Description Part No. Price. Larger Withdrawable PVC Injection Tubes No Injection Valve. With injection Valve

Transcription

1 Revised: 1st January WITHDRAWABLE PVC INJECTION TUBES With spring loaded injection valve. 3.1 Miscellaneous Items 6x4 tube connection x 3/4" BSPT 8x5 tube connection x 3/4" BSPT 12x9 tube connection x 3/4" BSPT PA PA PA ProMinent Note: The above assemblies include a 3/4" BSP Full Bore Stainless Steel ball valve (SS), and a SS nipple. Note: Standard length is 75mm of tube past the nipple. Maximum length can be up to 150mm, longer than this may be subject to damage. Larger Withdrawable PVC Injection Tubes No Injection Valve 16mm Hosetail & 1 BSPT Male 20mm Hosetail & 1" BSPT Male 25mm Hosetail & 1" BSPT Male With injection Valve 16mm Hosetail & 1 BSPT Male 20mm Hosetail & 1 BSPT Male 25mm Hosetail & 1 BSPT Male PA PA PA PA PA PA Note: The above assemblies include a 1" BSP Full Bore Stainless Steel ball valve (SS), and a SS nipple. Note: Standard length is 75mm of tube past the nipple. Maximum length can be up to 150mm, longer than this may be subject to damage. Note: For extra long injection tubes to suit Large non-withdrawable injection Nipples 1/2" BSPT Hex Nipple 316 SS A /4" BSPT Hex Nipple 316 SS A " BSPT Hex Nipple 316 SS A Ball Valves 1/2" BSPF Full Bore Stainless Steel Ball Valve A /4" BSPF Full Bore Stainless Steel Ball Valve A " BSPF Full Bore Stainless Steel Ball Valve A WALL MOUNTING BRACKETS - not drilled. Wall Mounting Bracket PVC suit for Beta4 & Concept pumps Wall Mounting Bracket PVC suit for Beta 5 & GALA pumps H x W x D 120 x 120 x 120 A x 150 x 150 A Wall Mounting Bracket PVC suit for Delta, Sigma 1, 2 & 3 pumps 210 x 160 x 210 A MOUNTING BOARDS - H.D.P.E. 15 mm thick Size A x 400 Size B x 500 Size C x 600 A A A Note: Add $ 112 per hour mounting time Size No. Typical Use Assembly Time Size A Conductivity... D2C + DGMA Size B dialog or D2C + CO 2 + DGMA Size C As per B + 2 small pumps 3 hours 4 hours 4 hours

2 ProMinent 3.2 Miscellaneous Items B 3.2 Revised: 1st January 2016 ProMinent CALIBRATION CYLINDERS Diameter Height Fittings Fittings Size A B ± 3mm Top Bottom Part No 100 ml ½ BSPM ½ BSPM PA ml ½ BSPM ½ BSPM PA ml ¾ BSPM ¾ BSPM PA ml SWF 15 SWF PA ml SWF 20 SWF PA ml SWF 40 SWF PA ml SWF 40 SWF PA A ml PA ml PA PVC PULSATION DAMPNERS - Air to liquid 6x4 Clear Sight Tube PA x5 Clear Sight Tube PA x9 Clear Sight Tube PA /4" BSPT Male 0.5 Litres l/h PA " BSPT Male 1.0 Litres l/h PA " BSPT Male 2.0 Litres l/h PA " BSPT Male 4.0 Litres l/h PA PA T by others. MAXIMUM 10 Bar pressure. Acid Fume Scrubber The Acid Fume Scrubber (AFS) is a proprietary device that allows for direct venting of an acid tank located inside a mechanical room. The AFS eliminates the need for costly venting via fans to outside areas or secondary water tank type fume traps. The result is a fumefree workplace with added protection of metal and electrical components.the proprietary reagent will change from white to purple when reagent is no longer effective. Designed for muriatic/ hydrochloric acid tanks proprietary reagents Ordering Information: Acid fume scrubber PNo: PA SL G

3 Revised: 1st January Hidracar Pulsation Dampers A pulsation damper is a vessel with gas inside, normally Nitrogen. In the pulsation dampers there is an element to isolate the gas form ProMinent to the separator element shape. The choice of one type or other will depends on the special performances of the circuit such as; U001A01V1-PC 10 Bar Viton Bladder PVC U002A01V1-PC 10 Bar Viton Bladder PVC U003A01V1-PC 10 Bar Viton Bladder PVC U007A01V1-PC 10 Bar Viton Bladder PVC U010A01 1-PC 10 Bar Bladder PVC U010A01V1-PC 10 Bar Viton Bladder PVC U015A01V1-PC 10 Bar Viton Bladder PVC U001V-PC U002V-PC U003V-PC U007V-PC U015V-PC Bladder Insert Viton Pulsation Damper Bladder Insert Viton Pulsation Damper Bladder Insert Viton Pulsation Damper Bladder Insert Viton Pulsation Damper Bladder Insert Viton Pulsation Damper BV010A1TM Filling kit bar BV(010)(100)A1TM Filling Kit with 2 Pressure Gauges bar BT010A-A A1 Charging valve and pressure gauge Note: 100 bar Filling kits are available Recommended sizes (for more information see next page) All Beta, Gala U001 volume l Delta up to 0730 U001 volume l Delta 0450 & 0280 U002 volume l Sigma 1 up to 35 lph U001 volume l Sigma 1 42 lph & above U002 volume l Sigma 2 up to 109 lph U002 volume l Sigma 2 above 120 lph U003 volume l Sigma 3 up to 330 lph U007 volume l Sigma lph & above U015 volume l Note: nitrogen or air. As a rule of thumb 70% of line pressure. Note: e.

4 ProMinent 3.4 Description Revised: 1st January 2016 Part No. Price

5 Revised: 1st January Miscellaneous Items AC Variable Speed Drives BONFIGLIOLI Vectron SYNTHESIS Single phase in / three phase out inverter limited size make the SYN10 a sound response to the broadest needs for electronic speed variation, where basic performance and contained costs are matched with robust construction and great reliability. Main Standard Hardware features Integrated braking module (SYN10 S 220/07/09 - SYN10 T 400) DC link connection (SYN10 S 220/07/09 - SYN10 T 400) Inverter temperature monitoring 1 Analog Input (V or I selectable) 4 Digital Input (programmable multifunction) 1 Analog Output (voltage linear) Keypad Integrated standard Main Functions I2t Motor temperature monitoring DC braking injection Selectable Volt on Hz characteristic Selectable Auto-restart Selectable stop method Automatic alarm reset Alarm history Momentary power loss prevention Stall prevention Output Short-Circuit protection Grounding fault protection Heat sink overheat Drive Part No Capacity IP20 SYN10 SYN10 S AF 0.20 kw SYN10 SYN10 S AF 0.40 kw SYN10 SYN10 S AF 0.75 kw IP65 SYN10 SYN10 S AFIP kw SYN10 SYN10 S AFIP kw SYN10 SYN10 S AFIP kw ProMinent BONFIGLIOLI Active Series VF Drives Single phase in / three phase out inverter IP20 Main Standard Hardware features Integrated dynamic braking module DC link connection Standard encoder interface Motor temperature monitoring Plug-in power terminals (up to 3kW) Plug-in and programmable control terminals 6 digital input, 1 multifunction input 1 digital Output, 1 multifunction Output 1 relay output (changeover contact) Optional Expansion Modules Optional Communication Modules IP20 Main Software Features Programmable reference value channel, Programmable start and stop characteristics, Motor potentiometer, Programmable S curve, 4 data sets, Auto start-up and commissioning, Auto reset after failure, Auto start after power failure, PL controller, Mechanical brake control free off friction, Index and stability control intelligent current limits, Power failure regulation, Comprehensive monitoring and protection capabilities, High speed control, 3 different brake Management Functions kw 0.75 kw

6 ProMinent 3.6 Revised: 1st January Metering Pump Auto Change Over Controller Pump Automatic Change Over Controller relay: i.e.- Gala or Sigma. ma signal when used with Gala or Sigma pumps. Features : CTP-CO ProMinent Pump Automatic Change Over Controller The ProMinent Fluid Controls Automatic Change Over unit allows 2 ProMinent Dosing pumps to operate in a duty/stand by arrangement. Flow detectors on the outlet of each pump provide fault detection. The switch over unit connects to each pump using ProMinent standard control cable connections and receives an external 4-20mA control signal. Normal Operation During normal operation, both pump selector switches are placed in the AUTO position and either PUMP 1 or Pump 2 is selected on the duty selector. The selected duty pump will then operate until either a fault develops or the position of the selector switches changes. Fault Operation If a fault is detected in the operation of the duty pump, the operation will switch to the standby pump. The fault light on the display panel will illuminate and the retransmit fault signal will close. To Clear a Fault and the switch over unit will revert operation to the duty pump. Pump removal for service pump. When returning the pump to service, reconnect the pump then switch the duty selector to the AUTO position. PA ProMinent Chloramination Dosing System Pump Automatic Change Over For automatic control of chloramination. Has all the functions of PA above, however this is a 2 x 2 system system which controls 2 Chlorine pumps and 2 Amonia pumps. If both chlorine pumps fail then Amonia pumps are shut down. PA

7 Revised: 1st January 2016 ProMinent Beta PROMIX-LB1000 Liquid Polymer Blending System Australian designed and manufactured ProMinent Beta Liquid Polymer Blending System ProMinent into a mixing chamber by the ProMinent Beta metering pump. centrifugal pump. The metering pump is adjustable to achieve the Self Contained The unit is mounted on a polyethylene stand designed for easy 240-volt power outlet. Wetting Assembly designed & built mixing chamber incorporating a venturi which ensures the creation of long chain molecules and no unmixed polymer solution. Flushing After polymer make up is stopped a timer allows for the mixing System Capacity SPECIFICATION Each system includes: 1 x Polyethylene Stand 1 x Water Transfer Pump 1 x ProMinent Beta Metering Pump 1 x Mixing Chamber 1 x Blending Pipe Work 1 x Control Panel PROMIX-LB PROMIX-LB PROMIX-LB

8 ProMinent 3.8 ProMinent spectra Liquid Polymer Blending System ProMinent Spectra PROMIX-LS2000 Liquid Polymer Blending System Australian designed and manufactured 3.8 Revised: 1st January 2016 into a mixing chamber by the ProMinent Spectra metering pump. centrifugal pump. The metering pump is adjustable to achieve the Self Contained The unit is mounted on a polyethylene stand designed for easy 240-volt power outlet. Wetting Assembly designed & built mixing chamber incorporating a venturi which ensures the creation of long chain molecules and no unmixed polymer solution. Flushing After polymer make up is stopped a timer allows for the mixing System Capacity cavity pump is able to handle highly viscous polymers. SPECIFICATION Each system includes: 1 x Polyethylene Stand 1 x Water Transfer Pump 1 x ProMinent Spectra Metering Pump 1 x Mixing Chamber 1 x Blending Pipe Work 1 x Control Panel PROMIX-LS2000 Also available Nalco type with Torture Path mixing...

9 Revised: 1st January Custom made packages are available on request ProMinent

10 ProMinent 3.10 Revised: 1st January 2016