SHORTER. LIGHTER. MORE VERSATILE. 1 VALVE 10 TRIM CONFIGURATIONS 4" AND 6" MODEL RCW WATER CONTROL VALVE FOR DRY, PREACTION AND DELUGE APPLICATIONS

Transcription

1 SHORTER. LIGHTER. MORE VERSATILE. " AND 6" MODEL RCW WATER CONTROL VALVE FOR DRY, PREACTION AND DELUGE APPLICATIONS Globe is proud to introduce the new Model RCW Water Control Valve for dry pipe, preaction and deluge applications. It is uniquely engineered to minimize many of the field issues historically seen with hydraulically operated differential-style valves. All system types use one common valve body and its lighter weight and smaller size make it easier and faster to install. 1 VALVE 10 TRIM CONFIGURATIONS One valve comes in 10 different culus-listed/fm-approved trim configurations, lowering your inventory costs. The " and 6" RCW is lighter than any other manufacturer s valve currently on the market. In each trim configuration, it is lighter than other makers versions. The RCW has the shortest end-to-end dimensions of any water control valve on the market. Double-seat design means no additional check valve is needed for preaction systems. Single-bolt clapper seal replacement, easy access to hinge pin and minimal bolts for handhole cover removal make the RCW easier to maintain and inspect. Diaphragm-to-clapper latching mechanism uses our unique, patent-pending roller arm design, offering lower friction loss and ensuring dependable performance unimpeded by corrosion or debris.

2 ONE VALVE. MANY APPLICATIONS. The Globe RCW Water Control Valve and each of its trim options have been engineered to meet the most important needs of both the installer and end user. INSTALLATION As an installer, you need only stock one valve for a variety of different system configurations. The RCW s compact design makes it lighter and shorter in size than any other comparable valve on the market. This makes installation easier and, often, faster. The completed assembly takes up a smaller footprint in the building. The RCW s double-seat design means no additional check valve is required. And you are backed by Globe s renowned customer service and technical support every step of the way. OPERATION The RCW is designed to perform. Its diaphragm-to-clapper mechanism is a unique new design featuring a low-friction roller arm. It uses a positive action spring force to assist movement of the diaphragm away from the clapper when diaphragm chamber water pressure is evacuated. Coupled with the minimal movement of the roller assembly, this results in faster operation on pressure drop and more dependable operation. The robust design allows for free movement of the lever arm assembly, even if debris or corrosion are present. The RCW is a differential latching valve with a convenient external reset knob. Internal inspections and maintenance are easier, thanks to unique features such as one-bolt clapper seal replacement and easy handhole cover removal. And color-coded handles make it easy to identify, at a glance, if trim valves are in their proper positions.

3 Easy access hinge pin External reset Patent-pending low-resistance roller arm The Globe RCW Valve is available pre-trimmed or loose-trimmed in the following system configurations: Dry System Available with Standard or Low Pressure Actuator Optional Accelerator Deluge System Electric Actuation Dry Pilot Actuation Wet Pilot Actuation Single Interlock Preaction System Electric Actuation Dry Pilot Actuation Wet Pilot Actuation Double Interlock Preaction System Electric/Electric Actuation Electric/Pneumatic Actuation - Available with Standard or Low Pressure Actuator Non Interlock Preaction System

4 DRY SYSTEMS Dry pipe sprinkler systems are typically used in unheated areas and other locations exposed to freezing temperatures, where water-filled pipe cannot be used. When set for service, a dry pipe sprinkler system incorporating automatic sprinklers (closed) is pressurized with air or nitrogen. In response to heat from a fire, an operated automatic sprinkler causes a loss of air pressure and permits the dry pipe valve to open. This allows a flow of water into the sprinkler system piping. RCW IN HONOR OF Robert C. Worthington, PE Robert C. Worthington was a pioneer in fire sprinkler system engineering, with a long and successful career before he purchased Globe in Mr. Worthington made a commitment to producing a high-quality product in the U.S. This valve is named in honor of his spirit of innovation and his lifelong dedication to saving lives and protecting property from fire. Dry systems are used in any unheated portion of a building: Warehouses Loading Docks Unheated Attic Spaces Shipping Platforms Cold Storage Parking Garages Outdoor Piers Unheated Attic Spaces Dry Pipe Systems

5 DELUGE SYSTEMS Deluge systems are used for special hazards where there are easily ignitable and fast-burning substances which promote rapid fire development. They are typically used for fire extinguishment, fire control or exposure protection in applications such as: With materials having high rates of heat release Conveyors Water Curtains Fuel Storage Tanks Electrical Transformers Aircraft Hangars Chemical Plants Electric Actuation Dry Pilot Actuation Wet Pilot Actuation SINGLE INTERLOCK PREACTION SYSTEMS Single interlock preaction systems are used in any portion of a building where it is undesirable to have water-filled pipes over the hazard being protected. Such systems typically employ air or nitrogen under pressure, with a supplemental detection system installed in the same area as the sprinkler system. These valves are activated by a single event, an electrical detector activation, an activation of a pilot sprinkler connected to pilot lines under air pressure (dry pilot), or an activation of a pilot sprinkler connected to pilot lines under water pressure (wet pilot). They are commonly used in: Computer Rooms Archives Libraries Document Storage Centers Single Interlock Electric Actuation Single Interlock Dry Pilot Actuation Single Interlock Wet Pilot Actuation

6 DOUBLE INTERLOCK PREACTION SYSTEMS Double interlock preaction systems are used in any portion of a building where flooding or inadvertent discharge of water would be especially damaging. These valves are activated by two separate events: an electric activation plus a sprinkler activation. In the case of Electric/Pneumatic Actuation, a detector activation sends an electrical signal to the release panel, opening a solenoid valve. This event would typically be followed by a sprinkler activation, releasing air pressure in the sprinkler piping, allowing the pneumatic actuator to open, and tripping the RCW valve. In the case of Electric/Electric Actuation, a detector activation will send the first electrical signal to the release panel. The activation of a sprinkler will allow air pressure in the sprinkler piping to escape, activating a low air pressure switch. This sends a second signal to the release panel, which opens the solenoid valve, tripping the RCW valve. They are commonly used in applications such as: Freezers Valuable Archives Critical Document Storage Double Interlock Electric/ Pneumatic Actuation Double Interlock Electric/ Electric Actuation AND DONE! The simplicity and versatility of the Globe RCW make it an excellent choice for every application. With it, it s truly one and done. To learn more about the Globe RCW Water Control Valve, contact your local Globe territory manager, contact our customer service team at (989) or visit globesprinkler.com/rcw.

7 TECHNICAL SPECIFICATIONS Approvals: culus and FM Maximum system working pressure: 300 psi (20.6 bar) Materials of construction: See Table below Take out dimensions (end to end): " (DN100) Valve 13.13" (333,5mm) " (DN100) Valve w/ Model GLR300G 17.66" (8,5mm) 6" (DN150) Valve 1.7" (367,5mm) 6" (DN150) Valve w/ Model GLR300G 19.69" (500mm) Model RCW Cross-Section ITEM DESCRIPTION MATERIAL 1 RCW-2 Body (groove/groove) Ductile Iron 2 Seat Ring Bronze 3 Clapper Bronze Retaining Ring 31 Stainless 5 Retaining Bolt Steel 6 Clapper Facing Disc EPDM B 8 7 Latch Arm Bronze Clapper Latch Bronze 9 Reset Plunger Bronze Push Rod Bronze 11 Roller Stainless 12 Diaphragm Retainer Ductile Iron 13 Diaphragm Rubber Diaphragm Cover Ductile Iron 15 Clapper Hinge Pin Stainless 16 Clapper Hinge Pin Bushing Bronze Hand 27Hole Cover Gasket Rubber 18 Hand Hole Cover Ductile Iron 19 Diaphragm Spring Stainless 20 Reset Bushing Bronze A Cover Bolt Steel B 22 Clapper Latch Hinge Pin Stainless 23 Roller Arm Hinge Pin Stainless 2 Roller Arm Hinge Pin Clip Stainless Reset Plunger Knob Bronze 2 26 Plunger O-Ring Rubber 27 Name Plate Aluminum 28 Return Spring Stainless 1 29 Reset Plunger Spring Stainless 30 Roller Bushing Bronze 31 1/2" NPT Plug Steel Drive Screw Stainless 33 Clapper Latch Bushing Bronze A

8 Technical Support Customer Service Globe Fire Sprinkler Corporation. All Rights Reserved. globesprinkler.com

9 077 Airpark Dr. Standish, MI Technical Support MODEL RCW FLOW CONTROL VALVE GENERAL DESCRIPTION The Globe Model RCW* Water Control Valve is a hydraulically operated external resetting differential latching style valve designed for use where quick-opening and total flooding of sprinkler system piping is desired. It is used as an automatic water control valve in Deluge, Dry Pipe, or Preaction systems, as well as foam-water sprinkler systems. Setting of the Model RCW Valve requires water pressure in the diaphragm chamber provided via a connection from the main water supply from a point upstream of the system main control valve, through a restricted orifice. Water pressure on the diaphragm is transferred to the plunger rod which forces the roller arm mechanism against the clapper, preventing the supply water from entering the sprinkler system piping. Actuation (tripping) of the Model RCW Valve is accomplished by releasing water from downstream of the restricted orifice. Water pressure release can be caused by a variety of types of actuation trim and devices. For example the supply can be fed to a line of wet pilot sprinklers for wet pilot type Deluge or Preaction systems. Other devices which can be used for valve actuation include a dry pilot actuator, or an electric solenoid valve with an associated releasing control panel. TECHNICAL DATA Approvals culus FM Note: When trimmed in accordance with Technical Literature: 1 GFV-205- Deluge System Technical Data Sheet 2 GFV-305- Dry System Technical Data Sheet 3 GFV-00- Single Interlock Preaction Technical Data Sheet GFV-10- Double Interlock Preaction Technical Data Sheet 5 GFV-20- Non Interlock Preaction Technical Data Sheet Maximum System Working Pressure 300 psi (20.6 Bar) Materials of Construction See Figure 1 Friction Loss Information See Figure 2 for Friction Loss Data " (DN100) Valve 13.13" (333,5mm) " (DN100) Valve w/ Model GLR300G 17.66" (8,5mm) 6" (DN150) Valve 1.7" (367,5mm) 6" (DN150) Valve w/ Model GLR300G Note: Take Out Dimensions (End to End) *Patents Pending 19.69" (500mm) MODEL RCW FLOW CONTROL VALVE MAINTENANCE Note: All valves should be carefully inspected, tested, and maintained in accordance with NFPA 25 or other applicable Standard. It is important to ensure a clean water supply free of debris and solid particles such as sand, gravel, or mud. If, during an inspection of a water control valve, sediment or free particles of matter are noted, a further examination of internal valve parts is necessary. All valves should be carefully inspected, tested, and maintained in accordance with NFPA 25 or other applicable Standard. It is important to ensure a clean water supply free of debris and solid particles such as sand, gravel, or mud. If, during an inspection of a water control valve, sediment or free particles of matter are noted, a further examination of internal valve parts is necessary. All deposits should be removed from all operating parts and ports. Vent holes through intermediate chamber should be thoroughly cleaned and flushed with clean water. JUNE 2017 GFV-200 (Formerly H-1) PAGE 1 OF 3

10 FIGURE 1:MODEL RCW MATERIALS OF CONSTRUCTION SECTION A-A SECTION VIEW ISOMETRIC VIEW REV. REVISION REVISION METRIC UNITS SHOWN IN BRACKETS, DUE T MAY BE APPROXIMATE. LIMITS ON 2 PLC. DEC..010 [.3mm]; 3 PLC. DE ITEM DESCRIPTION MAT'L. 1 RCW BODY DI " [100mm] P/N 6" [150mm] P/N SEE ORDERING INFORMATION ITEM DESCRIPTION MAT'L. NOTE: SOME PARTS ARE NOT FIELD SERVICEABLE, CONTACT CUSTOMER SERVICE FOR AVAILABILITY " [100mm] P/N DR.BY: 6" [150mm] P/N 19 CLAPPER BRONZE SCALE: NOT TO SCALE 2 MACHINED SEAT RING BRASS RESET BUSHING BRASS DIAPHRAGM TAPER SPRING CLAPPER RETAINER PLATE HEX HEAD CAP SCREW 1/2-13 X.75 STAINLESS HEX HEAD CAP SCREW, 1/2-13 STEEL IN IN STAINLESS TOP ARM BUSHING BRONZE STAINLESS TOP ARM PIN STAINLESS CLAPPER GASKET EPDM ROLLER ARM PIN STAINLESS ROLLER ARM BRONZE ROLLER PIN E-CLIP STAINLESS RCW CLAPPER LATCH BRONZE RESET PLUNGER KNOB BRONZE RESET PLUNGER BRONZE PLUNGER 0-RING EPDM PUSH ROD BRONZE NAME PLATE STAINLESS ROLLER STAINLESS DRIVE SCREW STEEL DIAPHRAGM RETAINER BRONZE LATCH RETURN SPRING STAINLESS DIAPHRAGM EPDM RESET PLUNGER SPRING STAINLESS DIAPHRAGM COVER DI /2" NPT PIPE PLUG STEEL CLAPPER HINGE PIN STAINLESS ROLLER BUSHING BRONZE CLAPPER HINGE PIN BUSHING BRONZE COVER GASKET EPDM MACHINED HAND HOLE COVER PLUNGER BUSHING 0-RING, #2-01 1/2-13 HEX HEAD CAP SCREW (COVER BOLTS) EPDM STEEL IN IN DI RESET PLUNGER END BRONZE ST FOR A Where difficulty in performance is experienced, the damaged (e.g., foreign matter embedded in the surface), manufacturer or its authorized representative shall the facing should be replaced. If it is dirty, it should be be contacted before any field adjustment is to be cleaned. Compounds which could damage the rubber facing must never be used. made. Clapper Facing. The rubber clapper facing should be Seat Ring. The seat ring should be checked for nicks and checked for wear or damage to determine that it is free of for stones, dirt or other foreign matter lodged in the grooves dirt and other foreign substances. If found to be worn or or holes. It should be cleaned thoroughly. If the seat ring is found to be damaged, valve should be replaced. JUNE 2017 GFV-200 (Formerly H-1) PAGE 2 OF 3

11 FIGURE 2:FRICTION LOSS CURVES " (DN100) 6" (DN150) The approximate friction loss, based on the hazen- williams formula; expressed in equivalent length of pipe with c=120, is as follows: 1 11 Ft (3,35 m) of equivalent length of schedule 0 " (DN100) piping for " (DN100) valve 2 2 Ft (12,8 m) of equivalent length of schedule 0 6" (DN150) piping for 6" (DN150) valve Alarm Line Check Valve. The ¾ check valve connected to the intermediate chamber should be checked for clapper and seat condition. RCW Valve. Main Drain Valve and all controlling valves which are normally closed when the deluge valve is in the set position should be checked to be sure that they are fully closed and not leaking. TESTING / INSTALLATION See appropriate system Technical Literature for Testing and Installation Instructions. ORDERING INFORMATION RCW Water Control Valve (Groove X Groove) Specify: RCW-2 Valve Only (specify valve size), PN inch RCW GxG inch RCW GxG DN 150 (165,1 mm) RCW GXG D GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). 077 Airpark Dr. Standish, MI 8658 Ph Technical Support techservice@globesprinkler.com JUNE 2017 GFV-200 (Formerly H-1) PAGE 3 OF 3