News 2001 S E R I E S CGL Wide Opening Parallel Gripper Series CGL Piston diameter 10, 16, 20, 25 and 32 mm, magnetic The wide opening parallel gripper mod. CGL is available in 5 different sizes and has a compact design with a high gripping force and exists in five diameters with three different strokes. The high gripping force is optained by means of a double piston mechanism and the fingers are synchronized by a rack and pinion mechanism. Due to the relatively long stroke of the fingers, the gripper mod. CGL is suitable to handle workpieces with different sizes. This gripper mod. CGL is equipped with rod wipers to protect against dust. The compact and versatile design offers great freedom of mounting. The pistons are equipped with permanent magnets for the use of magnetic proximity switches mod CSC. The proximity switches can be inserted in the C -shaped grooves on the body in order to detect whether the gripper is in an open or closed position. High gripping force Suitable to handle pieces with different sizes Versatile design GENERAL DATA Model CGL-10 CGL-16 CGL-20 CGL-25 CGL-32 Bore sizes (mm) 10 16 20 25 32 Stroke 20 30 40 50 70 40* 60* 80* 100* 120* 60* 80* 100* 120* 160* Type of operation double acting, parallel, rack and pinion type Fluid filtered compressed air Operating pressure (bar) P.min 1,5 bar - P.max 7 bar Operating temperature 0-60 C Max. operating frequency 40 cycles/min Lubrification with or without lubrification Effective gripping force N (1) 14 44 73 128 224 Length of max. gripping point L 40mm 60mm 80mm 90mm 100mm Weight see diagrams Repeatability +/- 0,1mm Port sizes M5 M5 M5 M5 G1/8 Magnet magnet for proximity sensors in piston (1) L: Length of gripping point =30mm, Pressure P =5 bar * Strokes available on special request 020
CGL S E R I E S News 2001 CODING OF PARALLEL SERIES CGL CGL 20 040 SERIES CGL Material specifications BORES 10 = ø 10 mm 16 = ø 16 mm 20 = ø 20 mm 25 = ø 25 mm 32 = ø 32 mm No. Item Material No. Item Material 01 Body Aluminium 02 Piston rod Stainless steels AISI 303 03 Front end cove Aluminiun 04 Piston Brass 05 Magnet cover Brass 06 Finger Aluminium 07 Pinion Carbon steel 08 Pinion cover Iron 09 Rack Stainless steel 10 Rod seal NBR 11 Rod seal NBR 12 Rod seal cover Iron 13 Washer Iron 14 Shock bumper Polyurethane 15 Front cover o-ring NBR 16 Piston o-ring NBR 17 Piston seal NBR 18 Seeger Spring steel 19 Seeger Spring steel 20 Seeger Spring steel 21 C-ring Spring steel 22 Nut Bearing steel 23 Magnet Plastic magnet STROKE 021
News 2001 S E R I E S CGL CGL - 20 External dimensions CGL-1020 52 36 30 30 100 (80) 76 56 300 CGL-1040 68 52 46 46 136 (96) 112 72 360 CGL-1060 86 70 64 64 174 (114) 150 90 440 CGL - 16 External dimensions CGL-1630 60 45 26 26 128 (98) 98 68 560 CGL-1660 90 75 56 56 188 (128) 158 98 780 CGL-1680 110 95 76 76 228 (148) 198 118 1100 022
CGL S E R I E S News 2001 CGL - 20 External dimensions CGL-2040 71 58 40 40 157 (117) 119 79 1000 CGL-2080 113 100 82 82 239 (159) 201 121 1400 CGL-20100 133 120 102 102 279 (179) 241 141 1660 CGL - 25 External dimensions CGL-2550 88 70 50 50 192 (142) 146 96 1720 CGL-25100 142 124 104 104 296 (196) 250 150 2480 CGL-25120 160 142 122 122 334 (214) 288 168 3480 023
News 2001 S E R I E S CGL CGL - 32 External dimensions CGL-3270 110 86 69 69 240 (170) 188 118 2940 CGL-32120 158 134 117 117 338 (218) 286 166 4120 CGL-32160 202 178 161 161 422 (262) 370 210 5770 Mounting type Mounting of sensor Mod. CSC - 220 Bore size Setting range F Response differential R 10 5 1.1(mm) 16 5 1.1(mm) 20 8.5 1(mm) 25 10 1.8 (mm) 32 10 2 (mm) 024