Idaho Profile System - Trimless
|
|
- Buck Copeland
- 5 years ago
- Views:
Transcription
1 3 4/16 82mm DIRECT 3 9/16 90mm 3 6/16 85mm L3ID-TRI-SYS DR OP Article # Distribution Diffuser Length Voltage Linear Electrical Mounting Brackets Lighting Control Product Distribution Diffuser Length Voltage Inserts Electrical Options L3ID-TRI-SYS DR -Direct OP -Opal State desired length 120V Linear LED Fluorescent Idaho Trimless 277V LED DP - Phase Dimming Non-Dimming L306 - DV V Dimming SO - Standard Output 347V L406 - DL - Lutron Hi-Lume A series HO - High Output (Optional) L K (Upon request) Dimming EM - Emergency (Supplied by others) DIM1-0-10V Fluorescent Other: Please specify DIME - Lutron Eco System(10%) S1 -T5SO1lamp DIME3 - Lutron Eco System 3 Wire (10%) H1 -T5HO1lamp DIM3D - Lutron Hi-Lume 3D (1%) DIM3D3 -LutronHi-Lume3Wire(1%) DIMEH - Lutron Eco System H series (1%) EM - Emergency Other: Please Specify Mounting Brackets Ceiling Thickness (Drywall) 10-10mm (3/8") mm (1/2") 15-15mm (5/8") Wired Lighting Control DOS - Daylight & Occupancy Sensor For unique customized profiles please include a layout drawing or description below; * Include detailed information such as distance between linear lamps, spots and aluminum caps. ** Zaneen will supply submittal drawing for approval once a Purchase Order is received. Profile Layout Suggestions Available for International specifications by adding 'INT' at the end of the existing Model #. International spec sheets are available upon request. For assistance to write your custom specification, your inquiry to: specification@zaneen.com. You will receive a response within 1-2 business days. Page 1 of 8
2 Type Surface (Non-IC Type) Ceiling or Wall (uplight or downlight) mounted Rated for Dry or Damp locations (IP20) Approval Certified by C.S.A. for North American Standards Emission Direct or Asymmetric. Aluminum caps offered to customize the location of the spot light. Efficiency Acrylic diffuser (snap-in) lens 43% Micro prismatic (snap-in) lens 53% PROFILE INSERTS Linear LED LED LED LED 3500K (Upon request) (LM 79-80) LED inserts are offered in lengths stated in page 4. Zaneen will finalize the actual profile length after calculating the inserts required. * Please contact Zaneen for other color temperature options. Measurements w. 82mm x ht. 90mm (3 1/4" x ht. 3 9/16") Housing Anodized extruded aluminum profile up to 8-0 long. Profiles are joined with a coupler to ensure uniform appearance and easy installation. Extruded aluminum offers high reflective surface and excellent heat dissipation. Corners 100% homogeneous appearance. 90 degree and custom angles ( degree) are available. Corners are created with mitered cut in lens and aluminum. End Cap has no visible screws. Finishes Standard; Natural anodized aluminum Optional; 24 colors offered using premium powder coated finish. Profile and end caps can be specified in different finishes. Wall Bracket If required, aluminum wall brackets are located approximately every 4ft-5ft. Fasteners and wall anchors are supplied by others. Fluorescent Available Configurations 1 lamp overlap T5 SO: 21W, 28W, 35W T5 HO: 39W, 54W 2 lamp overlap T5 SO: 28W T5 HO: 54W Emergency T5 SO: 21W, 28W, 35W T5 HO: 39W, 54W Lamp Combination For specific lamp combinations or configurations, please specify the overall length and attach a sketch or drawing of the intended configuration. Zaneen will supply submittal drawings for approval once a Purchase Order is received. Mounting Holes Keyholes are drilled at the factory. Mounting hardware are supplied and installed by others. When using wall fastening spacer or key hole milling, fixture must be specified as up light or down light. Page 2 of 8
3 ELECTRICAL LIGHTING CONTROL Luminaires are pre-wired with a factory installed branch circuit wiring and quick-release connectors. Through wiring is used to connect the luminaires. BX Cable is connected directly into the fixture. Junction cover plate is available upon request. Power Feed 22mm diameter hole located 2 inches from one end of the fixture, on top of the profile. If a different location is required, please specify. LED Driver Remote driver must be installed into a metal enclosure (supplied by others). Maximum distance between the power supply and the last fixture on the circuit is 30' using a 18-gauge wire. For more than 30', the gauge of the wire must be determined by a certified professional. The length of the fixture specified must be considered within the maximum distance of 30'. Provisions must be made on site for accessibility to the power supplies. *Electronic Class II driver, 120V/ 277V/ 347V(optional). Dimming driver 0-10V (10-100%), Lutron Hi-Lume A type dimming Emergency Inverter Compatible To be installed remotely but provided by others, can be located up to 250 away from the fixture. Emergency Circuit Wiring Upon request. Fluorescent Ballast Electronic high-power factor ballast. Specify 120V, 277V, 347V. Ballast is pre-wired with leads to one end of fixture. Ballast is positioned behind the lamp insert and is fully accessible from below. 0-10V, Lutron 3-wire or Lutron digital dimming options are available. *Lutron dimming ballast is used as standard 120V/ 277V/ 347V. Emergency Ballast To be installed remotely. Only 1 emergency ballast for every 4 (flush) and/or 5 (flush or overlap) insert can be integral. Emergency Circuit Wiring Upon request. Emergency Testing Switch is installed on the side of the emergency ballast equipped fixture. Fixture integrated occupancy and daylight harvesting sensors mounted directly into the lighting fixture. ZANEEN offers a wired version of these lighting controls which will work independently and are able to control a limited number of lamps (LED or fluorescent). This utilizes passive infrared (PIR) technology with Auto ON/Auto OFF operation and an adjustable Time Delay. The Sensor Head measures the room illumination and when activated will turn the lights OFF for increased energy savings. Operating temperature range: 0 C - 55 C (32F 131F) Maximum Load Rating: - Fluorescent Ballasts 800VA at 120Vac - Fluorescent Ballasts 1200VA at 277Vac - LED 650W at 120Vac Time Delay: 30 sec to 30 min. Photo Cell range: 0 to 120 footcandles Sensor Head: Length = mm (2 ), Width = mm (15/16 ), Height = mm (13/16 ) Power Pack: Length = 190 mm (7 1/2 ), Width = 25 mm (1 ), Height = 26 mm (1 ) WARRANTY Zaneen provides a limited warranty from date of purchase to original purchaser. LED Inserts : 5 year Rated for 50,000 hours at 70% lumen output (L70) LED Driver : 5 year Fluorescent / Ballast : 5 year Dimming Ballast : 3 year 12V Transformer : 1 year Non-Electrical Components : 1 year Page 3 of 8
4 INSERTS AR INSERTS LED Code Color Temp. (K) Wattage Voltage Lumen CRI Length Dimensions L38163-_ L38164-_ 37W 37W 5680lm 6000lm 2270mm (7'-5 3/8") 2270mm (7'-5 3/8") L38161-_ L38162-_ 33W 33W 4970lm 5250lm 1980mm (6'-5 15/16") 1980mm (6'-5 15/16") L38159-_ L38160-_ L38157-_ L38158-_ 28W 28W 23W 23W 120Vac* 4260lm 4500lm 3550lm 3750lm 1700mm (5'-6 15/16") 1700mm (5'-6 15/16") 1420mm (4'-7 7/8") 1420mm (4'-7 7/8") Length L38155-_ L38156-_ 19W 19W 2840lm 3000lm 1140mm (3'-8 7/8") 1140mm (3'-8 7/8") *LED driver included To complete the above codes add suffix according to the example Phase 0-10V ORDER-EXAMPLE: DIMMING DP DV L DV Refer to page 5 for finishes 0-10V Fluorescent Overlap Flush Lamp Insert Position S1 H1 Standard Output T5: 21W, 28W, 35W High Output T5: 39W, 54W 1-Lamp 1-Lamp 2-Lamp (28W/54W) Emergency Standard Output T5: 21W, 28W, 35W High Output T5: 39W, 54W WIRED LIGHTING CONTROL Wired LC Code Sensor Head Operating Temprature Max. Load Rate Time Delay Photo Cell Range DOS Fixture Mounted PIR Sensor Head 0 C - 55 C (32F - 131F) Fluorescent Ballast 800VA at 120Vac Fluorescent Ballast 1200VA at 277Vac LED 650W at 120Vac 30 sec to 30 min footcandles (13/16") 21.3mm Dimensions 50.6mm (2") 190x25x26mm / 7 ½ x 1 x 1 Power Pack 24.4mm (15/16") Page 4 of 8
5 35 Idaho Profile System - Trimless ELECTRICAL OPTIONS LED DRIVERS* Dimmable Max. Wattage Voltage Dimensions (mm/inch) DP DV Phase dimming 0-10V dimming 100W 100W V / 24Vdc 347V (*Optional) L.318x W.102x H.50.8mm /L.12 1/2 x W.4 x H.2 DL Lutron Hi-Lume A Series 40W V / 24Vdc L.318x W.102x H.50.8mm /L.12 1/2 x W.4 x H.2 FLUORESCENT BALLASTS Non-Dimm/Dimmable T5SO /Wattages T5HO /Wattages Voltage Dimensions (mm/inch) SO HO Standard Output non-dimm High Output non-dimm W W 120V-277V 347V (*Optional) INTEGRAL DIM1 DIME DIME3 DIM3D DIM3D3 DIMEH 0-10V dimming Lutron Eco System(10%) Lutron Eco System 3 wire (10%) Lutron Hi-Lume 3D (1%) Lutron Hi-Lume 3 wire (1%) Lutron Eco System H series (1%) 21-28W 54W W 39-54W W 39-54W 21-28W 39-54W 21-28W 39-54W 21-28W 39-54W 120V-277V 347V (*Optional) INTEGRAL EM Emergency 90 minutes operation W 39-54W 120V-277V L.571.5x W.30x H.30mm /L.22 1/4 x W.1 3/16 x H.1 3/16 COMPONENTS 6 12/16 172mm Profile *Max. 8'-0" (2438mm) lengths Mounting Bracket *10mm/ 12.5mm/ 15mm 4 3/16 107mm Diffuser *Max. 8'-0" (2438mm) length Linear Coupler 80 End Cap Page 5 of 8
6 WIRING DIAGRAMS FOR AR LED 0-10V DIMMING RED/ 0-10V DRIVER 0-10Vdc 24Vdc + _ GRAY PURPLE BLUE *DIMMER RED *Zaneen recommends Diva 0-10V (DVTV) dimmer. * This diagram applies only to Diva 0-10V (DVTV) dimmer. + _ LED LIGHT ENGINE LUTRON ECO SYSTEM DIGITAL DIMMING GROUND GREEN HI-LUME A SERIES + RED _ LED LIGHT ENGINE GROUND E1 - PURPLE 1 LUTRON ECOSYSTEM BUS E2 - PURPLE 2 LUTRON 3-WIRE DIMMER CONTROL GREEN 3-WIRE CONNECTION DIMMER RED YELLOW OR ORANGE ORANGE DIMMING DRIVER + _ LED LIGHT ENGINE Page 6 of 8
7 WIRING DIAGRAMS FOR FLUORESCENT T5 SO AND HO 0-10V DIMMING RED/ 0-10V BALLAST 0-10Vdc 24Vdc + _ GRAY PURPLE BLUE *DIMMER RED *Zaneen recommends Diva 0-10V (DVTV) dimmer. * This diagram applies only to Diva 0-10V (DVTV) dimmer. FLUORESCENT FIXTURE LUTRON ECO SYSTEM DIGITAL DIMMING BALLAST E1 - PURPLE 1 E2 - PURPLE 2 LUTRON ECOSYSTEM BUS FLUORESCENT FIXTURE LUTRON 3-WIRE DIMMER CONTROL GREEN 3-WIRE CONNECTION DIMMER RED YELLOW OR ORANGE ORANGE DIMMING BALLAST FLUORESCENT FIXTURE Page 7 of 8
8 WIRING DIAGRAMS FOR LIGHTING CONTROL WIRED LIGHTING CONTROL Hot (Black) OSF10-PPW Red Line 120/277VAC 60Hz White Load Neutral (White) Integral to Fixture Page 8 of 8
Idaho Profile System - Surface
Direct Asymmetric L3ID-SUR-SYS Article # Mounting Distribution Diffuser Length Angle Voltage Linear Spot x Qty Electrical Finishes Accessories Lighting Type Couplers Control Product Mounting Distribution
Idaho Profile System - Suspension
INDIRECT DIRECT ASY 3 1/8 80mm 2 15/16 75mm L3ID-SUS-SYS Article # Distribution Diffuser Length Angle Voltage Linear Spot x Qty Electrical Power Suspension Finishes Lighting Couplers Feed Cable Controls
Vision Profile System - Surface
4 1/8 105mm DIRECT 1 15/16 49mm L3VI-SUR-SYS DR OP X Article # Mounting Distribution Diffuser Length Angle Voltage Linear Spot x Qty Electrical Finishes Accessories Type Couplers / Lighting Control Product
Utah Profile System - Recessed
1 13/16 46mm DIRECT 2 11/16 68mm 2 5/16 58mm L3UT-REC-SYS DR OP x Article # Distribution Diffuser Length Angle Voltage Linear Spot x Qty Electrical Finishes Accessories Couplers Lighting Control Product
HxO Profile System - Suspension
INDIRECT 1 14/16 47mm DIRECT L3HX-SUS-SYS DI OP X / / Article # Installation Distribution Diffuser Length Angle Couplers Voltage Linear Spot x Qty Electrical Power Feed Suspension Cable Finishes Lighting
Maxline Profile System - Surface
DIRECT 5 14/16 150mm 6 4/16 158mm L3ML-SUR-SYS DR / Article # Mounting Type Distribution Diffuser Length Angle Voltage Linear Spot Electrical Finishes Accessories Couplers Product Mounting Type Distribution
Maxline Profile System - Suspension
DIRECT 5 7/8 150mm 6 1/4 158mm L3ML-SUS-SYS DR Article # Distribution Diffuser Length Angle Voltage Linear Spot Electrical Power Suspension Finishes Couplers Feed Cable x / / Accessories Product Distribution
WALL MOUNT - DIRECT/INDIRECT
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K 4 5 /32 5 1 /2 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY UPLIGHT DOWNLIGHT 4 lm/ft 4 lm/ft 6.7 W/ft 124 lm/w 4 lm/ft 5 lm/ft 7.6 W/ft 123 lm/w 4 lm/ft
RECESSED LYTESPOT RCS RECESSED. STANDARD SIZES 1, 2, and 3 downlight models Trim and Trimless options
LYTESPOT RCS STANDARD SIZES 1, 2, and 3 downlight models Trim and Trimless options LAMPING LED - 3000K/3500K/4000K Downlight Output: 800-4000 lumen options (80-90+ CRI) Dimming down to 0% FINISH Aluminum,
SURFACE ASYMMETRIC MOUNT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 3500K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 400 lm/ft 3.7 W/ft 109 lm/w * Based on a 4 foot luminaire using one driver Please consult factory for
RECESSED ASYMMETRIC MOUNT. Project. Type. Notes TECHZONE TM AND LOGIX TM COMPATIBLE
Project Type Notes 5 1/32" PERFORMANCE PER LINEAR FOOT AT 4000K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 750 lm/ft 7.5 W/ft 97 lm/w * Based on a 4 foot luminaire using one driver Please consult factory
SURFACE MOUNT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K 3 5 /8 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 111 lm/w 5 lm/ft 4.7 W/ft 16 lm/w 75 lm/ft 7.5 W/ft 1 lm/w 1 lm/ft 1.4 W/ft 96 lm/w
Super-G Slim Module System - Suspension
Super-G Sim Modue System - Suspension ate: Project: mm (3 9/16") IRECT 2 9/16" 65mm L3SGS-SUS-SYS CE R OP Artice # Mounting istribution iffuser Intake profie LE Votage Eectrica Finishes Type / Product
RECESSED T-Bar & Drywall. Project. Type. Notes 47 15/16" 47 7/8" 48" between T-Bar SIDE VIEW
Project Type Notes PERFORMANCE AT 4000K 47 15/16" NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 2400 lm 22.76 W 103 lm/w 4000 lm 41.17 W 97 lm/w 5000 lm 53.46 W 94 lm/w 6500 lm 70.65 W 92 lm/w 7700 lm 85.33
Project. Type. Notes. C custom UNV universal BI bi-level dimming +NL(#) night light circuit (7) O other (6) +GTD(#) generator transfer device (7)
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K 5 1 /2 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.3 W/ft 122 lm/w 5 lm/ft 4.3 W/ft 117 lm/w 75 lm/ft 6.8 W/ft 19 lm/w 1 lm/ft 9.5 W/ft 15
RECESSED T-Bar & Drywall. Project. Type. Notes AULED 14 SO
Project Type Notes SECTION VIEW 3 1 PERFORMANCE AT 3500K NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY 2400 lm 19.1 W 126 lm/w 4000 lm 31.5 W 127 lm/w 5000 lm 40 W 125 lm/w 6500 lm 53.9 W 121 lm/w 7700 lm
PRIME PRIME 4 LED ARCHITECTURAL ROUND FLANGED DOWNLIGHT
TYPE: USE OF PRODUCT The 4" Prime Downlight Series is the ideal product for architectural energy efficient lighting in commercial and residential applications. Available in an assortment of color temperatures,
ECO-T LED RECESSED TROFFER USER MANUAL
ECO-T LED RECESSED TROFFER USER MANUAL INSTALLATION GUIDE FOR: 2X2: MLRT22D4535 MLRT22D4541 MLRT22D4550 2X4: MLRT24D5535 MLRT24D5541 MLRT24D5550 Thank you for purchasing this MaxLite product. For additional
STUD TM 3 Linear LED luminaire- T-bar Mount
DESCRIPTION The STUD TM is our most popular linear fixture. It is also the most flexible, allowing you to choose between recessed, surface or pendant mounted options with same extrusion. With DIMENSIONS
RECESSED T-Bar & Drywall. Project. Type. Notes. 3 7/8" 98mm
Project Type Notes PERFORMANCE AT 4000K 11 3/8" 302mm NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 900 lm 11.45 W 79 lm/w 1000 lm 12.88 W 78 lm/w 1200 lm 15.77 W 76 lm/w 1600 lm 21.73 W 74 lm/w * Based on
PENDANT ASYMMETRIC MOUNT - DIRECT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K 3 3 /8 3 3 /8 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 5 lm/ft 4.5 W/ft 11 lm/w 6 lm/ft 5.5 W/ft 19 lm/w 75 lm/ft 6.9 W/ft 16 lm/w 1 lm/ft 9.4 W/ft
Notes: (1) not recommended with staggered lamping (2) Not available with T8 lamping.
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEW 3 5/8" 92mm 2 1/4 57mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH (FT)
PENDANT ASYMMETRIC MOUNT - DIRECT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K 3 3 /8 3 3 /8 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 5 lm/ft 4.5 W/ft 11 lm/w 6 lm/ft 5.5 W/ft 19 lm/w 75 lm/ft 6.9 W/ft 16 lm/w 1 lm/ft 9.4 W/ft
PENDANT MOUNT - DIRECT/INDIRECT
Project Type Flush Spotless Lens - down Glo Lens - up 4 1/2" SHIELDING INDIRECT SHIELDING DIRECT StepLens 1.25 - down SurroundLite up Flush Spotless lens - down SO Spotless Lens SO SurroundLite SurroundLite
Luminaire PROFILE-SPOKE Ind. Up Dn Control (PS3-B) Type. Project. Notes. Performance Summary OPTIONS 4S D 76 W 3S D 57 W
T F W 604.549.9379 604.549.9555 fluxwerx.com PROFILE - SPOKE Specification Data Luminaire PROFILE-SPOKE Ind. Up Dn Control () Type Project Profile Spoke 3 (S3) Product Notes Profile Spoke 4 (S4) Performance
BSS610 GENERAL INFORMATION - FIXTURE HOUSING
BSS610 GENERAL INFORMATION - FIXTURE HOUSING 2 wide multi-axis direct LED luminaire system Project: Type: FEATURES Create an endless variety of multi-directional fixture runs and geometric shapes with
CIRRUS CEILING WALL WASH WITH REMOTE POWER
0.9" 0.9" CIRRUS CEILING WALL WASH (ACTUAL SIZE) CIRRUS CEILING WALL WASH LENS (ACTUAL SIZE) DESCRIPTION At 7.3 or 9.6 watts per foot, Cirrus Channel Wall Wash contains 85+ or 95+ CRI LEDs. Fixture mounts
003 3 foot foot RUN Nominal Length* * For actual lengths see
M125 Project: Type: Qty: Series Lamping Shielding Mounting Nominal Length Finish Voltage Options Series Lamping Shielding Mounting Nominal Length Finish Voltage Options M125 (M125/9 Direct) Multi-Mount
RECESSED - WITH StepLens OPTION. TECHZONE TM AND LOGIX TM COMPATIBLE for more info see page 4 See page 2 for DLC Approved Options
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K Flush shielding option Flush StepLens option Regressed NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.7 W/ft 19 lm/w 5 lm/ft 4.6 W/ft 18 lm/w
CIRRUS SUSPENSION WALL WASH WITH REMOTE POWER, END FEED
Adjustable Max. 5 ft. Description Cirrus Suspension Wall Wash with Remote 24VDC power supply (sold separately) is a linear LED fixture that offers a wall wash lens for a smooth and uniform beam spread.
Notes: 3 13/32. (5) Please consult factory (6) Available with T8 lamp only
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct Indirect 3 13/32 ORDERING CODE 3 13/32 SHOWN WITH LENS OPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PRODUCT SPECIFICATIONS 1 PRODUCT
DESCRIPTION PROJECT: Vega is an efficient architectural LED troffer with a distinctive luminous shielding that features a median textured
DESCRIPTION PROJECT: Vega is an efficient architectural LED troffer with a distinctive luminous shielding that features a median textured APPROVED BY: optic. Using advanced LED SIGNATURE: engines, Vega
PENDANT MOUNT - DIRECT
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K CABLE 2 1 /4 STEM 2 1 /4 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 111 lm/w 5 lm/ft 4.7 W/ft 16 lm/w 75 lm/ft 7.5 W/ft 1 lm/w 1 lm/ft
Project. Type. Notes. (3) D dimming (0-10V) 5% standard
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4000K 5 1 /2 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 400 lm/ft 3.3 W/ft 122 lm/w 500 lm/ft 4.3 W/ft 117 lm/w 750 lm/ft 6.8 W/ft 109 lm/w 1000 lm/ft
NOVA suspension up and down, end feed with remote power supply
Shown without Louver Shown with White Louver Description Nova Suspension Up/Down is a linear LED lighting 2 circuit system that features both direct and indirect light. This contemporary system allows
FINELITE 10 Year LED Warranty
10 Industry Best Year LED Warranty 20I2 Refer to spec page for details High Performance Aperture (HP-4) - Date Project Type Comments Flush Diffuser Flat Diffuser with Regressed DESCRIPTION High Performance
VIA 4 LED RECESSED W W W. L U M E N W E R X. C O M
Grid - regressed lens Drywall - flush lens DESCRIPTION PROJECT: Via 4 is the flexible linear LED luminaire system for pendant, surface and recessed or in-wall installation, whether TYPE: as discrete luminaires,
SURFACE MOUNTED. Project. Type. Notes. culus Listed Type I.C.
Project Type Notes PERFORMANCE AT 4000K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 2400 lm 22.76 W 103 lm/w 4000 lm 41.17 W 97 lm/w 5000 lm 53.46 W 94 lm/w 6500 lm 70.65 W 92 lm/w 7700 lm 85.33 W 90 lm/w
90+ CRI 95+ CRI 95+ CRI 95+ CRI 90+ CRI 95+ CRI
DESPTION 3 LED dedicated IC downlight with precision aiming and punchy, smooth beams SPECIFICATIONS Watts: 23W/14W Volts: 120-277 VAC : 90 or 95 Color consistency: 2-step binning LEDs Life: > 61,000 hours
PENDANT MOUNT - DIRECT. Project. Type. Notes
Project Type Notes Cable 3 3 /8 Stem 3 3 /8 PERFORMANCE PER LINEAR FOOT AT 4K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.3 W/ft 122 lm/w 5 lm/ft 4.3 W/ft 117 lm/w 75 lm/ft 6.8 W/ft 11 lm/w 1
CIRRUS CEILING SQUARE 1 WITH REMOTE POWER
Diffused Square 1 (Actual Size) Description Cirrus Ceiling S1 is a linear LED fixture that offers direct light in a clean, contemporary style. Cirrus is available in various increments from 12" to 720"
LED HIGH BAY - SL STANDARD LIFE BENEFITS APPLICATIONS MARKETS
STANDARD LIFE The LED Round High Bay - SL is an easy LED upgrade for your high ceiling environment, delivering increased lumen output, energy efficiency and cost savings under a 5 year warranty and 50,000
40º 14 1 / Plaster Frame 6. Plaster Skim Coat (by others) ORDERING INFORMATION:
RECESSED TRIMLESS MULTIPLE 3 LIGHT 3LT APPLICATION: Accent and display lighting for retail, commercial and hospitality environments CONSTRUCTION: Stamped steel mounting frame w/integral mounting bars Steel
PENDANT ASYMMETRIC MOUNT
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY Direct/Indirect Direct Indirect UP DOWN 65 lm/ft 4 lm/ft 8.7 w/ft 119 lm/w * Based on a 4 foot luminaire
PENDANT MOUNT. Project. Type. Notes
Project Type Notes CABLE 5 1 /32 STEM 5 1 /32 PERFORMANCE PER LINEAR FOOT AT 4K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 111 lm/w 5 lm/ft 4.6 W/ft 18 lm/w 75 lm/ft 7.4 W/ft 11 lm/w 1
RECESSED ASYMMETRIC MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 5" SHOWN WITH LENS OPTION 3 13/32 ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3
PENDANT MOUNT - DIRECT. Project. Type. Notes
Project Type Notes CABLE 4 5 /32 STEM 4 5 /32 PERFORMANCE PER LINEAR FOOT AT 4K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.3 W/ft 122 lm/w 5 lm/ft 4.3 W/ft 117 lm/w 75 lm/ft 6.8 W/ft 19 lm/w
SERIES RMD8LBV Lensed Remodel/Retrofit Lumen Bridgelux LED Recessed Downlight
APPLICATION Flexible remodel style downlight is suitable for applications where an existing ceiling is present and the benefits of energy saving, long life LED lamp sources are desired. PRODUCT DATA REFLECTOR:
NOVENTA NV3.5 SUSPENDED, WALL, SURFACE, RECESSED. STANDARD SIZES 3.5" Aperture corner profile Configurable in individual straight run sections
NOVENTA NV3.5 SUSPENDED,, SURFACE, RECESSED STANDARD SIZES 3.5" Aperture corner profile Configurable in individual straight run sections LAMPING LED - Direct or Indirect - 80/90 CRI - 3000K/3500K/4000K
RECESSED T-Bar & Drywall. Project. Type. Notes 23 15/16" 23 7/8" SIDE VIEW. culus Listed Type I.C.
Project Type Notes PERFORMANCE AT 4000K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 2500 lm 23.1 W 109 lm/w 3000 lm 28.49 W 105 lm/w 4000 lm 39.22 W 102 lm/w 4400 lm 43.64 W 101 lm/w * Based on a 2'x2'
SERIES RMD6LBV Lensed Remodel/Retrofit Lumen Bridgelux LED Recessed Downlight
APPLICATION Flexible remodel style downlight is suitable for applications where an existing ceiling is present and the benefits of energy saving, long life LED lamp sources are desired. PRODUCT DATA REFLECTOR:
Finelite, Inc Whipple Road Union City, CA / Fax: 510 /
10 Industry Best Year LED Warranty Date Project Type Comments Flush Diffuser Flat Diffuser with Regressed DESCRIPTION High Performance 2" Aperture (HP-2 R) is a patented, linear recessed LED luminaire
LED HIGH BAY - SL 150W 200W BENEFITS APPLICATIONS MARKETS
LED HIGH BAY - SL 150W 200W The LED Round High Bay - SL is an easy LED upgrade for your high ceiling environment, delivering increased lumen output, energy efficiency and cost savings under a 5 year warranty
CAVA CURVE LED PENDANT DIRECT/INDIRECT W W W. L U M E N W E R X. C O M
Shown with open end cap Shown with closed end cap DESCRIPTION PROJECT: Cava is a linear LED recessed and pendant luminaire with a TYPE: remarkably comfortable NOTES: and surprising appearance. Using completely
Seem mm 4.50" 4.00" 101.6mm. Narrow 4" linear fluorescent allows for both individual or continuous runs.
FLUORESCENT recessed companion wall mount companion DIMENSIONAL DATA FEATURES Narrow 4" linear fluorescent allows for both individual or continuous runs. Frosted acrylic flush lens provides even illumination,
1 1 / 4 13 / 16 45º ORDERING INFORMATION: 0-10V v dimming CP - Chicago plenum EM** - emergency battery pack (1 head)
SEMI-RECESSED TRIMLESS MULTIPLE 3 LIGHT 3LT APPLICATION: Accent and display lighting for retail, commercial and hospitality environments CONSTRUCTION: Stamped steel mounting frame with integral mounting
Luminaire PROFILE-SPOKE 15 UP 85 DN LED (PS1-D) Type. Notes. Performance Summary D OPTIONS 3S A 28 W B 34 W C 44 W D 57 W
T F W 604.549.9379 604.549.9555 fluxwerx.com PROFILE - SPOKE Specification Data Luminaire PROFILE-SPOKE 15 UP 85 DN LED () Type Project Profile Spoke 3 (S3) Product Notes Profile Spoke 4 (S4) Performance
BSS610 GENERAL INFORMATION - FIXTURE HOUSING
BSS610 GENERAL INFORMATION - FIXTURE HOUSING 2 wide multi-axis direct LED luminaire system Project: Type: FEATURES Create an endless variety of multi-directional fixture runs and geometric shapes with
RECESSED MOUNT. Outputs between listed min and max are available. Consult factory for outputs outside of the listed range.
Project Type Notes Ordering Guide PERFORMANCE PER LINEAR FOOT AT 4K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 3 lm/ft 3.13 W/ft 96 lm/w 4 lm/ft 4.15 W/ft 96 lm/w 5 lm/ft 5.18 W/ft 97 lm/w 75 lm/ft 7.75
Cylindrix III. Recessed Multiples
Features Cylindrix III Recessed LED, the best combination of optical and thermal performance, aesthetics and visual comfort in an recessed accent. Features a deeply recessed single LED light source for
WALL MOUNT - DIRECT/INDIRECT 0.25" Glo Lens 0.25"
Project Type Louver Notes PERFORMANCE PER LINEAR FOOT AT 3500K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY SHIELDING I/D UPLIGHT DOWNLIGHT Flush Spotless Lens - down Glo Lens - up Glo Lens up and down 1100
DESCRIPTION PROJECT: Via 2 features our Asymmetrical Lens Optic for smooth, comfortable
ORDER GUIDE Shown with ARO2 optics DESCRIPTION PROJECT: Via 2 features our Asymmetrical Lens Optic for smooth, comfortable TYPE: and efficient illumination of vertical NOTES: surfaces. Via 2 Asymmetric
EDGE EX3B-WW 3 Suspended Bidirectional Linear Wall Wash
Project Name Date Type 5-3/8 (136.5mm) EDGE EX3B-WW 3 7/16 (11.1m) 3-1/2 (88.9mm) 11/16 (17.5m) Key Features 6063-T5 Extruded aluminum housing Extruded aluminum module with miro reflector for perfect wall
IC 4 5 YEAR RECESSED MOUNT. Project. Type. Notes 1 9/16 PERFORMANCE PER LINEAR FOOT AT 4000K CONTROL SENSORS
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K 1 9/16 INPUT WATTS* EFFICACY 4 lm/ft 4 W/ft 99 lm/w 5 lm/ft 4.9 W/ft 1 lm/w 63 lm/ft 6.2 W/ft 12 lm/w 75 lm/ft 7.5 W/ft 1 lm/w 9 lm/ft 7.7 W/ft 117
Cylindrix III. Recessed Multiples
Features Cylindrix III Recessed LED, the best combination of optical and thermal performance, aesthetics and visual comfort in an recessed accent. Features a deeply recessed single LED light source for
95+ CRI 90+ CRI 95+ CRI. Product Watts Color Temp CRI Version Driver Optional. 3G 3rd Gen
DESPTION The Novation shallow downlight has a height of just -/ inches with an adjustable housing that utilizes a heat pipe module that can tilt up to and rotate a full. W Output Performance Color Temperature
SURFACE MOUNT. Project: Notes: Type: PROJECT INFORMATION DIMENSIONS END VIEW ORDERING CODE PRODUCT SPECIFICATIONS
1.8.263.AXIS PROJECT INFORMATION Project: Notes: Type: DIMENSIONS END VIEW 3 15/16" 1mm 3 7/16" 87mm ORDERING CODE 1 2 3 4 5 6 7 8 9 1 11 12 13 14 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
Pauluhn ZPL explosionproof LED luminaires For drilling and marine applications
Pauluhn ZPL explosionproof linear LEDs are designed to replace fluorescent T12, T8 and T5HO lighting on marine vessels and land-based and offshore drilling platforms. The rugged and durable design features
Notes: Indirect. 5 1/2" 140mm. 5 1/32 128mm
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct / Indirect Direct Indirect 5 1/2" 14mm 5 1/2" 14mm 5 1/2" 14mm SHOWN WITH LENS OPTION 5 1/32 128mm ORDERING CODE 5 1/32 128mm 5
TRIPLANE TRP Suspended, Surface
TRIPLANE TRP Find additional images and information at alwusa.com/trp TRIPLANE TRP 1. BASE MODEL LED REMOTE DRIVER TRPSD 2.8" W x 2.9" H" suspended, direct with remote driver TRPSMB 2.8" W x 2.9" H" surface-mount,
LUMINAIRE ID DIRECT OPTICS INDIRECT OPTICS LIGHT SOURCE CRI DIRECT LUMEN PACKAGES. LED - high performance LED
ORDER GUIDE Shown with ARO2 optics DESCRIPTION Via 3 features our Asymmetrical Lens Optic for smooth, comfortable and efficient illumination of vertical surfaces. Via 3 Asymmetric offers a wide range of
5 YEAR CONTROL SENSORS
Project Type Louver Notes Flush Spotless Lens - down Glo Lens - up 3 7/8" SHIELDING INDIRECT Glo Lens up and down SurroundLite SurroundLite Asy. Glo Lens 0.25" PERFORMANCE PER LINEAR FOOT AT 3500K NOMINAL
light FULL BLEED APPLICATION SHOT RENDERING
A6 FULL BLEED APPLICATION SHOT RENDERING A6 ANATOMY POWERFUL PERFORMANCE High performance Nichia 80+ CRI LEDs provide an optimal source for tailored ing design. 4.44 3.44 FLEXIBLE SUSPENSION The variety
PERIMETER - RECESSED. Regressed 3" BMPRLED OPRI ( 1) 14 PRODUCT ID LINEAR OR CORNER QTY TOTAL LENGTH. 3D VIEW - Inside Corner Pattern
Flush Regressed 2" Regressed 3" Project Type 6 7 Notes PERFORMANCE PER LINEAR FOOT AT 4K 2 3 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 11 lm/w 5 lm/ft 4.6 W/ft 19 lm/w 75 lm/ft 7. W/ft
PERIMETER - RECESSED. Flush BBPRLED OPRI ( 1) 14 PRODUCT ID LINEAR OR CORNER QTY TOTAL LENGTH. 3D VIEW - Inside Corner Pattern
Regressed 4" Regressed 3" Regressed 2" Flush Project Type 8 6 15 /16 5 15 /16 Notes 4 3 2 PERFORMANCE PER LINEAR FOOT AT 4K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 11 lm/w lm/ft 4.6
VIA 2 PLUS RECESSED W W W. L U M E N W E R X. C O M
VIA 2 PLUS RECESSED W W W. L U M E N W E R X. C O M DESCRIPTION Via 2 PLUS combines the elegance of Via 2 with the added architectural element of a lens which protrudes ½" below the surface plane. Via
RECESSED T-BAR & DRYWALL. Project. Type. Notes. 0.5 StepLens. StepLens
Project Type Notes 2" PERFORMANCE AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 24 lm 25.4 W 94 lm/w 32 lm 34.7 W 92 lm/w 4 lm 43.4 W 92 lm/w * Based on a 2'x2' flush luminaire using one driver. Please
SURFACE MOUNT. See page 3 for DLC Approved options
Project Type Notes Linear version shown Flush 1 3/4 3 1 1/2 2'x6' ceiling kit shown.5 1 3/4 3 1/2 1 1/2 4'x4' ceiling kit shown 2 1 3/4 3 2 PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT
SERIES 4LBV-NF Flush Mount Lumen Bridgelux LED Lensed Downlight
APPLICATION These high-lumen fixtures are ideally suited for lobbies, auditoriums and many other applications with high ceilings, where superior light output is needed. Suitable for commercial, retail,
WALL LO-OUTPUT. Project. Type. Notes
Project Type Notes PERFORMANCE/LINEAR FT AT 3000K AND 3500K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY* 3 9/16 300 lm/ft 2.9 W/ft 104 lm/w 400 lm/ft 3.9 W/ft 102 lm/w 500 lm/ft 5.0 W/ft 100 lm/w 1 5/8"
Luminaires - LED High Bay
80 LED High Bay With STANDARD s high bay line, it is now easy to modernize your commercial or industrial applications; it is the perfect alternative for your traditional lighting system. Our high efficacy
CIRRUS SUSPENSION WITH RECTANGULAR 1 LENS WITH REMOTE POWER, END FEED
Diffused Rectangular 1 Lens Description Cirrus R1 Suspension with Remote Power is a linear LED fixture that offers direct light in a clean, contemporary style. Cirrus R1 is available in various increments
Avenue B. Grid Mount (Regress Trim Shown) Flush Lens. Drywall Flange (Regress Trim Shown) Narrow 3" slot LED with frosted satin lens.
LED corrugated regress trim solid regress trim flush lens DIMENSIONAL DATA Grid Mount (Regress Trim Shown) FEATURES Narrow 3" slot LED with frosted satin lens. Shielding options include corrugated or solid
NOTES: REQUIRES REMOTE DRIVER(S) (see page 4 for more info) LED DRIVE POWER DIRECT INDIRECT* VLO
PROJECT NAME: Carbon 2-3/4 1-3/4 EXTRUDED ALUMINUM USING MACHINED END CAPS PREMIUM LEDS WITH VARIOUS COR TEMPERATURES AND LIGHT OUTPUT FT GW FROSTED LENS TYPE: CABLE SUSPENDED (CS) FEATURES: Powered Suspension
131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 131 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x.0l x 4.0Dp (0 x 1220 x 100) LAMP 1 or 2 lamp
Installation Instructions MX LED Downlight Remodel
1 of 5 Risk of electrical shock. Disconnect power before servicing or installing luminaire. Risk of injury or damage. Luminaire will fail if not installed properly. Follow installation instructions. Risk
LINA DESCRIPTION TYPE MATERIAL LIGHT SOURCE POWER SUPPLY
The family features luminaires with covered linear fluorescent lamps or LED sources. The family contains Tunable White luminaires. The may be connected to long lines of any length or shape. Thanks to luminous
LED HIGH BAY - EXT EXTENDED LIFE BENEFITS APPLICATIONS MARKETS
EXTENDED LIFE The LED Round High Bay - EXT is an easy LED upgrade for your high ceiling environment, delivering increased lumen output, energy efficiency and cost savings under an extended year warranty
CLARA CLA SUSPENDED, WALL, SURFACE
CLARA CLA STANDARD SIZES 4.75" Hollow Lensed Body Configurable in 2ft increments (suspended mount) ADA-Compliant 2ft/4ft wall sconce LAMPING LED - 80+ CRI - 3000K/3500K/4000K Dimming down to 0% FINISH
WALL MOUNT DIRECT/INDIRECT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY LENS UPLIGHT DOWNLIGHT Flush lens shown Flush.5 2 FLUSH 75 lm/ft 5 lm/ft 11.9 W/ft 15 lm/w.5" 75 lm/ft 5
131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x 48.0L x 4.0Dp (300 x 1220 x 100) LAMP 1 or 2 lamp
Project. Type. Notes PRODUCT ID NOM.LUMENS/FT CRI COLOUR TEMP. SHIELDING LENGTH/FT FINISH VOLTAGE
Project Type Notes 3 7/8" 98mm 4 11/16" 119mm PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 5 lm/ft 4.54 W/ft 11 lm/w 6 lm/ft 5.48 W/ft 111 lm/w 8 lm/ft 7.2 W/ft 11 lm/w
DL-FLEX (-UP, -UP-HO, -UP-ULTRA)
-HO -ULTRA DESCRIPTION DL-FLEX series is a unique commercial grade modular lighting system featuring 3 levels of light output with a wide range of accessories and a variety of control options. This unique
MXG2DSTL 3.5 MX G2 LED Square Trimless Downlight
MXG2DSTL 3.5 MX G2 LED Square Trimless Downlight ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt 1 1/2 L0 L1 L2 L3 10W 16W 20W 26W * System Wattage includes
Notes: 4" 102mm. (1) Compatible with Redwood systems
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEW 4" 102mm ORDERING CODE 3 13/32 87mm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 VERSION 3 NOM. LUMENS/FT
Please consult factory for other lumen packages
Project Type Notes 2'x6' ceiling kit shown 4'x4' ceiling kit shown Linear version shown Flush 0.5 StepLens 2 StepLens PERFORMANCE PER LINEAR FOOT AT 3500K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY LENS
2X4 LED RECESSED TROFFER
Page: 1 of 5 MLRT24D PRODUCT DESCRIPTION: Combining high efficiency and a high quality light in a performance-and value-optimized package, MaxLite s ECO-T LED Recessed Troffer represents the inflection
SURFACE MOUNT. (2) D dimming (0-10V) 5% standard
Project Type Notes 2'x6' ceiling kit shown 4'x4' ceiling kit shown Linear version shown Flush 1 3/4 1 1/2 3 Ordering Guide SCS.5 1 3/4 1 1/2 3 1/2 PRODUCT ID NOM. LUMENS/FT CRI COLOR TEMP. SHIELDING SCS
6" Round Downlight. Product Overview Recessed Round Downlight Wattage: 38. Fixture Type. Performance Chart. Electrical Data. 6" Round Downlight
6" Round Downlight Features The 6" downlight shines new light on your bigger jobs. The downlight performs perfectly in large retail and commercial spaces. Designed for higher ceilings, this downlight features
Potenza Commercial Pendant Compact Fluorescent, Incandescent, HID Medium, Large
PRODUCT SPECIFICATIONS PENDANT: Extruded aluminum body with silver powder coat finish. Clear prismatic acrylic diffuser dome provides soft self-illumination. MOUNTING: 4 solid square fixture hanger attached