INDIRECT DIRECT ASY 3 1/8 80mm 2 15/16 75mm L3ID-SUS-SYS Article # Distribution Diffuser Length Angle Voltage Linear Spot x Qty Electrical Power Suspension Finishes Lighting Couplers Feed Cable Controls Product Distribution Diffuser Length Angle Couplers Voltage Inserts L3ID-SUS-SYS DR -Direct OP - Opal State desired (If required) 120V Linear Spot (x Specify quantity) Idaho DI - Indirect/Direct (T5) MP - Micro length SA - 90 Coupler 277V LED Spot 1 (20 / 40 / 60 ) Suspension ASY - Asymmetric Prism (LED) CA - Angle (45-180 ) L306-3000K S11-1 x 9.3W 2700K LED 347V L307-4000K S12-1 x 9.3W 3000K LED (Specify required angle) (Optional) S13-1 x 9.3W 4000K LED L356-3500K (Upon request) Spot 2 (20 / 40 / 60 ) S21-2 x 9.3W 2700K LED Fluorescent S22-2 x 9.3W 3000K LED S1-1 x T5 SO S23-2 x 9.3W 4000K LED H1-1 x T5 HO Spot Halogen P11-1 x 50W PAR16 P21-2 x 50W PAR16 Electrical Options Power Feed Suspension Cable Finishes (see page 7) Wired Lighting Control LED Fluorescent 1 Circuit Standard Cable (Pair) Please specifyprofile / end cap / suspension cable. DOS - Daylight & Occupancy DP - Phase dimming Non-Dimming 1C3-3Wire 2M - 2000mm 00 Natural Anodized Alum 13 Mysterious Gray Sensor DV - 0-10V dimming SO - Standard Output 1C4-4Wire 6M - 6000mm 01 Sparkling Silver 14 Twilight DL - Lutron Hi-Lume HO - High Output 1C5-5Wire 02 Black Velvet 15 Lost Dream A Series (3 Wire) Y- Cable 03 Crystal White 16 Purple Sky Dimming 2MY - 2000mm 04 Creamy 17 Fresh Oh EM -Emergency DIM1-0-10V dimming 6MY - 6000mm 05 Hampton Bay 18 Funky P. (Supplied by others) DIME - Lutron Eco System(10%) 06 Lagoon 19 Kissing Aphrodite DIME3 -LutronEcoSystem3Wire(10%) 07 Urban Forest 20 Poseidon's Paradise Other: please specify DIM3D - Lutron Hi-Lume 3D (1%) 08 In the Army 21 Blue Sky DIM3D3 -LutronHi-Lume 3Wire(1%) 09 Rusty Angel 22 Spring Green DIMEH - Lutron Eco System H series (1%) 10 Rusty Rush 23 Mellow Yellow EM -Emergency 11 Milk & Chocolate 24 Golden Heart Other: please specify 12 Fade to Gray 25 Gun Metal For unique customized profiles please include a layout drawing or description below; Profile Layout Suggestions * Include detailed information such as distance between linear lamps, spots and aluminum caps. ** Zaneen will supply submittal drawing for approval once a Purchase Order is received. x / / Available for International specifications by adding 'INT' at the end of the existing Model #. International spec sheets are available upon request. For assistance to write your custom specification, email your inquiry to: specification@zaneen.com. You will receive a response within 1-2 business days. Page 1 of 10
Type Surface (Non-IC Type) Ceiling or Wall (uplight or downlight) mounted Rated for Dry or Damp locations (IP20) Approval Certified by C.S.A. for North American Standards Emission Direct or Asymmetric. Aluminum caps offered to customize the location of the spot light. Efficiency Acrylic diffuser (snap-in) lens 43% Micro prismatic (snap-in) lens 53% PROFILE INSERTS Linear LED LED 3000K (6.2W/ 880 lm/ft) LED 4000K (6.2W/ 902 lm/ft) LED 3500K (Upon request) (LM 79-80) LED inserts are offered in lengths stated in page 4. Zaneen will finalize the actual profile length after calculating the inserts required. * Please contact Zaneen for other color temperature options. Measurements w. 75mm x ht. 80mm (2 15/16" x ht. 3 1/8") Housing Anodized extruded aluminum profile up to 9-10 2/16 long. Profiles are joined with a coupler to ensure uniform appearance and easy installation. Extruded aluminum offers high reflective surface and excellent heat dissipation. Corners 100% homogeneous appearance. 90 degree and custom angles (45-180 degree) are available. Corners are created with mitered cut in lens and aluminum. End Cap has no visible screws. Finishes Standard; Natural anodized aluminum Optional; 24 colors offered using premium powder coated finish. Profile and end caps can be specified in different finishes. Wall Bracket If required, aluminum wall brackets are located approximately every 4ft-5ft. Fasteners and wall anchors are supplied by others. Mounting Holes Keyholes are drilled at the factory. Mounting hardware are supplied and installed by others. When using wall fastening spacer or key hole milling, fixture must be specified as up light or down light. Fluorescent Available Configurations 1 lamp flush T5 SO: 14W, 21W, 28W, 35W / T5 HO: 24W, 39W, 54W 1 lamp overlap T5 SO: 21W, 28W, 35W / T5 HO: 39W, 54W Emergency 1 lamp flush T5 SO: 21W, 28W, 35W / T5 HO: 39W, 54W 1 lamp overlap T5 SO: 21W, 28W, 35W / T5 HO: 39W, 54W Spot LED 1 x 9.3W LED Spot 2 x 9.3W LED Spot (2700K, 860lm / 3000K, 890lm / 4000K, 950lm) (2700K, 1720lm/ 3000K, 1780lm/ 4000K, 1900lm) Offered in 3 reflector choices (20, 40 and 60 ) also 25 color options for lamp ring. Minimum spacing between the LED spots is 300mm (11 13/16 ) for Spot 1 and 400mm (15 3/4") with Spot 2 both with integral power supplies. Halogen 1 x PAR16 and 2 x PAR16 low voltage halogen, GU10 base Minimum spacing of spots 170mm (6 11/16") and 240mm (9 7/16") respectively. Lamp Combination For specific lamp combinations or configurations, please specify the overall length and attach a sketch or drawing of the intended configuration. Zaneen will supply submittal drawings for approval once a Purchase Order is received. Page 2 of 10
ELECTRICAL LIGHTING CONTROL Luminaires are pre-wired with a factory installed branch circuit wiring and quick-release connectors. Through wiring is used to connect the luminaires. BX Cable is connected directly into the fixture. Junction cover plate is available upon request. Power Feed 22mm diameter hole located 2 inches from one end of the fixture, on top of the profile. If a different location is required, please specify. LED Driver Remote driver must be installed into a metal enclosure (supplied by others). Maximum distance between the power supply and the last fixture on the circuit is 30' using a 18-gauge wire. For more than 30', the gauge of the wire must be determined by a certified professional. The length of the fixture specified must be considered within the maximum distance of 30'. Provisions must be made on site for accessibility to the power supplies. *Electronic Class II driver, 120V/ 277V/ 347V(optional). Dimming driver 0-10V (10-100%), Lutron Hi-Lume A type dimming Emergency Inverter Compatible To be installed remotely but provided by others, can be located up to 250 away from the fixture. Emergency Circuit Wiring Upon request. Fluorescent Ballast Electronic high-power factor ballast. Specify 120V, 277V, 347V. Ballast is pre-wired with leads to one end of fixture. Ballast is positioned behind the lamp insert and is fully accessible from below. 0-10V, Lutron 3-wire or Lutron digital dimming options are available. *Lutron dimming ballast is used as standard 120V/ 277V/ 347V. Emergency Ballast To be installed remotely. Only 1 emergency ballast for every 4 (flush) and/or 5 (flush or overlap) insert can be integral. Emergency Circuit Wiring Upon request. Emergency Testing Switch is installed on the side of the emergency ballast equipped fixture. Fixture integrated occupancy and daylight harvesting sensors mounted directly into the lighting fixture. ZANEEN offers a wired version of these lighting controls which will work independently and are able to control a limited number of lamps (LED or fluorescent). This utilizes passive infrared (PIR) technology with Auto ON/Auto OFF operation and an adjustable Time Delay. The Sensor Head measures the room illumination and when activated will turn the lights OFF for increased energy savings. Operating temperature range: 0 C - 55 C (32F 131F) Maximum Load Rating: - Fluorescent Ballasts 800VA at 120Vac - Fluorescent Ballasts 1200VA at 277Vac - LED 650W at 120Vac Time Delay: 30 sec to 30 min. Photo Cell range: 0 to 120 footcandles Sensor Head: Length 50.62 mm (2 ) x Width 24.41 mm (15/16 ) x Height 21.26 mm (13/16 ) Power Pack: Length 190 mm (7 ½ ) x Width 25 mm (1 ) x Height = 26 mm (1 ) WARRANTY Zaneen provides a limited warranty from date of purchase to original purchaser. LED Inserts : 5 year Rated for 50,000 hours at 70% lumen output (L70) LED Driver : 5 year Fluorescent / Ballast : 5 year Dimming Ballast : 3 year 12V Transformer : 1 year Non-Electrical Components : 1 year Page 3 of 10
INSERTS AR INSERTS LED Code Color Temp. (K) Wattage Voltage Lumen CRI Length Dimensions L38163-_ L38164-_ 3000K 4000K 37W 37W 5680lm 6000lm 2270mm (7'-5 3/8") 2270mm (7'-5 3/8") L38161-_ L38162-_ 3000K 4000K 33W 33W 4970lm 5250lm 1980mm (6'-5 15/16") 1980mm (6'-5 15/16") L38159-_ L38160-_ 3000K 4000K 28W 28W 120Vac* 4260lm 4500lm 1700mm (5'-6 15/16") 1700mm (5'-6 15/16") Length L38157-_ L38158-_ 3000K 4000K 23W 23W 3550lm 3750lm 1420mm (4'-7 7/8") 1420mm (4'-7 7/8") L38155-_ L38156-_ 3000K 4000K 19W 19W 2840lm 3000lm 1140mm (3'-8 7/8") 1140mm (3'-8 7/8") *LED driver included To complete the above codes add suffix according to the example Phase 0-10V ORDER-EXAMPLE: DIMMING DP DV L38207- DV Refer to page 5 for finishes 0-10V Fluorescent Overlap Lamp Insert Position S1 H1 Standard Output T5: 21W, 28W, 35W High Output T5: 39W, 54W 1-Lamp ----- Emergency Standard Output T5: 21W, 28W, 35W High Output T5: 39W, 54W Asymmetric: Standard Output T5: 28W, 35W High Output T5: 54W 1-Lamp ----- SPOT INSERTS Refer to page 7 Spot 1 Code Color Temp. (K) Wattage Voltage Lumen CRI Features 01-25 Reflector Opt. Dimensions L38207- _ L38208- _ L38209- _ 2700 K 3000 K 4000 K 1 x 9.3W 1 x 9.3W 1 x 9.3W * 120Vac 860lm 890lm 950lm *LED driver included To complete the above codes add suffix according to the example REFLECTOR DIMMING Refer to page 7...20 20...40 40...60 60 ORDER-EXAMPLE: L38207- DV-02-60 Phase 0-10V DP DV Refer to page 7 for finishes 0-10V black 60 Spot 2 Code Color Temp. (K) Wattage Voltage Lumen CRI Features 01-25 Reflector Opt. Dimensions L38210- _ L38211- _ L38212- _ 2700 K 3000 K 4000 K 2 x 9.3W 2 x 9.3W 2 x 9.3W * 120Vac 1720lm 1780lm 1900lm *LED driver included To complete the above codes add suffix according to the example...20...40...60 ORDER-EXAMPLE: REFLECTOR 20 40 60 L38210- DV-02-60 Phase 0-10V DIMMING DP DV Refer to page 7 for finishes 0-10V black 60 Page 4 of 10
SPOT HALOGEN Lamp Base Wattage Voltage Dimensions PAR16 GU 10 1 x 50W 120Vac* Will depend on the supplied lamp *Transformer included PAR16 GU 10 2 x 50W 120Vac* Will depend on the supplied lamp *Transformer included ELECTRICAL OPTIONS LED DRIVERS Dimmable Max. Wattage Voltage Dimensions (mm/inch) DV DP 0-10V dimming Phase dimming 100W 100W 120-277V / 24Vdc 347V (*Optional) L.318x W.102x H.50.8mm /L.12 1/2 x W.4 x H.2 DL Lutron Hi-Lume A Series 40W 120-277V / 24Vdc L.318x W.102x H.50.8mm /L.12 1/2 x W.4 x H.2 FLUORESCENT BALLASTS Non-Dimm/Dimmable T5SO /Wattages T5HO /Wattages Voltage Dimensions (mm/inch) S H Standard Output non-dimm High Output non-dimm 14-21-28-35W --- --- 120V-277V 347V (*Optional) INTEGRAL DIM1 DIME DIME3 DIM3D DIM3D3 DIMEH 0-10V dimming Lutron Eco System(10%) Lutron Eco System 3 wire (10%) Lutron Hi-Lume 3D (1%) Lutron Hi-Lume 3 wire (1%) Lutron Eco System H series (1%) 14-21-28W 14-21-28-35W 14-21-28-35W 14-21-28W 14-21-28W 14-21-28W 54W 120V-277V 347V (*Optional) INTEGRAL EM Emergency 90 minutes operation 21-28-35W 39-54W 120V-277V L.571.5x W.30x H.30mm /L.22 1/4 x W.1 3/16 x H.1 3/16 WIRED LIGHTING CONTROL Wired LC Code Sensor Head Operating Temprature Max. Load Rate Time Delay Photo Cell Range DOS Fixture Mounted PIR Sensor Head 0 C - 55 C (32F - 131F) Fluorescent Ballast 800VA at 120Vac Fluorescent Ballast 1200VA at 277Vac LED 650W at 120Vac 30 sec to 30 min. 0-120 footcandles (13/16") 21.3mm Dimensions 50.6mm (2") 190x25x26mm / 7 ½ x 1 x 1 Power Pack 24.4mm (15/16") Page 6 of 10
COMPONENTS Refer to page 7 c 00-25 Refer to page 7 c 00-25 Aluminum Profile *max. 3000mm lengths Coupler Opal Diffuser *max. 3000mm lengths Corner Coupler - 90 Microprismatic Diffusor Corner Required Angle - 45-180 Aluminum Cap Profile *max. 3000mm lengths Suspension Cable (pair) 2000mm 6000mm End Cap Flat *7.5mm (5/16 ) Y-Suspension Cable (pair) 2000mm 6000mm 7.5 Power Feed 2000mm - 3 wire 2000mm - 4 wire 2000mm - 5 wire 6000mm - 3 wire 6000mm - 4 wire 6000mm - 5 wire Page 6 of 10
Color Choices: 00 01 02 03 04 05 06 natural anodized aluminum sparkling silver RAL9006FS black velvet RAL9005FS crystal white RAL 9016FS creamy hampton bay lagoon 07 08 09 10 11 12 13 urban forest in the army rusty angel rusty rush milk & chocolate fade to gray mysterious gray 14 15 16 17 18 19 20 twilight lost dream purple sky fresh Oh funky P. kissing aphrodite poseidon s paradise 21 22 23 24 25 blue sky spring green mellow yellow golden heart gun metal 00 Standard Finish: natural anodized aluminum 01-25 Color Finishes: additional charge ADDITIONAL NOTES Page 7 of 10
WIRING DIAGRAMS FOR AR LED 0-10V DIMMING RED/WHITE 0-10V DRIVER 0-10Vdc 24Vdc + _ GRAY PURPLE BLUE *DIMMER RED *Zaneen recommends Diva 0-10V (DVTV) dimmer. * This diagram applies only to Diva 0-10V (DVTV) dimmer. + _ LED LIGHT ENGINE LUTRON ECO SYSTEM DIGITAL DIMMING GROUND BLACK WHITE GREEN HI-LUME A SERIES + RED _ BLACK LED LIGHT ENGINE GROUND E1 - PURPLE 1 LUTRON ECOSYSTEM BUS E2 - PURPLE 2 LUTRON 3-WIRE DIMMER CONTROL BLACK GREEN 3-WIRE CONNECTION DIMMER WHITE RED YELLOW OR ORANGE BLACK ORANGE WHITE DIMMING DRIVER + _ LED LIGHT ENGINE Page 8 of 10
WIRING DIAGRAMS FOR FLUORESCENT T5 SO AND HO 0-10V DIMMING RED/WHITE 0-10V BALLAST 0-10Vdc 24Vdc + _ GRAY PURPLE BLUE *DIMMER RED *Zaneen recommends Diva 0-10V (DVTV) dimmer. * This diagram applies only to Diva 0-10V (DVTV) dimmer. FLUORESCENT FIXTURE LUTRON ECO SYSTEM DIGITAL DIMMING BALLAST E1 - PURPLE 1 E2 - PURPLE 2 LUTRON ECOSYSTEM BUS FLUORESCENT FIXTURE LUTRON 3-WIRE DIMMER CONTROL BLACK GREEN 3-WIRE CONNECTION DIMMER RED WHITE YELLOW OR ORANGE BLACK ORANGE WHITE DIMMING BALLAST FLUORESCENT FIXTURE Page 9 of 10
WIRING DIAGRAMS FOR LIGHTING CONTROL WIRED LIGHTING CONTROL Hot (Black) OSF10-PPW Red Line 120/277VAC 60Hz White Load Neutral (White) Integral to Fixture Page 10 of 10