LED FLEXIBLE LINEAR UP STATIC SERIES UP DESCRIPTION UP is a commercial grade modular lighting system featuring a wide range of plug-together accessories and a variety of control options. This unique feature eliminates the need for field soldering; providing easy and simple installations. Made of highly flexible material that can be applied to most accessible surfaces using 3M doublesided tape. FEATURES Low power consumption, low heat. Optional aluminum mounting channel with clear and diffused lens covers that snap into the channel without tools. No ultra violet (UV/IR) radiation. No mercury. For a 90 bends or tighter, do so at the cutting mark. To make a 90 joint connection use the X- CONN connector, which can be trimmed for 2-way L connection or 3-way T connection. APPLICATIONS Cove and soffit lighting Path and contour marking Display lighting Under-shelf and under-cabinet lighting Accent and edge lighting Backlighting Signage SPECIFICATIONS Model Color Temperature UP-30 3000-3300K UP-40 4000-4300K UP-60 6000-6500K UP-R UP-Y UP-G UP-B Red Yellow Green Blue Wattage (per ft) 1.4W 1.4W 1.4W 0.9W 0.9W 1.4W 1.4W Lumens (per ft) 50lm 55lm 60lm 29lm 29lm 39lm 20lm Efficacy (lm/w) 36 39 43 32 32 28 14 CRI 80 75 70 - - - - Beam Angle 120 Input Voltage Lamp Life Dimensions 24V DC 50,000 hours 11-7/8 L x 3/8 W x 1/8 H per section LEDs (per ft) 18 LED Spacing 5/8 Operating Temp 22 F - 185 F Max Run* 30 Wiring Min Run Mounting Environment Certifications Warranty 2-Wire 6 LEDs, ~4 (White, Blue, Green) 9 LEDs, ~6 (Red, Yellow) Clips or Channel Indoor, Dry RoHS 5 Years see published warranty terms for detailed information. * Single runs cannot exceed 30. For longer runs refer to the wiring diagram. Cuts can only be made on the cutting mark. View accessories page for more information. ORDERING INSTRUCTIONS Example: SERIES MODEL COLOR DL FLEX UP 30 UP is packed in 30 roll lengths. May be ordered in 1 increments. Specify amount of 1 lengths before ordering number for Example: 25 x UP-30 Page 1 of 1
LED FLEXIBLE LINEAR UP STATIC SERIES UP PHOTOMETRIC DATA WIRING DIAGRAMS (For detailed wiring see UP Installation Instructions) Page 2 of 2
LED FLEXIBLE LINEAR UP STATIC SERIES UP FLEX Series Power Supply Guide for Max Runs If the Max Load of a power supply exceeds the fixture's Max Run, then you may install multiple runs per given power supply. Wattage = Max power capacity of power supply. Max Load = Fixture quantity a power supply can power. Max Run = Maximum length of a single fixture. UP UP UPHO UP-RGB Hard-Wire Power Supplies W W WH W-RGB (Junction Box Included) White, Green, Blue Red, Yellow 1.4 W/Ft 0.9 W/Ft 3 W/Ft 3.2 W/Ft Model Number Wattage Max Run Max Load Max Run Max Load Max Run Max Load Max Run Max Load PS - 20 / 24 - JB 20 30 ft 14.3 ft 30 ft 22.2 ft 20 ft 6.7 ft 20 ft 6.3 ft PS - 60 / 24 - JB 60 30 ft 42.9 ft 30 ft 66.7 ft 20 ft 20.0 ft 20 ft 18.8 ft PS - 100 / 24 - JB 96 30 ft 68.6 ft 30 ft 106.7 ft 20 ft 32.0 ft 20 ft 30.0 ft PS - 150 / 24 - JB 150 30 ft 107.1 ft 30 ft 166.7 ft 20 ft 50.0 ft 20 ft 46.9 ft PS - 320 / 24 - JB 312 30 ft 222.9 ft 30 ft 346.7 ft 20 ft 104.0 ft 20 ft 97.5 ft PS - 120 / 24 - JB 2 x 60* 30 ft 2 x 42.9 ft 30 ft 2 x 66.7 ft 20 ft 2 x 20 ft 20 ft 2 x 18.8 ft PS - 180 / 24 - JB 3 x 60* 30 ft 3 x 42.9 ft 30 ft 3 x 66.7 ft 20 ft 3 x 20 ft 20 ft 3 x 18.8 ft PS - 200 / 24 - JB 2 x 96* 30 ft 2 x 68.6 ft 30 ft 2 x 106.7 ft 20 ft 2 x 32 ft 20 ft 2 x 30 ft PS - 25 / 24 - DIM-JB 25 30 ft 17.9 ft 30 ft 27.8 ft 20 ft 8.3 ft Not applicable * Consists of multiple power supplies. Hybrid power supply with dimming capability. Dimming requires 0-10V dimmer (DVTV). UP UP UPHO UP-RGB Plug & Play Power Supplies W W WH W-RGB White, Green, Blue Red, Yellow 1.4 W/Ft 0.9 W/Ft 3 W/Ft 3.2 W/Ft Model Number Wattage Max Run Max Load Max Run Max Load Max Run Max Load Max Run Max Load PS - WP 24 / 24 24 30 ft 17.1 ft 30 ft 26.7 ft 20 ft 8.0 ft 20 ft 7.5 ft PS - 24 / 24 24 30 ft 17.1 ft 30 ft 26.7 ft 20 ft 8.0 ft 20 ft 7.5 ft PS - 48 / 24 48 30 ft 34.3 ft 30 ft 53.3 ft 20 ft 16.0 ft 20 ft 15.0 ft PS - 60 / 24 60 30 ft 42.9 ft 30 ft 66.7 ft 20 ft 20.0 ft 20 ft 18.8 ft PS - 90 / 24 90 30 ft 64.3 ft 30 ft 100.0 ft 20 ft 30.0 ft 20 ft 28.1 ft Notes : Wattage must be de-rated if power supply operates at max temperature range. Refer to specification sheets for more information. DIMMERS AMPLIFIERS LC-DIM5A Plug & Play Dimmer LC-200-RPT Power Repeater Built-in 0-10V dimming control Use for extending runs Compatible with dimmers LC-DIM5A-HW PS-DV-TV LC-DIM100-RF Hard-Wire Dimmer Requires separate 0-10V dimmer (See PS-DV-TV) Wall-Plate Dimmer 0-10V dimmer Used with LC-DIM5A-HW or PS-25/24-DIM Replaces PS-DS-TV Plug & Play Remote Dimmer Step Dimming Page 3 of 3
LED FLEXIBLE LINEAR UP STATIC SERIES UP PLUG & PLAY ACCESSORIES PC PC2 19" Input Power Connector 14" Input Power Connector (13-1/4" Cable / 5-7/8" UP tape) (13-1/4" Cable / 3/8" UP tape) Male DC plug connects to equipment with female DC Male DC plug connects to equipment with female DC plug (e.g.: PS power supply, PS accessories) plug (e.g.: PS power supply, PS accessories) UP tape accepts UP connector. May be UP tape accepts UP connector. May be used as a "Live End" connector for UP used as a "Live End" connector for UP PT X-CONN 14" Output Power Connector Universal, L, X & T connector (13-1/4" Cable / 1/2" UP tape with Connects up to four FLEX strips UP connector) Cut to make 2-way "L" connection Female DC plug connects to equipment with male DC or 3-way "T" connection plug (e.g.: LC-200-RPT, PS accessories) UP connector accepts UP tape UP-4-(B/G/30/40/60) UP-6-(R/Y) 4" Linear Strip with UP connectors on both ends 6" Linear Strip with UP connectors on both ends May be connected to cut ends May be connected to cut ends Readily accepts end of UP Readily accepts end of UP Output: Blue, Green, 3000K, 4000K, 6000K Output: Red, Yellow Max Watt: 0.46W Max Watt: 0.7W CC6 6" Flexible mid-connector To reach across or hide behind gaps CC12 12" Flexible mid-connector To reach across or hide behind gaps HARD-WIRE ACCESSORIES PC-HW PC2-HW 19" Input Power Connector 12" Input Power Connector (13-1/2" Bare Wire / 5-7/8" UP tape) (11-1/4" Bare Wire / 3/8" UP tape) (e.g.: PS power supply, PS accessories) (e.g.: PS power supply, PS accessories) UP tape accepts UP connector UP tape accepts UP connector May be used as a "Live End" connector for UP May be used as a "Live End" connector for UP PT-HW 13" Output Power Connector (6-7/8" Bare Wire / 6" UP tape with UP connector) (e.g.: LC-200-RPT, PS accessories) UP connector accepts UP tape Page 4 of 4
LED FLEXIBLE LINEAR UP STATIC SERIES UP MOUNTING ACCESSORIES CH6 Aluminum Mounting Channel 6'L x 1/2"W x 1/3"H CH-CLIP Mounting Clip for CH6 Recommended 24" between Clips for most installations. (Sold as a pair). DC6 FL6 Clear acrylic lens to protect FLEX Frosted acrylic lens to protect FLEX 91.5% light transmittance, 1% haze 85% light transmittance, 4% haze Length: 6' Length: 6' For use with CH6 For use with CH6 LLMFH-C/C-CH6 LLMFH-C/W-CH6 Mounting Channel for carpet to carpet installation Mounting Channel for carpet to wood/tile installation Includes clear lens Includes clear lens Field cuttable Field cuttable Length: 6' Length: 6' CH-LE End cap for CH6 Hole allows cable to pass through For use with PC2, PC2-HW, PT, or PT-HW. CH-EC End Cap for CH6 Use for a finished look Page 5 of 5