PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism protected against crushing Fire resistant Long life Sealed versions Degrees of protection (switches mounted on vertical panels) : - standard version : IP54 - sealed version : IP65 Table explaining degrees of protection (IP and I codes) The degree of protection is indicated by letters and numbers. Example : I P 6 5 protection against water protection against dust IP degree of protection provided by the enclosures of electric appliances according to IEC 59 and DIN 40050. I. degree of protection provided by the enclosures of electric appliances against external mechanical impacts according to EN 500 (NFC 0-05). st number : protection against ingress of solid objects IP tests IP nd number : protection against liquids tests I code : mechanical protection 0 Non-protected 0 Non-protected Protected against solid objects of 50 mm (.968) and greater Protected against vertically falling water drops 3 Protected against solid objects of,5 mm (.49) and greater Protected against solid objects of,5 mm (.098) and greater 3 Protected against vertically falling water drops when enclosure tilted up to 5 Protected against water sprayed vertically at an angle up to 60 The degree of mechanical protection is now defined by the letters I according to EN 500 of June 995 (NFC 0-05) 4 Protected against solid objects of mm (.039) and greater 4 Protected against splashing water It is only applicable to the Anti-vandal switch family. See following pages. 5 Dust-protected (no harmful ingress) 5 Protected against water jets from any direction 6 Dust-tight (no ingress) Packaging unit : 0 or 40 pieces depending on models, except AV..4700 (0 pieces), AV06 (60 pieces), AVP, AVL and AV4L with anodised plunger (6 pieces). Mounting accessories : Standard and special hardware are presented in section N. -
PUSHBUTTON SWITCHES Distinctive features The AV series is a large range of security pushbutton switches including 4 product families : ANTI-VANDAL PUSHBUTTON SWITCHES (page -4) Increased impact resistance provided by a nut or mechanical stop Stainless steel actuator and bushing SECURITY PUSHBUTTON SWITCHES WITH LARGE ACTUATOR (page -7) Ergonomic actuator dia. 0 mm (.787) or 30 mm (.8) Tactile feedback Up to 5A 50VAC OTHER SECURITY PUSHBUTTON SWITCHES (page -0) A large variety of actuator shapes, electrical functions, connections, finish and marking options SNAP-ACTION SECURITY PUSHBUTTON SWITCHES (page -5) Tactile feedback Illuminated or non-illuminated -3
ANTI-VANDAL PUSHBUTTON SWITCHES Distinctive features and specifications Increased impact resistance provided by a nut or mechanical stop Stainless steel actuator and bushing SPECIFICATIONS Max. current/voltage rating with resistive load : A 48 VDC Initial contact resistance : 0 mω max. at A V Insulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.000 Vrms 50 Hz min. between terminals and frame.000 Vrms 50 Hz min. between terminals Electrical life : 0.000 cycles at full load Torque : 5 Nm min.- 4 Nm max. applied to nut Panel thickness : (.039) to mm (.433) max. Operating temperature : -0 C to +55 C Mechanical life :.000.000 cycles MATERIALS : PBT s : brass, silver plated (C) Bushing : stainless steel Actuator : stainless steel CUT-OUTS Panel cut-out : Ø 9, mm (.755) or Ø, mm (.874) Min. pitch for matrix mounting : 30 mm (.8) x 30 mm (.8) ROBUSTNESS Model Ø 9 mm (.748) Model Ø mm (.866) Degree of protection according to EN 500, June 95 (NFC 0-05).7 g 9.5 cm Hammer radius 5 mm I08 Striking energy: 5 joules (5Nm) 5 g 40 cm Hammer radius 50 mm I0 Striking energy: 0 joules (0Nm) Impacts on actuator according to CECC 96000 Hammer radius 0 mm 0.3 g 34 cm 0 strokes Striking energy: joule (Nm).5 g 34 cm 0 strokes Striking energy: 5 joules (5Nm) -4
ANTI-VANDAL PUSHBUTTON SWITCHES Bushing Ø 9 (.748) Series Function Terminal Sealing AV 00 3 C 40 NO (function 3) 09 9 9D 9 N T Flat actuator - AV09..40N Hex nut (.866) across flats ø9.00x.00 SI (.748DIAx.00 IS) 5.00 (.96) 7.30 (.87).80 (.0) AV09003C940N Solder lug / quick-connect term. AV09003C40N ø.00 ø5.00 ø.50 (.098DIA) ø.00.80x0.5 (.0x.09).0 (.047).00 9.50 6.50 (.374) (.55) EPOXY OTHER CONFIGURATIONS Flush model 3.60 (.4) Ø.00.00 Ø.00 Ø.0 Mini (.874DIA Min.).0 (.047).30 Mini (.05 Min.) Ø9.0 (.755DIA) AV9003C940N Solder lug / quick-connect terminals AV9003C40N AV9D003C940N Solder lug / quick-connect terminals AV9D003C40N SEALING To order a sealed product, replace N with T at the end of above part numbers. T ➀ internal gasket ➁ external gasket Front panel sealing (IP65) Robustness : see Specifications page. -5
ANTI-VANDAL PUSHBUTTON SWITCHES Bushing Ø (.866) Series Function Terminal Sealing AV 00 3 C 40 NO (function 3) 03 0 M3 M 9 N T Flat actuator - AV03..40N Hex nut 5 (.984) across flats.00 ø.00x.00 SI (.866DIAx.00 IS) 7.30 (.87).80 (.0) AV03003C940N.0 (.047) Solder lug / quick-connect term. AV03003C40N ø5.00 ø5.00 (.59DIA) ø.50 (.098DIA).80x0.5 (.0x.09).70 (.500) 6.30 (.48) 5.00 (.96) EPOXY OTHER CONFIGURATIONS Flatted bushing 3.60 (.4) Ø5.00.00 Ø5.00 AV0003C940N Solder lug / quick-connect term. AV0003C40N Flat actuator AVM3003C940N AVM003C940N Ø.0 (.874DIA) 0.00 (.393 ) SEALING To order a sealed product, replace N with T at the end of above part numbers. T ➀ internal gasket ➁ external gasket Front panel sealing (IP65) Robustness : see Specifications page. -6
SECURITY PUSHBUTTON SWITCHES WITH LARGE ACTUATOR Bushing Ø (.866) Combined NC/NO Series Bushing diameter AV Actuator matl L 40 P B C / terminals 4 See next page. SPECIFICATIONS Max. current/voltage rating with resistive load : 5A 50VAC Initial contact resistance : 00 mω max. Insulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.000 Vrms 50 Hz min. between terminals and frame Electrical life :.000.000 cycles at A 50VAC 00.000 cycles at full load Torque : 5 Nm min.- 4 Nm max. applied to nut Panel thickness : (.039) to 6 mm (.36) max. Operating temperature : -0 C to +55 C Mechanical life : 0.000 cycles Front panel sealing : IP65 MATERIALS : polyester, glass filled s : silver/nickel alloy Bushing : stainless steel (std) Actuator : stainless steel (std) CUT-OUT Panel cut-out : Ø, (.874) or Ø 4, (.95) Min. pitch for matrix mounting : 30 mm x 30 mm (.8x.8) All model numbers below are for switches with standard bushing/actuator. Flat actuator - solder lug terminals - AVLP O-ring 9.00 (.4) Hex nut 5 (.984) across flats.50 (.49) AVLP40 Ø6.00 (.03DIA) Ø0.00 (.787DIA) 4.00 (.57) 0.50 (.09) Ø.00x.00 SI (.866DIAx.00 IS).40 (.055).40 (.094) OTHER CONFIGURATIONS Recessed actuator AVLB40 AVLC40-7
SECURITY PUSHBUTTON SWITCHES WITH LARGE ACTUATOR Bushing Ø 4 (.944) - low profile Flat actuator - solder lug terminals - AV4LP O-ring 30.80 (.3) Hex nut 7 (.06) across flats 4.0 (.559) AV4LP40 Ø30.00 (.8DIA) Ø0.00 (.787DIA) Ø4.00x.00 SI (.944DIAx.00 IS).40 (.055).40 (.094).30 (.05) 4.00 (.57) 0.50 (.09) OTHER CONFIGURATIONS Recessed actuator AV4LB40 AV4LC40 BUSHING/ACTUATOR MATERIAL For non-standard, replace 40 with one of the following codes. Models with non-anodized actuator CODE BUSHING ACTUATOR 40 (standard) Stainless steel Stainless steel 0 Chrome plated brass Chrome plated brass Models with anodized actuator CODE BUSHING ACTUATOR COLOUR Black chrome plated brass Chrome plated brass 4 Stainless steel Replace with colour code opposite. Colours : black 3 : pale green 5 : gold yellow 6 : red CONTACT / TERMINALS (standard) NC/NO, solder lug terminals ø.40 (.055 DIA) 4 NC/NO, quick-connect terminals 4.80 (.0) -8
MUSHROOM HEAD SECURITY PUSHBUTTON SWITCHES Bushing Ø (.866) Series Bushing diameter Actuator colour / terminals AV PNA Combined NC/NO 3 4 5 6 4 SPECIFICATIONS Max. current/voltage rating with resistive load : 5A 50VAC Initial contact resistance : 00 mω max. Insulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.000 Vrms 50 Hz min. between terminals and frame Electrical life :.000.000 cycles at A 50VAC 00.000 cycles at full load Torque : 5 Nm min.- 4 Nm max. applied to nut Panel thickness : (.039) to 6 mm (.36) max. Operating temperature : -0 C to +55 C Mechanical life :.000.000 cycles Front panel sealing : IP65 MATERIALS : polyester, glass filled s : silver/nickel alloy Bushing : brass, nickel plated Actuator : aluminium, anodized CUT-OUT Panel cut-out : Ø, (.874) Min. pitch for matrix mounting : 30 mm x 30 mm (.8x.8) Solder lug terminals - red actuator - AVPNA 5.00 (.984) Hex nut 5 (.984) across flats Joint (O-ring) 8.50 (.334) AVPNA6 ø30.00 (.8DIA) 0.80 (.45) 4.00 (.57) 0.50 (.09) ø.00x.00 SI (.866DIAx.00 IS).40 (.055).40 (.094) ACTUATOR COLOUR : black - 3 : green - 4 : grey - 5 : yellow - 6 : red CONTACT / TERMINALS (standard) NC/NO, solder lug terminals ø.40 (.055 DIA) 4 NC/NO, quick-connect terminals 4.80 (.0) -9
SECURITY PUSHBUTTON SWITCHES Bushing Ø 6 (.69) Series Function matl. Term. Sealing AV 3 0 C 9 NO (function 3) 06 6 08 00 40 See options page. SPECIFICATIONS Max. current/voltage rating with resistive load : 00mA 48 VDC - 00mA 48VDC Initial contact resistance : 50 mω max. Insulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.000 Vrms 50 Hz min. between terminals and frame Electrical life : 50.000 cycles at 00mA 48VDC 00.000 cycles at 00mA 48VDC Torque : 5 Nm min.- 4 Nm max. applied to nut Panel thickness : (.039) to 6 mm (.36) max. Operating temperature : -0 C to +55 C Mechanical life :.000.000 cycles MATERIALS : PBT s : brass, silver plated (C) Bushing and actuator : - nickel plated brass (std), code 00 - stainless steel, option 40 CUT-OUT Panel cut-out : Ø 6, (.637) Min. pitch for matrix mounting : 4 mm x 4 mm (.944 x.944) All model numbers below are for switches with standard bushing/actuator, without marking. Flat actuator - screw terminals - AV06 Hex nut 9 (.748) across flats ø.50 (.098DIA) AV0630C900 ø8.00 (.708DIA) ø.00 (.47DIA) ø6.00x.00 SI (.69DIAX.00 IS) w. chamfer.50 (.059).50 (.059) 9.50 (.374).0 (.440) OTHER CONFIGURATIONS.50 (.059).00 AV630C900 AV0830C900-0
SECURITY PUSHBUTTON SWITCHES Bushing Ø 9 (.748) Series Function matl. Term. Marking Sealing AV 00 3 C 00 NO (function 3) 09 9 9P 9B 9 See options page. SPECIFICATIONS Max. current/voltage rating with resistive load : A 48 VDC Initial contact resistance : 0 mω max. at A V Insulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.000 Vrms 50 Hz min. between terminals and frame.000 Vrms 50 Hz min. between terminals Electrical life : 0.000 cycles at full load Torque : 5 Nm min.- 4 Nm max. applied to nut Panel thickness : (.039) to mm (.433) max. Operating temperature : -0 C to +55 C Mechanical life :.000.000 cycles MATERIALS : PBT s : brass, silver plated (C) Bushing : brass, nickel plated (std) Actuator : brass, nickel plated (std) CUT-OUT Panel cut-out : Ø 9, mm (.755) Min. pitch for matrix mounting : 30 mm (.8) x 30 mm (.8) All model numbers below are for switches with standard bushing/actuator, without marking. Flat actuator - AV09..00 Hex nut (.866) across flats.00 ø9.00x.00 SI (.748DIAx.00 IS) 7.30 (.87).80 (.0) AV09003C900 Solder lug / quick-connect term. AV09003C00 ø.00 ø5.00 3.50 (.53) 5.50 (.6) ø.50 (.098DIA) 5.00 (.96).80x0.5 (.0x.09).0 (.047) EPOXY OTHER CONFIGURATIONS 3.60 (.4) Ø.00.00 With knurled nut for matrix mounting 5 (.984) x 5 (.984) Ø.00 4.50 (.77) Ø.00 4.50 (.77) 5.00 (.984) 5.00 5.00 (.984) (.984) AV9003C900 Solder lug / quick-connect terminals AV9003C00 Flat actuator, screw term. AV9P003C900 Flat actuator, solder lug term. AV9P003C00, screw term. AV9B003C900 Curved act., solder lug term. AV9B003C00 Wrench available under P/N U99. -
SECURITY PUSHBUTTON SWITCHES Bushing Ø (.866) Series Function matl. Term. Marking Sealing AV 00 3 C 00 NO (function 3) 03 0 M3 M 9 See options page. SPECIFICATIONS Max. current/voltage rating with resistive load : A 48 VDC Initial contact resistance : 0 mω max. at A V Insulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.000 Vrms 50 Hz min. between terminals and frame.000 Vrms 50 Hz min. between terminals Electrical life : 0.000 cycles at full load Torque : 5 Nm min.- 4 Nm max. applied to nut Panel thickness : (.039) to mm (.433) max. Operating temperature : -0 C to +55 C Mechanical life :.000.000 cycles MATERIALS : PBT s : brass, silver plated (C) Bushing : brass, nickel plated (std) Actuator : brass, nickel plated (std) CUT-OUTS Panel cut-out : Ø, mm (.874) Min. pitch for matrix mounting : 30 mm (.8) x 30 mm (.8) All model numbers below are for switches with standard bushing/actuator, without marking. Flat actuator - AV03..00 Hex nut 5 (.984) across flats.00 ø.00x.00 SI (.866DIAx.00 IS) 7.30 (.87).80 (.0) AV03003C900.0 (.047) Solder lug / quick-connect term. AV03003C00 ø5.00 ø5.00 (.59DIA) ø.50 (.098DIA).80x0.5 (.0x.09).70 (.500) 6.30 (.48) 5.00 (.96) EPOXY OTHER CONFIGURATIONS Flatted bushing 3.60 (.4) Ø5.00.00 Ø5.00 AV0003C900 Solder lug / quick-connect terminals AV0003C00 Flat actuator AVM3003C900 AVM003C900 Ø.0 (.874DIA) 0.00 (.393 ) -
SECURITY PUSHBUTTON SWITCHES Bushing Ø 9 (.748) or Ø (.866) - other electrical functions Bushing Ø 9 (748) - combined NC/NO - AV..9035 Single pole, solder lug terminals Gold plated silver contacts Current/voltage rating with resistive load : - max. : A 30V - min : 0µA 5V Note : a current above 00mA damages the gold plating. Dielectric strength :.000 Vrms between terminals.000 Vrms between terminals and frame Electrical life : 50.000 cycles at full load Mechanical life :.000.000 cycles Further specifications : see previous page. Flat actuator AV099035D00 AV99035D00 Ø.00.00 3.60 (.4) Ø9.00x.00 SI (.748DIAx.00 IS) 5.00 (.590) Hex nut (.866) across flats 7.50 (.95).0 (.047) 0.80 (.03) 5.0 (.04).00x0.40 (.078x.05) 5.08 (.00) Bushing Ø (.866) - Normally closed (NC) - AV..00 Single pole, screw terminals, without marking Silver plated copper contacts (C) Max. current/voltage rating with resistive load : A 50VAC - 3A 5VAC -,5A 4VDC Dielectric strength :.000 Vrms 50 Hz min. betw. terminals and frame.000 Vrms. 50 Hz min. between terminals Electrical life : 00.000 cycles at 0,3A 4VAC or DC 0.000 cycles at full load Further specifications : see previous page. Flat actuator AV030C00 AV00C00 (.59DIA) Ø5.00 (.59DIA) 3.60 (.4) Hex nut 5 (.984) across flats Ø.00x.00 SI (.866DIAx.00 IS).00 4.00 (.55) 5.40 (.606) Øx0.50 (.8DIAx.0.50) 7.00 (.75) 3.0 (.59) Bushing Ø (.866) - alternate action - AV..4700 Double pole, solder lug/quick-connect term., curved actuator Silver contacts Max. current/voltage rating with resistive load : 3(,5)A 50VAC - 6A 5VAC - 3A 4VAC or DC Dielectric strength : 0 Vrms min. between terminals and frame Electrical life : 0.000 cycles at full load 50.000 cycles at A 4VAC or DC Mechanical life : 00.000 cycles Further specifications : see previous page. Ø5.00 (.59DIA) Ø.00x.00 SI (.866DIAx.00 IS).60 (.063) Hex nut 5 (.984) across flats 0.50x.80 (.09x.0) 5.80 (.8) 8.40 (.330) AV044746A00 ON - ON 3.60 (.4) 4.00 (.55) 0.60 7.0 (.8) (.83) Bushing/actuator s, marking and sealing : see options on next page. -3
SECURITY PUSHBUTTON SWITCHES Options After selecting basic model number, fill in last 3 boxes with desired options. Series AV Function matl. Term. Marking Sealing BUSHING/ACTUATOR MATERIAL For non-standard, replace 00 with one of the following codes. Models with flat or curved metal actuator CODE BUSHING ACTUATOR 00 (standard) Nickel plated brass Nickel plated brass 0 Nickel plated brass Stainless steel Nickel plated brass Chrome plated brass 0 Chrome plated brass Chrome plated brass 30 Chrome plated brass Stainless steel 80 Varnished polished brass Varnished polished brass Models with flat thermoplastic actuator CODE BUSHING ACTUATOR COLOUR 0 (standard) Nickel plated brass Chrome plated brass 8 Varnished polished brass Replace with colour code opposite. Colours : blue : black 3 : green 4 : grey 5 : yellow 6 : red 7/: white 9 : orange MARING For flat or curved actuator. Not available on model AV030C00. - by engraving on brass actuator (stainless steel on request) - by hot stamping on thermoplastic actuator. 8.00 (0.34).50 (0.059) (0.590DIA) CODE TYPE OF MARING TYPE 0 to 9 Numbers 0 to 9 X Symbol * Y Symbol # A to N Letters A to N P to W Letters P to W 0 Letter O Letter O : same code and same design as number 0. For special symbols, consult factory. Minimum order : 500 pieces Select an option from each of the two tables below. CODE COLOUR OF MARING COLOUR Brass actuator 0 (standard) Same as finish Black Note : a finished product supplied in version 0 cannot be modified to version "". Thermoplastic actuator Black 7 White SEALING Blank No sealing Frontal panel sealing (IP65) For s with bushing Ø 6 ➀ elastomer membrane ➁ external gasket ➀ internal gasket ➁ external gasket Front panel sealing (IP65) For s with bushing Ø 9 or Ø -4
SNAP-ACTION SECURITY PUSHBUTTON SWITCHES Bushing Ø 9 (.748) - Illuminated or not NO (function 3) Series Illum. or not Funct. matl. Term. LED colour AV C7 3 D 00 09 9 L 0 Marking Seal. See options on next page. SPECIFICATIONS Max. current/voltage rating with resistive load : 50mA 4VDC LED voltage and consumption : Two-colour LED V (3V max.) 0mA Other colours : V (3V max.) 0mA (a resistor must be series-connected by the user) Initial contact resistance : 00 mω max. Insulation resistance :.000 MΩ min. at 500VDC Dielectric strength : 500 Vrms 50 Hz min. between terminals.000 Vrms 50 Hz min. between terminals and bushing Electrical life :.000.000 cycles at full load Operating force : 7 N +/-N Travel : 0,7 mm (.07) +/- 0, mm (.003) Torque : 5 Nm min.- 4 Nm max. applied to nut Panel thickness : (.039) to mm (.433) max. Operating temperature : -30 C to +70 C Soldering : 70 C max. during 3 sec. MATERIALS : PBT UL94-V0 Terminals : brass, gold plated s : gold plated dome Bushing : brass, nickel plated (std) Actuator : brass, nickel plated (std) LED CUT-OUTS Panel cut-out : Ø 9, mm (.755) Min. pitch for matrix mounting : 30 mm (.8) x 30 mm (.8) All model numbers below are for switches with standard bushing/actuator, without marking. Flat actuator - solder lug terminals - non-illuminated Hex nut (.866) across flats 0.80 (.03).00 Ø9.00x.00 SI (.748DIAx.00 IS).90 (.074) AV09C703D00.80 (.070).0 (.043) Ø.00 Also available with curved actuator : AV9C703D00 5.08 (.00) 3.50 (.53) 3.90 (.53) 4.5 (.63) Flat actuator - solder lug terminals - illuminated Hex nut (.866) across flats 0.60x.80 (.03x.070).0 (.480) Ø9.00x.00 SI (.748DIAx.00 IS).00.90 (.074) AV09C7L3D00.80x0.80 (.070x.03).0 (.043) Ø.00 Ø0.00 (.393DIA) 5.08 (.00) 3.50 (.53) 3.90 (.53) 4.5 (.63) -5
SNAP-ACTION SECURITY PUSHBUTTON SWITCHES Options After selecting basic model no., fill in last 4 boxes with desired options. Series AV Illum. or not Funct. matl. Term. LED colour Marking Seal. BUSHING/ACTUATOR MATERIAL Non-illuminated models CODE BUSHING ACTUATOR For non-standard, replace 00 with one of the following codes. Illuminated models CODE BUSHING ACTUATOR 00 (std) Nickel plated brass Nickel plated brass 0 Nickel plated brass Stainless steel 30 Chrome plated brass Stainless steel 40 Stainless steel Stainless steel 80 Varnished polished brass Varnished polished brass 00 (std) Nickel plated brass Nickel plated brass 0 Chrome plated brass Chrome plated brass 40 Stainless steel Stainless steel 45 Stainless steel Nickel plated brass 80 Varnished polished brass Varnished polished brass LED COLOUR Blank No LED : Blue - 3 - Green - 5 - Yellow - 6 : Red - 7 : White - 9 : Orange - : Red/green For flat or curved actuator. - by engraving on non-illuminated brass actuator (stainless steel on request). - by hot stamping on thermoplastic insert ( illuminated actuators) 8.00 (0.34) MARING.50 (0.059) Ø0.00 (0.393DIA).00 (0.039) CODE TYPE OF MARING TYPE 0 to 9 Numbers 0 to 9 X Symbol * Y Symbol # A to N Letters A to N P to W Letters P to W 0 Letter O Letter O : same code and same design as number 0. For special symbols, consult factory. Minimum order : 500 pieces Select an option from each of the two tables below. CODE COLOUR OF MARING COLOUR Non-illuminated actuators 0 (standard) Same as finish Black Note : a finished product supplied in version 0 cannot be modified to version "". Illuminated actuators Black (on white) SEALING Blank No sealing -6 Front panel sealing (IP65) ➀ internal gasket ➁ external gasket