CAMSHAFTS CAMSHAFTS CHRYSLER 8-440 C.I. 8 CYL. 1959-1980 high energy HYDRAULIC Excellent torque and mileage for 8-400 2 or 4 BBL. Smooth idle. Light towing, 9:1 compression. Good OEM upgrade. HYDRAULIC OEM replacement for 8, 440. 9:1 compression. Smooth idle. Good for towing. Use 625 CFM carb and dual plane manifold. RPM CAMSHAFT CAM DURATION LIFT LOBE TING OPERATING PART GRIND ADVERTISED @.050" W/ 1.5 SEP. Hyd. Hyd. 800 to 4800 Hyd. Hyd. 1000 to 5000 21-212-4 21-21-4 252H 252 252 206 206.425.425 110 260H 260 260 212 212.440.440 110 HYDRAULIC Great replacement for 8 Magnum with 650-750 CFM carb, dual plane manifold, etc. Smooth idle 440, super torque. HYDRAULIC Great replacement for 440 with 700-800 CFM or six pack, noticeable idle in 8. Slight idle in 440. Largest cam w/ stock converter. Hyd. Hyd. 1200 to 5200 Hyd. Hyd. 1800 to 5500 21-215-4 21-06-4 268H 268 268 218 218.454.454 110 270H 270 270 224 224.470.470 110 HYDRAULIC For 9:1 to 10:1 compression. 8 needs 2500 stall. 440 needs 2000+ stall. Use 700-800 CFM carburetor, headers,.91+ gears. Hyd. Hyd. 2500 to 5800 21-27-4 280H 280 280 21 21.480.480 110 HYDRAULIC Serious street/strip effort. 8 needs 000-500+ stall. 440 needs 2500-000. 750 to 800 CFM carb and headers,.91+ gear. Hyd. Hyd. 000 to 6200 21-242-428 292H 292 292 244 244.501.501 110 HYDRAULIC Pro Street. 8 needs 500-700+ stall. 440 needs 000-00+ stall. 850 CFM carb, 10:1 + compression. Headers and good int,.90-4.0 gear. Hyd. Hyd. 500 to 6500 21-24-428 05H 05 05 25 25.525.525 110 XTREME energy HYDRAULIC Very strong torque, excellent mileage, smooth idle. Hyd. Hyd. 600 to 4800 21-220-4 XE250H 250 260 206 212.42.444 110 HYDRAULIC Strong torque through low end and mid-range, good idle. Hyd. Hyd. 1000 to 5200 21-221-4 XE256H 256 268 212 218.447.455 110 HYDRAULIC Excellent response, good mileage, stock converter,.2 gear. Hyd. Hyd. 100 to 5600 21-222-4 XE262H 262 270 218 224.462.470 110 HYDRAULIC Great for street machines, slightly rough idle, works with stock converter, but best with 1800+ stall. Hyd. Hyd. 1600 to 5800 21-22-428 XE268H 268 280 224 20.477.480 110 HYDRAULIC High performance street. Very strong mid-range with headers, 2200+ stall. Hyd. Hyd. 1800 to 6000 21-224-428 XE274H 274 286 20 26.488.491 110 HYDRAULIC Street/strip, needs 2800+ stall, 9:1 compression, rough idle. Hyd. Hyd. 200 to 6500 21-225-428 XE284H 284 296 240 246.507.510 110 HYDRAULIC Pro Street/bracket, good intake, headers, gear, 200+ stall. Hyd. Hyd. 2800 to 6800 21-226-428 XE294H 294 06 250 256.519.524 110 42 WWW.COMPCAMS.COM Except as noted, not legal for sale or use on pollution-controlled motor vehicles
KITS & COMPONENTS K21-212-4 SK21-212-4 CL21-212-4 204 K21-21-4 SK21-21-4 7 CL21-21-4 7 204 K21-215-4 SK21-215-4 7 CL21-215-4 7 204 K21-06-4 SK21-06-4 7 CL21-06-4 7 K21-27-4 SK21-27-4 7 CL21-27-4 7 CHRYSLER 8-440 C.I. 8 CYL. 1959-1980 867-16 7 104 867-16 7 104 1621-16 2 926-16 744-16 606-16 26 504-16 1621-16 2 926-16 744-16 606-16 26 504-16 1621-16 2 926-16 744-16 606-16 26 504-16 1621-16 2 1621-16 2 high energy CHRYSLER/DODGE/PLYMOUTH K21-242-4 SK21-242-4 7 CL21-242-4 7 867-16 7 104 1621-16 2 1071-KIT 2 627-1626 K21-24-4 SK21-24-4 7 CL21-24-4 7 867-16 7 104 1621-16 2 1071-KIT 2 627-1626 K21-220-4 SK21-220-4 7 CL21-220-4 7 204 XTREME energy 1621-16 2 926-16 744-16 606-16 26 504-16 K21-221-4 SK21-221-4 7 CL21-221-4 7 204 1621-16 2 926-16 744-16 606-16 26 504-16 K21-222-4 SK21-222-4 7 CL21-222-4 7 867-16 7 204 1621-16 2 748-16 K21-22-4 SK21-22-4 7 CL21-22-4 7 867-16 7 204 1621-16 2 748-16 K21-224-4 SK21-224-4 7 CL21-224-4 7 867-16 7 204 1621-16 2 1071-KIT 2 748-16 K21-225-4 SK21-225-4 7 CL21-225-4 7 867-16 7 204 1621-16 2 1071-KIT 2 748-16 K21-226-4 SK21-226-4 7 CL21-226-4 7 867-16 7 204 1621-16 2 1071-KIT 2 627-1626 Footnotes: Master Footnote Index on page 15. 2 Requires machining on cylinder heads 7 Stock springs cannot be used 2 Includes special shafts & spacers 26 1/2 set 2 groove; 1/2 set 4 groove 28 -Bolt core available. Change first 2 digits of part # to 2. RED NUMBERS ARE THE PREMIUM CHOICE 7 Adjustable valve train required 61 Pre-1968 use Part #824-16 lifters 1.800.999.085 4
CAMSHAFTS CAMSHAFTS CHRYSLER 8-440 C.I. 8 CYL. 1959-1980 THUMPR New HYDRAULIC Thumpr High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle. HYDRAULIC Mutha Thumpr High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle. HYDRAULIC Big Mutha Thumpr Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle. XTREME energy HI-LIFT HYDRAULIC Best all around street performance cam. 9:1 compression with 2500+ stall. Extra lift for upper rpm power. HYDRAULIC Hot street cam. 10:1 compression lower gears, headers and 000+ stall. Strong mid-range with a rough idle. HYDRAULIC Serious street and bracket race cam. 10:1 compression, lower gears, headers and 500+ stall. DUAL ENERGY HYDRAULIC Good torque and mileage, good RV and towing cam. HYDRAULIC Very strong mid-range and torque, mild performance cam. HYDRAULIC High performance street, good mid-range and high end, choppy idle. NOSTALGIA PLUS /PURPLE PLUS HYDRAULIC 2500 stall with 9.5:1 compression, strong mid-range with early muscle car sound. HYDRAULIC Strong mid-range with a lopey idle, 2800 + stall with 9.5:1 compression, replaces the popular 484 cam. HYDRAULIC Strong bracket/street cam. 10:1 compression. 500+ stall. Excellent replacement for the 509 cam. MUSCLE HYDRAULIC Factory I.D. #2899206 for: 8c.i., 1968-70, factory 5 hp 8c.i., 1971, factory 00 hp 440c.i., 1967-70, factory 75/90 440c.i., 1971, factory 70/85. RPM CAMSHAFT CAM DURATION LIFT LOBE TING OPERATING PART GRIND ADVERTISED @.050" W/ 1.5 SEP. Hyd. Hyd. 2000 to 5800 21-600-528 Hyd. Hyd. 2200 to 6100 21-601-528 Hyd. Hyd. 2500 to 6400 21-602-528 Hyd. Hyd. 2000 to 5800 21-227-428 Hyd. Hyd. 2500 to 6200 21-228-428 Hyd. Hyd. 000 to 6500 21-229-428 Hyd. Hyd. 1000 to 5000 21-402-4 Hyd. Hyd. 1500 to 5250 Hyd. Hyd. 1800 to 5500 Hyd. Hyd. 2000 to 6000 Hyd. Hyd. 200 to 600 Hyd. Hyd. 000 to 6500 21-404-4 21-406-4 21-670-4 21-671-4 21-672-4 279TH7 279 296 227 241.486.47 107 287TH7 287 04 25 249.497.48 107 295TH7 295 12 24 257.507.494 107 XE275HL 275 287 21 27.525.525 110 XE285HL 285 297 241 247.545.545 110 XE295HL 295 07 251 257.564.564 110 255DEH 255 275 205 219.422.462 110 265DEH 265 277 214 229.442.482 110 275DEH 275 284 219 25.462.482 110 PP280H 280 287 2 240.474.474 110 PP284H 284 291 29 246.484.484 108 PP292H 292 299 247 254.509.509 108 (Today s Version Of Yesterday s Muscle Car Cams) RPM CAMSHAFT CAM DURATION LIFT LOBE TING OPERATING PART GRIND ADVERTISED @.050" W/ 1.5 SEP. Hyd. Hyd. 1600 to 5600 21-05-47 268AH-10 268 276 222 226.464.464 110 44 WWW.CAMHELP.COM Except as noted, not legal for sale or use on pollution-controlled motor vehicles
KITS & COMPONENTS K21-600-5 CL21-600-5 7 K21-601-5 CL21-601-5 7 K21-602-5 CL21-602-5 7 K21-227-4 SK21-227-4 7 CL21-227-4 7 K21-228-4 SK21-228-4 7 CL21-228-4 7 K21-229-4 SK21-229-4 7 CL21-229-4 7 CHRYSLER 8-440 C.I. 8 CYL. 1959-1980 822-16 867-16 7 104 822-16 867-16 7 104 822-16 867-16 7 104 867-16 7 104 867-16 7 104 867-16 7 104 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 THUMPR 748-16 741-16 627-1626 748-16 741-16 627-1626 748-16 741-16 627-1626 XTREME energy HI-LIFT 627-1626 627-1626 627-1626 CHRYSLER/DODGE/PLYMOUTH K21-402-4 SK21-402-4 7 CL21-402-4 7 104 K21-404-4 SK21-404-4 7 CL21-404-4 7 104 K21-406-4 SK21-406-4 7 CL21-406-4 7 867-16 7 104 1621-16 2 1621-16 2 1621-16 2 DUAL ENERGY NOSTALGIA PLUS /PURPLE PLUS K21-670-4 CL21-670-4 7 867-16 7 104 1621-16 2 K21-671-4 CL21-671-4 7 867-16 7 104 1621-16 2 K21-672-4 CL21-672-4 7 867-16 7 104 1621-16 2 1071-KIT 2 741-16 627-1626 LIFTERS (Today s Version Of Yesterday s Muscle Car Cams) TIMING RETAINERS LASH CAPS MUSCLE REV. KIT DIST. GEAR STUD GIRDLES 867-16 7 104 1621-16 2 1071-KIT 2 926-16 744-16 741-16 606-16 504-16 627-16 26 622-16 424 Footnotes: Master Footnote Index on page 15. 2 Requires machining on cylinder heads 7 Stock springs cannot be used 2 Includes special shafts & spacers 26 1/2 set 2 groove; 1/2 set 4 groove 28 -Bolt core available. Change first 2 digits of part # to 2. RED NUMBERS ARE THE PREMIUM CHOICE 7 Adjustable valve train required 61 Pre-1968 use Part #824-16 lifters 1.800.999.085 45
CAMSHAFTS CAMSHAFTS CHRYSLER 8-440 C.I. 8 CYL. 1959-1980 XTREME energy Retro-Fit Hydraulic Roller Camshafts HYDRAULIC ROLLER.55-4.10 gear, 2000 stall in 440, 2200+ in 8, 9:1 compression, high performance street. HYDRAULIC ROLLER.91+ gear, 2500+ stall, 9.5:1 compression, aftermarket intake, headers. RPM CAMSHAFT CAM DURATION LIFT LOBE TING OPERATING PART GRIND ADVERTISED @.050" W/ 1.5 SEP. Hyd. Hyd. 1800 to 5800 2-710-97 Hyd. Hyd. 2200 to 6000 2-711-97 XR274HR-10 274 282 224 20.58.54 110 XR280HR-10 280 288 20 26.541.57 110 HYDRAULIC ROLLER.91+ gear, 9.5:1+ compression, 2800+ stall, needs headers, rough idle. Hyd. Hyd. 2500 to 6200 2-712-97 XR286HR-10 286 294 26 242.544.541 110 New HYDRAULIC ROLLER 4.10 gear, 000+ stall, 10:1 compression, very rough idle, Pro Street/bracket race applications. THUMPR Retro-Fit Hydraulic Roller Camshafts HYDRAULIC ROLLER Thumpr High performance street, stock converter ok, best with 2000+ converter and gears, choppy/thumping idle. Hyd. Hyd. 2800 to 6400 2-71-97 Hyd. Hyd. 1900 to 5600 2-600-97 XR292HR-10 292 00 242 248.549.544 110 28THR7 28 0 227 241.51.498 107 HYDRAULIC ROLLER Mutha Thumpr High performance street/strip, needs 9:1 compression 2500+ stall, intake, gears and headers, rough idle. Hyd. Hyd. 2200 to 5900 2-601-97 291THR7 291 11 25 249.522.508 107 HYDRAULIC ROLLER Big Mutha Thumpr Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle. Hyd. Hyd. 2500 to 6200 2-602-97 299THR7 299 19 24 257.52.519 107 Mechanical Flat Tappet Camshafts RPM CAMSHAFT CAM DURATION LIFT LOBE TING OPERATING PART GRIND ADVERTISED @.050" W/ 1.5 SEP. SOLID Good with stock converter. Near smooth idle in 440. Works good with 650-750 CFM carb. Excellent torque..022.022 2000 to 5500 21-246-4 270S 270 270 224 224.468.468 110 SOLID Excellent for street/strip. 8 needs 2800 stall. 440 use 2400 stall, 700-800 CFM carb and headers..022.022 2500 to 5800 21-247-4 282S 282 282 26 26.495.495 110 SOLID Max street 8. 500 converter. 10:1 compression. 750 CFM up and headers. 000+ stall for 440, 800 CFM,.91-4.0 gear..022.022 000 to 6200 21-248-428 294S 294 294 250 250.525.525 110 SOLID Serious street/strip effort for 440. 500 converter. 10.5:1+ compression. 800-850 CFM. 8 requires 4000+ converter..022.022 500 to 6500 21-249-428 06S 06 06 262 262.555.555 110 46 WWW.COMPCAMS.COM Except as noted, not legal for sale or use on pollution-controlled motor vehicles
KITS & COMPONENTS LIFTERS TIMING 125 125KT 125 125KT 125 125KT 125 125KT 125 125KT 125 125KT 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 CHRYSLER 8-440 C.I. 8 CYL. 1959-1980 Retro-Fit Hydraulic Roller Camshafts RETAINERS LASH CAPS REV. KIT 627-16 26 622-16 627-16 26 622-16 627-16 26 622-16 627-16 26 622-16 Retro-Fit Hydraulic Roller Camshafts XTREME energy DIST. GEAR STUD GIRDLES THUMPR 627-16 26 622-16 627-16 26 622-16 CHRYSLER/DODGE/PLYMOUTH 125 125KT 1621-16 2 1071-KIT 2 627-16 26 622-16 Mechanical Flat Tappet Camshafts K21-246-4 SK21-246-4 7 CL21-246-4 7 801-16 76 104 1621-16 2 K21-247-4 SK21-247-4 7 CL21-247-4 7 801-16 76 104 1621-16 2 K21-248-4 SK21-248-4 7 CL21-248-4 7 801-16 76 104 1621-16 2 627-1626 K21-249-4 SK21-249-4 7 CL21-249-4 7 801-16 76 104 1621-16 2 1071-KIT 2 627-1626 Footnotes: Master Footnote Index on page 15. 2 Requires machining on cylinder heads 7 Stock springs cannot be used 2 Includes special shafts & spacers 26 1/2 set 2 groove; 1/2 set 4 groove 28 -bolt core available. Change first 2 digits of part # to 2. RED NUMBERS ARE THE PREMIUM CHOICE 76 Oils through pushrods 1.800.999.085 47
CAMSHAFTS CAMSHAFTS CHRYSLER 8-440 C.I. 8 CYL. 1959-1980 XTREME energy Mechanical Flat Tappet Camshafts (WITH 1.5 S) SOLID Excellent for street and mild strip, 2200+ stall or 4 speed. SOLID Serious street/strip, 9.5:1 compression with 2800+ stall. Strong mid-range. RPM CAMSHAFT CAM DURATION LIFT LOBE TING OPERATING PART GRIND ADVERTISED @.050" W/ 1.5 SEP..016.018 1800 to 5800 21-20-428.016.018 2200 to 6200 21-21-428 XS268S 268 274 20 26.488.501 110 XS274S 274 280 26 242.502.511 110 SOLID Very strong mid and upper rpm power. 10:1 compression with 000+ stall..016.018 2500 to 6500 21-22-428 XS282S 282 290 244 252.520.540 110 SOLID Max effort street/bracket race cam. 10.5:1 compression, 500+ stall and low gears..016.018 200 to 7000 21-2-428 XS290S 290 298 252 260.540.558 110 DRAG RACE Mechanical Flat Tappet Camshafts RPM CAMSHAFT CAM DURATION LIFT LOBE TING OPERATING PART GRIND ADVERTISED @.050" W/ 1.5 SEP. SOLID Good bracket cam. 10.5:1+ compression, 500+ stall in 440, 800+ in 8..018.020 500 to 6500 2-61-5 XTQ286S-8 286 296 256 266.550.570 108 SOLID Best with 11:1 compression in 8 with 4500+ stall, 4200+ stall with 440. Strong mid-range..018.020 800 to 6800 2-62-5 XTQ294S-8 294 299 264 270.567.579 108 SOLID Good Super Street, Super Gas or bracket cam. Best with 12:1 compression in 440 with 5000+ stall or 5500+ stall in 8..018.020 4500 to 7200 2-6-5 TL04S-8 02 11 274 282.590.609 108 SOLID Great Super Street, Super Gas or bracket cam. Best in 470+ engines with 12:1 compression and 5500+ stall..020.022 5000 to 7500 2-64-5 MM 05S-10 05 20 279 287.650.60 110 SOLID 440 with 5500+ stall, 5.1 gear, 11:1+ compression, 850+ CFM carb..028.00 5000 to 7500 2-60-5 24A-8 24 24 290 290.650.650 108 Mechanical Roller Camshafts RPM CAMSHAFT CAM DURATION LIFT LOBE TING OPERATING PART GRIND ADVERTISED @.050" W/ 1.5 SEP. MECHANICAL ROLLER Great all around power in 8 and 400. 750-80 CFM carb. 500+ converter in 8. 000+ in 440. Super torque and driveability, 4.10-4.56 gear..020.020 000 to 6200 2-741-95 288R-10 288 288 24 24.550.550 110 MECHANICAL ROLLER Max street effort. 8 requires 4000+ converter. 750-80 CFM. 4.0-4.88 gear. 440 needs 500+ converter. 800-850 CFM carb, headers. 4.10-4.56 gear..020.020 500 to 6500 2-742-95 08R-10 08 08 262 262.575.575 110 48 WWW.CAMHELP.COM Except as noted, not legal for sale or use on pollution-controlled motor vehicles
KITS & COMPONENTS K21-20-4 CL21-20-4 7 K21-21-4 CL21-21-4 7 K21-22-4 CL21-22-4 7 K21-2-4 CL21-2-4 7 LIFTERS TIMING 125 801-16 76 125KT 801-16 76 125 125KT 1621-16 2 1071-KIT 2 172-16 72-16 CHRYSLER 8-440 C.I. 8 CYL. 1959-1980 Mechanical Flat Tappet Camshafts (WITH 1.5 S) 801-16 76 104 801-16 76 104 801-16 76 104 801-16 76 104 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 RETAINERS 627-16 26 622-16 1621-16 2 1071-KIT 2 72-16 627-16 26 622-16 LASH CAPS Mechanical Flat Tappet Camshafts XTREME energy REV. KIT DIST. GEARS 924-16 627-1626 924-16 627-1626 924-16 627-1626 DRAG RACE STUD GIRDLES CHRYSLER/DODGE/PLYMOUTH 801-16 76 125 125KT 1621-16 2 1071-KIT 2 72-16 627-16 26 622-16 801-16 76 125 125KT 801-16 76 125 125KT 1621-16 2 1071-KIT 2 72-16 627-16 26 622-16 1621-16 2 1071-KIT 2 72-16 627-16 26 622-16 Mechanical Roller Camshafts K2-741-9 SK2-741-9 7 CL2-741-9 7 125 1621-16 2 1071-KIT 2 929-16 2 98-16 2 749-16 78-16 627-1626 K2-742-9 SK2-742-9 7 CL2-742-9 7 125 1621-16 2 1071-KIT 2 929-16 2 98-16 2 749-16 78-16 627-1626 Footnotes: Master Footnote Index on page 15. 2 Requires machining on cylinder heads 5 Requires distributor gear upgrade 7 Stock springs cannot be used 2 Includes special shafts & spacers 26 1/2 set 2 groove; 1/2 set 4 groove 28 -bolt core available. Change first 2 digits of part # to 2. 76 Oils through pushrods RED NUMBERS ARE THE PREMIUM CHOICE 1.800.999.085 49
CAMSHAFTS CAMSHAFTS CHRYSLER 8-440 C.I. 8 CYL. 1959-1980 XTREME energy Mechanical Street Roller Camshafts MECHANICAL ROLLER Best all around street roller. 9.5:1 compression with 2500+ stall. MECHANICAL ROLLER 9.5:1 with 000+ stall. Strong mid-range with a lopey idle. RPM CAMSHAFT CAM DURATION LIFT LOBE TING OPERATING PART GRIND ADVERTISED @.050" W/ 1.5 SEP..016.018 2000 to 6000 2-700-95.016.018 2500 to 6200 2-701-95 XR274R 274 280 26 242.564.570 110 XR280R 280 286 242 248.570.576 110 MECHANICAL ROLLER Serious street/strip effort, 10:1 compression with 200+ stall..016.018 000 to 6500 2-702-95 XR286R 286 292 248 254.576.582 110 MECHANICAL ROLLER Strong mid to upper rpm power, 10.5:1 compression with 500+ stall. Radical idle..016.018 500 to 6600 2-70-95 XR292R 292 297 254 260.582.588 110 DRAG RACE Mechanical Roller Camshafts RPM CAMSHAFT CAM DURATION LIFT LOBE TING OPERATING PART GRIND ADVERTISED @.050" W/ 1.5 SEP. MECHANICAL ROLLER Super strong low end torque. Best with 10.5:1 compression and single plane intake. 500+ stall in 440, 800 in 8..026.028 500 to 600 2-705-95 28R-8 28 291 252 26.660.660 108 MECHANICAL ROLLER Best all around bracket or Super Street cam. Best in light to medium weight car with 11:1 compression, 4200+ stall in 440, 4500+ stall in 8..026.028 4000 to 6500 2-706-95 RX296R-8 296 0 26 270.650.651 108 MECHANICAL ROLLER 8 Super Gas, Super Street, 12:1+ compression, 5000+ stall..028.00 4000 to 7000 2-758-95 06BR-8 06 06 27 27.625.625 108 MECHANICAL ROLLER Good Super Gas, Super Street with 12:1 compression and 850+ CFM carb. 5000+ stall with 440, 5400+ with 8..026.028 4500 to 7000 2-707-95 RX08R-8 08 15 275 282.657.659 108 MECHANICAL ROLLER Quick 16, Super Comp for medium to large cubic inch..026.028 5500 to 7800 2-704-95 REV15R-6 15 21 282 288.69.665 106 MECHANICAL ROLLER Fast Bracket, Super Gas or Super Comp. Best with 12.5:1 compression and ported iron or aftermarket heads. 5500+ stall in 440..026.028 4800 to 7200 2-708-95 RX16R-8 16 21 28 288.660.66 108 MECHANICAL ROLLER Super Gas, Super Comp, Fast Brackets. 5000+ stall..028.00 5000 to 7200 2-72-95 20TR-8 20 20 288 288.692.692 108 MECHANICAL ROLLER Super Quick, Super Gas, Super Comp or Fast Brackets. For use in medium to large engines with aftermarket heads. 12.5:1 compression with 5500-6000 stall..026.028 5500 to 7500 2-709-95 RX22R-10 18 0 285 292.705.705 110 MECHANICAL ROLLER Super Gas, Super Street, 12:1 compression, 5000+ stall, 5.1 gear..028.00 5000 to 7200 2-770-95 2BR-8 2 2 289 289.690.690 108 50 WWW.COMPCAMS.COM Except as noted, not legal for sale or use on pollution-controlled motor vehicles
KITS & COMPONENTS K2-700-9 SK2-700-9 7 CL2-700-9 K2-701-9 SK2-701-9 7 CL2-701-9 K2-702-9 SK2-702-9 7 CL2-702-9 K2-70-9 SK2-70-9 7 CL2-70-9 LIFTERS TIMING 125 125KT CHRYSLER 8-440 C.I. 8 CYL. 1959-1980 Mechanical Street Roller Camshafts 125 125 125 125 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 1621-16 2 1071-KIT 2 RETAINERS 1071-KIT 2 94-16 2 71-16 627-16 26 622-16 424 LASH CAPS REV. KIT DIST. GEAR 95-16 98-16 2 741-16 1741-16 627-1626 95-16 98-16 2 741-16 1741-16 627-1626 95-16 98-16 2 741-16 1741-16 627-1626 95-16 98-16 2 741-16 1741-16 627-1626 Mechanical Roller Camshafts XTREME energy DRAG RACE STUD GIRDLES CHRYSLER/DODGE/PLYMOUTH 125 125KT 1071-KIT 2 94-16 2 71-16 627-16 26 622-16 424 125 125KT 1071-KIT 2 94-16 2 71-16 627-16 26 622-16 424 125 125KT 1071-KIT 2 94-16 2 71-16 627-16 26 622-16 424 125 125KT 1071-KIT 2 107-KIT 2 947-16 2 26082-16 2 79-16 722-16 627-16 26 612-16 512-16 2 622-16 424 125 125KT 1071-KIT 2 94-16 2 71-16 627-16 26 622-16 424 125 125KT 1071-KIT 2 94-16 2 71-16 627-16 26 622-16 424 125 125KT 1071-KIT 2 107-KIT 2 947-16 2 26082-16 2 79-16 722-16 627-16 26 612-16 512-16 2 622-16 424 125 125KT 1071-KIT 2 94-16 2 71-16 627-16 26 622-16 424 Footnotes: Master Footnote Index on page 15. 2 Requires machining on cylinder heads 5 Requires distributor gear upgrade. 7 Stock springs cannot be used 2 Includes special shafts & spacers 26 1/2 set 2 groove; 1/2 set 4 groove RED NUMBERS ARE THE PREMIUM CHOICE 1.800.999.085 51