SECION ILE HEC2003/2004 SERIES SERVO VLVE SYSEM he HEC2003/2004 Series Servo System features a high response servo valve, a manifold mounted filter, and three different mechanical mounting options. he manifold can feature either SE or metric straight thread ports and an optional ball valve with a locking handle. he valve offers a spool position feedback signal that can be used for system diagnostics. he HEC2003/2004 Series Servo System is directly driven by Fife s family of electronic controllers, eliminating the need for a separate drive card. Fife offers a servo valve featuring a zero lap spool thereby eliminating dead band. he valve also has an Enable command that can place the valve in an all ports blocked position eliminating the need for a blocking valve in most applications. he HEC2003/2004 offers two different spool confi gurations enabling flows from 30 LM (8 GM) to 83 LM (22 GM). he HEC2003/2004 Series Servo System also has a pressure filter that comes with a dual mechanical/ electrical dirt indicator. CCESSORIES Interface: NF D05, CEO 5, NG 10 Flow Rating at 35 bar (500 SI) per metering edge: 83 LM (22 GM) - HEC2004 models 30 LM (8 GM) - HEC2003 models Frequency Response: > 45 Hz (-3 d at 5% signal) Step Response: < 25 ms at 100% signal ower Consumption: 60 V Max Maximum Operating ressure: ort,, 207 ar (3000 psi) ort 35 ar (500 psi) Minimum ank Line ressure: 1.4 ar (20 psi) ypical Spool Overlap: Zero Overlap Internal Leakage:.5 cu in/min per land at 1000 psi Hysteresis: < 0.5% Repeatability: < 0.5% Viscosity Range: 17 to 65 cst (75 to 300 SSU) Fluids: Mineral ase Hydraulic Fluid Operating emp. Range (mbient): 0 to 60 C (32 to 140 F) Fluid Cleanliness Level: ISO Class 15/12/10 (for longer life) ISO Class 16/14/11 (for normal operation) Voltage Supply: 24 VDC (21 VDC Min., 30 VDC Max.) eak Current 4 amps Command Signals: ± 10 VDC at 100 K Ohm Input Impedance ± 20 m at 499 Ohm Input Impedance rotection Class: I65, NEM 4 (Factory Sealed) Filter: H0735-35-2028 ype: ypassing filter Element: 10 micron, 207 bar (3000 psid) collapse rating Filter Dirt Indicator type of contact electrical rating connector: Electrical/Visual 5 @ 240 VC, 3 @ 28 VDC KEY FEURES High response servo valve with spool position feedback signal ll components are mounted over the drip pan Servo Valve operates on 24V DC Manifold mounted pressure fi lter with dual indicator Option for a prewired junction box SE or Metric female ports counterbalance valve to lock cylinder in place Integrated check valve on return line
EDESL VLVE SND SSEMLY ( SERIES) all Valve on 534.4 (21.04) Counterbalance Valve on Directional Valve code on G Needle Valve Used for manual flow control on valve stand with directional valve (1.00) Lifting Hole 864 (34.01) 1.4 (21.32) 570.8 (22.47) 90.9 (3.58) 4.3 (.17) olt Grip 419.1 (16.50) 19.1 292.1 (.75) (11.50) 368.3 (14.50) Ø 9.7 406.4 (.38) (16.00) (4 laces) * Maximum weight for Series valve stands is.5 kg (122 lbs). Low profile Low floor pro mount le oor design mount design Compact Compact ll components over drip pan ll componets over drip pan ort Descriptions,,, Size SE SE-12 Metric ISO 6149 #M
DRI N RCKE VLVE SND SSEMLY (D SERIES) Counterbalance Valve code 245.1 (9.65) 84.6 (3.33) 496.4 (19.) code Junction ox code all Valve G Needle Valve used for manual flow control on valve stand with directional valve (1.00) Lifting Hole 101.6 (4.00) See Note 902.1 (35.52) 311.2 (12.25) 110.2 (4.34) 177.8 (7.00) See Note 579.6 (22.82) 528.9 (20.82) 11.1 (.44) olt Grip 408.9 (16.10) 419.1 (16.50) 520.2 (20.48) Ø 9.7 (.38) (2 laces) 152.4 333.1 (6.00) (13.11) 158.8 (6.25) Note: 4 x Ø 11.1 (0.44) thru holes available for wall mtg. on 101.6 (4) x 101.6 (4) square pattern Figure 2 * Maximum weight for D Series valve stands is 65.45 kg (144 lbs). Floor or beam mounting capabilities Compact design Junction box available either with or without 24 volt supply. on. ll components over drip pan ort Descriptions,,, Size SE SE-12 Metric ISO 6149 #M
EXENDED VLVE SND SSEMLY (E SERIES) Counterbalance Valve on 194.3 (7.65) 84.6 (3.33) 558.3 (21.98) on Junction box code on all Valve on G Needle Valve used for manual flow control on valve stand with directional valve (1.00) Lifting Eye 260.4 (10.25) 14.2 (50.17) ] 981.1 (38.63) 110.2 (4.34) 951.7 (37.47) Ø 14.3 (.56) (4 laces) 12.7 (.50) olt Grip 418.6 (16.48) 304.8 (12.00) 355.6 (14.00) Figure 3 406.4 (16.00) * Maximum weight for E Series valve stands is 95 kg (209 lbs). ll components over drip pan Junction box available either with or without 24 volt supply. on. ort Descriptions,,, Size SE SE-12 Metric ISO 6149 #M
HEC2003/2004 SERIES SERVO VLVE SYSEM R ORDERING INFORMION art Number Description H4523-2080 Cable assembly with connector for H0930/31-2003/4 servo valve, 4.5 meters (15ft) long H0915-02-2025 Counterbalance valve (comes as a standard on certain v alve stand configurations, see model code on previous page) H0735-35-2028 ressure filter with mechanical and electrical indicator H 2028 Element for H0735-35-2028 pressure filter H00-20-321 ressure gauge R ORDERING INFORMION H E C 2 0 0 X - X X - X X X /X GM Rating 2004-83 LM (22 GM) * preferred option Should be suitable for most guiding applications 2003-30 LM (8 GM) 1 - with directional valve 0 - no directional valve Counterbalance Valve N - H0930-2004 Servo Valve with no counterbalance valve C - H0931-2004 Servo Valve with H0915-02-2025 counterbalance valve O - H0931-2004 Servo Valve with no counterbalance valve ort ype S - SE M - Metric Coil Voltage 0 - no directional valve 1-24V 2-120V 3-240V Valve Command Signal lank - ± 10 V signal /C - ± 20 m signal / - Includes ball valve on supply line ssembly ype E - Extended assembly, does not include junction box E1- Extended assembly with prewired junction box including 24 volt power supply E2- Extended assembly with prewired junction box excluding 24 volt power supply D - Drip pan bracket assembly, does not include junction box D1- Drip pan bracket assembly with prewired junction box including 24 volt power supply D2 - Drip pan bracket assembly with prewired junction box excluding 24 volt power supply - edestal assembly, does not include junction box NORH, CENRL ND SOUH MERIC el +1.405.755.1600 Fax +1.405.755.8425 sales@maxcessintl.com www.maxcessintl.com INDI el +91.22.602633 Fax +91.22.602634 india@maxcessintl.com www.maxcess.in EUROE, MIDDLE ES ND FRIC el +49.6195.7002.0 Fax +49.6195.7002.933 sales@maxcess.eu www.maxcess.eu JN el +81.43.421.1622 Fax +81.43.421.2895 japan@maxcessintl.com www.maxcess.jp CHIN el +86.756.881.9398 Fax +86.756.881.9393 info@maxcessintl.com.cn www.maxcessintl.com.cn KORE, IWN ND SE SI asia@maxcessintl.com www.maxcessintl.asia 2016 Maxcess Revise 2/11/16