GRO FINISHING EQUIPMENT SPRY FINISHING PKGES Monark 23:1; President 3:1 and 46:1 Features and enefits irless spray technology allows ability to spray a variety of fluids from conventional coatings to high performance corrosion control coatings Extremely reliable and proven Monark and President pumps Ergonomic and easy-to-use packages for the operator Features Silver Plus airless gun Typical pplications Rail Tanks Marine orrosion control Farm and construction General metal fabrication Typical Fluids Handled Epoxies Polyurethanes lkyds Enamels Waterborne Silver Plus HD R airless gun 2 ft. (.6 m) whip hose 2 ft. (7.6 m) fluid hose Reliable President air motor President 3:1 Heavy-Duty art Package 231921 Rugged 2-wheel cart 4
SPRY FINISHING PKGES FINISHING EQUIPMENT GRO Technical Specifications Monark President President Pump ratio 23:1 3:1 46:1 Maximum fluid outlet pressure 23 psi 3 psi 46 psi (16 bar, 16. MPa) (21 bar, 21. MPa) (317 bar, 31.7 MPa) Maximum air input pressure 1 psi 1 psi 1 psi (7 bar,.7 MPa) (7 bar,.7 MPa) (7 bar,.7 MPa) Fluid Flow @ 6 cpm.4 gpm (1.6 lpm) 1. gpm (3.8 lpm). gpm (1.9 lpm) Volume per cycle.9 oz. (27 cc) 2 oz. (62 cc) 1.1 oz. (32 cc) Pump air consumption at 1 psi 3 scfm (.8 m 3 /min.) 1 scfm (.28 m 3 /min.) 1 scfm (.28 m 3 /min.) (7 bar,.7 MPa) air @ 2 cpm Sound pressure level @ 1 psi 7 d 81 d 81 d (7 bar,.7 MPa) air @ 2 cpm ir inlet, package 3/8 npsm(f) 3/8 npsm(f) 3/8 npsm(f) Fluid inlet, pump 3/4 npt(m) 3/4 npt(m) 3/4 npt(m) Fluid outlet, package 1/4 npsm(m) 1/4 npsm(m) 1/4 npsm(m) Weight Wall-mount package 6 lb. (3 kg) 7 lb. (34 kg) 7 lb. (34 kg) Pail-mount 47 lb. (21 kg) N/ N/ gallon (2 l) drum package N/ 24 lb. (19 kg) N/ Light-duty cart 4 lb. (2 kg) N/ N/ Heavy-duty cart 8 lb. (39 kg) 8 lb. (39 kg) 8 lb. (39 kg) Note: For instruction manual numbers, refer to ordering information 41
GRO FINISHING EQUIPMENT SPRY FINISHING PKGES Performance hart for Monark 23:1 Pump Performance hart for President 3:1 Pump FLUID OUTLET PRESSURE psi (bar, MPa) 3 (27, 2.7) 2 (173, 17.3) 2 (138, 13.8) 1 (13, 1.3) 1 (69, 6.9) (34, 3.4) YLES PER MINUTE 1 3 4 6 7 24 (.7) 2 (.6) 16 (.) 12 (.4) 8 (.2) 4 (.1) gpm.1.2.3.4. (lpm) (.4) (.8) (1.1) (1.) (1.9) FLUID FLOW (Pump tested in No. 1 Wt. Oil) IR ONSUMPTION scfm(m 3 /min) FLUID OUTLET PRESSURE psi (bar, MPa) 4 (276, 27.6) 3 (27, 2.7) 2 (138, 13.8) 1 (69, 6.9) YLES PER MINUTE 3 6 9 12 8 (2.3) gpm. 1. 1. 2. (lpm) (1.9) (3.8) (.7) (7.6) FLUID FLOW (Pump tested in No. 1 Wt. Oil) 6 (1.7) 4 (1.1) 2 (.6) IR ONSUMPTION scfm(m 3 /min) IR PRESSURES = @ 1 psi (7 bar,.7 MPa) = @ 7 psi (4.8 bar,. MPa) = @ 4 psi (2.8 bar,.3 MPa) LEGEND ir onsumption Fluid Flow IR PRESSURES = @ 1 psi (7. bar,.7 MPa) = @ 7 psi (4.8 bar,. MPa) = @ 4 psi (2.8 bar,.3 MPa) LEGEND ir onsumption Fluid Flow Performance hart for President 46:1 Pump YLES PER MINUTE FLUID OUTLET PRESSURE psi (bar, MPa) (276, 27.6) 4 (27, 2.7) 3 (138, 13.8) 2 (69, 6.9) 1 (7, 7.) 21 41 62 82 4 (1.1) 32 (.9) 24 (.7) 16 (.) 8 (.2) IR ONSUMPTION scfm(m 3 /min) gpm.2.4.6.8 (lpm) (.8) (1.) (2.3) (3.) FLUID FLOW (Pump tested in No. 1 Wt. Oil) IR PRESSURES = @ 1 psi (7. bar,.7 MPa) = @ 7 psi (4.8 bar,. MPa) = @ 4 psi (2.8 bar,.3 MPa) LEGEND ir onsumption Fluid Flow 42
SPRY FINISHING PKGES FINISHING EQUIPMENT GRO Dimensions Heavy-Duty art-mount Package Monark Pail-Mounted Package ir inlet: 3/8 npsm(f) ir inlet: 3/8 npsm(f) Package fluid outlet: 1/4 npsm(m) 32 in. (813 mm) Package fluid outlet: 1/4 npsm(m) 1.62 in. (27 mm) Pump fluid inlet: 3/4 npt(m) Dimensions For Heavy-Duty art Packages Height Depth Width Monark 38. in. (978 mm) 21 in. (34 mm) 2 in. (8 mm) President 38. in. (978 mm) 21 in. (34 mm) 2 in. (8 mm) 43
GRO FINISHING EQUIPMENT SPRY FINISHING PKGES Dimensions Wall-Mount Package Light-Duty, art-mount Package ir inlet: 3/8 npsm(f) Package fluid outlet: 1/4 npsm(m) Package fluid outlet: 1/4 npsm(m) ir inlet: 3/8 npsm(f) 39.1 in. (993 mm) Pump fluid inlet: 3/4 npt(m) 1.7 in. (4 mm) 14. in. (368 mm) Pump fluid inlet: 3/4 npt(m) Dimensions For Wall-Mount Packages Height Depth Width Monark Max. ft. (1.8 m) 12 in. (3 mm) 12 in. (3 mm) President Max. ft. (1.8 m) 12 in. (3 mm) 12 in. (3 mm) 44
SPRY FINISHING PKGES FINISHING EQUIPMENT GRO Ordering Information 1. Select appropriate spray package (Monark 23:1, President 3:1 or President 46:1) based on pressure and flow requirements of the application. Refer to Monark and President pump performance charts. 2. Select wall-mount, pail-mount, light-duty cart, heavy-duty cart or gallon (2 l) drum (President 3:1 package only) mounting configuration. 3. Select package construction (carbon steel or stainless steel) based on the corrosive and chemical characteristics of the fluid to be handled. 4. Select package with Silver Plus airless gun or bare (without gun or hoses).. Select non-heated or heated package, based on temperature requirements of the fluid to be sprayed. 6. If a heated package is selected, choose 12V, 2V, 24V or 48V voltage, based on electrical installation requirements. 7. For pail-mount configurations, select package with agitator or without agitator. 8. Order package part number. MONRK 23:1 IRLESS SPRY PKGES 23 psi (16 bar, 16. MPa) arbon Steel Part Number Stainless Steel Wall-Mount Pail-Mount Light-Duty art-mount Heavy-Duty art-mount Heated Package Heater Voltage Fluid Filter gitator Siphon Tube ack Pressure Regulator irculation Kit irculation Manifold are Package - no hose or gun Fluid Swivel at Gun Inlet Whip Hose 2 ft. (.6 m) pplicator Fluid Hose 2 ft. (7.6 m) Instruction Manual 232223 3876 232234 3876 232222 Silver Plus Fine Finish 3876 232233 Silver Plus Fine Finish 3876 232293 2 Silver Plus Fine Finish 3879 232381 2 Silver Plus Fine Finish 3879 232291 24 Silver Plus Fine Finish 3879 232379 24 Silver Plus Fine Finish 3879 232292 48 Silver Plus Fine Finish 3879 23238 48 Silver Plus Fine Finish 3879 232434 3876 232446 3876 232433 Silver Plus Fine Finish 3876 23244 Silver Plus Fine Finish 3876 232437 Silver Plus Fine Finish 3876 232449 Silver Plus Fine Finish 3876 232412 38762 232411 Silver Plus Fine Finish 38762 231941 3863 23194 Silver Plus Fine Finish 3863 231949 Silver Plus Fine Finish 3863 231942 ft. Silver Plus Fine Finish 3863 231989 12 Silver Plus Fine Finish 38692 23244 12 Silver Plus Fine Finish 38692 23199 24 Silver Plus Fine Finish 38692 2324 24 Silver Plus Fine Finish 38692 Note: Monark 23:1 packages include a 163xxx tip of choice. 4
GRO FINISHING EQUIPMENT SPRY FINISHING PKGES Ordering Information, continued PRESIDENT 3:1 IRLESS SPRY PKGES 3 psi (21 bar, 21. MPa) arbon Steel Part Number Stainless Steel Wall-Mount Gallon (2 l) Drum Mount Elevator Heavy-Duty art-mount Heated Package Heater Voltage Fluid Filter gitator Siphon Tube ack Pressure Regulator irculation Kit irculation Manifold are Package - no hose or gun Fluid Swivel at Gun Inlet Whip Hose 2 ft. (.6 m) pplicator Fluid Hose 2 ft. (7.6 m) Instruction Manual 23221 3876 232212 3876 2322 Silver Plus HD R 3876 232211 Silver Plus HD R 3876 232269 2 Silver Plus HD R 3879 23237 2 Silver Plus HD R 3879 232267 24 Silver Plus HD R 3879 2323 24 Silver Plus HD R 3879 232268 48 Silver Plus HD R 3879 23236 48 Silver Plus HD R 3879 23163 Silver Plus Fine Finish 3676 231922 3863 231932 3863 231921 Silver Plus HD R 3863 231931 Silver Plus HD R 3863 231923 ft. Silver Plus HD R 363 231933 ft. Silver Plus HD R 3863 231973 12 Silver Plus HD R 38692 23228 12 Silver Plus HD R 38692 231974 24 Silver Plus HD R 38692 23229 24 Silver Plus HD R 38692 Note: President 3:1 packages include a GHD617 tip with an additional tip of choice. President 3:1 gallon (2 l) drum package includes a 163xxx tip of choice. PRESIDENT 46:1 IRLESS SPRY PKGES 46 psi (317 bar, 31.7 MPa) arbon Steel Part Number Stainless Steel Wall-Mount Gallon (2 l) Drum Mount Elevator Heavy-Duty art-mount Heated Package Heater Voltage Fluid Filter gitator Siphon Tube ack Pressure Regulator irculation Kit irculation Manifold are Package - no hose or gun Fluid Swivel at Gun Inlet Whip Hose 2 ft. (.6 m) pplicator Fluid Hose 2 ft. (7.6 m) Instruction Manual 232264 3876 232263 Silver Plus HD R 3876 2322 Silver Plus HD R 3863 Note: President 46:1 packages include a GHD617 tip with an additional tip of choice. 46
SPRY FINISHING PKGES FINISHING EQUIPMENT GRO Monark 23:1, President 3:1 and 46:1 ccessories Whip Hoses Maximum working pressure: 3 psi (27 bar, 2.7 MPa). 1/4 npt(m) x 1/4 npsm(f). S wetted fittings. 236134 1/8 in. x 3 ft. (3 mm x.9 m) 23613 1/8 in. x 6 ft. (3 mm x 1.8 m) Maximum working pressure: 41 psi (28 bar, 2.7 MPa). 1/4 npsm(fbe). SST wetted fittings. 23969 3/16 in. 23.6 in. (4.7 mm x.6 m) 23918 1/4 in. 23.6 in. (6.3 mm x.6 m) Maximum working pressure: 41 psi (28 bar, 28 MPa). 1/4 npsm(fbe). S wetted fittings. 23878 3/16 in. x 23.6 in. (4.7 mm x.6 m) 23879 3/16 in. x 39.4 in. (4.7 mm x 1 m) 238822 1/4 in. x 23.6 in. (6.3 mm x.6 m) 23982 3/16 in. x 39.4 in. (4.7 mm x 1 m) Fluid Hoses Maximum working pressure: 41 psi (28 bar, 28 MPa). 1/4 npsm(fbe). S wetted fittings. 238711 3/16 in. x 16.4 ft. (4.7 mm x m) 238712 3/16 in. x 24.6 ft. (4.7 mm x 7. m) 238713 3/16 in. x ft. (4.7 mm x 1 m) 238826 1/4 in. x 24.6 ft. (6.3 mm x 7. m) 238827 1/4 in. x ft. (6.3 mm x 1 m) Maximum working pressure: 41 psi (28 bar, 28 MPa). 1/4 npsm(fbe). SST wetted fittings. 23917 1/4 in. x 24.6 ft. (6.3 mm x 7. m) 23911 1/4 in. x 32.8 ft. (6.3 mm x 1 m) 239111 1/4 in. x ft. (6.3 mm x 1 m) Maximum working pressure: psi (34 bar, 34 MPa). S wetted fittings. 23838 1/4 in. x 24.6 ft. (6.3 mm x 7. m) 238396 3/8 in. x ft. (9. mm x 1 m) Maximum working pressure: 74 psi (3 bar, MPa) 23772 3/8 in. x ft. (9. mm x 1 m) 2377 1/4 in. x 6 ft. (6.3 mm x 1.8 m) 18918 Fluid Swivel Maximum working pressure: 8 psi (4 bar, 4 MPa). To ease movement of the gun and fluid hose. 1/4-18 npsm. Does not include filter chamber and tip filter. 239394 Fluid Swivel/Filter Maximum working pressure: 8 psi (4 bar, 4 MPa). To ease movement of the gun and fluid hose. 1/4-18 npsm. Fluid Heaters Maximum working pressure: 4 psi (272 bar, 27.2 MPa). SST. 2222 12V 2223 24V 2224 48V 237312 2V 2829 Siphon Kit, arbon Steel Use to siphon fluid from a gallon (2 l) drum. Includes nylon suction hose 214961, 3/4 ID, 6 ft. (1.8 m), 3/4 npt(f) swivel outlet fitting, bung adapter. 2892 Siphon Kit, luminum Use to siphon fluid from a gallon (18.9 l) pail. Includes nylon suction hose 1776, 1 ID, 4 ft. (1.2 m) long, 3/4 npt(f) swivel outlet fitting, inlet strainer. 27484 Siphon Kit, luminum Use to siphon fluid from a gallon (18.9 l) pail. Includes nylon suction hose 21496, 3/4 ID, 3. ft. (1.1 m) long, 3/4 npt(f) swivel outlet fitting. 2364 Suction Kit, arbon Steel Use to siphon material out of a gallon (2 l) closed-end drum. Includes siphon tube, bung adapter, 6 ft. (1.8 m) nitrile hose and 1-1/2 npt(m) outlet fitting. 47