503 FLOODLIGHT 126 600W HPS 1000W and 2000W versions The 503 is a high powered floodlight with a wide ambient temperature range. The high upper ambient and corrosion resistant aluminium constriction, make the 503 ideal for use even in the hottest and hostile environments. Standard Specification Features Ingress Protection Enclosure Entries IP66/67 to EN60529 Marine grade aluminium LM6 alloy body with toughened glass window, silicone rubber gasket 1 x M20 cable entries Highly resistant to corrosion and mechanical damage All A4 stainless steel fasteners High ambient applications Termination 3 core 4mm² max conductors Reflector Wide beam high purity anodised aluminium Mounting Foot mounted Windage 0.227m² Control Gear Refer to universal control gear box for models with HPS or Metal Halide lamps Relamping Via end cover secured by stainless steel screws Electrical Supply 250V Max ac/dc for tungsten halogen lamps
INDUSTRIAL and MARINE APPLICATIONS 127 Std. Cat No. Wattage Lamp Type Lampholder Weight 503I/600/HS/IG* 600W HPS E40 25kg 503I/1000/HS/IG* 1000W HPS E40 25kg 503I/1000/MH/IG* 1000W Metal Halide E40 25kg 503I/2000/MH/IG* 2000W Metal Halide E40 25kg 503I/2000/TH 2000W Single ended T/Halogen E40 25kg * Remote gearbox required (see Universal Box), page 134 or (502 box), page 136. Options - Suffix to Catalogue No. /P PTFE coating /N Narrow beam reflector Accessories Should be ordered separately Catalogue Order Code Pole mounting bracket assembly (64-114mm pole diameter) S2000-0007 Swinging jib bracket S2000-0019 Anti-glare shield S5030-0007 Wire guard S5030-0008 Product design and specifications are subject to change without notice, please check the Chalmit website for latest specifications.
UNIVERSAL BOX CONTROL BOX 134 The Universal is a lamp control and transformer box for use in Industrial areas. It can be used as a control box for up to 600W HID lamp sources. The Universal box can also be specified as a 120V transformer box up to 1000VA. Standard Specification Features Ingress Protection Enclosure Entry Termination Installation Control Gear IP66/67 to EN 60529 316S31 Marine grade stainless steel with silicone rubber gasket 3 x M20 cable entries 3 core 6mm² max. conductor with looping Base mounting straps Internal copper/iron and PFC correction capacitor as required Marine grade stainless steel construction Easy to install and maintain Hinged lid with three captive fixing screws Lightweight Control gear easily accessed and can be replaced Thermal cut-outs fitted on ballast and transformer Operating Position Cable entries on lower end, if mounted vertically Electrical Supply 220-254V 50Hz - Control box version, 120V 50-60Hz - Transformer box version
INDUSTRIAL and MARINE APPLICATIONS 135 Std. Cat No. Wattage Lamp Weight UNII/150/MS 150W HPS/Metal Halide 10.5kg UNII/250/MS 250W HPS/Metal Halide 11.5kg UNII/400/MS 400W HPS/Metal Halide 12.0kg UNII/600/HS 600W HPS 14.0kg UNII/500/TF* 500VA Transformer 11.0kg UNII/1000/TF* 1000VA Transformer 12.0kg *120 to 240V step up transformer boxes for fixed applications only. (Not portable). Options - Suffix to Catalogue No. /60 60Hz /MF Mains fuse /M25 M25 cable entries /3P 3 Phase termination Product design and specifications are subject to change without notice, please check the Chalmit website for latest specifications.
502 502 CONTROL BOX 136 The 502 control gearbox is designed for use with high wattage High Pressure Sodium and Metal Halide lamp types. The 502 is manufactured from marine grade stainless steel making it suitable for use in corrosive and saline environments. Standard Specification Features Ingress Protection Enclosure Entries Termination Mounting Control Gear IP66/67 to EN60529 316S31 marine grade stainless steel construction 3 x 20mm cable entries 3 core 4mm² max conductors Base mounted straps Internal copper/iron multi-tapped ballast and PFC capacitors (Ignitor not fitted on standard models) Marine grade stainless steel construction Easy to install and maintain Hinged lid with three captive fixing screws Lightweight Control gear easily accessed and can be replaced Thermal cut-outs fitted on ballast and transformer Electrical Supply 220, 230, 240, 254V 50Hz (Always state V/Hz when ordering)
INDUSTRIAL and MARINE APPLICATIONS 137 Std. Cat No. Wattage Lamp Weight 502I/1000/MH 1000W Metal Halide 32.0kg 502I/1000/HS 1000W HPS 32.0kg 502I/2000/MH 2000W Metal Halide 36.0kg Options - Suffix to Catalogue No. /60 60Hz supply /NC No capacitors /M25 M25 cable entries Product design and specifications are subject to change without notice, please check the Chalmit website for latest specifications.