WC-Unit. Assembly instructions I00128_NOV 16

Transcription

1 IföSign 6861 WC-Unit 6861 Assembly instructions I00128_NOV 16

2 Ifo Sign Toilet Increased Height - S Trap Free standing toilet with 460mm seat height for those who cannot easily sit down or stand up - especially for hip and knee support. IFO6861 FEATURES 460 mm seat height (excluding seat) 95O cistern to pan angle Cistern complies with all angles thrust test of 1100 N Pan load rated to 400 kg Chromed flush button for improved visibility Seamless cistern as back and side transfer support Increased foot print for enhanced stability Allows for undisturbed coving seal Tested to comply with 90% of AU commonly used commode chairs WELS 4 star rated (4.5/3L Flush) Fully glazed on back and inside rim to avoid bacteria growth Integrated cistern is a deemed-to-satisfy solution which serves as a backrest on the accessible toilet as required in AS Provides 100% consistency and reliability as combined WC and back support. *Seat not included All pans are to be fixed using high grade anti-bacterial silicone of appropriate colour. Where exposed mounting holes are provided, 316 stainless steel screws are to be used. Raised Height Button and Pressalit Care Toilet Seats & Support Arms shown here are not supplied Product Code as standard, but can IFO6861 IFO Increased Height Toilet - S Trap be ordered separately - see options OPTIONS Raised Flush Button Pressalit Hard Seat - white Pressalit Sign Soft Close Seat - white Pressalit Sign Hard Seat No Lid - white Pressalit Sign Hard Seat - anthracite grey Pressalit Sign Hard Seat - white Arm Supports Fresh Sticks - 10 packets of 5 sticks Floor Anchor IFO98308 IFO724D55999 IFO DO39999 IFO BD1999 IFO BD1999 IFO BD1999 IFO98125 IFO94568 IFO98015 Back View Back View Side View Side View Ø102 * For set-out information including AS1428 and corner positioning please refer to our installation instructions. 100 Min.* AS WMKA21026 IAPMO R&T Certifikate Nr SKM-AE-825 ISO 14001:2004 Certifikate Nr SKM-AQ-2054 ISO 9001:2000 Version: Sep 15 Call Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: Fax:

3 Ifo Toilet - S Trap - WC Set Out set out in accordance with AS : Distance from finished wall to front of pan Distance from finished wall to back of pan 800mm 130mm Distance from finished wall to centre of outlet 200mm Min 200 Finished wall Finished wall surface Ø 100 DWV 45 Corner Set up with no arm support system 200 Finished Floor 280 Min. 280 Min. 775 Institutional/Health set out Set out typical for hospitals which allows for substantial air circulation and free coving Finished wall surface Distance from finished wall to front of pan 775mm Distance from finished wall to back of pan Distance from finished wall to centre of outlet 100mm 170mm 45 Corner Set up with arm support system Min 170 Finished wall Finished Floor Ø 100 DWV 700 Minimum set out The minimum to still allow air circulation behind the WC pan Distance from finished wall to front of pan 700mm Distance from finished wall to back of pan Distance from finished wall to centre of outlet 30mm 100mm Min 100 Finished wall Finished Floor Ø 100 DWV Version: Jan 16 Call Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: Fax:

4 Ifo Sign Toilet Increased Height S Trap AS1428.1:2009 White freestanding toilet with 460mm seat height, with cistern as resevior and backrest. FEATURES Free Standing WC 460 mm seat height (excluding seat) 800 mm finished wall to front of pan (based on 200 mm off set) 95 degree cistern to pan angle Cistern complies with all angles thrust test (for AS1428.1:2009) of 1100 N for backrest requirements Integrated cistern is a deemed-to-satisfy solution which serves as a backrest on the accessible toilet as required in AS Pan load rated to 400 kg Seamless cistern offering back and side transfer support Increased foot print for enhanced stability Allows for undisturbed coving seal Tested to comply with 90% of commonly used Australian shower commode chairs WELS 4 star rated (4.5/3L Flush) Fully glazed on back and inside rim to avoid bacteria growth Patented Fresh WC blue stick technology enabled for increased infection control All pans are to be fixed using high grade anti-bacterial silicone of appropriate colour and where exposed mounting holes are provided, 316 stainless steel screws are to be used Provides 100% consistency and reliability as combined wc and back support - no additional backrest needed to meet requirements of AS1428.1:2009** IFO6861 ** Refer to AS1428.1:2009 for height and spacial requirements *Seat not included Product Code IFO IFO - Toilet AS1428.1:2009 set up - S Trap Images show Rasied Height Button and Pressalit Sign Toilet Seat with Lid - these are not supplied as standard, but can be ordered separately - see options. OPTIONS Pressalit Sign Seat with Lid - anthracite grey IFO Sign Raised Flush Button Floor Anchor Fresh Sticks - 10 packets of 5 sticks IFO BD1999 IFO98308 IFO98015 IFO94568 Version: Sep 15 Call Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: Fax: AS WMKA21026 IAPMO R&T Certifikate Nr SKM-AE-825 ISO 14001:2004 Certifikate Nr SKM-AQ-2054 ISO 9001:2000

5 Ifo Sign Toilet Increased Height S Trap AS1428.1:2009 IFO6861 Back View Back View 360 Side View Side View 800* Ø102 * For set-out information including AS1428 and corner positioning please refer to our installation instructions. 200* 1100 N all angles thrust test compliant 400 kg load rating compliant 200 Finished wall Finished Floor Ø 100mm DWV * for more details on the set out, refer to separate document Ifo WC Set Out TDS Version: Sep 15 Call Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: Fax:

6 Thank you for choosing Ifö Sign. You have chosen an environmentally friendly, easy to clean and elegantly designed WC unit. To guarantee correct and reliable installation of this product we urge you to follow the installation instructions. Enware cannot accept liability for damage that occurs as a result of faulty installation. Ifö Sign 6860, 6861 You have chosen the optimum standard WC unit with built-in S-trap. It can usually be installed as quickly and easily, and in the same situations, as WC units with traditional open S-traps. Aavailable as an option: Waterproof Floor Mounting WC connections The water connection to the cistern inlet is a 1/2" BSP male. Looking from the front of the pan, it is located on the right hand side, on the bottom of cistern. See S-Trap WC Set Out above for connection dimensions and other dimensions on WC unit. Bonding/Siliconing This WC unit is suitable for bonding/siliconing, see images The method applies to installation of WC units using elastic free surface. After pan is levelled, water is connected and pan is visually inspected for any leaks, install the rear cover to plug the inspection hole. Apply silicone sealant underneath the base of the pan and around the perimeter to create a Also apply silicone sealant around the rear cover to create Ensure no gap is left that can let any moisture to get through inside the base of the pan. supplied blind cover plugs (IFO94752) must be used in the screw holes on the WC unit, and sealed with silicone. Do not use the WC before the silicone has cured. Dosing This WC is prepared for the Fresh WC function, with a screw, as illustrated in images Depending on the content of the tablet, it produces a fresh blocks that are suspended from the rim of the bowl, by Ifo Fresh Sticks are available from Enware. Product code IFO packets of 5 sticks. For toilets with Arm Supports (e.g. IFO98125): Due to the extra force applied to the toilet pan by the arm stability. Fixing the toilet pan with only the silicone seal is

7 Ifö Sign 6893, 6894 You get more free floor space with a wall-hung style WC unit. It facilitates easier cleaning of the bathroom floor. 30 Each increment is 1 litre, adjustable from 2-5 litres, or from 2-3 litres for model Flush button Ifo Sign WC units are supplied with: unit by turning it a quarter turn clockwise and then lifting Flush volume - Polished chrome flush button (IFO98303) Optional: Raised Chrome Button (IFO98308) button, cut away the catch on the lever arm as shown in 33 Removal of Flush Button and cistern cover so that the rear catch is installed facing forwards Remove the flush button, cover mounting and cover as illustrated in images Servicing Cistern Components If the WC unit runs - first check that the outlet valve's outlet seal washer is not damaged. If it is, replace the outlet washer (IFO96765), as illustrated in images Then check that the inlet valve closes correctly. If it does not, replace the inlet valve (IFO96766) as illustrated in images The lever arm to the inlet float is normally installed on the lower float setting for optimum water flow. This setting can handle a water pressre of 10 bars. In the event of the WC unit running at high water pressures, the lever arm can be moved to the upper setting and then handles a maximum water pressure of 12 bars. See image 29. Note: Inlet Water Pressure Max. 500 kpa (AS ) Reinstalling Reinstall in reverse order. The screws for the cistern mounting must be tightened alternately to a maximum torque of 2.5 Nm as illustrated in image 35. The cover screw must be tightened to a maximum torque of 1.0 Nm as illustrated in image 37. Maintenance advice and cleaning WC units, bidets and wash basins have a glazed surface. Glazed surfaces are easy to keep clean and are resistant against most chemicals. Clean regularly to prevent cleaning problems. Use normal cleaning agents. Clean regularly to prevent cleaning problems. However, use hot water and soap and wipe dry with a cloth. This is because cleaning agents for porcelain are not intended for chrome parts/plastics and can risk cracking This WC-unit is test approved according to NT VVS 120 If necessary See images Cleaning utensils, which contain abrasive agents, such as wire wool and green scouring pads, must not be used. Strong acids, e.g. hydrochloric acid and sulphuric acid and strong alkalines, e.g. caustic soda should not be used. Dripping taps and running WC units must be repaired immediately. For repair or to purchase spare parts, contact your local plumbing contractor or plumbing centre. For more information, contact Enware. If the toilet is subject to freezing temperatures, the WC, litres of anti-freeze into the water trap and cover evaporation. 10

8 * IMPORTANT NOTE for toilets with Arm Supports (e.g. IFO98125): Due to the extra force applied to the toilet pan by the arm supports, GB / Make sure the surface of the tiles is clean, dry and free from grease After pan is levelled, water is connected and pan is visually inspected for any leaks, install the rear cover to plug the inspection hole. Apply silicone sealant underneath the base of the pan and around the perimeter to create a strong bonding between the pan and the floor. Also apply silicone sealant around the rear cover to create a thorough seal between the rear cover, pan and floor. Ensure no gap is left that can let any moisture to get through inside the base of the pan. If the WC unit is bonded / siliconed to the floor, the supplied blind cover plugs (IFO94752) must be used in the screw holes on the WC unit, and sealed with silicone. Do not use the WC before the silicone has cured. 15

9 Access to Internal Components Dosing Setting Flush Volume Maintenance and Servicing

10

11 Max 12 bar Max 10 bar 2 liter 5 liter liter 1 8 liter 27

12 Max 2,5 Nm Max 1,0 Nm 28

13 Ifö Sign, Sign Fix 6860, 6861, 6862, 6870, 6872, 6873 Part Code IFO98381 x 4 Z 3 (pozidriv) x 4 GB /For simple access to spare parts, save these instructions! tu viegli piekļūt rezerves daļām! Installatør/Installer/ Paigaldaja/ Instaliavo/ Uzstādī tājs Dato/Date/Kuupäev/ Data /Datums

14 Ifo - Toilet Sign Spare Parts IFO98303 Sign Dual Flush Button - Chrome 5 IFO90610 Cistern Cover White - Ceramic Shroud Only 11 IFO98308 Sign Raised Dual Flush Button - Chrome 7 IFO96760 Foam Seal Gasket - cistern / bowl 22 IFO96763 Cover Screw Rod 1 IFO91370 Water Flush Distributor / Spreader 23 IFO96766 Inlet Valve Assembly (Inlet valve body with locking clip, shuttle piston and rubber seal) 12 IFO98949 Cistern Mounting Clip and Screw Kit 30 Sign Toilet Bowl S Trap, white 25 Inlet Pipe Assembly (Inlet tube with spigot end fitting) IFO IFO90536 Sign Toilet Bowl S Trap, white, raised 26 IFO96769 Outlet Valve Assembly 10 IFO90533 Sign Toilet Bowl P Trap, white 27 IFO96765 Outlet Valve Seal (Cistern Seating Washer) 13 IFO90441 Sign Toilet Bowl P Trap, white, raised 28 IFO96771 Inlet Float Unit 16 IFO98015 Floor Mounting for Waterproofing 31 IFO96770 Float Rod Large Flush 17 IFO98381 Pan Screws x 4, White Screw Caps x 4, White Blind Cover Plugs x 4 36 IFO91930 Catch Lever 18 Ifo S-Trap Pan Back Inspection Opening Cover 38 Valve Frame Assembly IFO96199 IFO IFO98951 Inner Cistern - Tank only 21 IFO96759 Inlet pipe assembly (for Sign 6893 Model Only) 15 IFO90000 Inner Cistern Assembly Complete (Incl. Outlet 37 IFO90437 Sign Toilet Bowl white (for Sign 6893 Model Only) 29 IFO91965 Water distributor (for Sign 6893 Model Only) 34 IFO96761 Valve Assembly, Inlet Pipe Assembly, Inlet Valve Assembly. Excludes ceramic shroud, water distributor and flush button) förför 6893/ / Version: Dec 16 Call Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: Fax:

15 NOTES Call

16