BSI Seating Pricelist August 2010 Ergonomic Stacking/Classroom Quick Ship Lounge/Side Institutional State Office Furniture Contract Holder - Private Office
Seating TABLE OF CONTENTS Section/Product Page Light Duty Ergonomic Seating Sapphire 2 Snap 4 Ergonomic Seating 1860 8 2600 12 Breathe 16 CXO & CXO-HD 20 Euro 24 Ithaca 28 Ithaca Ultra 32 LXO 36 Pride (Engage), Pride247 38 San Marco 42 Sterling 2 44 Heavy Duty Ergonomic Seating Pilot 50 247-HD 52 Lounge/Side Seating Advise 54 Alta 56 Cricket 68 CXO 20 Ithaca 28 Ithaca Ultra 32 Soft Seating/Lounge (Danforth & Sorrento) 70 Navigator 72 Revelation 76 Scandinavian 82 Sterling 2 44 Sophic 86 Stacking/Classroom Seating 1060 88 Cheyenne 92 Dakota 100 Piper 108 Solitude 112 Ultralite 118 Versa Conference 120 Institutional Utility 122 Stools Snap 4 Ithaca 28 Ithaca Ultra 32 Pride (Engage) 38 Sterling 2 44 Revelation 76 Quick Ship Seating Pride (Engage) 126 Colors Stain 128 Frame 128 Poly 129 Warranty Information 130 Glide Guide 131 Seating at a Glance 132 Ordering Instructions 133 Yardage Chart 135 1
Sapphire Specifications LIGHT DUTY ERGONOMIC SEATING Sapphire 1 Seat Height Adjustment Lever Seat Height Adjustment Lever to adjust seat height, lift lever on right hand side and position seat to desired height. To lower, lift lever while seat is occupied.to raise, lift lever while seat is unoccupied. Seat Width Seat Depth Back Width Back Height Seat Height (from floor) Height (from floor) Horizontal Width w/ Adjustable Arms Vertical Width w/ Adjustable Arms Width Between Arms 20 1 /2 19 3 /4 19 14 1 /2 16-21 32-39 18 1 /2-20 7 1 /2-10 19 3 /4 Usage Single 8 Hour Shift Weight Limit 200 lbs. Seat Seat measures 20-1/2 wide by 19 deep. Upholstered seat, pneumatically adjustable from 16 to 20-1/2. Seat features an injection- molded glass-reinforced polypropylene seat board with 2 polyurethane foam padding. Back Back measures 18-1/2 wide by 16-1/4 tall. Backboard is injection-molded polypropylene with 12 of pivot and 2 of polyurethane foam. The back shroud is injection-molded polypropylene with an optional upholstered shroud available. Fixed Arms Tubular steel arm supports with self-skinning urethane armrests measuring 10-1/4 long by 4 wide. Adjustable Arms Injection-molded plastic with a flat steel upright, and self-skinning urethane armrests. Each arm has 1 of horizontal adjustment, (2 arm width adjustment range per chair) and 2-1/4 of vertical adjustment. Base Injection-molded glass-reinforced nylon five blade base. 24 base on the task chair. Casters 50mm diameter double-wheel injection-molded nylon casters. Carpet casters are monochromatic with the base. Hard floor casters are available in black only. 2
LIGHT DUTY ERGONOMIC SEATING Sapphire MODEL NUMBER Basic Model Arms Casters Color List Price Soft Casters (SC) Level 1 SAP1 NA $342 $25 SAP1 CA 401 SAP1 AA 450 l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select arm option. NA = No Arm CA = Cantilever Arm AA = Adjustable Arms C D Select caster option. CC = Carpet Casters SC = Soft Casters Add $25 Select frame color. BL = Black Select upholstery fabric. Cards are available online and by request. SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 3
Snap Specifications LIGHT DUTY ERGONOMIC SEATING Seat Width Seat Depth Back Width Back Height Seat Height Overall Height Overall Width Usage Weight Limit SNAP 18 18 17 15 16 1 /2-21 1 /2 33-41 24 SNAP4 19 19 19 17 1 /2 16 1 /2-21 1 /2 35-43 24 SNAP47 19 19 19 17 1 /2 23-33 42-55 25 SNAP48S 19 19 19 17 1 /2 18 37-39 20 Single 8 Hour Shift Single 8 Hour Shift Single 8 Hour Shift Single 8 Hour Shift 200 lbs 200 lbs 200 lbs 200 lbs Seat (SNAP) The size of the seat is 18 wide by 18 deep. The seat is constructed of a 1/2 thick, formed plywood seat board with 2 molded foam. The foam covered seat board is upholstered with fabric. The entire seat assembly is mounted to the mechanism by 6 screws. A textured black plastic shroud attaches to the bottom of the seat. Model SNAP42 has an integral seat depth adjustment knob is attached to the underside of the mechanism, which allows the seat depth to be adjusted from 18 to 20. On model SNAP44, the seat depth cannot be adjusted. Seat (SNAP4, SNAP47, SNAP48S) The size of the seat is 19 wide by 19 deep. The seat is constructed of a 1/2 thick, formed plywood seat board with 2 molded foam. The foam covered seat board is upholstered with fabric. The entire seat assembly is mounted to the mechanism by 6 screws. A textured black plastic shroud attaches to the bottom of the seat. Models SNAP4 and SNAP48S, have an integral seat depth adjustment knob is attached to the underside of the mechanism, which allows the seat depth to be adjusted from 19 to 21. On model SNAP48, the seat depth cannot be adjusted. Backrest (SNAP42 and SNAP44) The size of the backrest is 17 wide by 15 high. The backrest has the same basic construction as the seat. In addition, the backrest is mounted onto a pivot joint at one end of the upright that provides the pivot function of the backrest. The height of the backrest can be adjusted in a 3 range by a height adjustment knob. Backrest (SNAP46, SNAP47, SNAP48 and SNAP48S) The size of the backrest is 19 wide by 17-1/2 high. The backrest has the same basic construction as the seat. The back also includes an adjustment knob that allows the backrest to be raised or lowered 3 vertically along the J-bar; SNAP48 has a 3-1/2 range. In addition, the backrest is mounted onto a pivot joint providing pivot function of the backrest. T-Nut All the T-nuts used in the plywood are rivet type to prevent their popping-off from the plywood. Mechanism (SNAP42, SNAP46, and SNAP47) A stamped and welded steel housing forms a sturdy cradle for the seat. A lever actuates the pneumatic cylinder, which adjusts the seat height from 16-1/2 to 21-1/2 with infinite selection within the range; SNAP47 s range is 23 to 33. Mechanism (SNAP44) A stamped and welded steel housing forms a sturdy cradle for the seat. A lever actuates the pneumatic cylinder, which adjusts the seat height from 16-1/2 to 21-1/2 with infinite selection within the range. Another lever controls the tilting angles of both the seat and the back. Two sets of brake plates independently hold the seat and back at desired angles when the lever is released. The seat has 10 of angle adjustment. The back has 20 of angle adjustment. 4
LIGHT DUTY ERGONOMIC SEATING Snap Specifications Seat Height Adjustment Lever Simply pull the seat lever up, toward seat, to activate seat height mechanism. To lower the seat, pull up on lever while sitting. To raise height, you should sit up, slightly out of the chair, while lifting lever. Release lever to lock in place. Simple Function Seat Depth Adjustment The handwheel located on the underside of the back support allows the back to be adjusted horizontally. With handwheel loosened, back can be slid forward or backward to change seat depth. Use care to make sure handwheel is tightened to avoid injury. Back and Seat Angle Adjustment Grasp lever under right side of seat and pull up to adjust back and seat angle. Shift weight on seat and pressure on back to desired position. Release lever to lock. Back Height Adjustment Loosen handwheel located on lower portion of back support. Slide back support up or down to individual preference. Tighten handwheel to hold in place. Use care to make sure handwheel is tightened to avoid injury. Advanced Function Arm Adjustment Arms can be adjusted vertically. Press the buttons at the sides of the arms and move the arms up or down as desired. For horizontal adjustment, loosen handwheels under either side of seat and slide arms in or out. Mechanism (SNAP48) A stamped and welded steel housing forms a sturdy cradle for the seat. There are three control levers. One lever actuates the pneumatic cylinder, which adjusts the seat height from 16-1/2 to 21-1/2 with infinite selection within the range. One lever adjusts the tilting angle of the seat, or sets the seat in free-floating mode. One lever adjusts the tilting angle of the back, or sets the back in free-floating mode. The seat has 10 of angle adjustment. The back has 20 of angle adjustment. Hardware All the hardware is metric threaded. Screws and bolts are treated with self-locking material to prevent their backing-out. Base (SNAP42, SNAP44, SNAP46 and SNAP48) The 24 diameter, five-blade black base is molded from reinforced nylon. A telescoping cylinder shroud conceals pneumatic cylinder. Base (SNAP47) The 25 diameter, five-blade black base is made of steel tubing with decorative plastic cover on top. A telescoping cylinder shroud conceals the pneumatic cylinder. Base (SNAP48S) The sled base is formed from 1-1/8 diameter, 2.2mm thickness steel tubing with black powder coat finish. Long stem front glides are standard. Footring The 20 black, reinforced nylon footring can be set at proper height by tightening a knob. Chrome finish, steel tube footring optional. Carpet Casters The double 50mm diameter black wheels are molded of high-impact thermoplastic and are housed in a high-impact plastic frame. Carpet and hard floor casters are available. Loop Arm 1-1/4 each side width adjustable arms. T-Arm 1-1/4 each side width and 2-1/2 height adjustable T- arms. 5
Snap LIGHT DUTY ERGONOMIC SEATING MODEL NUMBER Basic Model Function Arms Color Casters Footring Midback SNAP4 2 BL SNAP4 4 BL Highback SNAP4 6 BL SNAP4 8 BL Highback Side Chair SNAP48S BL Highback Stool SNAP47 BL BL SNAP47 BL CH l l l l l l A B C D E F HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select function type. 2 = Simple 4 = Advanced 6 = Simple 8 = Advanced C Select arm option. XA = No Arm LA = Loop Arm TA = T-Arm F Select footring option. BL = Black Plastic CH = Steel Tube Chrome Select upholstery fabric. Cards are available online and by request. D E Select frame color. BL = Black Select caster option. CC = Carpet Casters SC = Soft Casters Add $25 6
LIGHT DUTY ERGONOMIC SEATING Snap LIST PRICES Arms No Arms Loop Arms T-Arms Soft Casters (SC) $310 $347 $352 $25 339 376 381 25 333 370 375 25 362 399 404 25 317 354 359 371 408 413 25 392 429 434 25 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 7
1860 Specifications ERGONOMIC SEATING Overall Outside Width 24 Overall Outside Depth 26-28 Overall Outside Height 42-50 Outside Arm Height 25 1 /2-33 Inside Seat Width 20 Inside Seat Depth 18-20 Seat Height 18-23 Inside Back Width 20 1 /4 Inside Arm Height 7 1 /2-10 Five Star Base 27 Usage Weight Limit Single 8 Hour Shift 250 lbs. Adjustable Arms Adjustable arms allow the user to independently adjust arm height 2" and width 2" for maximum support and comfort. Mechanism Synchro-tilt mechanism, 2:1 ratio. Infinite position tilt lock, 2" seat depth adjustment, ratchet back height adjustment, 5-1/2" pneumatic height adjustment, tension control, passive seat tilt and a 6 degree forward tilt. Lumbar Support This chair features an internal lumbar back support that self adjusts to the user's back to provide incredible lateral support while offering excellent pelvic stability. Enersorb Foam Enersorb Foam is a unique foam composition that absorbs and conforms to the weight and shape of the user, dramatically reducing the potential for sitting fatigue. 8
ERGONOMIC SEATING 1860 Specifications Ratchet back Height Adjustment Simply lift back to desired position and back locks automatically. Forward Tilt Lean back in chair and roll or pull lever back for forward tilt, push or roll lever forward for straight position. Pneumatic Height Adjustment To lower, lift paddle while seated. To raise, lift paddle with your weight off seat. Infinite Position Tilt Lock To lock chair in position, push paddle down, to allow free movement, pull paddle up. Seat Depth Adjustment Loosen hand wheel (do not remove) and slide back to desired position, then re-tighten hand wheel. 9
1860 ERGONOMIC SEATING MODEL NUMBER Highback Task Basic Model Arms Casters 1861H Highback Task - Larger Seat 1865H Midback Task 1860DH Lowback Task 1860H l l l A B C HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select arm option. A = Poly Teardrop P = Poly Teardrop Elongated SL = Poly Semi-Loop HL = Poly Full-Loop C Select caster option. CC = Carpet Casters SC = Soft Casters Add $10 Select upholstery fabric. Cards are available online and by request. 10
ERGONOMIC SEATING 1860 LIST PRICES Arms Poly Teardrop Poly Teardrop Elongated Poly Semi-Loop Poly Full-Loop Soft Casters (SC) $1190 $1201 $1238 $1242 $9 1185 1196 1233 1237 9 1150 1161 1198 1202 9 1125 1136 1173 1177 9 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 11
2600 Specifications ERGONOMIC SEATING 2600 2600D Overall Weight 25 1 /2 25 1 /2 2600 Overall Depth 26 1 /2 25 Overall Height 35-39 31-35 Seat Height 17 1 /22-21 1 /22 17 1 /2-21 1 /2 Weight 35 lbs 33 lbs Usage Single 8 Hour Shift Single 8 Hour Shift Weight Limit 250 lbs 250 lbs 2600D Standard Features: Swivel mechanism Manual seat height adjustment. Swivel mechanism Pneumatic height adjustment, seat depth adjustment. High density foam for support and durability. Softly curved seat and back for passive ergonomic support. Fully upholstered backs. Fixed height arms, upholstered arm pads. Swivel tilt mechanism Infinite position swivel tilt lock, back angle adjustment, pneumatic height adjustment, 6 forward tilt, back height adjustment, tension control. Height adjustable arm complete with tear drop arm pad Oval steel frame finished with gloss black high impact epoxy powder coat electrostatically applied for corrosion resistance. 5 prong heavy duty nylon base. 2 dual wheel carpet casters. Finish - mechanism, base, arms, casters and trim standard in black. 12
ERGONOMIC SEATING 2600 Specifications Ratchet back Height Adjustment Simply lift back to desired position and back locks automatically. Forward Tilt Lean back in chair and roll or pull lever back for forward tilt, push or roll lever forward for straight position. Pneumatic Height Adjustment To lower, lift paddle while seated. To raise, lift paddle with your weight off seat. Infinite Position Tilt Lock To lock chair in position, push paddle down, to allow free movement, pull paddle up. Seat Depth Adjustment Loosen hand wheel (do not remove) and slide back to desired position, then re-tighten hand wheel. Adjustable Arms Adjustable arms allow the user to independently adjust arm height 2" and width 2" for maximum support and comfort. 13
2600 ERGONOMIC SEATING MODEL NUMBER Midback Task Basic Model Arms Casters 2600D Lowback Task 2600 l l l A B C HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select arm option. A = Poly Teardrop P = Poly Teardrop Elongated C Select caster option. CC = Carpet Casters SC = Soft Casters Add $25 Select upholstery fabric. Cards are available online and by request. 14
ERGONOMIC SEATING 2600 LIST PRICES Arms Poly Teardrop Poly Teardrop Elongated Soft Casters (SC) $825 $835 $10 650 660 10 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 15
Breathe Specifications ERGONOMIC SEATING Seat Height/Seat Range 18-21 Seat Width 21 5 /8 Seat Depth 19 1 /2 Back Width 22 5 /8 Inside Arm Distance 23 1 /2 Arm Adjustment Range 6-8 3 /4 Back Height 24 Overall Width 22 3 /4 or 27 12 /25 Overall Depth 25 Overall Height Usage Weight Limit 44 max. Single 8 Hour Shift 250 lbs. Arms Height adjustable with a soft, contoured lack arm pad of polypropylene. Adjustment range is 2-3/4. Seat Polyurethane foam (3 ) over a 9/16 plywood upholstery board. Fabric is always black. Casters Black, dual wheel nylon carpet casters are standard. Base Powder coated, cast aluminum base (black) with built- Control Mechanism Knee tilt mechanism (approximate 2:1 back to seat ratio) with a five position back lock. Tilt tension knob to adjust back flex. Pneumatic seal height adjustment with a 3 range. Seat reclines 16 degrees; back, 26 degrees. Back Mesh back (black) is surrounded by a reinforced polypropylene frame. Adjustable lumbar support with a 4 range. Lumbar support has a depth of 1-1/2. 16
ERGONOMIC SEATING Breathe Specifications Mesh Back The mesh back design provides comfort, breathability and durability all surrounded by a reinforced backs structure. Lumbar Support Built in to the sturdy back construction, the back lumbar support offers additional comfort with a 4 vertical adjustment range. Knee Tilt Breathe offers a synchronized knee-tilt mechanism with 2:1 back-to-seat ratio Seat Height Adjustment The heavy-duty gas lift cylinder allows for a smooth seat height adjustment Base Die cast aluminum base offers built-in anti-slip/cuff protector. Durable dual wheel carpet casters allow Breathe to move with ease. Tension Knob Tilt tension knob easily adjusts back tension. Tilt Lock Positional lock lever will lock chair in 5 different positions throughout the tilt range. Seat Soft, contoured seat provides maximum comfort. With either mesh fabric, or your choice of fabric on the seat (and headrest option) Adjustable Arms Polypropylene adjustable arm provide six separate adjustments throughout a 2.75 range. Soft, contoured arm pads offer comfort for the user. 17
Breathe ERGONOMIC SEATING MODEL NUMBER Ergonomic Basic Model Arms Headrest Casters BRE Sled Base Side Chair BRE-SLED l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select arm option. XA = No Arms AA = Adjustable Arms C D Select headrest option. XH = No Headrest HR = Headrest Select caster option. CC = Carpet Casters Select upholstery fabric. Cards are available online and by request. 18
ERGONOMIC SEATING Breathe LIST PRICES Arms/Headrest No Arms No Headrest No Arms Headrest Adj. Arms No Headrest Adj. Arms Headrest $606 $710 $664 $768 463 567 521 625 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 19
CXO Specifications ERGONOMIC SEATING Overall Width Overall Depth Overall Height CXO w/headrest CXO Midback CXO2 CXO-HD w/headrest CXO-HD 27-29 1 /2 27-29 1 /2 27 27-29 1 /2 27-29 1 /2 27-29 1 /2 27-29 1 /2 27 27-29 1 /2 27-29 1 /2 47 1 /2-55 36 1 /2-41 38 47 1 /2-55 36 1 /2-41 Back Height 29 1 /2 22 22 29 1 /2 22 Seat Height 16-21 16-21 17 1 /2 16-21 16-21 Back Width 22 22 22 22 22 Seat Depth 19-21 1 /2 19-21 1 /2 20 19-21 1 /2 19-21 1 /2 Seat Width 20 20 20 20 20 Weight 70 67 55 70 67 Volume 19 17 17 19 17 Usage Weight Limit Single 8 Hour Shift Single 8 Hour Shift Single 8 Hour Shift 24/7 24/7 300 lbs 300 lbs 300 lbs 450 lbs 450 lbs LUMBAR SUPPORT The contoured CXO lumbar pad can be easily adjusted up and down and in and out for personalized lumbar support and comfort. MOVEABLE COMPONENTS CXO s Enersorb foam (found in the seating surface, lumbar support and optional headrest) conforms to your body when you sit and reverts to its natural form when you get up. MESH BACKING Like CXO s fabric, the mesh backing allows air to pass freely, making it comfortable in all climates. It also boasts dynamic movement in other words, it moves with you. ENERSORB FOAM CXO s Enersorb foam (found in the seating surface, lumbar support and optional headrest) conforms to your body when you sit and reverts to its natural form when you get up. FOUR-WAY STRETCH FABRIC CXO s dual-layer fabric is perforated for exceptional airflow. It also has a four-way stretch, which moves perfectly with the Enersorb foam for added comfort and durability 20
ERGONOMIC SEATING CXO Specifications Mesh Back The mesh back design provides comfort, breathability and durability. Lumbar Support Moves up/down and in/out Synchronous Knee Tilt CXO offers a synchronized knee-tilt mechanism. Seat Height Adjustment The heavy-duty gas lift cylinder allows for a smooth seat height adjustment Tension Knob Tilt tension knob easily adjusts back tension. Headrest Adjusts up/down and has a coat hook. Seat Slider Has an integrated seat slider for depth adjustments. Armrests Move up/down, in/out, complete with lockable swivel pads. 21
CXO ERGONOMIC SEATING MODEL NUMBER Extreme Comfort Chair Basic Model Headrest Base Casters CXO CXO-HD Extreme Comfort Guest Chair CXO2 l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select headrest option. X = No Headrest H = Headrest C D Select base option. BL =Black Plastic AL = Aluminum Select caster option. CC = Carpet Casters SC = Soft Casters Add $38/$100 Select upholstery fabric. Cards are available online and by request. CXO Fabric Options C1 Black C2 Dark Gray C3 Burgundy C4 Blue C5 Gold C6 Red C7 Yellow C8 Hunter Green C9 Navy 22
ERGONOMIC SEATING CXO LIST PRICES Headrest/Base No Headrest Black Base No Headrest Aluminum Base Headrest Black Base Headrest Aluminum Base Soft Casters (SC) $1450 $1580 $1515 $1630 $38 1920 2000 100 1110 1240 1160 1290 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 23
Euro Specifications ERGONOMIC SEATING Euro Exec Euro Midback/Lowback Seat Height 16-20 1 /2 16-20 1 /2 Seat 18 1 /2d x 20 1 /2w 17 3 /4d x 19w Back 25 1 /2h x 20w 17h x 16 1 /2w or 21 x 17 1 /2 (upholstered) Base 25 dia 25 dia Usage Single 8 Hour Shift Single 8 Hour Shift Weight Limit 250 lbs. 250 lbs. HighBack Multitasking with distinctive style, elegance and total ergonomic function featuring exclusive synchro kneetilt mechanism! Features: w Molded outer back w Standard seat depth adjustment w Back height adjustment w Arm height and width adjustment with the touch of a button w Lumbar support w 25" base w Waterfall seat w Exclusive synchro-knee tilt control w Synchronous seat & back movement w Features of a knee tilt with lockout w Adjustable tension and 3-position at rest angle adjustment Midback/Lowback Full ergonomic function with only two levers. Features: w Seat and back tilt independently, following and supporting every move, including forward tilt w Seat and back can be locked in any position with just a single lever w Standard seat depth adjustment w Back height adjustment w Arm height and width adjustment with the touch of a button 24
ERGONOMIC SEATING Euro Specifications Synchro-Knee Tilt Features a knee tilt with lockout, synchronous seat and back movement Seat Depth Adjustment Adjusts seat depth to fit individual user Back Height Adjustment Adjust the back height by pulling a lever in either a seated or standing position, simply raise or lower the back to the desired height. Seat Height Adjustment The heavy-duty gas lift cylinder allows for a smooth seat height adjustment Lumbar Support Built-in lumbar support Tension Knob Tilt tension knob easily adjusts back tension. Adjustable Arms Arm height and width adjust with the touch of a button 25
Euro ERGONOMIC SEATING MODEL NUMBER Basic Model Upholstery Lumbar Arms Casters Highback Executive EUR-EXE P EUR-EXE U Midback EUR-MID P EUR-MID U Lowback EUR-LOW P EURO-LOW U l l l l A B C D E HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select upholstery option. P = Poly Back U = Upholstered Back C D Select lumbar option. X = No Lumbar L = Lumbar Select arm option. CT = Corona T Arms BR = Breakaway Arms VC = Vista C Arms E Select caster option. CC = Carpet Casters SC = Soft Casters Add $25 Select upholstery fabric. Cards are available online and by request. 26
ERGONOMIC SEATING Euro LIST PRICES Lumbar Support/Arms No Lumbar Corona T Arms No Lumbar Corona T Breakaway Arms No Lumbar Vista C Arms Lumbar Corona T Arms Lumbar Corona T Breakaway Arms Lumbar Vista C Arms $1095 $1130 $1146 $1162 $1197 $1213 $14 1117 1152 1168 1184 1219 1235 14 Soft Casters (SC) 1060 1095 1111 1127 1162 1178 $14 1082 1117 1133 1149 1184 1200 14 1025 1076 1092 1143 $14 1047 1098 1114 1165 14 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 27
Ithaca Specifications ERGONOMIC SEATING Task Chair Sled Base Stool Seat Width 20 1 /2 20 1 /2 20 1 /2 Seat Depth 18 18 18 Seat Height 17 1 /4-22 1 /4 18 24-34 Back Width 20 20 20 Back Height (above seat) 19 1 /2-22 1 /2 21 21 Overall Height 37-45 38 1 /2 43 1 /2-56 1 /2 Overall Width 25 24 25 Usage Single 8 Hour Shift Single 8 Hour Shift Single 8 Hour Shift Weight Limit 250 lbs. 250 lbs. 250 lbs. Mechanism A stamped steel dual housing forms a sturdy cradle for the seat. There are two control levers. One lever actuates the pneumatic cylinder, which adjusts the seat height from 17-1/4 to 22-1/4 with infinite selection within the range. One lever locks the chair at 3-positions or actuates the free-floating mode. The synchronized 2:1 free floating mode has adjustments of 8 on seat and 16 on back. Backrest The injection molded plastic board has embedded inserts for mounting. The board is covered with contoured molded high-resilient foam and upholstered with fabric. A textured black shroud covers the rear side. An easy to operate mechanism is installed on the back board for adjusting the back height (3 ). Seat Constructed of a 1/2 thick, saddle shape plywood with 2-1/2 molded high-resilient foam and upholstered with fabric. The entire seat assembly is mounted to the mechanism by four screws. Pedestal Base The 25 diameter, five-blade base is made of reinforced nylon. Black only. Carpet Casters The double 55mm diameter black wheels are molded of high-impact thermoplastic and are housed in a high impact frame. Hard floor casters are available. Adjustable Loop Arm Option Height adjustment of 2-1/2 and width adjustment of 1 per side. Adjustable T-Arm Option Height adjustment of 3 and width adjustment of 1-1/2 per side. Adjustable 360 Pivot Arm Molded urethane arm cap pivots 360 degrees and locks in place. arm cap is black. 3 of height adjustment and 3 of total width adjustment. Sled Base The sled base is formed from 1-1/8 diameter, 13- gauge thickness steel tubing. Black only. 28
ERGONOMIC SEATING Ithaca Specifications Adjustable Back Height Adjustable Back height offers tailored back support. Simply raise or lower the back to the desired height Tension Knob Tilt tension knob easily adjusts back tension. Seat Slider Ithaca can be ordered with an optional seat slider mechanism allowing seat depth adjustment to create the perfect fit for any user. Seat Height Adjustment The heavy-duty gas lift cylinder allows for a smooth seat height adjustment Synchronized Mechanism Ithaca s synchronized mechanism can be adjusted or locked by moving your back to the desired position, then pushing back on the back lock lever. release lever to stay in free float position. Adjustable Arms T-arms and loop arms are width and/or height Adjustable to fit any user s needs. Cushy Seat Ithaca s extremely cushy seat contours to fit your body. 29
Ithaca ERGONOMIC SEATING MODEL NUMBER Basic Model Arms Seat Slider Back Casters Free Float Task ITH X ITH S Sled Base Guest ITSB Stool ITST X ITST S l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select arm option. NA = Armless LA = Loop Arms AA = Adjustable Arms AL = Adjustable Loop Arms PA = Pivot Arms C Select seat slider option. X =No Seat Slider S = Seat Slider Add $53 Black frame only. D E Select back option. POL = Poly Back UPH = Upholstered Back Select caster option. CC = Carpet Casters SC = Soft Casters Add $25 Select upholstery fabric. Cards are available online and by request. 30
ERGONOMIC SEATING Ithaca LIST PRICES Arms/Back Armless Poly Back Loop Arms Poly Back Adj. Arms Poly Back Adj.Loop Arms Poly Back Pivot Arms Poly Back Armless Uph. Back Loop Arms Uph. Back Adj. Arms Uph. Back Adj. Loop Arms Uph. Back Pivot Arms Uph. Back $538 $588 $681 $681 $737 $588 $638 $731 $731 $787 $25 591 641 734 641 790 641 691 784 691 840 25 Soft Casters (SC) 489 439 439 489 652 702 795 795 851 702 752 845 845 901 25 705 735 848 848 904 755 785 989 989 954 25 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 31
Ithaca Ultra ERGONOMIC SEATING SPECIFICATIONS Task Chair Sled Base Seat Width 20 1 /2 20 1 /2 Seat Depth 18-20 1 /2 19 Seat Height 17-22 18 Overall Height 35-43 42 Overall Width 26 24 Usage Single 8 Hour Shift Single 8 Hour Shift Weight Limit 250 lbs. 250 lbs. Mechanism Synchronous tilt mechanism, (2:1 ratio) for highend comfort. Choose free-float or 3-position back lock-out. Pneumatic cylinder provides 5" of seat height adjustment. Backrest Soft, mesh back conforms to your back. Mesh is made of polyethylene elastomeric and polyester. Nylon with fiberglass reinforced back structure. Seat Soft, contoured seat foam comes standard. Memory foam is optional. Pliable, stretchy materials offer maximum comfort; or select other fabrics, including vinyl or leather. Seat depth slide is standard, for varying leg lengths. It s spring loaded offering serveral lock-out positions. Pedestal Base The 25 diameter, five-blade base is made of reinforced nylon. Black only. Carpet Casters The double 55mm diameter black wheels are molded of high-impact thermoplastic and are housed in a high impact frame. Hard floor casters are available. Adjustable Loop Arm Option Height adjustment of 2-1/2 and width adjustment of 1 per side. Adjustable T-Arm Option Height adjustment of 3 and width adjustment of 1-1/2 per side. Adjustable 360 Pivot Arm Molded urethane arm cap pivots 360 degrees and locks in place. arm cap is black. 3 of height adjustment and 3 of total width adjustment. Sled Base The sled base is formed from 1-1/8 diameter, 13- gauge thickness steel tubing. Black only. 32
ERGONOMIC SEATING SPECIFICATIONS Ithaca Ultra Adjustable Back Height High- and mid-back versions available (mid-back has height adjustment of 3"; high-back has no height adjustment) Tension Knob Tilt tension knob easily adjusts back tension. Seat Slider Seat depth slide is standard,for varying leg lengths.it s spring loaded offering serveral lock-out positions. Seat Height Adjustment Pneumatic cylinder provides 5" of seat height adjustment. Synchronized Mechanism Synchronous tilt mechanism (2:1 ratio) for high-end comfort. Choose free-float or 3-position back lock-out. Adjustable Arms 4 arm choices, including 360 pivoting arm cap.arm caps made of molded urethane. Cushy Seat Soft, contoured seat foam comes standard. Memory foam is optional. Pliable, stretchy materials offermaximum comfort; or select other fabrics, including vinyl or leather. 33
Ithaca Ultra ERGONOMIC SEATING SPECIFICATIONS MODEL NUMBER Basic Model Arms Headrest Back Casters Free Float Task ITHUL-HIGH-MF NR BL ITHUL-HIGH-MF HR BL ITHUL-HIGH-SF NR BL ITHUL-HIGH-SF HR BL ITHUL-MID-MF ITHUL-MID-SF BL BL Sled Base Guest ITHUL-GST-MF BL ITHUL-GST-SF BL Stool ITHUL-STL-MF BL ITHUL-STL-SF BL l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select arm option. NA = Armless LA = Loop Arms AA = Adjustable Arms AL = Adjustable Loop Arms PA = Pivot Arms C Select headrest option. NR =No Headrest HR = Headrest D E Select base option. BL = Black Select caster option. CC = Carpet Casters SC = Soft Casters Add $25 Select upholstery fabric. Cards are available online and by request. 34
ERGONOMIC SEATING SPECIFICATIONS Ithaca Ultra LIST PRICES Arms/Headrest No Arms Fixed Loop Arms Adj. Loop Arms Adj. T-Arms Pivot Arms Soft Casters (SC) $815 858 952 951 1007 $25 912 955 1049 1048 1104 25 674 717 811 810 674 771 814 908 907 771 772 815 909 908 964 631 674 768 767 823 572 615 709 432 475 569 772 815 909 908 964 25 631 674 768 767 823 25 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 35
LXO Specifications ERGONOMIC SEATING Overall Width 25 Overall Depth 24 Overall Height 35 1 /2-41 Seat Height 16-21 Weight (lbs) 50 Vol. (cu. ft) 14 Usage Single 8 Hour Shift Weight Limit 250 lbs. Features w Translucent Ablex patterned weave mesh back provides generous lumbar support while allowing dynamic back movement w Waterfall seat design w Synchronous knee-tilt mechanism with infinite position tilt-lock pneumatic height adjustment and tension control w Back depth adjustment allowing for greater seating depth for those requiring more leg support w Easy to use, height adjustable arms with intuitive finger tip trigger for individual comfort and support w The arms can be manually adjusted for horizontal width w Energy absorbing dual density Enersorb seat foam reduces sitting fatigue 36
ERGONOMIC SEATING LXO MODEL NUMBER Basic Model Casters List Price Soft Casters (SC) LXO LXO $880 $13 l A l B HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select caster option. CC = Carpet Casters SC = Soft Casters Add $25 Select upholstery fabric. Cards are available online and by request. LXO Fabric Options C1 Black C2 Dark Gray C3 Burgundy C4 Blue C5 Gold C6 Red C7 Yellow C8 Hunter Green C9 Navy SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 37
Pride (Engage) Specifications ERGONOMIC SEATING Pride Pride 247 Overall Width 26 or 28 26 or 28 Overall Depth 22 1 /2-25 1 /2 22 1 /2-25 1 /2 Overall Height 36 3 /8-41 1 /8 36 3 /8-41 1 /8 Back Height 16 3 /8-20 3 /8 16 3 /8-20 3 /8 Seat Height 18-21 18-21 Back Width 18 18 Seat Depth 16-19 16-19 Seat Width 18 3 /4 18 3 /4 Usage Single 8 Hour Shift 24/7 Weight Limit 250 lbs. Engage Seat Seat is constructed of a molded polypropylene seat board with foam molded directly onto it. The foamcovered board is upholstered with fabric. An integral seat slide button is attached to the underside of the board, which allows the seat depth to be adjusted from 16 to 19 for the chairs and 16 to 17-3/4 for the stool. A textured polypropylene seat shroud attaches to the bottom of the seat and permits access to the seat slide button. The entire assembly is mounted through slots in the mechanism that allow the seat to slide in and out. Engage Backrest The backrest has the same basic construction as the seat except the textured polypropylene shroud is also available in an upholstered version. The back also includes an adjustment lever that allows the back to be raised or lowered 4 vertically along the J-bar. Engage Synchronized Knee Tilt Mechanism A stamped and welded steel housing contains a set of torsion bars that supply the force to the mechanism. Controls include a back angle lock, tilt tension control and pneumatic seat height lever for both the chairs and the stool, but also a forward tilt lockout for the chairs. The seat is in a 2 reclined position. When the forward tilt lock is disengaged, the seat tilts to a 2 forward position. The back angle can be locked at three positions. The tension can be increased or decreased by turning the tension dial to set the desired amount of preset on the torsion springs. The seat height can be pneumatically adjusted from 16-20-3/4 on the chairs and 27-1/2 to 32-1/4 on the stools with infinite selection within the range. The plastic mechanism shroud and control handles match the color of the chair. Engage Fixed Armrests A curved and angled-forward arm support that is molded from reinforced nylon supports a self-skinning urethane armrest. The armrests are spaced 19 apart. ll parts are color matched to the other plastic parts of the chair. The nylon supports are bolted to the bottom of the mechanism with four 5/16 self-tapping bolts and are field-installable. Engage Adjustable Armrests with Pivoting Armcaps A curved and angled-forward arm support that is molded from reinforced nylon supports a height adjustable nylon sleeve that allows for 4 of vertical adjustment from 6 to 10 above the seat. The armrest height is adjusted by pressing a button mounted in the sleeve. The sleeve supports a self-skinning urethane armrest that pivots 360 from a point near the back of the armrest. The armrest has 4 detents that allow the armrest to snap into position, one straightforward, one each at 20 inward and 20 outward, and one at 180 reversed back position. The armrests are spaced 18-1/2 apart on the chairs and 19 apart on the stools. All parts are color matched to the other plastic parts of the chair. The nylon supports are bolted to the bottom of the mechanism with four 5/16 self-tapping bolts and are field-installable. 38
ERGONOMIC SEATING Pride (Engage) Specifications Back Height Adjustment Adjust the back height by pulling the lever at the lower right of the back, in either a seated or standing position, simply raise or lower the back to the desired height. Seat Height Adjustment Seat height is adjusted with a pneumatic cylinder. To lower height while seated, lift the lever at the right front of the seat. To raise the height, remove your weight from the seat while lifting the lever. Arm Height Adjustment Depress button and raise or lower to desired height. Seat Depth Adjustment To adjust the Pride chair for your torso length, you can adjust the seat depth. First, depress the button located on the left rear of the seat. With the button depressed, slide the seat forward or back such that seat depth is comfortable for you. The most comfortable seat depth for most people is one in which they are able to sit well into the seat, with their back resting against the chair back, and with a slight space between the underside of their knee and the front of the seat. Seat Tension Adjustment An adjustment can be made to the chair s seat tilt tension with the dial directly under the front of the seat. To increase the tension of the tilt, turn the dial clockwise. To decrease the tension, turn the dial counterclockwise. Back Angle Adjustment To lock the back in one of three angles, first move your back to the desired position. Then, pull up on the lever at the right rear of the seat. To return the back to its free-floating position, lean back slightly and push the lever down. Forward Seat Tilt Adjustment You can choose to allow the seat tilt forward by first leaning back slightly. While leaning back, lower the lever at the left front of the seat. You can then lean forward, and the sear will tilt downward with you. To eliminate the forward tilt of the seat, first lean back slightly. While leaning back, raise the lever at the left front of the seat. The seat will no longer tilt forward. NOTE: to open the forward seat tilt, or lock it out, the back angle lock must be in the down position. Engage Adjustable Armrests with Width Adjustable Armcaps A tubular steel frame supports self-skinning urethane armrests, height-adjustable armrests (2-1/2 travel) and width adjustable armrests (1 of horizontal travel per arm). The support is welded to the seat underside and powder coated to match other hard surface elements. Engage Adjustable Armrests with Fixed Armcaps A curved and angled-forward arm support that is molded from reinforced nylon, supports a heightadjustable reinforced nylon sleeve that allows for 4 of vertical adjustment from 6 to 10 above the seat. The armrest height is adjusted by pressing a button mounted in the sleeve. The sleeve supports a selfskinning urethane armrest. The armrests are spaced 18-1/2 apart on the chairs and 19 apart on the stools. All parts are color-matched to the other plastic parts of the chair. The nylon supports are bolted to the bottom of the mechanism with four 5/16 self-tapping bolts and are filed-installable. Base The 24 diameter (on chairs) and the 26 diameter (on stools), five-blade base is molded from reinforced nylon. A telescoping cylinder shroud conceals the pneumatic cylinder. All finishes match the chair color. Carpet Casters 60mm diameter double wheels are molded of highimpact thermoplastic. High-impact plastic frame. Finish matches chair color. Soft Casters 60mm diameter double wheels are molded of soft plastic. High-impact plastic frame. Black finish only. Footring (on Stools) Chrome footring is standard. 39
Pride (Engage) ERGONOMIC SEATING MODEL NUMBER Basic Model Arms Casters Frame Poly Back ENGP BL ENGMP BL ENG247P BL ENG247MP BL Upholstered Back ENGU BL ENGMU BL ENG247U BL ENG247MU BL Stool Poly Back ENGSP BL ENGSMP ENG247SP ENG247SMP BL BL BL Stool Upholstered Back ENGSU BL ENGSMU BL ENG247SU BL ENG247SMU BL l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select arm option. NA = Armless FA = Fixed Arms HA = Height Adjustable Arms AA = Adjustable Arms BA = Adjustable Arms w/cap C Select caster option. CC = Carpet Casters SC = Soft Casters Add $25 D Select frame color. BL = Black Select upholstery fabric. Cards are available online and by request. 40
ERGONOMIC SEATING Pride (Engage) LIST PRICES Arms Height Adjustable Soft Casters (SC) Armless Fixed Arms Adjustable $661 $787 $835 $867 $25 702 828 876 908 25 701 827 875 907 25 742 868 916 948 25 702 828 876 908 25 743 869 917 949 25 741 867 915 947 25 782 908 956 988 25 739 965 913 945 25 780 906 954 986 25 778 904 952 984 25 820 946 994 1026 25 779 905 953 985 25 821 947 995 1027 25 819 945 993 1025 25 860 986 1034 1066 25 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 41
San Marco Specifications ERGONOMIC SEATING Executive Midback Side Chair Seat Width 20 1 /2 20 1 /2 20 1 /2 Seat Depth 19 19 19 Back Height 29 1 /8 26 1 /8 26 1 /8 Base 25 25 N/A Usage Single 8 Hour Shift Single 8 Hour Shift Single 8 Hour Shift Weight Limit 300 lbs. 300 lbs. 300 lbs. HIGH BACK EXECUTIVE w Knee tilt control w Gas lift height adjustment 16"-20" w Tufted roll back for comfort w Contoured lumbar support reduces fatigue w Waterfall seat promotes circulation w Fire retardant foam w Steel base with wood caps MID-BACK w Swivel tilt control w Gas height adjusts 16"-20" w Curved profile combines style & support OFFICE ARMCHAIR w Thick cushions for comfort & elegance w Compliments any office decor w Matrex seat support system ensures lifelong comfort w Contouring results in passive lumbar support 42
ERGONOMIC SEATING San Marco MODEL NUMBER Basic Model Finish Casters List Price Soft Casters (SC) Executive Highback SAN-EXE $1800 $5 Executive Midback SAN-MID 1735 5 Office Armchair SAN-SIDE 1460 5 l l l A B C HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C Select finish color. NT = Natural CH = Cherry Select caster option. CC = Carpet Casters SC = Soft Casters Add $23 Select upholstery fabric. Cards are available online and by request. SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 43
Sterling 2 Specifications ERGONOMIC SEATING High Back Low Back Operational Sled Base Leg Base Stool Seat Width Seat Depth Back Width Back Height Back Height Adj. Overall Seat Height Height Range Overall Depth 21 21 21 21 21 21 19 19 19 19 19 19 19 19 19 19 19 19 24 17 1 /2 17 1 /2 17 1 /2 17 1 /2 17 1 /2 2 17-22 16-21 16-21 19 1 /2 19 1 /2 28-32 39 1 /4-46 1 /2 35 1 /2-40 1 /2 34 1 /2-41 1 /2 25 1 /2-27 35 1 /2 45 1 /2-49 1 /2 25 25 25 25 25 25 Usage Single 8 Hour Shift Single 8 Hour Shift Single 8 Hour Shift Single 8 Hour Shift Single 8 Hour Shift Single 8 Hour Shift Weight Limit 250 lbs. 250 lbs. 250 lbs. 250 lbs. 250 lbs. 250 lbs. Back Depth Back depth feature allows the user to adjust back to seat depth creating the utmost comfort the chair has to offer. The back depth mechanism is easy to use. A turn of the tension knob allows the user to slide the seat back into the desired position. Base Double wheels of high-impact thermoplastic allow the casters to easily move on carpeted areas. Seat Height The Sterling 2 seat is able to adjust to accommodate the individual user s seating height needs. Back The ratchet back allows for quick and easy height adjustment even when seated. Positions lumbar support where you need it. Tilt The operational chair model asynchronous tilt enables the seat to adjust 5 degrees forward and 10 degrees backward; the backrest tilts 6 degrees forward and 18 degrees backward. 44
ERGONOMIC SEATING Sterling 2 Specifications Seat Height Adjustment To lower seat height, pull the lever toward the seat while seated in the chair. To raise the seat, lift body weight slightly off chair while pulling the lever toward the seat. Release lever to lock in position. Lever Lock Devise (5 Locking Positions or Free Float) Rotate lever downward to lock the tilt action. Rotate lever upward to release to the free float position. Shift body weight slightly to engage or disengage lock function. Tilt Tension Adjustment To adjust chair s tilt tension, locate the hand knob on the front of the mechanism. While seated in the chair turn the hand knob clockwise to increase tension. Turn the hand knob counterclockwise to decrease tension. Back Height Adjustment To adjust back height, grasp chair back and lift to desired height. The back will lock at each click stop. To lower back, simply raise above last click stop, disengaging the ratchet mechanism, and lower back to lowest position. Raise back height to desired position. Back Depth Adjustment To adjust back depth, locate hand knob under the backside of the chair. Turn hand knob counterclockwise to loosen the assembly. Move chair back horizontally in or out to desired back depth position. Turn hand knob clockwise to tighten the assembly. Arm Width Adjustment To adjust arm width, pull up on lever moving arm horizontally in or out to one of three adjustment settings. Release lever to lock in place. Arm Height Adjustment To adjust arm height, pull up on button located at the top of the arm assembly. Raise or lower arm to the desired height and release lever to lock in position. 45
Sterling 2 ERGONOMIC SEATING MODEL NUMBER Basic Model Upholstery Tilt Arms Casters Frame Highback Managerial SMH2 PB SMH2 UB Lowback Managerial SML2 l l l l l l A B C D E F HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select upholstery option. PB = Poly Back UB = Upholstered Back C D Select tilt option. KT = Knee Tilt ST = Syncroflex IN = Intense Use Tilt Select arm option. NA = No Arms AT = Adjustable Task Arm AL = Adjustable Loop Arm F Select frame color. BL = Black WG = Warm Grey GR = Grey Select upholstery fabric. Cards are available online and by request. E Select caster option. CC = Carpet Casters SC = Soft Casters Add $25 46
ERGONOMIC SEATING Sterling 2 LIST PRICES Tilt/Arms Knee Tilt No Arms Knee Tilt Adjustable Task Arms Knee Tilt Adjustable Loop Arms Syncroflex Tilt No Arms Syncroflex Tilt Adjustable Task Arms Syncroflex Tilt Adj. Loop Arms Intense Use No Arms Inetse Use Adjustable Task Arms Inetnse Use Adjustable Loop Arms $713 $815 $826 $715 $817 $828 $769 $871 $882 $25 613 715 726 615 717 728 669 771 782 25 Soft Casters (SC) 630 732 743 673 777 788 686 788 799 25 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 47
Sterling 2 ERGONOMIC SEATING MODEL NUMBER Operational Task Basic Model Arms Casters Glides Frame SO2 Stool SMS2 SMS2 PS Side Chair SL2 SG SL2 HG SS2 NG SS2 HG SS2 PG l l l l l A B C D E HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C Select arm option. NA = No Arms FL = Fixed Loop Arms FT = Fixed Task Arms AL = Adjustable Loop Arm AT = Adjustable Task Arm Select caster option. CC = Carpet Casters SC = Soft Casters PS = Poly Glides E Select frame color. BL = Black WG = Warm Grey GR = Grey Select upholstery fabric. Cards are available online and by request. D Select glide option. NG = No Glides SG =Steel Glides HG = Hard Glides 48
ERGONOMIC SEATING Sterling 2 LIST PRICES Tilt/Arms No Arms Fixed Loop Arms Fixed Task Arms Adjustable Loop Arms Adjustable Task Arms Soft Casters (SC) $666 $746 $735 $778 $767 $25 708 786 775 820 809 25 525 605 594 525 605 594 539 619 608 551 631 620 547 627 616 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 49
Pilot Specifications ERGONOMIC SEATING SPECIFICATIONS Seat Height Adjustment To lower the seat - remain seated in chair and raise the lever. To raise the seat - lift body weight slightly off the chair and raise the lever. Tilt Tension Adjustment Turn the knob clockwise to increase tension and counterclockwise to decrease tension. Back Height Adjustment To raise the back - grasp the loweredge of the back and raise the back to the desired height. To lower the back - first raise the backto its uppermost limit and then allow the back to fall to its lowest limit. Back Angle Adjustment Hold the lever up to change the back angle; drop the lever to lock the back angle. Tilt Lock Adjustment Raise the lever to allow seat and back to rock; drop the lever to prevent movement. Seat Width Seat Depth Overall Height 24 17-19.5 43-52 Overall Width 27 Overall Depth 27 Usage 24/7 Weight Limit 450 lbs. Seat Seat is constructed of 5/8" thick, 10-ply plywood with one solid steel reinforcement plate that spans from seat edge to seat edge and 3.75" thick molded foam. The steel reinforcement plate has welded steel t-nuts for arms and mechanism. The contoured molded foam-covered board is upholstered with fabric. The front edge of the seat has a waterfall design. The seat is attached to a seat mechanism with four 5/16" screws into steel welded t-nuts. An integral seat slide is attached to the under side of the seat board which allows the seat depth to be adjusted from 17" to 19.5". A black dust cover fabric shrouds the seat slide. The seat slide assembly is mounted to steel attachment brackets in the mechanism and seat plate that allow the seat to slide in and out. Seat Mechanism (tilting) Chair features infinitely locking back tilt, and tilt rocking. Pneumatic Height Adjustment Chair features pneumatic seat height adjustment from 18" to 23". Backrest (vertically adjustable) Backrest is constructed of ½" thick 9-ply plywood and 2½" body-contoured molded foam. The outer back shell is upholstered plywood. The backrest is attached to a five-position ratcheting mechanism that provides 4" of vertical adjustment along a 1/4" thick x 4" wide high-strength steel J-bar. The J-bar is fastened directly to the seat mechanism with three 5/16" bolts. Base Extra-wide 27" five-blade base constructed of heavyduty composite. The center of the base has a patented non-slip ring where the pneumatic cylinder is mounted. A telescoping cylinder shroud conceals the heavy-duty pneumatic cylinder. Casters Heavy-duty 55mm diameter double wheels are molded of high-impact plastic with steel stud. Loop Armrests Main armrest support is made of ¼" thick by 2-1/4" wide bent steel constructions. Armrests are attached to a solid steel reinforcement plate that spans from side to side and which is mounted to the seat board for increased arm strength. Armrest pads are selfskinning soft urethane material with steel inner structures. Loop arms are fixed height. 50
ERGONOMIC SEATING SPECIFICATIONS Pilot MODEL NUMBER Basic Model Arms Casters Frame List Price 24/7 PILOT NA FN $1149 PILOT AA FN 1278 PILOT LA FN 1278 PILOT AL FN 1278 PILOT BA FN 1498 l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C D Select arm option. NA = No Arms AA = Adjustable Arms LA = Loop Arms AL = Adjustable Loop Arm BA = Breakaway Arms Select caster option. CC = Carpet Casters SC = Soft Casters Select frame color. FN = Flannel Select upholstery fabric. Cards are available online and by request. SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 51
247-HD Specifications ERGONOMIC SEATING SPECIFICATIONS Lumbar Support Built in lumbar support Tilt Tension Adjustment Turn the knob clockwise to increase tension and counterclockwise to decrease tension. Mechanism Swivel-tilt mechanism, infinite tilt lock complete with back depth adjustment and pneumatic height adjustment Adjustable Arms Lever operated width and height adjustable arms and high durometer polyurethane waterfall arm pads. Seat Seat is reinforced by 1/4 thick steel plate that has arms and mechanism attached to it for exceptional strength. The seat has a waterfall design to reduce muscle fatigue. It is also made with high density, high resiliency ENERSORB foam. Seat Height Overall Height Overall Width Overall Depth 247-HD w/headrest 247-HD No Headrest 18-23.5 18-23.5 48.5-54 40.5-46 26.5-30 26.5-30 26.5 26.5 Usage 24/7 24/7 Weight Limit 450 lbs 450 lbs Seat Seat is reinforced by 1/4 thick steel plate that has arms and mechanism attached to it for exceptional strength. The seat has a waterfall design to reduce muscle fatigue. It is also made with high density, high resiliency ENERSORB foam. Arms Lever operated width and height adjustable arms and high durometer polyurethane waterfall arm pads. Seat Mechanism Swivel-tilt mechanism, infinite position tilt lock complete with back depth adjustment, pneumatic heights adjustment and tension control. Headrest The headrest is a ratcheted headrest. Base 5 progne heavy duty aluminum base Casters 3 dual wheel carpet casters. 52
ERGONOMIC SEATING SPECIFICATIONS 247-HD MODEL NUMBER Basic Model Headrest Casters List Price Soft Casters 24/7 247-HD -X $1610 $100 247-HD -H 1710 $100 l l l A B C HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C Select headrest option. -X = No Headrest -H = Headrest Select caster option. CC = Carpet Casters SC = Soft Casters Add $100 Select upholstery fabric. Cards are available online and by request. SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 53
Advise Specifications LOUNGE/SIDE SEATING Armchair Seat Width 19 7 /8 Seat Depth 18 Back Width 20 1 /4 Back Height (Above Seat) Overall Seat Height 13 19 1 /2 Overall Width 23 3 /4 Overall Depth 26 Width Between Arms Width Outside Arms 19 3 /4 23 1 /4 Weight 23 Frame Made of 18 gauge tubing, the sleekand durable black powder-coatedtubular sled base frame can withstandyears of use. Arm Pads Preformed, full-length polyurethanearm pads provide a soft yet stable basefor arms and elbows. Back Advise offers a black, textured, urethane back shroud for addedstrength and support. Seat Extra wide seat area (19-7/8"), extra seat depth (20") and extra deepcushioning for superior comfort. 54
LOUNGE/SIDE SEATING Advise MODEL NUMBER Basic Model Frame Color List Price Upholstered Side Chair AD $310 l A l B HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select frame color. BL = Black Select upholstery fabric. Cards are available online and by request. SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 55
Alta Specifications LOUNGE/SIDE SEATING Armchair Armless Dolly Seat Width 17 1 /2 17 1 /2 Seat Depth 17 1 /2 17 1 /2 Seat Height 17 1 /2 17 1 /2 Overall Height 31 1 /2 31 1 /2 Overall Width 21 5 /8 19 3 /8 22 3 /8 Overall Depth 21 1 /4 21 1 /4 22 3 /8 Arms to floor 25 3 /8 Stacking on Dolly Qty/Height Stacking on Floor Qty/Height 10/52 10/52 4/40 4/40 Frame Legs of 7/8 o.d. x 13-gauge tubular steel. Kick back rear legs increase structural integrity and add to stability. Side members of 7/8 o.d. x 13-gauge tubular steel. Cross tube members of 7/8 o.d. x 14-gauge tubular steel. All joints are robotically welded. Tube End Caps (Armless Chair) Molded plastic. The end cap will match the frame color. Floor Glides Chrome plated steel. Upholstered Backrest Two-piece construction. Inner back is 9-ply hard maple with 3/4 thick polyurethane foam. Outer back is a vacuum-formed polystyrene attached with six wood screws. Frame Finishes Baked-on electrostatically-applied epoxy powder coating, or bright nickel-chrome plating. Transport Dolly Tubular steel frame, black powder-coated finish. Four 5 swivel wheels. Upholstered Seat Inner seat is 3/8 thick polypropylene. Fastens to frame with four screws thru T-nuts embedded in seat. Polyfoam cushion 3/4 thick, glued to seat. 56
LOUNGE/SIDE SEATING Alta Specifications 57
Alta - Side Chairs/Stacking LOUNGE/SIDE SEATING MODEL NUMBER Upholstered Side Chair Basic Model Ganging Frame Color Glides ALT1NAL Upholstered Arm Chair ALT1WAL Dolly MVP-DOLLY l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C Select ganging option. NG = Non-Ganging GA = Ganging Select frame color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal D ND TO SU LC WS CM SX ZM NK AV CH = Nordic = Tangelo = Sunburst = Lemon Cream = Wet Sand = Champagne Metallic = Starlight Silver Metallic = Bronze Metallic = Nickel Vein = Antique Vein = Chrome Select glide option. P = Plastic S = Steel Chrome Select upholstery fabric. Cards are available online and by request. 58
LOUNGE/SIDE SEATING Alta - Side Chairs/Stacking LIST PRICES Ganging Non- Ganging Ganging Dolly $273 $296 274 297 N/A SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 59
Alta - Side Chairs/Non-Stacking LOUNGE/SIDE SEATING MODEL NUMBER Upholstered Sled Base Chair Basic Model Ganging Tablet Mount ALT1NAS Frame Color Laminate Glides Upholstered Sled Base Arm Chair ALT1WAS Upholstered Tablet Arm Chair ALT1T l l l l l l A B C D E F HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C D Select ganging option. NG = Non-Ganging GA = Ganging Select tablet mount option. AR = Right Hand Side AL = Left Hand Side Select frame color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne E AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal ND = Nordic TO = Tangelo SU = Sunburst LC = Lemon Cream WS = Wet Sand CM = Champagne Metallic SX = Starlight Silver Metallic ZM = Bronze Metallic NK = Nickel Vein AV = Antique Vein CH = Chrome Select laminate option. SP = Standard Laminate CP = Customer Specified Laminate F Select glide option. P = Plastic S = Steel Chrome NG = No Glides (Sled) NS = Non Skid PVC Glides (Sled) Select upholstery fabric. Cards are available online and by request. 60
LOUNGE/SIDE SEATING Alta - Side Chairs/Non-Stacking LIST PRICES Ganging Ganging Non- Ganging Ganging Non-Ganging PVC Glides (Sled) PVC Glides (Sled) $276 $299 $293 $316 287 310 304 327 360 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 61
Alta Plus - Side Chairs/Stacking LOUNGE/SIDE SEATING MODEL NUMBER Upholstered Side Chair Basic Model Ganging Frame Color Glides ALT1NAL-P Upholstered Arm Chair ALT1WAL-P l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C Select ganging option. NG = Non-Ganging GA = Ganging Select frame color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal D ND TO SU LC WS CM SX ZM NK AV CH = Nordic = Tangelo = Sunburst = Lemon Cream = Wet Sand = Champagne Metallic = Starlight Silver Metallic = Bronze Metallic = Nickel Vein = Antique Vein = Chrome Select glide option. P = Plastic S = Steel Chrome Select upholstery fabric. Cards are available online and by request. 62
LOUNGE/SIDE SEATING Alta Plus - Side Chairs/Stacking LIST PRICES Ganging Non- Ganging Ganging $303 $326 304 327 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 63
Alta Plus - Side Chairs/Non-Stacking LOUNGE/SIDE SEATING MODEL NUMBER Upholstered Sled Base Chair Basic Model Ganging Tablet Mount ALT1NAS-P Frame Color Laminate Glides Upholstered Sled Base Arm Chair ALT1WAS-P Upholstered Tablet Arm Chair ALT1TA l l l l l l A B C D E F HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C D Select ganging option. NG = Non-Ganging GA = Ganging Select tablet mount option. R-P = Right Hand Side L-P = Left Hand Side Select frame color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne E AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal ND = Nordic TO = Tangelo SU = Sunburst LC = Lemon Cream WS = Wet Sand CM = Champagne Metallic SX = Starlight Silver Metallic ZM = Bronze Metallic NK = Nickel Vein AV = Antique Vein CH = Chrome Select laminate option. SP = Standard Laminate CP = Customer Specified Laminate F Select glide option. P = Plastic S = Steel Chrome NG = No Glides (Sled) NS = Non Skid PVC Glides (Sled) Select upholstery fabric. Cards are available online and by request. 64
LOUNGE/SIDE SEATING Alta Plus - Side Chairs/Non-Stacking LIST PRICES Ganging Ganging Non- Ganging Ganging Non-Ganging PVC Glides (Sled) PVC Glides (Sled) $306 $329 $323 $346 317 340 334 357 390 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 65
Alta - Poly LOUNGE/SIDE SEATING MODEL NUMBER Poly Side Chair Basic Model Ganging Frame Color Glides ALT1NALPY Poly Arm Chair ALT1WALPY Poly Side Chair ALT1NASPY Poly Arm Chair ALT1WASPY l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C Select ganging option. NG = Non-Ganging Select frame color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal D ND = Nordic TO = Tangelo SU = Sunburst LC = Lemon Cream WS = Wet Sand CM = Champagne Metallic SX = Starlight Silver Metallic ZM = Bronze Metallic NK = Nickel Vein AV = Antique Vein CH = Chrome Select glide option. P = Plastic S = Steel Chrome 66
LOUNGE/SIDE SEATING Alta - Poly LIST PRICES Ganging A B Non-Ganging $184 214 186 228 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 67
Cricket Specifications LOUNGE/SIDE SEATING Overall Width 23 Overall Depth 21 Overall Height 32 Back Height 14 Seat Height 17 Back Width 18 Seat Depth 18 Seat Width 18 Weight 22 Features Frame 7/8 O.D., 13 gauge heavy duty round tubular steel with rear angled legs. Frame finish - high impact epoxy powder coat, electrostatically applied for corrosion resistance, standard in semi gloss black. Compound curved back provides superior comfort and support. Stacks 10 high on dolly and stacks 6 high, free standing. Chrome plated metal cushion glides. California Fire Code #117. Flared black nylon arm (Optional) ANSI/BIFMA. 68
LOUNGE/SIDE SEATING Cricket MODEL NUMBER Basic Model Arms List Price Cricket 4-Leg 500FWD NA $500 500FWD AA $511 l A l B HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select arm option. NA = No Arm AA =Flare Arms SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 69
Lounge Specifications LOUNGE/SIDE SEATING Model Width Depth Height Back Height Seat Height Back Width Seat Depth Seat Width Weight (lbs.) 6460 30 26 32-1/2 17 18 20 18 19-1/2 38 6480 30 26 31 17 18 20 18 19-1/2 38 1201 32 32 27-1/2 16 17 24 21 24 95 1202 56 32 27-1/2 16 17 49 21 49 135 1203 80 32 27-1/2 16 17 73 21 73 174 Danforth Series Modular construction. High density foam for durability and comfort. Suitable for reception areas, hospital waiting areas and retirement homes. Sorrento Tub Chair Generously upholstered with super soft high density foam for comfort and durability. Ergonomically designed with new built-in lumbar support. 5 prong heavy duty nylon base. 2 dual wheel carpet casters. Solid wood 21/2 legs. Levelling glides. Finish - mechanism, casters and trim available in black only. 70
LOUNGE/SIDE SEATING Lounge MODEL NUMBER Basic Model List Price Sorrento Chair 6460 Casters $1725 6480 Wood Leg 1725 Danforth Upholstered Chair 1201 2550 Danforth Upholstered Love Seat 1202 3400 Danforth Upholstered Couch 1203 4350 l A HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. Select upholstery fabric. Cards are available online and by request. SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 71
Navigator Specifications LOUNGE/SIDE SEATING Seat Width Seat Depth Back Width Back Height Overall Width Overall Depth Overall Height Seat Height Top of arm to floor Nesting (two chairs) 17 1 /4 18 1 /2 18 1 /4 14 23 1 /4 24 1 /4 33 1 /4 18 24 1 /4 26 Seat and Backrest Seat is two-piece construction of molded plywood upholstery board with a molded compound curved nylon shroud with a textured finish. Seat is always upholstered. Foam (1-3/4 ) is applied to the molded plywood upholstery board. Fabric is then upholstered over the foam. Backrest is available in either a polypropylene or upholstered version. Backrest is molded compound curved polypropylene with a textured finish. Backrest has an integral, molded handle. Back upholstery liner is molded polypropylene with glued on foam (1/2 ). Fabric is upholstered over the foam. The liner is secured to the backrest by four #10 color-matched machine screws. Seat flips up to allow chairs to nest for storage and transport. Backrest Supports Two welded steel backrest supports attach the backrest to the torsion mechanism. Torsion Mechanism The back flex is achieved by the torsion mechanism. It consists of two flat torsion springs captured at both ends by steel bushings that are welded to the backrest supports. The torsion mechanism creates gradually increasing resistance over the full 12 of back flex. Frame The frame is made up of four legs welded to a steel mechanism tube. The legs are 1, 13- gauge steel tubing. Reinforcement plates are welded between front and back legs for added strength. Nylon covers fit over the plates. Arms Armrests are made of nylon. Armrests rotate with the back. Leg Finishes Baked-on electrostatically-applied epoxy powder- coating or bright nickel-chrome plating. Casters 60mm diameter double wheels of high-impact thermoplastic. High-impact plastic frame. For carpet casters, caster matches frame finish if frame is black or warm grey. Other frame finishes have black casters. For hard floor casters, casters are always black. 72
LOUNGE/SIDE SEATING Navigator Specifications 73
Navigator LOUNGE/SIDE SEATING MODEL NUMBER Navigator Basic Model Arms Upholstery NAV Frame Color Seat/Back Color Armrest Color Caster l l l l l l l A B C D E F G HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select arm option. NA = No Arms WA = Arms C D Select upholstery option. PBUS = Poly Back UBUS= Upholstered Back Select frame color. SA = Sand CH = Chrome GR = Grey WG = Warm Grey BL = Black F G Select armrest color. ANA = None - Armless AWG = Warm Grey ABL = Black Select caster option. CC = Carpet Casters SC = Soft Casters Select upholstery fabric. Cards are available online and by request. E Select seat/back color. SWG = Warm Grey SBL = Black 74
LOUNGE/SIDE SEATING Navigator LIST PRICES Arms/Upholstery No Arms Poly Back No Arms Uph. Back Arms Poly Back Arms Uph. Back Soft Casters $400 $450 $430 $480 $25 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 75
Revelation Specifications LOUNGE/SIDE SEATING Seat Width Seat Depth Seat Height Floor to back height Overall Width Overall Depth Overall Height Overall Width on Dolly Overall Depth on Dolly Max on Dolly Max on Floor Armchair 16 1 /2 17 18 32 23 1 /2 23 32 23 1 /2 36 10 6 Armless 16 1 /2 17 18 32 20 1 /2 22 32 22 1 /2 36 10 6 Armchair w/casters 16 1 /2 17 18 32 23 1 /2 23 32 Frame Legs are 1 o.d. x 16-gauge tubular steel. Cross members are 1 o.d. x 14-gauge tubular steel. Side members are 7/8 o.d. x 14-gauge tubular steel. On the stools, the footring is 16- gauge tubular steel. For both chairs and stools, all joints are welded. Wallsaver frame has an angled rear leg. Caster-based frame has a curved front leg. Armrests Injection molded nylon. Armrests are attached to the backrest without fasteners. Arms are assembled over the backrest attachment tubes of the frame when the backrest is installed. The backrest is then locked in place using a patented turn and lock feature. attached to the seat and back using four 10-24 x 3/8 truss head screws. Seat screws are not exposed. Backrest screws are exposed and are color matched to the polypropylene. Glides Chrome plated steel or plastic. Frame Finishes Baked-on electrostatically-applied epoxy powder coating, or bright nickel-chrome plating. Transport Dolly Tubular steel frame, black powder-coated finish. Four 5 swivel wheels. Polypropylene Seat and Backrest Injection-molded polypropylene Upholstered Seat and Back Molded urethane foam is attached to the seat board, which is injection molded polypropylene. Slab urethane foam is attached to the back board, which is injection molded polypropylene. The boards are 76
LOUNGE/SIDE SEATING Revelation Specifications Stool Seat Width Seat Depth Seat Height Floor to back height Overall Width Overall Depth Overall Height Armchair 16 1 /2 17 30 44 23 1 /2 23 44 Armless 16 1 /2 17 30 44 20 1 /2 22 44 77
Revelation Armless LOUNGE/SIDE SEATING MODEL NUMBER Basic Model Frame Color Poly Color Glides List Price Casters Armless Poly Chair REV $185 $30 Armless Upholstered Seat/Poly Back REVUS 271 30 Armless Upholstered Seat and Back REVUSUB 315 30 l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select frame color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal ND = Nordic TO = Tangelo SU = Sunburst LC = Lemon Cream WS = Wet Sand C D CM SX ZM NK AV CH = Champagne Metallic = Starlight Silver Metallic = Bronze Metallic = Nickel Vein = Antique Vein = Chrome Select poly color. BL = Black WG = Warm Grey Select glide option. PG = Black Plastic Glide SG = Steel Glide CC = Casters Add $30 Select upholstery fabric. Cards are available online and by request. 78
LOUNGE/SIDE SEATING Revelation Armchair MODEL NUMBER Basic Model Frame Color Poly Color Glides List Price Casters Poly Chair REVA $209 $30 Upholstered Seat/Poly Back REVUSA 294 30 Upholstered Seat and Back REVUSUBA 338 30 l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select frame color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal ND = Nordic TO = Tangelo SU = Sunburst LC = Lemon Cream WS = Wet Sand C D CM SX ZM NK AV CH = Champagne Metallic = Starlight Silver Metallic = Bronze Metallic = Nickel Vein = Antique Vein = Chrome Select poly color. BL = Black WG = Warm Grey Select glide option. PG = Black Plastic Glide SG = Steel Chrome Glide CC = Casters Add $30 Select upholstery fabric. Cards are available online and by request. SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 79
Revelation Stool Armless LOUNGE/SIDE SEATING MODEL NUMBER Basic Model Frame Color Poly Color Glides List Price Casters Armless Poly Chair REVS $378 $30 Armless Upholstered Seat/Poly Back REVSUS 466 30 Armless Upholstered Seat and Back REVSUSUB 510 30 l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select frame color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal ND = Nordic TO = Tangelo SU = Sunburst LC = Lemon Cream WS = Wet Sand C D CM SX ZM NK AV CH = Champagne Metallic = Starlight Silver Metallic = Bronze Metallic = Nickel Vein = Antique Vein = Chrome Select poly color. BL = Black WG = Warm Grey Select glide option. PG = Black Plastic Glide SG = Steel Chrome Glide CC = Casters Add $30 Select upholstery fabric. Cards are available online and by request. 80
LOUNGE/SIDE SEATING Revelation Stool Armchair MODEL NUMBER Basic Model Frame Color Poly Color Glides List Price Casters Poly Chair REVSA $401 $30 Upholstered Seat/Poly Back REVSUSA 489 30 Upholstered Seat and Back REVSUSUBA 333 30 Dolly REVD-BL 336 l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select frame color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal ND = Nordic TO = Tangelo SU = Sunburst LC = Lemon Cream WS = Wet Sand C D CM SX ZM NK AV CH = Champagne Metallic = Starlight Silver Metallic = Bronze Metallic = Nickel Vein = Antique Vein = Chrome Select poly color. BL = Black WG = Warm Grey Select glide option. PG = Black Plastic Glide SG = Steel Chrome Glide CC = Casters Add $30 Select upholstery fabric. Cards are available online and by request. SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 81
Scandinavian Specifications LOUNGE/SIDE SEATING SC1000 SC1200 SC1300 Seat Width 20 41 61 1 /2 Seat depth 19 23 1 /2 23 1 /2 Back Width 20 41 61 1 /2 Back Height 9 1 /2 14 3 /8 14 3 /8 Chair Height 32 31 31 Seat Height 19 1 /2 15 3 /16 15 3 /16 Description Designed as office side chairs or for waiting and lounge areas, cafeterias or conference rooms, Scandinavian side chairs, and the two and three seat settees, are crafted from solid, light oak with mortise and tenon joints throughout. The new web seat support system and duo-foam seat cushion provide luxurious seat comfort. The contoured back of the SC1000 is fully cushioned and upholstered providing both comfort and support. The settee backs have deep foam cushions. Scandinavian seating is manufactured with a sled style base and wood, full-length arms. The Scandinavian chairs are comfortable, stylish and durable. Scandinavian products are available in a natural, honeytone teak, or walnut finish and customer s choice of hundreds of fabrics. 82
LOUNGE/SIDE SEATING Scandinavian Specifications 83
Scandinavian LOUNGE/SIDE SEATING MODEL NUMBER Basic Model Frame Finish List Price Upholstered Armchair SC1000 $760 Upholstered Side Chair - Sled Base SC5200 690 Upholstered Side Chair - 4-Leg Base SC5201 650 l A l B HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select frame finish. RW = Regency Walnut NO = Natural Oak HT = Honeytone Teak MA = Mahogany Select upholstery fabric. Cards are available online and by request. 84
LOUNGE/SIDE SEATING Scandinavian MODEL NUMBER Basic Model Frame Finish List Price Upholstered 2Seat Settee SC1200 $1225 Upholstered 3Seat Settee SC1300 1550 l A l B HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select frame finish. RW = Regency Walnut NO = Natural Oak HT = Honeytone Teak MA = Mahogany Select upholstery fabric. Cards are available online and by request. SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 85
Sophic Specifications ERGONOMIC SEATING SPECIFICATIONS Armchair Seat Height 18 1 /2 Seat Depth 18 1 /2 Overall Height 32 1 /2 Overall Width 22 1 /2 Overall Depth 24 1 /2 Width Between Arms (rear) Width Between Arms (front) 19 20 Arm Height 27 1 /2 Frame Elegantly tapered wooden legs are a feature of the Beech hardwood frame. Arms Sophic offers graceful, contoured, open wood arms. Back Fully-upholstered back features a gentle curve. Seat Seats are generously cushioned and padded for extra comfort through the use of webbing and foam. 86
ERGONOMIC SEATING SPECIFICATIONS Sophic MODEL NUMBER Basic Model Frame Color List Price Upholstered Side Chair SOPHIC $910 l A l B HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select stain color. SP = Standard Stain Select upholstery fabric. Cards are available online and by request. SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 87
1060 Specifications STACKING/CLASSROOM SEATING 1060NA 1060 Seat Height 17 3 /4 17 3 /4 Overall Height 30 3 /4 30 3 /4 Overall Width 21 24 Overall Depth 22 3 /4 27 3 /4 Shells One-piece contoured high-impact polypropylene. Heavy-duty construction with ribs to reinforce points of stress. Rolled edges for comfort and strength. Textured front and back. Fastens with four screws. Color permeates shell. Fixed Seat Cushion 1 polyfoam sealed to molded hardboard base. Factory-installed only. Replaceable; fasten with screws. Fixed Seat and Backrest Cushion 1 polyfoam sealed to molded hard board base. Factory-installed only. Replaceable;fasten with screws. 1060 Stack Chair Legs Two leg sections of 18-gauge, 7/8 o.d. seamwelded rounded tubular steel are welded to two 14-gauge, 3/4 o.d. tubular steel seat mounting members. Nylon bumpers on insides of legs protect finish in stacking. Ganging models have interlocking steel rod loops welded to frame under seat which engage adjacent chairs. Plastic glides. 1060 Fixed Tablet Arm Chair Frame 18-gauge, 7/8 square tube frame welded to square legs. Finished to match legs. Tablets are 5/8 highdensity particleboard with melamine laminate faced top and backing sheets. Nonstacking. Standard Bright Chrome Finish Surfaces are duplex nickel-chrome plated in a twenty-one step process. Optional Powder-Coated Finish Electrostatically-applied epoxy powder, baked on. 88
STACKING/CLASSROOM SEATING 1060 Specifications 89
1060 STACKING/CLASSROOM SEATING MODEL NUMBER Basic Model Upholstery Arm Option Armless 1060NA NG 1060NA GA Arm Direction Ganging Frame Color Poly Poly Color Laminate Tablet Arms 1060 FX-S NG 1060 FX-S GA 1060 FX-O NG 1060 FX-O GA l l l l l l l l l A B C D E F G H I HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C D E Select upholstery option. UPSO= Upholstered Seat UPSB = Upholstered Seat & Back Select tablet arm option. FX-S = Standard Fixed FX-O = Oversized Fixed Select tablet arm direction option. R = Right L = Left Select ganging option. NG = Non-ganging GA = Ganging F G H Select frame color. SA = Sand CH = Chrome GR = Grey WG = Warm Grey BL = Black Select poly option. SP = Standard Select poly color. SA = Sand GR = Grey WG = Warm Grey BL = Black LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne I AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal ND = Nordic TO = Tangelo SU = Sunburst LC = Lemon Cream WS = Wet Sand Select laminate option. SP = Standard Laminate CP = Customer Specified Laminate Select upholstery fabric. Cards are available online and by request. 90
STACKING/CLASSROOM SEATING 1060 LIST PRICES Upholstery/Poly Uph. Seat Stnd. Poly Uph. Seat/Back Stnd. Poly $187 $233 204 250 289 335 306 352 311 357 328 374 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 91
Cheyenne Specifications STACKING/CLASSROOM SEATING Armless Arm Chair Seat Width 18 1 /4 18 1 /4 Seat Depth 17 1 /2 17 1 /2 Overall Width 19 1 /2 23 3 /8 Overall Depth 21 1 /2 21 1 /2 Overall Height 32 1 /2 32 1 /2 Seat Height 18 18 Overall Depth stacking on Dolly 36 36 Max Qty/Height on Dolly Plastic Seat 25/79 12/67 Upholstered Seat 25/79 12/67 Cushioned Seat 12/60 12/70 Plastic Chair Seats and Backrests Injection-molded polypropylene. Seat is one piece screwed to frame. Backrest has two sections which form a snap-fit and are then screwed together. Chair seats have two dieformed 7-gauge straps welded to side frames. Upholstery Covers front of seat and backrest. Cushioned and upholstered models have 1/2 foam padding on seat and backrest. Upholstered models without cushions have upholstery fastened to shell. The back panel of the backrest is not upholstered. Chair Frame Armless version has 7/16 o.d. solid steel rod welded into a one-piece unit. Armchair version has 7/16 o.d. steel rod and 5/8 steel tubing welded into a one-piece unit. Seats have two die-formed 7-gauge straps welded to side frames. Bright duplex nickel-chrome plated or painted finish. Back Articulation Articulation is achieved with a single-piece frame which flexes as the back pivots around its upper and lower crossbars. The seat is hung from the lower back so that the user s weight perfectly counterbalances the tilting pressure of the upper back. Polypropylene Arm Injection-molded polypropylene. Two-piece arm is joined by screws to encapsulate the frame. Arm is integral to frame. Stacking Bumpers An integral part of the frame, the bumpers are welded to the lower front frame radius. Two scuff protectors will be glued to the rear crossbrace of the Perry chair to prevent scuffing of seat wires when chairs are stacked. Bright Chrome Finish Surfaces are duplex nickel-chrome plated in a twentytwo step process. Tablet Arm 7/16 solid steel rod frame, hinged for easy access. Resin core tablet; high pressure laminate surface. Round tablet edge with clear lacquer finish. Bright chrome frame. Chairs are nonstacking with tablet arm. Not for use with powder-coated frames. Field-installable. Seating clearance is 16-1/4. Tablet is 20-5/8 long and 12 wide. An oversized tablet arm is also available. Tablet is 20-1/2 long and 17 wide. Powder-Coated Finish Electrostatically-applied epoxy, baked onto surface. Tubular and plate steel welded together. 5 casters: two swivel, two fixed. Black powder-coated finish. Ganging Wire loop ganging device. 5/16 steel rod is bent and welded to chair frame. Factory installed only. Available only on armless stack chairs with chrome frames. 92
STACKING/CLASSROOM SEATING Cheyenne Specifications Bookrack Steel rod frame, bright chrome finish only. Chairs are nonstacking with bookrack; not for use with powdercoated frames. Shipped k.d. Field-installable. 93
Cheyenne - Articulating Stack STACKING/CLASSROOM SEATING MODEL NUMBER Poly Armless Basic Model Glide Frame Color PRY-P Seat/Back Color Poly Armless w/ganging PRY-P-WCH Poly Arm Chair PRY-PA l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C D Select ganging option. NG = No Glides NS = Non Skid PVC Glides SG = Steel Glides PG = Poly Glides Select frame color. SA = Sand GR = Grey WG = Warm Grey BL = Black CH = Chrome Select seat/back color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF GX MZ BD CY AC FN SH MR ND TO SU LC WS = Cafe au Lait = Grape = Moss = Bordeaux = Cayenne = Abracadabra = Flannel = Splash = Marine Teal = Nordic = Tangelo = Sunburst = Lemon Cream = Wet Sand 94
STACKING/CLASSROOM SEATING Cheyenne - Articulating Stack LIST PRICES Glides No Glides PVC Glides Steel Glides Poly Glides $150 $164 $157 $153 1181 229 222 218 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 95
Cheyenne - Fixed Seat & Back STACKING/CLASSROOM SEATING MODEL NUMBER Upholstered Armless Basic Model Glide Frame Color PRYFSB-P Seat/Back Color Upholstered Armless w/ganging PRYFSB-P-WCH Upholstered Arm Chair PRYFSB-PA l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C D Select ganging option. NG = No Glides NS = Non Skid PVC Glides SG = Steel Glides PG = Poly Glide Select frame color. SA = Sand GR = Grey WG = Warm Grey BL = Black CH = Chrome Select seat/back color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal ND = Nordic TO = Tangelo SU = Sunburst LC = Lemon Cream WS = Wet Sand Select upholstery fabric. Cards are available online and by request. 96
STACKING/CLASSROOM SEATING Cheyenne - Fixed Seat & Back LIST PRICES Glides No Glides PVC Glides Steel Glides Poly Glide $267 $281 $274 $270 296 345 338 334 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 97
Cheyenne STACKING/CLASSROOM SEATING MODEL NUMBER Tablet Arm Basic Model Arm Size Arm Direction Laminate Dolly Type PRY- Bookrack PRY-BRK Dolly PRY l l l l l A B C D E HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C C Select arm size option. T = Standard 0 = Oversized Select arm direction. L-CH = Left R-CH = Right Select laminate option. SP = Standard Laminate CP = Customer Specified Laminate E Select dolly type. DP = Armless Chairs DA = Armchair DG = Ganging Chair 98
STACKING/CLASSROOM SEATING Cheyenne LIST PRICES Standard Arm Oversized Arm Bookrack Arnless Dolly $133 $179 Arn Chair Dolly 55 330 402 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 99
Dakota Specifications STACKING/CLASSROOM SEATING Armless Fixed Seat/Back Cushion Armless Overall Width 19 1 /2 19 1 /2 Overall Depth 16 1 /4 16 1 /4 Overall Height 32 1 /4 32 1 /4 Seat Height 18 18 Overall Depth stacking on Dolly 37 1 /2 37 1 /2 Max Qty/Height on Dolly Polypropylene Seat 45/79 Upholstered Seat 22/54 Fixed Seat 15/60 Fixed Seat and Back 16/63 1/ 2 Plastic Seats, Backrests and Armcaps Injection-molded polypropylene. Upholstery Upholstered Seat/Back, No Cushion chairs have fabric wrapped around the entire exposed seat surface and on both the front and rear of the chair back. Fixed Seat and/or Back Cushions have padded fabric only on the seat and on the front of the back. Both the seat and front of the back have plastic exposed around the cushions. Chair Frame 7/16 solid steel rod, bright duplex nickel chrome. Optional with electrostatically applied epoxy (not recommended on tablet arm models, bookracks or chairs to be used with bookracks). Tablet Arm 7/16 solid steel rod frame, hinged tablet for easy access. Standard size has resin core; high-pressure laminate surface. Round tablet edge with clear lacquer finish. Oversized has plywood core with clear lacquered edges. Black has black painted edges. Bright chrome frame only. Chairs are nonstacking when attached, not available for use with powder coated frame chairs. Tablet flips up for easy access. Seating clearance is 14 for standard and oversized tablet arms. Standard tablet is 20-1/2 long and 12 wide. Oversized tablet is 20-1/2 long and 17 wide. Tablet Arm on Upholstered Chair It is recommended that the tablet arm not be removed after it is affixed to the chair. Bright Chrome Finish Surfaces are duplex nickel-chrome plated in a twentyone step process. Powder-Coated Finish Electrostatically-applied epoxy, baked onto surface. Stacking and use of tablet arms and bookracks on powder-coated frames not recommended. 100
STACKING/CLASSROOM SEATING Dakota Specifications 101
Dakota STACKING/CLASSROOM SEATING MODEL NUMBER Poly Armless Basic Model Glide Frame Color MX Seat/Back Color Poly Arm Chair MXA Upholstered Seat and Back Armless MXFSB l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C Select ganging option. NG = No Glides NS = Non Skid PVC Glides PG = Clear Poly Glides GA = Clear Poly Ganging Glides GS =Steel Ganging Glides SG = Steel Glides LG = Lexan Ganging Glides Select frame color. SA = Sand GR = Grey WG = Warm Grey BL = Black CH = Chrome D Select seat/back color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal ND = Nordic TO = Tangelo SU = Sunburst LC = Lemon Cream WS = Wet Sand Select upholstery fabric. Cards are available online and by request. 102
STACKING/CLASSROOM SEATING Dakota LIST PRICES Glides No Glides PVC Glides Clear Poly Poly Ganging Steel Ganging Steel Glide $118 $133 $127 $127 $133 $136 Lexan Ganging Glides 183 198 192 201 257 272 266 272 275 272 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 103
Dakota STACKING/CLASSROOM SEATING MODEL NUMBER Upholstered Seat Basic Model Glide Frame Color MXFS Seat/Back Color Upholstered Seat and Back Arm Chair MXFSB-PA Upholstered Seat Arm Chair MXFS-PA l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C Select ganging option. NG = No Glides NS = Non Skid PVC Glides PG = Clear Poly Glides GA = Clear Poly Ganging Glides GS =Steel Ganging Glides SG = Steel Glides LG = Lexan Ganging Glides Select frame color. SA = Sand GR = Grey WG = Warm Grey BL = Black CH = Chrome D Select seat/back color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal ND = Nordic TO = Tangelo SU = Sunburst LC = Lemon Cream WS = Wet Sand Select upholstery fabric. Cards are available online and by request. 104
STACKING/CLASSROOM SEATING Dakota LIST PRICES Glides Steel Lexan Ganging No Glides PVC Glides Clear Poly Poly Ganging Ganging Steel Glide Glides $242 $257 $251 $257 $260 $257 327 342 336 345 307 322 316 325 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 105
Dakota STACKING/CLASSROOM SEATING MODEL NUMBER Tablet Arm Basic Model Arm Size Arm Mount Laminate MXT Transport Dolly MXD-TD-BL Fixed Seat and Back Dolly MXD-FSB-BL l l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C D Select arm size option. S = Standard - 20 1/2L X 12W O = Over sized - 201/2L X 17W Select arm mount option. R-CH = Right L-CH = Left Select laminate option. SP = Standard Laminate CP = Customer Specified Laminate 106
STACKING/CLASSROOM SEATING Dakota LIST PRICES Arm Standard Oversized Dolly $114 $133 275 275 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 107
Piper Specifications STACKING/CLASSROOM SEATING Seat Width 18 Seat Depth 17 1 /2 Seat Height 17 1 /2 Floor to Back Height 31 1 /2 Overall Width 19 1 /4 Overall Depth 21 1 /4 Ganging on Center 20 Stacking on Floor Depth 31 Width 19 1 /4 Qty/Height 10/38 3 /4 Stacking on Dolly Overall Width 23 Overall Depth 42 Qty/Height 38/80 Seat and Backrest Injection-molded polypropylene seat and back. Back features a contoured handle for easy lifting and stacking. Chair Frame 7/16 solid steel rod in bright nickel-chrome or with electrostatically-applied epoxy. Bright Chrome Finish Surfaces are duplex nickel-chrome plated in a twentyone step process. Powder-Coated Finish Electrostatically-applied epoxy, baked onto surface. Stacking powder-coated frames is not recommended. Transport Dolly Tubular and plate steel welded together. 5 casters: two fixed, two swivel. Powder-coated finish. 108
STACKING/CLASSROOM SEATING Piper Specifications 109
Piper STACKING/CLASSROOM SEATING MODEL NUMBER Basic Model Glide Ganging Frame Color Poly Stacking Chair PIP SP Poly Color Dolly PIP-DOLLY l l l l l l A B C D E F HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B C D Select glide option. NG = No Glides PG = Polycarb Glide NS =PVC Non-Skid Glide SS = Stainless Steel Glide Select ganging option. NG = Non-ganging GA = Ganging Select frame color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss E BD CY AC FN SH MR ND TO SU LC WS CM SX ZM NK AV CH = Bordeaux = Cayenne = Abracadabra = Flannel = Splash = Marine Teal = Nordic = Tangelo = Sunburst = Lemon Cream = Wet Sand = Champagne Metallic = Starlight Silver Metallic = Bronze Metallic = Nickel Vein = Antique Vein = Chrome Select poly option. SP = Standard Poly F Select seat/back color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal ND = Nordic TO = Tangelo SU = Sunburst LC = Lemon Cream WS = Wet Sand 110
STACKING/CLASSROOM SEATING Piper LIST PRICES Glides/Ganging Dolly No Glides No Ganging Polycarb Glides No Ganging PVC Glides No Ganging Stainless Steel No Ganging Polycarb Glides Ganging Stainless Steel Ganging $97 $100 $108 $105 $106 $111 $290 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 111
Solitude Specifications STACKING/CLASSROOM SEATING Seat Width Seat Depth Seat Height Overall Width Overall Depth Overall Height Arms to Floor Ganging on Center Overall Width Stacking on Dolly Overall Depth Qty/ Height Stacking on Floor Qty/ Width Depth Height Arm Chair 171/2 16 173/4 24 20 321/4 27 25 39 12/65 24 30 8/51 Armless 171/2 16 173/4 181/4 20 321/4 25 25 39 12/65 20 30 8/51 Chair Frame Frame of 3/4 o.d. x 14-gauge tubular steel. Two leg frames are joined by means of U - shaped metal plates. Legs and side tubes are welded. Shell One-piece, textured nylon with fiberglass reinforcement. Back of shell is ribbed to allow back flex. Armrests Nylon reinforced with fiberglass. Tube Endcaps Armless chair. Glides Ball and socket joints to provide better leveling on any floor. Glides are available in black plastic or chromed steel. Frame Finishes Baked-on electrostatically-applied epoxy powder coating, or bright nickel-chrome plating. Transport Dolly Tubular steel frame, black powder-coat finish. Four 5 swivel wheels. Stacks 12 high. Upholstered Seat Seat is constructed of injection-molded polypropylene with 3/4 polyurethane foam cushion applied. Fastened to the shell with three screws thru T-nuts embedded in inner structure. Upholstered Backrest Back is constructed of injection-molded polypropylene with 3/8 polyurethane foam cushion applied. Fastened to the shell with three screws thru T-nuts embedded in inner structure. Stacking Bumper Plastic seat pan (black) for stacking support. 112
STACKING/CLASSROOM SEATING Solitude Specifications 113
Solitude STACKING/CLASSROOM SEATING MODEL NUMBER Poly Armless Basic Model SOL Frame Color Seat/Back Color Tube/End Cap Color Glide Poly Armchair SOLA Upholstered Seat and Back Armless SOLU l l l l l A B C D E HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select frame color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal ND = Nordic TO = Tangelo SU = Sunburst LC = Lemon Cream C D WS = Wet Sand CM = Champagne Metallic SX = Starlight Silver Metallic ZM = Bronze Metallic NK = Nickel Vein AV = Antique Vein CH = Chrome Select seat/back color. SBL = Black SWG = Warm Grey SWI = Wine SNV = Navy SMY = Mustard Yellow Select tube/endcap color. ABL = Black AWG = Warm Grey AWI = Wine ANV = Navy AMY = Mustard Yellow D Select glide option. PG = Black Plastic SG = Steel Chrome Select upholstery fabric. Cards are available online and by request. 114
STACKING/CLASSROOM SEATING Solitude LIST PRICES List Price $294 323 437 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 115
Solitude STACKING/CLASSROOM SEATING MODEL NUMBER Basic Model Upholstered Seat and Back Arm Chair SOLUA Frame Color Seat/Back Color Tube/EndC ap Color Glide Dolly SILD l l l l l A B C D E HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select frame color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait GX = Grape MZ = Moss BD = Bordeaux CY = Cayenne AC = Abracadabra FN = Flannel SH = Splash MR = Marine Teal ND = Nordic TO = Tangelo SU = Sunburst LC = Lemon Cream C D WS = Wet Sand CM = Champagne Metallic SX = Starlight Silver Metallic ZM = Bronze Metallic NK = Nickel Vein AV = Antique Vein CH = Chrome Select seat/back color. SBL = Black SWG = Warm Grey SWI = Wine SNV = Navy SMY = Mustard Yellow Select tube/endcap color. ABL = Black AWG = Warm Grey AWI = Wine ANV = Navy AMY = Mustard Yellow D Select glide option. PG = Black Plastic SG = Steel Chrome Select upholstery fabric. Cards are available online and by request. 116
STACKING/CLASSROOM SEATING Solitude LIST PRICES List Price $466 665 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 117
Ultralite Specifications STACKING/CLASSROOM SEATING Overall Height 33 3 /8 Total Width 18 1 /2 Most forward point to most rearward point 21 7 /8 UltraLite's molded folding chair provides the best blend of lightweight with increased durability. 1-1/8" chair frame provides required strength to support users. Designed with a pleasing appearance, these chairs are available with a light grey surface and grey powder-coated painted leg. Sold in Sets of 4 118
STACKING/CLASSROOM SEATING Ultralite MODEL NUMBER Basic Model List Price Folding Chair - Set of 4 ULFC-4-000 $339 l A HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 119
Versa Conference Specifications ERGONOMIC SEATING SPECIFICATIONS Armchair Armless Seat Width 17 3/4 17 1 /2 Seat Depth 19 1 /2 19 1 /2 Seat Height 17 1 /2 17 1 /2 Overall Height 32 3 /4 32 3 /4 Overall Width 20-24 20-24 Overall Depth 23.875 23.875 Arms Height 25.625 Frame Frame of tubular steel. Kick back rear legs increase structural integrity and add to stability. Chrome plated steel glides. Upholstered Seat 1-1/2 thick polyfoam seat cushion. 120
ERGONOMIC SEATING SPECIFICATIONS Versa Conference MODEL NUMBER Basic Model Frame Color Glides List Price Steel Glide Upholstered Arm Chair VCWAL $471 $471 VCWAG 481 481 Chrome Glide Upholstered Armless Chair VCNAL 448 448 Sled Base Armless VCNAS 449 429 Sled Base Armchair VCWAS 471 451 VCWASG 471 451 l l l A B C HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select frame color. BL = Black WG = Warm Grey GR = Blue Grey SA = Sand LG = Light Tone CF = Cafe au Lait MZ = Moss FN = Flannel ND = Nordic LC = Lemon Cream WS = Wet Sand NK = Nickel Vein AV = Antique Vein CH = Chrome Select upholstery fabric. Cards are available online and by request. D Select glide option. P = Plastic S = Steel Chrome 121
Utility Specifications INSTITUTIONAL SEATING ND1301 Width 17 Depth 21.875 Height 32 Seat Height 16 Utility Utility stacking chair has tubular steel frame, padded seat and backrest. Seat and backrest are upholstered in customer's choice of fabric. Designed for economical, comfortable seating of large groups. Stacks 10 high. 122
INSTITUTIONAL SEATING Utility Specifications 123
Utility INSTITUTIONAL SEATING MODEL NUMBER Utility Stacking Basic Model ND-1301 Color l A l C HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select color. UTILITY BL = Black WG = Warm Grey GR = Blue Grey SA = Sand NG = Nutmeg 124
Utility INSTITUTIONAL SEATING LIST PRICES Utility $168 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 125
Pride (Engage) QUICK SHIP SEATING MODEL NUMBER Basic Model Arms Casters Frame Poly Back QS-ENGP CC BL Upholstered Back QS-ENGU CC BL l l l A B C D HOW TO ORDER Indicate the following information on order form: 1. Quantity of each item. 2. Model number, including options. See How to Build a Model Number. 3. Any special service required. Note: The indicates that a choice is required. The absence of indicates that no choice is required. Alpha-numeric characters in place of indicate that no other alternatives are available. HOW TO BUILD A MODEL NUMBER A Select basic model. B Select arm option. NA = Armless FA = Fixed Arms HA = Height Adjustable Arms AA = Adjustable Arms C D Select caster option. CC = Carpet Casters Select frame color. BL = Black * Fabric - Foundation Only. Select upholstery fabric, Foundation Only. Cards are available online and by request. MAX. ORDER QUANTITY: 6 chairs. Order by 11am Monday through Friday. (Orders received after 11am will be entered the next business day.) Chairs will ship statewide from our dock within 48 hours via BSI, UPS, or Madison Freight. 126
QUICK SHIP SEATING Pride (Engage) LIST PRICES Arms Armless Fixed Arms Height Adjustable Adjustable $661 $787 $835 867 702 828 876 908 SPECIAL SERVICES PRICING INFORMATION Prices shown are List Prices Standard Discount Method for Products in this Price List for all BSI Customers: 56% Discount for Product Only For dock delivery add 5% of net price. For installation add an additional 8% of net price. SHIPPING Packing/Shipping shall be at the discretion of BSI and is dependent upon sizes and quantities in each order. Specifications and prices may be subject to change without prior notice. Color Swatches are available on pages 128-129. Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 127
Stain COLORS San Marco Stains Natural Cherry Frame COLORS Black Warm Grey Blue Grey Sand Light Tone Cafe au Lait Grape Moss Bordeaux Cayenne Abracadabra Flannel Splash Marine Teal Nordic Tangelo Sunburst Lemon Cream Wet Sand Champagne Metallic Starlight Sliver Metallic Bronze Metallic Nickel Vein Antique Vein Chrome Nutmeg Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 128
COLORS Poly Black Warm Grey Blue Grey Sand Light Tone Cafe au Lait Grape Moss Bordeaux Cayenne Abracadabra Flannel Splash Marine Teal Nordic Tangelo Sunburst Lemon Cream Wet Sand Wine Navy Mustard Yellow Colors are reproduced as accurately as possible. If you have concerns please contact a sales representative. 129
Name Structural Integrity WARRANTY INFORMATION Cylinder Tilt Casters Foam Fabric Sapphire 2 2 2 2 1 1 Snap 2 2 2 2 1 1 1860 10 7 5 5 1 1 2600 10 7 5 5 1 1 Breathe 5 5 5 5 1 1 CXO & CXO-HD 10 7 5 5 1 1 Euro 10 7 5 5 1 1 Ithaca 5 5 5 1 1 1 Ithaca Ultra 5 5 5 1 1 1 LXO 10 7 5 5 1 1 Pride (Engage) 10 7 5 5 1 1 San Marco 10 7 5 5 1 1 Sterling 2 5 5 5 5 1 1 Pilot 247 5 5 5 5 1 1 Cricket 5 N/A N/A N/A N/A N/A 247-HD 5 5 5 5 1 1 Lounge 5 N/A N/A N/A 1 1 Navigator 5 N/A N/A 1 1 1 Revelation 5 N/A N/A N/A 1 1 Scandinavian 5 N/A N/A N/A 1 1 Sophic 5 N/A N/A N/A 1 1 1060 5 N/A N/A N/A 1 1 Advise 5 N/A N/A N/A 1 1 Alta 5 N/A N/A N/A 1 1 Cheyenne 10 N/A N/A N/A 1 1 Dakota 10 N/A N/A N/A 1 1 Piper 5 N/A N/A N/A N/A N/A Solitude 5 N/A N/A N/A 1 1 UltraLite 5 N/A N/A N/A N/A N/A Versa Conference 5 N/A N/A N/A 1 1 Utility 5 N/A N/A N/A 1 1 Quick Ship Pride 10 7 5 5 1 1 130
GLIDE GUIDE Glide/Caster Type Floor Type Rating Carpet Casters Carpet Best Soft Casters Plastic Glide Steel Chrome Glide No Glides Non Skid PVC Glides Poly Glides Steel Glides Polycarb Glides Stainless Steel Glides Vinyl Hard Wood Concrete Ceramic Tile Marble Carpet w/mat Vinyl Hard Wood Concrete Ceramic Tile Marble Carpet Vinyl Hard Wood Concrete Ceramic Tile Marble Carpet Vinyl Hard Wood Concrete Ceramic Tile Marble Carpet Vinyl Hard Wood Concrete Ceramic Tile Marble Carpet Vinyl Hard Wood Concrete Ceramic Tile Marble Carpet Vinyl Hard Wood Concrete Ceramic Tile Marble Carpet Vinyl Hard Wood Concrete Ceramic Tile Marble Carpet Vinyl Hard Wood Concrete Ceramic Tile Marble Carpet Best Best Best Best Best Best Not Recommended Not Recommended Not Recommended Best Not Recommended Best Good Good Not Recommended Best Not Recommended Best Not Recommended Not Recommended Not Recommended Not Recommended Not Recommended Best (Chrome frame only) Best Best Best Best Good Not Recommended Good Not Recommended Best Best Not Recommended Good Good Good Not Recommended Best Not Recommended Good Not Recommended Not Recommended Not Recommended Best Not Recommended Best Not Recommended Good Good Good Not Recommended Best 131
SEATING AT A GLANCE Product Line Page Number High Back Mid Back Low Back Task Stool Side Chair Syncro Tilt Knee Tilt Synch Knee Tilt Asynch Tilt 24 Hr. Tilt Head Rest Seat Depth Adj. Arms Loop Arms Usage* Weight Limit Ergonomic Light Duty Sapphire 2 X X X S 200 lbs Snap 4 X X X X S 200 lbs Ergonomic Standard Duty 1860 8 X X X X X X X X S 250 lbs 2600 12 X X X X S 250 lbs Breathe 16 X X X X X X S 250 lbs CXO 20 X X X X X S 300 lbs CXO-HD 20 X X X X X M 450 lbs Euro 24 X X X X X X X X S 250 lbs Ithaca 28 X X X X X X X S 250 lbs Ithaca Ultra 32 X X X X X X X X X X S 250 lbs LXO 36 X X X X S 250 lbs Pride (Engage) 38 X X X X X X S 250 lbs San Marco 42 X X X X X S 300 lbs Sterling 2 44 X X X X X X X X X S 250 lbs Ergonomic Heavy Duty Pilot 50 X X X X X M 450 lbs 247-HD 52 X X X X X M 450 lbs *S = Single 8 Hour Shifts *M = Multiple Shift Product Line Page Number Lounge Side Classroom Food Service Tablet Arm Poly Upholstered Stacks Gangs Nest/ Wheels Folding Advise 54 X X X Cricket 68 X X X X Lounge 70 X X Navigator 72 X X X X X X Revelation 76 X X X X X X Scandinavian 82 X X X Sophic 86 X X X 1060 88 X X X X Alta 56 X X X X X X X X X Cheyenne 92 X X X X X X X X Dakota 100 X X X X X X X X Piper 108 X X X X X X Solitude 112 X X X X X X Ultralite 118 X X X X Versa Confernce 120 X X X X X Utility 122 X X X X X 132
ORDERING INSTRUCTIONS You must be a registered buyer to shop online at www.buybsi.com. To register go to www.buybsi.com/registration.html. While shopping with BSI you must register if you intend to use your P-card on any order or if you would like to view pricing via our website. If you would just like to browse our catalogs please visit us at www.buybsi.com/ataglance.html. Here you can look at brochures as well as some comparison pages. You will not be able to view any pricing, however, unless you register with us. Introduction to Registration Since Badger State Industries' market is restricted by state statute, customers must qualify and register to purchase on-line. Buyer registration is a one-time only process. At registration each customer creates their own Buyer ID and password and submits their primary 'Bill to' and 'Ship to' addresses. Additional 'Bill to' and 'Ship to' addresses may also be entered when appropriate. This information is reviewed by BSI staff who then will review the data submitted and confirm or deny the request. The system will facilitate buyers with single billing and shipping addresses as well as those requiring multiple'bill to' and/or'ship to' addresses. And some buyers can be authorized to enter new addresses at the time of purchasing. If you have questions as to how to complete the form, click on the line item description to bring up helpful information. Thanks for registering. The registration process is approximately 24 hours. You will receive an email letting you know when your registration is approved. Once you receive approval you may in to shop. IMPORTANT NOTE: IF AN INDIVIDUAL CHANGES AGENCIES, THEY MUST RE-REGISTER WITH THE NEW AGENCY'S INFORMATION. Please note: To successfully view and shop online at www.buybsi.com customers must use Internet Explorer. Go Configure Here s How: Enter the Site 1 Go to www.buybsi.com and click on Products and Services (Online Shopping) 2 A screen will appear asking for your Buyer ID, Enter it at that time. Product Choices 3 Select the Product Group you want. 4 Select the Product that interests you. 133
ORDERING INSTRUCTIONS Go Configure 5 Choose a product 6 and select features and options 7 Click Configure Product Your Cart 8 The system will configure a part number and a price. Once the product is configured the way you want, click Add to Cart. ABCD 9 You will then be prompted to give your cart a name. You can name your cart whatever you would like. 10 Once you have everything in your cart then save your cart or click move to checkout. Checkout ABCD 11 You will then be prompted to enter your password. At this time you also need to select the cart you wish to checkout from the drop down list 12 Complete all your cart information: Bill to, Ship to, Contact, Etc. When you have reviewed it, then click Submit Order. Your order will not be complete until you click on the submit button. After you have completed your order this page will appear. 134
YARDAGE CHART Model Number Yardage Model Number Yardage 1861 2.00 Pilot 2.00 1865 2.00 Piper 1.00 2600 2.00 Revelation 1.00 1201 6.00 Revalation (Seat Only) 1.00 1202 9.00 San Marco Executive 3.00 1203 13.00 San Marco Midback/Side 2.00 Advise 1.00 Sapphire 1.00 Alta & Alta Plus 1.00 SC1000 1.00 Breathe w/headrest 1.00 SC1200 3.00 Breathe without Headrest 1.00 SC1300 4.50 Cheyenne 1.00 SC5200/SC5201 1.00 CXO & CXO-HD 1.00 Snap Highback 1.00 Dakota 1.00 Snap Midback 1.00 Engage Poly Back 1.00 Snap Lowback/Stool 1.00 Engage Upholstered Back 2.00 Solitude 1.00 Euro Executive 2.50 Sophic 2.00 Euro Midback/Lowback 2.00 Sorrento Tub Chair 5.00 Ithaca 2.00 Sterling 2 Highback 2.00 Ithaca Ultra 1.00 Sterling 2 2.00 LXO 1.00 Utility 1.00 Navigator 1.00 247-HD 3.00 Navigator (Seat Only) 1.00 135
MAKING A DIFFERENCE Buying from BSI can make a real difference. You are supporting Wisconsin companies, which add to the tax base and employ our taxpaying citizens. You are helping save taxpayer money through promotion of successful reintegration of offenders into our communities. You are promoting environmental responsibility through the use of green products and development of alternative fuels. Revenues earned are reinvested in recycling initiatives to keep our landfills safe of pollutants. Revenues are used to develop meaningful vocational programs for training inmates for release. You are helping us make our institutions safer by reducing inmate idleness. Low Prices! It s Quick and Easy! One stop shopping for a wide variety of quality products. Showroom and Business Office 3099 East Washington Ave.. Madison, Wisconsin 53704 PHONE: 608-240-5200 FAX: 608-240-3321 TOLL FREE: 800-862-1086 Web site: www.buybsi.com