Directional Control Valves Slim-Line 9 Series ROSS CONTROLS
IN-LINE DIRECTIONAL VALVES AND MANIFOLDS KEY FEATURES volts DC and volts AC options for solenoid control Available with /8, /, /8, and / port options Flexible mounting - in-line or manifold Resilient seal spool construction Compact size High flow capacity Lube or non-lube service Manual overrides Pressure ports located in valve body Solenoid Controlled Pressure Controlled Manifold Options VALVE TYPE AVAILALE PORT SIZES MOUNTING MAX. FLOW Cv /8 / /8 / IN-LINE MANIFOLD Page SOLENOID PILOT CONTROLLED / NC/NO Spring return.6. / Spring Return.. / Detented.. / Spring Center..6 PRESSURE CONTROLLED / NC/NO Spring return.6.7 / Spring Return..8 / Detented..9 / Spring Center.. MANIFOLD LOCKS, OPTIONS, & ACCESSORIES Manifold locks (/ Valves). Manifold locks (/ & / Valves). Manifold lanking Plates. -. Pilot Coils & Connectors. -. Silencers. -.
Single Solenoid Pilot Controlled Valves 9 Series Port Size -Way -Position Valves, Single Solenoid, Spring Return Normally Closed Normally Closed Valve Model Number# Normally Open Valve Model Number#, SPP SPP Normally Open Avg. C V Weight lb (kg) /8 /8 97KZ D97KZ 97KZ D97KZ.9.8 (.7) / / 97KZ D97KZ 97KZ D97KZ..7 (.) /8 /8 97KZ D97KZ 97KZ D97KZ.6. (.) # Voltage: Z=- VAC, /6 Hz; W= VDC, e.g., 97KW. Valve Dimensions inches (mm) Port Size /8.(.).7(8.).(.) -Ø. (.)..8 (8.) (.) /8 (-Port) P.9 (.) OUT A () -Ø. (.) /8 (A ()-Port).9 (.).8 (9.) R /8 (-Port). (.7) Port Size / -Ø.7 (.). (6.) / (A ()-Port). (.) -Ø.7 (.). (.). (.). (6.) -Ø.7 (.). (6.) OUT P.8 (.) A ().9 (.). (.) / (-Port) / (-Port) R.6 (67.).9 (.).9 (.). (.) -Ø.7 (.) Port Size /8 -Ø.7 (.).79 (.).6 (7.).8 (7.)..9 (.) (.) /8 (-Port) OUT A () /8 (A ()-Port) /8 (-Port) R.(6.).9 (.). (.) P 7 7 Port /8 6 7 8 9 6 8 FLOW CHARTS Port / 6 7 8 9 Port /8 6 7 8 9 Solenoid and Connector included. Manifolds and Accessories ordered separately, refer to page.. For other options, consult ROSS. STANDARD SPECIFICATIONS (for valves on this page): Construction Design Mounting Type Solenoids Spool Inline or manifold mounted AC or DC power; Rated for continuous duty Voltage volts DC: volts AC, /6 Hz Power Consumption (each solenoid). watts on DC;.6 VA holding on /6 Hz Enclosure Rating IP 6, IEC 69 Port Size /8: MICRO-MINI EN 7-8 connector Electrical Connection Port Size / & /8: EN 7-8 Industrial Form connector Temperature Ambient/Media: to F ( to 6 C) Flow Media Filtered air Pilot Supply Internal Operating Pressure. to psig (. to bar) Valve ody: ar Stock Aluminum Construction Material Spool: Stainless Steel Seals: una-n Manual Override Pushbutton, non-locking Valves available with installed prewired connectors, please consult ROSS. Rev. 6/7/8.
Single Solenoid Pilot Controlled Valves -Way -Position Valves, Single Solenoid, Spring Return Port Size Valve Model Number# Avg.,,, SPP C V Weight lb (kg) /8 /8 976KZ D976KZ.9. (.) / /8 976KZ D976KZ..8 (.6) /8 /8 976KZ D976KZ.6.9 (.9) / / 976KZ D976KZ..66 (.7) # Voltage: Z=- VAC, /6 Hz; W= VDC, e.g., 976KW. Valve Dimensions inches (mm) Port Size /8. (.).7 (8.). (.). (.). (8.).8 (.) /8 (-Port).7 (8.).7 (.).7 (.).9 (.) -Ø. (.) /8 (, -Port).9 (.). (8.) /8 (, -Port). (.7) Port Size /.78 (.). (6.). (8.) -Ø.7 (.). (.).7 (7.) / (-Port).9.78 (.) (.).9 (.).98 (6.).8 (.) -Ø.7 (.) 9 Series.9 (.) / (, -Port) /8 (, -Port).6 (67.) Port Size /8..9 (.) (.). (6.) /8 (, -Port).7 (.) 6. (.) -Ø.7 (.).9 (.) Port Size /.. (8.) (6.). (6.) / (, -Port) -Ø..7 (.).6 (.) -Ø..7 (.) A.9 (.).79. (.) (6.).9 (.).9 (.).6 (7.).9 (.) /8 (-Port) -Ø.7 (.) /8 (, -Port).8 (7.). (.).7 (.). (6.).6 (.) / (-Port).8 (.). (.) 6.7 (7.) / (, -Port).9 (7.) FLOW CHARTS 6 8 Port /8 Port / 6 7 8 9 7 6 Port /8 Port / 6 7 8 9 Solenoid and Connector included. Manifolds and Accessories ordered separately, refer to page.. For other options, consult ROSS. Valves available with installed prewired connectors, please consult ROSS. STANDARD SPECIFICATIONS (for valves on this page): Construction Design Mounting Type Solenoids Spool Inline or manifold mounted AC or DC power; Rated for continuous duty Voltage volts DC: volts AC, /6 Hz Power Consumption (each solenoid). watts on DC;.6 VA holding on /6 Hz Enclosure Rating IP 6, IEC 69 Port Size /8: MICRO-MINI EN 7-8 connector Electrical Connection Port Size / & /8: EN 7-8 Industrial Form connector Temperature Ambient/Media: to F ( to 6 C) Flow Media Filtered air Pilot Supply Internal Operating Pressure. to psig (. to bar) Valve ody: ar Stock Aluminum Construction Material Spool: Stainless Steel Seals: una-n Manual Override Pushbutton, non-locking. ROSS CONTROLS. All Rights Reserved. Rev. 6/7/8
Double Solenoid Pilot Controlled Valves 9 Series.9 (.).79. (.) (6.).9 (.).9 (.).9 (.).9 (.). (.) -Way -Position Valves, Double Solenoid, Detented Port Size Valve Model Number# Avg.,,, SPP.7 (8.). (8.).8 (.). (.).7 (8.) /8 (-Port) -Ø.7 (.).7 (.).9 (.) -Ø. (.) /8 (, -Port).9 (.) 6. (9.).7 (.) /8 (-Port).7 (.) 8.8 (.).6 (7.) 8.8 (.) C V. (.7) /8 (, -Port) -Ø.7 (.) /8 (, -Port).9 (.) /8 (, -Port) Weight lb (kg) /8 /8 976KZ D976KZ.9.6 (.8) / /8 976KZ D976KZ.. (.7) /8 /8 976KZ D976KZ.6.8 (.7) / / 976KZ D976KZ.. (.9) # Voltage: Z=- VAC, /6 Hz; W= VDC, e.g., 976KW. Valve Dimensions inches (mm) Port Size /8 Port Size /8.8 (7.) Port Size / Port Size /. (6.).9 (.). (.).7 (7.). (8.).78 (.) / (, -Port) / (-Port).9 (.) -Ø.7 (.) 7.6 (87).78 (.) 7.6 (79.).8 (.) 9. (.) 9. (6.) A -Ø.7 (.).9 (.) /8 (, -Port).6 (.) - Ø.7 (.). (6.) / (, -Port).9 (.). (.).7 (.) / (-Port) -Ø.7 (.) / (, -Port).6 (67.).9 (.).9 (7.) FLOW CHARTS 6 8 Port /8 Port / 6 7 8 9 7 6 Port /8 Port / 6 7 8 9 Solenoid and Connector included. Manifolds and Accessories ordered separately, refer to page.. For other options, consult ROSS. Valves available with installed prewired connectors, please consult ROSS. STANDARD SPECIFICATIONS (for valves on this page): Construction Design Mounting Type Solenoids Spool Inline or manifold mounted AC or DC power; Rated for continuous duty Voltage volts DC: volts AC, /6 Hz Power Consumption (each solenoid). watts on DC;.6 VA holding on /6 Hz Enclosure Rating IP 6, IEC 69 Port Size /8: MICRO-MINI EN 7-8 connector Electrical Connection Port Size / & /8: EN 7-8 Industrial Form connector Temperature Ambient/Media: to F ( to 6 C) Flow Media Filtered air Pilot Supply Internal Operating Pressure. to psig (. to bar) Valve ody: ar Stock Aluminum Construction Material Spool: Stainless Steel Seals: una-n Manual Override Pushbutton, non-locking Rev. 6/7/8.
Double Solenoid Pilot Controlled Valves 9 Series Port Size -Way -Position Valves, Double Solenoid, Spring Center Power Center Closed Center Open Center Valve Model Number# Valve Model Number# Valve Model Number#,,, SPP SPP SPP Avg. C V Weight lb (kg) /8 /8 977K9Z D977K9Z 977KZ D977KZ 977K7Z D977K7Z.7.7 (.) / /8 977K9Z D977K9Z 977KZ D977KZ 977K7Z D977K7Z..6 (.7) /8 /8 977K9Z D977K9Z 977KZ D977KZ 977K7Z D977K7Z..7 (.78) / / 977K9Z D977K9Z 977KZ D977KZ 977K7Z D977K7Z.. (.9) # Voltage: Z=- VAC, /6 Hz; W= VDC, e.g., 977K9W. Power Center Closed Center Open Center Valve Dimensions inches (mm) Port Size /8.7 (8.). (.).7 (8.).7 (.).7 (.) 6.7 (6.) /8 (-Port) -Ø. (.) /8 (, -Port).9 (.).9 (.) 6.7 (7.). (8.).8 (.) -Ø. (.) /8 (, -Port). (.7) Port Size /.9 (.).7. (7.) (.).78 (.). (6.) / (-Port).9 (.) 7.87 (.).78 (.) 7.7 (9.) -Ø.7 (.) / (, -Port).9 (.) /8 (, -Port).6 (67.) Port Size /8.9 (.).7 (.) - Ø.7 (.) Port Size /. (8.).6 (.) - Ø.7 (.). (.).9 (.).79 (.).8 (.) 8.9 (7.).6 (7.) /8 (, -Port) -Ø.7 (.).9 (.).8 (7.).9 (.). (6.).7 (.). (.).9 (9.).8 (.) / (, -Port) - Ø.7 (.).9 (.).9 (7.) /8 (-Port) 8.6 (9.) /8 (, -Port) / (-Port) 9.9 (.) / (, -Port) 7 7 Port /8 6 7 8 9 6 8 FLOW CHARTS Port / 6 7 8 9 Port /8 /8 6 7 8 9 Solenoid and Connector included. Manifolds and Accessories ordered separately, refer to page.. For other options, consult ROSS. Valves available with installed prewired connectors, please consult ROSS. STANDARD SPECIFICATIONS (for valves on this page): Construction Design Mounting Type Solenoids Spool Inline or manifold mounted AC or DC power; Rated for continuous duty Voltage volts DC: volts AC, /6 Hz Power Consumption (each solenoid). watts on DC;.6 VA holding on /6 Hz Enclosure Rating IP 6, IEC 69 Port Size /8: MICRO-MINI EN 7-8 connector Electrical Connection Port Size / & /8: EN 7-8 Industrial Form connector Temperature Ambient/Media: to F ( to 6 C) Flow Media Filtered air Pilot Supply Internal Operating Pressure. to psig (. to bar) Valve ody: ar Stock Aluminum Construction Material Spool: Stainless Steel Seals: una-n Manual Override Pushbutton, non-locking.6 ROSS CONTROLS. All Rights Reserved. Rev. 6/7/8
Single Pressure Controlled Valves 9 Series -Way -Position Valves, Single Pilot, Spring Return Port Size Signal Port Thread Normally Closed Valve Model Number Normally Open Valve Model Number, SPP SPP Avg. C V Weight lb (kg) /8 /8 - UNF 9K D9K 9K D9K.9.6 (.) / / /8 9K D9K 9K D9K.. (.) /8 /8 /8 9K D9K 9K D9K.6.86 (.9) Normally Closed Normally Open Valve Dimensions inches (mm) Port Size /8 Port Size / Port Size /8.(.).7(8.) OUT /8 (-Port). (8.).8 (.).9 (.) A (). (6.) -Ø. (.) - UNF (M) External /8 (,-Port).66 (7.). (6.).78 (.) -Ø.7 (.). (.) OUT.7 (9.) A ().6 (66.).8 (7.) /8 External / (-Port) / (,-Port).9 (.)..9 (.) (.).79 (.).6 (7.). (6.) OUT. (.) A ().6 (9.) /8 (-Port) -Ø.7 (.).9 (.) /8 External /8 (,-Port) 7 7 Port /8 6 7 8 9 6 8 FLOW CHARTS Port / 6 7 8 9 Port /8 6 7 8 9 Manifolds and Accessories ordered separately, refer to page.. For other options, consult ROSS. STANDARD SPECIFICATIONS (for valves on this page): Construction Design Mounting Type Temperature Flow Media Pilot Supply Spool Inline or manifold mounted Ambient/Media: to F ( to 6 C) Filtered air External. to psig (. to bar) Operating Pressure Pilot supply pressure must be equal to or greater than inlet pressure. Valve ody: ar Stock Aluminum Construction Material Spool: Stainless Steel Seals: una-n Manual Override Pushbutton, non-locking Rev. 6/7/8.7
Single Pilot Pressure Controlled Valves 9 Series -Way -Position Valves, Single Pilot, Spring Return Port Size Signal Port Valve Model Number,,, Thread SPP Avg. C V Weight lb (kg) /8 /8 /8 96K D96K.9.6 (.) / /8 /8 96K D96K..8 (.) /8 /8 /8 96K D96K.6. (.6) / / /8 96K D96K..9 (.6) Valve Dimensions inches (mm) Port Size /8. (.).7(8.). (.). (.) /8 (, -Port) -Ø. (.) - UNF (M) External Port Size / / (, -Port). (6.).78 (.). (8.) -Ø.7 (.).9 (.).86 (.) /8 External. (8.).8 (.) -Ø. (.). (76.) /8 (-Port) /8 (, -Port). (.).7 (7.) -Ø.7 (.). (8.) / (-Port) /8 (, -Port) Port Size /8..9 (.)(.).79 (.) 6. /8 (, -Port).6 (.) -Ø.7 (.).86 (.) /8 External -Ø.7 (.).8 (.) Port Size / / (, -Port). (6.). (.). (7.) -Ø.7 (.).86 (.) /8 External -Ø.7 (.).8 (.). (.) /8 (-Port) /8 (, -Port) -Ø.7 (.). (.) / (-Port) / (, -Port) FLOW CHARTS 6 8 Port /8 Port / 6 7 8 9 7 6 Port /8 Port / 6 7 8 9 Manifolds and Accessories ordered separately, refer to page.. For other options, consult ROSS. STANDARD SPECIFICATIONS (for valves on this page): Construction Design Mounting Type Temperature Flow Media Pilot Supply Spool Inline or manifold mounted Ambient/Media: to F ( to 6 C) Filtered air External. to psig (. to bar) Operating Pressure Pilot supply pressure must be equal to or greater than inlet pressure. Valve ody: ar Stock Aluminum Construction Material Spool: Stainless Steel Seals: una-n Manual Override Pushbutton, non-locking.8 ROSS CONTROLS. All Rights Reserved. Rev. 6/7/8
Double Pressure Controlled Valves 9 Series -Way -Position Valves, Double Pilot, Detented Port Size Signal Port Valve Model Number,,, Thread SPP Avg. C V Weight lb (kg) /8 /8 /8 96K D96K.9. (.) / /8 /8 96K D96K..9 (.7) /8 /8 /8 96K D96K.6.7 (.9) / / /8 96K D96K.. (.7) Valve Dimensions inches (mm) Port Size /8 /8 (, -Port).7 (8.). (.). (.) -Ø. (.) - UNF (M) External Port Size / / (, -Port). (6.).78 (.).9 (.) -Ø.7 (.).86 (.) /8 External. (8.).8 (.) -Ø. (.).6 (9.) /8 (-Port) /8 (, -Port). (.).7 (7.) /8 (, -Port).78 (.). (.) / (-Port) Port Size /8 Port Size / / (, -Port)..9 (.) (.) /8 (, -Port).79 (.).6(.) -Ø.7 (.).86 (.) /8 External.8 (.). (6.). (.).86 (.) /8 External.8 (.) /8 (, -Port).6 (8.) /8 (-Port) / (-Port) 6. (.) / (, -Port) FLOW CHARTS 6 8 Port /8 Port / 6 7 8 9 7 6 Port /8 Port / 6 7 8 9 Manifolds and Accessories ordered separately, refer to page.. For other options, consult ROSS. STANDARD SPECIFICATIONS (for valves on this page): Construction Design Mounting Type Temperature Flow Media Pilot Supply Spool Inline or manifold mounted Ambient/Media: to F ( to 6 C) Filtered air External. to psig (. to bar) Operating Pressure Pilot supply pressure must be equal to or greater than inlet pressure. Valve ody: ar Stock Aluminum Construction Material Spool: Stainless Steel Seals: una-n Manual Override Pushbutton, non-locking Rev. 6/7/8.9
Double Pressure Controlled Valves 9 Series -Way -Position Valves, Double Pilot, Spring Center Power Center Closed Center Open Center Port Size Signal Port Valve Model Number Valve Model Number Valve Model Number Thread,,, SPP SPP SPP Avg. C V Weight lb (kg) /8 /8 - UNF 97K9 D97K9 97K D97K 97K7 D97K7.7.8 (.7) / /8 /8 97K9 D97K9 977K D977K 97K7 D97K7.. (.) /8 /8 /8 97K9 D97K9 97K D97K 97K7 D97K7..9 (.6) / / /8 97K9 D97K9 97K D97K 97K7 D97K7..98 (.9) Power Center Closed Center Open Center Valve Dimensions inches (mm) Port Size /8.7(8.). (.). (8.).8 (.). (.) -Ø. (.) /8 (, -Port).99 (.) - UNF (M) External.7 (.) -Ø. (.) /8 (-Port) /8 (, -Port) Port Size /..78 (6.) (.) / (, -Port).7. (7.) (.) / (-Port).9 (.). (.).9 (.) -Ø.7 (.).78 (.).86 (.) /8 External /8 (, -Port) Port Size /8.9 (.).6(.) /8 External Pilot Supply -Ø.7 (.) /8 (, -Port).86. (.) (.).79.8 (.) (.) Port Size / /8 External Pilot Supply.8 (.) - Ø.7 (.) / (, -Port) - Ø.7 (.).86 (.). (6.). (.).8 (.) /8 (-Port) 7. (79.) /8 (, -Port) / (-Port) 7. (79.) / (, -Port) FLOW CHARTS 6 8 Port /8 Port / 6 7 8 9 7 6 Port /8 Port / 6 7 8 9 Manifolds and Accessories ordered separately, refer to page.. For other options, consult ROSS. STANDARD SPECIFICATIONS (for valves on this page): Construction Design Mounting Type Temperature Flow Media Pilot Supply Spool Inline or manifold mounted Ambient/Media: to F ( to 6 C) Filtered air External to psig ( to bar) Operating Pressure Pilot supply pressure must be equal to or greater than inlet pressure. Valve ody: ar Stock Aluminum Construction Material Spool: Stainless Steel Seals: una-n Manual Override Pushbutton, non-locking. ROSS CONTROLS. All Rights Reserved. Rev. 6/7/8
Slim-Line Manifold ase for /- Spring Return or Detented Valves for 9 Series Manifold ases for / Valves Valve Port Size ase Port Size,,, Valves Unit Valves Unit 6 Valves Unit 8 Valves Unit Valves Unit Model Number Model Number Model Number Model Number Model Number SPP SPP SPP SPP SPP /8 / 7H9 D7H9 7H9 D7H9 76H9 D76H9 78H9 D78H9 8H9 D8H9 / / 9H9 D9H9 9H9 D9H9 96H9 D96H9 98H9 D98H9 H9 DH9 Valve ase Numbers of Valves Unit Port Size Port Size ase 6 8 Dimensions,,, Dimensions inches (mm) Height.98 ().98 ().98 ().98 ().98 () /8 / Length (A). (9).8 (97). () 6.8 (7) 8. () Length ().8 (7). (8).8 () 6. (6) 7.8 (99) Width.6 ().6 ().6 ().6 ().6 () Height.6 (7).6 (7).6 (7).6 (7).6 (7) / / Length (A). (77).6 () 7.8 (8) 9. (9). (9) Length ().6 (66).7 () 6.8 (7) 8.98 (8). (8) Width.97 ().97 ().97 ().97 ().97 () Width A Height MANIFOLD LANKING KITS Valve Port Size Kit Number /8 8H77 / 8H77 Manifold blanking kits incude: blanking plate, manifold gasket and mounting bolts. Manifold Gasket lanking Plate Accessories & Options Electrical Connectors Connector Form Valve Port Size Model Number* Volts DC Volts AC EN 7-8 MICRO-MINI /8 766L77 78L77 EN 7-8 Industrial Form connector /, /8 767L77 78L77 *-Pin Electrical Connectors with LED & Surge Suppressor Silencers Port Size Thread Type Model Number Avg. Dimensions inches (mm) Weight C V lb (kg) SPT Width Length /8 Male A DA..9 (). (). (.) / Male A DA..9 (). (). (.) /8 Male A DA.7.9 (). (). (.) Pressure Range: to 9 psig ( to bar) maximum. Flow Media: Filtered air. Rev. 6/7/8.
Slim-Line Manifold ase for / & /- Spring Return or Detented Valves for 9 Series Manifold ases for / & / Valves Valve Port Size ase Port Size,,,,, Valves Unit Valves Unit 6 Valves Unit 8 Valves Unit Valves Unit Model Number Model Number Model Number Model Number Model Number SPP SPP SPP SPP /8 /8 / 9H9 D9H9 9H9 D9H9 96H9 D96H9 98H9 D98H9 98H9 D98H9 / /8 / H9 DH9 H9 DH9 6H9 D6H9 8H9 D8H9 8H9 D8H9 /8 /8 /8 H9 DH9 H9 DH9 6H9 D6H9 8H9 D8H9 8H9 D8H9 / / / 6H9 D6H9 6H9 D6H9 66H9 D66H9 68H9 D68H9 68H9 D68H9 SPP Valve ase Numbers of Valves Unit Port Size Port Size ase 6 8 Dimensions,,,,, Dimensions inches (mm) Height. (6). (6). (6). (6). (6) /8 /8 / Length (A). (9).8 (97). () 6.8 (7) 8. () Length ().8 (7). (8).8 () 6. (6) 7.8 (99) Width. (). (). (). (). () Height.6 (7).6 (7).6 (7).6 (7).6 (7) / /8 / Length (A).9 (8.). (8.) 7.6 (9.) 9.78 (8.).9 (.) Length ().8 (7.).98 (6.) 7. (8.) 9. (6.) 7.9 (.) Width.68 (68).68 (68).68 (68).68 (68).68 (68) Height.8 ().8 ().8 ().8 ().8 () /8 /8 /8 Length (A).66 (9) 6.6 (9) 8.86 ().6(9). (7) Length (). (8).7 (6) 8. ().9 (78). () Width. (87). (87). (87). (87). (87) Height. (.). (.). (.). (.). (.) / / / Length (A). () 7. (78) 9.96 ().9 (8).87 () Length ().6 (88) 6. (6) 9.7 (8). ().7 (88) Width.86 (98).86 (98).86 (98).86 (98).86 (98) Width A Height Valve Port Size Model Number MANIFOLD LANKING KITS /8 86H77 / 87H77 /8 88H77 Manifold blanking kits incude blanking plate, manifold gasket and mounting bolts. / 89H77 Manifold Gasket lanking Plate Accessories & Options Electrical Connectors Connector Form Valve Model Number* Port Size Volts DC Volts AC EN 7-8 Form A MICRO-MINI /8 766L77 78L77 EN 7-8 Industrial Form connector /, /8, / 767L77 78L77 *-Pin Electrical Connectors with LED & Surge Suppressor Silencers Port Size Thread Type Model Number Avg. Dimensions inches (mm) Weight SPT C V Width Length lb (kg) /8 Male A DA..9 (). (). (.) / Male A DA..9 (). (). (.) /8 Male A DA.7.9 (). (). (.) / Male A DA.7. ().6 (9). (.) Pressure Range: to 9 psig ( to bar) maximum. Flow Media: Filtered air.. ROSS CONTROLS. All Rights Reserved. Rev. 6/7/8
General Information Standard Specifications The standard specifications for the products on each page of this catalog are given on the same page or referenced. For solenoid pilot valves, models with internal are listed. Most models are also available for use with external or have a built-in pilot supply selector valve. The products in this catalog are intended for use in industrial pneumatic systems. Most products are adaptable to other uses and conditions not covered by the standard specifications given in this catalog. Weights shown are approximate and are subject to change. Dimensions given, unless otherwise noted, are envelope dimensions (not for mounting). Consult ROSS for further information. Port Ports of valves and bases described in this catalog have (ANSI.) threads. Other thread types can be specified by putting an appropriate prefix letter on the model or part number when ordering. Thread Types by Model Prefix Letter Pneumatic Port Prefix Threaded Electrical Letter Opening (ANSI.) None ISO 8 - DIN 9 Parallel, SPP # C* ISO 8 - DIN 9 Parallel, SPP # D G ISO 8 - JIS Tapered # J ISO SAE 96- ISO 96 S * Used only for filters, regulators, lubricators. # ISO 8 threads superseds SPP, G and JIS thread types. Flow Ratings Flow ratings are expressed as C V where C V = corresponds to a steady state air flow of approximately scfm under the following conditions: Inlet pressure = psig (6.7 bar) Pressure drop = psi (.69 bar) Air temperature = 68 F ( C) Relative humidity = 6% Note: ecause widely differing test standards are used to measure C V values, the figures given in this catalog should not be used to compare ROSS valves with those of other makers. The C V ratings given here are intended only for use with performance charts published by ROSS. The C V ratings are averages for the various flow paths through the valve and are for steady flow conditions. Approvals and Certifications ROSS products are designed to meet a number of industrial standards, including the Canadian Standards Association (C.S.A.) guidelines. For more information on specific product approvals, contact your local distributor or ROSS. Solenoids All ROSS standard solenoids are rated for continuous duty (unless noted otherwise) and will operate the valve within the air pressure range specified in this catalog. Explosion-Proof Solenoid Pilot available, for more information consult ROSS. Voltage & Hertz When ordering a solenoid valve, also specify the desired solenoid voltage and hertz. Voltage Types by Model Suffix Letter Voltage Suffix Letter volts AC Z volts AC Y volts DC H volts DC W 8 volts DC M 9 volts DC K volts DC P volts DC C Recommended Solenoid Voltages: - volts AC, Hz; - volts AC, 6 Hz; volts DC; volts DC. In addition, the following voltages are available:, volts AC, Hz,, 8 volts AC, 6 Hz, 8, volts AC, Hz volts AC, 6 Hz, volts AC, Hz, volts AC, 6 Hz. For example: Model 77, volts AC, 6 Hz. Model W676, volts AC, Hz. For additional information or help with voltage configuration, please contact your local distributor or ROSS. Port Identification Valve symbols in this catalog conform to the ISO 9-:99 standard of the International Organization for Standardization (ISO) and the SAE J standard of the Society of Automotive Engineers (SAE) respectively. Information or Technical Assistance For additional information or application assistance concerning ROSS products, consult ROSS or your local ROSS distributor (see contact information on the back cover). Order Placement For order placement, consult ROSS or your local ROSS distributor. For a current list of countries and local distributors, visit ROSS website at www.. Rev. /7/7
CAUTIONS, WARNINGS and STANDARD WARRANTY PRE-INSTALLATION or SERVICE. efore servicing a valve or other pneumatic component, be sure that all sources of energy are turned off, the entire pneumatic system is shut off and exhausted, and all power sources are locked out (ref: OSHA 9.7, EN 7).. All ROSS products, including service kits and parts, should be installed and/or serviced only by persons having training and experience with pneumatic equipment. ecause any installation can be tampered with or need servicing after installation, persons responsible for the safety of others or the care of equipment must check every installation on a regular basis and perform all necessary maintenance.. All applicable instructions should be read and complied with before using any fluid power system in order to prevent harm to persons or equipment. In addition, overhauled or serviced valves must be functionally tested prior to installation and use. If you have any questions, call your nearest ROSS location listed on the cover of this document.. Each ROSS product should be used within its specification limits. In addition, use only ROSS parts to repair ROSS products. WARNING: Failure to follow these directions can adversely affect the performance of the product or result in the potential for human injury or damage to property. FILTRATION and LURICATION. Dirt, scale, moisture, etc. are present in virtually every air system. Although some valves are more tolerant of these contaminants than others, best performance will be realized if a filter is installed to clean the air supply, thus preventing contaminants from interfering with the proper performance of the equipment. ROSS recommends a filter with a -micron rating for normal applications. 6. All standard ROSS filters and lubricators with polycarbonate plastic bowls are designed for compressed air applications only. Do not fail to use the metal bowl guard, where provided, to minimize danger from high pressure fragmentation in the event of bowl failure. Do not expose these products to certain fluids, such as alcohol or liquefied petroleum gas, as they can cause bowls to rupture, creating a combustible condition, hazardous leakage, and the potential for human injury or damage to property. Immediately replace a crazed, cracked, or deteriorated bowl. When bowl gets dirty, replace it or wipe it with a clean dry cloth. 7. Only use lubricants which are compatible with materials used in the valves and other components in the system. Normally, compatible lubricants are petroleum based oils with oxidation inhibitors, an aniline point between 8 F (8 C) and F ( C), and an ISO, or lighter, viscosity. Avoid oils with phosphate type additives which can harm polyurethane components, potentially leading to valve failure which risks human injury, and/or damage to property. AVOID INTAKE/EXHAUST RESTRICTION 8. Do not restrict the air flow in the supply line. To do so could reduce the pressure of the supply air below the minimum requirements for the valve and thereby cause erratic action. 9. Do not restrict a valve s exhaust port as this can adversely affect its operation. Exhaust silencers must be resistant to clogging and must have flow capacities at least as great as the exhaust capacities of the valves. Contamination of the silencer can result in reduced flow and increased back pressure. WARNING: ROSS expressly disclaims all warranties and responsibility for any unsatisfactory performance or injuries caused by the use of the wrong type, wrong size, or an inadequately maintained silencer installed with a ROSS product. POWER PRESSES. Mechanical power presses and other potentially hazardous machinery using a pneumatically controlled clutch and brake mechanism must use a press control double valve with a monitoring device. A double valve without a self-contained monitoring device should be used only in conjunction with a control system which assures monitoring of the valve. All double valve installations involving hazardous applications should incorporate a monitoring system which inhibits further operation of the valve and machine in the event of a failure within the valve mechanism. ENERGY ISOLATION/EMERGENCY STOP. Per specifications and regulations, ROSS L-O-X and L-O-X with EEZ-ON operation products are defined as energy isolation devices, NOT AS EMERGENCY STOP DEVICES. All products sold by ROSS CONTROLS are warranted for a one-year period [with the exception of all Filters, Regulators and Lubricators ( FRLs ) which are STANDARD WARRANTY warranted for a period of seven years] from the date of purchase to be free of defects in material and workmanship. ROSS obligation under this warranty is limited to repair or replacement of the product or refund of the purchase price paid solely at the discretion of ROSS and provided such product is returned to ROSS freight prepaid and upon examination by ROSS is found to be defective. This warranty becomes void in the event that product has been subject to misuse, misapplication, improper maintenance, modification or tampering. THE WARRANTY EXPRESSED AOVE IS IN LIEU OF AND EXCLUSIVE OF ALL OTHER WARRANTIES AND ROSS EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES EITHER EXPRESSED OR IMPLIED WITH RESPECT TO MERCHANTAILITY OR FITNESS FOR A PARTICULAR PURPOSE. ROSS MAKES NO WARRANTY WITH RESPECT TO ITS PRODUCTS MEETING THE PROVISIONS OF ANY GOVERNMENTAL OCCUPATIONAL SAFETY AND/OR HEALTH LAWS OR REGULATIONS. IN NO EVENT IS ROSS LIALE TO PURCHASER, USER, THEIR EMPLOYEES OR OTHERS FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM A REACH OF THE WARRANTY DESCRIED AOVE OR THE USE OR MISUSE OF THE PRODUCTS. NO STATEMENT OF ANY REPRESENTATIVE OR EMPLOYEE OF ROSS MAY EXTEND THE LIAILITY OF ROSS AS SET FORTH HEREIN. Rev. /7/7 www.
Americas U.S.A. ROSS CONTROLS +-8-76-8 sales@ Customer Service -8-GET-ROSS (8-8) Technical Service -888-TEK-ROSS (8-7677) Canada ROSS CANADA +-6--7677 sales@rosscanada.com rosscanada.com 6777 CANADA INC. An Independent Representative razil ROSS SOUTH AMERICA Ltda. +--- vendas@.br Europe Germany ROSS EUROPA GmbH +9-6-797- sales@rosseuropa.com rosseuropa.com United Kingdom ROSS UK Ltd. +--679 sales.uk@ rossuk.co.uk France ROSS FRANCE SAS +--9--6-6 sales@rossfrance.com rossfrance.com Asia & Pacific Japan ROSS ASIA K.K. +8--778-7 custsvc.ra@ rossasia.co.jp India ROSS CONTROLS INDIA Pvt. Ltd. +9--6-9 sales.ri@ China ROSS CONTROLS (CHINA) Ltd. +86--69-796 sales.cn@ rosscontrolschina.com Full-Service Global Locations There are ROSS Distributors Throughout the World To meet your requirements across the globe, ROSS distributors are located throughout the world. Through ROSS or its distributors, guidance is available for the selection of ROSS products, both for those using pneumatic components for the first time and those designing complex systems. Other literature is available for engineering, maintenance, and service requirements. If you need products or specifications not shown in this catalog, please visit ROSS' website, contact ROSS or your ROSS distributor. The ROSS Support Team will be happy to assist you in selecting the best product for your application. For a current list of countries and local distributors, visit ROSS at. U.S.A. - Content subject to change. l 8, ROSS CONTROLS. All Rights Reserved. l Form ROSS-InlineDirect