ALARM CHECK VALVE 3", 4" & 6" MODEL H-1 FLANGE/FLANGE 3" & 4" MODEL H-2 GROOVE/GROOVE 3", 4" & 6" MODEL H-3 FLANGE/GROOVE

Size: px
Start display at page:

Download "ALARM CHECK VALVE 3", 4" & 6" MODEL H-1 FLANGE/FLANGE 3" & 4" MODEL H-2 GROOVE/GROOVE 3", 4" & 6" MODEL H-3 FLANGE/GROOVE"

Transcription

1

2 DESCRIPTION AND OPERATION The Globe Model H-1, H-2 and H-3 Alarm Check Valves are used in wet pipe fire sprinkler systems. They primarily serve a dual purpose in that they prevent a reverse flow of water through their bodies (non-return) and also provide for the use of a hydraulic fire alarm which is not dependent upon an electrical power supply for its operation. Through the use of a hydraulic retard chamber a time delay is provided to eliminate potential false alarms caused by fluctuating water supply pressures. Where constant pressure water supplies are used the retard chamber (time delay) is not necessary. By incorporating the use of electrical pressure switches, other supplemental alarms, annunciators etc. may also be used. A unique feature found on the Globe 3", 4" and 6" Alarm Valves is the clapper being hinged to the handhole cover for extreme ease of removal for inspection and service. Globe Model H-1, H-2 and H-3 Alarm Check Valves may be installed in both vertical and horizontal positions and trim can be provided for both variable and constant water supply pressures in either of these positions. The body of the Alarm Check Valve is constructed of high tensile strength cast iron having considerable ductility to reduce damage in field handling. All interior operating parts are machined from highly corrosive-resistant alloys, each having high strength and good wear resistance. Rubber parts are of selective materials which have good abrasive resistance and long life expectancy in terms of resiliency. APPROVALS culus Listed FM Approved LPCB Approved - H1 & H3 NYC - DOB MEA M ALARM CHECK VALVE 3", 4" & 6" MODEL H-1 FLANGE/FLANGE 3" & 4" MODEL H-2 GROOVE/GROOVE 3", 4" & 6" MODEL H-3 FLANGE/GROOVE MODEL H-1 MODEL H-2 TECHNICAL DATA Water Working Pressure Rating psi (12 bars) (see below for more specific rating approvals). 4" Model "H-1" culus Listed with D.I.N. Class 16 flanges has a pressure rating of 16 bars. 4" and 6" Model "H-1" LPCB Approved for a 16 bar pressure rating with DIN Class 16 flanges. Factory tested hydrostatically at twice the rated working pressure. Equivalent feet of pipe: 3" Valve = 12.2 feet, 4" Valve = 9.7 feet, 6" Valve = 17 feet. PHYSICAL DATA MODEL H-3 3" 4" 6" 3" 4" 3" 4" 6" Overall Length 9" 9" 10" 10" 10" 9¼" 9½" 11" Weight of Vavle Complete with Verticle Variable Pressure Trimmings MODEL / SIZE H-1 H-2 H-3 34 lbs. 42 lbs. 69 lbs. 20 lbs. 22 lbs. 28 lbs. 37 lbs. 59 lbs. 81 lbs. 89 lbs. 114 lbs. 57 lbs. 69 lbs. 75 lbs. 84 lbs. 100 lbs. AUGUST 2007 C-1 BULLETIN ACV, REV. #6

3 ALARM CHECK VALVE 3", 4" & 6" MODEL H-1 FLANGE/FLANGE 3" & 4" MODEL H-2 GROOVE/GROOVE 3", 4" & 6" MODEL H-3 FLANGE/GROOVE MODEL H-1 CROSS SECTIONS LEFT SIDE VIEW TOP VIEW ITEM DESCRIPTION MAT'L 3" P/N 4" P/N 6" P/N ITEM DESCRIPTION MAT'L 3" P/N 4" P/N 6" P/N 1 Body - H-1 Cast Iron Clapper Facing Disc EPDM Body H-2 Cast Iron Disc Retainer Stainless Body - H-3 Cast Iron Lock Nut Stainless Cover Bolt Steel Disc Retainer Bolt Stainless Seat Ring Bronze Sealing Washer Hard Fiber Cover Cast Iron Hinge Pin Bushing Bronze Clapper Stainless Name Plate Aluminum Retaining Ring Stainless Drive Screw Stainless Hinge Pin Stainless Torsion Spring Stainless Cover Gasket Vellumoid Spring Bushing Brass Refer to Globe's Alarm Check Valve Installation and Maintenance Guide (Bulletin A.C.V.I.M.) for trim set-up, installation instructions, and maintenance. ORDERING INFORMATION SPECIFY Quantity Model Number Size Factory Trimmed and Leak Tested Hydrostatically or Loose Trim for Customer Installation. GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). AUGUST 2007 PRINTED U.S.A BULLETIN ACV, REV. #6

4 CONCEALED EXTENDED COVERAGE FOR LIGHT HAZARD OCCUPANCIES DESCRIPTION AND OPERATION The Globe Quick Response GL5613 and GL8113 Extended Coverage Horizontal Sidewall Adjustable Concealed Sprinkler for light hazard occupancies, have the lowest profile available for this type of sprinkler, providing an aesthetically pleasing design. It provides sprinkler operation approximately six times faster than ordinary sprinklers and can be installed wherever standard concealed spray sprinklers are specified when allowed by the applicable standards, and in accordance with NFPA 13. The sprinkler has 1/2 of adjustment for ease of installation. All that is seen on the wall is a 3 1/4 diameter wall plate color finished to match the specifiers exact requirements. In addition to making the sprinkler much less noticeable, the wall plate assembly also provides protection for the sprinkler from flying or hanging objects. The heart of Globe's Model GL Series sprinkler proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. The 3mm frangible glass ampule provides sprinkler operation approximately six times faster than standard response sprinklers, they can also be installed wherever standard extended coverage horizontal sidewall sprinklers are specified. The wall plate is soldered to the sprinkler s special upper support assembly in three places. Upon the application of sufficient heat, the plate falls to the floor exposing the quick response sprinkler. At the rated temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern. TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Ratings F (57 C) Sprinkler, 135 F (57 C) Cover Plate; 155 F (68 C) Sprinkler, 135 F (57 C) Cover Plate 175 F (79 C) Sprinkler, 155 F (68 C) Cover Plate. Water Working Pressure Rating psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - copper Spring - nickel alloy Seal - teflon Bulb - glass with alcohol based solution, 3mm size. Cover Plate - brass Upper Escutcheon Assembly - steel CONCEALED EXTENDED COVERAGE SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRINKLER TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY 135 F / 155 F 57 C / 68 C ORANGE / RED 100 F 38 C INTERMEDIATE 175 F 79 C YELLOW 100 F 38 C FEBRUARY 2005 A-47 BULLETIN GL5613, REV. #7

5 CONCEALED EXTENDED COVERAGE FOR LIGHT HAZARD OCCUPANCIES SPECIFICATIONS NOMINAL "K" FACTOR THREAD SIZE FINISHES (80 metric) (116 metric) 1/2" NPT 3/4" NPT Bright Chrome White Painted *Satin Chrome *Bright Brass *Other Painted Surfaces STYLE CONCEALED SIDEWALL NOTE: METRIC CONVERSIONS ARE APPROXIMATE. SIN MODEL K FACTOR APPROVALS 135 F (57 C) WITH PLATE 135 F (57 C) 155 F (68 C) WITH PLATE 135 F (57 C) *FINISHES AVAILABLE ON SPECIAL ORDER. 175 F (79 C) WITH PLATE 155 F (68 C) culus NYC - DOB MEA E GL X X X X X GL X X X X X U.L. LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARDS MODEL NO. K-Factor GL GL TEMP. 135 F / 57 C 155 F / 68 C 175 F / 79 C 135 F / 57 C 155 F / 68 C 175 F / 79 C 135 F / 57 C 175 F / 79 C CEILING TO DEFLECTOR DISTANCE 4" TO 6" 6" TO 12" WIDTH OF COVERAGE LENGTH OF COVERAGE MIN. PRESSURE P.S.I. FLOW IN G.P.M. 16' 16' ' 18' ' * 20' ' 16' ' 18' ' * 20' " TO 12" 16' 16' " TO 6" 16' 18' " TO 12" 16' 18' " TO 6" 16' * 20' " TO 12" 16' * 20' * 155 F NOT LISTED IN 16' x 20' ROOM SIZE, USE EITHER 135 F OR 175 F. 7' MINIMUM SPACING FOR GL5613 AND 6' MINIMUM SPACING FOR GL8113. FEBRUARY 2005 CROSS SECTION PRINTED U.S.A. ORDERING INFORMATION SPECIFY Quantity Model Number Style Orifice Temperature Finishes desired Quantity - 5.6K Wrenches - P/N Quantity - 8.1K Wrenches - P/N Quantity - Protective Caps - P/N GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). GLOBE FIRE SPRINKLER CORPORATION BULLETIN GL5613, REV. #7

6 DESCRIPTION AND OPERATION The Globe Quick Response GL5606 Adjustable Concealed Pendent Sprinkler has a low profile, aesthetically pleasing design. It provides sprinkler operation approximately six times faster than ordinary sprinklers and can be installed wherever standard concealed spray sprinklers are specified when allowed by the applicable standards. It offers the additional feature of greatly increased safety to life and should be used advisedly and under the direction of approving authorities having jurisdiction. The sprinkler is available with a nominal 1" of adjustment and a low profile cover plate assembly. The 4 1/2" diameter cover plate allows for 1" clearance around the sprinkler body. The GL Series Concealed Sprinkler may be virtually invisible as it does not interrupt the "smooth flow" of the ceiling. Globe's Concealed Sprinkler utilizes its 3mm frangible glass ampule which is located above the ceiling and concealed from view by the ceiling plate. The provided protective cap needs to be removed in order to install the sprinkler with the proper wrench. The protective cap must be replaced on the sprinkler until the time the cover plate is to be installed. The "push on - screw off" designed cover plate is easily installed and with a nominal 1" inch of adjustment makes it easier to get a proper fit at the ceiling. Operation of the sprinkler occurs when heat build up causes the solder holding the cover plate to the support shell to melt allowing the cover plate to fall clear. Continued heat build up causes the 3mm glass bulb to burst allowing the deflector to drop down and distribute water in an approved pattern to extinguish or control the fire. TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Ratings F (57 C) Sprinkler, 135 F (57 C) Cover Plate; 155 F (68 C) Sprinkler, 135 F (57 C) Cover Plate; 155 F (68 C) Sprinkler, 155 F (68 C) Cover Plate; 175 F (79 C) Sprinkler, 155 F (68 C) Cover Plate; 200 F (93 C) Sprinkler, 155 F (68 C) Cover Plate. Water Working Pressure Rating psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - brass Spring - nickel alloy Seal - teflon Bulb - glass with alcohol based solution, 3mm size. Drop Pin - stainless steel Cover Plate - brass Upper Escutcheon Assembly - plated steel. JANUARY 2009 A-38-EQ 4 1/2" diameter plate WHITE ADJUSTABLE CONCEALED PENDENT NOTE: Globe's wrench P/N must be used to install this sprinkler. SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRINKLER TEMPERATURES "THE INCH" MODEL GL5606 ONE INCH ADJUSTABLE CONCEALED PENDENT WITH COVER PLATE TO MEET IBC CODE FOR SEISMIC AREAS C, D & E BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY 135 F/155 F 57 C/68 C ORANGE/RED 100 F 38 C INTERMEDIATE 175 F/200 F 79 C/93 C YELLOW/GREEN 150 F 66 C (989) BULLETIN GL5606-EQ REV#

7 MODEL GL5606 ADJUSTABLE CONCEALED PENDENT WITH COVER PLATE TO MEET IBC CODE FOR SEISMIC AREAS C, D & E SPECIFICATIONS NOMINAL "K" FACTOR THREAD SIZE LENGTH FINISHES Bright Chrome White Painted 5.6 (80 metric) 1/2" NPT 2 1/2" (6.4 cm) Bright Brass 1 Satin Chrome Other Painted Finishes 1 NOTE: Metric conversions are approximate. 1 Finishes available on special order. APPROVALS STYLE SIN MODEL K FACTOR 135 F (57 C) with plate 135 F (57 C) 155 F (68 C) with plate 135 F (57 C) 155 F (68 C) with plate 155 F (68 C) 175 F (79 C) with plate 155 F (68 C) 200 F (93 C) with plate 155 F (68 C) culus Adjustable Concealed Pendent GL X X X X X X CROSS SECTION WHITE 135 F PART # WHITE 155 F PART # CHROME 135 F PART # CHROME 155 F PART # MIN. CEILING HOLE DIA. ORDERING INFORMATION SPECIFY Quantity Model Number Style Orifice Thread Sizes Temperature Finishes desired Quantity - Adjustable Concealed Wrenches - P/N JANUARY /8" - 4" PRINTED U.S.A. GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List) BULLETIN GL5606-EQ REV#

8 GL SERIES CONCEALED PENDENT DESCRIPTION AND OPERATION The Globe Quick Response GL Series Concealed Pendent Sprinkler is a low profile, aesthetically pleasing design. It provides sprinkler operation approximately six times faster than ordinary sprinklers and can be installed wherever standard concealed spray sprinklers are specified when allowed by the applicable standards. It offers the additional feature of greatly increased safety to life and should be used advisedly and under the direction of approving authorities having jurisdiction. The Sprinkler is available with 1/8" adjustment and a low profile cover plate assembly. All that is seen at the ceiling is a 3 5/16" diameter ceiling plate color finished to match the specifier's exact requirements. The GL Series Concealed Sprinkler may be virtually invisible as it does not interrupt the "smooth flow" of the ceiling. Globe's Concealed Sprinkler utilizes its 3mm frangible glass ampule type sprinkler which is located above the ceiling and concealed from view by the ceiling plate. The ceiling plate is soldered to the sprinkler's special upper support assembly in three places. Upon the application of sufficient heat, the plate falls to the floor exposing the quick response pendent spray sprinkler. At the ampule's rated temperature, the sprinkler opens discharging water onto the floor in its required and approved distribution pattern. A special spring is attached to the pendent sprinkler deflector that serves to provide a constant tension against the ceiling plate. This feature virtually ensures freedom from environmental vibration problems. TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Ratings F (57 C) Sprinkler, 135 F (57 C) Cover Plate; 155 F (68 C) Sprinkler, 135 F (57 C) Cover Plate 175 F (79 C) Sprinkler, 155 F (68 C) Cover Plate; 200 F (93 C) Sprinkler, 155 F (68 C) Cover Plate. Water Working Pressure Rating psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - copper Spring - nickel alloy Seal - teflon Bulb - glass with alcohol based solution, 3mm size. Cover Plate - brass Upper Escutcheon Assembly - steel WHITE CONCEALED PENDENT SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRINKLER TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY 135 F/155 F 57 C/68 C ORANGE/RED 100 F 38 C INTERMEDIATE 175 F/200 F 79 C/93 C YELLOW/GREEN 150 F 66 C (989) DECEMBER 2006 A-32 BULLETIN GL2804, REV. #5

9 GL SERIES CONCEALED PENDENT SPECIFICATIONS NOMINAL "K" FACTOR THREAD SIZE LENGTH FINISHES 2.8 (39 metric) 1/2" NPT Bright Chrome White Painted 4.2 (59 metric) 1/2" NPT 2 1/2" (6.4 cm) Satin Chrome (80 metric) 1/2" NPT Bright Brass 1 Other Painted Finishes 1 NOTE: METRIC CONVERSIONS ARE APPROXIMATE. * FINISHES AVAILABLE ON SPECIAL ORDER. PAINTED PLATES OTHER THAN WHITE REQUIRE CUSTOMER TO FURNISH PAINT. APPROVALS STYLE SIN MODEL K FACTOR 135 F (57 C) WITH PLATE 135 F (57 C) 155 F (68 C) WITH PLATE 135 F (57 C) 175 F (79 C) WITH PLATE 155 F (68 C) 200 F (93 C) WITH PLATE 155 F (68 C) culus LPC CE CONCEALED PENDENT GL X X X X X GL X X X X X GL * X X X X X X X *LISTED FOR ALL HAZARDS. CROSS SECTION ORDERING INFORMATION SPECIFY Quantity Model Number Style Orifice Thread Sizes Temperature Finishes desired Quantity - Concealed Wrenches - P/N Quantity - Protective Caps - P/N GLOBE PRODUCT WARRANTY 1/8" ADJUSTMENT Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List) DECEMBER 2006 PRINTED U.S.A. BULLETIN GL2804, REV. #5

10 GL SERIES DRY TYPE DESCRIPTION AND OPERATION The Globe Quick Response GL Series Dry Type Pendent Sprinkler is designed for use in special applications such as freezing environments and conditions where sediment or foreign materials might accumulate in ordinary drop nipples. The Globe Quick Response GL Series Dry Type Pendent Sprinkler utilizes a 3mm frangible glass ampule as the thermosensitive element. This provides sprinkler operation approximately six times faster than ordinary sprinklers. At the ampule's rated temperature, the sprinkler opens releasing the bulb seat, causing the inner tube assembly to move, allowing the spring assembly to pivot alongside the inner tube. At this time, water flows through the sprinkler and is distributed by the deflector in an approved discharge pattern. It can be installed wherever standard spray sprinklers are specified but offers the additional feature of greatly increased safety to life. Quick Response Sprinklers should be used advisedly and under the direction of approving authorities having jurisdiction. The heart of Globe's Model GL Series sprinkler proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands increasing the internal pressure. At the prescribed temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern. SURFACE MOUNT SLEEVE & SKIRT TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Ratings F (57 C), 155 F (68 C), 175 F (79 C) 200 F (93 C), 286 F (141 C). Water Working Pressure Rating psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - brass Spring - teflon coated nickel alloy Retainer - brass Pin - stainless steel Torsion spring - stainless steel Bulb - glass with alcohol based solution, 3mm Orifice insert - brass 3/4" NPT or 1" NPT Outer tube - galvanized steel pipe Inner tube - stainless steel EXTENDED RECESSED SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION APRIL 2007 AVAILABLE SPRINKLER TEMPERATURES A-55 BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY 135 F/155 F 57 C/68 C ORANGE/RED 100 F 38 C INTERMEDIATE 175 F/200 F 79 C/93 C YELLOW/GREEN 150 F 66 C HIGH 286 F 141 C BLUE 225 F 107 C BULLETIN GL5635, REV.#11

11 GL SERIES DRY TYPE STYLE PENDENT RECESSED PENDENT NOMINAL "K" FACTOR SIN MODEL K FACTOR THREAD SIZE CROSS SECTIONS SPECIFICATIONS 5.6 (80 metric) 3/4" or 1" NPT 8.1 (116 metric) 1" NPT NOTE: Metric conversions are approximate. culus listed corrosion resistant: Polyester must be specified on order. APPROVALS GL " NPT X X X X X X X GL /4" NPT X X X X - X X GL " NPT X X X X - X X GL " NPT X X X X X X X GL /4" NPT X X X X - X X GL " NPT X X X X - X X NOTE: Listed for ALL hazards * Pendent style - FM Approved 155 F, 200 F, and 286 F * Recessed Pendent style - FM Approved 155 F and 200 F 135 F 57 C THREAD SIZE LENGTH FINISHES 155 F 68 C 200 F 93 C culus Variable to 48" FM Variable to 36" 286 F 141 C * FM Factory Bronze Satin Chrome 1 Bright Chrome White Polyester Black Polyester Lead Coated 2 1 Finishes available on special order. 2 Lead Coated is UL approved only. culus NYC-DOB MEA E IMPORTANT INSTALLATION DATA Globe GL Series Dry Pendent sprinklers should be installed in accordance with the requirements set forth in NFPA 13. These sprinklers are to be installed using a pipe wrench applied to the outer tube. When this is not possible, the proper sprinkler head wrench may be used with extreme care for lengths up to approximately 18". Excessive force may distort the frame thus destroying the unit. For further important installation data, please refer to our Dry Sprinkler Caution Sheet. EXTENDED PENDENT PENDENT ORDERING INFORMATION SPECIFY Quantity Model Number Style Orifice Temperature Finishes desired Quantity - Wrenches - P/N Quantity - Recessed Wrenches - P/N Quantity - Protective Caps - P/N CAP (Friction Fit Recessed) Escutcheons desired "A" Dimension - Distance from face of fitting to the finished ceiling line regardless of escutcheon used. RECESSED PENDENT SLEEVE & SKIRT PENDENT GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List) APRIL 2007 PRINTED U.S.A. BULLETIN GL5635, REV. #11

12 EXTENDED COVERAGE MODEL GL5628 DESCRIPTION AND OPERATION The Globe Quick Response Model GL5628 Extended Coverage Horizontal Sidewall Sprinkler is a low profile yet durable design which utilizes a 3mm frangible glass ampule as the thermosensitive element. This provides sprinkler operation approximately six times faster than ordinary sprinklers. While these Quick Response Sprinklers provide an aesthetically pleasing appearance, they can be installed wherever standard extended coverage horizontal sprinklers are specified; but offer the additional feature of greatly increased safety to life. Quick Response Sprinklers should be used advisedly and under the direction of approving authorities having jurisdiction, in accordance with their listings and in accordance with NFPA 13. The heart of Globe's Model GL Series sprinkler proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands increasing the internal pressure. At the prescribed temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern. EXTENDED COVERAGE TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Rating F (57 C), 155 F (68 C), 175 F (79 C) 200 F (79 C). Water Working Pressure Rating psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - copper Spring - nickel alloy Seal - teflon Bulb - glass with alcohol based solution, 3mm size. Escutcheon Assembly - steel RECESSED EXTENDED COVERAGE SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRINKLER TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY INTERMEDIATE 135 F/155 F 175 F/200 F 57 C/68 C 79 C/93 C ORANGE/RED YELLOW/GREEN 100 F 150 F 38 C 66 C MAY 2004 A-44 BULLETIN GL5628, REV. #4

13 AL(FAme)NP(cm)ES EXTENDED COVERAGE MODEL GL5628 SPECIFICATIONS ON"CTORTHREADSIZELENGTHSHFactoryBronze*SatinChromeBrightChrome6tricT26WhitePolyester+BlackPolyester+*LeadCoateNOTE: METRIC CONVERSIONS ARE APPROXIMATE. *FINISHES AVAILABLE ON SPECIAL ORDER. +AVAILABLE AS U.L. AND C-U.L. LISTED CORROSION RESISTANT WHEN SPECIFIED ON ORDER. APPROVALS SIN 135 F 155 F 175 F 200 F NYC-DOB ST YLE K-FACTOR cu Lus MODEL 57 C 68 C 79 C 93 C MEA E SIDEWALL GL X X X X X XNMI"KFINI5.801/2"1/2"7.dU.L. LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARDS MODEL NO. GL5628 MAY 2004 ST YLE St andar d & Recessed St andar d & Recessed T EMP. 135 F / 57 C 155 F / 68 C 175 F / 79 C CROSS SECTIONS CEILING TO DEFLECTOR DISTANCE 4" TO 12" 200 F / 93 C 4" TO 6" WIDTH OF COVERAGE PRINTED U.S.A. LENGTH OF COVERAGE ORDERING INFORMATION SPECIFY Quantity Model Number Style Orifice Temperature Finishes desired Quantity - Standard Wrenches - P/N Quantity - Recessed Wrenches - P/N Quantity - Protective Caps - P/N CAP (Friction Fit Recessed) GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List) MIN. PRESSURE P.S.I. FLOW IN G.P.M. 16' 16' ' 18' ' 18' ' 16' ' 18' ' 18' St andar d & 135 F / 57 C 4" TO 12" 16' 20' Recessed Standard 175 F / 79 C 4" TO 12" 16' 20' MINIMUM 7' SPRINKLER SPACING. 3/4" ADJUSTMENT 1/2" ADJUSTMENT BULLETIN GL5628, REV. #4

14 DESCRIPTION AND OPERATION The Globe Quick Response Models GL8128 and GL8129 Extended Coverage Horizontal Sidewall Sprinklers are a low profile yet durable design which utilizes a 3mm frangible glass ampule as the thermosensitive element. This provides sprinkler operation approximately six times faster than ordinary sprinklers. While this Quick Response Sprinkler provides an aesthetically pleasing appearance, it can be installed wherever standard extended coverage horizontal sprinklers are specified; but offers the additional feature of greatly increased safety to life. Quick Response Sprinklers should be used advisedly and under the direction of approving authorities having jurisdiction, in accordance with their listings and in accordance with NFPA 13. The heart of Globe's Model GL Series sprinkler proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands increasing the internal pressure. At the prescribed temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern depending upon the deflector style used. TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Rating F (57 C), 155 F (68 C), 175 F (79 C) 200 F (93 C). Water Working Pressure Rating psi (1207 kpa). Factory tested hydrostatically to 500 psi (3448 kpa). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - copper Spring - nickel alloy Seal - teflon Bulb - glass with alcohol based solution, 3mm size. Escutcheon Assembly - steel EXTENDED COVERAGE MODELS GL8128, GL8129 EXTENDED COVERAGE RECESSED EXTENDED COVERAGE SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRIN KLER TEMPERATU RES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY 135 F/155 F 57 C/68 C ORANGE/RED 100 F 38 C INTERMEDIATE 175 F/200 F 79 C/93 C YELLOW /GREEN 150 F 66 C OCTOBER 2003 A-46 BULLETIN GL8128, REV. #5

15 EXTENDED COVERAGE MODELS GL8128, GL8129 MODEL NO. GL8128 GL8129 GL8128 GL8129 GL8128 GL8129 GL8128 GL8129 OCTOBER 2003 NOMINAL "K" FACTOR THREAD SIZE LENGTH FINISHES Factory Bronze *Satin Chrome 8.1 (116 metric) 3/4" NPT 3" (7.6 cm) Bright Chrome W hite Polyester+ Black Polyester+ *Lead Coated NOTE: METRIC CONVERSIONS ARE APPROXIMATE. *FINISHES AVAILABLE ON SPECIAL ORDER. +AVAILABLE AS culus LISTED CORROSION RESISTANT WHEN SPECIFIED ON ORDER. ST YLE SID EWALL ST YLE St andar d & Recessed St andar d & Recessed St andar d & Recessed MODEL NO. CROSS SECTIONS SPECIFICATIONS K FACTOR 135 F 57 C APPROVALS 155 F 68 C 175 F 79 C 200 F 93 C culus NYC - DOB MEA E GL X X X X X X GL X X X X X X U.L. LISTIN G DESIGN - USE REQUIREMEN TS FOR LIGH T H AZARDS T EMP. 135 F / 57 C 155 F / 68 C 175 F / 79 C 200 F / 93 C 135 F / 57 C 155 F / 68 C 175 F / 79 C 135 F / 57 C Standard 175 F / 79 C St andar d & Recessed 135 F / 57 C CEILING TO DEFLECTOR DISTANCE WIDTH OF COVERAGE 4" TO 6" 16' 6" TO 12" 16' 4" TO 6" 6" TO 12" 4" TO 6" 6" TO 12" 4" TO 6" 6" TO 12" *LISTED WITH RECESSED CUP WITH 1/2" ADJUSTMENT, MINIMUM 6' SPRINKLER SPACING. LENGTH OF COVERAGE MIN. PRESSURE P.S.I. ORDERING INFORMATION FLOW IN G.P.M. 16' ' ' ' ' 20' ' *22' *24' SPECIFY Quantity Model Number Style Orifice Temperature Finishes desired Quantity - Wrenches - P/N Quantity - Recessed Wrenches - P/N , Rev. D Quantity - Protective Caps - P/N CAP (Friction Fit Recessed) GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List) PRINTED U.S.A. BULLETIN GL8128, REV. #5

16 DESCRIPTION AND OPERATION The Globe Quick Response GL Series Sprinkler is a low profile yet durable design which utilizes a 3mm frangible glass ampule as the thermosensitive element. This provides sprinkler operation approximately six times faster than ordinary sprinklers. While the Quick Response Sprinkler provides an aesthetically pleasing appearance, it can be installed wherever standard spray sprinklers are specified but offers the additional feature of greatly increased safety to life. Quick Response Sprinklers should be used advisedly and under the direction of approving authorities having jurisdiction. The heart of Globe s GL Series sprinkler proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands increasing the internal pressure. At the prescribed temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern depending upon the deflector style used. The sprinkler and escutcheon are not factory assembled. Assembly is done in the field. GL SERIES RECESSED PENDENT RECESSED RECESSED PENDENT TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Ratings F (57 C), 155 F (68 C), 175 F (79 C), 200 F (93 C), 286 F (141 C). Water Working Pressure Rating psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - copper Spring - nickel alloy Seal - teflon Bulb - glass with alcohol based solution, 3mm size. Escutcheon Assembly - steel RECESSED SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRINKLER TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY 135 F/155 F 57 C/68 C ORANGE/RED 100 F 38 C INTERMEDIATE 175 F/200 F 79 C/93 C YELLOW/GREEN 150 F 66 C HIGH 286 F 141 C BLUE 225 F 107 C DECEMBER 2006 A-24 BULLETIN GL2801, REV. #5

17 GL SERIES RECESSED PENDENT RECESSED SPECIFICATIONS NOMINAL "K" FACTOR THREAD SIZE LENGTH 1 FINISHES STYLE 2.8 (39 metric) 1/2" NPT 2 1/4" (5.7 cm) Factory Bronze Satin Chrome 4.2 (59 metric) 1/2" NPT 2 1/4" (5.7 cm) 2 Bright Chrome 5.6 (80 metric) 1/2" NPT 2 1/4" (5.7 cm) White Polyester (111 metric) 1/2" NPT 2 1/4" (5.7 cm) Black Polyester (116 metric) 3/4" NPT 2 7/16" (6.2 cm) Lead Coated 2 NOTE: METRIC CONVERSIONS ARE APPROXIMATE. SIN MODEL K FACTOR 135 F 57 C 155 F 68 C APPROVALS 175 F 79 C 200 F 93 C **286 F 141 C 1 IS 2 9/16". 2 FINISHES AVAILABLE ON SPECIAL ORDER. 3 C-UL LISTED CORROSION RESISTANT - POLYESTER MUST BE SPECIFIED ON ORDER. culus FM LPC CE NYC - DOB MEA E PENDENT RECESSED HORIZONTAL SIDEWALL RECESSED PENDENT GL X X X X X X X GL X X X X X X X GL X X X X X X X X X X GL * X X X X X X X X GL X X X X X X X X X X GL X X X X X X X GL X X X X X X X GL X X X X X X X GL X X X X X X culus LISTED FOR DEFLECTOR 4" TO 12" BELOW THE CEILING. 5.6K ORIFICE, 7.8K ORIFICE AND 8.1K ORIFICE LISTED FOR ALL HAZARDS. * 7.8K X 1/2" NPT. **286 F culus LISTED ONLY. 1/2" RECESSED ESCUTCHEONS ARE REQUIRED FOR FM APPROVED SPRINKLERS. CROSS SECTIONS HORIZONTAL SIDEWALL ORDERING INFORMATION SPECIFY Quantity Model Number Style Orifice Thread Sizes Temperature Finishes desired Quantity - Recessed Wrenches - P/N (1/2"); P/N , Rev. F (L.O.) Quantity - Protective Caps - P/N CAP (Friction Fit Recessed) GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List) DECEMBER 2006 PRINTED U.S.A. BULLETIN GL2801, REV. #5

18 DESCRIPTION AND OPERATION The Globe Quick Response GL Series Sprinklers are a low profile yet durable design which utilizes a 3mm frangible glass ampule as the thermosensitive element. This provides sprinkler operation approximately six times faster than ordinary sprinklers. While the Quick Response Sprinkler provides an aesthetically pleasing appearance, it can be installed wherever standard spray sprinklers are specified when allowed by the applicable standards. It offers the additional feature of greatly increased safety to life and is available in various styles, orifices, temperature ratings and finishes to meet many varying design requirements. Quick Response Sprinklers should be used advisedly and under the direction of approving authorities having jurisdiction. The heart of Globe's GL Series sprinkler proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands increasing the internal pressure. At the prescribed temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern depending upon the deflector style used. The sprinkler and escutcheon are not factory assembled. Assembly is done in the field. TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Ratings F (57 C), 155 F (68 C), 175 F (79 C), 200 F (93 C), 286 F (141 C). Water Working Pressure Rating psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - copper Spring - nickel alloy Seal - teflon Bulb - glass with alcohol based solution, 3mm size. GL SERIES UPRIGHT PENDENT VERTICAL SIDEWALL CONVENTIONAL (OLD STYLE) UPRIGHT CONVENTIONAL PENDENT VERTICAL SIDEWALL SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRINKLER TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY 135 F/155 F 57 C/68 C ORANGE/RED 100 F 38 C INTERMEDIATE 175 F/200 F 79 C/93 C YELLOW/GREEN 150 F 66 C HIGH 286 F 141 C BLUE 225 F 107 C DECEMBER 2006 A-20 BULLETIN GL5615, REV. #6

19 GL SERIES UPRIGHT PENDENT VERTICAL SIDEWALL CONVENTIONAL (OLD STYLE) SPECIFICATIONS NOMINAL "K" FACTOR THREAD SIZE LENGTH 1 FINISHES STYLE UPRIGHT PENDENT 2.8 (39 metric) 1/2" NPT 2 1/4" (5.7 cm) Factory Bronze Satin Chrome 4.2 (59 metric) 1/2" NPT 2 1/4" (5.7 cm) 2 Bright Chrome 5.6 (80 metric) 1/2" NPT 2 1/4" (5.7 cm) White Polyester (111 metric) 1/2" NPT 2 1/4" (5.7 cm) Black Polyester (116 metric) 3/4" NPT 2 7/16" (6.2 cm) Lead Coated 2 NOTE: METRIC CONVERSIONS ARE APPROXIMATE. 1 IS 2 9/16". 2 FINISHES AVAILABLE ON SPECIAL ORDER. 3 AVAILABLE AS culus LISTED CORROSION RESISTANT WHEN SPECIFIED ON ORDER. SIN MODEL K FACTOR 135 F 57 C 155 F 68 C APPROVALS 175 F 79 C 200 F 93 C 286 F 141 C culus F.M. LPC CE NYC - DOB MEA E GL X X X X X X X GL X X X X X X X GL X X X X X X X X X X GL * X X X X X X X X GL X X X X X X X X X X GL X X X X X X X GL X X X X X X X GL X X X X X X X X X X GL * X X X X X X X X GL X X X X X X X X X X VERTICAL SIDEWALL HORIZONTAL SIDEWALL CONVENTIONAL (OLD STYLE) GL X X X X X X X GL X X X X X X GL X X X X X X X GL X X X X X X X GL X X X X X X X X GL X X X X X X GL X X X X X X X --- GL X X X X X X X --- ORDERING INFORMATION SPECIFY Quantity Model Number Style Orifice Thread Sizes Temperature Finishes desired Quantity - Wrenches - P/N (1/2"); P/N (L.O.) culus LISTED FOR DEFLECTOR 4" TO 12" BELOW THE CEILING, FM APPROVED 4" TO 6". VERTICAL SIDEWALL SPRINKLER culus LISTED FOR LIGHT HAZARD ONLY. PENDENT VERTICAL SIDEWALL culus LISTED FOR 6' MIN. SPACING. UPRIGHT VERTICAL SIDEWALL culus LISTED FOR 9' MIN. SPACING. *1/2" NPT. GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List) DECEMBER 2006 PRINTED U.S.A. BULLETIN GL5615, REV. #6

20 SPRINKLER CABINETS FOR REPLACEMENT SIX SPRINKLER CABINET FOR ½" OR ¾" SPRINKLERS P/N TWELVE SPRINKLER CABINET FOR ½" OR ¾" SPRINKLERS P/N When storing concealed sprinklers, Twelve Sprinkler Cabinet holds six units and Six Sprinkler Cabinet holds three units AUGUST 2002 B-5 BULLETIN SPRCAB, REV. #2

Model F1 Model F1 Recessed Standard Response Sprinklers

Model F1 Model F1 Recessed Standard Response Sprinklers The Designer Model F Standard Upright Standard Pendent Extended Coverage Pendent Conventional Vertical Sidewall HSW Deflector Extended Coverage EC-6 Deflector The Designer II Model F Recessed Recessed

More information

mirage standard and Qr concealed pendent sprinkler vk462 and hp sprinkler vk463 (K5.6)

mirage standard and Qr concealed pendent sprinkler vk462 and hp sprinkler vk463 (K5.6) Page 1 of 7 1. DESCRIPTION Viking Mirage Standard and Quick Response Concealed Pendent VK462 and HP VK463 are thermosensitive glass-bulb spray sprinklers designed for installation on concealed pipe systems

More information

Model F1 Res Sprinklers engineered for the lowest flows to meet the minimum design density of.05 gpm/ft 2

Model F1 Res Sprinklers engineered for the lowest flows to meet the minimum design density of.05 gpm/ft 2 Bulletin 15 Rev. M Bulletin 15 Rev. M Model F1 Residential s for Design Density of.05 gpm/ft 2 Model F1 Res s engineered for the lowest flows to meet the minimum design density of.05 gpm/ft 2 Types: 1.

More information

TECHNICAL DATA OBSOLETE

TECHNICAL DATA OBSOLETE April 13, 2007 Spray Nozzle 31a 1. DESCRIPTION Viking Frame Style Spray Nozzles are small, directional spray nozzles for use on water spray systems. They are thermosensitive glass bulb style nozzles, however

More information

FRAME STYLE SPRAY NOZZLES TECHNICAL DATA

FRAME STYLE SPRAY NOZZLES TECHNICAL DATA Page 1 of 5 1. DESCRIPTION Viking Frame Style Spray Nozzles are small, directional spray nozzles for use on water spray systems. They are thermosensitive glass bulb style nozzles, however they may be ordered

More information

Fire Protection Systems

Fire Protection Systems Sprinklers Victaulic Distributor for Fire Sprinker Heads in Pennsylvania, New Jersey 25-256-75 http://www.deaconind.com sales@deaconind.com Victaulic Fire Protection Systems Fire Protection Systems Updated

More information

Easy Riser swing check valve Models E-1 & F-1

Easy Riser swing check valve Models E-1 & F-1 Page 1 of 7 1. DESCRIPTION The Viking Easy Riser Swing Check Valve is a general purpose rubber-faced approved for use in fire service systems. The valve is for use in wet system risers, preaction system

More information

Listings and Approvals. G5 QR Gasket culus QR G5 SR Gasket culus, FM SR G5

Listings and Approvals. G5 QR Gasket culus QR G5 SR Gasket culus, FM SR G5 Model Series Sprinklers Available with Solid, Perforated, or Gasket Standard Coverage, Concealed Pendent K2.8, 4.2, 5.6, & 8.0 (40, 60, 80, & 115 metric) Features Flat concealed cover plate available solid

More information

SHORTER. LIGHTER. MORE VERSATILE. 1 VALVE 10 TRIM CONFIGURATIONS 4" AND 6" MODEL RCW WATER CONTROL VALVE FOR DRY, PREACTION AND DELUGE APPLICATIONS

SHORTER. LIGHTER. MORE VERSATILE. 1 VALVE 10 TRIM CONFIGURATIONS 4 AND 6 MODEL RCW WATER CONTROL VALVE FOR DRY, PREACTION AND DELUGE APPLICATIONS SHORTER. LIGHTER. MORE VERSATILE. " AND 6" MODEL RCW WATER CONTROL VALVE FOR DRY, PREACTION AND DELUGE APPLICATIONS Globe is proud to introduce the new Model RCW Water Control Valve for dry pipe, preaction

More information

TECHNICAL DATA OBSOLETE

TECHNICAL DATA OBSOLETE August 31, 2006 Check Valve 815a 1. PRODUCT NAME Viking Easy Riser Swing Check Valve Model E-1: Available since 1992 Model F-1: Available since 1994 2. MANUFACTURER The Viking Corporation 210 N. Industrial

More information

TECHNICAL DATA SPRINKLER ESCUTCHEONS

TECHNICAL DATA SPRINKLER ESCUTCHEONS Page 1 of 8 1. DESCRIPTION Viking sprinkler escutcheons are ornamental plates used with ½ NPT (15 mm BSP)*, and ¾ NPT (20 mm BSP)* pendent sprinklers. The escutcheons are installed between the sprinklers

More information

One Million Raindrops by Senju Sprinkler. Product Brochure

One Million Raindrops by Senju Sprinkler. Product Brochure One Million Raindrops by Senju Sprinkler Product Brochure Table of Contents Residential Sprinklers Commercial Sprinklers Cover Plate Finishes 3-7 8-10 11 Introduction Company Senju Sprinkler has been manufacturing

More information

model E Spray nozzles vk810 - vk817

model E Spray nozzles vk810 - vk817 Page 1 of 10 1. DESCRIPTION Viking Model E, 3D Spray Nozzles are open type spray nozzles designed for directional spray applications in fixed fire protection systems. They have an open design only (nonautomatic)

More information

Instructions for Installation, Operation, Care and Maintenance

Instructions for Installation, Operation, Care and Maintenance Bulletin 407 Rev. T Model E Alarm Check Valve Bulletin 407 Rev. T Instructions for Installation, Operation, Care and Maintenance 4 (100 mm), 6 (150 mm), 8 (200 mm) Sizes With Model E3 Trim Listed by Underwriters

More information

4077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE FAX

4077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE FAX Butterfly Valves 4077 AIRPARK DRIVE STANDISH, MICHIGAN 48658 PHONE 989-846-4583 FAX 989-846-9231 www.globesprinkler.com FEBRUARY 2010 L-1 BULLETIN BUTTERFLY REV# 4 GLOBE BUTTERFLY VALVE INSTALLATION AND

More information

Instructions for Installation, Operation, Care and Maintenance

Instructions for Installation, Operation, Care and Maintenance Model D Dry Pipe Valve Bulletin 350 Rev. S Bulletin 350 Rev. S Instructions for Installation, Operation, Care and Maintenance 4 (100mm) 6 (150mm) Valve With Model D Trimmings Listed by Underwriters Laboratories,

More information

Price Book - Section 4 Residential Products

Price Book - Section 4 Residential Products Effective Date Price Book - LF II - Low Flow Pendent, Fast Response, K=3.0 1 /2" N.P.T. 100 Box Quantity (Pendent 20 lbs/box (SIN TY1234) 51-010-1-155 LFII Pendent Brass 155 F/68 C $33.50 51-010-1-175

More information

Q= C. v P S Refer to Table 1 for part numbers and shipping weights. Accessories: Table 1: Valve Part Numbers and Specifications

Q= C. v P S Refer to Table 1 for part numbers and shipping weights. Accessories: Table 1: Valve Part Numbers and Specifications 1 of 9 1. DESCRIPTION The Viking Flow Control Valve is a quick opening, differential diaphragm flood valve with a spring loaded floating clapper. The Flow Control Valve can be used to facilitate manual

More information

INSTALLATION & MAINTENANCE GUIDE

INSTALLATION & MAINTENANCE GUIDE BUTTERFLY VALVES INSTALLATION & MAINTENANCE GUIDE L-1 GLOBE BUTTERFLY VALVE INSTALLATION AND MAINTENANCE GUIDE Table of Contents Page Design Requirements and Installation Care and Maintenance GL175T GL175G

More information

Type EA-1 PROTECTOSPRAY Directional Spray Nozzles, Automatic, Medium Velocity General Description

Type EA-1 PROTECTOSPRAY Directional Spray Nozzles, Automatic, Medium Velocity General Description Worldwide Contacts www.tyco-fire.com Type EA-1 PROTECTOSPRAY Directional Spray Nozzles, Automatic, Medium Velocity General Description IMPORTANT Always refer to Technical Data Sheet TFP700 for the INSTALLER

More information

TECHNICAL DATA. model f-1 2. LISTINGS AND APPROVALS 3. TECHNICAL DATA. Page 1 of 11

TECHNICAL DATA. model f-1 2. LISTINGS AND APPROVALS 3. TECHNICAL DATA. Page 1 of 11 Page 1 of 11 1. DESCRIPTION The Viking Model F-1 Dry Pipe Valve is a latching differential valve used to separate the water supply from the dry pipe sprinkler system. The valve combines a positive latching

More information

Grooved Piping System for Fire Protection Services

Grooved Piping System for Fire Protection Services Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic

More information

TECHNICAL DATA. Table 1: Model F1 Dry Valve Part Numbers and Specifications

TECHNICAL DATA. Table 1: Model F1 Dry Valve Part Numbers and Specifications Page 1 of 11 1. DESCRIPTION The Viking Model F-2 Dry Pipe Valve is a latching differential valve used to separate the water supply from the dry pipe sprinkler system. The valve combines a positive latching

More information

Instructions for Installation, Operation, Care and Maintenance

Instructions for Installation, Operation, Care and Maintenance Bulletin 59 Model DDX Deluge Valve (50 mm), ½ (65 mm), (80 mm), 76 mm, 4 (00 mm), 6 (50 mm), 65 mm & 8 (00 mm) Bulletin 59 Instructions for Installation, Operation, Care and Maintenance Wet Pilot Line,

More information

TECHNICAL DATA. Q= C v P S

TECHNICAL DATA. Q= C v P S 1 of 9 1. DESCRIPTION The Viking Model E-1 Deluge Valve is a quick-opening, differential diaphragm, flood valve with one moving part. The deluge valve is used to control water flow in deluge and preaction

More information

FireLock NXT Deluge Valve. With Deluge Trim Grooved x Grooved. System No. Submitted By Spec Sect Para Location Date Approved Date

FireLock NXT Deluge Valve. With Deluge Trim Grooved x Grooved. System No. Submitted By Spec Sect Para Location Date Approved Date MEA: 248-98-E CSFM: 7770-0531-117 The patent-pending Victaulic Series 769 FireLock NXT controls the water supply entry into the deluge system piping and open sprinklers. The Series 769 is a low differential,

More information

Grooved Piping System for Fire Protection Services

Grooved Piping System for Fire Protection Services Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic

More information

TECHNICAL DATA VK810 (65 ) VK811 (80 ) VK812 (95 ) VK813 (110 )

TECHNICAL DATA VK810 (65 ) VK811 (80 ) VK812 (95 ) VK813 (110 ) February 11, 2005 Spray Nozzle 32 a 1. PRODUCT NAME Viking Model E Spray Nozzles VK810 - VK817 65, 80, 95, 110, 125, 140, 160, and 180 Pattern 1.2, 1.8, 2.3, 3.2, 4.1, 5.6, 7.2 nominal U.S. K-Factors Available

More information

DELUGE VALVE DATA SHEET

DELUGE VALVE DATA SHEET FIRE FIGHTING EQUIPMENT DATA SHEET DELUGE VALVE DATA SHEET JOB NO. : RFQ. NO. : ISSUE : SHEET OF 01 CUSTOMER : ITEM NO. : 02 PROJECT : QUANTITY : 03 LOCATION : SERVICE : FIRE WATER AND / OR FOAM SYSTEM

More information

SOLID CONE SPRAY NOZZLES TECHNICAL DATA

SOLID CONE SPRAY NOZZLES TECHNICAL DATA November 2, 2007 Spray Nozzle 20 SOLID CONE SPRAY NOZZLES 1. DESCRIPTION Viking Model A-2, A-2X, B-2, C-2, and D-2 Solid Cone Spray Nozzles are non-automatic pattern, open, directional discharge spray

More information

VNIV.EX454 Sprinklers, Automatic and Open. Sprinklers, Automatic and Open

VNIV.EX454 Sprinklers, Automatic and Open. Sprinklers, Automatic and Open VNIV.EX454 Sprinklers, Automatic and Open Page Bottom Sprinklers, Automatic and Open See General Information for Sprinklers, Automatic and Open RELIABLE AUTOMATIC SPRINKLER CO INC 1470 SMITH GROVE RD LIBERTY,

More information

TECHNICAL DATA. Inlet Type Outlet Type OBSOLETE 6 (DN150)

TECHNICAL DATA. Inlet Type Outlet Type OBSOLETE 6 (DN150) January 13, 2006 Deluge Valves 211 a 1. PRODUCT NAME Viking Model E-1 Deluge Valve 3 (DN80) Available since 1985 4 (DN100) Available since 1985 6 (DN150) Available since 1984 2. MANUFACTURER THE VIKING

More information

TECHNICAL DATA. Q= C v P Cv = Flow Factor (GPM/1 PSI P)

TECHNICAL DATA. Q= C v P Cv = Flow Factor (GPM/1 PSI P) 1 of 9 1. DESCRIPTION The Viking 2 (DN50) is a quick-opening, differential diaphragm, flood valve with one moving part. The deluge valve is used to control water flow in deluge and preaction sprinkler

More information

Wet alarm valves. Wet alarm valves. CE trim

Wet alarm valves. Wet alarm valves. CE trim Description Usually, a wet alarm valve station includes: a Rolland wet alarm valve linked to the water motor gong. a set of valves and by pass used to test the system. a drain valve. a test valve gauges

More information

TECHNICAL DATA. Trimpac 244a. April 15, 2011

TECHNICAL DATA. Trimpac 244a. April 15, 2011 April 15, 2011 Trimpac 244a 1. DEsCrIpTION DESCRIPTION TRIMPAC Model B-1 and B-1B is a factory-assembled trim package with an electric release module in a metal enclosure. The standard trim normally required

More information

Series 756 FireLock Dry System Check Valve

Series 756 FireLock Dry System Check Valve R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series FireLock Dry System Check Valve Grooved X Grooved and Flanged X Grooved 0.0 VICTAULIC IS AN ISO 900 CERTIFIED COMPANY PRODUCT DESCRIPTION The Victaulic

More information

TECHNICAL DATA 2-1/2-8 (dn65 - dn200)

TECHNICAL DATA 2-1/2-8 (dn65 - dn200) 1 of 13 1. DESCRIPTION The Viking Flow Control Valve is a quick opening, differential diaphragm flood valve with a spring loaded floating clapper. The Flow Control Valve can be used to facilitate manual

More information

Model CV-1FR Grooved-End Riser Check Valves 2 Inch to 12 Inch (DN50 to DN300) General Description. Installation. Technical Data

Model CV-1FR Grooved-End Riser Check Valves 2 Inch to 12 Inch (DN50 to DN300) General Description. Installation. Technical Data Worldwide Contacts www.tyco-fire.com Model CV-FR Grooved-End Riser Check Valves Inch to Inch (DN0 to DN00) General Description The TYCO Model CV-FR Grooved- End Riser Check Valve is a compact and rugged

More information

TECHNICAL DATA 1-1/2 (dn40)

TECHNICAL DATA 1-1/2 (dn40) July 1, 2011 Deluge Valves 209a DESCRIPTION The Viking Model E-3 1-1/2 Deluge Valve is a quick-opening, differential type flood valve with a rolling diaphragm clapper. The deluge valve is used to control

More information

TECHNICAL DATA. Trimpac 249a. September 16, 2013

TECHNICAL DATA. Trimpac 249a. September 16, 2013 September 16, 2013 Trimpac 249a 1. DESCrIpTION DESCRIPTION TRIMPAC Model B-4, B-4B & B-4S is a factory assembled trim package for a single interlocked with a pneumatic release module in a metal enclosure.

More information

TUV India Private Ltd. APPROVED

TUV India Private Ltd. APPROVED TUV India Private Ltd. DELUGE VALVES HD Deluge Valves are automatic reset or field manual reset type. The valves are intended for use in deluge, pre-action, foam water system and many more fire protection

More information

DELUGE VALVE MODEL: SD-DVA TECHNICAL DATA : VALVE OPERATION TRIM DESCRIPTION DESCRIPTION PRESSURE THREADED OPENING

DELUGE VALVE MODEL: SD-DVA TECHNICAL DATA : VALVE OPERATION TRIM DESCRIPTION DESCRIPTION PRESSURE THREADED OPENING DELUGE VALVE MODEL: SD-DVA TECHNICAL DATA : NOMINAL SIZE MATERIAL MAXIMUM SERVICE PRESSURE 200, 150, 100, 80 & 50NB Cast Iron 12 Bar (175 PSI) THREADED OPENING MOUNTING FACTORY HYDROSTATIC TEST PRESSURE

More information

TECHNICAL DATA CAUTION

TECHNICAL DATA CAUTION Page 1 of 6 1. DESCRIPTION The Viking Model D-2 Accelerator is a quick-opening device, with an integral anti-flood assembly, used to increase the operating speed of a differential type dry pipe valve.

More information

MODEL UM UNIVERSAL MANIFOLD ASSEMBLY (With or Without Control Valve) 1¼", 1½", 2", 2½", 76.1mm, 3", 4", 6",165.1mm, 8"

MODEL UM UNIVERSAL MANIFOLD ASSEMBLY (With or Without Control Valve) 1¼, 1½, 2, 2½, 76.1mm, 3, 4, 6,165.1mm, 8 4077 Airpark Dr. Standish, MI 48658 989-846-4583 www.globesprinkler.com Technical Support 989-414-2600 techservice@globesprinkler.com MODEL UM UNIVERSAL MANIFOLD ASSEMBLY (With or Without Control Valve)

More information

TECHNICAL DATA SHEET. Medium Velocity Water Spray Nozzle. Page 1. Description. Technical and Environmental Specification. Installation & Maintenance

TECHNICAL DATA SHEET. Medium Velocity Water Spray Nozzle. Page 1. Description. Technical and Environmental Specification. Installation & Maintenance Description The LIFECO s are open type (non-automatic nozzles, designed for directional spray application in fixed fire protection system. Medium velocity water spray nozzle has an external deflector,

More information

Q= C v P S. Flow control valve Model j-2 Halar coated

Q= C v P S. Flow control valve Model j-2 Halar coated October 22, 2010 Flow Control 507a 1. DESCRIPTION The Viking Flow Control Valve is a quick opening, differential diaphragm flood valve with a spring loaded floating clapper. The Flow Control Valve can

More information

Instructions for Installation, Operation Care and Maintenance

Instructions for Installation, Operation Care and Maintenance Model A Dry Pipe Valve Bulletin 353 Rev.K Bulletin 353 Rev.K Instructions for Installation, Operation Care and Maintenance 2 1 2 (65mm) Valve With Model A Trim Listed by Underwriters Laboratories, Inc.

More information

Victaulic Fittings, Couplings, Valves & Sprinkler Heads for the Fire Sprinkler Market Keeping the art of distribution simple

Victaulic Fittings, Couplings, Valves & Sprinkler Heads for the Fire Sprinkler Market Keeping the art of distribution simple Victaulic Fittings, Couplings, Valves & Sprinkler Heads for the Fire Sprinkler Market Keeping the art of distribution simple Victaulic Fittings, Couplings, Valves & Sprinkler Heads for the Fire Sprinkler

More information

A. This Section includes general duty valves common to several HVAC piping systems.

A. This Section includes general duty valves common to several HVAC piping systems. SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply

More information

TECHNICAL DATA. Q= C v P S FLOW CONTROL VALVE MODEL H-2 HALAR COATED 2 (DN50) - 6 (DN150)

TECHNICAL DATA. Q= C v P S FLOW CONTROL VALVE MODEL H-2 HALAR COATED 2 (DN50) - 6 (DN150) 1 of 12 1. DESCRIPTION The Viking Flow Control Valve is a quick opening, differential type flood valve with a spring loaded rolling diaphragm clapper. The Flow Control Valve can be used to facilitate manual

More information

30.85 FireLock NXT Actuated Valve with LPCB Approved Preaction Trim

30.85 FireLock NXT Actuated Valve with LPCB Approved Preaction Trim Actuated Valve with LPCB Approved Preaction Trim 104g/01 with: - Electric Activation with Redundant Solenoid Valve - Electric Activation with Redundant Solenoid Valve and AutoConvert Dry Trim - Double

More information

TotalPac 3 Deluge, Electric release Remote controlled system

TotalPac 3 Deluge, Electric release Remote controlled system (Optional) DESCRIPTION This TOTALPAC 3 integrated fire protection system by FireFlex Systems Inc. consists of a deluge system trim totally preassembled, pre-wired and factory tested. All electrical and

More information

TECHNICAL DATA. Viking Technical Data may be found on Style: 90 Degree Pattern (inlet to outlet)

TECHNICAL DATA. Viking Technical Data may be found on Style: 90 Degree Pattern (inlet to outlet) Flow Control 500a DESCRIPTION The Viking 1-1/2 is a quick opening, differential type flood valve with a spring loaded rolling diaphragm clapper. The can be used to facilitate manual or automatic on/off

More information

TECHNICAL DATA TRIMPAC MODEL B-4, B-4B & B-4S SINGLE INTERLOCK PREACTION SYSTEM WITH PNEUMATIC RELEASE

TECHNICAL DATA TRIMPAC MODEL B-4, B-4B & B-4S SINGLE INTERLOCK PREACTION SYSTEM WITH PNEUMATIC RELEASE Page 1 of 20 1. DESCRIPTION TRIMPAC Model B-4, B-4B & B-4S is a factory assembled trim package for a single interlocked preaction system with a pneumatic release module in a metal enclosure. The standard

More information

Model VKFD28 Flexible Sprinkler Drops (LPCB Approved) Installation Manual. January 2016 Form No. F_ Rev 16.1

Model VKFD28 Flexible Sprinkler Drops (LPCB Approved) Installation Manual. January 2016 Form No. F_ Rev 16.1 Model VKFD28 Flexible Sprinkler Drops (LPCB Approved) Installation Manual January 2016 Page 2 of 10 TABLE OF CONTENTS Section Description Page 1 Benefits 3 2 Installation Instructions 3 3 Technical Data

More information

Model F822 thru F834 Mulsifyre Directional Spray Nozzles, Open, High Velocity General Description

Model F822 thru F834 Mulsifyre Directional Spray Nozzles, Open, High Velocity General Description Technical Services: Tel: () 31-931 / Fax: () 791-55 Model F thru F3 Mulsifyre Directional Spray Nozzles, Open, High Velocity General Description The Mulsifyre Nozzles are open (nonautomatic) nozzles and

More information

SECTION VALVES

SECTION VALVES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:

More information

TotalPac 3 Deluge system Pneumatic release

TotalPac 3 Deluge system Pneumatic release (Optional) DESCRIPTION This TOTALPAC 3 integrated fire protection system by FireFlex Systems Inc. consists of a deluge system trim totally preassembled, pre-wired and factory tested. All electrical and

More information

TECHNICAL DATA. Q= C v P S FLOW CONTROL VALVE MODEL J-2 HALAR COATED 1-1/2 & 2 (DN40 & DN50) 1. DESCRIPTION

TECHNICAL DATA. Q= C v P S FLOW CONTROL VALVE MODEL J-2 HALAR COATED 1-1/2 & 2 (DN40 & DN50) 1. DESCRIPTION Page 1 of 9 1. DESCRIPTION The Viking Flow Control Valve is a quick opening, differential diaphragm flood valve with a spring loaded floating clapper. The Flow Control Valve can be used to facilitate manual

More information

FireLock V36, K8.0 Models V3611, V3612

FireLock V36, K8.0 Models V3611, V3612 FireLock V36, K8.0 Models V3611, V3612 40.65 Dry Type Pendants Standard and Quick Response Technical Specifications: Models: V3612 and V3611 Style: Horizontal Sidewall and Recessed Horizontal Sidewall

More information

FIRE SPRINKLER SYSTEM

FIRE SPRINKLER SYSTEM CD Alarm Check Valve SAV-CD-100 (Alarm Valve) SAV-CD-150 (Alarm Valve) Size (mm) Standard Material Rated Pressure Test Pressure Marking Flange Dimension Installation SAG-CD (Alarm Gong) SAG-CD (Alarm Gong)

More information

TECHNICAL DATA. Q= C v P S. Table 1 - Valve Part Numbers and Specifications

TECHNICAL DATA. Q= C v P S. Table 1 - Valve Part Numbers and Specifications June 24, 2011 Flow Control 504a 1. DESCRIPTION The Viking Flow Control Valve is a quick opening, differential type flood valve with a spring loaded rolling diaphragm clapper. The Flow Control Valve can

More information

BS 5163 Resilient Wedge Gate Valve

BS 5163 Resilient Wedge Gate Valve BS 516 Resilient Wedge Gate Valve BS 516 Flanged Resilient OS&Y Gate Valve, Type A, (XZ41X), /16, Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water,

More information

I-VICFLEX.AB7 VicFlex Sprinkler Fittings for Ceiling Suspension Systems STYLE AB7

I-VICFLEX.AB7 VicFlex Sprinkler Fittings for Ceiling Suspension Systems STYLE AB7 INTRODUCTION WARNING Read and understand all instructions before attempting to install any Victaulic VicFlex products. Wear safety glasses, hardhat, and foot protection. These installation instructions

More information

TotalPac 3 Firecyle III Wet pipe Remote controlled system

TotalPac 3 Firecyle III Wet pipe Remote controlled system (Optional) DESCRIPTION This TOTALPAC 3 integrated fire protection system by FireFlex Systems Inc. consists of a Firecycle III system trim totally preassembled, pre-wired and factory tested. All electrical

More information

DV-5a Automatic Water Control Valve Single Interlock Preaction Fire Protection Systems 1-1/2 Inch to 8 Inch (DN40 to DN200) General Description

DV-5a Automatic Water Control Valve Single Interlock Preaction Fire Protection Systems 1-1/2 Inch to 8 Inch (DN40 to DN200) General Description Worldwide Contacts www.tyco-fire.com DV-5a Automatic Water Control Valve Single Interlock Preaction Fire Protection Systems 1-1/ Inch to Inch (DN40 to DN00) General Description The TYCO DV-5a Automatic

More information

MEDIUM VELOCITY WATER SPRAY NOZZLE

MEDIUM VELOCITY WATER SPRAY NOZZLE MEDIUM VELOCITY WATER SPRAY NOZZLE HD FIRE PROTECT TECHNICAL DATA MODEL MV-A & MV-AS Brass Material MV-B & MV-BS Stainless Steel Material MV-E is with Aluminium Bronze Material TYPE MV-A, MV-B & MV-E are

More information

Price Book - Section 7 Nozzles and Sprinkler Accessories

Price Book - Section 7 Nozzles and Sprinkler Accessories Effective Date Price Book - Protectospray Nozzles Model D-3 Orifice Size #16 to #34 Inclusive with 1 /2" NPT Connection, Brass Protectospray Nozzles Protectospray Nozzles are available as open nozzles

More information

Price Book - Section 7 Nozzles and Sprinkler Accessories

Price Book - Section 7 Nozzles and Sprinkler Accessories Effective Date Price Book - Protectospray Nozzles Model D-3 Orifice Size #16 to #34 Inclusive with 1 /2" NPT Connection, Brass Protectospray Nozzles Protectospray Nozzles are available as open nozzles

More information

Data Sheet Issue E

Data Sheet Issue E Data Sheet. General Description s are open type (nonautomatic) nozzles, designed for directional spray application in fixed fire protection system. Medium velocity water spray nozzle has an external deflector,

More information

TECHNICAL DATA P S. Q= Cv MODEL E-2 DELUGE VALVE HALAR COATED ANGLE STYLE

TECHNICAL DATA P S. Q= Cv MODEL E-2 DELUGE VALVE HALAR COATED ANGLE STYLE 1 of 13 1. DESCRIPTION Viking Deluge Valves are quick opening, differential diaphragm flood valves with one moving part. The Viking Model E-2 Halar Coated Deluge Valve is identical to the Viking Model

More information

Series 758 FireLock Actuated System Valve

Series 758 FireLock Actuated System Valve R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series 58 FireLock Actuated System Valve With Deluge Trim Grooved X Grooved and Flanged X Grooved 30.04 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT

More information

Series 769 FireLock NXT Deluge Valve

Series 769 FireLock NXT Deluge Valve IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS Series 79 FireLock NXT Deluge Valve With Deluge Trim Grooved X Grooved 30.81 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The patent-pending

More information

FIRE PROTECTION PRODUCTS

FIRE PROTECTION PRODUCTS FIRE PROTECTION PRODUCTS Rev.0119 6 info@ayvaz.com www.ayvaz.com 1 FIRE PROTECTION PRODUCTS ANGULAR EXPANSION JOINTS GIMBAL TYPE SEISMIC EXPANSION JOINTS Bellow Material Stainless Steel AISI 321 (Opt.

More information

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

Features 1. Differential Latch-type, lightweight, dependable

Features 1. Differential Latch-type, lightweight, dependable Bulletin 516 Rev. B Model DDX-SS Deluge Valve (100mm), (150mm) & (200mm) Bulletin 516 Rev. B Features 1. Differential Latch-type, lightweight, dependable construction. 2. Easily trimmed for releasing by:

More information

MODEL 106/206-PG POWER OPERATED GLOBE VALVE Sizes 1/2" to 8" (106-PG) 3" to 10" (206-PG) Installation, Operating and Maintenance Instructions

MODEL 106/206-PG POWER OPERATED GLOBE VALVE Sizes 1/2 to 8 (106-PG) 3 to 10 (206-PG) Installation, Operating and Maintenance Instructions MODEL 106/206-PG POWER OPERATED GLOBE VALVE Sizes 1/2" to 8" (106-PG) 3" to 10" (206-PG) Installation, Operating and Maintenance Instructions DESCRIPTION: This valve is the basic component used for most

More information

Model DDX Deluge Valves 4" (100 mm), 6" (150 mm) and 165 mm Sizes

Model DDX Deluge Valves 4 (100 mm), 6 (150 mm) and 165 mm Sizes Features 1. Differential-type, lightweight, dependable construction. 2. Easily trimmed for releasing by: Manual pull stations Wet pilot sprinklers Dry pilot actuators Solenoid valves 3. Drop in seat &

More information

Valve Selection. 1. Function and service considerations

Valve Selection. 1. Function and service considerations 1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.

More information

SECTION VALVES PART 1 - GENERAL

SECTION VALVES PART 1 - GENERAL 1.01 RELATED DOCUMENTS SECTION 15100 VALVES PART 1 - GENERAL A. The work in this section includes the furnishing and installation of all control valves and accessories shown on the construction plans and

More information

SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.

SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems. SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000

More information

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME

More information

Iron Check Valves Illustrated Index

Iron Check Valves Illustrated Index Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check

More information

Data Sheet 3.03 Issue D

Data Sheet 3.03 Issue D Description Rapidrop Flexible Sprinkler Hose connects the sprinkler to the branch pipe. The flexible stainless steel hose and fittings are particularly suited for use in suspended ceiling applications.

More information

PRODUCT CATALOG THE BEST IN FIRE PROTECTION EQUIPMENT

PRODUCT CATALOG THE BEST IN FIRE PROTECTION EQUIPMENT THE BEST IN FIRE PROTECTION EQUIPMENT PRODUCT CATALOG ACCESS DOORS ADAPTERS CABINETS DRY HYDRANTS FIRE DEPT CONNECTIONS FDC ACCESSORIES FIRE EXTINGUISHERS FIRE HOSES FIRE HOSE RACKS & REELS NOZZLES RISER

More information

TECHNICAL DATA CONCENTRATE CONTROL VALVE APPLICATIONS, PRIMING CONNECTIONS, AND TRIMS 1. GENERAL DESCRIPTION 2. LISTINGS AND APPROVALS.

TECHNICAL DATA CONCENTRATE CONTROL VALVE APPLICATIONS, PRIMING CONNECTIONS, AND TRIMS 1. GENERAL DESCRIPTION 2. LISTINGS AND APPROVALS. Page 1 of Telephone: 29-95-9501 Technical Services: 877-38-5 Fax: 29-818-180 Email: techsvcs@vikingcorp.com 1. GENERAL DESCRIPTION The Halar Coated Concentrate Control (CCV) is utilized in Viking foam

More information

Model DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Electric Actuation

Model DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Electric Actuation Deluge Valve DV-5 Model DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Electric Actuation GeneralDescription The Model DV-5 Deluge Valve (described in Technical

More information

MODEL RCW DELUGE SYSTEM ELECTRIC, WET PILOT, AND DRY PILOT ACTUATION

MODEL RCW DELUGE SYSTEM ELECTRIC, WET PILOT, AND DRY PILOT ACTUATION 0 Airpark Dr. Standish, MI 868 989-86-8 www.globesprinkler.com Technical Support 989--00 techservice@globesprinkler.com MODEL RCW DELUGE SYSTEM ELECTRIC, WET PILOT, AND DRY PILOT ACTUATION GENERAL DESCRIPTION

More information

BERMAD Waterworks. Pressure Relief/Sustaining Valve. Model: WW Series. Features and Benefits. Major Additional Features

BERMAD Waterworks. Pressure Relief/Sustaining Valve. Model: WW Series. Features and Benefits. Major Additional Features Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive

More information

A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.

A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems. SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing

More information

SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.

SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping. SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves

More information

Innovation + Quality. Valves, controls + systems Balancing and Control Valves

Innovation + Quality. Valves, controls + systems Balancing and Control Valves Innovation + Quality Valves, controls + systems Balancing and Control Valves Cocon Q Pressure independent control valve Product specification Size: L1 L2 H1 H2 ½, ½ LF 2.75 3.9 2.0 1.9 ¾ LF 2.9 4.2 2.0

More information

TECHNICAL DATA OBSOLETE. Inlet Type Outlet Type in mm. Thread Thread in. ANSI B Flanged Flanged in.

TECHNICAL DATA OBSOLETE. Inlet Type Outlet Type in mm. Thread Thread in. ANSI B Flanged Flanged in. August 19, 2003 Flow Control 504 a 1. PRODUCT NAME Viking Model H-2 Halar Coated Flow Control Valve 2" (50mm), 3" (80mm), 4" (100mm), 6" (150mm) Halar Coating Manufactured 1994-2. MANUFACTURER THE VIKING

More information

5 1 /4 PACER. It s AMERICAN What We Know. DARLING MARK 73 2 FIRE HYDRANT AMERICAN FLOW CONTROL WATEROUS FIRE HYDRANT

5 1 /4 PACER. It s AMERICAN What We Know. DARLING MARK 73 2 FIRE HYDRANT AMERICAN FLOW CONTROL WATEROUS FIRE HYDRANT WATEROUS FIRE HYDRANT DUCTILE IRON 250 P.S.I.G. WATEROUS FIRE HYDRANT AMERICAN FLOW CONTROL It s AMERICAN What We Know. DARLING MARK 73 2 FIRE HYDRANT CONSTRUCTION WATEROUS FIRE HYDRANT TWO PIECE OPERATING

More information

MEDIUM VELOCITY WATER SPRAY NOZZLE

MEDIUM VELOCITY WATER SPRAY NOZZLE MEDIUM VELOCITY WATER SPRAY NOZZLE TECHNICAL DATA MODEL MV-A & MV-AS Brass Material MV-B & MV-BS Stainless Steel Material MV-E is with Aluminium Bronze Material TYPE MV-A, MV-B & MV-E are without strainer

More information

Instructions for Installation, Operation, Care and Maintenance

Instructions for Installation, Operation, Care and Maintenance Model H Deluge Riser Assembly Bulletin 507 Rev. D Bulletin 507 Rev. D Instructions for Installation, Operation, Care and Maintenance 1 1 / 2 (40mm) Size Electric Actuation The Reliable Automatic Sprinkler

More information

DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Wet Pilot Actuation General Description

DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Wet Pilot Actuation General Description Worldwide Contacts www.tycofire.com DV Deluge Valve, Diaphragm Style, / thru Inch (DN0 thru DN00), Deluge System Wet Pilot Actuation General Description The DV Deluge Valve (described in Technical Data

More information

SECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY

SECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure

More information

MCS TYPE B FOAM MAKER & FOAM CHAMBER NDD010. Approvals: UL, ULC

MCS TYPE B FOAM MAKER & FOAM CHAMBER NDD010. Approvals: UL, ULC Approvals: UL, ULC Superior Foam Quality Operates At 30 PSI (2.1 bar) Minimum Tool Free Maintenance Corrosion Resistant Polyester Finish Double Aeration Foam Maker Description The MCS Foam Maker and Foam

More information

PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017

PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017 SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Vacuum breakers. 2. Backflow preventers. 3. Water pressure-reducing valves. 4. Balancing valves.

More information