HENGLI HYDRAULIC Excellent Performance and High Efficiency Create More Value HP Series Piston Pump HM Series Motor Efficient - Quality - Reliable www.henglihydraulic.com
Efficiency and Reliability Create Higher Productivity HP Series Axial Variable Displacement Piston Pump The HP series axial variable displacement piston pump designed and manufactured by Hengli Hydraulic adopts the swash plate design and can be applied in hydraulic open circuit. Our pump can meet various control and drive application requirements in medium and high pressure heavy load conditions. The displacement ranges from 28~140cm3/rev combines with various control options such as flow control, pressure control, power control, etc, makes our pump more flexible according to the application requirements. Features High continuous pressure Excellent self-priming capability Excellent reliability and long service life Low pressure pulsation and low noise High power to weight ratio Various control options Optional through drive Quick control response HP3V Series Size Displacement cc/rev Rated Pressure Peak Pressure Max. self-priming r/min 80 80 320 350 2400 125 125 350 400 2200 140 140 350 400 2150 Control options: Load-sensing, pressure control, constant torque control, variable power control, electric proportional displacement control. HP5V Series (more compact structure, lighter weight, longer service life) Size Displacement cc/rev Rated Pressure Peak Pressure Control options: Load-sensing, pressure control, electric proportional pressure control, constant torque control, variable power control. Max. self-priming r/min 28 28 320 350 3000 45 45 320 350 2700 60 60 250 280 2400 76 76 320 350 2400 85 85 280 320 2400 105 105 320 350 2200
Upgraded Hengli II Generation Swash Plate Axial Piston Pump Comparison between HP5V series piston pump and similar piston pump on the market Maximized power density ratio and efficiency Continuous working pressure:320, peak pressure: 350. Compact structure contributes to 25% less weight. Power density ratio increased around 29%. Spherical control plate structure, high anti- contamination ability, high volumetric efficiency. Features Various electro-hydraulic control options: electrical proportional displacement control, pressure control, torque control etc. Front and rear heavy-duty bearings with an average service life of up to 10,000 hours. Optimized oil flow channel, around 0.5dB lower noise. HL A Type K Type HP5V Weight HL Rated Working Pressure 350 300 250 200 150 100 50 0 Rated Pressure 28 % Weight 25 % HL Power Density Ratio A Type K Type HP5V Hydraulic Schematics Applications PL Excavating Machinery Efficient and reliable, durable, more value. P Pr T3 P PA T Power valve LS 阀 Pressure cut -off valve T2 Aerial Work Plateform Compact lightweight design to meet the requirements of limited space installation. Piling Machinery Lower energy consumption; meet the harsh operating condition requirements. Lifting Machinery Satisfy heavy load requirements and provide higher work efficiency. Handling Machinery Various control options provide precise control. T1 S Tunnel Machinery Reliable and durable, meet the high temperature and high humidity working condition requirements.
Powerful and Suitable for Compact Space Installation HM3V Series Variable Displacement Motor High flexibility, excellent maneuverability, reliability and stability, easy maintenance are the necessary requirements for mobile applications like aerial work platform and handling machinery. Our HM3V series variable displacement piston motor is exactly the one designed for these requirements: high flexibility, low noise level, small size and easy installation. Together with our Hengli control valve, hydraulic pump and the mature mobile machinery system solution your overall performance will be improved in terms of performance, efficiency and safety. Handling Machinery Aerial Work Platform
Mature Mobile Application Solution HM3V Series Variable Displacement Piston Motor The Hengli HM3V series hydraulic motor is a medium-load, two-position variable axial piston motor with integrated variable setting piston. The HM3V variable motor can be applied to open or closed hydraulic transmission circuits. The features like cartridge design, small size, light weight, displacement range from 25~45cc/rev and the oil port position on the side of the motor layout, are suitable for applications for aerial work platform and Handling machinery, which are with limited installation and oil piping system space. Features High total efficiency. Cartridge design for easy installation at wheel side. Two-position variable motor, able to set the minimum motor displacement. Concentrated side of motor ports for convenient installation. Piston motor for open or close circuit. Technical Data Size Displacement cc/rev Rated Pressure Peak Pressure Max. self-priming r/min HM3V-25 25 210 415 3400 HM3V-30 30 175 350 3500 HM3V-38 38 210 415 3600 HM3V-45 45 175 350 3500 Hydraulic Schematics M1 X1 A T MIN Control Pressure Min Pressure() 14 Max Pressure() 69 B L2 Housing Pressure Rated Pressure() 2 Max Pressure() 6 M2 L1 1 Two-position variable motor, the initial working position of the motor is the maximum displacement, which is maintained by position of Offsetting spring. Through the oil control, the motor can be switched to the minimum displacement. 2 The brake pressure release oil channel, which will not influence the internal oil channel, is casted in the housing. Through this channel, the released pressure oil from external brake can be connected to the brake release port of the gear reducer. 3 In open circuit, the motor outlet can maintain a certain back pressure to ensure that the internal components of the motor are lubricated and working properly. The pressure on the low pressure side of the system should be kept above 3.
Excellent Efficiency to improve the Overall Productivity HM5X Series Fixed Displacement Piston Motor The Hengli HM5X series hydraulic motor is fixed displacement swash-plate motor with high compact design. The mechanical brake and the auxiliary valves are highly integrated around the rotating parts. The specially designed mounting flange allows a direct connection to the gear reducer and suitable for high pressure open and close circuit. Features High compact design with integrated rotating parts, breaking parts and auxiliary relief valve, charge valve and anti-reverse valve ect. Special design of the mounting flange, can be directly connected to the gear reducer. Light weight, compact design contribute to improve the output power. Piston motor for open or close circuit. Technical Data Size Displacement cc/rev Rated Pressure Peak Pressure Max. self-priming r/min HM5X-027 27.2 206 250 1590 HM5X-130 129.2 324 392 1850 HM5X-180 180.1 324 392 1680 Hydraulic Schematics DB Size HM5X-027 HM5X-130 HM5X-180 Braking Pilot Pressure Common Working Pressure() 15 34 33 M Max Pressure() 39 49 49 Housing Pressure Rated Pressure() 1 2 2 Max Pressure() 3 6 6 A B The HM5X motor is a compact designed fixed displacement piston motor with integrated parts such as brake, relief valve, charge valve, anti-reverse valve etc. This motor is developed for the rotary motions and can be applied for machinery such as excavators, rotary drilling rigs and concrete mixers ect.
Mature Technology brings More Value HM5X Series Fixed Displacement Piston Motor As a key component of the excavating and rotary drilling machinery rotary mechanism, the performance of the rotary motor will affect the machine s rotation speed, driving torque, rotary parking and brake performance, which eventually determines the productivity of the machine. The Hengli HM5X series fixed displacement swash plate piston motor is developed based on mature technology and has improvement in light weight and compact design, which help to improve the output power and excellent and reliable performance. Together with our Hengli control valve, hydraulic pump, mobile machinery system solution help improve the overall performance in terms of performance, efficiency, thus bringing our customer more economic benefits. Excavating Machinery Rotary Drilling Rig
HENGLI HYDRAULIC As a benchmarking company of Chinese high-end hydraulic transmission industry, Hengli Hydraulic is always devoting to the innovation and development in the following four areas: production design, manufacturing process, quality improvement and management improvement. We, Hengli Hydraulic, is making effort to realize the intelligent manufacture at the same time the high-efficiency and energy saving of the hydraulic components and try to reshape the Made in China image through technology innovation. Meanwhile we are committed to creating a new pattern of the world's hydraulics industry and contribute to global technological innovation. Hengli Hydraulic is dedicated to designing and developing hydraulic transmission products and solutions that meet the real needs of local customers for the global market based on the diverse market demands, in particular the field of mobile machinery and tunnel engineering. We, Hengli Hydraulic, take advantage of our years of application experience to provide the customer the most optimized solutions, thus establish strong partnerships with our customers and maintain a sustainable development in a competitive market. What we provide Hydraulic Cylinder Hydraulic Piston Pump & Motor Hydraulic Control Valve for Mobile Machinery Industrial Valve Hydraulic Pump Unit and System High performance Hydraulic Test Bench High-precision Casting Pneumatic Components and integrated System Cold-drawn Seamless Steel Pipe Surface Coating-Thermal Spray Treatment For more detailed information, please visit our website at www.henglihydraulic.com We are looking forward to working with you! CHINA No.99 Longqian Road,Wujin District, Changzhou 213167 TEL +86 400 101 8889 E-mail hengli@ henglihydraulic.com GERMANY Sperenberger Str. 13 12277 Berlin TEL: +49 172 368 3463 E-mail: jacky.ding@henglihydraulic.com AMERICA 580 Crossroads Parkway, Bolingbrook Illinois 60440 TEL +01 630 995 3674 E-mail: sales@hengliamerica.com JAPAN 3F, Takakuwa building1-18-13 Hamamatsu-cho Minato-ku,Tokyo,105-0013 TEL +81 03 6809 1696 E-mail: hl_zhaozhen@163.com Hengli Hydraulic assumes no responsibility for errors that may exist in brochures, product manuals and other publications. Our products are in continuously development and innovation. Applications information in this brochure is not limited to special condition or applicability in particular industry. Trademarks with Hengli,, SHLIXIN, LIXIN, and InLine are all owned by Jiangsu Hengli Hydraulic Co., Ltd. and its subsidiaries and affiliates. Unauthorized use of the above trademarks and the contents of this brochure are prohibited. Hengli Hydraulic 2018 EN Print date 04/2018