Ball Valves George Fischer Type 5, 54, 55 COLORO Ball Valves The George Fischer Type 5, 54, and 55 plastic ball valves feature: monobloc structure provides high safety level: user cannot dissassemble or adjust compact and space saving low torque General The George Fischer Type 5, 54, and 55 COLORO ball valves are ideal for most industrial applications. The hightech design, with monobloc structure provides a high level of safety user cannot disassemble or adjust. two piece body, permanently fused around an integral ball and stem eliminates stem blowout and ball position backlash. utomated manufacturing with integrated quality control offers uniform performance and low torque. Rugged PVC construction. Piping stress transmitted through integral body, not end connectors or ball. Technical Features Sizes /" to ", NPT threaded or solvent cement socket Pressure rating: psi socket, 50 psi threaded Valve position indication visible, with or without lever handle Ideal sealing materials: ball seat from PTFE; stem, and seat backing O-rings from EPM or FPM Ball seat backing O-rings compensate for seal wear; no readjustment necessary; uniform, low torque. Short overall length Short laying length Low profile Few component parts EPM or FPM Seals (except Type 54) low cost Safety The ball position is also visible on the shaft when the handle is withdrawn. 0 5 4. Compact body. Ball and shaft in one piece. Ball seal 4. Backing seal 5. Union end seal. Shaft seal Closed position Open position 0.7
H imensions and for Type 5 Compact Ball Valve PVC with STM solvent cement socket psi/ bar Inch wt. H L Z EPM FPM lbs. Z Z L (threaded) L (socket) Z socket laying length Z threaded laying length / 5 4 5 5 0..07.97.0.04.9 /4 5 4 5 5 0...5.8.5.5 5 44 5 54 0.0..7.4 4..87 /4 5 45 5 55 0.49 4.57 4.55.0 4.9.9 / 5 4 5 5 0.8 4.57 5.04.7 5.5.0 5 47 5 57.4 5.5.0 4.00.0.7 PVC with NPT threads 50 psi/0 bar Inch wt. H L Z EPM FPM lbs. / 5 5 7 0..07.97.0.7.4 /4 5 5 7 0...5.8.0.8 5 4 5 74 0.0..7.4.7.0 /4 5 5 5 75 0.49 4.57 4.55.0 4.8.50 / 5 5 7 0.8 4.57 5.04.7 4..8 5 7 5 77.4 5.5.0 4.00 5.7.8 H imensions and for Type 54 Single Union Ball Valve PVC with STM solvent cement socket psi/ bar Inch wt. H L Z EPM FPM* lbs. Z Z / 54 4 N/ 0..07.97.0.5.8 /4 54 4 N/ 0...5.8 4.0.0 54 44 N/ 0.44..7.4 4.5.0 /4 54 45 N/ 0.74 4.57 4.55.0 5..7 / 54 4 N/.0 4.57 5.04.7 5.7.97 54 47 N/.90 5.5.0 4.00.54.54 L (threaded) L (socket) PVC with NPT threads 50 psi/0 bar Inch wt. H L Z EPM FPM * lbs. / 54 N/ 0..07.97.0.9.84 /4 54 N/ 0...5.8.57.0 54 4 N/ 0.44..7.4 4.09.9 /4 54 5 N/ 0.74 4.57 4.55.0 4.74.95 / 54 N/.0 4.57 5.04.7 5.0.4 54 7 N/.90 5.5.0 4.00. 4.7 *500 pc. minimum order required 0.74
imensions and for Type 55 True Union Ball Valve Ball Valves H Z PVC with STM solvent cement socket psi/ bar Inch wt. H L Z EPM FPM lbs. / 55 8 55 9 0.9.07.97.0.74. /4 55 8 55 9 0.40..5.8 4..0 55 84 55 94 0.57..7.4 4.59.7 /4 55 85 55 95.00 4.57 4.55.0 5.9.5 / 55 8 55 9.9 4.57 5.04.7 5.7.5 55 87 55 97.8 5.5.0 4.00.9.8 Z socket laying length Z threaded laying length Z L PVC with NPT threads 50 psi/0 bar Inch wt. H L Z EPM FPM lbs. / 55 55 7 0.9.07.97.0..59 /4 55 55 7 0.40..5.8 4.09.9 55 4 55 74 0.57..7.4 4.45. /4 55 5 55 75.00 4.57 4.55.0 5.0.70 / 55 55 7.9 4.57 5.04.7 5.79 4.9 55 7 55 77.8 5.5.0 4.00.89 5.00 Valve Ends and Nuts-PVC Fits type 54, 55 Ball Valves and 4 iaphragm Valves Inch STM socket NPT thread Metric socket Metric Nuts Part number Part number Part number / 7 0 00 70 5 7 00 0 0 7 90 00 /4 7 0 007 70 57 7 00 07 5 7 90 007 7 0 008 70 58 7 00 08 7 90 008 /4 7 0 009 70 59 7 00 09 40 7 90 009 / 7 0 00 70 0 7 00 0 50 7 90 00 7 0 0 70 7 00 0 7 90 0 0 Component Parts for Valve Body Inch O-Rings EPM O-Rings FPM Size/ash # / 748 40 04 749 40 04 (.5x8) /4 748 40 749 40-0 748 40 0 749 40 0-7 /4 748 40 07 749 40 07 - / 748 40 00 749 40 00-8 748 40 0 749 40 0-0.75
imensions and for Type 5 Compact Ball Valve Polypropylene with metric fusion socket ends 50 psi/0 bar, black handle d N wt. H L z Closest EPM lbs. 0 5 7 5 00 0..07.9.0.8.57 / 5 0 7 5 00 0....8.9.9 /4 5 7 5 004 0...48.48..4 40 7 5 005 0.7 4.57.07.0 4.7.80 /4 50 40 7 5 00 0.5 4.57.54.7 4.7.95 / 0 50 7 5 007.07 5.5 4.7.98 5.79. Minimum order quantites required; consult factory for details H z L Component Parts for Type 5 Polypropylene daptor socket, PP Rp (British Std. pipe threads) daptor nipple, PP NPT (male threads) d-rp / 0 /" 77 90 5 /4" 77 90 7 " 77 90 8 40 /4" 77 90 9 50 /" 77 90 70 " 77 90 7 daptor nipple, PP NPT (female threads) d-npt / 0 /" 77 94 5 5 /4" 77 94 57 " 77 94 58 40 /4" 77 94 59 50 /" 77 94 0 " 77 94 d-npt / 0 /" 77 94 55 5 /4" 77 94 557 " 77 94 558 40 /4" 77 94 559 50 /" 77 94 50 " 77 94 5 Hoze nozzle, PP d 0 77 90 40 5 77 90 407 77 90 408 40 77 90 409 50 77 90 40 77 90 4 daptor nipple, PP (male BSP threads) d-r / 0 /" 77 90 50 5 /4" 77 90 507 " 77 90 508 40 /4" 77 90 509 50 /" 77 90 50 " 77 90 5 0.7
imensions and for Type 55 True Union Ball Valve Ball Valves Polypropylene with metric fusion socket ends 50 psi/0 bar, black handle d N wt. H L L z Inch EPM lbs. d L z L H 0 5 7 55 0 0..07.9.0...5 / 5 0 7 55 0 0.0..4.8 4.0..7 /4 5 7 55 04 0.44..5.44 4.9.48.87 40 7 55 05 0.75 4.57.07.0 4.7.84. /4 50 40 7 55 0 0.95 4.57.50.7 5...50 / 50 7 55 07.7 5.5 4.7 4.0.0.58.98 Minimum order quantites required; consult factory for details Polypropylene with IR/butt fusion ends 50 psi/0 bar, black handle d N wt. H Lz L Inch EPM lbs. d H 0 5 7 55 08 0..07.9.0 7.40. / 5 0 7 55 08 0.0..4.8 7.95. /4 5 7 55 084 0.44..5.44 8..48 40 7 55 085 0.75 4.57.07.0 9..84 /4 50 40 7 55 08 0.95 4.57.50.7 9.9. / 50 7 55 087.7 5.5 4.7 4.0 0.9.58 Minimum order quantites required; consult factory for details L Lz Valve body (without handle) Polypropylene EPM/PTFE incl. union end seal d N Inch O-Rings EPM d N ash # 0 0 5 7 48 00 / 5 0 7 48 0 /4 5 7 48 0 40 7 48 0 /4 50 40 7 48 04 / 50 7 48 05 0 5 748 40 04 (.5x8) 5 0 748 40-0 5 748 40 0-7 40 748 40 07-50 40 748 40 00-8 50 748 40 0 - Component parts for valve body Union nuts PP glass-fiber reinforced Union ends PP socket fusion ISO/IN 0 77 90 40 5 77 90 407 77 90 408 40 77 90 409 50 77 90 40 77 90 4 0 77 00 0 5 77 00 07 77 00 08 40 77 00 09 50 77 00 0 77 00 Union ends spigot PP for IR/butt fusion 0 77 08 5 5 77 08 57 77 08 58 40 77 08 59 50 77 08 50 77 08 5 0.77
: Compact ball valve Types 5 and 55 Ball Valves Colored handles for greater safety and clear identification Green handle Ball valve / 0 7 48 45 /4 5 7 48 4 7 48 4 -/4 40 7 48 47 -/ 50 7 48 47 7 48 48 Red handle Ball valve / 0 7 48 0 /4 5 7 48 7 48 -/4 40 7 48 -/ 50 7 48 7 48 Many system operators require clear identification of the individual pipelines. With the compact ball valve modular system we offer a choice of 7 colors for clear and unmistakable identification. The ball valves can also be retrofitted with these colored handles. The standard handles supplied with the valve cannot be returned. : Yellow handle Ball valve / 0 7 48 55 /4 5 7 48 5 7 48 5 -/4 40 7 48 57 -/ 50 7 48 57 7 48 58 Closed position Blue handle Ball valve / 0 7 48 090 /4 5 7 48 09 7 48 09 -/4 40 7 48 09 -/ 50 7 48 09 7 48 09 0 White handle Ball valve / 0 7 48 570 /4 5 7 48 57 7 48 57 -/4 40 7 48 57 -/ 50 7 48 57 7 48 57 Open position Safety The ball position is still visible on the shaft when the handle is withdrawn. Black handle Ball valve / 0 7 48 50 /4 5 7 48 5 7 48 5 -/4 40 7 48 5 -/ 50 7 48 5 7 48 5 Orange handle Ball valve / 0 7 48 575 /4 5 7 48 57 7 48 57 -/4 40 7 48 577 -/ 50 7 48 577 7 48 578 0.79
Product Specification for Type 5 Compact Ball Valve - PVC The PVC compact ball valve, Type 5, /" through ", shall have either solvent socket or NPT threaded pipe connections. The valve shall have a two-piece body, permanently fused around the integral ball and stem. The valve shall have low, uniform torque to complement factory preadjusted performance specifications. Construction prevents user ability to disassemble or adjust. The stem shall indicate valve position if handle is removed. Handles are available in five colors for color-coding capabilities of handling different fluids. Material shall meet or exceed the requirements of 454-B according to the classifications and requirements of STM 784. Socket end connection dimensions shall conform to STM 47. Threaded pipe connections shall be in accordance with STM 44 which references NSI B.0. (was B.) for tapered pipe threads. The valve, Type 5, shall have PTFE ball seats with EPM or FPM seals. The valve with solvent cement socket ends shall carry a pressure rating of psi at 7 F. Valve with threaded ends, 50 psi at 7 F. as supplied by George Fischer, Inc., Tustin, C 9780. Product Specification for Type 54 Single Union Coloro Ball Valve - PVC The PVC Coloro ball valve, Type 54, / " through ", shall have either solvent socket or NPT threaded pipe connections with a single, true union end. The valve shall have a two-piece body, permanently fused around the integral ball and stem. The valve shall have low, uniform torque to complement factory preadjusted performance specifications. Construction prevents user ability to disassemble or adjust. The stem shall indicate valve position if handle is removed. Handles are available in five colors for color-coding capabilities of handling different fluids. Material shall meet or exceed the requirements of 454-B according to the classifications and requirements of STM 784. Socket end connections are suitable for IPS pipe. Threaded pipe connections shall be in accordance with STM 44 which references NSI B.0. (was B.) for tapered pipe threads. The valve, Type 54, shall have PTFE ball seats with EPM or FPM seals. The valve with solvent cement socket ends shall carry a pressure rating of psi at 7 F. Valve with threaded ends, 50 psi at 7 F. as supplied by George Fischer, Inc., Tustin, C 9780. Product Specification for Type 55 True Union Coloro Ball Valve - PVC The PVC Coloro ball valve, Type 55, / " through ", shall have either solvent socket or NPT threaded pipe connections with double true union ends. The valve shall have a two-piece body, permanently fused around the integral ball and stem. The valve shall have low, uniform torque to complement factory preadjusted performance specifications. Construction prevents user ability to disassemble or adjust. The stem shall indicate valve position if handle is removed. Handles are available in five colors for color-coding capabilities of handling different fluids. Material shall meet or exceed the requirements of 454-B according to the classifications and requirements of STM 784. Socket end connections are suitable for IPS pipe. Threaded pipe connections shall be in accordance with STM 44 which references NSI B.0. (was B.) for tapered pipe threads. The valve, Type 54, shall have PTFE ball seats with EPM or FPM seals. The valve with solvent cement socket ends shall carry a pressure rating of psi at 7 F. Valve with threaded ends, 50 psi at 7 F. as supplied by George Fischer, Inc., Tustin, C 9780. 0.80
Technical ata for Ball Valves Pressure/Temperature iagrams Ball Valves ll pressures are given in atmospheric excess pressure values. mbient temperature max. F/50 C. Safety factors for selected Thermoplastics Based on a 50 year operating life at 8 F/0 C with water Material Safety factor PVC.5 CPVC.75 PVF PP. Pressure in bar Temperature F 8 04 40 7 48 84 5 5, 54, 55 socket PVC; 4, 0 socket PVC & 7.5 CPVC; 4, 0 fusion socket PVF, manual 4 valves only 0 0 9 8 7 5 4 0 PVC ll other manual and actuated ball valves CPVC CPVC PP PVF 88.5 74 59.5 45 0.5 0.5 87 7.5 58 4.5 9 4.5 0 0 0 0 0 40 50 0 70 80 90 00 0 0 0 40 Temperature C Pressure in psi Bolt tightening torque values for flanged joints Type 4 Inch / /4 /4 / Type 70 Inch / 4 in-lbs. 77 04 in-lbs. 54 Torque for all ball valve types -pound 708 9 5 44 54 Torque 5 77 88 70 5 5 7 /8 & / /4 /4 / / 4 /0 5 40 50 75 90 0 0 d 80 Nm 70 0 50 40 0 0 0 8 4 Torque 0 0.5
Flow Characteristics for Ball Valves Types 4, 4, 50, 5, 54, 55, 70, 50 Flow factor kv/cv 00 % 90 80 70 0 50 40 0 0 0 0 0 0 0 40 50 0 70 80 90 00 % % open for Vertical -way Ball Balve (L-port) Type 4 (see type 4 vertical and horizontal for additional flow charts) Flow factor kv/cv 00 % 90 80 70 0 50 40 0 0 0 0 0 0 0 40 50 0 70 80 90 00 % % open for Metering Ball Valve Type Flow factor kv/cv 00 % 90 80 70 0 50 40 0 0 0 0 0 0 0 40 50 0 70 80 90 00 % % open 0.
Pressure Loss Characteristics Ball Valves Cv/kv Values Inch Cv kv d / 4.0 / 8 4.97 7 /.95 85 0 / 4 4.50 50 5 49.0 700 / 4 70.0 000 40 /.04 00 50 7.08 00 / 50.00 5000 75 490.00 7000 90 4 770.00 000 0 0.00 000 0 bar 4.5 psi 5 psi gal.785 liters for Ball Valves Types 4, 4, 5, 54, 55, 70, 50 Pressure Loss p (bar) /8" / d / N 0 /" / d 0 / N 5 /4" / d 5 / N 0 " / d / N 5 -/4" / d 40 / N -/" / d 50 / N 40 Flow Rate (l/min) " / d / N 50 -/" / d 75 / N 5 " / d 90 / N 80 4" / d 0 / N 00 " / d 0 / N 50 Fluid: Water 8 F/0 C 0 Pressure Loss p (psi) 0 - /8" / d / N 0 /" / d 0 / N 5 " / d / N 5 /4" / d 5 / N 0 -/4" / d 40 / N " / d / N 50 -/" / d 50 / N 40 Fluid: Water 8 F/0 C 0 0-0 0 0 Flow Rate (gal/min) Cv/kv Values Inch Cv kv d for -way Ball Valve Type 4 (Vertical, L-port Ball) / 8"-" / 8.4 49 / 5.9 77 0 / 4 0. 4 5 8.0 0 / 4 0.0 47 40 / 4.70 7 50 90.54 9 bar 4.5 psi 5 psi gal.785 liters Pressure Loss p (bar) /8" / d / N 0 /4" / d 5 / N 0 /" / d 0 / N 5 " / d / N 5 -/4" / d 40 / N Flow Rate (l/min) " / d / N 50 -/" / d 50 / N 40 Fluid: Water 8 F/0 C 0.7
Cv/kv Values Inch Cv kv for -way Ball Valve Type 4 (Vertical, L-port Ball) / "-4".E+00 / 9. 990 85.5 50 4 07. 490.E-0 4" & " " -/" Pressure loss p [bar].e-0.e-0 Medium: water 8 F/0 C.E-04.E+0.E+0.E+0.E+04 Flow rate [l/min] Cv/kv Values for Metering Ball Valve Type Inch Cv kv d / 8.77 /.40 0 0 bar 4.5 psi 5 psi gal.785 liters Pressure Loss p (bar) /8" / d / N 0 /" / d 0 / N 5 Fluid: Water 8 F/0 C Flow Rate (l/min) Q Cv p to determine flow rate at higher p's. /" metering ball valve /8" metering ball valve Flow Rate (gal/min) 8 7 5 4 P 7 psi P 8 psi P 9 psi P.5 psi Flow Rate (gal/min) 5 4.4 P 57 psi.. P 7 psi P psi. 0 5 0 45 0 P P 57 psi P 7 psi P psi 0 0 0 40 0 80 00 0 40 0 80 0 0 5 0 45 0 75 90 05 0 5 50 5 80 ngle of Opening ngle of Opening 0.8