FORD C.I. 6 CYL (7.808 DECK)
|
|
- Shannon Stafford
- 6 years ago
- Views:
Transcription
1 BLANK PAGE
2 S FORD / LINCOLN / MERCURY CORPORATE SECTION FORD OHC 4 CYL TING LIFT IN. EX. HYDRAULIC-Excellent torque and good Hyd. Hyd. 800 to H mileage. Perfect cam for OEM replacement. HYDRAULIC-Power and mileage Hyd. Hyd to H increase in low-mid range. Great for highway driving. HYDRAULIC-Good for towing in trucks and Hyd. Hyd to H sedans. Excellent torque. Smooth idle. MAGNUM HYDRAULIC-Good all around street Hyd. Hyd to H performance. Can be used daily. mid-range power. HYDRAULIC-Great power in mid-range Hyd. Hyd to H and high. Performance cam for street use. OVAL TRACK Mechanical Flat Tappet Camshafts SOLID-Aftermarket intake and headers to S needed. 500 CFM carburetor, 11:1+ compression. SOLID-Ported cylinder head, longer valves to S :1+ compression. FORD C.I. 6 CYL (7.808 DECK) TING LIFT W/1.5 HYDRAULIC-Best cam for for low Hyd. Hyd. 500 to H torque or for use in 200 c.i. and smaller engines. Economy and smooth idle. HYDRAULIC-Good for towing in c.i. Hyd. Hyd to H mid-range torque and power. Smooth idle. Footnotes: Master Footnote index on page These specs are measured with a stock length valve and.010 lash between the cam and follower. 54 These specs are measured with a.060 longer than stock valve and.010 lash between the cam and follower FAX
3 KITS & COMPONENTS FORD / LINCOLN / MERCURY CORPORATE SECTION FORD OHC 4 CYL N/A N/A CL N/A N/A N/A N/A N/A N/A N/A N/A N/A CL N/A N/A N/A N/A N/A N/A N/A N/A N/A CL N/A N/A N/A N/A N/A N/A N/A MAGNUM N/A N/A CL N/A N/A N/A N/A N/A N/A N/A N/A N/A CL N/A N/A N/A N/A N/A N/A N/A OVAL TRACK N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Mechanical Flat Tappet Camshafts FORD C.I. 6 CYL (7.808 DECK) FORD / LINCOLN / MERCURY CORPORATE SECTION K SK CL N/A N/A N/A K SK CL N/A N/A N/A Footnotes: Master Footnote index on page Stock springs cannot be used. 8 Fits only certain years. RED S ARE THE PREMIUM CHOICE. 59
4 S FORD C.I. 6 CYL (10 DECK) TING LIFT W/1.6 HYDRAULIC-Good torque and mileage for Hyd. Hyd. 500 to H Excellent throttle response. HYDRAULIC-Excellent torque and power Hyd. Hyd to H for towing in 300 c.i. Smooth idle. HYDRAULIC-Moderate performance Hyd. Hyd to H camshaft for 300 c.i. Strong in mid range. Noticeable idle. FORD OHV 6 CYL PASSENGER CARS Mechanical Flat Tappet Camshafts TING LIFT W/1.46 SOLID-Good for OEM replacement or to S rebuild. Low torque with good economy. Very smooth idle. SOLID-Power increase in low-mid to S range. Economy with performance. Smooth idle. SOLID-Moderate performance camshaft to S Strong in mid range. Noticeable idle. FORD 2800 OHV 6 CYL BRONCO II / R TING LIFT W/1.46 SOLID-Good cam for OEM replacement to S or rebuild. Low torque with good economy. Very smooth idle. SOLID-Performance with economy, to S power increase in low-mid range. Smooth idle. SOLID-Moderate performance camshaft to S Strong in mid range. Noticeable idle. FORD 4.0L 6 CYL Mechanical Flat Tappet Camshafts Hydraulic Roller Camshafts TING LIFT W/1.5 HYDRAULIC ROLLER-Good OEM Hyd. Hyd. 800 to HR replacement in Explorers and Rangers. Good torque and mileage. Great for towing. HYDRAULIC ROLLER-Good in Explores Hyd. Hyd to HR and Rangers with aftermarket chip. Strong torque & mid-range FAX
5 KITS & COMPONENTS FORD C.I. 6 CYL (10 DECK) K SK CL N/A N/A K SK CL N/A N/A K SK CL N/A N/A FORD OHV 6 CYL PASSENGER CARS N/A SK CL N/A N/A N/A N/A N/A SK CL N/A N/A N/A N/A N/A SK CL N/A N/A N/A N/A Mechanical Flat Tappet Camshafts FORD 2800 OHV 6 CYL BRONCO II / R N/A SK CL N/A N/A N/A N/A N/A SK CL N/A N/A N/A N/A N/A SK CL N/A N/A N/A N/A Mechanical Flat Tappet Camshafts Hydraulic Roller Camshafts FORD 4.0L 6 CYL FORD / LINCOLN / MERCURY CORPORATE SECTION N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Footnotes: Master Footnote index on page Stock springs cannot be used. RED S ARE THE PREMIUM CHOICE. 61
6 FORD TECH INFORMATION Ford has produced some of the most powerful engines ever to come out of Detroit. With the V-8 engine sizes ranging from there is an engine size and configuration to cover just about any need or application. Ford engines do have some unique characteristics not found in any other make, so in this section we will try to familiarize you with some of the more common differences. This valve train related information should help you when choosing parts or assembling your engine. Engine Types Small Block 31 and 35 Prefix This is the standard engine in most V-8 applications. It has been around since the early 1960 s, and remains very popular today in many configurations. The Small Block Ford engine is commonly referred to as the 5.0 engine found in the Mustang for many years. This engine has become one of the most frequently modified engines Ford has ever produced. There are a few differences in the valve trains of this design, but for the most part they are the same. One thing to remember is that the engines have a very short deck height, requiring a short pushrod. The 351W engine, on the other hand, has a tall deck and a longer pushrod. The L blocks differ from the earlier blocks in that the lifter bosses are taller to accommodate the hydraulic roller lifters. The base circles of the cams for these blocks is larger because of the higher position of the lifters. (These engines use either a prefix 31 (302) or a 35 (351) camshaft, depending on the firing order.) SVO V-8 Race Engine Uses 35 Prefix This engine is almost always found in all out racing, and is a cross between the Windsor and Cleveland designs. It utilizes a Windsor type block and a Cleveland type head. The newest of the head designs is referred to as the Yates head. Cleveland / Modified Uses 32 Prefix This design was introduced in 1969 and was available as a 351 Cleveland, a 351C Boss, or a 351/400 Modified. The easiest way to tell these engines from the standard Small Block is by looking at the front covers. The Small Block / SVO engines have a cast aluminum front cover and water pump housing. The Cleveland / Modified engines have a stamped steel flat front cover. Other than a few rocker arm differences, the valve train in all of these engines is very similar. Big Block FE Ford s FE engine family was introduced in 1958 and was available as either a 332 or a 352 version. Later, the range was expanded to include versions. They have been out of production since the mid seventies, but remain popular today. These engines utilize a shaft rocker arm system, and can be most easily recognized by the fact that the intake manifold is very wide and extends part way under the valve covers. Almost all of the parts in the FE series are used only in this engine, and are not interchangeable with other engine families. Big Block FF The engine commonly referred to as the Ford Big Block is the and is still in production today and used in light trucks and motorhomes. It is an outstanding engine for boats, Bracket Racing, or towing. It typically has a similar but larger Cleveland style valve train. 4.6L SOHC, 4.6L DOHC AND 5.4L SOHC Uses 102 Prefix The Ford Modular Engine line was introduced in the early 1990 s with the idea of designing a new generation of engines from scratch, rather than basing them on then-current production engines. They were developed to replace all existing Ford V-8 pushrod engines. The Modular term came about because of the many interchangeable components between the SOHC and DOHC engines, as well as the ability of Ford to machine and assemble the various engines on the same assembly lines. The design focuses on low friction, excellent sealing and increased block stiffness. With a modern block and head design in both 2- and 4-valve configurations, the engines are both versatile and powerful. They have a sophisticated overhead cam design in both single and dual overhead can versions that utilizes a roller finger follower to reduce friction, increase rpm potential and eliminate maintenance. All cylinder blocks have deep skirts with cross-bolted main caps. SOHC engines have cast iron blocks; DOHC have aluminum blocks. All cylinder heads are aluminum, with very long head bolts to reduce distortion of the cylinder bores and improve sealing. The new design also allows the accessories to be rigidly mounted directly to the block FAX
7 FORD TECH INFORMATION General Tips Firing Order, Small Block & SVO This is one of the most common questions asked by our Ford customers. The firing order for the early engines and the early 5.0 engines is This is the firing order for all prefix 31 cams, and is the standard replacement cam for all early engines. The later 5.0 engine and all 351 engines are designed to use the firing order. This is the firing order for all prefix 35 cams, and cams ordered for these engines should use this prefix. Other than the firing order, the cams are identical. By changing the spark plug wiring at the distributor these cams can be interchanged. EXCEPT IN MASS AIR VEHICLES Valve Springs By far the most common problem encountered when installing a new high performance camshaft is the incompatibility of the existing valve springs to the new cam. All of the factory valve springs are designed to work with a certain lift cam, and since most aftermarket cams have higher lift, the spring must be addressed. It is highly recommended and a requirement of the warranty that the suggested springs be installed along with any COMP Cams camshaft. Most Ford cylinder heads utilized a step cast into the head that acted as the valve spring locator. When installing a dual spring, it is highly recommended that this step be removed by machining to minimize the possibility of coil binding the inner spring. Whenever installing a High-Tech Racing Cam in any engine, the cylinder heads must be equipped with the correct valve springs, screw-in studs, guide plates, and hardened pushrods. The increased loads and ultra high speeds of the racing engines make this a necessity for valvetrain stability. Rocker Studs / General Whenever you are using a high performance camshaft and have problems with the valves not staying properly adjusted, one of the first things to check is the rocker arm studs. Most early model Small Block heads utilized pressed in studs. When high spring loads and high engine speeds are used with these stock type studs, they tend to pull out of the heads. You can check for this by laying a straight edge across the top of the studs to see if any of the studs are too high and out of alignment. If so, the heads should be removed and machined for screw in studs. Positive Stop Stud This type stud was used on and 351W engines, as well as engines with hydraulic cams. They do not allow for lifter adjustment, and work only with smaller cams when the dimensions of the engine (block, head deck height, etc.) remain close to stock. They also don t work on solid lifter cams. COMP Cams offers an adjustment kit (Part # on page 318) for use with the stock positive stop studs. For high performance applications, this type of stud should be replaced with the more conventional screw-in type, along with the pushrod guide plates W Ford Small Block Part # High strength adjusting nut included Spacer allows adjustment of valve train by raising nut away from the bolt shoulder. Must be greater than valve lift Retainer Valve Lock Installed Height Conventional Stud This stud is usually found on early model engines and all engines originally equipped with a solid lifter camshaft. This type of stud uses a locking nut or polylock to keep the valve adjustment from changing. Valve Stem Seal 63
8 FORD TECH INFORMATION Self Aligning Rail Rocker Arms Originally the Small Block engine used a machined slot in the head to guide the rocker arm on the valve. It has been common to enlarge this hole and install a guide plate when switching to a high performance valve train. Later model engines utilize a small alignment slot or ears on the valve tip end of the rocker where it contacts the valve. These rockers must be used with long stem valves. These applications can be easily identified by a large (1/2 ) hole where the pushrod passes through the head and the fact that there is no pushrod guideplate. If the head in question has either a guide plate or a slot to guide the pushrod, the rail type rocker arms cannot be used. Conventional Rocker Arms This type rocker arm was used on 289HP and engines. The cylinder head had a slot cast in the head where the pushrod passed through. This slot guided the pushrod and aligned the rocker arm with the tip of the valve. Some heads have been modified to use a pushrod guide plate instead of this slot. Since there were no rails on the end of the rocker arm, a shorter tip is used on the valve. This type of rocker arm can be used only in conjunction with either a slot in the head or a guide plate, but not both. Fulcrum Style Rocker Arms Fulcrum type rocker arms are used on most 351C and M engines originally equipped with hydraulic cams as well as engines made without guide plates. These rocker arms used a fulcrum or sled in conjunction with a bolt to secure the rocker arm to the head. Pre-1977 models used a slotted pedestal cast into the head to keep the rocker arm aligned with the tip of the valve, while later 5.0, 351W engines and many of the Modified engines used a stamped steel guide under the rocker arm fulcrum to align the rocker. To replace rocker arms of this type with the adjustable Magnum or any roller rocker arm, screw in studs and guide plates will be necessary. These engines can be easily converted by using part # studs, which feature a 5/16 thread on the lower portion of the stud. This will screw directly into the holes in the head, and since these engines use a long tip valve the rail type Magnum (part# ) adjustable rocker arm can be installed. FE Shaft Rocker Arms The FE engines use a shaft rocker arm design. The standard nonadjustable rocker arms will work well with the smaller hydraulic cams, but when installing any solid lifter cam or any hydraulic cam larger than a 292H the rocker arms must be replaced with adjustable rockers. They can be found on page 315. Timing Chain Sets When installing a cam in any Small Block engine, be sure to check items such as the upper and lower cam gears, cam gear spacer, fuel pump eccentric, cam retention plate, and front cover clearance. Ford has changed the arrangement of these items through the years and interference and misfits can occur. A (part #3220) timing chain set should be used on pre W engines. On 1972 and later engines, a (part #3230) chain set should be used. Hydraulic Roller equipped 5.0 engines (1985 and later) must use a (part #2138) timing set to insure proper upper gear fit to the nose of the camshaft. Camshaft Dowel Pin/Fuel Pump Eccentric Two different length dowel pins were used in the front of the cams in W engines. In 1972 and earlier engines, a longer (1.375 ) dowel pin was used so that it would extend through the one piece fuel pump eccentric used on these engines. The 1973 and later engines utilized a two piece fuel pump eccentric which required a shorter (1.125 ) dowel pin. If no eccentric is used, a thicker than standard retaining washer must be used to make up for the thickness of the eccentric. The cam gear MUST be pulled tightly against the snout of the cam. If the gear is not tight against the step at the front of the cam the bolt will come loose and engine failure is sure to occur. Dowel pin failure is fairly common in Small Block Ford engines. This is almost never the result of a defective or soft dowel pin. It is most often caused by the bolt in the center of the cam coming loose and allowing the dowel pin to be loaded and shear. The center bolt should always be torqued to the manufacturer s specification, and a suitable thread lock used to prevent the bolt from coming loose. Valve Stem Oil Seals When changing to a higher than stock lift camshaft it is common to have a clearance problem between the bottom of the spring retainer and the top of the valve stem oil seal. Before final assembly of the heads, install one seal, one valve, and one retainer without the spring. Measure the distance between the top of the seal and the bottom of the retainer to be sure that it is greater than the lift of the valve by at least Be sure to take into account any extra lift due to higher ratio rocker arms. Flat Tappet Break-In All Racing Flat Tappet and some of the higher performance hydraulic and solid cams will require special attention during the break in process. Special springs and certainly tender loving care will be required to insure long life of the cam. Please refer to the instructions in your cam box for complete procedures. If ever in doubt, please call the COMP Cams HELP line at FAX
9 FORD TECH INFORMATION High Ratio Rocker Arms A higher than standard ratio rocker arm moves the pushrod closer to the rocker arm stud. It then becomes necessary to check the clearance between the pushrod and the head where the pushrod passes through the head. This is a very common problem and should be checked whenever a rocker arm ratio change or pushrod diameter change is made. Rocker Arm Geometry Proper rocker arm geometry is necessary to insure the maximum benefit from any cam design. Camshaft base circle, block deck height, cylinder head design, and lifter design all contribute to possible errors in geometry which must be compensated for with pushrod length. Usually, a longer than stock pushrod will be necessary in a high performance engine, but care must be taken to choose the correct length. A comprehensive explanation of the checking procedure can be found on pages Multi Groove Valves No longer is it necessary to convert to Chevrolet style single groove valves to benefit from the superior strength of COMP Cams Super Locks and the variety of spring retainers available with this lock. Super Locks are now available for the multi groove valves used in most 351C and 351M-400M applications. They are available in pairs or in sets and can be found on page 351. Hydraulic Roller Cams In those engines originally equipped with hydraulic roller camshafts, conventional flat tappet hydraulic and solid lifter cams can be used. It will be necessary when making this change to use the corresponding cam, lifter, pushrod, rocker arm, valve spring, and timing chain set. Retro-Fit Hydraulic Roller Cams COMP Cams has developed a special kit to allow the installation of hydraulic roller cams in standard Ford V-8 engines ( W, 351C, M) not originally equipped with hydraulic roller cams. This kit uses many of the same parts as the factory roller cam equipped 5.0 engines use, including the lifter guides and retention tray. This kit can be used only with specially designed COMP Cams Retro-Fit Hydraulic Roller Camshafts with special base circle size. To insure that you have the correct base circle size, install the cam, lifters, and all lifter retention hardware. Slowly rotate the camshaft, looking closely at the top of the lifter where it contacts the guide bar. As the lifters move up and down the lifter guides should remain flat on the top of the lifter bores. The lifters must not push the guides up as the lifters rise, and the lifters must not drop below the guide bar as they go all the way down. If either of these conditions exist, the base circle of the camshaft is incorrect and must be changed prior to complete installation. Camshaft Retention Bolt Most V-8 Ford engines used a 3/8 bolt to secure the upper cam gear to the cam. Almost all racing engines use a 7/16 bolt for this application. Be sure to check the compatibility of the bolt to the cam, as a 3/8 bolt in a 7/16 cam will almost certainly result in catastrophic engine failure. Most of the COMP Cams racing roller cams will come with the 7/16 hole in the cam. Camshaft Journal Diameter Many of the newer all out racing engines, especially in NASCAR, utilize a larger than standard cam bearing journal diameter. The advantages of the larger diameter are less flex and a larger base circle to smooth out the lobe design, making this a very desirable addition to any extreme racing engine. The most common sizes other than stock are: (babbit bearing, all 5 common size journals), (roller bearing, all 5 common size journals), and 2.165/1.968 (roller bearing, commonly referred to as the Large Roller Bearing ). Any of these sizes should be available, but none are interchangeable. Make sure to specify journal size when ordering your cam. If no special size is requested, the standard journal size will be chosen. Component Section This section provides an alphabetized list of all recommended valve train related components along with detailed descriptions of each product. Features, benefits and application information are listed for each line of products. Most components are available in quantities of 1, 8, 12 and 16 depending on the application. When ordering be sure to have the part number ready, followed by the quantity desired. These are just a few of the recommended components, check our component pages for the complete list of components available for your particular application. 65
10 MODULAR 4.6 & 5.4L ENGINES 4.6L & 5.4L Modular Engines In the 1980 s, Ford designed a new family of engines with the goals of improved fuel economy, better sealing, more horsepower per cubic inch, and less engine noise and vibration. Another goal was to have many components interchangeable between the SOHC and DOHC engines, thus allowing much of the engine machining and assembly to take place on the same factory line. The resulting engine family has become known as Ford Modular Engines. COMP Cams currently makes both cams and springs for the following engines in the line. 4.6L SOHC This engine first came out in the 1991 Lincoln Town Car, and later installed in the Crown Victoria, Grand Marquis, Thunderbird and Cougar. This engine has grown to become the popular 5.0 Mustang replacement. Part # L DOHC This engine showed up first in the 1993 Lincoln Mark VIII and, later, in the front-wheel drive Continental. It has since been put in performance cars such as the Mustang Cobra. 5.4L SOHC Introduced in 1997 as the Triton truck engine, this Windsor, Ontario produced engine has many parts that are interchangeable with the modular car engines. Not all parts are interchangeable, however, since the truck engines are built to handle the more severe duty that trucks undergo. Advanced 4.6L Valve Springs Designed for the Ford 4.6L from 1994 to 2000 the Single Ovate Beehive Spring is a perfect match for our cam upgrades. Part #26113 FORD 4.6L & 5.4L SOHC MODULAR (1992-PRESENT) XTREME ENERGY TING 1.825:1 SOHC-Stock replacement cam with more Hyd. Hyd to XE262H º RV power. Better torque and power. Will work with stock computer. SOHC-Mild street performance, Hyd. Hyd to XE268H º gears. Good torque and power. Will work with stock computer. Noticeable idle. SOHC-Hot street cam, gears Hyd. Hyd to XE274H º stall, computer upgrade recommended. Rough idle. SOHC-Excellent torque. Better low and mid Hyd. Hyd to XE262AH º range torque with more power. Will work with stock computer. Valve springs recommended. SOHC-Hot street cam, needs gears. Hyd. Hyd to XE270AH º stall. Intake, exhaust, computer and spring upgrade recommended. Noticeable idle. SOHC-Street/Strip, needs gears, Hyd. Hyd to XE278AH º stall. Intake, exhaust, computer and valve spring upgrade required. Rough idle. 66 XTREME ENERGY For 1999-up Performance Improvement Heads* *Note: Can also be used in Pre 99 (P.I.) Heads with retainer to guide clearance modifications and COMP Cams Valve Springs FAX
11 MODULAR 4.6 & 5.4L ENGINES What COMP Cams is doing for these late model engines. The COMP Cams engineering team has taken these great new Ford Modular Engines and pulled even more torque and power out of them. Our cams, for example, open and close the valves faster, while keeping them open longer. You can see the results in the dyno charts below for a 97 Mustang GT. The chart on the left shows the difference a XE274 Extreme Energy cam makes to the valve train. The chart on the right shows the horsepower difference 25 more hp at peak and 34 more hp at Component Section This section provides an alphabetized list of all recommended valve train related components along with detailed descriptions of each product. Features, benefits and application information are listed for each line of products. Most components are available in quantities of 1, 8, 12 and 16 depending on the application. When ordering be sure to have the part number ready, followed by the quantity desired. These are just a few of the recommended components, check our component pages for the complete list of components available for your particular application. XTREME ENERGY LIFTERS TIMING FORD 4.6L & 5.4L SOHC MODULAR (1992-PRESENT) RETAINERS N/A N/A N/A N/A Stock Stock N/A N/A N/A N/A N/A LASH CAPS REV. KIT DIST. GEARS STUD GIRDLES N/A N/A N/A N/A Stock Stock N/A N/A N/A N/A N/A N/A N/A N/A N/A Stock Stock N/A N/A N/A N/A N/A XTREME ENERGY For 1999-up Performance Improvement Heads* N/A N/A N/A N/A Stock Stock N/A N/A N/A N/A N/A N/A N/A N/A N/A Stock Stock N/A N/A N/A N/A N/A N/A N/A N/A N/A Stock Stock N/A N/A N/A N/A N/A RED S ARE THE PREMIUM CHOICE. 67
12 S FORD C.I. 8 CYL TING LIFT W/1.6 HYDRAULIC-289-smaller engine with Hyd. Hyd. 800 to H automatic, stock gears. Good torque and economy, very smooth idle. HYDRAULIC-Good for low torque in Hyd. Hyd. 800 to H Good towing in 302 automatic. Smooth idle. HYDRAULIC-Excellent combo of torque & Hyd. Hyd to H power. Best for towing in 302 stick with low gears. HYDRAULIC-Good for daily driven Hyd. Hyd to H performance vehicles. Mid-range power. Slightly lower gears. Mild rough idle. MAGNUM HYDRAULIC-Performance use. Best with Hyd. Hyd to H mild converter, headers, 9:1 compression, and lower gears. Rough idle. HYDRAULIC-Broad power stall, Hyd. Hyd to H low gears, 9.5:1 compression and headers. Rough idle. HYDRAULIC-Street / Strip use Hyd. Hyd to H stall or 4 speed 4.10:1 gear & 10.5:1 compression. Very rough idle. HYDRAULIC-Limited street use or Hyd. Hyd to H Bracket Race. 11:1 compression, 4000 stall, 4:10 or lower with good intake & exhaust. Radical idle. XTREME ENERGY HYDRAULIC-Very strong torque, excellent Hyd. Hyd. 600 to XE250H mileage, smooth idle. HYDRAULIC-Strong torque thru low end Hyd. Hyd to XE256H and mid-range, good idle. HYDRAULIC-Excellent response, good Hyd. Hyd to XE262H mid-range, stock converter, gear. HYDRAULIC- Great for Street Machine, Hyd. Hyd to XE268H stall. HYDRAULIC-Very strong torque and Hyd. Hyd to XE274H throttle response, stall. HYDRAULIC-Street / Strip, stall, Hyd. Hyd to XE284H headers, gears, has rough idle. HYDRAULIC-Pro Street / Bracket, good Hyd. Hyd to XE294H intake, headers, gear, stall. Torque Converters for Magnum and Xtreme Energy Cams Listed on page FAX
13 KITS & COMPONENTS FORD C.I. 8 CYL K SK CL RP , , K SK CL RP , , K SK CL RP , , K SK CL RP , , MAGNUM K SK CL , , K SK CL , , K SK CL , , K SK CL , , XTREME ENERGY K SK CL , , K SK CL , , K SK CL , , K SK CL , , FORD / LINCOLN / MERCURY CORPORATE SECTION K SK CL , , K SK CL , , K SK CL , , Footnotes: Master Footnote index on page Requires screw-in studs & guide plates. 2 Requires machining on cylinder heads. 3 Valve spring oil shield available. 7 Stock springs cannot be used. 33 Pre- 72 engines use part # Part #4504 studs required for 78-present use part # RED S ARE THE PREMIUM CHOICE Adjustable valve train required. 38 For 1.71:1 ratio use #RP For 1.71:1 ratio use # If equipped with studs and guide plates use part #
14 S FORD C.I. 8 CYL MARINE TING LIFT W/1.6 HYDRAULIC-Good vacuum, works Hyd. Hyd. 800 to BH with stock computer. Better torque and power. HYDRAULIC-Excellent economy, Hyd. Hyd to H pleasure and skiing use, fairly smooth idle. HYDRAULIC-Single or dual engines. Hyd. Hyd to H Best for Inboard/Outboard. Noticeable idle. HYDRAULIC-Off shore type boat. Hyd. Hyd to H Strong performance, rough idle. DUAL ENERGY TING LIFT W/1.6 HYDRAULIC-Good torque, good mileage. Hyd. Hyd to DEH Excellent low end horsepower. Smooth idle. HYDRAULIC-Very strong mid-range. Every Hyd. Hyd to DEH day performance for stock exhaust. HYDRAULIC-High performance. High end Hyd. Hyd to DEH power stall recommended. Choppy idle. NOSTALGIA PLUS Hydraulic Flat Tappet Camshaft HYDRAULIC-Sound of Ford 271HP 289 cam Hyd. Hyd to N+271H º with hydraulic lifters and increased performance. COMPUTER CONTROLLED TING LIFT W/1.6 HYDRAULIC-E.F.I. Speed Density, works with Hyd. Hyd to XE250H stock computer. Very strong torque, excellent mileage, good idle quality. DRAG RACE Hydraulic Flat Tappet Camshaft for E.F.I. HYDRAULIC-Good for 4 speed or 3500 stall Hyd. Hyd to AH :1+ compression. Torque Converters for Magnum and Xtreme Energy Cams Listed on page FAX
15 KITS & COMPONENTS MARINE LIFTERS TIMING RETAINERS FORD C.I. 8 CYL LASH CAPS REV. KIT DIST. GEARS STUD GIRDLES , N/A N/A , N/A N/A , N/A N/A , N/A N/A DUAL ENERGY K SK CL RP , , K SK CL RP , , K SK CL RP , , NOSTALGIA PLUS Hydraulic Flat Tappet Camshaft K SK CL RP , , COMPUTER CONTROLLED LIFTERS TIMING , N/A N/A N/A DRAG RACE RETAINERS Hydraulic Flat Tappet Camshaft for E.F.I. LASH CAPS REV. KIT DIST. GEARS STUD GIRDLES FORD / LINCOLN / MERCURY CORPORATE SECTION N/A N/A Footnotes: Master Footnote index on page Requires screw-in studs & guide plates. 2 Requires machining on cylinder heads. 3 Valve spring oil shield available. 7 Stock springs cannot be used. 33 Pre- 72 engines use part # Part #4504 studs required for 78-present use part # RED S ARE THE PREMIUM CHOICE Adjustable valve train required. 38 For 1.71:1 ratio use #RP If equipped with studs and guide plates use part #
16 S FORD C.I. 8 CYL MAGNUM Retro-Fit Hydraulic Roller Camshafts, For engines that DID NOT come from the factory with hydraulic roller cams, NOT FOR E.F.I. TING LIFT W/1.6 HYDRAULIC ROLLER-Smallest of the line. Hyd. Hyd to HR Best with stock engine for Street Rod or towing. Stock converter. Smooth idle. HYDRAULIC ROLLER-Mild street Hyd. Hyd to HR performance increase. Slightly noticeable idle. Stock converter. HYDRAULIC ROLLER-Great for Street Hyd. Hyd to HR Machines. Best power increase above 3500, good torque. Mild idle. HYDRAULIC ROLLER-Street Machine Hyd. Hyd to HR and limited high performance street use. Best with 4 speed and gears. Aftermarket intake & headers. HYDRAULIC ROLLER-Street / Strip only Hyd. Hyd to HR spd & 4.10 or lower gear. 9:1 comp., aftermarket intake, headers and converter. MAGNUM SOLID-Daily usage in performance to S vehicles. Broad power, good driveability, stock gear and compression. Mild rough idle. SOLID-Performance cam for Street to S Machines. Lower axle ratio and 2500 stall with headers. Rough idle. SOLID-Great for Street / Strip. 4 speed or to S automatic with 3500 stall. Intake, headers, low gears, very rough idle. 10:1 comp. SOLID-Limited Street use, with 4000 stall or to S speed, with 4.10 or lower gear. Radical idle. 11:1 comp. NOSTALGIA PLUS Mechanical Flat Tappet Camshafts Mechanical Flat Tappet Camshaft SOLID-Outstanding power & modern tight to N+271S º lash with Ford 271 HP 289 cam character. FACTORY MUSCLE COMP Cams has taken the factory muscle cam specs and reproduced them to our strict tolerances. TING LIFT W/1.6 SOLID-Factory I.D. # C30Z-6250-C for, to C30ZS º 289 cu.in , Factory 271 H.P. MAGNUM MUSCLE These cams follow the tradition of COMP Cams excellence and offer a step up from original equipment cam designs. These cams are stronger than stock and are tailored to the traditional high compression engines of the sixties and seventies, through the design techniques of today. If you need more technical assistance, call us at SOLID-Magnum Muscle Camshaft for, to S cu.in , Factory 271 H.P. Torque Converters for Magnum and Xtreme Energy Cams Listed on page Footnotes: Master Footnote index on page These cams can only be used in engines. NOT 302 H.O. blocks due to base circle size FAX
17 KITS & COMPONENTS FORD C.I. 8 CYL MAGNUM Retro-Fit Hydraulic Roller Camshafts, For engines that DID NOT come from the factory with hydraulic roller cams, NOT FOR E.F.I. K SK CL RPR , K SK CL RPR , K SK CL RPR , K SK CL RPR , K SK CL RPR , MAGNUM K SK CL , , K SK CL , , K SK CL , , K SK CL , , NOSTALGIA PLUS Mechanical Flat Tappet Camshafts Mechanical Flat Tappet Camshaft K SK CL , , FACTORY MUSCLE COMP Cams has taken the factory muscle cam specs and reproduced them to our strict tolerances. LIFTERS TIMING RETAINERS LASH CAPS REV. KIT DIST. GEARS STUD GIRDLES FORD / LINCOLN / MERCURY CORPORATE SECTION , N/A N/A N/A MAGNUM MUSCLE These cams follow the tradition of COMP Cams excellence and offer a step up from original equipment cam designs. These cams are stronger than stock and are tailored to the traditional high compression engines of the sixties and seventies, through the design techniques of today. If you need more technical assistance, call us at , N/A N/A N/A Footnotes: Master Footnote index on page Requires screw-in studs & guide plates. 2 Requires machining on cylinder heads. 3 Valve spring oil shield available. 7 Stock springs cannot be used. 12 Hi-Tech Lite Lifters. No Chamfers. 33 Pre- 72 engines use part # Part #4504 studs required for 78-present. RED S ARE THE PREMIUM CHOICE use part # For 1.7:1 ratio use # If equipped with studs and guide plates use part #
18 S FORD C.I. 8 CYL DRAG RACE Mechanical Flat Tappet Camshaft TING LIFT W/1.5 SOLID-Good torque for small engines to B stall 10:1 compression. SOLID-Best baseline race cam 10.5: to B compression, 3500 stall, good power. SOLID-Good for 4000 stall in medium to B to heavy cars 10.5:1 compression. SOLID-Light car with 4 speed or 4500 stall, to B :1 compression. MAGNUM Mechanical Roller Camshafts TING LIFT W/1.6 MECHANICAL ROLLER-Broad power to R Lower axle ratio, 2500 stall with headers. Rough idle. MECHANICAL ROLLER-Ultimate in Pro to R Street stall 4.10 or lower gear. Radical idle. DRAG RACE Mechanical Roller Camshafts TING LIFT W/1.6 MECHANICAL ROLLER-Excellent to BR torque in 11:1 engines with 4000 stall. MECHANICAL ROLLER-Easy on parts, to AR great automatic cam, must have 4500 stall. Technical assistancecamshaft and valve train Footnotes: Master Footnote index on page Requires distributor gear upgrade FAX
19 KITS & COMPONENTS DRAG RACE LIFTERS TIMING Mechanical Flat Tappet Camshaft FORD C.I. 8 CYL RETAINERS LASH CAPS REV. KIT DIST. GEARS STUD GIRDLES N/A N/A N/A N/A N/A N/A N/A N/A MAGNUM Mechanical Roller Camshafts K SK CL N/A K SK CL N/A DRAG RACE LIFTERS TIMING Mechanical Roller Camshafts RETAINERS N/A N/A LASH CAPS REV. KIT DIST. GEARS STUD GIRDLES FORD / LINCOLN / MERCURY CORPORATE SECTION Technical assistancetransmission and torque converters Footnotes: Master Footnote index on page Requires screw-in studs & guide plates. 2 Requires machining on cylinder heads. 3 Valve spring oil shield available. 6 Offset lifters available. 7 Stock springs cannot be used. 12 Hi-Tech Lite Lifters. No Chamfers use part # RED S ARE THE PREMIUM CHOICE. 75
20 S FORD 5.0L 8 CYL TING LIFT W/1.6 HYDRAULIC-Strong torque and mileage Hyd. Hyd. 800 to H in low applications. Stock replacement. Smooth idle. HYDRAULIC-Great torque for trucks, Hyd. Hyd to H WD s and towing. Best for tow vehicles with automatic and stock gears. Smooth idle. HYDRAULIC-Moderate high Hyd. Hyd to H performance street driving. Mild Street Machines, stock drive line. Noticeable idle. MAGNUM HYDRAULIC-Good for daily driven Hyd. Hyd to H performance cars. Largest cam for stock converter. Lower gears. Mild rough idle. HYDRAULIC-Excellent Street Machine Hyd. Hyd to H cam. Headers and 2000 stall with low gears. Rough idle, minimum 9:1 compression. HYDRAULIC-Great Street / Strip cam. Hyd. Hyd to H :1 compression, headers, intake, gears and 3000 stall. Very rough idle. HYDRAULIC-Ultimate cam for Pro Hyd. Hyd to H Street stall with minimum 10:1 compression and low gear. Radical idle. DUAL ENERGY HYDRAULIC-Good torque, good Hyd. Hyd to DEH mileage. Excellent high end horsepower. Smooth idle. HYDRAULIC-Very strong mid-range. Hyd. Hyd to DEH Everyday performance for stock exhaust. Noticeable idle. HYDRAULIC-High performance. Superior Hyd. Hyd to DEH high end power. Needs 2000 stall. Choppy idle. Torque Converters for Magnum and Xtreme Energy Cams Listed on page FAX
21 KITS & COMPONENTS FORD 5.0L 8 CYL K SK CL RP , K SK CL RP , K SK CL RP , MAGNUM K SK CL , K SK CL , K SK CL , K SK CL , DUAL ENERGY K SK CL RP , K SK CL RP , K SK CL RP , FORD / LINCOLN / MERCURY CORPORATE SECTION Technical assistancecamshaft and valve train Call for a free catalog Footnotes: Master Footnote index on page Requires screw-in studs & guide plates. 2 Requires machining on cylinder heads. 3 Valve spring oil shield available. 7 Stock springs cannot be used. 33 Pre- 72 engines use part # Part #4504 studs required for 78-present use part # RED S ARE THE PREMIUM CHOICE Adjustable valve train required. 38 For 1.71:1 ratio use #RP If equipped with studs and guide plates use part # Click here to advance to next section 77
ForD c.i. 8 cyl (includes 221, 260, 289 & 302) high energy Hydraulic Flat Tappet Camshafts Hydraulic Flat Tappet Camshafts
CAMSHAFTS CAMSHAFTS FORD 221-02 C.I. 8 CYL. 196-1995 (INCLUDES 221, 260, 289 & 02) high energy HYDRAULIC 289c.i. with automatic, stock gears. Good torque and economy, very smooth idle. HYDRAULIC Good for
More informationFORD 351C, 351M-400M 8 CYL
SHAFTS SHAFTS HIGH ENERGY APPLICATION / SHAFTS TING SHAFT LIFT LOBE W/1.73 SEP. ANGLE HYDRAULIC-Excellent torque and mileage. Hyd. Hyd. 800 to 4800 32-218-3 252H 252 252 206 206.468.468 110 OEM replacement.
More informationGENERAL MOTORS CORPORATE SECTION BUICK C.I. EVEN FIRE 6 CYL
BLANK PAGE SHAFTS GENERAL MOTORS CORPORATE SECTION BUICK 181-252 C.I. EVEN FIRE 6 CYL. 1978-1988 TING SHAFT LIFT W/1.55 HYDRAULIC-Excellent torque. Good Hyd. Hyd. 800 to 4200 69-115-4 240H 240 248 192
More informationHyd. Hyd to H Hyd. Hyd to H
high energy APPLICATION / HYDRAULIC Ideal for family sedans. Good low end torque and economy, smooth idle. HYDRAULIC Excellent power for towing. Good performance with highway gears, smooth idle. Hyd. Hyd.
More informationSingle-Bolt Single-Bolt. Hyd. Hyd to Single-Bolt. Hyd. Hyd to Single-Bolt
CAMSHAFTS CAMSHAFTS CHRYSLER 8-440 C.I. 8 CYL. 1959-1980 high energy HYDRAULIC Excellent torque and mileage for 8-400 2 or 4 BBL. Smooth idle. Light towing, 9:1 compression. Good OEM upgrade. HYDRAULIC
More information3 Hyd. Hyd. 800 to H Hyd. Hyd. 800 to H
CAMSHAFTS CAMSHAFTS amc/jeep/chrysler american motors 199-258 c.i. 4.0l 6 cyl. 1964-1998 HYDRAULIC Our best cam for gas mileage. Strong low end torque. Good stock replacement with very smooth idle. (NOT
More informationCHRYSLER TECH CHYRSLER TECH
CHRYSLER TECH Chrysler, one of the most dominant names during the early Muscle Car era, has developed five basic series of engines that are popular choices in racing, street performance and towing applications.
More informationLOBE RATED DURATION IN LOBE TAPPET LIFT THEORETICAL VALVE 0 Lash CAMSHAFT TYPE NUMBER DURATION DEGREES TDC ROCKER ARM RATIO
A look into the COMP Cams Master Lobe Library Since 1977, COMP Cams main goal has been to be the best in camshaft design and technology. The techniques and ideas incorporated in our camshaft designs have
More informationThe Choice of Champions
Pioneering the Camshaft Industry Since 1945 2015 Camshafts, Valvetrain, Pistons, Connecting Rods, Crankshafts, Rotating Assemblies, and More! HOWARDScams The Choice of Champions Cams & Valvetrain......................
More informationDURATION IN DEGREES LOBE LIFT DURATION IN DEGREES LOBE LIFT
NOSTALGIA PLUS SOLIDS Like the Nostalgia Plus Hydraulics, these lobes are designed to mimic the sound of the great engines of the past while improving performance by applying today's design techniques.
More informationgm ls gen iii/iv three-bolt 8 cyl present *see application chart on pages
CAMSHAFTS CAMSHAFTS gm ls gen iii/iv three-bolt 8 cyl. 1997-present *see application chart on pages 186-187 xfi rpm HYDRAULIC ROLLER Very strong torque, good mileage. Noticeable increase over stock cam.
More informationLifters - Mechanical Roller
Mechanical Roller Lifters Crane roller lifters are the standard by which all others are judged. From our first horizontal locking bar version, with patented roller shield body, to our latest Ultra Pro-
More informationHolden Camshaft Listings
Holden shaft Listings Crane s Holden V8 Holden V-8, 1969-87....................................................................... 2 Holden V-8, 1988-97.......................................................................
More informationHi-Tech & Pro Magnum Roller Rocker Arms
Hi-Tech & Pro Magnum Roller Rocker Arms Thank you for choosing COMP Cams products; we are proud to be your manufacturer of choice. Please read this complete instruction sheet carefully (including the application
More informationSee pg. 293 RPM POWER RANGE. Camshaft Series/ Grind Number LIFTERS *d
Pontiac V-8 55-81 265 (4.L)-287-01 (4.9L)-16-26-47-50- 70-89-400 (6.6L)-421-428-455 cu.in. Hydraulic Lifter Camshafts Brute low-end torque, smooth idle, daily usage, fuel economy, 1600-2200 cruise RPM,
More informationHolden Camshaft Listings
Holden shaft Listings Crane s Holden V8 Holden V-8, 1969-87....................................................................... 6 Holden V-8, 1988-97.......................................................................
More informationPrecision Degree Wheel Kit
555-81621 Precision Degree Wheel Kit Instruction Booklet Instructions for 81621 Camshaft Degree Kit Thank you for purchasing the Jegs Camshaft Degree Kit. Please follow these detailed instructions to properly
More informationBUILD YOUR OWN HIGH PERFORMANCE ENGINE
GUIDES AND KITS BUILD YOUR OWN HIGH PERFORMANCE ENGINE WHAT IS THE TOTAL POWER PACKAGE SYSTEM? To get great performance out of any engine, all of the components must work together. For over 30 years, the
More informationRoller Camshaft Installation
Installation Instructions Roller Camshaft Installation For more information, see www.cranecams.com READ CAREFULLY AND COMPLETELY BEFORE INSTALLATION Prior to installation, immerse lifters in a premium
More informationSee pg Camshaft PART NUMBER/ Emissions Code RPM POWER RANGE LIFTERS *
Chevrolet V-8 67-95 96-402-427-454 cu.in. CAMSHAFTS Application Mechanical Lifter Camshafts Excellent low end and mid range torque and HP, fair idle, moderate performance usage, bracket racing w/ heavy
More informationThe Life of a Lifter, Part 2
Basics Series: The Life of a Lifter, Part 2 -Greg McConiga Last time we looked at some complicated dynamics and compared flats to rollers. Now for the hands-on. 6 FEATURE This off-the-shelf hydraulic lifter
More informationPushrod Accessories & Rev Kits
Pushrod Accessories & Rev Kits PUSHROD GUIDE PLATES Crower s pushrod guide plates are specially hardened for added strength and durability. They are positioned on the rocker arm studs to guarantee proper
More informationFord 4.6L (2V) SPECIFICATIONS
Ford 4.6L (2V) SPECIFICATIONS General Specifications Item Specifications Silicone Gasket and Sealant F7AZ-19554-EA WSE-M4G323-A4 Premium Engine Coolant VC-4A, VC-5 in Oregon, CXC-10 in Canada ESE-M97B44-A
More informationalways the case, especially with springs produced by the OE manufacturers for production vehicles.
VALVE TRAIN About Valve Springs Valve Springs... Hardly An Open & Shut Subject! Valve springs are at least as important as any other major performance component in an engine; yet, they are probably the
More informationHeat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under 7500 rpm
PUSHRODS Small Block Chevrolet Swedged End Pushrods.080 Wall 1010 Steel Heat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under
More informationROCKER ARMS. Cutting Edge. Strength. Endurance
Cutting Edge Strength Endurance ROCKER ARMS Now COMP Cams introduces the two newest collections of roller tip rocker arms: The Ultra- Gold Aluminum Rockers and the Ultra Pro Magnum Rockers. ROCKER TECH
More information-.600" Short Standard Length or OE Hydraulic Roller Lifter Standard Length. .080" 5/16" 7.200" " Short.080" 5/16" 7.
Hi-Tech Pushrods - Listed By Application Prior to extensive research at COMP Cams, it was thought that the pushrod only had to be strong enough not to fail, bend or burn up at the ends. But engineers have
More informationEdelbrock Total Power Package
DYNO-MATCHED PARTS FOR PROVEN PERFORMANCE WITH NO GUESSWORK Edelbrock Total Power Package System PROVEN PERFORMANCE WITH NO GUESSWORK To get great performance out of any engine, the components must work
More informationM-6007-B50/B51/XE3/XB3 Engine INSTALLATION INSTRUCTIONS
Please visit www.fordracingparts.com for the most current instruction information!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE
More informationHow it Began The CUSTOMER requested it I want one of them cams that goes Thumpety-Thump Thump The Sales guy sold it The Engineers figured out how to m
Thumpr Cam Development Goals, Methodology, & Results Brian Reese Competition Cams How it Began The CUSTOMER requested it I want one of them cams that goes Thumpety-Thump Thump The Sales guy sold it The
More informationPUSHRODS. Precision. Consistency. Geometry
Precision Consistency Geometry As cam profiles get more aggressive and valve spring pressures increase, the importance of selecting the right pushrods has never been more critical. COMP Cams carries a
More informationPerformer-Plus Camshaft/Lifters/Lube Kit Part #2182 For 351-Windsor Ford V8 Engines Installation Instructions
Performer-Plus Camshaft/Lifters/Lube Kit For 351-Windsor Ford V8 Engines Installation Instructions PLEASE study these instructions carefully before installing your new camshaft. If you have any questions
More informationTORKER-PLUS Camshaft/Lifters/Lube Kit Part #5022 MODEL: c.i.d. Ford V8 (not for Boss 302 or 1985 & later roller lifter engines)
TORKER-PLUS Camshaft/Lifters/Lube Kit MODEL: 289-302 c.i.d. Ford V8 (not for Boss 302 or 1985 & later roller lifter engines) PLEASE study these instructions carefully before installing your new camshaft.
More informationHIGH PERFORMANCE FORD MODULAR EDITION
FORD MODULAR EDITION WINTER 2014 FORD MODULAR EDITION Within these pages you ll find our best selling Ford Modular Parts for Professional Engine Builders. The Ford Modular engine is Ford s overhead camshaft
More informationHOLLEY DESIGNED & BUILT!
MECHANICAL FUEL PUMPS HOLLEY DESIGNED & BUILT! The Holley line of high output mechanical fuel pumps has been completely redesigned for 2001. Their new aluminum housings save weight and all components have
More informationOVERHEAD CAM. CamQuest 6 Cam Selection Software. See Page 396
OVERHEAD CAM FORD MODULAR XTREME ENERGY 4.6 & 5.4L SOHC or DOHC These profiles are developed for use in Ford Modular engines. The.550" versions are more aggressive off the seat and have more area. The.500"
More informationCylinder Head Comparison Sheet Big Block Mopar
Cylinder Head Comparison Sheet Big Block Mopar PowerPort Series Cylinder Heads for Big Block Mopar @.700" Valve Lift PowerPort 240 240cc Street 78cc -profiled 2.190" intake; 1.760" exhaust 334 cfm intake;
More informationPerformer-Plus 5.0L Hydraulic Roller Lifter Camshaft only CATALOG #3722 MODEL: 5.0 Litre Ford V8, 1985 & later INSTRUCTIONS
Performer-Plus 5.0L Hydraulic Roller Lifter Camshaft only CATALOG #3722 MODEL: 5.0 Litre Ford V8, 1985 & later INSTRUCTIONS PLEASE study these instructions carefully before installing your new camshaft.
More informationPERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS
PERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS 60619 60639 60659 60697 60715 60719 60735 60739 60759 60849 Catalog #s 60859 60869 60879 60887
More informationPERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS CATALOG #S
PERFORMER AND PERFORMER RPM CYLINDER HEADS For Small-Block Chevrolet V8 Engines INSTALLATION INSTRUCTIONS CATALOG #S 60619 60639 60659 60697 60715 60719 60735 60739 60759 60849 60859 60869 60879 60889
More informationPERFORMER-PLUS CAMSHAFT / LIFTERS / LUBE KIT MODEL: 351-M/400 c.i.d. Ford V8 CATALOG #2172 INSTALLATION INSTRUCTIONS
PERFORMER-PLUS CAMSHAFT / LIFTERS / LUBE KIT MODEL: 351-M/400 c.i.d. Ford V8 INSTALLATION INSTRUCTIONS Please study these instructions carefully before installing your new camshaft. If you have any questions
More informationThis is my most popular Small Block Ford 347 Stroker Engine Combination
This is my most popular Small Block Ford 347 Stroker Engine Combination If you are trying to buy the most power with reliable parts for the least money, this is what I have come up with. The cast steel/iron
More informationINSTALLATION INSTRUCTIONS
PERFORMER RPM CAMSHAFT / LIFTERS / LUBE KIT For 343-401 c.i.d. AMC V8 Engines CATALOG # 7132 INSTALLATION INSTRUCTIONS PLEASE study these instructions carefully before beginning this installation. Most
More informationVisit our website at
EP 2012 NATIONWIDE DISTRIBUTION CENTERS PLUS 5 NEW Locations In Australia Alaska Anchorage 800-288-5573 Arizona Phoenix 888-272-0191 California Anaheim 800-634-0969 Los Angeles 800-995-0536 Oakland 800-234-1410
More informationModern Auto Tech Study Guide Chapters 13 & 14 Pages Engine Construction 52 Points
Modern Auto Tech Study Guide Chapters 13 & 14 Pages 182-216 Engine Construction 52 Points Automotive Service 1. The engine top end includes the cylinder, valve cover and intake & exhaust. Head, Manifolds
More informationPERFORMER RPM Camshaft/Lifters/Lube Kit CATALOG #7122 MODEL: c.i.d. Ford V8 (not for Boss 302 or 1985 & later roller lifter engines)
PERFORMER RPM Camshaft/Lifters/Lube Kit MODEL: 289-302 c.i.d. Ford V8 (not for Boss 302 or 1985 & later roller lifter engines) PLEASE study these instructions carefully before installing your new camshaft.
More informationUNDERSTANDING ROD RATIOS
UNDERSTANDING ROD RATIOS By Larry Carley, Technical Editor lcarley@babcox.com Performance engine builders are always looking at changes they can make that will give their engine an edge over the competition.
More informationNew SOLID ROLLER LIFTERS SOLID ROLLER LIFTERS. Elite Race Solid Roller Lifters. Elite Race Solid Roller Lifter Oiling Path
New Elite Race Solid Roller Lifters If you re looking for the ultimate lifter to withstand even the most demanding racing conditions, look no further. The COMP Cams Elite Race Solid Roller Lifters feature
More information165cc SBF Outlaw Street Head The Small Port, High Velocity, Emission Legal Torque Monster
165cc SBF Outlaw Street Head The Small Port, High Velocity, Emission Legal Torque Monster Head Torque---------------------------------------------65-70 Ft. Lbs. with 7/16 stud Pedestal Torque--------------------------------------------------25-30
More informationLavonia Speedway 2018 Racing Season
Lavonia Speedway 2018 Racing Season Stock 4 Cylinder- (Window Safety Net & Mufflers are Mandatory) (*note 2 engine combinations*) BODY - A. Stock auto only B. May have complete aluminum body C. Inner panel
More informationThe many different faces of the T5
The many different faces of the T5 Not all Borg Warner/TREMEC T-5's are the same. The first T-5 five speeds were introduced to market in 1980, in all things, an AMC Spirit/Concord. In 1983, T-5's were
More informationShort Block Contains. Long Block. Crankshaft Connecting Rods Pistons Camshaft Timing Gears. Same as short block plus. Cylinder heads Lifters Push Rods
Short Block Short Block Contains Crankshaft Connecting Rods Pistons Camshaft Timing Gears Long Block Same as short block plus Cylinder heads Lifters Push Rods Displacement Volume of all cylinders swept.
More informationUSST National Engine Rule Set (2010)
USST National Engine Rule Set (2010) The USST National Series combines trucks from many different origins and blends them into a racing class that includes their different features. With the high expense
More informationTABLE OF CONTENTS. Custom Camshafts Custom Camshafts Timing Components Timing Components
TABLE OF CONTENTS New Camshafts Late Model Hemi Camshafts...3 Modular Ford Camshafts...4 GM LS/Gen III Camshafts...5-8 AMC Camshafts...9 Chevrolet Small Block Camshafts...10-17 Pontiac Camshafts...18 Ford
More informationFor For more information, see
Crane Sportsman Shaft-Mount Rocker Arms are designed for serious Sportsman and Professional racers. This system was designed to take advantage of the latest developments in advanced composite materials
More informationFor more information, see
Crane Sportsman Shaft-Mount Rocker Arms are designed for serious Sportsman and Professional racers. This system was designed to take advantage of the latest developments in advanced composite materials
More informationPERFORMER RPM Camshaft/Lifters/Lube Kit CATALOG #7102 MODEL: c.i.d. Chevrolet V8, 1957 & later
PERFORMER RPM Camshaft/Lifters/Lube Kit CATALOG #7102 MODEL: 262-400 c.i.d. Chevrolet V8, 1957 & later PLEASE study these instructions carefully before installing your new camshaft. If you have any questions
More informationSTREET BIG BLOCK CHEVY
WORLD CLASS ENGINES OPTIONAL ALL-ALUMINUM MERLIN ENGINE WEIGHS ONLY 471 LBS. 509&540 There s nothing quite as in-your-face as a big-inch rat motor. With a much larger displacement than any factory big
More information2019 Street Stock Rules
Presented By 2019 Street Stock Rules 1) Car Body and Frame Any stock, production American-made vehicle including Camaro, Firebird and Mustang. Pickups will be allowed 1. Trunk pan may be removed for fuel
More informationPLATINUM SERIES PISTONS
1960 SWARTHMORE AVENUE LAKEWOOD, NEW JERSEY 08701 PLATINUM SERIES PISTONS LATE MODEL STOCK CHEVROLET FORMULA - WON DESIGN 4" BORE FLAT T TOP 23 HEAD Super lightweight design Lateral gas ports included
More informationTHANK YOU FOR PURCHASING OUR ROCKERS
THANK YOU FOR PURCHASING OUR ROCKERS We have designed and engineered these Real Chrysler rockers specifically for MOPAR wedge engines (not something modified to be close enough to work on a MOPAR). The
More informationPerformance Engine Bearings (Continued)
Performance Engine Bearings (Continued) Moly/Graphite Coated Rod Bearings Engine P Series H Series HD Series HK Series HX Series HDK Series HXK Series HXDK Series Ford (continued) 70-74 351C, 351CJ Rod
More information2 Phone: Fax: Who Are These Guys?
Who Are These Guys? Hughes Engines Inc. was formed in 1969 as Hughes Engineering, to build stock and super /stock cylinder heads for AHRA and NHRA class racing. Since then we have grown into a complete
More informationPro Iron Small Block - Technical Notes
DART Pro Iron Small Block - Technical Notes Deck Height... 9.025" Bore... 4.00" or 4.125" unfinished Main Bearing Size... 350 (2.45") & 400 (2.65") Weight... 175 lbs Largest Recommended Bore... 4.165"
More informationPERFORMANCE CATALOG. Rocker Arms Fuel Rail Kits Valve Train Stabilizers Lubricants Apparel & More!! MADE IN AMERICA AND PROUD OF IT!
PERFORMANCE CATALOG Rocker Arms Fuel Rail Kits Valve Train Stabilizers Lubricants Apparel & More!! MADE IN AMERICA AND PROUD OF IT! SHAFT MOUNT ROCKER ARMS STUD MOUNT ROCKER ARMS NEW ADJUSTABLE PEDESTAL
More informationPERFORMER RPM Camshaft/Lifters/Lube Kit CATALOG #7112 MODEL: c.i.d. Oldsmobile V8, 1967 & later
PERFORMER RPM Camshaft/Lifters/Lube Kit MODEL: 330-350-403 c.i.d. Oldsmobile V8, 1967 & later PLEASE study these instructions carefully before installing your new camshaft. If you have any questions or
More informationPERFORMER RPM Camshaft/Lifters/Lube Kit CATALOG #7102 MODEL: c.i.d. Chevrolet V8, 1957 & later
PERFORMER RPM Camshaft/Lifters/Lube Kit CATALOG #7102 MODEL: 262-400 c.i.d. Chevrolet V8, 1957 & later CAMSHAFT: Edelbrock Performer RPM camshafts are ground specifically for use with the corresponding
More informationGeneral Engine Rules Common to all Makes:
NEEDMORE SPEEDWAY 2017 CRATE LATE MODEL ENGINE RULES Engine in car must match manufacturer of body used. Example: Ford Thunderbird must run Ford Engine: Camaro must use Chevy Engine: Dodge Intrepid must
More informationjegs.com
Installation Instructions for 200000 to 200071 & 200100 to 200171 Camshafts READ CAREFULLY AND COMPLETELY BEFORE INSTALLATION WARNING: NEW LIFTERS MUST BE INSTALLED WITH YOUR NEW CAMSHAFT. Prior to installation:
More informationLIFTERS. Engineering. Durability. Power
Engineering Durability Power LIFTERS For years COMP Cams lifters have set the standard for solid roller lifter technology, but today s engine s place an even greater demand on lifters. With today s aggressive
More information1-3/4" or 1-7/8" headers Aftermarket/re-curved distributors
TORKER-PLUS Camshaft/Lifters/Lube Kit #5062 for 1967 & later 396-454 c.i.d. Chevrolet (not for use in 1965-66 396 & 427 engines requiring grooved rear journal) PLEASE study these instructions carefully
More informationPERFORMER RPM Camshaft/Lifters/Lube Kit CATALOG #7194 MODEL: c.i.d. Chrysler V8, 1968 & later
PERFORMER RPM Camshaft/Lifters/Lube Kit MODEL: 413-426-440 c.i.d. Chrysler V8, 1968 & later PLEASE study these instructions carefully before installing your new camshaft. If you have any questions, do
More informationPISTONS FOR POWER. When it comes to pistons for a high-performance. Making More Power Reliably Through Pistons Technology [TECH] By Steve Dulcich
[TECH] PISTONS FOR POWER Making More Power Reliably Through Pistons Technology By Steve Dulcich When it comes to pistons for a high-performance engine, the average builder or enthusiast looks at a limited
More information4. Hickory little engine: 3000/1350 lbs. with driver. (3050/1375 with 500 gram pistons).
2018 Limited Late Model Stock Rules $1000 fine for tire soaking $100 fine for antifreeze The Limited Late Model Limited Division will run under the 2018 NASCAR Whelen All American Series Late Model Stock
More informationGenX Street/Strip Cylinder Heads for the GM LT1
GenX Street/Strip Cylinder Heads for the GM LT1 Thank you for purchasing Trick Flow GenX Street/Strip aluminum cylinder heads for the GM LT1. Please follow the steps outlined in this instruction manual
More informationHOT PERFORMANCE PARTS FOR 2006 NEW PRODUCTS CAM HELP
HOT PERFORMANCE PARTS FOR 2006 NEW PRODUCTS CAM HELP 1.800.999.0853 W W W. C O M P C A M S. C O M HOT PERFORMANCE PARTS FOR 2006 XFI HYDRAULIC ROLLER CAMSHAFTS Electronic Fuel Injected engines have very
More informationIron Small Block - Technical Notes
DART Iron Small Block - Technical Notes Deck Height... 9.025" Bore... 4.00" or 4.125" unfinished Main Bearing Size... 350 (2.45") Weight... 175 lbs Largest Recommended Bore... 4.165" Camshaft Bearing Diameter...
More informationDART Aluminum FORD 351 Small Block Technical Notes
DART Aluminum FORD 351 Small Block Technical Notes Deck Height 9.200 & 9.500 Bore 4.00 or 4.125 unfinished Main Bearing Size 302 (2.249 ) or 351C (2.749 ) Weight. 9.200 91 lb / 9.500 93 lb Maximum bore
More informationTIMING SETS. Balanced. Accuracy. Reliability
Balanced Accuracy Reliability TIMING SETS With a variety of timing sets and components that include double roller sets, adjustable and keyway adjustable sets, belt drives and timing covers, COMP Cams carries
More informationTECH. If you liked our Danger Mouse and Major Mouse series of articles, you re gonna love this one.
TECH Here Comes Modern Mouse! Following in the immortal footsteps of both Major Mouse and Danger Mouse is none other than Modern Mouse. Here Comes Modern Mouse! If you liked our Danger Mouse and Major
More informationPerformer RPM Camshaft/Lifters/Lube Kit CATALOG #7106 MODEL: c.i.d. Ford V8
Performer RPM Camshaft/Lifters/Lube Kit MODEL: 352-428 c.i.d. Ford V8 PLEASE study these instructions carefully before installing your new camshaft. If you have any questions or problems, do not hesitate
More informationR-Series Cylinder Heads for Big Block Chevy
Overview Material TFS-41400004 A356-T6 Combustion Chamber Intake Port Exhaust Port Sizes 122cc 340cc 137cc 2.25 in. Intake, Springs 1.530 in. Dual Springs for Mechanical Flat Tappet and Hydraulic Locks
More information2019 Road Warriors. Shock claim rule will be $50. Any driver finishing in the top 3 may claim shocks from any car finishing in the top 3.
2019 Road Warriors Protest $350 top end/ $400 bottom end any engine combination Crate engine claim rule will be $3900. Any car finishing on the lead lap may claim any engine that finishes on the lead lap.
More informationSteve Brown s 427FE for SP 1696 Superformance Mk III Drivetrain Specifications Handbook
Steve Brown s 427FE for SP 1696 Superformance Mk III Drivetrain Specifications Handbook A publication of Second Strike The Superformance Owners Group Superformance Mk III Drivetrain Specifications Handbook
More informationDIDASCALIE ARTICOLO DETERIORAMENTO LIFTERS
DIDASCALIE ARTICOLO DETERIORAMENTO LIFTERS A high-energy magnet cemented on the drain plug provides an early warning of serious engine problems. It works. The first warning of a potential cam lobe failure
More information460cc Do-It-Yourself Assembly Guide
2995 Coleman St North Las Vegas, NV 89032 702-530-7753 702-643-7517 FAX VegasCarts.com 460cc Do-It-Yourself Assembly Guide *DIY Engines do not come with a warranty, these kits are intended for experienced
More information420cc Builder Modified Predator OHV engine Technical Specifications 5/27/13
BM (Builder Modified) Predator 420cc OHV engine With Electric Start Approved Engine: OHV Predator 420cc engine modified only according to these BM OHV Engine Spec. ENGINE SPEC SHEET FOR BM 420cc OHV CLASS
More informationALVE LOCKS. 7 vs SUPER 7 vs 10 VALV 7 STAMPED VALV 7 MACHINED VALV
1960 SWARTHMORE AVENUE LAKEWOOD, JERSEY 08701 VALVE LOCKS 7 vs SUPER 7 vs 10 VALV ALVE LOCKS The original stamped 7 valve lock served the industry well until drag racers discovered the Vasco Jet valve
More informationM-6007-Z363 Crate Engine Specifications and Owner's Manual
M-6007-Z363 Crate Engine Specifications and Owner's Manual!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. INSTALLATION INSTRUCTIONS: These instructions consist of (4)
More informationDART Aluminum FORD 351 Small Block Technical Notes
DART Aluminum FORD 351 Small Block Technical Notes Deck Height 9.200 Cleveland 9.500 Windsor Bore 4.00 or 4.125 unfinished Main Bearing Size Cleveland 2.749 Weight. 9.200 91 lb / 9.500 93 lb Maximum bore
More informationNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF FORD RACING PERFORMANCE PARTS. STOP! READ THIS!
STOP! READ THIS! THIS ENGINE REQUIRES RACING OIL THAT CONTAINS 1200 PPM (parts per million) ZDDP (zinc-dialkyl-dithio-phosphate). THIS ENGINE IS SHIPPED WITHOUT OIL! Page 1 of 6 Please contact the Tech
More informationAdvanced Auto Tech. ASE A 1 Test Preparation Engine Upper End Theory & Service
Advanced Auto Tech ASE A 1 Test Preparation Engine Upper End Theory & Service Torque to yield bolts stretch to their yield point when tightened and should not be reused. True or False The sealing lip &
More informationPERFORMER-PLUS Camshaft/Lifters/Lube Kit #2177 MODEL: c.i.d. Chrysler V8, 1967 & later (Not for 1985 & later 318 V8 with roller lifters)
PERFORMER-PLUS Camshaft/Lifters/Lube Kit #2177 MODEL: 318-360 c.i.d. Chrysler V8, 1967 & later (Not for 1985 & later 318 V8 with roller lifters) PLEASE study these instructions carefully before installing
More information2018 Junior Sprint Rules
2018 KidSprint Engine Rules Briggs World Formula 2018B All parts must be Briggs & Stratton factory production parts unless otherwise noted in these rules. No machining, polishing or alteration of any parts
More informationInstallation Instructions And Warranty Information
Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 FAX 909.599.6424 Installation Instructions And Warranty Information 1964 1/2 to 73 Ford Mustang/Mercury
More information2018 PURE STOCK RULES
2018 PURE STOCK RULES PROTEST: 1. Engine Top $300 bottom $300 2. 602 Crate Engine $350 Top $400 Bottom 3. $100 per shock Claim Rule top three only 4. Tire Protest $100 (one tire) top three only 5. CRATE
More informationFORD Cleveland/Windsor/ Fontana - with Timing Chain
LOWE Industries PO Box 180 Rosewood, Qld 4340 Australia www.kenlowe.com.au Phone 0411-699 535 Fuel Pump Drive Kit FORD Cleveland/Windsor/ Fontana - with Timing Chain To drive a fuel pump on a FORD engine
More information2013 Senoia Raceway Rulebook
2013 Senoia Raceway Rulebook E-mail tech questions to: johnnywalls31@yahoo.com BOMBER RULES BODY 1. All bodies must be stock steel bodies. No fiberglass or aluminum body panels allowed. Fenders and quarter
More informationHere s the smokin sendoff
Smokin Barracuda Barracuda in Action Schumacher B/RB Headers are designed for excellent street performance. But recently we ran some track tests, using Steve Charette s (of Imperial Services) 68 Barracuda,
More informationPERFORMER-PLUS Camshaft/Lifters/Lube Kit CATALOG #2157 MODEL: c.i.d. Pontiac V8, 1965 & later
PERFORMER-PLUS Camshaft/Lifters/Lube Kit CATALOG #2157 MODEL: 350-455 c.i.d. Pontiac V8, 1965 & later CAMSHAFT: Edelbrock Performer-Plus camshafts are ground specifically for use with the corresponding
More information