Stainless Steel, /"-" Advantages / Benefits Ultra compact design - Low weight Automatic self-adjustment of basic parameters Integrated PID controller User-friendly operation - LCD display - Keypad interface - Easy-to-understand menu-guided programming Code protection against unauthorized access Maintenance-free packing glands certified Design The Type 63 is a stainless steel control valve with an electropneumatically operated positioner. The Type 067 positioner consists of three main parts: the valve stem position pickup, the electropneumatic control system and the micro-processor electronics. The valve stem position pickup, a linear potentiometer connected to the valve stem, feeds back the actual stem position to the positioner electronics. The micro-processor electronics compares the actual stem position to the set point given by a standard signal (4-0mA, 0-0V, ). In the case of a position difference, the electropneumatic control system corrects the stem position until the set point is reached. The Type 067 positioner also features a built-in process controller for the control of flow, temperature, pressure, etc. - Programmable flow curves: linear equal percentage freely programmable - No air consumption at steadystate conditions - Excellent flow characteristic combined with high flow rates - Integrated PID-Controller - Captured exhaust air - Direct mounting, no tubing between positioner and valve - Flanged, NPT or Tri-Clamp connections Applications Textile dyeing and bleaching Food processing Chemical industry Water treatment General processing industry Burkert Contromatic USA 60 McGaw Avenue Irvine, CA 964 Tel. 949.3.300 Fax 949.3.398 www.burkert-usa.com Burkert Contromatic Inc. 760 Pacific Road, Unit 3 Oakville, Ontario, Canada L6L 6M5 Tel. 905.847.5566 Fax 905.847.9006 www.burkert.ca Fluid Control Systems
Technical Data Positioner Type 067 Electrical Data Voltage supply: Power consumption: Signal input for positioner: Binary input: Connection: Pneumatic Data Instrument air: Air performance Air inlet valve: C v =.035 Exhaust valve: C v =.04 Internal air consumption at steady-state condition: Connection: 4 V DC < 0 W Unit signal: 4 0 ma 0 0 ma 0 0 V Configurable as normally open or closed contact Terminal strip Cable gland x PG 9 Filtered compressed air, lubricated or nonlubricated Zero Female pipe thread, G /8' Positioner Data Overall dimensions: 5" x 3." x 3" Body material: Aluminum, laquered Fluid plate material: Aluminum, anodized Weight of positioner: Approx.. lbs Rating: NEMA 4 (IP 65) Operating temperature: 3 F to 40 F Technical Data Control Valve 63 Valve Size: /", ", ", -/4", -/", " Connection: 50# ANSI raised face flange, NPT, Tri-Clamp Control range: More than 50: Flow characteristic: Modified equal percentage Flow capacity: See table below Fluid temperature: +4 F to +356 F Max. Operating pressure: 30 PSI (at ambient temperature) Actuator Actuator piston dia.: See table page 4 or 6 Supply pressure: 65 PSI, min. 85 PSI, max. Function: Leakage class: Normally closed. Flowdirection under seat. According to ANSI B 6-04 Class IV (Stainless steel seat and stainless steel plug) Specifications - Flow Capacity Plug travel [%] -value /" 3 /4" " -/4" -/" " 0 0 0.07 0.5 0.47.7. 3.50 0 0.7 0.37.8 3.03 6.5 0.49 30 0.33 0.93.45 5.94.77 8.64 40 0.5.86 4.9 0.0 0.04 30.9 50 0.77 3.03 7. 6.08 8.08 40.78 60.9 4.3 0.83.4 34.0 48.93 70.79 5.59 3.86 4.47 39.03 57.09 80.53 6.76 5.73 5.63 4.36 64.08 90 3.5 8.6 6.54 6.80 4.87 67.57 00 4.43 8.50 6.89 7.38 43. 69.90 C v
Functional Diagram Material External position of reference value Reference value of process Shown without positioner Feedback/Position Transducer Desired-Position Process Control Actual- Position Positioner 5 6 Supply air Solenoid Valves Exhaust air 4 Control Valve 3 Sensor Valve body: 36 SS Plug and seat: 36 SS or 36 SS and PTFE 3 Pin: 36 SS 4 Valve bonnet: 36 SS 5 Actuator: Polyamide 6 Packing glands: PTFE Packing box: 36 SS Ordering Chart Item No. for Different Connections Orifice Size Actuator Piston dia. Max. Oper. Pressure [PSI] Seal Threaded Port [ NPT] Item No. Weight [lbs] Tube O.D. Tri-Clamp Item No. Weight [lbs] Pipe Size 50# ANSI Flange Item No. Weight [lbs] / 30 / 430 686 V 430 696 X 6.0 / 45 6Q 45 603 Z 9.3 30 430 687 W 430 697 Y 6.4 3/ 4 USO 50 9 USO 5 0 6.4 3/ 4 45 6 R 45 604 S 0.8 30 40 666 E 46 69 U 8.8 40 678 J* 46 3 E* 8.8 45 63 J 45 605 T 4.3 -/4 30 -/4 40 667 F 46 70 Z.9 -/ 4 40 679 K* 46 3 F*.9 -/ 4 45 64 K 45 606 U 9.6 -/ 3.94 75 -/ 40 668 Q 46 7 N 5.0 -/ 40 680 H* 46 33 G* 5.0 -/ 45 65 L 45 607 V 3.8 3.94 40 40 669 R 46 7 P 7.8 40 68 W* 46 34 H* 7.8 45 66 M 45 608 E 8.9 *Metric 3
Dimensions NPT-port Flow direction Tri-Clamp Variable dimensions P (NPT Actuator Piston dia. C E øf øj K L M N /.48 9.57 0.7.34 4.8.5 0.60 3..48 9.69 0.93.99 4.69.3 0.68 3.43 0.5.7.99 5...66 4.0 /4 0.76.5.99 5.95 3.04.4 4.73 / 3.94.8.75.5 6.5 5.76 5.05 4.73 3.94 3.36.7 3.05 7.88 7.0 6.04 5.87 4
50% More Economical Than Conventional Control Valves Pressure Control Flow Control Temperature Control to calibrate Automatic self-adjustment of basic parameters by finger tip control to operate User-friendly operation LCD and key pad interface Menu-guided programming Programmable characteristic curves to install Compact design Delivered pre-mounted, tested and ready to install Requires less space than conventional control valves Burkert Link to operate Burkert control valve with Burkert digital flow transmitter for proportional process control. 5
Dimensions Variable dimensions Size Actuator piston dia. A A D C P E F C I K L d /.48 5.5 0.84 3.5.3 9.57 0.47.73.38.38.48 5.99.06 3.90.94 9.69 0.55.3.75.69 6.50.33 4.6 3.98.8 0.5 0.63.7 3.3.00 /4 7.0.67 4.6 3.98 3.63 0.76 0.7.64 3.50.50 / 3.94 7.49.90 5.00 5.00 6.43.8 0.75.76 3.88.88 3.94 8.5.38 5.99 5.00 7.6 3.36 0.83 3.03 4.75 0.75 3.63 6 In case of special requirements please consult for advice. We reserve the right to make technical changes without notice. US_63_07/0