Edelbrock Total Power Package

DYNO-MATCHED PARTS FOR PROVEN PERFORMANCE WITH NO GUESSWORK

Edelbrock Total Power Package System PROVEN PERFORMANCE WITH NO GUESSWORK To get great performance out of any engine, the components must work together. Since the early 1980 s, the Edelbrock Total Power Package System has solved the parts matching puzzle for many street performance enthusiasts. Intake manifolds, camshaft kits, cylinder heads and carburetors are the core of the Power Package. Edelbrock is adding even more choices in components to get even greater performance gains out of an engine. The original no guesswork package now includes more manifolds, more cam kits, and more cylinder heads. Street legal Power Packages are possible with emission legal square-bore carbs. Our street legal Tubular Exhaust System headers (TES) or Shorty Headers, mufflers and cat-back systems complete the Edelbrock Total Power Package in late-model, emission-equipped vehicles. PERFORMER PACKAGES STREET LEGAL* POWER FROM IDLE TO 5500 An Edelbrock Performer Power Package is designed to greatly increase performance and driveability in the low- to mid-rpm range. Performer packages provide incredible power for passing, towing, climbing grades, daily driving or traveling across the country in an RV. Your stock engine will be more efficient, with the potential for increased mileage and lower exhaust emissions. The main components of this package include: intake manifolds, carburetors, camshafts and cylinder heads. For late-model fuel injected vehicles, Performer intake manifolds offer performance improvements with emissions equipment compatibility. Camshafts and cylinder heads are also available for these vehicles. Performer Multi-Point EFI Systems for GM vehicles originally equipped with throttle body injected V8s, Tubular Exhaust System headers, Shorty Headers, Mufflers and Cat-Back Systems are available to increase performance even further. Performer-Plus Cam & Lifters #2102 Performer Heads #60759 Edelbrock is an exclusive NASCAR Performance Partner Performer Series Carburetor #1405 Performer Manifold #2701 PERFORMER RPM PACKAGES POWER FROM 1500 TO 6500 RPM The Performer RPM Power Package has a broad operating range for streetable performance and high-end horsepower. The dual-plane, 180 design of the Performer RPM intake works with an Edelbrock carburetor for great throttle response and power up to 6500 rpm. Our RPM Air-Gap manifolds have a unique air-gap design for a cooler, denser intake charge and more power. The Performer RPM cam has more lift and duration than most street cams with acceptable low-end torque while maintaining 10"-12" Hg @ idle. Performer RPM cylinder heads are matched to the intake and available bare or assembled with top-quality valvetrain parts for maximum bolt-on power. Ideal for high-performance street and weekend events, Performer RPM packages are for non-emission engines only. Because of the high rpm (above 5500) capabilities of this package, a high-volume oil pump, adjustable rocker arms and high-performance pistons with 9.5:1 compression are recommended. Performer RPM Heads #60259 Thunder Series AVS Carburetor #1806 Performer RPM Manifold #7121 *Many Performer Power Package components are street legal. See separate listings for details. NASCAR makes no claims as to the quality or performance of the products or services offered by any company. Performer RPM Cam and Lifters #7122 *Many Performer Power Package components are street legal. See separate listings for details.

Edelbrock Total Power Package Components ALUMINUM INTAKE MANIFOLDS Edelbrock is the leading designer and manufacturer of aluminum intakes. Edelbrock manifolds utilize the features that you need for optimum performance. When you buy an Edelbrock manifold, whether it s for the street or the track, you re getting the best. Edelbrock the name that s been synonymous with quality and performance for over six decades. Edelbrock manifolds deliver optimum power for your daily driver, street rod, 4x4 or race car. Performer intakes deliver crisp throttle response from idle to 5500+ rpm right where you drive on the street. Performer RPM intakes crank out the horsepower up to 6500+ rpm while maintaining good throttle response for the street. Performer Air-Gap and RPM Air-Gap manifolds feature the air gap design for the ultimate in street performance. The air gap runs the entire length of the manifold for a cool, dense mixture and more power. 4-BARREL CARBURETORS It s a new look on a proven design! Edelbrock Performer Series and Thunder Series AVS carburetors with EnduraShine Finish deliver legendary Edelbrock reliability and show-winning good looks. These carbs won t stain, turn yellow or blue from heat. They match our EnduraShine manifolds, water pumps and accessories for a complete package. Float levels are factory set and adjustments are rarely needed. Durable two-piece design has gaskets above the fuel level for a leak-free design.the Thunder Series AVS carb shares all the performance advantages of the popular Edelbrock Performer Series with innovative new features. The Qwik-Tune secondary air valve can be easily adjusted to match your needs. Whether you want the secondaries to kick in early or late, you can set the air valve using standard tools, with no extra springs. Available in 500, 650 and 800 cfm models, in manual or electric choke and 650 cfm for Off-Road applications. For 4x4 owners, the Thunder Series AVS off-road carbs include spring-loaded needles and seats for outstanding performance in rough, uneven terrain. DYNO-MATCHED CAMSHAFT KITS Designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. Performer RPM cams provide power from 1500 to 6500+ rpm for street high-performance applications. These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high-rpm hp while maintaining acceptable low-end torque. Performer RPM Hydraulic Roller camshafts are dyno-matched to Performer RPM Power Packages. Roller tappets reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance. ALUMINUM CYLINDER HEADS Edelbrock Performer and Performer RPM aluminum heads for the street increase power right out-of-the-box. With CNC-matched ports and hand-blended bowls, they provide superior flow for a broad, powerful torque curve. Features include: extra thick decks, heli-coiled bolt holes, compatibility with stock rockers, and bronze guides. All Performer heads are 50-state street legal and Performer RPM heads are for non-emission engines. Both styles come with high-quality parts and have runners in the stock position for bolt-on convenience. Our Victor Series heads provide max power for competition engines. Engineered to greatly increase performance and efficiency, Edelbrock E-Tec heads fit 302, 327, 350 and 400 c.i.d. S/B Chevys with Vortec-style intake manifolds. They incorporate a high-quench combustion chamber which promotes a more uniform atomization of the air/fuel mixture for more power. All Edelbrock heads are built by Edelbrock from start to finish in the USA. 2

POWER PACKAGE PERFORMER POWER PACKAGES IDLE TO 5500 RPM How to Use This Guide As a useful tool for our customers, this Total Power Package Guide cross references engine families to component parts. It takes the guesswork out of choosing the right combination. The guide is organized into 2 sections for Performer Packages and Performer RPM Packages After finding the right Power Package section according to your RPM range, read down the left column to find your Engine Family Read across to find the part numbers for your RPM range and make a list Using this list of part numbers, find each individual listing in our catalog for product details and recommendations. This is especially important on those numbers marked with a footnote Carburetors and Throttle Bodies are listed by recommended size; please see our current catalog for complete descriptions and part numbers This guide is for reference only. Many important facts can be found in our main catalog Follow these steps and you can be sure to get the right combination of parts for proven performance An Edelbrock Total Power Package offers you proven performance through careful design, thorough testing and the information you need to plan your engine upgrades. Off-Road and Marine: Thunder Series AVS carburetors with spring-loaded needles and seats are available for off-road applications. Performer Series carbs and cylinder heads are available for marine applications. ENGINE FAMILY INDUCTION Carburetor Intake Manifolds or Throttle Cylinder & EFI Systems (G) Body Size Heads (G) AMC 290-304-343-360-401 V8 1970-91 2131 600-650 cfm 60139 304-360-401 V8 EGR 1970-91 3731 500-650 cfm - BUICK 231-252 V6 even-fire 1979-84 5486 500 cfm - CHEVROLET 2.8L V6 longitudinal 82-85 2V 3785 & 3787 - - 2.8L V6 longitudinal 82-85 4V (B) 3785 & 3789 - - 200, 229, 90 V6 1978-86 (A) 2111 500 cfm (B) - 4.3L 90 V6 T.B.I. 1987-95 3713 - - 262-400 V8 1957-86 2101, 2601, 2701 600-650 cfm (B) 60759/60909 283-400 V8 w/vortec or E-Tec 57-99 2116 600-650 cfm (B) 60979 305-400 V8 1987-95 non-egr (A) 2104, 2604 600-650 cfm (A,B) 60859 262-400 V8 73-86 EGR (not H.O. or T.P.I.) 3701 600-650 cfm (A,B) 60759 305 V8 EGR LG4 1978-86 3701-60759 305 V8 EGR L69 1978-86 3701-60759 262-400 V8 EGR 1987-95 3706-60859 305, 350 V8 T.B.I. 1987-95 3704-60859 (A) 350 V8 T.B.I. 1987-95 3501, 3502-60859 396-427-454 V8 1965-90 2161 600-800 cfm 60479 402-454 V8 EGR 1972-89 3761-60479 454 V8 T.B.I. 1987-95 (Mk IV) (Gen V) 3764-60499 454 V8 T.B.I. 1987-95 (Mk IV) (Gen V) 3562, 3563-60499 CHRYSLER 318-340-360 V8 1964-91 2176 600-650 cfm - 318-340-360 V8 EGR 1972-91 3776 - - 361-383-400 V8 1959-79 2186 600-800 cfm - 413-440 V8 1959-79 2191 750-800 cfm - FORD 289-302 V8 Early Models 1965-95 2121 500-650 cfm 60329, 60359 289-302 V8 EGR except EFI 1973-85 3721, 3723-60329, 60359 5.0L V8 EFI 1986-93 Mustang GT/LX 3821 70mm (C) 60379, 60399 5.0L V8 EFI 1994-95 Mustang GT 3821 70mm (C) 60379, 60399 5.0L V8 EFI 1987-95 trucks 3841-60379, 60399 5.8L V8 EFI 1988-95 trucks 3881-60379, 60399 351W V8 1969-95 2181 600-650 cfm (B) 60329, 60379 351W V8 EGR except EFI 1973-95 3781, 3783-60329, 60399 351M-400 V8 1971-82 2171 600-650 cfm - 351M-400 V8 EGR 1973-82 3771 - - 352-360-390-427-428 V8 1958-76 2105 600-800 cfm - 429-460 V8 1968-87 2166 650-800 cfm - 429-460 V8 EGR 1973-87 except EFI 3766 - - OLDSMOBILE 330-350-403 V8, 1964-85 3711 - - 400-425-455 V8, 1967-76 2151 750-800 cfm - PONTIAC 350-455 V8 1965-79 2156 600-800 cfm 60579 Check the part description in each section to determine if the part is legal for sale or use on pollution controlled motor vehicles. (A) Certain exclusions apply; read the listing for this part or call our Tech Line (B) Not for computer-controlled engines (C) Throttle body must be used with matching EGR plate (D) Not for OEM hydraulic roller-lifter equipped engines (E) Retainers and keepers available for these springs (for stock heads only)

POWER PACKAGE VALVETRAIN ACCESSORIES Valve Valve Aluminum Aluminum Chrome Camshaft Timing Gear Springs (E) Spring V. Covers V. Covers Valve Water & Lifters Chains Drive non-rotate, rotate Kits w/name No Name Covers Pumps (G) 2132 7818-5832, 5932 (F) - - 4431-2132 7818-5832, 5932 (F) - - 4431-5487 7829 - - (F) - - 4486 (A) - 3790 (B) - - - (F) - - 4488-3790 (B) - - - (F) - - 4488-2112 (A) 7331/32, 7800/01 7890 5813, 5913 (F) - - - 8811 3714 (A) 7332, 7801-5814 (F) 4252 - - 8881 2102, 2103 7331, 7800, 7802 7890 5802, 5902 5894 4248, 4249 4244, 4245 4449, 4649 (A) 8810, 8811 2102, 2103 7331, 7800, 7802 7890 - - 4246, 4247 - - 8810, 8811 2102, 2103 7331, 7800, 7802 7890 5802, 5902 5894 4246, 4247 (A) - - 8881 2102, 2103 7331, 7800, 7802 7890 5802, 5902 5894 4248 4244 4449 (A) 8810, 8811 3702 7331, 7800, 7802 7890 5802, 5902 5894 4248 4244 4449 (A) 8811-7331, 7800, 7802 7890 5802, 5902 5894 4248 4244 4449 (A) 8811 2102, 2103 (B,D) 7331, 7800, 7802 7890 5802, 5902 5894 4246, 4247 (A) - - 8881 3702 (A,D) 7331, 7800, 7802-5802, 5902 5894 4246, 4247 (A) - - 8881 3702 (A,D) 7331, 7800, 7802-5802, 5902 5894 4246, 4247 (A) - - 8881 2162 (A) 7334, 7809, 7810 7891 5862 5895 4280 4281 4480, 4680 8850, 51/52-7334, 7809, 7810 7891 5862 5895 4280 4281 4480, 4680 8850, 51/52-7334, 7809, 7810-5862 5895 4280 4281 4480, 4680 8851, 8853-7334, 7809, 7810-5862 5895 4280 4281 4480, 4680 8851, 8853 2177 7803-5877, 5977 (F) 4295-4495 8877 2177 (A) 7803-5877, 5977 (F) 4295-4495 8877 2192 (A) 7804-5892, 5992 (F) - - 4491 8814 2192 (A) 7804-5892, 5992 (F) - - 4491 8814 2122 (A) 7335, 7811/14/20 7892 5822, 5922 5896 4260 4261 4460 (A) 8841, 8842 2122 (A) 7335, 7811/14/20 7892 5822, 5922 5896 4260 4261 4460 (A) 8842 3722 7811, 7814 7892 5822 (F) - - - 8840 3722 7811, 7814 7892 5822 (F) - - - - - 7811, 7814 7892 5822 (F) - - - - 3782 (A) 7811, 7814 7892 5822 (F) 4260 - - - 2182 7335, 7811/14/20 7892 5882, 5982 (F) 4260 4261 4460 (A) 8843 2182 (A) 7811/7814 7892 5882, 5982 (F) 4260 4261 4460 (A) 8843 2172 7821-5872, 5972 (F) - - 4461 8844 2172 (A) 7821-5872, 5972 (F) - - 4461 8844 2106 (A) 7808-5806, 5906 (F) - - 4462 8805 (A) 2167 7830 7894 5867 (F) - - 4463 8866 2167 (A) 7830 7894 5867 (F) - - 4463 8866 3712 (A,B) 7813-5812 (F) - - 4485-2152 7813 - - (F) - - 4485-2157 (A) 7812 7895 5857 (F) 4256-4456 - (F) Retainers and keepers available separately (G) Manifolds, heads and water pumps also available with polished finish 4

POWER PACKAGE PERFORMER RPM POWER PACKAGES 1500 TO 6500 RPM How to Use This Guide As a useful tool for our customers, this Total Power Package Guide cross references engine families to component parts. It takes the guesswork out of choosing the right combination. The guide is organized into 2 sections for Performer Packages and Performer RPM Packages After finding the right Power Package section according to your RPM range, read down the left column to find your Engine Family Read across to find the part numbers for your RPM range and make a list Using this list of part numbers, find each individual listing in our catalog for product details and recommendations. This is especially important on those numbers marked with a footnote Carburetors and Throttle Bodies are listed by recommended size; please see our current catalog for complete descriptions and part numbers This guide is for reference only. Many important facts can be found in our main catalog Follow these steps and you can be sure to get the right combination of parts for proven performance ENGINE FAMILY INDUCTION Carburetor Intake or Throttle Cylinder Manifolds (G) Body Size Heads (G) AMC 343-401 V8 1970-91 7530, 7531 650-800 cfm 60119 CHEVROLET 60719, 60739 283-400 V8 (A) 1957-86 7101, 7501 650-800 cfm 60899, 60999 283-400 V8 w/vortec or E-Tec 57-99 7116, 7516 650-800 cfm 60979, 60989 4.8, 5.3, 5.7, 6.0L 1998-02 7118 650-800 cfm 61989, 61949 396-454 V8 (oval-port) 1965-90 7161, 7561 650-800 cfm 60459 396-454 V8 (rect.-port) 1965-90 7163, 7562 650-800 cfm 60559 CHRYSLER 340-360 V8 1964-91 7176, 7576 650-800 cfm 60779 383-400 V8 1959-79 7186 750-800 cfm 60929 413-426-440 V8 1959-79 7193 750-800 cfm 60929 FORD 289-302 V8 1965-95 7121, 7521 600-800 cfm 60229, 60259 5.0L 1986-95 7123 70mm (C) 60399 351W V8 1969-95 7181, 7581 650-800 cfm 60229, 60259 390-428 FE 1958-76 7105 650-800 cfm 60069 429-460 V8 1968-87 7166, 7566 750-800 cfm 60669, 60679 OLDSMOBILE 350-403 V8 1964-85 7111 600-800 cfm 60519 PONTIAC 350-455 V8 1965-79 7156 600-800 cfm 60579, 60599 (H) An Edelbrock Total Power Package offers you proven performance through careful design, thorough testing and the information you need to plan your engine upgrades. Off-Road and Marine: Thunder Series AVS carburetors with spring-loaded needles and seats are available for off-road applications. Performer Series carbs and cylinder heads are available for marine applications. Edelbrock Performer RPM Camshaft Kits are designed for street high-performance applications and provide power from 1500 to 6500 rpm. These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high-rpm horsepower while maintaining acceptable low-end torque. Performer RPM cams have more lift, duration and have 10 to 12 inches of manifold vacuum at idle. On the next 2 pages, you ll find horsepower graphs showing the power levels obtainable when the Performer RPM package is used with the right combination of engine components. (A) Certain exclusions apply; read the listing for this part or call our Tech Line (B) Not for computer-controlled engines (C) Throttle body must be used with matching EGR plate (D) Not for OEM hydraulic roller-lifter equipped engines (E) Retainers and keepers available for these springs (for stock heads only) (F) Retainers and keepers available separately

POWER PACKAGE VALVETRAIN ACCESSORIES Valve Aluminum Aluminum Chrome Camshaft Timing Gear Valve Spring V. Covers V. Covers Valve Water & Lifters Chains Drive Springs (E) Kits w/name No Name Covers Pumps (G) 7132 7818 - - - - - 4431-7102, 2201 (I) 7800, 7331 7890 5703 5794 4248, 4249 4153, 4156 4449, 4649 8810, 8811 7102, 2201, 2204 (I) 7800, 7801, 7331 7890 - - 4246, 4247 (D) - - 8810, 8811 2215 (I), 2216 (I) 7333 - - - - - - - 7162, 2261 (I) 7810, 7334 7891 5762 5795 4280-4480, 4680 8850/51/52 7162, 2261 (I) 7810, 7334 7891 5762 5795 4280-4480, 4680 8850/51/52 7177 7803-5777 (F) 4295-4495 8877 7194 7804-5792 (F) - - 4491 8814 7194 7804-5792 (F) - - 4491 8814 7122, 2221 (I) 7811, 7820, 7335 7892 5722 5796 4260 4261 4460 8841, 8842-7811 7892 5722 (F) 4260 4261 4460 8840 7182 7811, 7820, 7335 7892 5722 (F) 4260 4261 4460 8843 7106 7808-5767 (F) - - 4462 8805 7167 7830 7894 5767 (F) - - 4463 8866 7112 7813-5712 (F) - - 4485 - AMC 7157 7812 7895 5757 (F) 4256-4456 - CHEVY PERFORMER RPM PACKAGE FOR AMC PERFORMER PACKAGE FOR S/B CHEVY HP / Torque 500 450 400 350 PERFORMER RPM EFI PACKAGE FOR AMC Torque Horsepower 300 383 c.i.d. Chevy V8 250 Performer RPM Intake #7516 200 461 ft Performer RPM cam #2207 Performer Series Carb #1812 Performer RPM heads #60989 / lbs 1-3/4 headers 150 2500 3000 3500 4000 4500 5000 5500 6000 RPM PERFORMER RPM PACKAGE FOR 383 CHEVY PERFORMER 2-0 PACKAGE FOR B/B CHEVY (G) Manifolds, heads and water pumps also available with polished finish (H) Not for 326-350 c.i.d. Pontiacs (I) Hydraulic roller cam 6

POWER PACKAGE GRAPHS CHRYSLER PERFORMER 318/360 PACKAGE FOR S/B CHRYSLER PERFORMER RPM 440 PACKAGE FOR B/B CHRYSLER PERFORMER RPM 440 EFI PACKAGE FOR B/B CHRYSLER FORD PERFORMER RPM POWER PACKAGE FOR S/B FORD WITH HYDRAULIC LIFTER CAM PERFORMER RPM PACKAGE FOR S/B FORD WITH HYDRAULIC ROLLER CAM PERFORMER PACKAGE FOR 5.0L FORD Ford FE Performer RPM Power Package PERFORMER RPM PACKAGE FOR FE FORD PERFORMER RPM PACKAGE FOR 460 FORD All parts on this page not legal for sale or use on pollution controlled motor vehicles.

CHEVY POWER POWER PACKAGE PACKAGE KITS #2094 611HP/573 FT/LBS. Performer RPM Hydraulic Roller Cam...2262 (2) Victor Jr. 24 Cylinder Heads, complete...77479 Timing Cover Gasket and Seal Set...6998 Cylinder Head Gasket Set...7376 Victor Jr. 454-R intake manifold...2902 Intake Manifold Bolt Kit...8564 Cylinder Head Bolt Set...8554 Power Package Top End Kit #2094 for big-block Chevys CHEVY POWER PACKAGE TOP END KITS Our Total Power Package concept is second to none. To make things easier in parts selection, we ve taken the next step in providing "no guesswork" by placing the power package components together under a single part number. These kits include almost everything you need to build your own engine using our performance proven Performer RPM 410 hp or 435 hp E-Tec Power Packages; intake, heads, cam & lifters (except roller lifters), head & intake bolt kits as well as a complete gasket set. Simply finish the system with the Edelbrock carburetor that best matches your application. See carb listings in our catalog for application guidelines. Power Package Top End Kit- 410 hp...#2098 Power Package Top End Kit- 435 hp w/late model hydraulic roller cam...#2097 (A) Power Package Top End Kit- 435 hp w/retro-fit hydraulic roller cam pre-'87...#2099 (A) Power Package Top End Kit- S/B 383, 460 hp...#2096 (A) Power Package Top End Kit- B/B 502 611 hp w/hydraulic roller cam...#2094 (A) Notes: Performance results obtained on a 350 c.i.d. ZZ4 shortblock with 9.5:1 compression. #2096 460HP/460 FT/LBS. Performer RPM Hydraulic Roller Cam for Late-Model Blocks...2207 (2) E-Tec 200 Cylinder Heads, complete...60989 Timing Cover Gasket and Seal Set...6997 Cylinder Head Gasket Set for E-Tec Heads...7367 RPM Air-Gap Vortec intake manifold...7516 Intake Manifold Bolt Kit for E-Tec heads...8516 Cylinder Head Bolt Set...8550 #2097 435HP/435 FT/LBS. Performer RPM Hydraulic Roller Cam for Late-Model Blocks...2204 (2) E-Tec 170 Cylinder Heads, complete...60979 Timing Cover Gasket and Seal Set...6997 Cylinder Head Gasket Set for E-Tec Heads...7367 RPM Air-Gap Vortec intake manifold...7516 Intake Manifold Bolt Kit for E-Tec heads...8516 Cylinder Head Bolt Set...8550 #2098 410HP/408FT/LBS. Performer RPM Hydraulic Cam & Lifters for early-model blocks...7102 (2) Performer RPM Cylinder Heads, complete...60899 Timing Cover Gasket and Seal Set...6997 Cylinder Head Gasket Set...7361 RPM Air-Gap intake manifold...7501 Intake Manifold Bolt Kit...8504 Cylinder Head Bolt Set...8550 #2099 435HP/435FT/LBS. Performer RPM Hydraulic Roller Cam for early-model blocks...2201 (2) E-Tec 170 Cylinder Heads, complete...60979 Timing Cover Gasket and Seal Set...6997 Cylinder Head Gasket Set for E-Tec heads...7367 RPM Air-Gap Vortec Intake Manifold...7516 Intake Manifold Bolt Kit for E-Tec heads...8516 Cylinder Head Bolt Set...8550 All parts on this page not legal for sale or use on pollution cotrolled motor vehicles. (A) Kits with hydraulic roller cams do not include lifters 8

FORD POWER PACKAGE KITS Power Package Top End kit #2092 POWER PACKAGE TOP END KITS FOR SMALL-BLOCK FORD The success of our Power Package Top End Kits for small-block Chevys has paved the path to new kits for 289-302 and 351W small-block Fords. We ve taken the next step in providing "no guesswork" by placing the power package components together under a single part number. These kits include almost everything you need to build your own engine using our performance proven Power Packages; intake, heads, cam & lifters (except roller lifters), head & intake bolt kits as well as a complete gasket set. Simply finish the system with the Edelbrock carburetor that best matches your application. See carb listings in our catalog for application guidelines. Power Package Top End Kit 289-302- 367 hp...#2091 Power Package Top End Kit 351W- 400 hp...#2092 Power Package Top End Kit 351W- 451 hp with hydraulic roller cam...#2093 (A) #2091 367HP/340 FT/LBS. Performer RPM Hydraulic Cam & Lifters for early-model blocks...2221 (2) Performer RPM Cylinder Heads, complete...60259 Timing Cover Gasket and Seal Set...6991 Cylinder Head Gasket Set...7364 RPM Air-Gap 302 intake manifold...7521 Intake Manifold Bolt Kit...8524 Cylinder Head Bolt Set...8552 Performer-Link Timing Set...7820 #2092 400HP/412 FT/LBS. Performer RPM Hydraulic Cam & Lifters for early-model blocks...7182 (2) Performer RPM Cylinder Heads, complete...60259 Timing Cover Gasket and Seal Set...6991 Cylinder Head Gasket Set...7364 RPM Air-Gap 351W intake manifold...7581 Intake Manifold Bolt Kit...8584 Cylinder Head Bolt Set...8553 Performer-Link Timing Set...7820 #2093 451HP/433 FT/LBS. Performer RPM Hydraulic Roller Cam for early-model blocks...2281 (2) Performer RPM CNC Cylinder Heads, complete...51309 Timing Cover Gasket and Seal Set...6991 Cylinder Head Gasket Set...7364 RPM Air-Gap 351W intake manifold...7581 Intake Manifold Bolt Kit...8584 Cylinder Head Bolt Set...8553 Performer-Link Timing Set...7820 All parts on this page not legal for sale or use on pollution controlled motor vehicles. (A) Kits with hydraulic roller cams do not include lifters

SEAL IT TIGHT, SEAL IT RIGHT Edelbrock intake gaskets are matched to Edelbrock Performer and Performer RPM cylinder heads and manifolds for optimum flow and performance. They feature port openings that are surrounded by a silicone bead for improved sealing. Sold in pairs. EDELBROCK POWER PACKAGE GASKETS Edelbrock exhaust gaskets are made of high density non-asbestos fiber/metal reinforced composite material that is bonded to a metal core. This gives them excellent sealing performance, load retention, chemical resistance and structural strength. Sold in pairs. Edelbrock performance CRC (core-reinforced-composite) valve cover gaskets are fabricated from multi-layer construction consisting of two highly compressible, high rubber content, fiber-reinforced outside layers, chemically bonded to a high strength composite core. This unique construction provides excellent sealing integrity and conformability for easy installation as well as radial strength to resist high-vacuum or blow-out conditions. Sold in pairs. An Edelbrock cylinder head gasket set includes everything you need to install Edelbrock aluminum heads; intake, exhaust, head, waterneck, distributor and valve cover gaskets. End seals are not included with intake gaskets, we recommend using RTV silicone. Small-block Chevy gasket set #7361 ENGINE FAMILY CYLINDER HEAD GASKET SETS Includes everything you need to install Edelbrock Performer and Performer RPM heads CYLINDER HEAD GASKETS For Edelbrock Performer and Performer RPM heads (1 pair) INTAKE GASKETS Matches Performer and Performer RPM manifolds and heads EXHAUST GASKETS Designed to match Edelbrock Performer and Performer RPM heads VALVE COVER GASKETS Unique construction provides excellent sealing integrity & conformability AMC AMC (1967-69 290-390; 1970-91 290-304-343-360-390-401) 7372 7329 7213 7239 7532 BUICK Buick (400-455 ) 7369 7346 7246 7247 7546 CHEVROLET Chevrolet S/B 7201 (pre-1987, 302-327-350) 7361 7310 72018 Set of (10 pr.) 7204 7549 Chevrolet S/B (pre-1987, 400) - - 7201 7204 7549 Chevrolet S/B E-Tec 7235(C) (pre-1987, 302-327-350) 7367 7310 72358 Set of (10 pr.) - - Chevrolet S/B E-Tec (pre-1987, 400) - - 7235(C) - - Chevrolet B/B Rectangular Port (Mark IV, 396-402-427-454) 7362 7302 7202 7205 7580 Chevrolet B/B Oval Port (Mark IV, 396-402-427-454) 7363 7302 7203 7205 7580 Chevrolet B/B Rectangular Port (1991 & later Gen V & VI, 454-502) 7376 7375 7202 7205 7580 CHRYSLER (1958-1979), 361-383-400, 413-426 (except Hemi), and 440 engines 7366(B) 7325 7225(B) 7226 7591 Chrysler (1966-87) 318-340-360 7370 7326 7276 7236 7592 Chrysler Magnum (1992 & Later) 7371 7327 7277 7237 7593 FORD Ford (1970-74 351 Cleveland, 1975-85 351 Modified, 1971-81 400 Modified) 7374 7328 7265 7262 7569 Ford S/B (1963-96, 289, 302 (except Boss) & 351W, 1982-96, 7220 5.0L & 5.8L) 7364 7313 72208 Set of (10 pr.) 7227 7560 Ford FE (1961-76, 390-428) 7368 7337 7224 7229 7568 Ford B/B (1968-1987, 429-460 ) 7365 7314 7223(D) 7228 7563 OLDSMOBILE Oldsmobile (1965-76 400-425-455) 7373 7340 7284 7238 7598 PONTIAC Pontiac (1961-1976, 326-389-421-428-455) 7382 7381 7280 7281 7590 (A) Does not include end seals, Edelbrock recommends the use of silicone sealant in place of end seals (B) Must be used with OE-style valley pan (C) Does not have embossed silicone bead (D) Does not fit CJ or SCJ 10

Edelbrock Corporation Torrance, California 90503 USA Toll free tech line: 1-800-416-8628, 7am-5pm PST, Mon-Fri. Call 1-800-FUN TEAM for a full-line catalog. www.edelbrock.com Brochure #00126 2007 Edelbrock Corporation Rev. 1/07