Ferrule fuses. High Speed Fuses

Transcription

1 Ferrule fuses Table of Contents Basic Catalog Amp Number Volts Range Page FWA FWX FWH FWC FWP 90V/ FWK FWJ FWL/FWS 150/1500/ Accessories Fuse Holders 11 Ferrule Fuse Ranges Volts Amps AC DC X X X X X X 00-3 X X 700 ( x 58mm) X 700 (1 x 51mm) 1-50 X X X X X X (800Vdc) X X (1000Vdc) X X (1000Vdc) X X (1000Vdc) General Information Cooper Bussmann offers a full line of ferrule style (cylindrical clip-mounted) fuses, designed and tested to meet standards and requirements in various locations around the world. Their unique design and construction provide: Superior cycling capability Low energy let-through (I t) Ferrule fuses provide an excellent solution for small UPS, small ac drives and other low power applications where space is at a premium. Voltage Rating All Cooper Bussmann ferrule fuses except 90V have been tested at their rated voltage. The 90V ferrule fuse has been tested to the IEC 09 standard, which requires clearing at the rated voltage +5%. Accessories Ferrule fuses may be mounted in fuseclips, fuse holders, fuse blocks or fused switches. A variety of products are available. Please consult Cooper Bussmann Application Engineering to discuss your requirement. High Speed Fuses 191

2 Ferrule FWA 150V: 5-0A FWA 5-30A (10 x 38mm) 35-0A (1 X 51mm) Description: Ferrule style high speed fuses. Dimensions: See Dimensions illustration. Ratings: Volts: 150Vac/150Vdc Amps: 5-0A IR: 100kA Sym. Agency Information: CE, UL Recognition Total Clearing I t The total clearing I t at 1.5 K rated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the 0.5 1) clearing I t is found by multiplying by correction factor, K, given as a function of 0. ) applied working voltage, E g, (rms) Dimensions - in (mm) Amp Dimensions Range A B C (38.1) 75 (9.5) 0.0 (1) (50.8) 0.5 (15.9) (0.) A B ) 5-30A Range ) 35-0A Range 150 C Eg Arc Voltage This curve gives the peak arc voltage, U L, which may 300 appear across the fuse during its operation as a function of the applied 00 working voltage, E g, (rms) at a power factor of 15%. 100 Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I b, in % of the rated current. Catalog Numbers ElectricalCharacteristics I t (A Sec) Rated Catalog Current Clearing Watts Numbers Size RMS-Amps Pre-arc at 150V Loss FWA-5A10F 10 x 38mm FWA-10A10F ( 13 3 x 1 1 ). 1.7 FWA-15A10F FWA-0A10F FWA-5A10F FWA-30A10F FWA-35A1F 1 x 51mm FWA-0A1F ( 13 1 x ) FWA-5A1F FWA-50A1F FWA-0A1F Watts loss provided at rated current. See accessories on page 11. Features and Benefits Excellent cycling capability and dc performance Low arc voltage and low energy let-through (I t) Low watts loss in a compact size Used with finger-safe holders/blocks Typical Applications DC common bus DC drives Power converters/rectifiers Reduced voltage starters U L Kp 50 E g I 0.1 b % 19

3 Ferrule FWA 150V: 5-0A FWA 5-30A: 150V (10 x 38mm) Peak Let-Through Curve Peak Let-Through Current FWA 35-0A: 150V (1 x 51mm) Virtual Pre-Arcing Time In Seconds FWA-35A1F FWA-0A1F FWA-5A1F FWA-50A1F FWA-0A1F 8 8 Prospective Current In Amperes RMS Peak Let-Through Curve FWA-0A1F FWA-50A1F FWA-5A1F FWA-0A1F FWA-35A1F High Speed Fuses 10 5 Prospective Short-Circuit Current Symmetrical RMS Data Sheet: Data Sheet:

4 Ferrule FWX 50V (UL): 1-50A FWX (1 x 51mm) Description: Ferrule style high speed fuses. Dimensions: See Dimensions illustration. Ratings: Volts: 50Vac Amps: 1-50A IR: 00kA RMS Sym. 50Vdc Agency Information: CE, UL Recognition 1-50A & CSA Component Acceptance: 5-30A Electrical Characteristics Total Clearing I t The total clearing I t at rated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing I t is found by multiplying by correction factor, K, given as a function of applied working voltage, E g, (rms). Dimensions - mm (inches) 50.8 (.000") K 1) Eg (0.10") ) 1.3 (0.53") Arc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage, E g, (rms) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I b, in % of the rated current. Catalog Numbers Rated It (A Sec) Catalog Current Clearing Watts Number Size RMS-Amps Pre-arc at 50V Loss FWX-1A1F 1 x 51mm 1 FWX-A1F ( 9 1 x ) FWX-3A1F 3 FWX-A1F FWX-5A1F FWX-10A1F. 3. FWX-15A1F FWX-0A1F FWX-5A1F FWX-30A1F FWX-50A1F Watts loss provided at rated current. (50Vdc/Interrupting rating 50kA) UL Recognition & CSA Component Acceptance on 5 through 30A only. Consult Cooper Bussmann for additional ratings. See accessories on page 11. Features and Benefits Excellent cycling capability and dc performance Low arc voltage and low energy let-through (I t) Low watts loss in a compact size Used with finger-safe holders/blocks Typical Applications DC common bus DC drives Power converters/rectifiers Reduced voltage starters U L ) 300 ) E g Kp I 0.1 b % 19

5 Ferrule FWX 50V (UL): 1-50A FWX 1-30A: 50V (1 x 51mm) Peak Let-Through Curve Did You Know? All-Inclusive Elevator Disconnect Simplifies Installation Plus a Multitude of Codes and Standards When the Westin Hotel chain renovated the historic Cupples Station in downtown St. Louis, the hotel s design-and-build electrical contractor specified the Cooper Bussmann Power Module elevator shunt trip disconnect. The primary reason was the savings in man-hours with everything in one box: the fire alarm, control wiring and power wiring; all the parts needed to interface with a fire alarm system in a UL 98 Listed assembly. In addition, all the codes and standards surrounding the elevator disconnecting means electrical, elevator, fire alarm and the sprinkler system are met, including ANSI/ASME A17.1, NFPA 7, NEC 0.. The contractor faced a unique situation when the luxury hotel chain chose to revamp the old warehouse versus tearing the structure down and rebuilding. The hotel complex consists of four buildings interconnected with walkways. A total of eight elevators were installed with eight Power Module switches, two per building. Each 30 HP passenger elevator is fused with Cooper Bussmann Low-Peak Class J LPJ-70SP fuses while each 0HP service elevator uses the Class J LPJ-90SP fuses. High Speed Fuses Data Sheet:

6 Ferrule FWH 500V: A FWH ( x 3mm) Description: Ferrule style high speed fuses. Dimensions: See Dimensions illustrations. Ratings: Volts: 500Vac Amps: A IR: 50kA at 0% pf (0.5-0A) 0kA at 0% pf (5-30A) Agency Information: CE, UL Recognition A, CSA Component Acceptance: 0.5-7A Opening Times Amp Ratings 150% 00% 300% > 30 min < 30 min 10 sec < 30 min < 30 min 10 sec Dimensions - mm (inches) 31.8 (1.5") 3. (0.15"). (0.5") Catalog Numbers Rated I t (A Sec) Catalog Current Clearing Watts Numbers Size RMS-Amps Pre-arc at 500V Loss FWH-.50AF x 3mm 0.5* FWH-.500AF ( 1 x 1 1 ) 0.5* FWH-001AF 1* FWH-00AF * FWH-3.15AF 3.15* FWH-005AF 5* FWH-.30AF.3* FWH-007AF 7* FWH-010AF 10** FWH-1.5AF 1.5** FWH-015AF 15** FWH-01AF 1** FWH-00AF 0** FWH-05AF 5** 1 35 FWH-030AF 30** *300% minimum opening current at rated voltage. **00% minimum opening current at rated voltage. Consult Cooper Bussmann for dc ratings. See accessories on page 11. Features and Benefits Excellent cycling capability and dc performance Low arc voltage and low energy let-through (I t) Low watts loss in a compact size Used with finger-safe holders/blocks Typical Applications DC common bus DC drives Power converters/rectifiers Reduced voltage starters 19

7 Ferrule FWH 500V: A FWH 0.5-7A: 500V ( x 3mm) Virtual Pre-Arcing Time In Seconds FWH-.50AF FWH-.500AF FWH-001AF x Prospective Current In Amperes RMS FWH-00AF FWH-3.15AF FWH-005AF FWH-.30AF FWH-007AF FWH 10-30A: 500V ( x 3mm) Virtual Pre-Arcing Time In Seconds FWH-1.5AF FWH-01AF FWH-00AF FWH-05AF High Speed Fuses Data Sheet: Data Sheet:

8 Ferrule FWH 500V: 1-30A FWH (1 x 51mm) Description: Ferrule style high speed fuses. Dimensions: See Dimensions illustration. Ratings: Volts: 500Vac Amps: 1-30A IR: 00kA RMS Sym. Agency Information: CE, UL Recognition 1-30A & CSA Component Acceptance: 5-30A. Total Clearing I t The total clearing I t at rated 1.5 voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing 0.5 I t is found by multiplying by correction factor, K, given as a function of applied working 0. voltage, E g, (rms). Dimensions - mm (inches) 50.8 (.000") 15.5 (0.10") K (0.53") 500 Eg Arc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage, E g, (rms) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I b, in % of the rated current. Catalog Numbers Rated I t (A Sec) Catalog Current Clearing Watts Numbers Size RMS-Amps Pre-arc at 500V Loss FWH-1A1F 1 x 51mm 1 FWH-A1F ( 9 1 x ) FWH-3A1F 3.3 FWH-A1F FWH-5A1F FWH-A1F FWH-10A1F. 13 FWH-1A1F 1 FWH-15A1F FWH-0A1F 0 9 FWH-5A1F FWH-30A1F Watts loss provided at rated current. See accessories on page 11. Features and Benefits Excellent cycling capability and dc performance Low arc voltage and low energy let-through (I t) Low watts loss in a compact size Used with finger-safe holders/blocks Typical Applications DC common bus DC drives Power converters/rectifiers Reduced voltage starters.0 1. U L E g Kp I 0.1 b % 198

9 Ferrule FWH 500V: 1-30A FWH 1-30A: 500V (1 x 51mm) Virtual Pre-Arcing Time In Seconds Peak Let-Through Current Prospective Current In Amperes RMS Peak Let-Through Curve FWH-30A1F FWH-5A1F FWH-5A1F FWH-10A1F FWH-15A1F FWH-0A1F FWH-5A1F FWH-30A1F FWH-0A1F FWH-15A1F FWH-10A1F FWH-5A1F High Speed Fuses 10 5 Prospective Short-Circuit Current Symmetrical RMS Data Sheet:

10 Ferrule FWC 00V: -3A FWC (10 x 38mm) Description: Ferrule style high speed fuses. Dimensions: See Dimensions illustration. Ratings: Volts: 00Vac Amps: -3A IR: 00kA RMS Sym. 700Vdc (-5A) Agency Information: CE, UL Recognition: -3A. UL Recognition: -5A Total Clearing I t 1.5 K The total clearing I t at rated voltage and at power factor of 15% are given in the electrical characteristics. For 0.5 other voltages, the clearing I t is found by multiplying by correction factor, K, given as 0. a function of applied working voltage, E g, (rms) Dimensions - mm (inches) 38.1 (1.500") 9.5 (75") (0.0") Eg Arc Voltage.0 This curve gives the peak 1. U L arc voltage, U L, which 1. may appear across the fuse during its operation 800 as a function of the applied working voltage, E g, (rms) at a power factor of 15% E g Power Losses Watts loss at rated current is given in the electri- Kp cal characteristics. The 0.5 curve allows the calculation of the power losses at load currents lower than the rated current The correction factor, K p, is given as a function of I the RMS load current, I b, 0.1 b % in % of the rated current. Catalog Numbers Rated I t (A Sec) Catalog Current Clearing Watts Numbers Size RMS-Amps Pre-arc at 00V Loss FWC-A10F 10 x 38mm FWC-8A10F ( 13 3 x 1 1 ) FWC-10A10F FWC-1A10F FWC-1A10F FWC-0A10F FWC-5A10F FWC-3A10F Watts loss provided at rated current. See accessories on page 11. Features and Benefits Excellent cycling capability and dc performance Low arc voltage and low energy let-through (I t) Low watts loss in a compact size Used with finger-safe holders/blocks Typical Applications DC common bus DC drives Power converters/rectifiers Reduced voltage starters 00

11 Ferrule FWC 00V: -3A FWC -3A: 00V (10 x 38mm) Virtual Pre-Arcing Time In Seconds Peak Let-Through Current FWC-A10F FWC-8A10F FWC-10A10F FWC-1A10F FWC-1A10F FWC-0A10F FWC-5A10F FWC-30A10F & FWC-3A10F Peak Let-Through Curve Prospective Current In Amperes RMS FWC-30A10F & FWC-3A10F FWC-5A10F FWC-0A10F FWC-1A10F FWC-1A10F FWC-10A10F FWC-8A10F FWC-A10F High Speed Fuses 10 5 Prospective Short-Circuit Current Symmetrical RMS Data Sheet:

12 Ferrule FWP 90V/700V (IEC/UL): 1-50A, striker optional FWP (1 x 51mm) Description: Ferrule style high speed fuses with and without indicating striker. Dimensions: See Dimensions illustrations. Ratings: Volts: 90Vac (IEC) 700Vac (UL) Amps: 1-50A IR: 00kA RMS Sym. Agency Information: CE, UL Recognition, CSA Component Acceptance for versions without indicator only. Total Clearing I t The total clearing I t at rated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing I t is found by multiplying by correction factor, K, given as a function of applied working voltage, E g, (rms). Dimensions - mm (inches) Without Striker With Striker ) 0. ) 1.3 (0.53") 5 (0.197") Data Sheets: E57817 rev. B (without striker) 170K53/3 (with striker) K E g (.000") 1) 5-30A Range ) 3-50A Range 15.5 (0.10") 59 (.33") 51 (.00") FWP with striker option. 13 (0.511") 1.3 (0.53") Arc Voltage 1. This curve gives the peak 1. arc voltage, U L, which may 10 appear across the fuse 3 9 during its operation as a 8 function of the applied 7 working voltage, E g, (rms) at a power factor of 15%. 5 Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I b, in % of the rated current. Catalog Numbers I 0.1 b % Rated I t (A Sec) Catalog Current Minimum Clearing At Watts Numbers Size RMS-Amps Melting Rated Voltage Loss Without Striker FWP-1A1Fa 1 FWP-A1Fa FWP-.5A1Fa.5 FWP-3A1Fa 3 FWP-A1Fa FWP-5A1Fa 1 x 51mm FWP-10A1Fa ( 9 1" x ") FWP-15A1Fa FWP-0A1Fa FWP-5A1Fa FWP-30A1Fa FWP-3A1Fa FWP-0A1Fa FWP-50A1Fa With Striker FWP-10A1FI FWP-15A1FI FWP-0A1FI 1 x 51mm FWP-5A1FI ( 9 1 x ) FWP-30A1FI FWP-3A1FI FWP-0A1FI FWP-50A1FI Features and Benefits Excellent cycling capability and dc performance Low arc voltage and low energy let-through ( I t) Low watts loss in a compact size Used with finger-safe holders/blocks Typical Applications DC common bus DC drives Power converters/rectifiers Reduced voltage starters U L E g Kp 0

13 Ferrule FWP 90V/700V (IEC/UL): 1-50A, striker optional Without Striker FWP 5-50A: 0V/700V (1x 51mm) Virtual Pre-Arcing Time In Seconds Peak Let-Through Current FWP-5A1F FWP-10A1F FWP-15A1F FWP-0A1F FWP-5A1F FWP-30A1F FWP-3A1F FWP-0A1F FWP-50A1F Peak Let-Through Curve Prospective Current In Amperes RMS FWP-50A1F FWP-0A1F FWP-3A1F FWP-30A1F FWP-5A1F 10 5 Prospective Short-Circuit Current Symmetrical RMS FWP-0A1F FWP-15A1F FWP-10A1F FWP-5A1F With Striker FWP 5-50A: 0V/700V (1x 51mm) Peak Let-Through Current Peak Let-Through Curve 3A 30A 0A 50A 5A 0A 15A 10A High Speed Fuses Prospective Short-Circuit Current Symmetrical RMS Data Sheet:

14 Ferrule FWP 90V/700V (IEC/UL): 0-100A, striker optional FWP ( x 58mm) Description: Ferrule style high speed fuses. with and without indicating striker. Dimensions: See Dimensions illustration. Ratings: Volts: 90Vac (IEC) 700Vac (UL) Amps: 0-100A IR: 00kA RMS Sym. 500Vdc Agency Information: CE, UL Recognition Total Clearing I t The total clearing I t at rated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing I t is found by multiplying by correction factor, K, given as a function of applied working voltage, E g, (rms) Dimensions - mm (inches) Without Striker With Striker K E g (.83") 15.0 (0.591") 5 (0.197") (.598") FWP with striker option.. (0.875") 58 (.83") 1 (0.30" Arc Voltage This curve gives the peak 10 arc voltage, U L, which may 3 9 appear across the fuse 8 during its operation as a 7 function of the applied working voltage, E g, (rms) 5 at a power factor of 15%. Power Losses 3 Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I b, in % of the rated current. Catalog Numbers Rated I t (A Sec) Catalog Current Minimum Clearing At Watts Numbers Size RMS-Amps Melting Rated Voltage Loss Without Striker FWP-0AFa x 58mm FWP-5AFa ( 7 8" x 9 3") FWP-3AFa FWP-0AFa FWP-50AFa FWP-3AFa FWP-80AFa FWP-100AFa 100* With Striker FWP-0AFI FWP-5AFI FWP-3AFI x 58mm FWP-0AFI ( 7 8" x 9 3") FWP-50AFI FWP-3AFI FWP-80AFI FWP-100AFI 100* *IEC/UL Voltage rating 00/700 Features and Benefits Excellent cycling capability and dc performance Low arc voltage and low energy let-through (I t) Low watts loss in a compact size Used with finger-safe holders/blocks Typical Applications DC common bus DC drives Power converters/rectifiers Reduced voltage starters U L E g Kp I 0.1 b %. (0.87") Data Sheets: E rev. B (without striker) 170K53/5 (with striker) 0

15 Ferrule FWP 90V/700V (IEC/UL): 0-100A, striker optional Without Striker FWP 0-100A:0V/700V ( x 58mm) Peak Let-Through Current Virtual Pre-Arcing Time In Seconds FWP-0AF FWP-5AF FWP-3AF FWP-0AF 8 8 Peak Let-Through Curve Prospective Current In Amperes RMS FWP-100AF FWP-80AF FWP-3AF FWP-50AF Prospective Short-Circuit Current Symmetrical RMS FWP-50AF FWP-3AF FWP-80AF FWP-100AF FWP-0AF FWP-3AF FWP-5AF FWP-0AF 10 5 Peak Let-Through Current Without Striker FWP 0-100A:0V/700V ( x 58mm) Peak Let-Through Curve 3A 80A 100A 3A 50A 0A 0A 5A High Speed Fuses Prospective Short-Circuit Current Symmetrical RMS Data Sheet:

16 Ferrule FWK 750V: 5-0A FWK 5-30A (0 x 17mm 35-0A (5 x 1mm) Description: Ferrule style high speed fuses. Dimensions: See Dimensions illustrations. Ratings: Volts: 750Vac 750Vdc (Time constant = ms) Amps: 5-0A IR: 5kA RMS Sym. Agency Information: CE Catalog Numbers Rated I t (A Sec) Catalog Current Clearing Watts Numbers Size RMS-Amps Pre-arc at 750Vdc Loss FWK-5A0F 0 x 17mm FWK-8A0F ( 13 1 x 5 ) FWK-10A0F FWK-15A0F FWK-0A0F FWK-5A0F FWK-30A0F FWK-35A5F 5 x 1mm FWK-0A5F (1 x 5 3 ) FWK-50A5F FWK-0A5F See accessories on page 11. Dimensions - mm (inches) Fig. 1: 5-30A Fig. : 35-0A 17.0 (5.000") 1.05 (5.75") 1.0 (0.30") 0.5 (0.807") 5. (1") Features and Benefits Excellent cycling capability and dc performance Low arc voltage and low energy let-through (I t) Low watts loss in a compact size Used with finger-safe holders/blocks Typical Applications DC common bus DC drives Power converters/rectifiers Reduced voltage starters 0. (0.813") 0

17 Ferrule FWK 750V: 5-0A FWK 750V: 5-30A (0 x 17mm) 35-0A (5 x 1mm) Virtual Pre-Arcing Time In Seconds ±1 10 ± x10 ±3 FWK-5A0F FWK-8A0F FWK-10A0F 8 FWK-15A0F FWK-0A0F FWK-5A0F FWK-30A0F FWK-0A5F FWK-50A5F FWK-0A5F 8 8 Prospective Current In Amperes RMS Did You Know? Lower Transaction Costs Mean Greater Operational Efficiency We believe the synchronization of business is essential in maximizing the benefit of electronic commerce to the electrical distribution market. We re working hard to make doing business with Cooper Bussmann easier. Some other electronic commerce services we offer include: Industry Data Exchange Association (IDEA): We are a charter member of IDEA, a foundation for establishing standards for electronic communications founded by members of NAED and NEMA. Industry Data Warehouse (IDW) Electrical Industry Extranet (IDXchange) Socket to Socket Bar Coding: Bussmann product is coded with the UCC-18 serialized shipping container bar code to facilitate a distributor dock-to-stock and pay from receipt process. We also offer customer-specific bar coded shipments for distributors to use in cross-docking and automated receiving and stocking. High Speed Fuses Data Sheet:

18 Ferrule FWJ 1000V: 0-30A FWJ (1 x 7mm) Description: Ferrule style high speed fuses. Dimensions: See Dimensions illustration. Ratings: Volts: 1000Vac Amps: 0-30A IR: 5kA RMS Sym. 800Vdc Agency Information: CE, UL Recognized Total Clearing I t 1.5 K The total clearing I t at rated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the 0.5 clearing I t is found by multiplying by correction fac- 0. tor, K, given as a function 0.15 of applied working voltage, 00 E g, (rms). Dimensions - mm (inches).7 (.") 15.9 (0.5") Eg 1.5 (0.571") Arc Voltage 000 This curve gives the peak 100 arc voltage, U L, which may appear across the fuse 100 during its operation as a function of the applied 800 working voltage, E g, (rms) at a power factor of 15%. 00 Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, Kp, is given as a function of the RMS load current, I b, in % of the rated current. Features and Benefits Excellent cycling capability and dc performance Low arc voltage and low energy let-through (I t) Low watts loss in a compact size Used with finger-safe holders/blocks Typical Applications DC common bus DC drives Power converters/rectifiers Reduced voltage starters Kp U L E g I b Catalog Numbers % Rated I t (A Sec) Catalog Current Clearing Watts Numbers Size RMS-Amps Pre-arc at 1000V Loss FWJ-0A1F 1 x 7mm FWJ-5A1F ( 9 1 x 5 8 ) FWJ-30A1F Watts loss provided at rated current. See accessories on page 11. Data Sheet:

19 Ferrule FWJ 1000V: 0-30A FWJ 0-30A: 1000V (1 x 7mm) Virtual Pre-Arcing Time In Seconds Peak Let-Through Current FWJ-0A1F FWJ-5A1F FWJ-30A1F 8 8 Peak Let-Through Curve Prospective Current In Amperes RMS FWJ-30A1F FWJ-5A1F FWJ-0A1F High Speed Fuses 10 5 Data Sheet:

20 Ferrule FWS/FWL 1000Vdc: -30A FWS -15A (0 x 17mm) FWL 0-30A (0 x 17mm) Description: Ferrule style full range fuses. Dimensions: See Dimensions illustrations. Ratings: Volts: 100Vac (FWL 0-30A) 100Vac (FWS 8-15A) 100Vac (FWS -A) 1000Vdc (FWL/FWS -30) Amps: -30A IR: 5kA RMS Sym. 1000Vdc Agency Information: CE, IEC 0077 Catalog Numbers Rated I t (A Sec) Catalog Current Clearing Watts Numbers Size RMS-Amps Pre-arc at 1000Vdc Loss FWS-A0F 0 x 17mm FWS-A0F ( 13 1 x 5 ) FWS-8A0F FWS-10A0F FWS-1A0F FWS-15A0F FWL-0A0F 0 x 17mm FWL-5A0F ( 13 1 x 5 ) FWL-30A0F ADD I to catalog number for indicating version. Enclosed finger-safe fuse holder CH17 Open style fuse block 530-OP See accessories on page 11. Dimensions - mm (inches) 17.0 (5.000") 1.0 (0.30") 0.5 (0.807") Indicating Version Dimensions - mm (inches) 8.0 (15") 17.0 (5.000") (0.807") Features and Benefits Excellent cycling capability and dc performance Low arc voltage and low energy let-through (I t) Low watts loss in a compact size Used with finger-safe holders/blocks Typical Applications DC common bus DC drives Power converters/rectifiers Reduced voltage starters Traction aux circuits Capacitor protection FWL/FWS -30A: 1000Vdc -30A (0 x 17mm) Data Sheet: (0.30").0 (0.079") 10

21 Ferrule fuse accessories Fuse Holders Catalog Symbol: CH Series Description: DIN rail mount fuse holders for high speed fuses. Agency Information: CE North American 10 x 38 Class CC: Listed UL 51, Guide IZLT, File E1853, Certified CSA Std. C. No. 39, Class 5 01, File 735 North American 10 x 38 Midget: Recognized UL 51, Guide IZLT, File E1853, Certified CSA Std. C. No. 39, Class 5 01, File 735 European: 10 x 38 IEC 9--1, 1 x 51 IEC 9-, x 58 IEC 9- Features and Benefits 10 x 38 Dovetail design provides maximum flexibility in assembling multiple poles Finger-safe design - No exposed contacts DIN rail mount (35mm) - Fits standard mounting rails Optional open fuse indication lights tells fuse status at a glance Handle/fusepuller easily installs and removes fuses Available in single and multi-pole configurations Circuit marking system (P/N CH10CL and CH10CM) Wire ready to save time as terminals are ready to accept wires CE marking Typical Applications Switchboard panel, control consoles, small motors, transformers, and similar applications Recommended Cooper Bussmann Fuse Types 10 x 38 North American Class CC Fuses - LP-CC, FNQ-R, KTK-R 10 x 38 North American Midget Fuses - FNQ, KTK, AGU, BAF, BAN, FNM, FWA, & FWC 1 x 51 Fuses - FWX, FWH, FWP & NON x 58 Fuses - FWP Fuse Blocks Catalog Symbol: J70100 Description: Fuse holder for use with x 58mm fuses (FWP-0AF, FWP-100AF, etc.) Construction: Thermoplastic Ratings: Volts: 700Vac Amps: 3-100A Withstand: 00,000A RMS Sym. Agency Information: CE, UL Recognized, Guide IZLT, File E1853 Flammability Rating: UL 9V0 Catalog Numbers Catalog Max Wire Numbers Amps Poles Size Terminations J7003-CR 3 # Box Lug w/ J7003-3CR 3 3 # Retaining Clip Box Lug w/ J CR # Retaining Clip J70100-CR 100 # J CR # Web Services Did You Know? The Cooper Bussmann web site makes available free information and other resources that include: Product Data Sheets for complete technical information on Bussmann products Online catalogs for the latest United States and European products Safety BASICs for the essentials of electrical safety Training Modules for increasing skill levels of customers and end users Fuse Cross Reference to find the correct Bussmann replacement for a competitive fuse Arc-Flash Calculator to determine the incident energy level and flash protection boundary along with the recommends the level of Personal Protective Equipment (PPE) High Speed Fuses Data Sheet:1151 Data Sheet:

22 1