 2 to 1 1/2 Flushpipe connector Toilet tank reduction bag! Notes: Expands when placed inside cistern and saves 1 litre per flush. WC WC airbreak (back flow preventer) - 28mm inlet 38/40mm outlet Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 9

12 D RT Urinal controls UriNAL controls DVS FLUSHMATIC S LLEY SY S n i r nmenta v ro VA V R CDA t l Pro D CDART VALLEY SYSTEMS DART VALLEY SYSTEMS DART VALLEY SYSTEMS DART V DA D r duct Product Environmental Env Best of Australia 2003 Offering substantial water savings and a short payback period, installing urinal controls is often the first step in a water management programme. Urinal controls also ensure that washrooms remain clean and fresh, by programming the controls to meet the individual needs of each building. Urinal control system Urinal controls offer an average 55%-65% water saving... MANUFACTURED 10 IN THE UK

13 The DVS urinal control range has been designed and developed over years of experience working in washrooms. The units are easy to install and extremely versatile in their operation. Urinal controls Variable settings allow adjustable time delays between flushing, providing maximum efficiency and savings. Operation is simple; A passive infrared (PIR) detector detects movement within the sensing area, switching the unit into a timing mode. After a pre-set time, the separately installed solenoid valve opens. Water flows into the cistern and therefore activates the flushing cycle. The fill-time for the cistern can be customised by the user, using the appropriate switches on the Flushmatic board. The system s fast fill design helps eliminate scale problems associated with slow or drip fed systems. An automatic flush every 12 hours is also programmed into the unit, should the system not be used during that time. Variable settings allow adjustable time delays between flushing, providing maximum efficiency and savings. Flushmatic downlighter Common Features Up to 80% savings on water costs Extremely reliable Low maintenance 2 year guarantee Low power consumption Solenoid valve included Includes power PSU or batteries Adjustable fill time (15 mins max) Adjustable delay time Janitorial flush (After 12 hours of non-use) Service contracts available HoW THeY WorK DVS supply a range of urinal controls for individual or multiple station urinals. Optimum solutions are available to suit every application. The Flushmatic urinal control is used for multiple station urinals and can be surface or ceiling mounted. This works by using a passive infrared (PIR) detector which detects movement within the sensing area, switching the unit into a timing mode. After a pre-set time, the solenoid valve opens allowing water to flow into the cistern activating the flushing cycle. The fill-time for the cistern can be customised by the user using the appropriate switches on the Flushmatic board. There is also a set of dip switches to adjust the time delay after activating the PIR. The system s fast fill design helps eliminate scale problems associated with slow or drip fed systems. An automatic janitorial flush every 12 hours is also programmed into the unit, should the system not be used during that time. The individual sensing urinal control systems are designed to detect individual users and only flushes when the user walks away. DVS offer kits for single or double bowl requirements. Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 11

14 Urinal controls Installing just 3 DVS urinal controls can save enough water to fill an Olympic sized swimming pool in just 1 year! UriNAL controls Uc Pearl downlighter (small downlighter size) Flushmatic - Surface Mount The standard Flushmatic is a wall or ceiling surface mounted urinal control for multiple station urinals. Special Features Uc Flushmatic surface mount Timed urinal flushing Valve open button Ceiling or wall mountable Available in mains or battery Battery low detection and indication (optional) Pearl The Pearl is a suspended ceiling urinal control for multiple station urinals. This unit is the size of a mini-downlighter and incorporates low battery indication. Special Features Occupancy detection and indication (indicated by a flashing green light) Battery low detection and indication (indicated by a flashing red and green light) Valve closed before battery failure (indicated by a flashing red light until total battery loss) Timed urinal flushing Valve open button Available in mains or battery Flushmatic - Downlighter The Flushmatic downlighter is a suspended ceiling urinal control for multiple station urinals. Special Features Uc Flushmatic downlighter (standard downlighter size) Flush ceiling mounted As Surface Mount Flushmatic (except fitting) Our range of urinal controls are suitable for individual or multiple station urinals. Optimum solutions are available to suit every application. Individual Control System The individual operation urinal control system can be supplied for single or double station urinals. Standard sensor comes with 50mmø bezel. Special Features Uc Urinal control system Single or double station urinal flushing Only flushes when user walks away from urinal Mains power only Major clients include: Ministry of Defence Tesco BAA Airports Road Chef Local Authorities Marks & Spencer 12 Dart Valley systems t: f: e: sales@dartvalley.co.uk w:

15 Urinal controls case study Churston Ferrers Grammar School Churston Ferrers Grammar School was selected by OGC buying solutions to provide a detailed case study with a well managed school to establish some guidelines on realistic cost effective savings for water management, with DVS selected as the ideal partner to deliver technical advice, product recommendations and high quality water saving products. By installing urinal controls, flushvalves and push taps, considerable water efficiencies were achieved. Water savings of 46% in the year following installation When the school site was reviewed, DVS established that the majority of urinal controls were not functioning correctly, which the school had been unable to identify. This is common in schools where urinal controls have been fitted in the last years. Old urinal controls were one of the biggest sources of waste Just 1 in 7 of the old controls were operational WC Flushvalves fitted in the busiest female WCs Displacement bags fitted in cisterns of low traffic male WCs Phase 2 of the project revealed the poor state of the existing push taps in all but one new toilet block. Replacement and upgrading took place as and when refurbishments were undertaken. Old push taps resulted in excessive water flow and run time New water efficient self closing non-concussive taps were installed The school also has evening classes, a swimming pool and sports hall used by members of the public, however by tackling the main water saving areas the level of savings achieved has been maintained over the following years bringing the school up to best practice standards, whilst offering consistently high levels of hygiene. 6 new urinal controls were fitted, plus a maintenance contract to ensure optimum long term savings With around 450 female staff and pupils, and WCs flushing 9 to 11 litres per flush, DVS recommended fitting electronic WC Flushvalves in the 15 busiest ladies toilets. Whilst the WC Flushvalves could also provide savings in the male WCs, the use was not so high and the payback period longer, so after evaluation DVS recommended an alternative low cost solution using 1 litre displacement bags to reduce water consumption without compromising the efficiency of flushing. Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 13

16 Urinal controls DVS has developed two powerful Urinal Sleeve solutions to help reduce smells and blockages and also save water. UriNAL sleeves Unpleasant smells and blockages Gents toilets frequently have problems with unpleasant smells of urine and blocked flushpipes putting bowls out of use. Conventional urinal blocks inside the bowl can add to the problem and increase the potential for blockages. Unfortunately these blocks only attempt to mask the unpleasant smells and provide no real long-term solution. Cure the problem at source! The DVS Urinal Sleeve helps to prevent the problems which contribute to urinal odours. After the initial Urinal Sleeve outlet is installed the replacement sleeves simply drop into place. Timed Urinal Control System Although the biological version of the Urinal Sleeve is an effective waterless solution, a more effective result for high traffic areas can be achieved by periodically flushing the urinals with clean water. This helps keep the urinal clean and also re-activates the block inside the head of the urinal sleeve. DVS solution for achieving periodical flushing is the Timed Urinal Control System. This is a programmable control system that can be customised to achieve the number of flushes required. The Urinal Sleeve lower body lines the waste outlet and trap just above the water level. This feature not only prevents leaking and staining from waste connections, but is also removed and discarded periodically as part of the refill, thus ensuring the lining is kept clean. The most important feature of the Urinal Sleeve is housed within its cone shaped head. This contains a cleaner deodoriser block which both reduces bio-film build up, reduces the odour and scale in the outlet and helps prevent blockages. The teardrops on the side of the cone allow urine to pass onto the active ingredient, thus activating and transferring the cleaner deodoriser via the sleeve to the trap where they act on the urine preventing the foul odours. The block also contains a fragrance to provide a pleasant environment. Uc Urinal Sleeve Bio - Refill Uc Urinal Sleeve Chemi - Refill Uc Urinal Sleeve Bio - Installation Kit Uc Urinal Sleeve Chemi - Installation Kit Uc Timed Urinal Control System The specially formulated dualpurpose block both controls odours and reduces bio-film build up. 14 Dart Valley systems t: f: e: sales@dartvalley.co.uk w:

17 Two Solutions The Urinal Sleeve offers two types of solution, BioUrinal and ChemiUrinal, each doing similar jobs but aimed at different environments. Teardrops ensure activation and distribution of cleaner deodoriser Head contains a powerful cleaner deodoriser block and is replaced periodically as part of the refill Urinal controls BioUrinal The BioUrinal can be very effective in low to medium use areas. Flushing should be limited to once every two hours to get the best performance from biological sleeves. The enzymes feed on the uric salts and require two hours to multiply to be fully effective. In busy toilets, such as airports, motorways services and busy factory toilets it may be found that to keep the bowl fresh a more frequent flush is required. Normally scale and bio-films with bad odours build up on the lining of the inlet trap. The biological treatment reduces this build-up. The biological cleaner deodoriser is fitted into the cone. The teardrops on the side of the cone allow urine to pass onto the block, thus activating the enzymes and transferring the enzymes via the sleeve to the trap where they feed and multiply. Only biological cleaners should be used with BioUrinal sleeves as conventional cleaners kill the enzymes. Tapered sleeve reduces air turbulence and associated reactions with urine, thus reducing odours Cleaner deodoriser reduces biofilm and bacteria on sleeve, reducing odours Conventional bottle trap seals flushpipe smells Teeth prevent blockages by stopping large objects from entering trap and flushpipe Replaceable sleeve removes biofilm build-up and associated odours Cleaner deodorisers help to keep traps and flushpipes clear of uric salt and limescale build-up Small outlet stops odours escaping into the washroom The BioUrinal sleeve is recommended when there is a requirement to save the maximum amount of water, and limited washing of the bowl is acceptable, where the use is low to medium. The BioUrinal sleeve should be replaced every 3 months. ChemiUrinal The ChemiUrinal sleeve achieves a very similar effect to the BioUrinal sleeve. The cleaner deodoriser is a well proven chemical formula designed to reduce uric salt and scale build up in the trap and flush pipes and also kills malodours. There are a number of advantages of the chemical cleaner deodoriser solution. The product is effective no matter how often the urinal bowl is flushed and is therefore beneficial in busy toilet areas including airports and motorway services as well as low to medium use toilets. The product can be utilised with existing flushing systems to help reduce smells and keep pipes clear. The ChemiUrinal sleeve can also be used in conjunction with conventional cleaners. Therefore if there is a risk of cleaners not always using biological cleaners the ChemiUrinal sleeve will resolve this issue. Replacement times will depend on frequency of flushing and levels of use. choosing BioUriNAL or chemiurinal sleeves The following guide gives an indication of Urinal Sleeve and water flush control selection. DVS are pleased to advise and assist with trials. Type of environment Low to medium use Heavy periods of use Continual heavy use Recommended type of controller PIR Set time Offi ce facilities Factories Motorway Services Airports Schools Ind BioUrinal ChemiUrinal Use the key to identify the ideal urinal sleeve for your application. Our Urinal Sleeves use a well proven chemical formula designed to reduce uric salt and scale build up in the trap and flush pipes and also kill malodours. Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 15

18 Urinal Controls Typical Installations Standard Setup for Urinal Flushing - Using cistern MULTIPLE BOWL SETUP - PEARL OR FLUSHMATIC SINGLE BOWL SETUP - URINAL CONTROL SYSTEM Low pressure setup (requires AC valves) Pearl or Flushmatic Urinal control system *Air break Water Isolation Valve* Filter/Y-Strainer* Solenoid valve Cistern Auto-syphon Water Isolation Valve* Filter/Y-Strainer* Float valve Cistern 15mm pipe 22mm pipe Solenoid valve (7.1mm 3W low pressure valve only) 15mm pipe Urinal sensor (Make sure pipes are clear of sensor) Urinal bowl IPS panel Pipework Urinal bowl DIRECT Urinal Flushing SETUP- Using MAINS WATER SINGLE BOWL SETUP - URINAL CONTROL SYSTEM Not all installations suit direct flushing. Please contact our team for guidance. MULTIPLE BOWL SETUP - URINAL CONTROL SYSTEM (2 Station kit) Not all installations suit direct flushing. Please contact our team for guidance. Urinal control system Urinal control system Water Isolation Valve* Filter/Y-Strainer* Solenoid valve Balancing Valve* 15mm pipe *Air break (1.6 metres min distance between urinal bowl outlet and air break) 22mm pipe Water Isolation Valve* 15mm pipe Solenoid valve Balancing Valve* 22mm pipe Urinal sensor (Make sure pipes are clear of sensor) IPS panel Pipework Urinal sensor (Make sure pipes are clear of sensor) IPS panel Pipework Urinal bowl Urinal bowl *Not supplied. Can be ordered separately from DVS. Typical installation diagrams are intended as a guide only. Appropriate regulations should be adhered to. Please note: Illustrations not to scale 16 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

19 Dimensions CONTROLLERS AND SENSORS Urinal Controls UC Pearl downlighter UC Pearl Solo downlighter UC Pearl Retro-Fit downlighter UC Flushmatic downlighter UC / UC Flushmatic - Grey (Mains / Battery) UC / UC Flushmatic - White (Mains / Battery) UC Channel Tap Control Box UC Urinal control system UC Timed Urinal Control System UC Infrared urinal sensor with 50mmø Bezel Cable length: 3m Fixing: 1/2 BSP Fixing for extension: 3/8 BSP (22mmø clearance drill hole) Please note: Illustrations not to scale Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 17

20 Urinal Controls Dimensions Accessories * 81 D030 = 140 D031 = 140 D032 = UC Air break (back flow preventer) Inlet: 15mm Inlet Outlet: 22mm Inlet UC = 1 BSP UC = 1 1/4 BSP UC = 1 1/2 BSP Auto-syphon AC Valve latcher Cable length: Approx 250mm UC Flushmatic/Pearl PSU - 6v Mains cable length: Approx 2m Low voltage cable length: Approx 1m UC Flushmatic battery pack - 6v UC Flushmatic battery pack for low indicator model - 9v AT Pearl battery pack - 6v Please note: Illustrations not to scale Classic Tap Urinal control system 18

21 URINAL CONTROLS Urinal Controls Urinal Control Kits Profile (Not to scale) Code Description UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC AC PP PP Flushmatic surface mount kit in Grey - Battery Flushmatic surface mount kit in White - Battery Flushmatic surface mount kit in S/Steel - Battery Flushmatic surface mount kit in Grey - Mains Flushmatic surface mount kit in White - Mains Flushmatic surface mount kit in S/Steel - Mains Replacement fuse for Flushmatic - TR5 (T)1.6A Flushmatic surface mount kit with battery low indicator in Grey - Battery Flushmatic surface mount kit with battery low indicator in White - Battery Flushmatic surface mount kit with battery low indicator in S/Steel - Battery Replacement fuse for Flushmatic - TR5 (T)1.6A Flushmatic downlighter kit for suspended ceilings in White - Battery Flushmatic downlighter kit with battery low indicator in White - Battery Flushmatic downlighter kit for suspended ceilings in White - Mains Replacement fuse for Flushmatic - TR5 (T)1.6A Pearl downlighter kit for suspended ceilings in White - Battery Pearl downlighter kit for suspended ceilings in White - Mains Pearl Solo downlighter kit for suspended ceilings in White - Mains Replacement fuse for Pearl - TR5 (T)1.25A Pearl Retro-fit downlighter kit for suspended ceilings in White - Battery Pearl Retro-fit downlighter kit for suspended ceilings in White - Mains Replacement fuse for Pearl - TR5 (T)1.25A! Notes: The Retro-fit canister is the same size as the Flushmatic downlighter so will fit into any existing Flushmatic holes in the event of an upgrade. Urinal control system - 1 station kit - Infrared sensor with 50mmø bezel Urinal control system - 2 station kit - Infrared sensors with 50mmø bezels Urinal control system for 1 or 2 urinals (control box only) Plastic valve (12v DC) with 3m cable and spade connectors Urinal control system fuse - Primary - 20mm Glass 240V (T)100mA Urinal control system fuse - Secondary - TR5 (F)500mA! Notes: Kits include control box, power supply, sensor, 50mmø bezel and solenoid valve with 3m cable and spade connectors. Standard infrared sensor bezel is brushed. Requires minimum pressure of 0.5 BAR. Must be used with 3W 12V DC NC solenoids. UC UC UC AC AC AC Infrared urinal sensor (price excludes bezel) - c/w 3m cable 50mmø chrome bezel for urinal control system sensor 50mmø stainless steel bezel for urinal control system sensor (standard) Sensor thread extension for 100mm wall thickness Sensor thread extension for 150mm wall thickness Sensor thread extension for 250mm wall thickness Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 19

22 Urinal Controls URINAL CONTROLS Battery Operated Individual Controller (uses 6v latching valves) Profile (Not to scale) Code Description UC AC AC Channel Urinal Control Box 6v DC ASCO Solenoid valve 12.7mm orifice BAR - 15mm 6v DC ASCO Solenoid valve 6.7mm orifice BAR - 15mm! Notes: Sensors as shown on previous page Urinal Sleeves and Cleaners Profile (Not to scale) Code Description UC UC UC UC UC UC UC UC BioUrinal Sleeve installation kit - Biological - 1 1/4" BSP BioUrinal Sleeve installation kit - Biological - 1 1/2" BSP BioUrinal Sleeve refill - Biological ChemiUrinal Sleeve installation kit - Chemical - 1 1/4" BSP ChemiUrinal Sleeve installation kit - Chemical - 1 1/2" BSP ChemiUrinal Sleeve refill - Chemical Timed urinal control system (Includes solenoid valve) - Battery Timed urinal control system (Includes solenoid valve) - Mains! Notes: Only biological cleaners should be used with BioUrinal sleeves as conventional cleaners kill the enzymes. Accessories Profile (Not to scale) Code Description UC AT UC Battery pack for Flushmatic urinal controls (with tails) - 6v Battery pack for Pearl and overseas Flushmatic urinal controls (without tails) - 6v Power supply for Pearl and Flushmatic urinal controls - 6v UC Flushmatic printed circuit board AC UC Valve latcher! Notes: Enables manual operation of solenoid valve without requiring urinal control. Useful for testing or commissioning purposes. Air break (back flow preventer) 15mm/22mm - Prevents backflow to water supply UC UC UC Auto-Syphon for urinal cisterns - 5 1/2" x 1" BSP Auto-Syphon for urinal cisterns - 5 1/2" x 1 1/4" BSP Auto-Syphon for urinal cisterns - 8" x 1 1/2" BSP 20 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

23 Flushmatic downlighter Urinal Controls 21

24 No-Touch Taps No-ToUcH TAps Combining the benefits of no-touch technology with water savings and robust reliable performance, no-touch automatic taps are an ideal choice for washrooms across a wide variety of applications, offering benefits to commercial and public sector environments. D670/piLLAr/sV Aquarius Pillar SV - Chrome No-touch Taps offer an average 65% water saving... Up to 65% savings on water costs... MANUFACTURED 22 IN THE UK

25 No-touch automatic taps and accessories from Dart Valley Systems incorporate state-of-the-art design and technology and offer hygienic water dispensing solutions to all market sectors - including hotels, supermarkets, laboratories, hospitals, schools, universities, airports, motorway services and food factories. No-Touch Taps Our extensive product range is suitable for use by the elderly or disabled and the superior heavy duty construction offers resistance to vandalism and misuse. Easy to install, with options for mains or battery operation, DVS no-touch products allow you to control water efficiently, conserve energy and reduce costs without sacrificing performance and reliability. WHAT Are THe BeNeFiTs of AUToMATic TAps? Fully Programmable Adjustable Run-On time Adjustable Range and Trigger level Adjustable Anti-Vandal Lockout Time Automatic Purge Adjustable Purge Run Times Commissioning Flush Hygiene No-touch taps are the most hygienic option available for hand washing. This is a very important aspect for everybody, but of increased importance where people are handling food, or where cross contamination needs to be avoided. Reliability DVS no-touch taps have been extensively developed and tested to achieve the current high levels of reliability. James Paget Hospital said We fi rst started trialling Dart Valley Systems automatic taps over two years ago they have been totally reliable and are good value for money. Whilst the main consideration is hygiene to avoid cross contamination, automatic taps also make significant savings on water. Water Savings Electronic taps use the optimum amount of water. DVS normally fit a 5 litre flow reducing aerator (ECA approved) on the spout to control the flow of water and the taps only run when the hands are placed under the spout, limiting the water use to the precise time required and preventing taps being left running. Features Include: Programmable handset see pg 25 Hygienic - Helps avoid cross infection Easy to use - Ideal for disabled or elderly Battery or mains powered Easy to install & maintain Connection options PEX, copper, stainless steel HoW THeY WorK intelligent electronics All DVS no-touch taps include highly intelligent electronics, giving ultimate flexibility over sensor ranges and run times. Taps can be pre-set prior to delivery or adjusted on-site using a hand held controller. All taps feature a chlorination option for new installations or where flushing is required and a built in purge facility, ideal for areas where water condition is critical. A number of helpful reporting features can also be accessed via the hand held controller, including the number of tap operations and purges which have occurred. infra red detection All electronics are housed within the body of the tap. A separate solenoid valve controls the flow of water and is connected to the tap using secure IP65 rated connection cables. The power supply or battery pack are also connected in the same way. When a user puts their hands under the tap the infra red detector activates the solenoid valve, causing it to open. The valve remains open while the user s hands are under the tap allowing them to wash their hands thoroughly. Once the user removes their hands the sensor activates the solenoid valve to close and the water flow is stopped. All DVS taps have an anti-vandal mode ensuring that if someone deliberately blocks the sensor, the tap will only run for one minute. The sensor will then lock off until the sensor has been cleared and the tap then resets, preventing water wastage and the risk of overflow. AT Classic Tap Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 23

26 No-Touch Taps DVS no-touch taps have been extensively developed and tested to achieve high levels of reliability and consistent performance, combined with attractive design options. No-ToUcH TAps Classic AT Classic - Chrome Simple and robust, this traditionally designed tap is manufactured from chrome plated heavy brass. AT Aquarius Pillar - Chrome AT Aquarius Pillar SV - Chrome Aquarius Pillar and Pillar SV Incorporating a modern long-reach design, the Aquarius Pillar is a robust and high quality tap that is perfect for raised sinks or glass bowls, as well as providing superior hygiene control. Classic Swan AT Classic Swan - Chrome The elegant Classic Swan no-touch tap is manufactured from chrome plated heavy brass.! please Note: The operation of the Classic tap can be effected by reflective jackets, in which case, if these are used, one of the Aquarius range of taps may be more suitable. If in doubt please discuss with one of our technical staff. The Pillar SV tap is a shorter version of the Aquarius Pillar. Its shorter body makes it ideal for recessed sinks whilst still retaining the main attractions of the original Aquarius Pillar. Available in polished chrome finish. Aquarius High Neck With its extra high body and long reach design the Aquarius High Neck is perfect for raised sinks or glass bowls. Its simple but unique design also makes it exceptionally easy to clean. Aquarius WM Straight AT WM Straight - Brushed With its modern and simple design, the Aquarius wall mount tap ensures the ultimate in hygiene for the most discerning of clients. The Aquarius wall mount tap is manufactured from stainless steel, with a solid 38mm stainless steel ingot for the head assembly. This tap is available in three standard lengths; 150mm, 200mm and 250mm. Available in brushed or polished finish. The Aquarius High Neck is manufactured from stainless steel, with a solid 38mm stainless steel ingot for the head assembly. Available in brushed or polished finish. Aquarius High Neck SV This tap is a shorter version of the Aquarius High Neck tap. Its shorter body makes it ideal for recessed sinks whilst still retaining the main attractions of the original Aquarius High Neck. Available in brushed or polished finish. AT High Neck - Brushed AT High Neck SV - Brushed 24 Dart Valley systems t: f: e: sales@dartvalley.co.uk w:

27 No-Touch Taps AT A45 DOC.M - Brushed AT A32 Brushed Aquarius A32 and A45 Incorporating a modern and simple design, the A32 and A45 taps ensure the ultimate in hygiene. Perfect for all applications where hygiene is paramount, the robust design and build quality also makes them ideal for heavy industrial applications. The A32 and A45 are manufactured from stainless steel, with a solid 38mm stainless steel ingot for the head assembly. Available in brushed or polished finish. Tap Programmer AT A45 Brushed The hand held tap programmer is capable of adjusting the run, range and purge times on all DVS automatic taps. It can also be set to read the tap, and determine the amount of purge and tap operations. Aquarius A45 DOC.M This tap has been designed to suit DOC.M and disabled sinks and is also ideal for most extra small basins. Available in brushed or polished finish. Consumption (per handwash) Two Twist Taps Push Taps Automatic Taps 2 litres 1.2 litres 0.8 litres Consumption (per day) 200 litres 120 litres 80 litres Consumption (per year) 50 m³ 30 m³ 20 m³ Water Saving (per day) - 80 litres 120 litres Water Saving (per year) - 20 m³ 30 m³ Typical Saving with Automatic Taps = 30 m³ (per year) Major clients include: AT Hand Held Control for Programable Tap End Board NHS Estates Tate Modern Roadchef BAA Airports Marks & Spencers Tesco NeW AQUAriTHerM TM Designed with healthcare environments in mind, the AquariTherm TM meets the needs of challenging infection control environments alongside those of FM teams. Features include: No-touch or manual operation models available Ergonomic, easy to clean surfaces Quick and easy to service No hot surface area Simple filter exchange and cleaning Adjustable sensing range Automatic purge facility AT No-touch AquariTherm MT Manual AquariTherm AT No-touch AquariTherm with Twyford Bushboard Module Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 25

28 No-Touch Taps DVS have developed a number of controllers below to give tap spouts electronic, no-touch and tactile control, purge control and battery backup. control systems Ac Ac Anti-Vandal Sensors AT Tap Control System AT Automatic tap purge controller Tap Control System The tap control system can be used to control mixed water for 1 or 2 taps, or to control both hot and cold on a single tap using 2 sensors. The control system can be used with wave-on or tactile sensors. The tap control system also features built-in purge control option to avoid stagnation. Purge Controller The automatic tap purge controller reduces the risk of Legionella by purging the taps if they have not been operated for a predefined time. Purge run times are adjustable and can be set between 5 seconds and 5 minutes. A periodic purge can be switched on or off. When a user waves their hand past the sensor (or pushes the tactile switch) the control system activates the solenoid valve, the valve will then run for a pre-set time before automatically closing the valve and stopping the tap. Various settings can be customised quickly and easily from within the control box if necessary. Features include: Saves water, switches off after pre-set time No-touch - Helps avoid cross infection High performance & reliability Adjustable run-time Settings allow option to wave-off AT Automatic tap battery backup unit Battery Backup Unit AT B Lead - Automatic tap battery pack The automatic tap battery backup unit will automatically switch from mains supply to battery in the event of a power failure (comes complete with AT battery pack). When mains power is restored the unit will switch back to mains supply. TAp spouts Tap Spouts (No Electronics) Using DVS tap spouts with a separate control source, including the Tap Control System (above) provides a range of tap spout solutions for a wide variety of applications. Discuss your application with DVS technical sales team to ensure you obtain the optimum controls solution. Various settings can be customised quickly and easily from within the control box such as run-times and tap purges. AT High security tap spout AT High security tap spout AT Aquarius WM spout 150mm Features include: Stainless steel High security options available Can be used with or without electronic controls AT Wall mounted fixed spout AT High security deck mounted spout AT High security basin mounted tap nossle 26 Dart Valley systems t: f: e: sales@dartvalley.co.uk w:

29 B B B B B Dimensions standard setup AUTOMATIC TAPS standard setup TAP CONTROL SYSTEM No-Touch Taps Sensor Battery or PSU Automatic tap Sink area Tap spout (no electronics) Fixings & washers Mixed water supply Hot AT Control system Fixings & washers Sink area Mixed water supply Hot Battery or PSU connector Pex hose Solenoid valve Filter/Y-Strainer* Water Isolation Valve* TMV3 Mixing valve** Cold Pex hose Solenoid valve Filter/Y-Strainer* Water Isolation Valve* TMV3 Mixing valve** Cold MULTipLe installations - AUTOMATIC TAPS Automatic tap Fused Spur Splitter lead Fixings & washers TMV3 Mixing valve** Hot Cold 240V PSU PSU connector AT 'T' Connector Pex hose Solenoid valve Filter/Y-Strainer* Water Isolation Valve* AT 'T' Connector AT Extension cable* (Optional if cable doesn't reach) Mixed water supply *Not supplied. Can be ordered separately from DVS. **Not supplied. Required for warm water output and to comply with new building regulations. Can be ordered separately from DVS. Typical installation diagrams are intended as a guide only. Appropriate regulations should be adhered to.! pressure Notes: All automatic taps come with a 12.7mm solenoid valve as standard which requires 0.5 BAR to operate. Lower pressure valves can be provided if necessary, please specify on order or contact DVS for advice. Please note: Illustrations not to scale Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 27

30 No-Touch Taps Dimensions NO-TOUCH TAPS and tap spouts Aquarius WM Straight tap Fixing: 3/4 BSP (28mmø clearance drill hole) AT Aquarius A32 tap Fixing: 3/4 BSP (28mmø clearance drill hole) AT Aquarius A45 tap Fixing: 3/4 BSP 28mmø clearance drill hole) AT Aquarius A45 DOC.M tap Fixing: 3/4 BSP (28mmø clearance drill hole) AT Aquarius Pillar tap AT Aquarius Pillar SV tap AT Aquarius High Neck tap AT Aquarius High Neck SV tap Fixing: 3/4 BSP (28mmø clearance drill hole) Fixing: 3/4 BSP (28mmø clearance drill hole) Fixing: 3/4 BSP (28mmø clearance drill hole) Fixing: 3/4 BSP (28mmø clearance drill hole) /2 BSP 21 AT Classic tap Fixing: 3/4 BSP (28mmø clearance drill hole) AT Classic swan tap Fixing: 3/4 BSP (28mmø clearance drill hole) AT High security deck mounted spout AT and AT High security stainless steel tap nossles. Basin mounted (left) or stainless steel mounted (right). AT Fixing: 1/2 BSP AT Fixing: 3/8 BSP Extension fixing: 1/2 BSP! Notes: Please see price guide for tap kit codes. For more information regarding anti-rotation pins, please contact our sales team. Please note: Illustrations not to scale 28 Dart Valley Systems t: f: e: w:

31 Dimensions No-Touch Taps AT Aquarius WM tap spout Fixing: 3/4 BSP (28mmø clearance drill hole) AT High security WM tap spout - Stainless Steel Fixing: 1/2 BSP (22mmø clearance drill hole) AT High security WM bath spout - Stainless Steel Fixing: 3/4 BSP (28mmø clearance drill hole) AT Wall mounted fixed spout - Chrome Fixing: 3/4 BSP (28mmø clearance drill hole) CONTROL SYSTEMS AND SENSORS AT Tap control system - Mains AT Purge controller AT (Top) 40 AT (Bottom) 2 Channel tap control box - Battery AT Battery backup unit AC BLUE AC RED Anti-vandal wave-on sensor with 50mmø bezel Cable length: 3m Fixing: 1/2 BSP Fixing for extension: 3/8 BSP (22mmø clearance drill hole) AC BLUE AC RED Tactile switch with 50mmø bezel Cable length: 3m Fixing: 1/2 BSP Fixing for extension: 3/8 BSP (22mmø clearance drill hole) AC Sensor Only Wave-on sensors 50mmø bezels Cable length: 3m Fixing: 3/8 BSP (17mmø clearance drill hole) Please note: Illustrations not to scale Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 29

32 * No-Touch Taps Dimensions Accessories AT Touch free tap self-adhesive polythene label (included in all automatic tap kits). AT Automatic tap single PSU - 6v Mains cable length: 1m Low voltage cable length: 1.5m AT Replacement battery for B lead - 6v AT B lead with battery and box - 6v AT B lead with double battery and box - 6v AT T Connector 500* 500* 375 AT A lead - Y splitter AT Pex hose (*standard length) AT Pex hose Extension leads (*lengths range from 1M to 3M) Please note: Illustrations not to scale 30 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

33 NO-TOUCH TAPS No-Touch Taps Automatic Taps (Spouts only) Profile (Not to scale) Code Description AT AT AT PP AT AT AT PP Classic tap spout only in chrome pex tails Classic tap spout only in chrome copper tails Classic tap spout only in chrome stainless tails M6 x 12 S/steel Grub Screws Anti Rotation for D/M Tap bases! Notes: Deck mounted. Standard finish is chrome. Classic Swan tap spout only in chrome pex tails Classic Swan tap spout only in chrome copper tails Classic Swan tap spout only in chrome stainless tails M6 x 12 S/steel Grub Screws Anti Rotation for D/M Tap bases! Notes: Deck mounted. Standard finish is chrome. AT AT AT PP AT AT AT PP AT AT AT PP Aquarius DM A32 tap spout only in S/St pex tails Aquarius DM A32 tap spout only in S/St copper tails Aquarius DM A32 tap spout only in polish S/St M6 x 12 S/steel Grub Screws Anti Rotation for D/M Tap bases! Notes: Deck mounted. Standard finish is brushed stainless steel. Polished chrome finish also available. Aquarius DM A45 tap spout only in S/St pex tails Aquarius DM A45 tap spout only in S/St copper tails Aquarius DM A45 tap spout only in polish S/St M6 x 12 S/steel Grub Screws Anti Rotation for D/M Tap bases! Notes: Deck mounted. Standard finish is brushed stainless steel. Polished chrome finish also available. Aquarius DM A45 Doc M tap spout only in S/St pex tails Aquarius DM A45 Doc M tap spout only in S/St copper tails Aquarius DM A45 Doc M tap spout only in polish S/StSpare anti-rotation pins M6 x 12 S/steel Grub Screws Anti Rotation for D/M Tap bases! Notes: Deck mounted. Standard finish is brushed stainless steel. Polished chrome finish also available. Tap Kits (Required for the above taps) Code AT AT AT AT AT AT AT AT Description Single station battery kit standard pressure Single station mains kit standard pressure Two station mains kit standard pressure Three station mains kit standard pressure Single station battery kit low pressure Single station mains kit low pressure Two station mains kit low pressure Three station mains kit low pressure! Notes: Tap kits include battery pack or mains PSU, solenoid valves and associated connecting leads. Standard pressure suitable for 1-6 bar. Low pressure suitable for 0-1 bar. AT A45 Brushed No-Touch Taps with Twyford Basins Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 31

34 No-Touch Taps NO-TOUCH TAPS Finishes Taps with brushed stainless steel finish are all also available in polished chrome finish. Automatic Taps Profile (Not to scale) Code Description AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT Aquarius WM straight tap spout only in S/St 150mm pex tails Aquarius WM straight tap spout only in S/St 150mm copper tails Aquarius WM straight tap spout only in S/St 150mm stainless tails Aquarius WM straight tap spout only in S/St 150mm filter pex tails Aquarius WM straight tap spout only in polish S/St 150mm pex tails Aquarius WM straight tap spout only in S/St 200mm pex tails Aquarius WM straight tap spout only in S/St 200mm copper tails Aquarius WM straight tap spout only in S/St 200mm stainless tails Aquarius WM straight tap spout only in S/St 200mm filter pex tails Aquarius WM straight tap spout only in polish S/St 200mm pex tails Aquarius WM straight tap spout only in S/St 250mm pex tails Aquarius WM straight tap spout only in S/St 250mm copper tails Aquarius WM straight tap spout only in S/St 250mm stainless tails Aquarius WM straight tap spout only in S/St 250mm filter pex tails Aquarius WM straight tap spout only in polish S/St 250mm pex tails AT AT03-043! Notes: Standard finish is brushed stainless steel. Polished chrome finish also available. Aquarius DM high neck tap spout only in S/St pex tails Aquarius DM high neck tap spout only in polish S/St pex tails! Notes: Deck mounted. Standard finish is brushed stainless steel. Polished chrome finish also available. AT AT AT Aquarius DM Short neck tap spout only in S/St pex tails Aquarius DM Short neck tap spout only in S/St copper tails Aquarius DM Short neck tap spout only in polish S/St pex tails! Notes: Deck mounted. Standard finish is brushed stainless steel. Polished chrome finish also available. AT Aquarius DM Tall Pillar tap in Chrome spout only pex tails! Notes: Deck mounted. Standard finish is chrome. AT Aquarius DM Short Pillar tap in Chrome spout only pex tails! Notes: Deck mounted. Standard finish is chrome. Tap Kits (Required for the above taps) Code AT AT AT AT Description Single station battery kit standard pressure Single station mains kit standard pressure Two station mains kit standard pressure Three station mains kit standard pressure Code AT AT AT AT Description Single station battery kit low pressure Single station mains kit low pressure Two station mains kit low pressure Three station mains kit low pressure! Notes: Tap kits include battery pack or mains PSU, solenoid valves and associated connecting leads. Standard pressure suitable for 1-6 bar. Low pressure suitable for 0-1 bar. 32 Dart Valley Systems t: f: e: w:

35 NO-TOUCH TAPS No-Touch Taps Control Systems Profile (Not to scale) Code Description AT AT AT AT AT AT AT AC PP PP Tap control system - 1 station kit - Wave-on sensor with 50mmø bezel Tap control system - 2 station kit - Wave-on sensors with 50mmø bezels Tap control system - 1 station kit - Tactile switch with 50mmø bezel Tap control system - 2 station kit - Tactile switches with 50mmø bezels Tap control system - Wave-on sensor kit for VR high security backplate Tap control system - Tactile switch kit for VR high security backplate Tap control system for 1 or 2 taps (control box only) Plastic valve (12v DC) with 3m cable and spade connectors Tap control system fuse - Primary - 20mm Glass 240V (T)100mA Tap control system fuse - Secondary - TR5 (F)500mA! Notes: Kits include control box, power supply, sensor, 50mmø bezel and solenoid valve with 3m cable and spade connectors. Standard wave-on sensor bezel is chrome. Standard tactile switch bezel is stainless steel. Requires minimum pressure of 0.5 BAR. Must be used with 3W 12V DC NC solenoids. A B C AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC (A) (B) (B) (C) (C) Wave-on sensor (price excludes bezel) c/w 3m cable Optional Red (Hot) indication washer for behind D102 wave-on sensor bezel Optional Blue (Cold) indication washer for behind D102 wave-on sensor bezel 50mmø chrome bezel for D102 wave-on sensor 50mmø stainless steel bezel for D102 wave-on sensor Anti-vandal wave-on sensor with Red (Hot) indication and 50mmø s/st bezel c/w 3m cable Anti-vandal wave-on sensor with Blue (Cold) indication and 50mmø s/st bezel c/w 3m cable Tactile switch with Red (Hot) indication and 50mmø s/st bezel c/w 3m cable Tactile switch with Blue (Cold) indication and 50mmø s/st bezel c/w 3m cable Wave-on sensor (price excludes bezel) - c/w 15m cable 38mm Chrome wave on sensor pack c/w 15m cable Anti-vandal wave-on sensor with Blue (Cold) indication and 50mmø s/st bezel c/w 15m cable Anti-vandal wave-on sensor with Red (Hot) indication and 50mmø s/st bezel c/w 15m cable Tactile switch with Blue (Cold) indication and 50mmø s/st bezel c/w 15m cable Tactile switch with Red (Hot) indication and 50mmø s/st bezel c/w 15m cable Sensor thread extension for 150mm wall thickness Sensor thread extension for 250mm wall thickness AT Battery backup unit! Notes: Comes complete with B lead automatic tap battery pack with box and lead Battery Operated Tap Controller (uses 6v latching valves) Profile (Not to scale) Code Description AT AT AC AC AC Channel tap control box only- c/w 6 x AA Batteries 2 Channel tap control box - c/w 6 x C Cell Batteries 6v DC ASCO valve (H262604BW) 4mm orifice BAR - 15mm 6v DC ASCO Solenoid valve 12.7mm orifice BAR - 15mm 6v DC ASCO Solenoid valve 6.7mm orifice BAR - 15mm! Notes: Operates with any of the sensors as shown on previous page Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 33

36 No-Touch Taps NO-TOUCH TAPS ECA approval Please see the Water Technology List for ECA approved products. Tap Spouts Profile (Not to scale) Code Description AT AT High security deck mounted spout - Brushed High security deck mounted spout - Polished AT AT Basin mounted high security stainless steel tap nossle (left) - Fixing: 1/2 BSP Stainless steel mounted high security stainless steel tap nossle (right) - Fixing: 3/8 BSP AT Aquarius WM tap spout with no electronics (150mm)! Notes: Wall mounted. Standard finish is brushed stainless steel. AT AT AT High Security WM tap spout - 30 (98mm long from top) High Security WM tap spout - All Steel - 30 (80mm long from top) High Security WM tap spout - 45 (113mm long from top)! Notes: Wall mounted. No Electronics. Substantially reduced ligature risk. Standard finish is brushed stainless steel. AT Wall mounted fixed spout (minimalistic)! Notes: Wall mounted. No electronics. Accessories Profile (Not to scale) Code Description AT Touch free self-adhesive polythene label! Notes: Durable, wipe clean surface. High tack. Included in all automatic tap kits. A C AT AT AT AT AT AT (A) (A) (A) (E) (C) (C) Flow straightener 6LPM Standard flow straightener 5LPM Flow straightener 3LPM - Blue/green back Flow straightener - Unrestricted - Standard plastic Spray 4LPM - Pink back Spray 3LPM - Purple back! Notes: All tap outlets above have M24x1 threads. E AT Single Earthed PSU for Automatic Taps AT AT AT B lead - Automatic tap battery pack with box and lead B lead - Automatic tap double battery pack with box and lead for extended life Replacement single battery for B lead AT A lead - Y splitter lead! Notes: Connects unit to solenoid valve and power source. AT C lead - Patch lead - 'T' piece connecting kit for tap stations! Notes: For linking power between units. 34 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

37 Dart Valley Systems NO-TOUCH TAPS No-Touch Taps Accessories (continued) Profile (Not to scale) Code Description AT AT AT AT AT AT AT AT PP Pex hose - Standard length 500mm (Suitable for DVS No-Touch Taps) Pex hose - Long length 1m (Suitable for DVS No-Touch Taps) Pex hose - 15mm x 15mm extension hose Conversion kit for flexibles to copper tails - wall mounted only. c/w 350mm length. Exposed length of copper tail will vary according to tap model Conversion kit for flexibles to stainless steel tails - wall mounted only. c/w 350mm length. Exposed length of tail will vary according to tap model Cable extension (1 metre) Cable extension (2 metre) Cable extension (3 metre) Anti-rotation locking washers for taps Notes: When tightened, these washers lock to the under side of the worktop to prevent twisting of the tap. AT Chrome blanking plate (plastic) AT Hand Held Control for Programable Tap End Board (for Aquarius tap range only) AT Aquarius A45 No-Touch Tap 35

38 push Taps push TAps A popular product for high traffic washrooms, push taps offer great value for money combined with robust performance. The high quality DVS push tap also offers high levels of water savings, ensuring a short payback period. Push taps offer an average 50% water saving... 36

39 Push taps offer a good level of hygiene and water saving features, provide designs that are tamper-proof and vandal resistant and are easy to install and maintain. push Taps DVS offer a variety of self-closing, manually operated taps that are ideal for all industrial and public washroom applications. The range covers many requirements, offering taps for hand, elbow or knee operation. Features include: Up to 50% savings on water costs Easy to use Adjustable flow rates No-touch self-closing operation Easy to install and maintain High pressure and low pressure taps available Various options for either hand, elbow or knee operation In-built filter Reliable and good value Hand Operated MT Push tap MT WM Push tap Elbow Operated MT Low pressure push tap MT WM Extended push tap HoW THeY WorK The average screw head tap will deliver approx 12 ltrs per minute when turned partially on. On average a screw head tap is left on for 15 seconds. Assuming each person on average washes their hands 4 times per day, this equates to 12 ltrs per day. On average the selfclosing taps will reduce this to 6 ltrs per day. With a DVS selectable flow rate push tap installed, the flow rate can be adjusted to run from 4 ltrs per minute and the time on can be reduced to between 3 and 11 seconds. The biggest benefit however is that the push tap cannot be left running, as it self closes. This is particularly important in public toilets. AssUMpTioN For WATer saving projection 400 personnel on site washing their hands 4 times per day would be using 4,800 ltrs of water per day. Depending on the flow rate and run time set, push taps could reduce this to 2,400 ltrs of water per day. Saving 2,400 ltrs per day x 260 working days = 624,000 ltrs of water per annum. This would also result in a substantial reduction in energy costs as less hot water would be used. MT Lever operated clinic tap Two Twist Taps Push Taps Consumption (per handwash) 2 litres 1.2 litres Consumption (per day) 200 litres 120 litres Consumption (per year) 50 m³ 30 m³ Water Saving (per day) - 80 litres Water Saving (per year) - 20 m³ Typical Saving with Push Taps = 20 m³ (per year) The DVS range of selectable flow rate push taps have many advantages over and above the normal push tap. Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 37

40 push Taps Dimensions Accessories G1/ MT Push tap MT Low pressure push tap MT Lever clinic tap MT WM Push tap Fixing: 1/2 BSP (22mmø clearance drill hole) Fixing: 1/2 BSP (22mmø clearance drill hole) Fixing: 1/2 BSP (22mmø clearance drill hole) Fixing: 1/2 BSP (22mmø clearance drill hole) MT WM Extended push tap Fixing: 1/2 BSP (22mmø clearance drill hole) Major clients include: Sainsbury s St Andrews Health Care Tesco HMP Dartmoor Perth & Kinross Council HMP Stoke Heath Please note: Illustrations not to scale Please note: Illustrations not to scale 38

41 push TAps Replacement Cartridges See push tap accessories below for replacement cartridges. Fixing Nuts and Washers High quality brass fixing nuts. push Taps Push Taps Profi le (Not to scale) Code Description MT MT MT Push tap - Hot Push tap - Cold! Notes: Deck mounted. Hand operated. Chrome finish. Low pressure push tap! Notes: Deck mounted. Hand operated. Chrome finish. MT Lever clinic tap - Angled! Notes: Deck mounted. Elbow operated. Chrome finish. MT MT MT MT Ac Ac Ac WM push tap - Hot WM push tap - Cold! Notes: Wall mounted. Chrome finish. Hand operated. Standard tap needs to be fitted to a 1/2" BSP female connection. Extended WM push tap - Hot Extended WM push tap - Cold! Notes: Wall mounted. Chrome finish. Hand operated. Standard tap needs to be fitted to a 1/2" BSP female connection. Thread extension for WM push taps - 100mm wall thickness Thread extension for WM push taps - 150mm wall thickness Thread extension for WM push taps - 250mm wall thickness! Notes: Makes tap connection 3/4" BSP Accessories Profi le (Not to scale) Code Description MT MT Replacement cartridge for push taps Replacement cartridge for lever clinic taps pp pp pp Anti-rotation locking washers for taps! Notes: When tightened, these washers lock to the under side of the worktop to prevent twisting of the tap. Flanged cast brass nut - 1/2" BSP Flanged cast brass nut - 3/4" BSP AT Chrome blanking plate (plastic) Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 39

42 showers & Bath Filling showers & BATH FiLLiNG A wide range of sensors, control systems, shower heads and showers combine to create water efficient showering for a wide range of environments, from anti-ligature products to robust showers designed for heavy traffic areas. DVS Showers offer an average 50% water saving... MANUFACTURED 40 IN THE UK

43 DVS offer complete shower units ready to fix onto the wall. Constructed from robust 316 stainless steel, DVS shower towers offer a safe but attractive, high security and easy to install solution. showers & Bath Filling DVS shower towers have a choice of either wave-on, tactile or push operation and are self-closing offering energy efficiencies and water savings. Standard Shower Towers Ceiling Height Towers DVS shower towers are also available in two other categories; with in-built TMV3 or ceiling height. The ceiling height shower towers are extended, wider versions of the standard towers and are designed to hide all pipework to the ceiling. The TMV3 towers look the same as the ceiling height towers but incorporate a TMV3 mixing valve. The in-built TMV3 valve can be set to optimum shower water temperature which is normally 41ºC and will prevent scalding in the event of cold water failure. Wave-on operated standard tower with high security shower head DVS Shower towers are pre-plumbed to help make installation as easy as possible sh High security WM showerhead Features include: Designed for high-security applications Robust 1.5mm stainless steel construction High impact resistance Tamper proof Wave-on, push, or tactile operation Easy to install Up to 50% savings on water Available as Standard, with built-in TMV3 or Ceiling Height Sensor Options sh Ceiling height shower tower Wave-on sensors or tactile switches are available for controlling showers, either as part of the DVS shower control system or incorporated into the shower towers. HoW THeY WorK To make installation as simple as possible the towers are pre-plumbed and valves are safely housed within the tower. Controls are supplied with pre-set settings but can be customised quickly and easily from within the control box if necessary. sh Wave-on shower sensor with 50mmø bezel Ac Tactile hot switch with 50mmø s/steel bezel Ac Tactile cold switch with 50mmø s/steel bezel With electronic wave-on and tactile controlled towers a pre-set runtime is set so that the showers can not be left running for any longer than the pre-set time. The push operated showers operate in a very similar way to a push tap and will self-close after a period of approximately 40 seconds. Major clients include: NHS Estates Education HMP Estates Local Authorities Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 41

44 showers & Bath Filling DVS offer various high and low security solutions that are robust, attractive and easy to install. Our control systems have been specially developed to be as customisable and reliable as possible, whilst being easy to install and maintain. showerheads & ADjUsTers sh High security showerhead sh Ceiling mounted high security showerhead sh Standard aqua chrome showerhead MT WM Concealed push tap for showers MT WM Shower push tap with top inlet MT WM Shower push tap with back inlet Individual Showerheads Showerheads are available to purchase separately as well as being options for the shower towers. The showerheads can be used in conjunction with the DVS Shower Control System. The SH and SH are intended for installations where everything except the showerhead and sensor are concealed behind a wall or panel. Features include: (applies to high security models) Stainless steel Easy to install Tamper proof Ideal for prisons Features include: (applies to SH07-018) Swivel 1/2 BSP connection Water efficient Simple retro-fit connection Push Taps for Showers DVS offer a variety of self-closing, manually operated push taps for use in showers. Push taps offer a good level of hygiene and water saving features, provide designs that are tamper-proof and vandal resistant and are easy to install and maintain. Features include: Up to 50% savings on water costs Adjustable flow rates No-touch self-closing operation In-built filter TeMperATUre BLeNDiNG VALVe ADjUsTer In many public areas supplying water at 41ºC is ideal. If however the requirement is to provide 41ºC with user adjustment between this temperature and cold (determined by the cold input temperature) then the temperature blending valve adjuster can be added to accommodate this facility. Features include: Robust construction Tamper proof Easy to install Available for different wall sizes The blender adjuster is designed to be robust with good aesthetics and therefore suits all applications. There are three standard fixings available to suit various wall thicknesses ranging from 1.5mm to 280mm. Special sizes can be provided where required. sh Temperature blending valve adjuster! please Note: It is strongly recommended that a thermostatic mixing valve is fitted prior to the blending valve so that hot water temperature can be safely controlled. 42 Dart Valley systems t: f: e: sales@dartvalley.co.uk w:

45 control systems showers & Bath Filling sh Shower control system Wave-on or Tactile sensors available with this control system sh High security showerhead sh Bath filling sensor plate sh Bath filling top-up sensor plate sh Shower tactile sensor plate Shower Control System The shower control system can be used for 1 or 2 showerheads. The control system will effectively give any standard showerhead automatic wave-on control. The shower control system also features a built-in purge control option to avoid stagnation. Bath Filling The bath filling control system (SH07-020) can be used with wave-on or tactile switches. The half fill level is half that of the full fill which is adjustable. There are a number of kits available to suit a wide range of requirements. When a user waves their hand past the sensor (or pushes the tactile switch) the control system activates the solenoid valve and will run for a pre-set time before automatically closing the valve and stopping the shower. Various settings can be customised quickly and easily from within the control box if necessary. Features include: Saves water, switches off after pre-set time No-touch operation Hygienic - Helps avoid cross infection Easy to use - Ideal for disabled or elderly High performance & reliability Easy to install & maintain Can individually control 1 or 2 taps Adjustable run-time Settings allow option to wave-off Built-in purge control option to avoid stagnation sh Bath control system sh High security bath spout Benefits of the bath filling control system are similar to the shower control system except that it operates a single valve post thermostatic mixer, with the option of hot and cold if required. An additional control system can be installed if warm and cold top up is required as well as the full fill and half fill settings. Various sensor plates, water spouts and thermostatic mixing valves are available. To choose the most suitable solution please request full specification sheets from our sales team. Bath Filling Vr High security bath filling backplate Vr High Security bath filling backplate Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 43

46 H C Showers & Bath Filling Typical Installations Standard Setup - Shower Towers standard Setup - Blending Valve Adjuster Hot water Cold water TMV3 for standard shower tower* Solenoid valve Showerhead Mixed water Control system Built in TMV3 in ceiling height shower tower Shower sensor Mixed water Cold SH Standard shower tower Blending valve Adjuster SH Ceiling height shower tower Hot Mixed water TMV mixing valve* Standard Setup - Shower Control System Standard Setup - Bath Control System Solenoid valve Control system Showerhead 3 Amp fused spur Control system Sensors Bath filling backplate Spouts Mixed water Shower sensor Cold Bath Cold Hot Solenoid valve Hot TMV* Set at recommended 41ºc (Max 44ºc) TMV mixing valve* Please note: Illustrations not to scale *Not supplied. Required for warm water output and to comply with building regulations. Can be ordered separately from DVS. Typical installation diagrams are intended as a guide only. Appropriate regulations should be adhered to. 44 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

47 Dimensions SHOWER TOWers showerheads AND PUSH TAPS Showers & Bath Filling SH High security WM showerhead Fixing: 1/2 BSP (22mmø clearance drill hole) SH Ceiling mounted high security showerhead Fixing: 1/2 BSP (22mmø clearance drill hole) SH Ceiling height shower tower Fixing: Screw Fix SH Standard shower tower Fixing: Screw Fix SH Fixing plate for wall mounted high security showerhead, shower sensor or temperature blending valve adjuster D173/AL/CM/FP Backplate for ceiling mounted high security showerhead 1/2 1/2 1/ M / M SH Standard aqua chrome showerhead Fixing: 1/2 BSP (22mmø clearance drill hole) MT WM push tap for showers Top Inlet MT WM push tap for showers Back Inlet MT WM concealed push tap for showers Top Inlet Please note: Illustrations not to scale Dart Valley Systems t: f: e: w: 45

48 Showers & Bath Filling Dimensions TEMPERATURE BLENDING VALVE ADJUSTERS ø70 ø70 ø / / / SH mm to 22mm temperature blending valve adjuster Fixing: 3/4 BSP (28mmø clearance drill hole) SH mm temperature blending valve adjuster Fixing: 3/4 BSP (28mmø clearance drill hole) SH mm temperature blending valve adjuster Fixing: 3/4 BSP (28mmø clearance drill hole) SENSORS AND CONTROL SYSTEMS AC Tactile switch with 38mmø bezel (for use with tactile sensor plates) Cable length: 3m Fixing: 3/4 BSP (28mmø clearance drill hole) AC (blue insert) AC (red insert) Tactile switch with 50mmø bezel Cable length: 3m Fixing: 1/2 BSP Fixing for extension: 3/8 BSP (22mmø clearance drill hole) SH Wave-on sensor with 50mmø bezel Cable length: 8m Fixing: 3/8 BSP (22mmø clearance drill hole) CONTROL BoxeS SH and SH Shower and bath control systems SH and SH Channel Control Box SH and SH Channel Control Box Please note: Illustrations not to scale 46 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

49 Dimensions BATH FILLING Showers & Bath Filling ø44 ø44 G3/8 G1/ VR High security bath filling backplate VR Wave-on sensor for backplates with Blue insert (C) 3m cable VR Wave-on sensor for backplates with Red insert - (H) 3m cable BATH FILLING BATH FILLING SHOWER WARM COLD PUSH SH High security WM bath spout Fixing: 3/4 BSP (28mmø clearance drill hole) Please note: Illustrations not to scale SH and SH Dual sensor bath filling plates Fixing: Screw fix SH Shower plate with Push indication Fixing: Screw fix VR High security bath filling backplate (bath filling option 1) 47

50 Showers & Bath Filling SHOWERS & bath filling Shower Towers Profile (Not to scale) Code Description SH SH SH AC Standard tower with high security showerhead - Push (Auto Close) Standard tower with high security showerhead - Wave-on - Mains Standard tower with high security showerhead - Tactile - Mains Thermostatic mixing valve 4in1-15/22mm! Notes: These standard shower towers do not include a TMV3 mixing valve. A TMV3 valve must be purchased separately if mixed water is required. SH SH SH AC SH SH SH Ceiling height towers Ceiling height tower with high security showerhead - Push (Auto Close) Ceiling height tower with high security showerhead - Wave-on - Mains Ceiling height tower with high security showerhead - Tactile - Mains Thermostatic mixing valve 4in1-15/22mm Ceiling height towers with in-built TMV3 Ceiling height TMV3 tower with high security showerhead - Push (Auto Close) Ceiling height TMV3 tower with high security showerhead - Wave-on - Mains Ceiling height TMV3 tower with high security showerhead - Tactile - Mains! Notes: Standard ceiling height shower towers do not include a TMV3 mixing valve. A TMV3 valve must be purchased separately if mixed water is required. TMV3 shower towers however include an in-built TMV3 mixing valve. Showerheads & Fixing Plates Profile (Not to scale) Code Description SH SH SH High security showerhead - 30 (80mm long from top) High security showerhead - Ceiling mounted Replacement loose white rings for the above showerheads! Notes: Wall mounted. Substantially reduced ligature risk. Standard finish is brushed stainless steel. Polished finish also available. High security showerheads come standard with 60mm 1/2" BSP fixing thread. A B SH SH Backplate for securing SH ceiling mounted showerhead Square fixing plate suitable for SH07-040, shower sensor and blending valve adjuster! Notes: Standard finish is brushed stainless steel. Push Operated Shower Button Profile (Not to scale) Code Description MT MT MT MT WM shower push tap (Auto Close) - Top inlet WM shower push tap (Auto Close) - Back inlet WM concealed shower push tap (Auto Close) - Top inlet Replacement cartridge for shower push taps (20-25 secs)! Notes: Wall mounted. Chrome plated brass. Minimum pressure of 1 BAR recommended. 48 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

51 Temperature Blending Valve Profile (Not to scale) Code Description SH SH SH AC Temperature blending valve adjuster - for 1.5mm to 22mm wall thickness Temperature blending valve adjuster - for 180mm wall thickness Temperature blending valve adjuster - for 280mm wall thickness Thermostatic mixing valve 4in1-15/22mm Showers & Bath Filling! Notes: Wall mounted. Chrome plated brass. It is highly recommended that a thermostatic TMV3 valve is used prior to the adjuster to avoid scalding. Control Systems Profile (Not to scale) Code Description SH SH SH SH SH SH AC AC AC PP PP Shower control system - 1 station kit - Wave-on sensor Shower control system - 2 station kit - Wave-on sensors Shower control system - 1 station kit - Tactile switch with 50mmø bezel Shower control system - 2 station kit - Tactile switches with 50mmø bezels Shower control system for 1 or 2 showers (control box only) Bath control system - For use with bath filling plates (control box only) Plastic valve (12v DC) with 3m cable and spade connectors 12v DC Normally closed valve 4mm - 3W BAR TPL v DC Normally closed valve 7.1mm - 3W BAR TPL25593 Shower/Bath control system fuse - Primary - 20mm Glass 240V (T)100mA Shower/Bath control system fuse - Secondary - TR5 (F)500mA! Notes: Kits include control box, power supply, sensor, 50mmø bezel and solenoid valve with 3m cable and spade connectors. Wave-on sensor bezel is chrome. Standard tactile switch bezel is stainless steel. Requires minimum pressure of 0.5 BAR. Must be used with 3W 12V DC NC solenoids. A B SH AC SH AC AC (A) (B) Wave-on shower sensor with 50mmø chrome bezel - c/w 8m cable Tactile switch with 50mmø s/st bezel and red insert (Hot) - c/w 8m cable Wave-on shower sensor with 50mmø chrome bezel c/w 15m cable Tactile switch with 50mmø s/st bezel and Blue insert (Cold) c/w 15m cable Tactile switch with 50mmø s/st bezel and Red insert (Hot) c/w 15m cable AC AC AC Sensor thread extension for 100mm wall thickness Sensor thread extension for 150mm wall thickness Sensor thread extension for 250mm wall thickness Battery Operated Shower and Bath Control (use 6v latching valves) Profile (Not to scale) Code Description SH SH SH SH Channel shower control box - c/w 6 x AA Batteries 2 Channel shower control box - c/w 6 x C Cell Batteries 2 Channel bath fill control box - c/w 6 x AA Batteries 2 Channel bath fill control box - c/w 6 x C Cell Batteries Bath Filling Profile (Not to scale) Code Description VR VR VR VR VR Option 1 High-security bath filling backplate (not including sensors) Push sensor for back plates with Blue insert (Cold) c/w 3m cable Push sensor for back plates with Red insert (Hot) c/w 3m cable Wave-on sensor for back plates with Blue insert (Cold) c/w 3m cable Wave-on sensor for back plates with Red insert - (Hot) c/w 3m cable SH SH SH SH AC Option 2 High security WM bath spout - 45 (113mm long from top) Bath filling plate with half-fill/full-fill, 2 x tactile switch Bath filling c/w half-fill/full-fill indication - plate only Shower push control plate only, 1 x tactile switch required Tactile switch with 38mm bezel for use with control plates Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 49

52 Water management WaTer management Although water is often a huge cost faced by businesses and organisations, it is sometimes perceived as one of the most difficult areas to tackle. DVS s experienced team can advise on the most suitable product solutions for each environment based on usage patterns and payback periods. DVS Water Management products offer up to 60% water saving... 50

53 DVS offer numerous water management products to help save you water, money and timely maintenance visits. Water management overflow DeTecTioN system WaTer isolation system ac Water Isolation System ac Overflow detection control system ac Overflow warning light panel The Overflow Detection (OFD) Control System is designed for companies with large numbers of WCs on site. The control system can monitor up to 20 cubicles and is usually remotely sited; in the cleaner s cupboard at the end of a toilet block for example. The DVS water isolation system is designed to shut off the water supply to washroom facilities when they are not occupied, preventing water wastage and possible damage from overflows. The product is available with one or two solenoid valves for hot and cold water isolation and is offered as either battery or mains operated systems. The water isolation system works by fitting the sensor above the entrance to the washroom facilities. The sensor is capable of detecting movement up to 6m from the control box. If the washroom is empty, the system will shut off the water supply, preventing wastage from leaks and overflows, avoiding flooding and damage to the washroom. The digital display on the front of the control box makes it easy to identify which cistern is overflowing. There is also the facility to have an additional warning light panel outside the cleaner s cupboard which will flash until the problem is rectified. You can also monitor the OFD control system from a BMS system if necessary. Features include: X No more unsightly Visi-Boxes or Tundishes required in the WC cubicles X Identifies overflowing WC cisterns immediately X Warning panel will continue to flash until rectified X Will pay for itself in water saving X Easy to install and maintain Water Isolation System Water Saving The main purpose of the OFD Control System is to save water. The calculations below show how savings are achieved: 1 x WC cistern overflowing at a very nominal 1 litre per minute will use 1440 litres of water every 24 hours, equalling 1.4m³ per day. 1.4m³ per day (if undetected for a month) = 43.4 m³ x water and sewerage cost of 2.00 per m³ (national average) = 86 per month on one unidentified WC cistern overflow. Major clients include: X BAA Airports X Local Authorities X Office and Retail X Schools, colleges and universities X Perth & Kinross Council X Carlisle City Council Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 51

54 Water management A quick and easy solution to reduce the speed of water flow, with a very short payback period. FLoW restricting VaLVe Restrictaflow - Adjustable flow rate Restrictaflow offers savings of approximately 40%, and the unit is so inexpensive that you can be confident of recovering the cost in a few weeks. The flow is adjustable, and the valve can also be isolated. If you are considering fitting standard isolating valves, Restrictaflow delivers the flexibility of an isolation valve alongside considerable water and energy saving benefits. Water In: 20L/min Water Out: 6L/min Save water and energy costs... with Restrictaflow! ac Restrictaflow Dimensions overflow DeTecTioN control system ac Overflow detection control system Mains cable length: 1.5m ac Float switch Cable length: 500mm Fixing: M16 (16mmø clearance drill hole) ac Stainless steel overflow warning light panel restrictaflow WaTer isolation system ac Restrictaflow valve - 15mm ac Water isolation system (Leads not included) Please note: Illustrations not to scale 52 Dart Valley systems t: f: e: sales@dartvalley.co.uk w:

55 WaTer management Water management Overflow Detection Control System Profi le (Not to scale) Code Description ac ac ac ac PP ac Overfl ow detection control system - Control box only (for up to 20 cubicles) Float switch - Individual Overfl ow detection control system - S/Steel overfl ow warning light panel - Single Overfl ow detection control system - S/Steel overfl ow warning light panel - Double Replacement fuse for overfl ow detection control system - 20mm Glass (T)50mA! Notes: 1 fl oat switch is required for each cistern that the control system will be monitoring. 1 control box will monitor upto 20 cubicles. Single station overfl ow detection control system - For a single WC cubicle! Notes: For monitoring a single WC cubicle and comes complete with light panel, power supply and fl oat switch. Restrictaflow Valve Profi le (Not to scale) Code Description ac Restrictafl ow in-line fl ow restricting valve - 15mm Water Isolation Kit Profi le (Not to scale) Code Description ac ac ac ac ac ac ac ac Uc Water isolation system kit with 1 x Standard 15mm latching valve - Battery Water isolation system kit with 1 x Standard 15mm latching valve - Mains Water isolation system kit with 2 x Standard 15mm latching valves - Battery Water isolation system kit with 2 x Standard 15mm latching valves - Mains Water isolation system kit with 1 x 22mm latching valve - Battery Water isolation system kit with 1 x 22mm latching valve - Mains Water isolation system kit with 2 x 22mm latching valves - Battery Water isolation system kit with 2 x 22mm latching valves - Mains Water isolation system fuse - TR5 (T)1.6A! Notes: Incorporates infrared sensors and shut off isolation solenoid valves. Kits come complete with controls, battery (or PSU) and 1 or 2 solenoid valves. 15mm valves standard. Showerheads Profi le (Not to scale) Code Description sh Standard aqua chrome showerhead sh Showerhead fl ow reducer insert - Reduces to 8 ltrs/min! Notes: Low fl ow energy and water saving showerhead. Chrome plated brass. Provides fl ow rate of 11 6 BAR. Minimum pressure of 1 BAR recommended Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 53

56 Washroom sanitaryware Washroom sanitaryware Offering a range of ready plumbed modules, WC pans, basins and urinals, high quality access panels and sanitaryware are the ideal accompaniment to the DVS range. Uc Urinal control system 54

57 DVS have teamed up with specialists The Sanitaryware Company to help provide an easier all-round solution to purchasing complete washroom suites. SanCeram ceramics compliment DVS products very well and add that finishing, professional touch. Washroom sanitaryware sanceram ceramics BY The sanitaryware company ceramics With SanCeram s large catalogue of ceramics you can be sure to find the perfect companion for so many DVS automatic washroom products. All the ceramics shown are vitreous china built to BS 3402 standards. The glaze is integral with the ceramic body and is resistant to water absorption, burning, stains, scratching and attack by acids or alkalis. sw Chartham Wall Hung Basin, 380mm with Right Hand Tap Hole Doc.m PacK sw Chartham Rimless WC BTW 750mm Projection sw Chartham Back To Wall WC, 480mm High sw Chartham Concealed Trap Urinal sw Chartham Standard Wall Hung WC sw SanCeram Back to Wall Doc M Pack, Left Handed with White Rails. WasTes sw Chartham 500mm Wall Hung Basin with Right Hand Tap Hole sw Chartham Wall Hung Back Outlet Basin sw /4 Click Clack Unslotted Waste sw /4 Click Clack Slotted Waste sw /4 Unslotted Strainer Waste sw /4 Slotted Strainer Waste Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 55

58 Washroom Sanitaryware Dimensions ceramics Ø14 Ø SW & SW Chartham basin WH 380mm RH/LH tap hole options SW Chartham basin WH 500, back outlet SW & SW Chartham basin WH 500mm RH/LH tap hole options SW Chartham WC BTW 450mm Ø SW Chartham WC BTW 480mm SW Chartham concealed trap urinal sw Chartham WC WH standard SW Chartham WC BTW 750mm Please note: Illustrations not to scale SW SanCeram Back to Wall Doc M Pack, Left Handed with White Rails. 56 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

59 washroom SANITARYWARE Ceramics All the ceramics shown are vitreous china built to BS 3402 standards. Washroom Sanitaryware Ceramics Profile (Not to scale) Code Description SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW Chartham WC WH standard Support brackets & fixings for WH WC Chartham WC BTW 450mm Chartham WC BTW 480mm Chartham WC BTW 700mm Chartham WC BTW 750mm Chartham seat & cover, wall hung only Chartham seat & cover, standard BTW Chartham seat, no cover white Chartham seat, no cover blue Chartham concealed trap urinal Chartham urinal spreader Chartham urinal separator 1 1/2 plastic domed waste 1 1/2 P trap 75mm seal 1 1/2 plastic elbow Chartham basin WH 500, back outlet 11/4 Waste outlet adaptor, hanger and toggie bolts Chartham basin WH 500mm RH tap Chartham basin WH 500mm 2 tap Chartham basin WH 380mm RH tap Chartham basin WH 380mm LH tap Doc M LH White Doc M LH Blue Doc M RH White Doc M RH Blue SW SW SW SW /4 Strainer Waste, Slotted 1 1/4 Strainer Waste, Unslotted 1 1/4 Click Clack Slotted Waste 1 1/4 Click Clack Unslotted Waste Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 57

60 Washroom hygiene Washroom hygiene A brand of the P+L Systems Group, P+L Systems Washroom is Europe s leading supplier of fragrances and dispensers with over 25 years experience in developing products for commercial washroom use. From low energy hand dryers to sophisticated fragrances, choose from a range of products to add the perfect finishing touch to your washroom. 58

61 For more information on the full range of P+L Systems Washroom products please visit Washroom hygiene FraGraNce DisPeNsers Using Fragrance Dispensers allows continuous control of odours, and can provide up to one months continuous protection. The Fragrance Dispenser comes complete with a built in 24 hour clock and programmable spray time to maximise spray efficiency. LCD Fragrance Dispensers Features: X Strong chemical resistant polypropylene plastic X Low battery indicator - Red LED X Empty can indicator - Green LED X Lockable dispenser with generic key X 5 year guarantee X Requires 2 x C size alkaline batteries X Factory set for metred 15 minute, 7 day release X Complete flexibility of start/stop time X Complete flexibility of spray time between 1 and 60 minutes X Days remaining can life indication X Built in 24 hour clock X Day off programming capability ac Chrome Precious Fragrances ac White The Precious range of fragrances has been developed to offer a range of luxurious environment enhancers. Each fragrance is rich and distinct, and evolves throughout the day offering a carefully selected blend of aromas to capture the senses. VirTUaL JaNiTor The Virtual Janitor attacks foul odours at source using antimicrobial agents to kill bacterial growth within urinal pipes. The built in fragrance also works in tandem with the metered fragrance dispenser, using the flexible drip tube or directly into the down pipe using the in-line installation kit, to constantly perfume the washroom. ac White Virtual Janitor Features: X Easy to install X Low cost to operate, refills last 30 or 60 days X Saves daily cleaning and chemical costs X Complete mounting kit X Lockable unit with generic key X Requires 2 x C size alkaline batteries X Available with in-line installation kit Virtual Janitor Refills Choose from three fresh smelling, antimicrobial fragrances: X Mango X Apple Mint X French Kiss ac Chrome Virtual Janitor Fragrances Available: X W501 Precious Ruby X W502 Precious Sapphire X W501 Precious Amethyst X W502 Precious Amber X W502 Precious Emerald Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 59

62 Washroom hygiene Choose from a range of automatic washroom products to encourage hygienic hand washing and drying. PoWerFUL LoW PoWer DraW hand DrYers Combining high speed hand drying with efficient low power draw, these powerful dryers offer energy-conscious users an ideal eco-dry solution. Perfect for high traffic washrooms, this range offers a speedy hand drying time, as well as a robust yet stylish brushed stainless steel cover, making them a stunning addition to contemporary washrooms. GreaT VaLUe hand DrYers in a range of FiNishes Available in white plastic, brushed stainless steel and white metal finishes, this range of high quality, reliable automatic hand dryers offers great value for money. ac Hand dryer 2100w, brushed stainless steel ac Hand dryer 1000w, brushed stainless steel ac Hand dryer 2100w, white metal Features include: Specification: X Contemporary design X High speed 29,000 RPM motor X Robust, brushed stainless steel cover X Security lock screws X Discreet or simple wiring options X second drying time X 3 year guarantee X AC v / 50-60Hz X 3.8 kg X 29,000 r.p.m X Reduced 1000w power draw X 75 db ac Hand dryer 1600w, brushed stainless steel Features include: X Contemporary design X High speed 5,000 RPM motor X Security lock screws X Discreet or simple wiring options X 30 second drying time X 2 year guarantee ac Hand dryer 2100w, white plastic Specification: X AC 230v / 50Hz X 5,000 rpm X Effective 2100w draw X 75db Features include: X Contemporary design X High speed 18,000 RPM motor X Ergonomic blue lighting hands to optimum drying zone X Robust, brushed stainless steel cover X Security lock screws X Discreet or simple wiring options X second drying time X 5 year guarantee Specification: X AC v / 50-60Hz X 5.8 kg X 18,000 rpm X 1600w power draw X 78db Save money with the low power draw of the eco-dry range, with payback of less than 35 months DVS powerful automatic hand dryers boast a very high specification and come in a variety of finishes/materials. 60 Dart Valley systems t: f: e: sales@dartvalley.co.uk w:

63 automatic LiQUiD soap DisPeNser Automatic liquid soap dispensers have builtin sensors which detect a users hands when placed under the dispenser. A clean shot of liquid soap is dispensed automatically without any need to touch the unit, reducing crosscontamination and substantially improving hygiene in the washroom. BaBY changing Installing a changing station provides parents with a safe, convenient and hygienic changing facility in away from home locations. Washroom hygiene ac White Changing Station Changing Station Features include: ac Automatic soap dispenser, stainless steel Features include: X Touch-free operation X Vandal resistant casing X Requires 3 x 1.5v C cell batteries X Battery-low indicator X Capacity 800cc of soap ac Automatic soap dispenser, white Features include: X Touch-free operation X Stylish, contemporary design X Security locking system X Requires 6 x AA batteries X Battery-low indicator X Liquid & soap compatible X Compact ultra-slim profile X Heavy-duty integral moulded hinges for strength and safety X Gas-strut dampened for controlled and safe opening/closing X Easy-load integral moulded dual liner dispensers, fully encapsulated for hygiene assurance X Twin integral moulded bag-hooks for convenience X Soft-feel waterproof retaining strap X Heavy-duty fixings for safety assurance X Large radius internal contours for comfort and safety X 5 year guarantee 61

64 Washroom Hygiene Dimensions WASHROOM HYGIENE AC LCD Fragrance dispenser - White AC LCD Fragrance dispenser - Chrome AC / AC Virtual Janitor - White / Chrome AC Automatic liquid soap dispenser - White (149 Deep) 294 (184 Deep) 273 (207 Deep) AC Automatic liquid soap dispenser - Stainless Steel AC Hand dryer 1000w, brushed stainless steel AC Hand dryer 1600w, brushed stainless steel AC Hand dryer 2100w, brushed stainless steel 273 (207 Deep) 273 (207 Deep) AC Hand dryer 2100w, white metal AC Hand dryer 2100w, white plastic AC Changing station - white Please note: Illustrations not to scale 62 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

65 WASHROOM Hygiene Washroom Hygiene Washroom Fragrancing Profile (Not to scale) Code Description AC AC PP LCD White aerosol dispenser LCD Chrome aerosol dispenser C-Cell Procell battery for use with dispenser AC AC AC AC AC Precious range Amber Precious range Amethyst Precious range Emerald Precious range Ruby Precious range Sapphire AC AC AC AC AC AC PP Virtual Janitor White Virtual Janitor Chrome Virtual Janitor In-Line Kit Refill - Single - Apple Mint 298ml Refill - Single - French Kiss 292ml Refill - Single - Mango 298ml C-Cell Procell battery for use with dispenser Hand Dryers Profile (Not to scale) Code Description Soap Dispensers AC AC AC AC AC Hand Dryer Brushed S/Steel 1000w Hand Dryer Brushed S/Steel 1600w Hand Dryer Brushed S/Steel 2100w Hand Dryer White Metal 2100w Hand Dryer White Plastic 2100w Profile (Not to scale) Code Description AC AC AC PP Automatic soap dispenser - Stainless steel Standard washroom soap re-fill Automatic soap dispenser -White AA Batteries Baby Changing Profile (Not to scale) Code Description AC Changing station, White Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 63

66 safe ensuites safe ensuites Designed for the toughest environments and manufactured using advanced technologies, safe-ensuite sanitaryware is robust yet designed to look domestic, making it ideal for therapeutic environments. Vr Vr High security basin and optional backplate with moulded shelf Vr High security WC pan (with optional side infill available left or right of pan) Tested at the HMP test centre 64

67 The impressive range of DVS high security sanitaryware has been specially designed and developed for high security applications. Their design and construction are unique and unrivalled. The products have a gloss finish similar to that of porcelain, giving an attractive domestic look. safe ensuites high security sanitaryware The techniques employed to construct these high security products are used very successfully in the field of ballistic armour. Additional properties include high resistance to cyclical stresses and dual stage failure mode. This provides excellent impact resistance and will not be subject to catastrophic failure. Safety The DVS high security sanitaryware range has been designed and tested to be vandal proof and avoid ligature points wherever possible. The sanitaryware has been tested at HMP test centre at Lindholme. Unfortunately we cannot guarantee protection against those intent on self-harm, but consider that the designs and precautions taken are to a very high standard, reducing the risks significantly. The surface of the product is a high-grade polyester gel coat specifically formulated for use with sanitaryware. It is formulated to produce high chemical resistance and resistance to ultraviolet effects. Applications DVS offer a range of ensuite packages, ensuring that you can select the perfect solution for your safe accomodation requirements. The unique features suit high and low risk mental health units, prisons, police cells and other custodial applications. The ProBLem Convential safe-ensuite sanitaryware can be broken and can shatter, producing dangerous shards of material for self harm or to harm others. Conventional safe-ensuite sanitaryware is also extremely heavy, often needing 2 people to carry a single WC pan! The solution! DVS high security sanitaryware has excellent impact resistance and will not shatter or produce dangerous shards of material. As well as being very tough, the product is light with a toilet pan weighing less than 17kg! Vr Wall hung pan Common features: X Designed for high-security applications X Virtually indestructible X High impact resistance X Anti-shatter moulded resin (avoiding the possibility of obtaining dangerous material, for self harm or to harm others) X Home Office tested for anti-vandal, reduced-ligature and fi re resistance X Secure wall mount fixings (included) X White sanitaryware grade gel coated finish X Hygienic non-porous surface X Attractive domestic look DVS use ballistic armour manufacturing technologies for the production of a unique range of safe-ensuite sanitaryware. Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 65

68 safe ensuites The unique features suit high and low risk mental health units, prisons, police cells and other custodial applications. Wc PaN & extras WC Pan features: X Concealed rear waste outlet X Large trap to reduce blockages X Optional facilities to lock-out water operations X Optional side in-fills X Optional disabled riser and spacer box Wash Basin features: Vr High security WC pan (with optional side infill available left or right of pan) Vr Wall hung pan Vr Disabled WC pan white enamelled steel spacer box (for use with high security disabled WC pan only) Wash BasiN & BacKPLaTes X Rear concealed waste outlet X Water thermostatically controllable (using separate TMV3 valve - not supplied) X Loose rubber plug (no chain, avoids ligature) X In-built sensors (sold seperately) X In-built water spouts X Moulded soap shelves X Wave-on control (sold seperately) X Facilities to lock-out water operations X Optional backplate with moulded shelf X Spectrum backplate designed specifically to fit on top of Twyford Spectrum wash basin Mirror features: X Moulded frame X Virtually indestructible plastic mirror Soap Dish features: Vr High security basin and backplate Vr Vr High security basin and optional backplate with moulded shelf other/accessories Vr Vr Optional small backplate Optional for use with small High backplate Security basin (VR01-001) Vr Spectrum backplate (designed for Twyford Sola Spectrum wash basin) X Moulded soap outlet for easy cleaning X Easy and secure method of fixing No-Touch Wave-On Sensor features: X Extremely reliable X Reduced-ligature X Vandal resistant High Security Deck Mount Tap features: X Extremely reliable X Reduced-ligature X Vandal resistant Vr High security mirror Vr High security corner soap dish at High security deck mounted spout, brushed Vr Hand rinse Vr Urinal 66 Dart Valley systems t: f: e: sales@dartvalley.co.uk w:

69 Washroom control systems safe ensuites The Washroom Control System has been specially designed to meet the requirements of the modern day safe-ensuite in mental health units, prisons and police cells. Dart Valley Systems also offer individual controls for taps, showers or WC flushing, however the Washroom Control System offers an outstanding value for money all encompassing control package. Capable of managing: X DVS WC Flushvalve X Shower control X Call-out button for manual or computer interfacing X Hot and cold tap control (ideal for controlling the DVS high security backplate with in-built water spouts) X All of the above controls have the built in option of Lock- Out, to limit the amount of operations in each period of adjustable run times Features include: X Multi-function unit from one control X Variable functions allowing custom setups to suit individual requirements X Optional reset or lock-out feature from a keyswitch controlled pad X Lock-outs (selectable) X Optional call-out button X Can be integrated to monitor water usage and number of times used X Covers a variety of uses (reduces installation and unit cost dramatically) X Purge facility Major clients include: X Interserve X Laing O Rourke X Crown House Technologies X WH Foster X Bushboard X St Andrews Healthcare X Off Site Solutions X Cumbria Partnership NHS Foundation X Venesta Washrooms X Care Principles Ltd The DVS Washroom Control System is capable of managing WC flushing, shower control, and a wash basin with two tap spouts. Tap Control System The tap control system can be used to control mixed water for 1 or 2 taps, or to control both hot and cold on a single tap using 2 sensors. The control system can be used with wave-on or tactile sensors. The tap control system also features built-in purge control option to avoid stagnation. When a user waves their hand past the sensor (or pushes the tactile switch) the control system activates the solenoid valve. The valve will then run for a pre-set time before automatically closing the valve and stopping the tap. Various settings can be customised quickly and easily from within the control box if necessary. Features include: Vr Washroom Control System ac ac Anti-Vandal Sensors X Saves water, switches off after pre-set time X No-touch - Helps avoid cross infection X High performance & reliability X Adjustable run-time X Settings allow option to wave-off at Tap Control System Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 67

70 safe ensuites A range of safe ensuite packages make selecting the right products simple, including high risk and low risk options. complete ensuite PacKaGes There are two categories to consider: X High risk (includes unbreakable sanitaryware) X Low risk (includes Twyford ceramic sanitaryware with DVS backplate) Standard DVS ensuite products are designed and tested for the high risk category and are proposed for these areas. Safety Dart Valley Systems high security safe-ensuite products have been designed and tested to be vandal proof and avoid ligature points wherever possible. The sanitaryware has been tested at HMP test centre at Lindholme. Unfortunately we cannot guarantee protection against those intent on self-harm, but consider that the designs and precautions taken are to a very high standard, reducing the risks. Features include: X Designed to avoid ligature points X Products designed to be vandal proof X Reduces the possibility of patients obtaining dangerous material, for self harm or to harm others X Water is thermostatically controlled X Facilities to lock-out water operations X Easy to use X Aesthetically attractive Package Categories There are two packages available for each category. Both categories offer suites with and without shower facilities. High Risk Ensuite The High Risk category includes DVS unbreakable sanitaryware to increase the overall security of the ensuite. This sanitaryware has been specially designed for high security applications with several safety advantages over standard sanitaryware. Low Risk Ensuite Some Trusts may consider that low risk areas do not require specialist unbreakable sanitary ware. High security basin and backplate and Galerie WC pans are therefore proposed for these areas. In every other respect the High Risk and Low Risk safe ensuites are to the same specification. This means that the operation, technology, products and maintenance are standard throughout. Sensor Options There are two options for operating the shower and WC Flushvalve. Both are vandal proof and virtually ligature free. Most installations use the waveon sensor but some prefer the push button tactile switch to reduce the risk of accidentally turning on the shower. ac Anti-vandal wave-on sensor with 50mmø chrome bezel for WC ac Tactile switch with 50mmø s/steel bezel sh Ligature Resistant Blending Valve 68

71 high risk ensuite PacKaGes safe ensuites Package 1 - High Risk excl. shower Package 2 - High Risk incl. shower Package 1 includes: 1 x Washroom control system 1 x TMV3 Thermostatic mixing valve 2 x Solenoid valves 1 x High security backplate 1 x High security basin 1 x WC Anti-vandal wave-on sensor 1 x WC Flushvalve 1 x Concealed cistern kit 1 x High security WC pan Package 2 includes: All of Package 1 plus: 1 x Shower sensor for showerhead 1 x Anti-ligature showerhead 1 x Additional TMV3 mixing valve 1 x Additional solenoid valve LoW risk ensuite PacKaGes Package 3 - Low Risk excl. shower Package 4 - Low Risk incl. shower Package 3 includes: 1 x Washroom control system 1 x TMV3 Thermostatic mixing valve 2 x Solenoid valves 1 x High security backplate 1 x High security basin 1 x WC Anti-vandal wave-on sensor 1 x WC Flushvalve 1 x Concealed cistern kit 1 x Twyford Galerie ceramic WC pan Package 4 includes: All of Package 3 plus: 1 x Shower sensor for showerhead 1 x Anti-ligature showerhead 1 x Additional TMV3 mixing valve 1 x Additional solenoid valve Dashed Outline = Low Risk Twyford Sanitaryware! Fixing Notes: All packages come complete with 70mm fixing kits. For other options please call our customer service team. Typical installation diagrams are intended as a guide only. Appropriate regulations should be adhered to. Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 69

72 safe ensuites Dimensions high security sanitaryware (*480) 370 Vr High security WC pan Vr High security Wall Hung Pan Vr High security basin and backplate Vr Disabled WC pan white enameled steel spacer box (for use with high security disabled WC pan only) Vr High security backplate with shelf Vr High security backplate for Spectrum basin Vr High security backplate for for Spectrum use with basin high security basin (VR01-001) /2 BSP /4 BSP Vr Electric Handrinse Please note: Illustrations not to scale Vr Urinal Bowl Dart Valley systems t: f: e: sales@dartvalley.co.uk w:

73 Dimensions Safe Ensuites Low security sanitaryware SW Sola Spectrum Washbasin (available with no tap holes only) SW Avalon - Rimless BTW WC pan Control systems and sensors CHARGE POWER VR Washroom control system Mains cable length: 1.5m WC Control box (PCB) for prison flushvalves Mains cable length: 1.5m AT Tap control system - Mains AT (Top) AT (Bottom) 2 Channel tap control box - Battery ø44 ø44 G3/8 G1/ AC (blue insert) AC (red insert) Anti-vandal wave-on sensor with 50mmø bezel Cable length: 3m Fixing: 1/2 BSP Fixing for extension: 3/8 BSP (22mmø clearance drill hole) AC (blue insert) AC (red insert) Tactile switch with 50mmø bezel Cable length: 3m Fixing: 1/2 BSP Fixing for extension: 3/8 BSP (22mmø clearance drill hole) SH Wave-on sensor with 50mmø bezel Cable length: 8m Fixing: 3/8 BSP (22mmø clearance drill hole) VR Wave-on sensor for backplates with Blue insert (C) 3m cable VR Wave-on sensor for backplates with Red insert -(H) 3m cable Please note: Illustrations not to scale Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 71

74 Safe Ensuites Dimensions WC FLUSHING AND OTHER ACCESSORIES CUT TO SUIT CISTERN ø OUTLET WC WC Flushvalve WC Concealed plastic cistern - Vertical VR High security mirror VR Corner high security soap dish Cable length: 3m Fixing: Standard 1 1/2 (2 available) WC /2 to 1 1/2 (A) WC to 1 1/2 (B) A = 430 B = 340 WATER OFF A = 430 B = 500 WC Concealed plastic cistern WC (A) / WC (B) Flushpipes AC Water control key switch for washroom control box Fixing: Screw fix SHOWERHEADS and nossles /2 BSP 21 SH High security WM showerhead Fixing: 1/2 BSP (22mmø clearance drill hole) SH Ceiling mounted high security showerhead Fixing: 1/2 BSP (22mmø clearance drill hole) SH Fixing plate for ceiling mounted high security showerhead AT High security deck mounted spout AT and AT High security stainless steel tap nossles. Basin mounted (left) or stainless steel mounted (right) D629 Fixing: 1/2 BSP D629/SS Fixing: 3/8 BSP Extension Fixing: 1/2 BSP Please note: Illustrations not to scale 72 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

75 SAFE ENSUITES Individual Safe Ensuite Products! Please Note: Fixing kits for high security sanitaryware and extensions for showerheads and sensors need to be specified below separately, due to possible variations in wall thicknesses across installation locations. Safe Ensuites Sanitaryware Profile (Not to scale) Code Description VR VR VR VR VR High security basin and backplate (not including sensors) High security basin only (without backplate) Replacement rubber bung/plug for filling basin Waste grid for use with DVS high security basin! Notes: Moulded soap shelves. Rear waste outlet. No overflow. Not including sensors. Includes 70mm fixing kit. Water spouts included. Push or wave-on sensors available. High security backplate (not including sensors)! Notes: For use with VR high security basin only. Not including sensors. Includes 70mm fixing kit. Water spouts included. Push or wave-on sensors available. VR High security backplate (not including sensors)! Notes: For use with VR high security basin only. Not including sensors. Includes 70mm fixing kit. Water spouts included. Push or wave-on sensors available. VR VR VR High-security basin filling backplate (not including sensors) High-security bath filling backplate (not including sensors)! Notes: Not including sensors. Includes 70mm fixing kit. Water spouts included. Push or wave-on sensors available. Extended high security backplate with moulded shelf (not including sensors)! Notes: For use with VR high security basin only. Not including sensors. Includes 70mm fixing kit. Water spouts included. Push or wave-on sensors available. VR VR VR VR VR VR VR VR VR VR VR Wave-on sensor for backplates with Red Insert (Hot) - c/w 3m cable Wave-on sensor for backplates with Blue Insert (Cold) - c/w 3m cable Push sensor for backplates with Red Insert (Hot) - c/w 3m cable Push sensor for backplates with Blue Insert (Cold) - c/w 3m cable Basin/backplate fixing kit for 100mm wall thickness Basin/backplate fixing kit for 150mm wall thickness Basin/backplate fixing kit for 250mm wall thickness! Notes: The above fixing kits contain all fixings required for basin, sensors and water inlets. High security mirror with white moulded frame Structural adhesive for securing mirrors and soap dishes! Notes: Unbreakable mirror. Matches other high security sanitaryware product range. High security soap dish Structural adhesive for securing mirrors and soap dishes VR VR VR VR VR VR VR VR VR VR VR VR VR High security WC pan Disabled high security WC pan (60mm higher) High security WC pan side in-fill c/w- Left side High security WC pan side in-fill c/w- Right side Disabled WC pan white enameled steel spacer box WC pan fixing kit for 70mm wall thickness WC pan fixing kit for 100mm wall thickness (standard supplied with WC pan) WC pan fixing kit for 150mm wall thickness WC pan fixing kit for 250mm wall thickness WC Seat retrofit kit option High security WC Pan c/w WC seat pre-fitted! Notes: The above fixing kits contain all fixings required for WC pan. Stainless Steel Electric Hand Rinse Stainless Steel Urinal Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 73

76 Safe Ensuites SAFE ENSUITES Ceramics All the ceramics shown are vitreous china built to BS 3402 standards. Sanitaryware (continued) Profile (Not to scale) Code Description VR High security wall hung pan SW SW Twyford Sola Spectrum Washbasin with no tap holes Twyford Sola Spectrum Basin fitting kit! Notes: Very low risk option. SW SW Twyford Avalon - Rimless Back-to-wall (BTW) WC pan Twyford Avalon - Seat and cover (or rim only) - Various seat covers available! Notes: Very low risk option. Washdown action with box flushing rim. Horizontal outlet. Fully concealed plumbing. Control Systems, Sensors and WC Flushing Profile (Not to scale) Code Description VR VR VR AT AC PP PP PP Standard washroom control system kit - For use with DVS high security backplates 2 Washroom control system kit - Domed Head sensor when backplates are not used 2 Washroom control system - Control box only Tap control system for 1 or 2 taps (control box only) Plastic valve (12v DC) with 3m cable and spade connectors Tap control system fuse - Primary - 20mm Glass 240V (T)100mA Tap control system fuse - Secondary - TR5 (F)500mA Replacement fuse for washroom control system - 20mm Glass (T) 125mA! Notes: Standard kit includes 1 x Control box, 1 x WC Flushvalve, 3 x Wave-on sensors (1 for WC, 2 for basin), 2 x Solenoid valves for tap control plus connection 3m. The kit does not include a sensor for shower operation. A B C D SH AC AC AC AC SH AC AC AC AC VR VR VR VR VR (A) (B) (B) (C) (C) (D) (D) (D) (D) (D) Wave-on shower sensor with 50mmø chrome bezel c/w 8m cable Anti-vandal wave-on WC sensor with 50mmø s/st bezel - Red Insert (Hot) c/w 3m cable Anti-vandal wave-on WC sensor with 50mmø s/st bezel - Blue Insert (Cold) c/w 3m cable Tactile switch with 50mmø s/st bezel - Red Insert (Hot) c/w 3m cable Tactile switch with 50mmø s/st bezel - Blue Insert (Cold) c/w 3m cable Wave-on shower sensor with 50mmø chrome bezel c/w 3m cable Anti-vandal wave-on sensor with 50mmø Blue Insert (Cold) c/w 15m cable Anti-vandal wave-on sensor with 50mmø Red Insert (Hot) c/w 15m cable Tactile switch with 50mmø s/st bezel and Blue Insert c/w 15m cable Tactile switch with 50mmø s/st bezel Red Insert (Hot) c/w 15m cable Wave-on sensor for backplates with Blue Insert (Cold) c/w 3m cable Wave-on sensor for backplates with Blue Insert (Cold) c/w 15m cable Wave-on sensor for backplates with Red Insert (Hot) c/w 15m cable Push sensor for backplates with Blue Insert (Cold) c/w 15m cable Push sensor for backplates with Red Insert (Hot) c/w 15m cable! Notes: Includes bezels. All suitable for use with the washroom control system. Sensor thread extension for 100mm wall thickness Sensor thread extension for 150mm wall thickness Sensor thread extension for 250mm wall thickness AC AC AC WC Flushvalve with in-built overflow (valve only) - 2" base WC Concealed Plastic Cistern - Vertical - 2 kit! Notes: Kit Includes cistern, fixing plates, torbeck valve, flushpipe and fittings for back of pan. 74 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

77 SAFE ENSUITES Safe Ensuites Showerheads and Accessories Profile (Not to scale) Code Description SH SH High security showerhead - 30 (80mm long from top) Replacement loose white rings for the above showerheads! Notes: Wall mounted. Substantially reduced ligature risk. Standard finish is brushed stainless steel. Polished finish also available. High security showerheads come standard with 60mm 1/2" BSP fixing thread. SH SH High security showerhead - Ceiling mounted Replacement loose white rings for the above showerheads! Notes: Ceiling mounted. Substantially reduced ligature risk. Standard finish is brushed stainless steel. Polished finish also available. High security showerheads come standard with 60mm 1/2" BSP fixing thread. A B SH SH (A) (B) Backplate for securing SH ceiling mounted showerhead Square fixing plate suitable for SH07-042, shower sensor and blending valve adjuster! Notes: Standard finish is brushed stainless steel. AT High security tap nossle - Basin mounted! Notes: Standard finish is brushed stainless steel. 1/2" BSP. AT High security tap nossle - Stainless steel mounted! Notes: Standard finish is brushed stainless steel. 3/8" BSP. AT AT High security deck mounted spout - Brushed High security deck mounted spout - Polished WATER OFF AC AC AC AC Water control key switch kit - 12v DC* Water control key switch kit - Two valve - 12v DC* Water control key switch kit for 2 channel Water control key switch (with 5m cable)** *For water isolation. Includes PSU, 15mm plasic valve(s) and leads. **Suitable for use with the washroom control system for isolating water or resetting lockouts. Anti-Pick Sealant Profile (Not to scale) Code Description VR VR VR VR Heavy duty anti-pick sealant with nossle - In White - 250ml (uses standard gun) Replacement nossle for anti-pick sealant Structural adhesive for mirrors Special twin gun (only required for structural adhesive)! Notes: Specially formulated "white" anti-pick sealant for custodial applications. Can be applied using standard heavy duty sealant guns. The special nossle combines the two part sealant which is incredibly tough, adheres to most surfaces and cures in approx 3-4 hours. Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 75

78 Safe Ensuites SAFE ENSUITES Ensuite Package 1 - High Risk (excl. shower) Ensuite package 1 includes all of the individual items listed below except non-standard fixing lengths and optional extras. If longer fixing threads are required please specify. Fixing threads are available for 150mm, 200mm and 300mm wall thickness. Ensuite Package 1 - High Risk (excl. shower) Description Complete ensuite package 1 - High Risk (excluding shower) - Standard Package Breakdown - Individual Items Code VR VR VR WC AC Description High security WC pan High security basin and backplate kit with in-built spouts (warm and cold water) Standard washroom control system kit - For use with DVS high security backplates Concealed tall cistern kit (2 ) DVS thermostatic mixing valve (for basin) Fixings and Extensions (Not included in the standard package) Code VR VR VR VR VR VR AC AC AC Description WC pan fixing kit for 100mm wall thickness (standard supplied with WC pan) WC pan fixing kit for 150mm wall thickness WC pan fixing kit for 250mm wall thickness Basin/backplate fixing kit for 100mm wall thickness Basin/backplate fixing kit for 150mm wall thickness Basin/backplate fixing kit for 250mm wall thickness Sensor thread extension for 100mm wall thickness (for WC sensor) Sensor thread extension for 150mm wall thickness (for WC sensor) Sensor thread extension for 250mm wall thickness (for WC sensor)! Notes: When ordering sensor extensions please specify for use with WC sensor. Options Code VR VR VR VR VR VR AC Description High security WC pan side in-fill - Left side High security WC pan side in-fill - Right side Disabled high security WC pan (60mm higher) Disabled WC pan white enameled steel spacer box Extended high security backplate with moulded shelf (not including sensors) High security mirror with white moulded frame Key switch for re-setting lock-outs (for Washroom Control System) 76 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

79 SAFE ENSUITES Safe Ensuites Ensuite Package 2 - High Risk (incl. shower) Ensuite package 2 includes all of the individual items listed below except non-standard fixing lengths and optional extras. If longer fixing threads are required please specify. Fixing threads are available for 150mm, 200mm and 300mm wall thickness.! Please Note: Fixing extensions for showerhead and sensor need to be specified below separately due to possible variations in wall thicknesses across installation locations. Ensuite Package 2 - High Risk (incl. shower) Description Complete ensuite package 2 - High Risk (including shower) - Standard Package Breakdown - Individual Items Code VR VR VR WC AC SH SH AC Description High security WC pan High security basin and backplate kit with in-built spouts (warm and cold water) Standard washroom control system kit - For use with DVS high security backplates Concealed tall cistern kit (2 ) DVS thermostatic mixing valve x 2 (1 for basin and 1 for showerhead) Anti-ligature showerhead Anti-vandal shower sensor for showerhead Solenoid valve for showerhead Fixings and Extensions (Not included in the standard package) Code VR VR VR VR VR VR AC AC AC Description WC pan fixing kit for 100mm wall thickness (standard supplied with WC pan) WC pan fixing kit for 150mm wall thickness WC pan fixing kit for 250mm wall thickness Basin/backplate fixing kit for 100mm wall thickness Basin/backplate fixing kit for 150mm wall thickness Basin/backplate fixing kit for 250mm wall thickness Sensor thread extension for 100mm wall thickness (for WC sensor, showerhead or shower sensor) Sensor thread extension for 150mm wall thickness (for WC sensor, showerhead or shower sensor) Sensor thread extension for 250mm wall thickness (for WC sensor, showerhead or shower sensor)! Notes: When ordering sensor extensions please specify for use with WC sensor. Options Code VR VR VR VR VR VR VR SH AC Description High security WC pan side in-fill - Left side High security WC pan side in-fill - Right side Disabled high security WC pan (60mm higher) Disabled WC pan white enameled steel spacer box Extended high security backplate with moulded shelf (not including sensors) High security mirror with white moulded frame High security ceiling showerhead Showerhead temperature blending valve Key switch for re-setting lock-outs (for Washroom Control System) Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 77

80 Safe Ensuites SAFE ENSUITES Ensuite Package 3 - Low Risk (excl. shower) Ensuite package 3 includes all of the individual items listed below except non-standard fixing lengths and optional extras. If longer fixing threads are required please specify. Fixing threads are available for 150mm, 200mm and 300mm wall thickness. Ensuite Package 3 - Low Risk (excl. shower) Description Complete ensuite package 3 - Low Risk (excluding shower) - Standard! Notes: Includes standard fixing kits suitable for IPS panels. Excludes optional extras. Package Breakdown - Individual Items Code SW SW VR VR WC AC Description Twyford Avalon ceramic WC pan (Includes fixings) Twyford Avalon - Seat and cover only High security basin and backplate kit with in-built spouts (warm and cold water) Standard washroom control system kit - For use with DVS high security backplates Concealed tall cistern kit (2 ) DVS thermostatic mixing valve (for basin) Fixings and Extensions (Not included in the standard package) Code VR VR VR AC AC AC Description Basin/backplate fixing kit for 100mm wall thickness Basin/backplate fixing kit for 150mm wall thickness Basin/backplate fixing kit for 250mm wall thickness Sensor thread extension for 100mm wall thickness (for WC sensor) Sensor thread extension for 150mm wall thickness (for WC sensor) Sensor thread extension for 250mm wall thickness (for WC sensor)! Notes: When ordering sensor extensions please specify for use with WC sensor. Options Code VR AC Description High security mirror with white moulded frame Key switch for re-setting lock-outs (for Washroom Control System) Dashed Outline = Low Risk Twyford Sanitaryware 78 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

81 SAFE ENSUITES Safe Ensuites Ensuite Package 4 - Low Risk (incl. shower) Ensuite package 4 includes all of the individual items listed below except non-standard fixing lengths and optional extras. If longer fixing threads are required please specify. Fixing threads are available for 150mm, 200mm and 300mm wall thickness.! Please Note: Fixing extensions for showerhead and sensor need to be specified below separately due to possible variations in wall thicknesses across installation locations. Ensuite Package 4 - Low Risk (incl. shower) Description Complete ensuite package 4 - Low Risk (including shower) - Standard! Notes: Includes standard fixing kits suitable for IPS panels. Excludes optional extras. Package Breakdown - Individual Items Code SW SW VR VR WC AC SH SH AC Description Twyford Avalon ceramic WC pan (Includes fixings) Twyford Avalon - Seat and cover only High security basin and backplate kit with in-built spouts (warm and cold water) Standard washroom control system kit - For use with DVS high security backplates Concealed tall cistern kit (2 ) DVS thermostatic mixing valve x 2 (1 for basin and 1 for showerhead) Anti-ligature showerhead Anti-vandal shower sensor for showerhead Solenoid valve for showerhead Fixings and Extensions (Not included in the standard package) Code VR VR VR AC AC AC Description Basin/backplate fixing kit for 100mm wall thickness Basin/backplate fixing kit for 150mm wall thickness Basin/backplate fixing kit for 250mm wall thickness Sensor thread extension for 100mm wall thickness (for WC sensor, showerhead or shower sensor) Sensor thread extension for 150mm wall thickness (for WC sensor, showerhead or shower sensor) Sensor thread extension for 250mm wall thickness (for WC sensor, showerhead or shower sensor)! Notes: When ordering sensor extensions please specify for use with WC sensor. Options Code VR SH SH AC Description High security mirror with white moulded frame High security ceiling showerhead Showerhead temperature blending valve Key switch for re-setting lock-outs (for Washroom Control System) Dashed Outline = Low Risk Twyford Sanitaryware Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 79

82 healthcare healthcare htm & hbm compliant A comprehensive range of products designed with healthcare in mind. Selection of the correct products has been shown to increase hand washing compliance and reduce cross contamination as well as offering water saving benefits. No-touch products reduce the risk of cross contamination. MANUFACTURED 80 IN THE UK

83 The problem of healthcare acquired infection is high on the agenda of the Department of Health. There is increasing recognition of the problems and the associated costs. Hand hygiene is central to reducing the impact on staff, patients and trusts. healthcare healthcare No-touch products have been identified by the NHS as offering significant benefits subject to the reliability of the specified products. Dart Valley Systems have achieved extremely high levels of reliability and value for money. Many building guidelines (HBN s) recommend no-touch taps and WC Flushvalves. The HPA and DOH acknowledge that no-touch taps reduce the risk of cross contamination. DVS believe that the ease of use also encourages handwashing thus increasing compliance. WaTer conservation Dart Valley Systems have seen dramatic reductions achieved in water bills and with fast payback (even in healthcare applications) demonstrating a good business case for investment in water saving products. As well as providing optimum water savings DVS provide scientifically proven solutions that can assist with reduction in biofilms. Electronic taps use the optimum amount of water as the taps only run when the hands are placed under the spout, limiting the water use to the precise time required and preventing taps being left running. Typical Savings with DVS Products Include: X Clinical automatic no-touch taps: Up to 65% X No-touch WC Flushvalve: Up to 30% X Electronic urinal controls: Up to 80% X Self-closing push taps: Up to 50% Recent trials in large hospitals showed a 65% reduction in the water used per hand wash with no-touch taps compared to lever-operated taps. The number of hand washes doubled, confi rming the views that no-touch taps are so much easier to use and encourage hand-washing. Even for retro-fit, where the original taps have to be removed, payback on water savings alone can be as short as three years. No-ToUch automatic TaPs Hygiene Automatic taps are the most hygienic option available for hand washing. This is a very important aspect for all washrooms, but of increased importance for hospitals where crosscontamination needs to be avoided. Reliability DVS automatic taps have been extensively developed and tested to achieve the current high levels of reliability. James Paget Hospital commented Dart Valley Systems automatic taps have been totally reliable and are good value for money. Whilst the main consideration is hygiene to avoid cross contamination, automatic taps also make signifi cant savings on water. James Paget Hospital now have over 600 taps and have experienced outstanding performance from DVS taps. The hospital is also the most water efficient in their sector, medium acute outside London. Water Quality DVS designs offer optimum solutions to help maintain bacteria free water. Options available include automatic purging to avoid deadlegs and stagnant water, and thermal shock disinfection. Copper tails for taps can be provided if preferred to flexible connections. DVS have however carried out scientific evaluation at Plymouth University and recommend PEX lined hoses. Major clients include: Dart Valley Systems has a strong NHS client base, including: X Cambridge University NHS Foundation Trust X Heart of England NHS Foundation Trust X Blackpool, Fylde and Wyre Hospitals NHS Foundation Trust X Royal Cornwall Hospitals Trust X Dorset County Hospital NHS Foundation Trust X Hull and East Yorkshire Hospitals NHS Trust X Royal Brompton and Harefield NHS Foundation Trust X Wye Valley NHS Trust X Invicta Community Care Trust X James Paget University Hospitals NHS Foundation Trust X University Hospitals Coventry and Warwickshire NHS Trust X University Hospitals of Morecambe Bay NHS Foundation Trust X Wrightinton, WIgan and Leigh NHS Foundation Trust X Buckinghamshire Healthcare NHS Trust Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 81

84 healthcare Designed with healthcare environments in mind, the AquariTherm TM tap meets the needs of challenging infection control environments alongside those of FM teams. NeW aquaritherm Tm TaP Designed with healthcare environments in mind, the AquariTherm collection combines infection control features, simple isolation for quick and easy servicing and a stylish aesthetic, meeting the needs of healthcare professionals and technical support staff. The patented* isolation feature allows the tap to be removed from the wall without the removal of panels, and exchanged with a spare tap to ensure that tap stations are always functional, as well as reducing ward-based service times for facilities teams. The easy to access in-line filter and thermostatic mixing valve can then be serviced quickly and easily away from the ward with minimal disruption. at No-touch AquariTherm As well as unique servicing features, the AquariTherm tap is designed for easy day-to-day cleaning and use. The AquariTherm tap is available in either automatic or manual specification, making it ideal for a range of healthcare applications. The automatic specification offers a no-touch solution, incorporating an ergonomic integrated downward facing sensor with adjustable range as well as an automatic purge facility. Both the manual and automatic models include a mechanism to ensure that any hot water is mixed before being delivered to the users hands, ensuring that there is no hot spike effect when placing hands under the tap. Additionally, the tap body stays cool during use, even with prolonged hot running water. Features X No-touch or manual operation models available X Ergonomic, easy to clean surfaces X Quick and easy to service in location X Surface area remains cool X Simple filter exchange and cleaning X Adjustable sensing range X Automatic purge facility Manual X HTM 64 Compliant X Tap body DZR Brass X Ergonomic with easy clean surfaces X Tap handle positioned further from the wall than other healthcare taps X Quick and easy to service X No hot surface area X Easy removable filters & check valves for servicing No-Touch mt Manual AquariTherm X HTM 64 Compliant X Tap body DZR Brass X Ergonomic with easy clean surfaces X Quick and easy to service X No touch operation X No hot surface area X Adjustable sensing range X Easy removable filters & check valves for servicing X Downward facing sensor X Automatic purge facility built in X Reduced hot spikes X Chlorination setting *Patent Pending 82 Dart Valley systems t: f: e: sales@dartvalley.co.uk w:

85 hands-off approach To healthcare healthcare There are cost-effective solutions that can make significant contributions to improving hygiene and also reducing water consumption. A major proportion of avoidable hospital-acquired infections are transferred to the patient via the hands of carers. The two most important aspects of improving hand hygiene are to increase the frequency and improve the effectiveness of hand washing. No-touch taps will help to achieve both of these objectives. Dr Peter Wilson, Consultant Microbiologist, University College Hospital, London, said: Traditionally, elbow-operated taps have been used, but some dexterity is often needed to use them properly. Many still operate taps with fingers, risking spread of pathogens. An innovative solution is the use of infrared operated taps. No physical contact with the tap is then needed and recontamination is avoided. Provided they are reliable, these should reduce cross-infection, particularly in the intensive care unit. The Health Building Note (Number 57) recommends that these taps be installed in all intensive care units. James Paget University Hospitals NHS Foundation Trust is one of the hospitals that has recognised the benefits, and has now installed over 600 no-touch taps. The initiative has been keenly supported by the infection-control team, and Linda Hawtin, Clinical Specialist - Infection Control, stated: From an infection-control perspective, the taps are excellent because they reduce the risk of hand contamination after washing, and they are quick to use because the water is warm immediately, therefore encouraging staff to wash their hands more often. DVS no-touch surgeon taps (Ref: AT02-053) surgeons scrub-up TroUGhs Features include: X Hygienic and vandal resistant design X Concealed pipework X Constructed from 316 stainless steel X Single, 2 or 3 station designs X Specifically designed and developed for use with DVS surgeons scrub-up automatic taps X Pre-drilled holes for mounting taps (optional) ac Single station surgeons scrub-up trough ac station surgeons scrub-up trough ac station surgeons scrub-up trough Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 83

86 healthcare The Aquarius range of taps are manufactured from stainless steel, and with a solid 38mm stainless steel ingot for the head assembly. clinical automatic TaPs Aquarius WM Straight Tap With its modern and simple design, the Aquarius Wall Mount tap ensures the ultimate in hygiene for the most discerning of clients. Surgeons Scrub-Up The Surgeons Scrub-Up tap is based on the Aquarius WM tap but has additional features designed specifically for surgeons scrub-up areas. AquariTherm TM X No-touch or manual operation models available X Ergonomic, easy to clean surfaces X Quick and easy to service in location X Surface area remains cool X Simple filter exchange and cleaning X Adjustable sensing range X Automatic purge facility The tap has a longer reach and is pre-programmed to provide a longer sensing range and run-on time, meaning that surgeons can wash their hands and forearms easier and for longer. This tap is available in three lengths, 150mm, 200mm and 250mm. Aquarius High Neck The Aquarius High Neck offers a clinical deck mounted solution for hand wash or scrub-up. With its extra high body and long reach design the Aquarius High Neck makes it easier for surgeons and hospital staff to wash their hands and forearms. Its simple but unique design also makes it exceptionally easy to clean. Aquarius WM Filter Tap There may be certain high risk areas where point of use filters may be considered. DVS have specially designed this automatic tap to accept point-of-use filters. Disposable water filters for taps protect against Legionella and other bacteria in the water supply. The validated 0.2 µm filter membrane protects against Legionella spp, which are known contaminants of hospital water supplies and can lead to nosocomial infections. at WM straight - Brushed 200mm at High Neck - Brushed at Surgeons scrub-up - Brushed 250mm at Aquarius WM with point-of-use filter - Brushed 250mm Filter features: X Quick connection X Instant protection X Validated 0.2 µm filter membrane X Individually tested X Pre-sterilised - Ready to use at No-touch AquariTherm! Notes: Copper tails for taps can be provided if preferred to fl exible connections. 84 Dart Valley systems t: f: e: sales@dartvalley.co.uk w:

87 PURGE CONTROLLER maintaining GooD WaTer QUaLiTY Automatic Tap Purge Controller* The automatic tap purge controller reduces maintenance and the risk of Legionella by purging the taps if they have not been operated for a predefined time. healthcare Purge run times are adjustable and delay can be set to detect non-use between 6 hours and 15 days. Purge can be set between 5 seconds and 5 minutes. A periodic purge can be switched on or off. at Automatic tap purge controller Special features: X Simple to set up X Saves manually running taps X Readout monitors operations X Easy to use X Avoids stagnation X Overcomes human error PURGE CONTROLLER With Bushboard modules the purge controller can be situated out of sight and also easily accessed for timing adjustments if necessary. *This unit is for pre 2012 taps only. All new DVS taps have a built in purge feature. ready PLUmBeD modules The factory built aluminium frames are engineered to provide the maximum rigidity. Access panels, sanitaryware**, cisterns and pipework are factory assembled and pressure tested prior to delivery direct to site, ensuring quality and speedy on site installation. Fittings Lift off, push fit and hinged concealed fixings provide access for all panel specifications and ensure RPM is hygienic and easy to maintain. Plumbing A choice of traditional copper, or plastic compression fit systems is available. Both systems are dry pressure tested after assembly. Twyford Bushboard DVS have teamed up with specialists Twyford to help provide an easier all-round solution to purchasing complete washroom suites. *Research carried out by QMP, an independent partnership of surveyors, architects and designers. Typical washroom layout based on the New Metric Handbook. Rates obtained from Laxtons 2003 and Spons **WCs are supplied loose for onsite fixing. The combination of Twyford Bushboard and DVS products ensure the client obtains optimum solutions from a single source, with technical specialist support for all of the products. Boxed out ready plumbed units are ideal for retro-fitting handwash stations. Ready Plumbed Modules (RPM) create new standards in washroom quality and design. Independent research comparing traditional construction methods and RPM indicate potential cost savings of up to 20% on complete installation and a reduction in installation time of 75%.* Cabling and plumbing for DVS automatic taps and WCs can be safely hidden away and easily accessed with ready plumbed modules Dart Valley systems t: f: e: sales@dartvalley.co.uk w: 85

88 Healthcare Dimensions SCRUB-UP TROUGHS AC Scrub-up trough - 3 station - Stainless steel AC Scrub-up trough - 2 station - Stainless steel AC Scrub-up trough - Single station - Stainless steel Please note: Illustrations not to scale 86 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

89 38 Dimensions Healthcare clinical automatic taps and purge CONTROLLERS / / AT Aquarius WM filter tap Fixing: 3/4 BSP (28mmø clearance drill hole) Filter and adaptor at extra cost AT Aquarius WM Straight tap Fixing: 3/4 BSP (28mmø clearance drill hole) AT Aquarius High Neck tap Fixing: 3/4 BSP (28mmø clearance drill hole) MT Manual AquariTherm tap Fixing: 1 1/2 BSP (50mmø clearance drill hole) AT AquariTherm tap Fixing: 1 1/2 BSP (50mmø clearance drill hole) 500* AT Pex hose AT Purge controller Please note: Illustrations not to scale Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 87

90 Healthcare HEALTHCARE Important Note Scrub taps have 20 seconds factory-set run-on time. These can be adjusted during manufacture, or post-installation using a hand-held controller. Please call our team on for further details. Clinical Automatic Taps Profile (Not to scale) Code Description AT AT AT AT AT AT AT AT AT AT MT Aquarius WM straight tap spout only in S/St 150mm Aquarius WM straight tap spout only in S/St 200mm Aquarius WM straight tap spout only in S/St 250mm! Notes: Wall mounted. Standard finish is brushed stainless steel. Approx 200mm sensitivity range. Aquarius WM straight tap spout only in S/St 200mm filter Aquarius WM straight tap spout only in S/St 250mm filter PAL filter for use with Aquarius WM filter tap Adaptor for PAL filters! Notes: Wall mounted. Standard finish is brushed stainless steel. Tap does not include filter or adaptor.! Notes: Above taps 230 o/a length. 280 o/a length for surgeons scrub also available Automatic AquariTherm spout only AquariTherm Std Mains Kit for 1-6 bar for use with automatic spout only AquariTherm Std Battery Kit for 1-6 bar for use with automatic spout only Manual AquariTherm spout only Tap Options Code AT AT AT AT AT AT AT AT Description Single station battery kit standard pressure Single station mains kit standard pressure Two station mains kit standard pressure Three station mains kit standard pressure Single station battery kit low pressure Single station mains kit low pressure Two station mains kit low pressure Three station mains kit low pressure For alternative Automatic Taps please refer to page 22 Profile (Not to scale) Description Aquarius WM straight tap - all lengths available! Notes: Wall mounted. Available in brushed or polished finish. Aquarius High Neck tap! Notes: Deck mounted. Available in brushed or polished finish. 88 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

91 HEALTHCARE Healthcare Ready Plumbed Modules Profile (Not to scale) Code Description ON APPLICATION ON APPLICATION Short unit with shelf, automatic tap and basin Full height unit with automatic tap and basin! Notes: Ready plumbed modules are ideal for retro-fitting handwash stations. For special heights or hinged doors etc please contact our sales team for options. Also available with tap spout and wave-on sensors for warm and cold water. Purge Controllers Profile (Not to scale) Code Description AT Automatic tap purge controller Scrub-Up Troughs Profile (Not to scale) Code Description AC AC AC AC Stainless steel scrub-up trough - Single station - Troughs only Stainless steel scrub-up trough - 2 station - Troughs only Stainless steel scrub-up trough - 3 station - Troughs only! Notes: Pre-drilled holes for taps are optional, please specify Thermostatic mixing valve 4in1-15/22mm 89

92 Healthcare HEALTHCARE Patient Ensuite Package 5 (excl. shower) Ensuite package 5 includes all of the individual items listed below except non-standard fixing lengths and optional extras. If longer fixing threads are required please specify. Fixing threads are available for 150mm, 200mm and 300mm wall thickness. Ensuite Package 5 - Patient (excl. shower) Description Complete Patient Ensuite Package 5 (excluding shower) - Standard! Notes: Includes standard Twyford fixing kits suitable for IPS panels. Excludes optional extras. Package Breakdown - Individual Items Code SW SW SW SW AT VR WC AC Description Twyford Avalon ceramic WC pan (Includes fixings) Twyford Avalon - Seat and cover only Twyford Sola Spectrum 500 ceramic basin Twyford Sola Spectrum 500 basin fixing kit Aquarius WM tap spout with no electronics (200mm) Washroom control system kit - For when DVS high security backplates are not being used Concealed tall cistern kit (2 ) DVS thermostatic mixing valve (for basin) Fixings and Extensions (Not included in the standard package) Code AC AC AC Description Sensor thread extension for 100mm wall thickness (for WC sensor, showerhead or shower sensor) Sensor thread extension for 150mm wall thickness (for WC sensor, showerhead or shower sensor) Sensor thread extension for 250mm wall thickness (for WC sensor, showerhead or shower sensor)! Notes: When ordering sensor extensions please specify for use with WC sensor. Options Code VR AC Description High security mirror with white moulded frame Key switch for re-setting lock-outs (for Washroom Control System) Dashed Outline = Low Risk Twyford Sanitaryware 90 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

93 HEALTHCARE Healthcare Patient Ensuite Package 6 (incl. shower) Ensuite package 6 includes all of the individual items listed below except non-standard fixing lengths and optional extras. If longer fixing threads are required please specify. Fixing threads are available for 150mm, 200mm and 300mm wall thickness.! Please Note: Fixing extensions for showerhead and sensor need to be specified below separately due to possible variations in wall thicknesses across installation locations. Ensuite Package 6 - Patient (incl. shower) Description Complete Patient Ensuite Package 6 (including shower) - Standard! Notes: Includes standard Twyford fixing kits suitable for IPS panels. Excludes optional extras. Package Breakdown - Individual Items Code SW SW SW SW SW VR WC AC SH SH AC Description Twyford Avalon ceramic WC pan (Includes fixings) Twyford Avalon - Seat and cover only Twyford Sola Spectrum 500 ceramic basin Twyford Sola Spectrum 500 basin fixing kit Aquarius WM tap spout with no electronics (200mm) Washroom control system kit - For when DVS high security backplates are not being used Concealed tall cistern kit (2 ) TMV3 thermostatic mixing valve x 2 (1 for basin and 1 for showerhead) Showerhead with rail and handset Anti-vandal shower sensor for showerhead Solenoid valve for showerhead Fixings and Extensions (Not included in the standard package) Code AC AC AC Description Sensor thread extension for 100mm wall thickness (for WC sensor, showerhead or shower sensor) Sensor thread extension for 150mm wall thickness (for WC sensor, showerhead or shower sensor) Sensor thread extension for 250mm wall thickness (for WC sensor, showerhead or shower sensor)! Notes: When ordering sensor extensions please specify for use with WC sensor. Options Code VR SH AC Description High security mirror with white moulded frame High security ceiling showerhead Key switch for re-setting lock-outs (for Washroom Control System) Dashed Outline = Low Risk Twyford Sanitaryware Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 91

94 Accessories ACCESSORIES & OTHER PRODUCTS From the advanced 4in1 Thermostatic mixing valve to pressure and flow regulating valves, DVS offers a range of high quality valve options to compliment your washroom installation. TMV3 Thermostatic Mixing Valves A highly advanced TMV3 approved thermostatic mixing valve for use in basin, shower, bidet and high pressure bathfill applications (above 1 bar). The valve is designed to control the mixed water outlet temperature to within +/- 2 C regardless of fluctuations in the temperature and pressure of the hot and cold water supplies. The valve will also shut the mixed water outlet instantly in case of hot or cold water failure (Supply conditions must remain within limits stated). AC in1 DVS Thermostatic Mixing Valve It incorporates a unique purpose-built adjuster key so that standard tools cannot be used by unauthorised persons to change the set outlet temperature. Disclaimer: All valves should be commissioned after installation Features include: X Fully approved by WRAS under the TMV3 scheme to the DO8 specification for basin, shower, bidet, and high pressure bath fill applications X Rapid thermostatic failsafe on either cold or hot supply failure protects the user from extreme temperature dangers X Unique temperature adjuster tool prevents unauthorised tampering X Provides extreme mixed water temperature stability under changing supply conditions X Available in a vast selection of connection formats, including standard 15 and 22mm compression, and 15/22mm universal compression Specifications X Factory temperature setting: C X Temperature setting range: C X Temperature, hot supply: C X Temperature, cold supply: 5-20 C X Minimum hot to mix differential temperature: 10 C X Temperature stability: +/- 2 C X Working pressure, static: 16 bar max X Working pressure: X Maximum pressure loss ratio: 10:1 X Flow rate, minimum: 4 lpm X Flow 1 bar pressure loss: 21 lpm 92 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

95 Dimensions Accessories VALVES AND VALVE ACCESSORIES AC in1 Thermostatic mixing valve - 15/22mm B SH Temperature blending valve - 15mm AC Standard 12.7mm solenoid valve AC Standard plastic solenoid valve AC Y Strainer compression - 15mm (Commonly used with DVS automatic taps) - 15mm (Commonly used with showers and DVS high security backplates) - 15mm AC Restrictaflow valve - 15mm AC and AC Pressure regulator Available in 15mm or 22mm AC mm Isolating valve - 15mm Dart Valley Systems t: f: e: sales@dartvalley.co.uk w: 93

96 B Accessories ACCESSORIES & OTHER PRODUCTS Valves and Valve Accessories Profile (Not to scale) Code Description AC AC Thermostatic mixing valve 2in1-15/22mm Thermostatic mixing valve 4in1-15/22mm! Notes: Thermostatic mixing valves come with both 15mm and 22mm connections. SH Temperature blending valve - 15mm! Notes: Should only be used where safety thermostatic mixing valves are considered unnecessary. AC Restrictaflow in-line flow restricting valve - 15mm AC Isolating valve - 15mm AC Standard Y-strainer compression - 15mm AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC Standard latching valves 6v DC ASCO valve (H262601BW) 1.2mm orifice BAR - 15mm 6v DC ASCO valve (H262602BW) 2mm orifice BAR - 15mm 6v DC ASCO valve (H262603BW) 3.2mm orifice BAR - 15mm 6v DC ASCO valve (H262604BW) 4mm orifice BAR - 15mm 6v DC ASCO valve (H262605BW) 6.7mm orifice BAR - 15mm 6v DC ASCO valve (SCXH210G202BW) 12.7mm orifice BAR - 15mm Special applications Please note: The Tap, Urinal, Shower and Bath range of control systems all use 3W coils 12v DC Normally closed ASCO valve 4mm orifice - 3W BAR - 15mm 12v DC Normally closed ASCO valve 7.1mm orifice - 3W BAR - 15mm 12v DC Normally closed low pressure high flow ASCO valve - 3W BAR - 15/22mm 6v DC Low pressure high flow ASCO valve - Latching BAR - 15/22mm 6v DC ASCO valve 19mm orifice - Latching BAR - 22mm 6v DC Normally closed ASCO valve 15mm orifice BAR - 15mm 12v DC Normally closed ASCO valve 22mm orifice BAR - 3/4" BSP ASCO Valve latcher! Notes: Enables manual operation of solenoid valve without requiring urinal control. Useful for testing or commissioning purposes. 12v DC Plastic valve - Normally closed - For mains powered units! Notes: 15mm. 3m wire and spade connectors incl. WC WRAS approved side entry valve - Individual WC Delayed fill float valve Individual AC AC Port push fit manifold - 3/4" x 15mm - Red 2 Port push fit manifold - 3/4" x 15mm - Blue! Notes: Inlet: 3/4" BSP. Outlet: 15mm push fit. AC AC Pressure regulator - 15mm Pressure regulator - 22mm 94 Dart Valley Systems t: f: e: sales@dartvalley.co.uk w:

97 NOTES Notes Dart Valley Systems t: f: e: w: 95

98 additional information additional information Installation + Servicing An experienced team of regionally based service and installation engineers allows us to offer our customers the highest standard of installation, alongside comprehensive after sales service, including commissioning. For more information on our installation and support services or to request a visit from one of our engineers, please contact our dedicated service team on or sales@dartvalley.co.uk Warranty Information The majority of DVS products are covered by a 2 year warranty (subject to normal usage). For full warranty details please contact our customer service team. Terms + Conditions of sale Products are sold against DVS s standard terms and conditions of sale. A full set of terms and conditions can be obtained from our customer service team. Dart Valley Systems reserves the right to make changes to the specifications of products shown in this catalogue as part of our continuous product development programme. Price list information Where products are supplied as kits, these generally include all main specialist components required. Standard plumbing and electrical parts such as pipes, mains wires, stop cocks, filters or spurs etc are not included except where stated. For more information on Dart Valley Systems, including product information and case studies, please visit 96 Dart Valley systems t: f: e: sales@dartvalley.co.uk w:

99 Dart Valley Systems