IEC and ritish Standard fuses 5 Contents ussmann series IEC cylindrical fuses Complete portfolio of 8-22 mm diameter Class am and Class gg cylindrical fuses for industrial applications escription Fuses Section page CSA Type P and fuses (CN, CS and PON) 2 HRC Form II Class C fuses (CGL) 3 HRCI industrial ceramic body fuses HRCI-CA (CIF2) HRCI-C (CIF06) HRCI-Misc. Type K (CIH, CIK and CIL) 5 HRC Form II current-limiting fuses (H07C, K07C, L4C, M4C, L09C, M09C, P09C, PC, RC) S88 Part fuses S88 SS, NS, ES ST, NIT, AAO, AO, OS, CEO, EO AC, A, C,, C,, E, EFS EF, FF, FG, GF, GG, GH IN Type iazed (6, 27, 33, 25) IN Type N Neozed (NZ0, NZ02) NH HRC fuses (NHG) 0- JKS-700 fast-acting, current limiting UL Recognized and CSA Component Acceptance 700 Vac fuses up to 60 amps NH fuse blocks and accessories (S, T) 2 Fuses continued IEC 60269 industrial fuses with and without indicator/striker Class gg ferrule (C0G, C4G, C22G) 3 Class am ferrule (C0M, C4M, C22M) 4 HRC fuse holders CAMaster SAFEloc Red Spot 4 6 7 8 9 5 IEC and ritish Standard fuses USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-
5 IEC and ritish Standard fuses CN, CS and PON CSA Type P and fuses CSA time-delay Type and P fuses. imensions in (mm) A 250 Vac (CN and PON) 600 Vac (CS) Up to 60 A C A Amps 0-600 A F IR 0 ka minimum 70 to 600 A E CSA Certified, Class 42-0, File 53787, CE Features Economical fuse in a variety of ratings for applications not requiring time-delay Typical applications Lighting, heating and other circuits not subject to temporary surges and where available short-circuit current are relatively low * Catalog symbol Available amp ratings Time-elay CSA Type "" fuses CN** CS 250 Vac 600 Vac One-time CSA Type "P" fuses 0, 2, 5, 20, 25, 30, 35, 40, 45, 50, 60, 70,, 90, 00, 0, 25, 50, 75, 200, 225, 250, 300, 350, 400, 450, 500, 600 0, 2, 5, 20, 25, 30, 35, 40, 45, 50, 60, 70,, 90, 00, 0, 25, 50,75, 200, 225, 250, 300, 350, 400, 450, 500, 600 PON 250 Vac 5, 20, 25, 30, 35, 40, 45, 50, 60 * To order, specify catalog symbol and amp rating, e.g., CN30, CS0 or PON40. ** elow 0 amps, use FRN-R. elow 0 amps, use FRS-R. Amps A C E F CN/PON 250 Vac Up to 30 2.0 (5) 0.6 (4) 35-60 3.0 (76) 0.8 (2) 70-00 5.9 (49).0 (25) 0. (3) 0.8 (9) 0-200 7.3 (85).4 (35) 4. (05) 0.2 (5). (29) 225-400 8.6 (29).9 (48) 4.6 (8) 0.3 (6).6 (4) 450-600 0.4 (264) 2.3 (57) 5.2 (32) 0.3 (6) 2 (5) CS 600 Vac Up to 30 5.0 (27) 0.8 (2) 35-60 5.5 (40). (27) 70-00 7.9 (200).0 (25) 0. (3) 0.8 (9) 0-200 9.6 (245).4 (35) 6. (6) 0.2 (5). (29) 225-400.6 (295).9 (48) 7. (8) 0.3 (6).6 (4) 450-600 3.4 (340) 2.3 (57) 8.2 (208) 0.3 (6) 2 (5) Recommended fuse blocks * Fuse amps 250 600 Up to 30 HM25030-(poles) HM60030-(poles) 35-60 HM25060-(poles) HM60060-(poles) 70-00 HM2500-(poles) HM6000-(poles) 0-200 HM25200-(poles) HM60200-(poles) 225-400 HM25400-(poles) HM60400-(poles) 450-600 HM25600-(poles) HM60600-(poles) * To order, specify, 2 or 3 poles, e.g., HM25030-2_. See data sheets 0289 (30-60 A) and 392 (70-600 A) for available terminals. ata sheet no. 426 5-2 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries
IEC and ritish Standard fuses 5 CGL HRC Form II Class C fuses Current-limiting HRCII-C fuses designed to withstand inrush currents on typical motor start-ups while offering high current limitation in the short-circuit region. See drawings for dimensions. 600 Vac 250 Vdc (-30 A) Amps -600 A IR 200 ka 40 ka C CSA Certified, Class 422,File 53787, CE (amps) CGL- CGL-25 CGL- CGL-225 CGL-2 CGL-30 CGL-90 CGL-250 CGL-3 CGL-35 CGL-00 CGL-300 CGL-4 CGL-40 CGL-0 CGL-350 CGL-6 CGL-45 CGL-25 CGL-400 CGL-0 CGL-50 CGL-50 CGL-450 CGL-5 CGL-60 CGL-75 CGL-500 CGL-20 CGL-70 CGL-200 CGL-600 Features imensions in (mm) CGL -30 0.22 (5.56) CGL 35-60 2.0 (50.8) 2. (7.04) 3.3 (84.4) 0.22 (5.56) 2.0 (50.8) 2. (7.04) 3.5 (88.9) 0.343 (8.7) CGL 70-00 0.22 (5.56) 0.22 (5.56) 2.39 (60.72) 3.64 (92.47) 4.3 (09.54) 0.343 (8.7) CGL 0-200 0.38 (9.53) 3.00 (76.2) 4.30 (09.22) 5.3 (34.87) 0.34 (8.73) 0.343 (8.7) 0.8 (20.64) 0.50 (2.7) 0.8 (20.64) 0.75 (9.05) 0.343 (8.7).34 (34.04) 0.06 (.59) 0.94 (23.8) 0.75 (9.05) 0.06 (.59).06 (26.92) 0.09 (2.29).375 (34.93).50 (38.).0 (25.4) 0.25 (3.8) 0.9 (4.76) IEC and ritish Standard fuses Close sizing to loads allows using smaller and less costly switches Provides a higher degree of short-circuit protection Helps protect motors against burnout from overloads Typical applications CGL 225-400 3.0 (76.2) 5.25 (33.35) 8.9 (207.96).0 (25.4) 2.38 (60.33) For use in circuits subject to surge currents such as those caused by motors, transformers and other inductive loads Available Red Spot fuse holders 0.4 (0.32).0 (25.4) Fuse amps Up to 32 Catalog symbol* RS32_ 35-60 RS63_ 70-00 RS00_ 0-200 RS200_ CGL 450-600.0 (25.4) 3.0 (76.2) 5.25 (33.35) 8.9 (207.96) 0.60 (5.24) 0.375 (9.53) 3.00 (76.2) 225-400 RS400_ * See Red Spot data sheet no. 0083 for terminal options. ata sheet no. 425 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-3
5 IEC and ritish Standard fuses CIF2 HRCI-CA industrial ceramic body fuses The HRCI-CA bolt-on, ceramic body fuse provides both overload and short-circuit protection to HRCI requirements. Offset blades for bolt-on mounting CIF2 fuse fits the ussmann series Red Spot fuse holder (data sheet 0083) and CAMaster fuse holder (data sheet number 432). 600 Vac 250 Vdc Amps -30 A IR 200 ka RMS Sym. CSA, Class 422-02, File 53787, CE Amps Amps CIF2 5CIF2 5 3CIF2 3 20CIF2 20 6CIF2 6 25CIF2 25 0CIF2 0 30CIF2 30 Features Close sizing to loads allows using smaller and less costly switches Provides a higher degree of short-circuit protection Helps protect motors against burnout from overloads Typical applications For use in circuits subject to surge currents such as those caused by motors, transformers and other inductive loads Recommended fuse holders Amps escription * Up to 20 Red Spot RS20_(terminal option) Up to 30 CAMaster CM20CF * See data sheet no. 0083 (Red Spot) and 432 (CAMaster) for details. imensions in (mm) CIF06 HRCI-C industrial ceramic body fuses A miniature offset clip-in blade, ceramic body industrial fuse that provides both short-circuit and overload protection and the CIF06 fits the 30 A SAFEloc fuse holder (data sheet number 433). 600 Vac 250 Vdc Amps -30 A IR 200 ka RMS Sym. CSA, Class 422-02, File 53787 (3-30 A only), CE Amps Amps CIF06 5CIF06 5 3CIF06 3 20CIF06 20 6CIF06 6 25CIF06 25 0CIF06 0 30CIF06 30 Features Close sizing to loads allows using smaller and less costly switches Provides a higher degree of short-circuit protection Helps protect motors against burnout from overloads Typical applications For use in circuits subject to surge currents such as those caused by motors, transformers and other inductive loads Recommended fuse holders Amps escription * Up to 30 SAFEloc C30(terminal option) * See data sheet no. 433 for SAFEloc details. imensions in (mm) 2.38 (60).44 (36) 2.5 (55).44 (36) 0.54 (4) 0.5 (3) 0.54 (4) 0.9 (5) 0.44 () 0.4 (4) 0.03 (4).75 (45) 0.03 () ata sheet no. 427 ata sheet no. 428 5-4 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries
IEC and ritish Standard fuses 5 CIH, CIK and CIL HRCI Misc. Type K fuses Misc. Type K HRCI bolt-on, ceramic body fuses provide both overload and short-circuit protection, featuring offset blades for bolt down mounting. 600 V Amps -00 A IR 200 ka@600 V CSA, Class 422-02, File 53787, CE (amp)cih, CIK, CIL CIH07 5CIH07 35CIK07 CIL4 3CIH07 20CIH07 40CIK07 90CIL4 6CIH07 25CIH07 50CIK07 00CIL4 0CIH07 30CIH07 60CIK07 imensions in (mm) The CIL4 has a rejection hole, not a slot as shown above. Amps A C E F G H J K L Up to 30 35-60 K 2.25 (57) 2.28 (58) -00 2.75 (70) 0.94 (24).06 (27).44 (37) 3.38 (86) 3.56 (9) 4.38 () F A L C 0.38 (0) 0.5 (3) 0.75 (9) 0.04 () 0.05 () 0.09 (3) H 2.88 (73) 2.88 (73) 3.69 (94) G G 0.2 (5) 0.2 (5) 0.34 (9) J E 0.3 (8) 0.4 () 0.4 () (25).09 (28).5 (39) 0.0 (3) 0.3 (3) 2.38 (60) 2.38 (6) 2.9 (74) IEC and ritish Standard fuses Recommended fuse holders Amps Red Spot* CAMaster* Up to 30 RS32_ CM30CF 35-60 RS63_ CM60CF -00 RS00_ * See data sheet no. 0083 (Red Spot) and 432 (CAMaster) for details. ata sheet no. 430 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-5
5 IEC and ritish Standard fuses HRC Form II current-limiting fuses HRC Form II bolt-on, ceramic body current-limiting fuses. 600 Vac (or less) 250 Vdc imensions in (mm) G G F A H C H07C offset blades F A E E J J Amps 2-600 A IR 200 ka RMS Sym. H C K07C, K07CR, L4C, M4C offset blades CSA, Class 422-02, File 53787, S88:2, IEC 60269:2, CE G H C A (amps) catalog no. H07C offset blades 2H07C 6H07C 5H07C 25H07C 4H07C 0H07C 20H07C 30H07C K07C offset blades 40K07C 60K07C 00K07CR 50K07C L4C offset blades L4C M4C offset blades K07CR 00L4C 25M4C* 50M4C* 200M4C* L09C center blades L09C* M09C center blades 00L09C* 25M09C 50M09C 200M09C P09C center blades 250P09C* 300P09C* 350P09C* 400P09C* PC center blades 250PC 300PC 350PC 400PC RC center blades 450RC 500RC 600RC * Not suitable for installation in Red Spot fuse holders. Typical applications Used to protect motor control circuits, together with contactors and overload protection relays to provide Type 2 coordination per IEC 60947-4. Recommended fuse holders: Red Spot up to 400 amps (data sheet no.0083) and CAMaster up to 00 amps (data sheet no. 432). G L09C, M09C, P09C center blades K F F A C PC, RC center blades Catalog symbol/ style A C E F G H J K H K E E CSA category H07C offset blades.38 0.56 3.38 0.38 0.06 2.88 0.22 0.3 0.56 2-30 HRCII-C (35) (4) (85) (9) () (73) (6) (8) (4) K07C offset blades 2.9 0.88 3.44 0.5 0.06 2.88 0.22 0.3 0.88 40-60 HRCII-C (56) (22) (87) (3) () (73) (6) (8) (22) 2.9 0.88 3.75 0.5 0.06 2.88 0.22 0.3 0.88-00 HRCII- (56) (22) (95) (3) () (73) (6) (8) (22) MISC L4C offset blades 2.38 0.88 4.38 0.56 0.3 3.69 0.34 0.44-00 HRCII-C (60) (2) () (4) (3) (94) (9) () (25) M4C offset blades 2.56.5 4.38 0.75 0.09 3.69 0.34 0.44 25-200 HRCII- (65) (38) () (9) (2) (94) (9) () MISC L09C center blades 2.38 0.88 5 0.56 0.3 4.38 0.34 0.44-00 HRCII- (60) (2) (27) (4) (3) () (9) () MISC M09C center blades 2.56.5 5.38 0.75 0.3 4.38 0.34 0.56 25-200 HRCII-C (65) (38) (36) (9) (3) () (9) (4) P09C center blades 3.06 2.3 5.38 0.9 4.38 0.34 0.5 250-400 HRCII- (78) (59) (36) (25) (5) () (9) (3) MISC PC center blades 3.06 2.3 8.25 0.9 5.25 0.4 0.63 250-400 HRCII-C (78) (59) (20) (25) (5) (33) (0) (6) (25) RC center blades 3.9 2.88 8.25 0.25 5.25 0.4 0.63 450-600 HRCII-C (8) (73) (20) (25) (6) (33) (0) (6) (25) ata sheet no. 43 5-6 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries
IEC and ritish Standard fuses 5 SS, NS, ES S88 Part fuses The NS and ES are low voltage offset blade, ceramic body fuses complying with general purpose gg characteristics. 240-550 Vac Amps 2-63 A 20M25 to 63M00 motor starter ratings IR 33 ka (SS) ka (NS, ES) Meets the requirements of S88 Part and IEC 60269-, CE * Catalog symbol Amps (class) Max Vac S88 ref. SS 2, 4, 6, 0, 6, 20, 25, 32 (gg) 240 E NS 20M25, 20M32, 20M36, 32M36, 32M40, 32M50, 32M63 (gm) 45 2, 4, 6, 0, 6, 20, 25, 32 (gg) 550 ES 40, 50, 63 (gg) 63M, 63M00 (gm) 45 2, 4, 6, 0, 6, 20, 25, 32 (gg) 550 * To order, specify catalog symbol and amp rating, e.g., SS20. "M" indicates motor starter ratings. Recommended fuse holders Fuse symbol NS ES 32NNSF 63ENSF F F2 ST, NIT, AAO, AO, OS, CEO, EO S88 Part fuses The ST to EO type ceramic body, offset bolt-on blade low voltage fuses complying with general purpose gg characteristics. 240-550 Vac Amps 2-200 A 20M25 to 200M35 motor starter ratings IR 33 ka (ST) ka (NIT, AAO, AO, CEO, EO, OS) Meets the requirements of S88 Part and IEC 60269-, CE * Catalog symbol Amps (class) Max Vac S88 ref. ST 2, 4, 6, 0, 6, 20, 25, 32 (gg) 240 NIT 2, 4, 6, 0, 6, 20, 25, 32 (gg) 20M25, 20M32 (gm) 550 32M40, 32M50, 32M63 (gm) 45 AAO 2, 4, 6, 0, 6, 20, 25, 32, (gg) 550 32M40, 32M50, 32M63 (gm) 500 AO 40, 50, 63 (gg) 63M, 63M00 (gm) 32, 40, 50, 63,, 00 (gg) 550 CEO 00M25, 00M60, 00M200 (gm) 45 EO 25, 60, 200 (gg) 200M35 (gm) OS, 00 (gg) 500 00M25, 00M60 (gm) 45 * To order, specify basic catalog symbol and amp rating. E.g., AO6. "M" indicates motor starter ratings. A2 500 A3 A4 45 IEC and ritish Standard fuses Typical applications The ST type are used in 240 V street lighting cut-outs NIT to EO types used for industrial and general purpose applications Recommended fuse blocks and holders Fuse catalog symbol NIT AAO AO OS CEO lock/holder catalog no.* CM32FC, RS20_ CM32F, RS32_ CM63F, RS63_ CM00F, RS00_ H-0 * See data sheet no. 432 (CM_), 0083 (RS_) and 200 (H-_). ata sheet no. 405 (SS), 400 (NS) and 40 (ES) ata sheet no. 423 (ST), 406 (NIT), 409 (AAO), 42 (AO), 407 (OS), 45 (CEO) and 47 (EO) USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-7
5 IEC and ritish Standard fuses AC, A, C,, C,, E, EFS S88 fuses Ceramic body, center blade two-hole bolt-on low voltage fuses that comply with general purpose gg characteristics and available up to 400 amps with two hole mount and up to 250 amps with four hole mount. 45/550 Vac 250 Vdc Amps 2-400 A 63M to 400M500 motor starter ratings IR see catalog numbers table Meets the requirements of S88 Parts and 2 and IEC 60269-, CE * IR ( ka) Max volts Catalog symbol Amps (class) AC C AC C AC A C S88 ref. 2, 4, 6, 0, 6, 20 (gg) 550 40 250 25, 32 (gg) 500 2, 4, 6, 0, 6, 20 (gg) 550 40 250 25, 32 (gg) 500 40, 50, 63 (gg) 63M, 63M00 (gm) 40 500 250 40, 50, 63 (gg) 40 500 250 C E EFS C, C00 (gg) 00M25, 00M60, 00M200 (gm) 25, 60, 200 (gg) 200M250, 200M35 (gm) 250, 35, 355, 400 (gg) 35M400 (gm) 500 45 45 2 45 400M500 (gm) 550 25, 60, 200, 250, 35 (gg) * To order, specify catalog symbol and amp rating. E.g., C40. "M" indicates motor starter ratings. 3 4 45 EF, FF, FG, GF, GG, GH S88 fuses Ceramic body, center blade four-hole bolt-on low voltage fuses complying with general purpose gg characteristics and available up to 400 amps with two hole mount and up to 250 amps with four hole mount. (see catalog numbers table) 45/690 Vac 250/400 Vdc Amps 355-250 A IR see catalog numbers table Meets the requirements of S88 Parts and 2 and IEC 60269-, CE * IR ( ka) Max volts Catalog symbol Amps (class) AC C AC C EF 355, 400 (gg) 45 40 400M500 (gm) 550 S88 ref. C FF 450, 500, 560, 630 (gg) 40 550 400 C2 FG 450, 500, 560, 630 (gg) 40 550 400 GF 70, 0 (gg) 40 550 250 C3 GG 70, 0 (gg) 40 250 550 000, 250 (gg) GH 70, 0, 000, 250 550 * To order, specify catalog symbol and amp rating, e.g., FG450. "M" indicates motor starter ratings. Recommended fuse blocks Fuse catalog symbol Modular block catalog no.* AC H-0 A H- C H-0 H- C H- H- E H-3 * See data sheet no. 200 (H-0_) and 20 (H-_) for details. ata sheets no. 40 (AC), 4 (A), 43 (C), 44 (), 46 (C), 48 (), 49 (E) and 42 (EFS) ata sheet no. 420 (EF), 402 (FF), 422 (FG), 403 (GF), 404 (GG) and 408 (GH) 5-8 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries
IEC and ritish Standard fuses 5 6, 27, 33, 25 IN Type iazed fuses IN style Type ceramic body low voltage fuses. 500 Vac Amps 2-00 A IR 50 ka IEC 60269 and IN 4955, CE NZ0, NZ02 IN Type N Neozed fuses IN style Type N ceramic body low voltage. 400 Vac Amps 2-63 A IR 50 ka IEC 60269 and IN 4955, CE Amps "" dimension Color code Fig. 26 2 6 Pink 46 4 6 rown 66 6 6 Green 06 0 8 Red 66 6 0 Grey 206 20 2 lue 256 25 4 Yellow 227 2 6 Pink 427 4 6 rown 627 6 6 Green 027 0 8 Red 627 6 0 Grey 2027 20 2 lue 2527 25 4 Yellow 3533 35 6 lack 5033 50 8 White 6333 63 20 Copper 25 5 Silver 0025 00 7 Red Additional 500 V quick acting fuses in body sizes 6, 27, 33 and 25 rated 2-00 A. Reference number suffixed "Q." E.g., 027Q. Gauge rings and keys can also be supplied. 2 3 4 Amps "" dimension Color code 2NZ0 2 Pink 4NZ0 4 rown 6NZ0 6 Green 0NZ0 0 Red 6NZ0 6 Grey 20NZ02 20 5 lue 25NZ02 25 5 Yellow 35NZ02 35 5 lack 50NZ02 50 5 White 63NZ02 63 5 Copper imensions mm 36 IEC and ritish Standard fuses imensions mm 3.2 2.5 27.5 33.5 50 50 50 57 Fig. Fig. 2 Fig. 3 Fig. 4 ata sheet no. 424 ata sheet no. 424 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-9
5 IEC and ritish Standard fuses NHG NH HRC fuses IN 000 to 4 Class: gg/gl IN square bodied, dual indication industrial fuses with voltage conducting metal gripping lugs. They are made of a steatite insulator, corrosion-proof (aluminum) metal parts with full-contact and silver-plated copper blades. All NHG fuses feature a selectivity ratio: :.6 up to 500 Vac. 500 Vac 690 Vac Amps 2-250 A IR 20 ka Frequency 45-62 Hz operating IEC 60269, VE 0636, IN 43620 CE (500 Vac only) imensions mm Fuse size a a 2 a 3 a 4 b c c 2 e e 2 e 3 e 4 f 000 79 54 45 49 5 35 0 2 4 2 6 6 8 00 79 54 45 49 5 35 7.0 48 30 25 6 5 0 25 68 62 68 5 35 2.5 48 30 25 6 5 0 35 75 62 68 5 40 2.5 48 30 25 6 5 35 75 62 68 20 40 2.5 53 52 25 6 5 02 50 75 62 68 20 48 2.5 53 52 25 6 5 2 50 75 62 68 25 48 2.5 6 60 25 6 5 03 50 75 62 68 25 60 2.5 6 60 25 6 5 3 50 75 62 68 32 60 3.0 75 70 25 6 8 4 200 84 90 50 85 3 20 87 8 30 Recommended fuse blocks lock catalog no. Fuse size S00-000-00 S- *, S2-02, 2, 03, 3 a 4 a 3 a 2 a ata sheet no. 064 (500 V), 72009 (690 V) d b f c 2 c e 3 e 2 e 4 2 min. e NHG NH HRC fuses 500 Vac gg/gl dual indicator voltage conducting metal gripping lugs Amps 000 size 2 2NHG000 4 4NHG000 6 6NHG000 0 0NHG000 6 6NHG000 20 20NHG000 25 25NHG000 32 32NHG000 35 35NHG000 40 40NHG000 50 50NHG000 63 63NHG000 NHG000 00 00NHG000 00 size 50 50NHG00 63 63NHG00 NHG00 00 00NHG00 25 25NHG00 60 60NHG00 0 size 6 6NHG0 0 0NHG0 6 6NHG0 20 20NHG0 25 25NHG0 32 32NHG0 35 35NHG0 40 40NHG0 50 50NHG0 63 63NHG0 NHG0 00 00NHG0 25 25NHG0 60 60NHG0 0 size 6 6NHG0 0 0NHG0 6 6NHG0 20 20NHG0 25 25NHG0 32 32NHG0 35 35NHG0 40 40NHG0 50 50NHG0 63 63NHG0 NHG0 00 00NHG0 25 25NHG0 60 60NHG0 Amps size 50 50NHG 63 63NHG NHG 00 00NHG 25 25NHG 60 60NHG 200 200NHG 224 224NHG 250 250NHG 35 35NHG 355 355NHG 02 size 35 35NHG02 40 40NHG02 50 50NHG02 63 63NHG02 NHG02 00 00NHG02 25 25NHG02 60 60NHG02 200 200NHG02 224 224NHG02 250 250NHG02 2 size 250 250NHG2 300 300NHG2 35 35NHG2 355 355NHG2 400 400NHG2 425 425NHG2 450 450NHG2 500 500NHG2 03 size 250 250NHG03 35 35NHG03 355 355NHG03 400 400NHG03 3 size 35 35NHG3 355 355NHG3 400 400NHG3 425 425NHG3 450 450NHG3 500 500NHG3 630 630NHG3 0 0NHG3 4 size* 500 500NHG4G 630 630NHG4G 0 0NHG4G 000 000NHG4G 250 250NHG4G * Size 4 is a a single indicator fuse with slotted end blades. 5-0 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries
IEC and ritish Standard fuses 5 NHG NH HRC fuses JKS-700 fast-acting fuses 690 Vac gg/gl dual indicator voltage conducting metal gripping lugs Amps 000 size 2 2NHG000-690 4 4NHG000-690 6 6NHG000-690 0 0NHG000-690 6 6NHG000-690 20 20NHG000-690 25 25NHG000-690 32 32NHG000-690 35 35NHG000-690 40 40NHG000-690 50 50NHG000-690 63 63NHG000-690 00 size 50 50NHG00-690 63 63NHG00-690 NHG00-690 00 00NHG00-690 25 25NHG00-690 60* 60NHG00-690 size 50 50NHG-690 63 63NHG-690 NHG-690 00 00NHG-690 25 25NHG-690 60 60NHG-690 200 200NHG-690 224 224NHG-690 250 250NHG-690 Amps 2 size 200 200NHG2-690 224 224NHG2-690 250 250NHG2-690 35 35NHG2-690 3 size 250 250NHG3-690 35 35NHG3-690 355 355NHG3-690 400 400NHG3-690 425 425NHG3-690 500 500NHG3-690 4 size** 630 630NHG4-690 0 0NHG4-690 * 60 amps rated at 660 Vac. ** Size 4 is a single indicator fuse with slotted end blades. The JKS-700 is a fast-acting, current-limiting fuse that is UL Recognized and has CSA Component Acceptance for applications up to 700 Vac. The JKS-700 is available in ratings up to 60 amps with the same dimensions as a standard Class J fuses; but its voltage rating places it outside the standard Class J fuse class. ussmann recommends the JM7000 modular fuse block and the JM7000-MW power distribution fuse block for the 30 amp case size JKS-700 fuses. See page 8-8 for details. 700 Vac (or less) Amps 25-60 A IR Minimum 6I n 200 ka RMS Sym. Operating class ar UL Recognized, 248-3 Semiconductor Fuses, File E5642 CSA Component Acceptance, C22.2 No 248.3 Semiconductor Fuses, Class 422-30 Features Current limitation for non-inductive circuits provides currentlimiting response to maximum ground fault and short-circuit conditions 200 ka interrupting rating provides protection at all circuit locations Economical circuit protection for high-fault current circuits Typical applications Power panelboards up to 700 Vac IEC and ritish Standard fuses Machinery disconnects up to 700 Vac (amps) JKS-25-700 JKS-30-700 JKS-35-700 JKS-60-700 ata sheet no. 064 (500 V), 72009 (690 V) ata sheet no. 026 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-
5 IEC and ritish Standard fuses S_ and T_ NH fuse blocks Shroud kits NH fuse bases feature thermoplastic bodies, and IN-Rail and screw mounting (size 4 is screw fix). They are available with a range of protection accessories for live parts for IP20 protection. 690 Vac 000 Vac (S- only) Amps up to 250 A NH fuse sizes 000 to 4 IEC 60269- and 2 VE 0636- and 2 Typical applications Protecting industrial circuits and electrical apparatus Fuse size Poles Amps IN-Rail or screw mount 00 2 3 Screw mount only Carton qty. S00-3 60 3 T00- S- 3 250 3 T- S2-3 400 3 T2- S3-3 630 3 T3-4 250 S4-S 3 4 Neutrals NH size Amps Carton qty. 250 SL- 3 2 400 SL-2 3 3 630 SL-3 3 Accepts fuse sizes 000 and 00 0 and 02 and 2 03 and 3 Fits fuse block T00-IP20 T00- T-IP20 T- T2-IP20 T2- T3-IP20 T3- S00-SK S00- S2-SK S and S2 S3-SK S3 Phase barrier kits Fits fuse block S00-P S00- S2-P* S and S2 S3-P* S3 * Kits include 2 phase barriers and 2 ganging links. Fuse extraction handle Size Carton qty. C00-3 FEH ata sheet 063 5-2 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries
IEC and ritish Standard fuses 5 Class gg IEC 60269 industrial ferrule fuses 0 to 22mm diameter IEC Class gg fuses with optional indicators (0x38mm only) and strikers. See catalog numbers for availability and ratings. 0x38mm, Class gg, 500 and 400 Vac, 0.5 to 50 A Standard W/ indicator Vac Amps IR (ka) Holder/block C0G0.5 0.5 C0G C0G2 2 C0G4 4 C0G6 6 C0G8 500 8 C0G0 0 C0G2 2 CHM IN-Rail*, 20 C0G6 6 MM block C0G20 20 C0G25 25 C0G32 400 32 C0G32 400 32 C0G32 500 32 C0G40I 500 40 C0G50I 400 50 * Not recommended for use with indicator version..22x58mm, Class gg, 400, 500 and 690 Vac, 2 to 25 A Standard W/ striker Vac Amps IR (ka) Holder/block C22G2 C22G4 C22G4S 4 C22G6 C22G6S 6 C22G8 C22G8S 8 C22G0 C22G0S 0 C22G2 C22G2S 2 C22G6 C22G6S 690 6 C22G20 C22G20S 20 C22G25 C22G25S 25 C22G32 C22G32S 32 C22G40 C22G40S 40 C22G50 C22G50S 50 C22G63 C22G63S 63 C22G C22GS 500 C22G00 C22G00S 00 C22G25 C22G25S 400 25 ØA C 2 20 * Use striker version to actuate optional, external microswitch. imensions mm Catalog symbol Ø A C CH22 IN-Rail*, JM7000 block ØE Indicator/striker C0G 0 38 0 C4G 4.3 5 3 8 4 C22G 22 58 6 8 4 Ø E IEC and ritish Standard fuses 4x5mm, Class gg, 400, 500 and 690 Vac, to 50 A Standard W/ striker Vac Amps IR ( ka) Holder C4G 690 C4G2 2 C4G2S 500 20 C4G4 690 4 C4G4S 500 20 C4G6 690 6 C4G6S 500 20 C4G8 690 8 C4G8S 500 20 C4G0 690 0 C4G0S 500 20 C4G2 690 2 C4G2S 500 20 CH4 IN-Rail** C4G6 690 6 C4G6S 500 20 C4G20 690 20 C4G20S 500 20 C4G25 690 25 C4G25S C4G32 C4G32S 500 32 C4G40 C4G40S 40 20 C4G50 C4G50S 400 50 ** Not recommended for use with indicator version, use striker version to actuate optional, external microswitch ata sheet no. 7205 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-3
5 IEC and ritish Standard fuses Class am IEC 60269 industrial ferrule fuses 0 to 22mm diameter IEC Class am fuses with optional indicators (22x58mm only) and strikers. See catalog numbers for availability and ratings. 0x38mm, Class am, 500 and 400 Vac, 0.25 to 25 A Standard Vac Amps IR (ka) Holder/block C0M0.5 0.5 C0M C0M2 2 C0M4 4 C0M6 500 6 CHM in-rail, C0M8 8 20 MM block C0M0 0 C0M2 2 C0M6 6 C0M20 20 400 C0M25 25 4x5mm, Class am, 400, 500 and 690 Vac, 0.25 to 50 A Standard W/ striker Vac Amps IR (ka) Holder C4M0.25 0.25 C4M0.5 0.5 690 C4M C4M2 2 C4M2S 500 20 C4M4 690 4 C4M4S 500 20 C4M6 690 6 C4M6S 500 20 C4M8 690 8 C4M8S 500 20 C4M0 690 0 C4M0S 500 20 CH4 IN-Rail** C4M2 690 2 C4M2S 500 20 C4M6 690 6 C4M6S 500 20 C4M20 690 20 C4M20S 500 20 C4M25 690 25 C4M25S C4M32 C4M32S 500 32 C4M40 C4M40S 40 20 C4M50 C4M50S 400 50 ** Use striker version to actuate optional, external microswitch. 22x58mm, Class am, 400, 500 and 690 Vac, 2 to 25 A W/ Standard indicator W/ striker Vac Amps IR (ka) Holder/block C22M2 2 C22M4 4 C22M6 6 C22M8 8 C22M0 0 C22M2 C22M2S 2 C22M6 C22M6S 690 6 C22M20 C22M20S 20 CH22 IN-Rail*, C22M25 C22M25S 25 JM7000 block C22M32 C22M32S 32 C22M40 C22M40S 40 C22M50 C22M50S 50 C22M63 C22M63S 63 C22M C22MS 500 C22M00 C22M00S 00 20 C22M25 C22M25I C22M25S 400 25 * Not recommended for use with indicator version, use striker version to actuate optional, external microswitch. imensions mm ØA Catalog symbol Ø A C C ØE Indicator/striker C0M 0 38 0 C4M 4.3 5 3 8 4 C22M 22 58 6 8 4 Ø E ata sheet no. 7205 5-4 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries
IEC and ritish Standard fuses 5 HRC fuse holders CAMaster The ussmann series CAMaster HRC fuse holder features a unique cam-action for easy fuse removal while allowing significantly improved contact pressure between fuse carrier and base contact that enhances electrical performance. A range of lockable safety carriers for the fuse holder (catalog reference LSC), are available. 690 V Amps up to 00 A CSA C22.2 No. 39; IEC 269 and S88, CE SAFEloc The ussmann series SAFEloc HRC fuse holders (for use with HRCI-C fuses) provides a positive, stress-free fuse fitting and locks it in position to ensure safe insertion and withdrawal from the base. ase contacts are fully shrouded to help protect against electric shock. Shrouds utilize simple slide/snap action allowing access to the contact terminal screws. It can be mounted on a 35mm IN-Rail or panel-mounted with a single screw. 600 V Amps 30-60 A Amps etails for Fuses accepted CM20CF 30 _CIF2 HRCI-CA applications CM30CF 30 _H07C CM60CF 60 _K07C HRCII applications CM00CF 00 _K07CR Accessories Amps escription CAMaster accepted 20S 30 CM20CF 32S 30 ack stud CM30CF 60/00S 60/00 CM60/00CF GLP All Ganging link kit 3-Pole 20LSC 30 CM20CF 32LSCC 30 Security carrier with clip CM30CF 63/00LSC 60/00 CM60/00CF esigned to accommodate the compact range of offset blade fuse to CSA C22.2 No. 06, HRCI-C, CE * Amps Connection Fuses accepted C30F C30S C30FS C60F C60S C60FS * For use with HRCI-C fuses. 30 60 Front ack Front-back Front ack Front-back ussmann series Red Spot fuse holders _CIF06 EK-(amp) IEC and ritish Standard fuses These versatile CSA Certified and IP20 finger-safe fuse holders for S88 HRC industrial fuses are available in ratings from 20 to 400 amps. Padlock inserts, warning carriers and fuse adapter accessories enhance safety and application flexibility. See data sheet no. 0083 for details. USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-5
USSMANN SERIES Enhanced safety. Improved system reliability. Simplified inventory. It s easier than ever to improve your circuit protection while efficiently reducing your fuse inventory. Leveraging ussmann series ultimate protection fuses, our Low-Peak Upgrade program couples the industry s most advanced circuit protection with our extensive knowledge to deliver enganced safety, improved system reliability and simplified inventory. In just three simple steps, you ll save time and increase productivity. All by using ussmann series Low-Peak fuses. Three steps to ultimate protection: Audit 2 Analyze 3 Implement Visit Eaton.com/bussmannseries to learn more. Follow us on social media to get the latest product and support information.