Product description Standard number Temperature level Pressure level enclosures B5 mm Opis proizvoda Broj norme Tlačni razred čelika čelika čelika LIM-MONT d.o.o. MB: 3449874 poduzece za proizvodnju limenih proizvoda, trgovinu i usluge VRBNOVEC, B.Radica 8, 42232 Donji Martijanec, HRVTSK (CROTI) Telefon: +385 (0)42 40 51 40 E-mail: info@lim-mont.hr Telefax: +385 (0)42 40 51 44 Internet stranica: http://www.lim-mont.hr DIMOVODNI PROGRM 0036 CPD 91265 001 Declaration of conformity with requests for system metal chimneys according to EN 1856-1 Manufacturer: LIM-MONT d.o.o. Product mark: ECO DIM DW VRBNOVEC, B.Radića 8 42232 Donji Martijanec, CROTI Tel.: +385 (0) 42 40 51 40; Fax: +385 (0) 42 67 31 44 E-mail: info@lim-mont.hr Internet page: http//www.lim-mont.hr Name and function of responsible person: Mr. Ivan Međeral, manager Ridlerstraße 65, 80339 München, Germany uthorized institution: TÜV SÜD Industrie Service GmbH Number of certificat / year: 0036 CPD 91265 001 / valid until 31.03.2012. Marking off attendant documents according to EN 1856 1 annex Z, table Z 2 01. Metal system chimney EN 1856-1 T200 P1 D V2 L50050 O(00) Doublewall stainless steel chimney with 25mm stone wool insulation 02. Metal system chimney EN 1856-1 T400 N1 D V2 L50050 G(70) Doublewall stainless steel chimney with 25mm stone wool insulation 03. Metal system chimney E N 1856-1 T200 P1 W V2 L50050 O(00) Doublewall stainless steel chimney with 25mm stone wool insulation 04. Metal system chimney E N 1856-1 T400 N1 W V2 L50050 G(70) Doublewall stainless steel chimney with 25mm stone wool insulation Condensate resistance (W: wet ili D: dry) Corrosion resistance (durability against corrosion) Examined material: 1.4404, thickness 0,5 mm Sootfire resistance (G: yes or O: no) and distance to conbusible material (in mm) Compressive strength without distortion: DN 80 4,91 kn; DN 200 7,08 kn; DN 400 6,18 kn; Tensile strength: DN 80 1,23 kn and DN 200 1,68 kn with clamp S1-23,5mm,and DN 400 2,14 kn with clamp S4-100mm Compressive strength of console: DN 80 11,04 kn; DN 250 12,65 kn; DN 600 11,04 kn Wind load resistance: Free end above last holder: 2,5 m for DN 80 and DN 200 with clamp S1,and 3 m for DN 400 with clamp S4 Flexural tensile strength: Non vertical instalation: biggest distance betveen two holders 3 m for DN 80 with clamp S1, and 4 m for DN 200 with clamp S1 and DN 400 with clamp S4 Gas tightness: Satisfy standard criteria for all diameters. Results given in enclosures B2 Thermal resistance: From 0,242 m 2 K/W to 0,296 m 2 K/W at 200ºC for diameters from DN 80 to DN 600. Results given in Condensate penetration resistance: Steadily without changes on surface Izjava o sukladnosti sa zahtjevima na sistemske metalne dimnjake prema normi EN 1856-1 Proizvođač: LIM-MONT d.o.o. Oznaka proizvoda: ECO DIM DW VRBNOVEC, B.Radića 8 42232 Donji Martijanec, HRVTSK Tel.: +385 (0) 42 40 51 40; Fax: +385 (0) 42 67 31 44 E-mail: info@lim-mont.hr Internet stranica: http//www.lim-mont.hr Ime i funkcija odgovorne osobe: gosp. Ivan Međeral, direktor Ridlerstraße 65, 80339 München, Njemačka Nadležna institucija: TÜV SÜD Industrie Service GmbH Broj certifikata / godina: 0036 CPD 91265 001 / vrijedi do 31.03.2012. Označavanje popratnih dokumenata prema EN 1856 1 dodatak Z, tablica Z 2 01. Metalni sistemski dimnjak EN 1856-1 T200 P1 D V2 L50050 O(00) Duplostjeni dimnjak od nerđajučeg čelika sa 25mm izolacijom od kamene vune 02. Metalni sistemski dimnjak EN 1856-1 T400 N1 D V2 L50050 G(70) Duplostjeni dimnjak od nerđajučeg sa 25mm izolacijom od kamene vune 03. Metalni sistemski dimnjak EN 1856-1 T200 P1 W V2 L50050 O(00) Duplostjeni dimnjak od nerđajučeg sa 25mm izolacijom od kamene vune 04. Metalni sistemski dimnjak EN 1856-1 T400 N1 W V2 L50050 G(70) Duplostjeni dimnjak od nerđajučeg sa 25mm izolacijom od kamene vune Temperaturni razred Razred postojanosti na kondenzat (W: vlažno ili D: suho) Otpornost na koroziju materijala dimovodnih cijevi (postojanost protiv korozije) Ispitivani materijal: 1.4404, debljine 0,5 mm Postojanost na požar čađe (G: da ili O: ne) Udaljenost do gorive površine (u mm) Tlačna čvrstoća bez deformacije: DN 80 4,91 kn; DN 200 7,08 kn; DN 400 6,18 kn; Vlačna čvrstoća: DN 80 1,23 kn i DN 200 1,68 kn s obujmicom S1-23,5 mm, a DN 400 2,14 kn s obujmicom S4-100 Tlačna čvrstoća konzole: DN 80 11,04 kn; DN 250 12,65 kn; DN 600 11,04 kn Otpornost opterećenju vjetrom: Slobodni kraj iznad zadnjeg držača: 2,5 m za DN 80 i DN 200 s obujmicom S1, a 3 m za DN 400 s obujmicom S4 Otpornost na savijanje: Horizontalna montaža: najveće odstojanje između dva držača 3 m za DN 80 s obujmicom S1, a 4 m za DN 200 s obujmicom S1 i DN 400 s obujmicom S4 Plinopropusnost: Zadovoljava norme za sve promjere. Rezultati su dani u prilozima B2 Otpornost provođenju topline: Od 0,242 m 2 K/W do 0,296 m 2 K/W pri 200ºC za promjere od DN 80 do DN 600. Rezultati su dani u prilozima B5 Otpornost na kondenzat: Postojano nema promjena na površini Z VS, MI TO RDIMO NJBOLJE! FOR YOU, WE DO IT BEST! travanj, 2006.
Dimovodni program Flue production line DIMOVODNI PROGRM Flue production line Toplinu potrebnu za zagrijavanje dobivamo izgaranjem krutog, tekućeg ili plinovitog goriva. Kod izgaranja bilo koje vrste goriva, javljaju se različiti neželjeni produkti izgaranja, koji su smjesa različitih plinovitih i krutih tvari. Uvriježeni naziv za produkte izgaranja je dim, koji na adekvatan način mora biti odveden. Za proces odvodnje dima koriste se različiti dimovodni elementi, koji spojeni u svrsishodnu cjelinu čine dimnjak. Prema načinu upotrebe dimovodni program u LIM-MONT-u podijeljen je u tri zasebne skupine i to; jednostjeni dimovodni elementi (za sanaciju dimnjaka), izolirani (troslojni) dimovodni elementi (za gradnju novih dimnjaka) i priključni elementi (za povezivanje peći s dimnjakom). Zajednička odlika našeg dimovodnog programa je; jednostavna i brza montaža, otpornost na vlagu i kiseline, vatrootpornost, relativno mala masa, visoka kvaliteta i povoljne cijene. ) 2) Izolirani (troslojni) dimovodni elementi 3) Priključni elementi 4) Jednostjeni dimovodni element: na navoj 7) Koaksijalni dimovodni elementi 9) Priključni element: za peći na kruto gorivo Temperature necessary for heating can be obtained by combustion of solid, liquid or gaseous combustibles. s a result of combustion of any kind of combustible, different undesirable combustion products composed of gaseous and solid substances can be produced. The usual designation for combustion products is fume, which should be adequately vented. For the process of venting different flue components can be used, which, if connected in appropriate entirety, compose a chimney. LIM-MONT has divided its flue products into three separate groups, according to their use: single wall flue components (for relining of chimneys), insulated (three-layer) flue components (for construction of new chimneys) and fittings (for connecting of stoves to chimneys). The common distinctive feature of our flue production line is as follows: simple and quick assembly, moisture and acid resistance, fire resistance, relatively small weight, high quality and convenient prices. ) 2) Insulated (three-layer) flue components 3) Fittings 4) - threaded joitns 7) Coaxial flue components 9) Fittings for solid fuel stores 1
JEDNOSTJENI DIMOVODNI ELEMENTI Koriste se za sanaciju postojećih dimnjaka. Sanacija dimnjaka je potrebna u slučaju promjene ložišta (pojava kondenzacije), pogrešnog presjeka i oblika te oštećenja postojećeg dimnjaka. Jednostjeni dim. elementi su izrađeni iz nehrđajučeg čeličnog lima i kao takvi otporni su na kiseline koje nastaju pri kondenzaciji. Kod spajanja dim. elemenata koriste se gumene brtve i spojnice. Tako spojeni dim. elementi nepropusni su za vodu i dimne plinove. Kod nemogućnosti spajanja dim. elemenata sa spojnicom, koriste se drugi spojevi (spojevi s navojem). Elementi su relativno male mase, što im omogućava brzo zagrijavanje i postizanje radne temperature. Montaža dim. elemenata kod sanacije je vrlo jednostavna i vrši se sa krova, spuštajući elemente u otvor postojećeg dimnjaka pri čemu je potreba za građevinskim radovima unutar objekta svedena na minimum. Sve navedene karakteristike ukazuju da su jednostjeni dimovodni elementi najekonomičnija rješenja pri sanaciji postojećih dimnjaka. Used for relining of existing chimneys. Relining is necessary in case of furnace replacement (occurrence of condensation), wrong chimney section and form, as well as in case of a damaged chimney. are made up of stainless steel, and are resistant to acids produced during condensation. Rubber seals and couplings are used when joining flue components, so that flue components are waterand fume gasses-tight. If couplings cannot be used, other types of joining components are used (threaded joints). Components are of relatively small weight, which allows their quick heating and reaching of desired work temperature. The assembly of flue components for the purpose of relining of chimneys is very simple. It is performed from the roof by lowering down the components into the cavity of the existing chimney. That reduces the necessary masonry works inside the facility to the minimum. ll the aforementioned characteristics underline the fact that the single wall flue components are the most economic solution for relining of existing chimneys. MTERIJL / MTERIL: Vrsta / Type: [ifra i debljina materijala (xxx-xxxx): Debljina / Thickness: Material code and thickness (xxx-xxxx): INOX 316 L B (W.Nr. 1.4404 2R) s = 0,5 mm I10-0050 INOX 316 L B (W.Nr. 1.4404 2R) s = 0,6 mm I10-0060 INOX 316 L B (W.Nr. 1.4404 2R) s = 0,7 mm I10-0070 INOX 316 L B (W.Nr. 1.4404 2R) s = 1,0 mm I10-0100 INOX 316 L B (W.Nr. 1.4404 2R) s = 1,5 mm I10-0150 PREPORUČLJIV I MINIMLN DEBLJIN MTERIJL PREM PROMJERU D: Recommended and minimal material thickness with respect to diameter D: Promjer D (mm) / Diameter D (mm) 80-300 350-500 550-750 800-1000 Debljina materijala Material thickness Preporučljiva / Recommendable s = 0,5 mm s = 0,6 mm s = 0,7 mm s = 1,0 mm Minimalna / Minimal s = 0,5 mm s = 0,5 mm s = 0,6 mm s = 0,6 mm 2
Spojevi dim. cijevi (muški i ženski dio): - do promjera 400 mm (spoj s gumicom i spojnicom S1) [tip proširenja S1] - od promjera 450 mm (spoj bez gumice sa spojnicom S4) [tip proširenja S4] Primjer narudžbe: dimovodna cijev dužine 500 mm, promjera (D=200 mm), materijal (INOX 316 L B), debljine (s=0,5 mm), tip proširenja S1 Joining of flue pipes (male and female caps): - up to 400 mm diameter (rubber and coupling S1 joining) [expanding type S1] - up to 450 mm diameter (joining without rubber and coupling S4) [expanding type S4] Sample order: Flue pipe, 500 mm in length, diameter (D=200 mm), material (stainless steel 316 LB), thickness (s=0.5 mm), expansion type S1 BROJ RTIKL / ITEM NUMBER 020 I10-0050 0200 S1 020 xxx-xxxx yyyy tp Grupa elemenata Components group Broj elementa Component no. Tip proširenja Expansion type Upisati promjer D (mm) Insert diameter D (mm) Upisati šifru materijala Insert material code NPOMEN: - ostali materijali, promjeri kao i specijalne izvedbe po dogovoru NOTE: - other materials, diameters and special requirements upon agreement Podaci su informativnog karaktera. Lim-mont d.o.o. zadržava pravo izmjene podataka u bilo koje vrijeme bez prethodne najave. Data are for informational purposes. Lim-mont d.o.o. reserves the right to revise these regulations at any time and without prior notice. 3
DIMOVODN CIJEV Element mt 1.00 LDC1000 010 xxx-xxxx yyyy tp L1 950 950 950 950 950 950 950 950 950 DIMOVODN CIJEV Element mt 0.50 L1 950 950 950 950 950 950 950 950 950 LDC500 DIMOVODN CIJEV Element mt 0.25 020 xxx-xxxx yyyy tp L1 450 450 450 450 450 450 450 450 450 L1 450 450 450 450 450 450 450 450 450 LDC250 030 xxx-xxxx yyyy tp L1 200 200 200 200 200 200 200 200 200 L1 200 200 200 200 200 200 200 200 200 REGULIRJUĆ DIMOVODN CIJEV 400-580 mm Variable element from 400 to 580 mm LRDC 400-580 050 xxx-xxxx yyyy tp L1 350 350 350 350 350 350 350 350 350 L2 530 530 530 530 530 530 530 530 530 L1 350 350 350 350 350 350 350 350 350 L2 530 530 530 530 530 530 530 530 530 4
REGULIRJUĆ DIMOVODN CIJEV S SPOJNICOM Variable element with clamp LRDCB 060 xxx-xxxx yyyy tp L1 448 448 448 448 448 448 448 448 448 L1 448 448 448 448 448 448 448 448 448 DIMOVODN CIJEV S MONTIRNIM VRTIM - VUČEN Element with inspection cover - extractable LDCOV+V 080 xxx-xxxx yyyy tp D 80 90 100 110 D1 120 120 120 120 L 50 50 50 50 L1 345 345 345 345 L2 80 80 80 80 L3 235 235 235 235 L4 80 80 80 80 H 175 175 175 175 H1 115 115 115 115 DIMOVODN CIJEV S MONTIRNIM VRTIM - VUČEN Element with inspection cover - extractable LDCOV+V 080 xxx-xxxx yyyy tp D 120 130 140 150 160 180 L 50 50 50 50 50 50 L1 283 283 283 283 283 283 H 175 175 175 175 175 175 H1 115 115 115 115 115 115 DIMOVODN CIJEV S MONTIRNIM VRTIM Element with inspection cover LDCOV+V 080 xxx-xxxx yyyy tp D 200 220 230 250 280 300 300 400 L 50 50 50 50 50 50 50 50 L1 283 283 283 283 283 283 283 450 H 175 285 285 285 285 285 285 285 H1 115 190 190 190 190 190 190 190 5
POČETNI DIMOVODNI ELEMENT - MUF sa strane (Tip ) Starting element with lateral condensate drainage (Type ) LPDE 090 xxx-xxxx yyyy tp L1 100 100 100 100 100 100 100 100 100 L1 100 100 120 120 120 120 120 120 120 KOMOR Cinders pocket with lateral condensate drainage LKOMOR 120 xxx-xxxx yyyy tp L1 383 383 383 383 383 383 383 383 383 H 175 175 175 175 175 175 175 175 175 H1 115 115 115 115 115 115 115 115 115 L1 383 383 570 570 570 570 570 570 570 H 175 175 285 285 285 285 285 285 285 H1 115 115 190 190 190 190 190 190 190 ODVJČ KONDENZT S MUF - om N SREDINI Condensate drainage LPDE 130 xxx-xxxx yyyy tp L1 75 75 75 75 75 75 75 75 75 L1 75 75 75 75 75 75 75 75 75 6
ODVJČ KONDENZT S MUF - om ILI CIJEVČICOM S STRNE Condensate drainage - lateral LOKBM (140 ili / or 150) xxx-xxxx yyyy tp D 80 90 100 110 120 130 L 50 50 50 50 50 50 L1 75 75 75 75 75 75 D 140 150 160 180 200 - L 50 50 50 50 50 - L1 75 75 75 75 75 - SPOJNI KOMD S PLOČOM Intermediate supporting plate LSKP 160 xxx-xxxx yyyy tp L1 200 200 200 200 200 200 200 200 200 H 220 220 220 220 220 220 220 220 280 H1 180 180 180 180 180 220 220 220 220 L1 200 200 200 200 200 200 200 200 200 H 280 310 330 330 350 410 410 450 500 H1 260 270 300 300 330 370 370 420 460 ELEMENT Z KONTROLU DIM BEZ TERMOMETR I PLOČE NOSČ TERMOMETR (Na zahtjev kupca montiramo ploču-nosač termometra) Smoke control element (without the thermometer plate) LEKD 170 xxx-xxxx yyyy tp L1 450 450 450 450 450 450 450 450 450 H 240 240 240 240 240 240 240 240 240 H1 140 140 140 140 140 140 140 140 140 L1 450 450 450 450 450 450 450 450 450 H 240 285 285 285 285 285 285 285 285 H1 140 190 190 190 190 190 190 190 190 7
ELEMENT Z MJERENJE TEMPERTURE DIM Smoke sampling element LEMTD 175 xxx-xxxx yyyy tp L1 200 200 200 200 200 200 200 200 200 L1 200 200 200 200 200 200 200 200 200 VUČENI T KOMD 90 Extractable TE 90 connection LTK90 D<300mm 180 xxx-xxxx yyyy zzzz tp D1 D 60 80 90 100 110 120 130 140 150 160 180 200 220 230 250 280 300 60 80 90 100 110 120 130 140 150 160 180 200 220 230 250 280 300 50 50 50 50 50 50 50 50 L1 250 250 250 250 333 333 333 333 333 500 500 500 500 500 500 500 500 T KOMD 90 TE 90 connection D(yyyy) mm D1(zzzz) mm LTK90 D OZNK Z OZNK NRUDŽBU Z NRUDŽBU / ZEICHEN / FÜR ORDERING BESTELLUNG CODE 180 xxx-xxxx yyyy zzzz tp D1 350 400 350 400 L 50 50 L1 500 600 8
T KOMD 90 reducirani TE 90 connection reduced LRTK90 200 xxx-xxxx yyyy zzzz tp D1 D 60 80 90 100 110 120 130 140 150 160 180 200 220 230 250 280 300 60 80 90 100 110 120 130 140 150 160 180 200 220 230 250 280 300 50 50 50 50 50 50 50 50 L1 250 250 250 250 333 333 333 333 333 500 500 500 500 500 500 500 500 D(yyyy) mm D1(zzzz) mm VUČENI T KOMD 45 Extractable TE 45 connection T KOMD 45 TE 45 connection D 300mm bez / without: (90, 110, 220, 230, 280) LRK45 210 xxx-xxxx yyyy tp D 80 100 120 130 140 150 160 180 200 250 300 50 50 L1 350 350 400 400 450 450 450 450 500 530 650 H 139 156 173 182 190 199 207 224 241 284 327 H1 123 130 142 145 149 153 157 143 160 159 210 H2 197 221 245 257 269 281 293 317 341 402 642 H3 262 286 314 326 338 350 362 367 401 442 537 H4 100 100 100 100 100 100 100 100 100 100 100 H5 120 95 110 95 130 120 100 95 105 100 100 D 350mm plus / plus: (90, 110, 220, 230, 280) D 90 110 220 230 280 350 400 L 50 50 50 50 50 50 50 L1 350 400 530 530 600 675 760 H 147 165 258 267 310 369 400 H1 126 138 157 161 168 183 210 H2 209 233 366 378 439 522 640 H3 247 303 416 428 478 552 640 H4 100 100 100 100 100 100 150 H5 110 125 220 105 115 100 95 9
VUČENI T KOMD S PRSTENOM N ZSUN TE extractable with gear on bar LTKPNZ 230 xxx-xxxx yyyy tp D1 D 60 80 90 100 110 120 130 140 150 160 180 200 220 230 250 280 300 60 80 90 100 110 120 130 140 150 160 180 200 220 230 250 280 300 50 50 50 50 50 50 50 50 L1 200 200 200 200 283 283 283 283 283 450 450 450 450 450 450 450 450 PRSTEN N ZSUN Z T KOMD Reduction gear on bar for TE 90 LPROLUNG 255 xxx-xxxx yyyy tp D 80 90 100 110 120 130 140 150 L 120 120 120 120 120 120 120 120 H 110 120 130 140 150 160 170 180 D 160 180 200 220 230 250 280 300 L 120 120 120 120 120 120 120 120 H 190 210 230 250 260 280 310 330 ZTVRČ CIJEVI S RUČICOM N ZSUN Z T KOMD Plug with handle for TE with gear on bar LZCRZ 257 xxx-xxxx yyyy D 80 90 100 110 120 130 140 150 L 15 15 15 15 15 15 15 15 H 110 120 130 140 150 160 170 180 D 160 180 200 220 230 250 280 300 L 15 15 15 15 15 15 15 15 H 190 210 230 250 260 280 310 330 10
ZTVRČ CIJEVI S GUMOM (SILIKONSKOM) Z T KOMD Expansion plug LZTG 260 xxx-xxxx yyyy D 80 90 100 110 120 130 L 20 20 20 20 20 20 D 140 150 160 180 200 - L 20 20 20 20 20 - ZTVRČ CIJEVI S RUČICOM Plug with handle for TE LZCR 270 xxx-xxxx yyyy D 80 90 100 110 120 130 140 150 L 50 50 50 50 50 50 50 50 L1 100 100 100 100 100 100 100 100 D 160 180 200 220 230 250 280 300 L 50 50 50 50 50 50 50 50 L1 100 100 100 100 100 100 100 100 ZTVRČ CIJEVI PERFORIRNI Perforated plug LZCPP 280 xxx-xxxx yyyy 11
T KOMD S KOLJENOM TE with elbow (concentric) LTKVK 290 xxx-xxxx yyyy zzz tp D1 D 200 250 300 100 120 130 150 L 50 50 50 L1 450 450 450 KOLJENO TRODIJELNO 90 Elbow 90 (3-segment) OSNI POMCI Shift of axis LDKB90 310 xxx-xxxx yyyy tp H 104 109 114 119 124 129 134 139 144 H1 154 159 164 169 174 179 184 189 194 H 154 164 174 179 189 204 214 239 264 H1 204 214 224 229 239 254 264 289 314 D 80 90 100 110 120 130 140 L 50 50 50 50 50 50 50 F 252 262 272 282 292 302 312 G 252 262 272 282 292 302 312 F (250) 252 262 272 282 292 302 312 G (250) 452 462 472 482 492 502 512 F (500) 252 262 272 282 292 302 312 G (500) 702 712 722 732 742 752 762 F (1000) 252 262 272 282 292 302 312 G (1000) 1202 1212 1222 1232 1242 1252 1262 D 150 160 170 180 200 210 220 L 50 50 50 50 50 50 50 F 322 332 342 352 372 382 399 G 322 332 342 352 372 382 399 F (250) 322 332 342 352 372 382 399 G (250) 522 532 542 552 572 582 599 F (500) 322 332 342 352 372 382 399 G (500) 772 782 792 802 822 832 849 F (1000) 322 332 342 352 372 382 399 G (1000) 1272 1282 1292 1302 1322 1332 1349 D 230 250 280 300 350 400 L 50 50 50 50 50 50 F 409 429 459 479 529 579 G 409 429 459 479 529 579 F (250) 409 429 459 479 529 579 G (250) 609 629 659 679 729 779 F (500) 409 429 459 479 529 579 G (500) 859 879 909 929 979 1029 F (1000) 409 429 459 479 529 579 G (1000) 1359 1379 1409 1429 1479 1529 12
KOLJENO DVODIJELNO 45 Elbow 45 (2-segment) LDKB45 330 xxx-xxxx yyyy tp H 122 126 129 133 137 140 144 147 151 H1 71 72 74 75 77 78 80 81 83 H 158 165 172 175 182 193 200 218 236 H1 85 88 91 93 96 100 103 110 118 Naziv artikla / OSNI POMCI Shift of axis D 80 90 100 110 120 130 140 L 50 50 50 50 50 50 50 F 261 268 276 283 289 297 304 G 103 106 109 112 115 118 121 J 210 215 220 225 230 235 240 K 160 165 170 175 180 185 190 F (250) 413 410 417 424 431 433 445 G (250) 250 253 256 258 261 264 267 F (500) 580 586 594 600 608 615 622 G (500) 426 429 432 435 438 441 444 F (1000) 934 940 947 954 961 968 976 G (1000) 779 783 786 789 792 794 798 D 150 160 170 180 200 210 220 L 50 50 50 50 50 50 50 F 361 368 375 382 396 403 410 G 129 132 135 138 143 146 149 J 245 250 255 260 270 275 280 K 195 200 205 210 220 225 230 F (250) 452 459 466 474 488 495 502 G (250) 270 273 276 279 285 288 291 F (500) 629 636 643 650 664 672 679 G (500) 447 450 453 456 462 465 467 F (1000) 983 990 997 1004 1018 1025 1032 G (1000) 801 803 806 809 815 818 822 D 230 250 280 300 350 400 L 50 50 50 50 50 50 F 417 432 453 467 503 538 G 152 158 167 173 187 202 J 285 295 310 320 345 370 K 235 245 260 270 295 320 F (250) 509 523 544 558 594 629 G (250) 294 299 308 314 329 343 F (500) 686 700 721 735 771 806 G (500) 470 476 485 491 506 520 F (1000) 1039 1053 1075 1089 1124 1159 G (1000) 824 830 839 845 859 874 13
KOLJENO DVODIJELNO 30 Elbow 30 (2-segment) Naziv artikla / OSNI POMCI Shift of axis LDK30 340 xxx-xxxx yyyy tp H 137 139 142 144 147 149 152 154 157 H1 49 50 51 51 52 53 53 54 56 H 162 167 172 174 179 187 192 204 217 H1 56 57 59 59 61 63 64 67 71 D 80 90 100 110 120 130 140 L 50 50 50 50 50 50 50 F 351 356 361 366 371 376 381 G 76 77 78 80 81 82 83 F (250) 474 479 584 589 494 499 504 G (250) 181 182 183 185 186 187 189 F (500) 691 695 701 706 711 716 721 G (500) 306 307 308 310 311 312 313 F (1000) 1124 1128 1134 1139 1149 1153 1198 G (1000) 556 557 558 560 561 562 563 D 150 160 170 180 200 210 220 L 50 50 50 50 50 50 50 F 387 391 397 401 404 405 421 G 85 86 87 89 90 90 94 F (250) 509 514 520 524 527 528 544 G (250) 190 191 193 194 194 195 199 F (500) 726 731 735 741 743 745 761 G (500) 315 316 317 319 320 320 324 F (1000) 1158 1163 1168 1173 1176 1178 1193 G (1000) 565 566 567 569 570 570 574 D 230 250 270 280 300 350 400 L 50 50 50 50 50 50 50 F 426 433 446 451 461 486 511 G 95 97 101 102 103 111 118 F (250) 549 556 569 574 584 609 634 G (250) 201 202 206 207 210 217 223 F (500) 766 772 786 791 801 825 851 G (500) 326 327 331 333 335 341 348 F (1000) 1198 1205 1219 1224 1234 1234 1284 G (1000) 576 577 581 583 585 585 598 Ostale varijante koljena, te druge dimenzije istih moguče su prema dogovoru. Other alternates elbow and others dimensions same according agreement. KOLJENO S OTVOROM I POKLOPCEM TRODIJELNO 90 Elbow 90 with inspection hole and metal LDKOB90 360 xxx-xxxx yyyy zzzz tp H 104 109 114 119 124 129 134 139 144 H1 154 159 164 169 174 179 184 189 194 H 154 164 174 179 189 204 214 239 264 H1 204 214 224 229 239 254 264 289 314 14
KOLJENO S OTVOROM I ZTVRČEM S GUMOM (SILIKONSKOM) 90 Elbow 90 with inspection hole and expansion plug LDKOZG90 REBRSTO KOLJENO 90 Elbow 90 370 xxx-xxxx yyyy tp D 80 90 100 110 120 130 L 50 50 50 50 50 50 H 127 134 140 146 152 159 H1 177 184 190 196 202 209 D 140 150 160 180 200 - L 50 50 50 50 50 - H 165 171 177 190 202 - H1 215 221 227 240 252 - LDKREB90 380 xxx-xxxx yyyy tp D 80 100 120 130 140 150 160 180 200 H 130 150 160 165 170 175 180 190 200 H1 160 180 210 215 220 225 230 240 250 REBRSTO KOLJENO 45 Stamped elbow 45 LDKREB45 390 xxx-xxxx yyyy tp D 80 100 120 130 140 150 160 180 200 H 162 169 176 180 184 187 191 198 205 H1 91 95 98 99 101 101 102 106 108 REGULIRJUĆE ČETVERODIJELNO KOLJENO OD 0-90 (S GUMICOM) Swivel elbow 0-90 Impermeable - 99,99% Rubber LDKR 400 xxx-xxxx yyyy tp D 80 90 100 110 120 130 140 L 50 50 50 50 50 50 50 L1 290 300 305 310 320 330 335 H 110 115 120 125 130 135 140 H1 160 165 170 175 180 185 190 D 150 160 180 200 220 230 250 L 50 50 50 50 50 50 50 L1 335 345 355 395 420 435 450 H 140 145 155 175 180 185 200 H1 190 195 205 225 230 135 250 15
REGULIRJUĆE ČETVERODIJELNO KOLJENO S OTVOROM I ZTVRČEM S GUMOM (SILIKONSKOM) Swivel elbow with inspection cover and expansion plug LDKRZCNG 420 xxx-xxxx yyyy tp D1 D 80 90 100 110 120 130 140 150 160 180 200 80 90 100 110 120 130 140 150 160 180 200 50 50 H 148 155 163 172 181 190 200 209 218 235 254 H1 170 177 184 191 199 206 214 221 228 243 258 REDUKCIJ KONUSN CENTRIČN Cone reduction LRKC D1 (yyyy) D1 - D> 20 mm 430 xxx-xxxx yyyy zzzz tp D1 D 80 90 100 110 120 130 140 150 160 180 200 220 230 250 280 300 350 400 60 80 90 100 110 120 130 140 150 160 180 200 220 230 250 280 300 350 400 50 50 50 50 50 50 50 50 50 REDUKCIJ RVN CENTRIČN Flat reduction LRRC D1 (zzzz) 450 xxx-xxxx yyyy zzzz tp D1 D 80 90 100 110 120 130 140 150 160 180 200 220 230 250 280 300 350 400 60 7 0 80 90 100 110 120 130 140 150 160 180 200 220 230 250 280 300 350 400 50 50 50 50 50 50 50 50 50 16
PRIJELZ KVDRTNO/OKRUGLO Reduction quadratic/rounded LTRMOGGI 455 xxx-xxxx yyyy D 200 200 250 250 250 300 300 L 50 50 50 50 50 50 50 L1 250 250 250 250 250 250 250 H 250 300 300 300 300 400 450 D 300 350 350 400 400 400 L 50 50 50 50 50 50 L1 250 250 250 250 250 250 H 450 400 450 450 500 500 Naziv artikla / rtikelbezeichung Item name REDUKCIJ KONUSN EKSCENTRIČN Eccentric reduction LRE D1 (zzzz) 465 xxx-xxxx yyyy zzzz tp D1 D 80 90 100 110 120 130 140 150 160 180 200 220 230 250 280 300 350 400 60 80 90 100 110 120 130 140 150 160 180 200 220 230 250 280 300 350 400 50 50 50 50 50 50 50 50 50 Naziv artikla / Item name SPOJNIC F1 Pipe clamp type F1 LF1 475 xxx-xxxx yyyy D 80 90 100 110 120 130 L 15 15 15 15 15 15 D 140 150 160 180 200 - L 15 15 15 15 15 - SPOJNIC S1 Pipe clamp type S1 LS1 470 xxx-xxxx yyyy D 80 90 100 110 120 130 L 15 15 15 15 15 15 H 25 25 25 25 25 25 D 140 150 160 170 180 200 L 15 15 15 15 15 15 H 25 25 25 25 25 25 17
SPOJNIC S2 (spojnica za regulirajuće dimovodne cijevi) Pipe clamp type S2 (for regulated element) LS2 480 xxx-xxxx yyyy SPOJNIC S4 Pipe clamp type S4 LS4 490 xxx-xxxx yyyy D 220 230 250 280 300 350 400 L 106 106 106 106 106 106 106 H 65 65 65 65 65 65 65 Naziv artikla / Item name SPOJNIC Z UPUŠTNJE Centring collar LSUP 500 xxx-xxxx yyyy H 48 48 48 48 48 48 48 48 48 H1 15 15 15 15 15 15 15 15 15 H 48 48 48 48 48 48 48 48 48 H1 15 15 15 15 15 15 15 15 15 SPOJNIC - STBILIZTOR CIJEVI Stabling collar LSSC 510 xxx-xxxx yyyy aa 18
SPOJNIC Z SJLU Collar for braces LSZS 520 xxx-xxxx yyyy L 40 40 40 40 40 40 40 40 40 L 40 40 40 40 40 40 40 40 40 ZIDNI DRŽČ Z JEDNOSTIJENE DIMNJKE Wall collar for single wall flue liners min = 50 mm D= 80... 200 mm max = 100 mm D= 80... 110 mm max = 150 mm D= 120... 200 mm LZDJ 530 xxx-xxxx yyyy D 80 90 100 110 120 130 L 33 33 33 33 33 33 D 140 150 160 180 200 - L 33 33 33 33 33 - REGULIRJUĆI ZIDNI DRŽČ Wall collar LZDR 540 xxx-xxxx yyyy D 80 90 100 110 120 130 140 150 L 40 40 40 40 40 40 40 40 H 90 90 100 100 105 130 135 155 D 160 180 200 220 230 250 280 300 L 40 40 40 40 40 40 40 40 H 160 180 195 220 220 200 260 260 19
KONZOL Wall bracket LKONZOL 560 xxx-xxxx yyyy L 220 220 220 220 220 220 220 220 220 L1 180 180 180 180 180 180 180 180 180 L 280 310 330 330 350 410 410 450 500 L1 280 310 310 310 350 410 410 460 500 PLOČ Plate LPLOČ 570 xxx-xxxx yyyy L L1 L 220 220 220 220 220 220 220 220 220 L1 180 180 180 180 180 180 220 220 220 L 220 310 330 330 350 410 410 450 500 L1 220 270 300 300 300 370 370 420 460 CIJEV S PLOČOM Condensate collecting plate LCP DILETCIJSK ROZET S PLOČOM Dilatation rossete LDKJ 580 xxx-xxxx yyyy L 333 333 333 333 333 333 333 333 450 H 150 150 150 150 150 150 150 150 150 L 450 450 450 450 500 500 500 550 600 H 150 150 150 150 150 150 150 150 150 H1 (aaa) i H2 (bbb) - po zahtjevima konstrukcije H1 (aaa) i H2 (bbb) - according to request 590 xxx-xxxx yyyy aaa bbb L1 250 250 250 250 250 250 250 250 250 L1 250 250 250 250 250 250 250 250 250 20
RVNI OPŠV Flat chimney weathering LRO 600 xxx-xxxx yyyy L 150 150 150 150 150 150 150 150 150 L 150 150 150 150 150 150 150 150 150 KOSI OPŠV 5-30 djustable chimney weathering from 5-30 LKO5-30 610 xxx-xxxx yyyy L 150 150 150 150 150 150 150 150 150 L 150 150 150 150 150 150 150 150 150 KOSI OPŠV 30-45 djustable chimney weathering from 30-45 LKO30-45 620 xxx-xxxx yyyy L 150 150 150 150 150 150 150 150 150 L 150 150 150 150 150 150 150 150 150 ŠEŠIR Weatherproof narrow band LŠ 630 xxx-xxxx yyyy L 65 65 65 65 65 65 65 65 65 L 65 65 65 65 65 65 65 65 65 21
PROTUKIŠN KP Rain cap LPK 640 xxx-xxxx yyyy L1 110 110 110 110 110 110 110 110 110 H 210 210 210 210 210 210 210 210 210 H1 250 250 250 250 250 300 300 300 350 L1 110 110 110 110 110 110 110 110 110 H 210 210 210 210 210 210 210 210 210 H1 350 350 400 400 400 450 450 500 600 PROTUKIŠN KP S ZŠTITOM OD VJETR nti-down draught terminal DEFLEKTOR Deflektor LPKZ 650 xxx-xxxx yyyy L1 110 110 110 110 110 110 110 110 110 L2 110 110 110 110 110 110 110 110 110 H 240 240 240 240 240 240 240 240 240 H1 220 220 220 220 250 250 300 300 350 L1 110 110 110 110 110 110 110 110 110 L2 110 110 110 110 110 110 110 110 125 H 240 240 240 240 240 240 240 240 240 H1 350 400 400 450 450 500 500 550 600 LDEFLEKTOR 659 xxx-xxxx yyyy D 80 100 125 150 200 250 300 350 400 D1 120 140 165 190 240 290 340 390 440 W 180 230 280 340 440 550 650 750 850 H 355 410 480 535 630 760 875 1040 1180 H1 70 70 80 80 90 100 120 140 160 H2 45 65 75 85 110 140 165 220 260 H3 80 95 125 150 190 240 280 320 360 H4 160 180 200 220 240 280 310 360 400 22
PROTUKIŠN KP S PERFORCIJOM Rain cap with perforation LPKP 660 xxx-xxxx yyyy L1 105 105 105 105 105 105 105 105 105 H 190 190 190 190 190 190 190 190 190 H1 250 250 250 250 250 300 300 300 350 L1 105 105 105 105 105 105 105 105 105 H 190 190 190 190 190 190 190 190 190 H1 350 350 400 400 400 450 450 500 600 SUPER KP Super cap LEKZV 725 xxx-xxxx yyyy D 80 100 130 150 180 200 250 300 350 L1 120 120 120 120 120 120 120 120 120 H 310 310 310 350 350 390 450 450 500 n 6 6 6 8 8 9 13 13 15 ROTIRJUĆ KP Rotating cap LRK 735 xxx-xxxx yyyy L1 140 140 140 140 140 140 140 140 140 H 280 290 300 310 320 330 340 350 360 H1 280 290 300 310 320 330 340 350 360 L1 140 140 140 140 140 140 140 140 140 H 380 400 420 430 450 480 500 550 600 H1 380 400 420 430 450 480 500 550 600 23
ZVRŠNI PERFORIRNI ELEMENT Final element with perforation LZPE 675 xxx-xxxx yyyy L1 190 190 190 190 190 190 190 190 190 L1 190 190 190 190 190 190 190 190 190 ROZET UKRSN Decoration rosette LROZET 680 xxx-xxxx yyyy L 13 13 13 13 13 13 13 13 13 ROZET UGRDN Rosette for building into wall LROZUGR 690 xxx-xxxx yyyy D 80 90 100 110 120 130 L 100 100 100 100 100 100 D 140 150 160 180 200 - L 100 100 100 100 100-24
PRIGUŠIVČ BUKE Muffler L (zzz) - dužina prigušivača L (zzz) - muffler lenght LPRIG80075 700 xxx-xxxx yyyy tp zzz D 80 90 100 110 120 130 140 150 L 50 50 50 50 50 50 50 50 L1 800 800 800 800 800 800 800 800 D1 230 250 250 250 280 280 300 300 D 160 180 200 220 230 250 280 300 L 50 50 50 50 50 50 50 50 L1 800 800 800 800 800 800 800 800 D1 300 350 350 350 400 400 450 450 LPRIG40075 710 xxx-xxxx yyyy tp zzz D 80 90 100 110 120 130 140 150 L 50 50 50 50 50 50 50 50 L1 400 400 400 400 400 400 400 400 D1 230 250 250 250 280 280 300 300 D 160 180 200 220 230 250 280 300 L 50 50 50 50 50 50 50 50 L1 400 400 400 400 400 400 400 400 D1 300 350 350 350 400 400 450 450 VRT - ML Small door LVRTM 730 xxx-xxxx ss Visina / Height - L Širina / Width - L1 175 115 PRODUŽETK Z VRT - ML Extension for small door LPRODML 740 xxx-xxxx Visina / Height - L Širina / Width - L1 Duljina / Length - H 175 115 125 25
VRT Z ZIDNI DIMNJK S IZOLCIJOM Door for stone chimney with isolation LVRZID 750 xxx-xxxx ss Visina / Height Širina / Width H 235 L 175 H1 282 L1 220 Visina / Height Širina / Width H 305 L 223 H1 352 L1 272 VRT - VELIK Large door LVRTV 760 xxx-xxxx ss Visina / Height - L Širina / Width - L1 285 190 PRODUŽETK Z VRT - VELIK Extension for large door LPRODML 770 xxx-xxxx ss Visina / Height - L Širina / Width - L1 Duljina / Length - H 285 190 125 26
PRIKLJUČN CIJEV H=250 mm S REGULIRJUĆOM KLPNOM Element with flue damper H=250 mm LMK 780 xxx-xxxx yyyy tp L1 200 200 200 200 200 200 200 200 283 L1 283 283 283 283 283 450 450 450 450 ŠIBER Slide rule LŠIBER 785 xxx-xxxx yyyy tp L1 200 200 200 200 200 200 200 200 200 L1 200 200 200 200 200 200 200 200 200 27
28