DESCRIPTION Galleria's beauty and versatility make it an excellent choice for roadway and general area lighting applications. An aesthetic reveal in the formed aluminum housing gives the Galleria a distinctive look while a variety of mounting options and lamp wattages provide maximum flexibility. Galleria's superior light distributions makes it the optimum choice for almost any small, medium or large area lighting application. Catalog # Project Comments Prepared by McGRAW-EDISON Type Date SPECIFICATION FEATURES Construction HOUSING: Formed aluminum housing with stamped reveal has interior-welded seams for structural integrity and is finished in premium TGIC polyester powder coat. U.L. listed and CSA certified for wet locations. DOOR: Formed aluminum door has heavy-duty hinges, captive retaining screws and is finished in premium TGIC polyester powder coat. (Spider mount unit has steel door.) Electrical BALLAST TRAY: Ballast tray is hardmounted to housing interior for cooler operation. Optical REFLECTOR: Choice of high efficiency optical systems utilizing horizontal and vertical lamp orientations. Optional high efficiency segmented optical systems constructed of premium 95% reflective anodized aluminum sheet. Optical segments are rigidly mounted inside a thick gauge aluminum housing for superior protection. All segment faces are clean of rivet heads, tabs or other means of attachment which may cause streaking in the light distribution. Standard with mogulbase socket. All optical modules feature quick disconnect wiring plugs and are field rotatable in 90 increments. LENS: Convex tempered glass lens or flat glass. Mounting Extruded aluminum arm includes internal bolt guides allowing for easy positioning of fixture during assembly. Specify arm-included mounting for contractor-friendly single carton packaging of housing and arm. GSS/GSM/GSL GALLERIA SQUARE 70-000W Pulse Start Metal Halide DIMENSIONS ARM DRILLING High Pressure Sodium Metal Halide Arm Mount Spider Mount TYPE "M" A A -5/6" [59mm] /" [9mm] Dia. Hole -7/6" [6mm] ARCHITECTURAL AREA LUMINAIRE -7/8" [mm] B B () 5/8" [6mm] Dia. Holes F C D E Fixture F GSS 9-/" -/" -7/8" 5-5/8" 6" or 9" -/" 5mm 8mm 7mm 97mm 5mm or 9mm 7mm GSM " -/" 9-/" -/" 6" or " 5" or 6" 79mm 89mm 80mm 55mm 5mm or 56mm 8mm or 06mm GSL -/" -/" 5-7/8" 7" 6" or " 8-/" or 9-/" 68mm 08mm 657mm 686mm 5mm or 56mm 76mm or 50mm NOTE: Top cap used on GSM with 000W flat glass vertically lamped optics only. WATTAGE TABLE Fixture Lamp Type Wattage GSS (Galleria Small) Pulse Start Metal Halide (MP) 70, 00, 50W High Pressure Sodium (HPS) 70, 00, 50W Metal Halide (MH) 75W GSM (Galleria Medium) Pulse Start Metal Halide (MP) 70, 00, 50, 75, 00, 50, 0, 50, 00, 50, 750, 875, 000W High Pressure Sodium (HPS) 70, 00, 50, 50, 00, 750, 000W Metal Halide (MH) 75, 50, 00, 000W GSL (Galleria Large) Pulse Start Metal Halide (MP) 50, 0, 50, 00, 50, 750, 000W High Pressure Sodium (HPS) 50, 00, 750, 000W Metal Halide (MH) 50, 00, 000W C D ENERGY DATA CWA Ballast Input Watts 50W MP HPF (85 Watts) 75W MP HPF (98 Watts) G 50W MP HPF (8 Watts) G 50W HPS HPF (95 Watts) 00W MP HPF (5 Watts) G 00W HPS HPF (57 Watts) 750W MP HPF (80 Watts) 000W MH HPF (080 Watts) 000W HPS HPF (00 Watts) EPA Effective Projected Area: (Sq. Ft.) [Without Arm] GSS:.0 GSM:.0 GSL:.90 [Spider Mount] GSS:.5 GSM:.86 GSL:.5 SHIPPING DATA Approximate Net Weight: 6 lbs. (6 kgs.) 79 lbs. (6 kgs.) 88 lbs. (0 kgs.) SYSTEMS C E R T I F I E D ADH08575 pc 00-0- :0:

GSS / GSM / GSL GALLERIA SQUARE MOUNTING CONFIGURATIONS Wall Mount Arm Mount Single Arm Mount @ 80 Arm Mount @ 90 Arm Mount @ 0 (Round Pole Only) Arm Mount @ 90 Arm Mount @ 90 E.P.A. TABLE Single [w/arm where applicable] @ 80 @ 90 @ 0 @ 90 @ 90 GSS.7...6.6 5. GSM.9 5.8 6.8 9. 9. 0. GSL. 8.8 9.8.7.7 5.6 PHOTOMETRICS 0 0 Footcandle Table Select mounting height and read across for footcandle values of each isofootcandle line. Distance in units of mounting height. Mounting Footcandle Values for Height Isofootcandle Lines 000W [SL] / 00W [AR] 5'.88. 0.7 0.9 0. 0'.00.00 0.50 0.0 0.0 5'.6 0.7 0.7 0.5 0.07 GSM-XX-000-MH-SL-FG 000-Watt MH 0,000-Lumen Clear Lamp Spill Light Eliminator Flat Glass 0 5 GSM-XX-000-MH-V-FG 000-Watt MH 0,000-Lumen Clear Lamp Type III Vertical Flat Glass 0 5 GSM-XX-000-MH-AS-SG 000-Watt MH 0,000-Lumen Clear Lamp Area Square Flat Glass 000W [V/AS] 0'.50.00.00 0.50 0.0 5'.60 0.7 0.7 0.8 0.07 0'.00.00 0.50 0.0 0.0 NOTE: Specifications and dimensions subject to change without notice. Visit our web site at www.cooperlighting.com Customer First Center Highway 7 South Peachtree City, GA 069 770.86.800 FAX 770.86.80 ADH08575 pc 00-0- :0: 00-0- :0:

GSS / GSM / GSL GALLERIA SQUARE ORDERING INFORMATION Sample Number: GSM-AM-00-MP-MT-V-SG-BK-L Product Family GSS= Galleria Square Small GSM= Galleria Square Medium GSL= Galleria Square Large Mounting Method AM= Arm Mount AIR= Arm Included for Round Pole AIS= Arm Included for Square Pole SM= Spider Mount ( /8'' OD ) SM= Spider Mount ('' OD ) SM= Spider Mount ( /'' OD ) Lamp 5 Wattage MP 70= 70W 00= 00W 50= 50W 75= 75W 00= 00W 50= 50W 0= 0W 50= 50W 00= 00W 6 50= 50W 750= 750W 875= 875W 000= 000W 7 HPS 70= 70W 00= 00W 50= 50W 50= 50W 00= 00W 750= 750W 000= 000W 7 MH 8 75= 75W 50= 50W 00= 00W 000= 000W 7 Lamp Type MP= Pulse Start Metal Halide HPS= High Pressure Sodium MH= Metal Halide 8 Voltage 9 0= 0V 08= 08V 0= 0V 77= 77V 7= 7V 80= 80V MT= Multi-Tap 0 TT= Triple-Tap 0 5T= 5-Tap Distribution Horizontal Lamp F= Type I Formed F= Type II Formed S= Type II Segmented F= Type III Formed S= Type III Segmented S= Type IV Segmented 5S= Type V Segmented FT= Forward Throw SL= Spill Light Eliminator CA= Cutoff Asymetric 5 with EHS Vertical Lamp AR= Area Round AS= Area Square V= Type III Vertical RW= Rectangular Wide 6 Lens Type FG= Flat Glass 7 SG= Sag Glass Notes: Arm not included. See Accessories. Arm length varies based on housing size: 9" for GSS, -/" for GSM and " for GSL. Available on GSS housing only. Available on GSL housing only. 5 Standard with medium-base sockets in GSS housing. Mogul-base sockets in GSM and GSL housings. Wattage availability varies by housing size - see Wattage Table. 6 Requires reduced envelope ED-8 lamp when used with GSM housing and flat glass vertically lamped optics. 7 Requires reduced envelope BT-7 lamp when used with GSM housing. 8 75, 50 and 00W MH available for non-us markets only. 9 Products also available in non-us voltages and 50Hz for international markets. Consult factory for availability and ordering information. 0 Multi-Tap ballast is 0/08/0/77V wired 77V. Triple-Tap ballast is 0/77/7V wired 7V. 5-Tap ballast is 0/008/0/77/80V wired 80V. Only available in 00-000W. Medium housing fixture only. Maximum wattage on segmented optical distributions is 00W. 00W Metal Halide lamp must use reduced envelope ED-8 lamp. Not available in GSL housing. Must use reduced envelope lamp, not available in GSL housing. 5 Available on GSM and GSL housings only. 6 RW optic not available with flat glass. 7 000W GSL with flat glass requires BT-7 lamp and is not available in AS, RW, SL or V distributions. 8 Other finish colors available, including a full line of RAL color matches. Consult your Cooper Lighting Representative. 9 Add as suffix in the order shown. 0 Quartz options not available with SL optics. House side shield not available with 5S, RW, AS, AR, SL and CA optics. Arm mount only, 00W Maximum. Order separately, replace XX with color suffix. Compatible with sag lens vertical optics only. Color 8 AP= Grey BZ= Bronze BK= Black WH= White DP= Dark Platinum GM= Graphite Metallic Options 9 F= Single Fuse (0, 77 or 7V) FF= Double Fuse (08, 0 or 80V) L= Lamp Included EM= Quartz Restrike w/ 0 Delay Q= Quartz Restrike 0 R= NEMA Twistlock Photocontrol Receptacle EHS= External Adjustable House Side Shield HS= House Side Shield VS= Vandal Shield Accessories GSM-EXTHS= External House Side Shield -. EPA GSL-EXTHS= External House Side Shield -.6 EPA MA00XX= '' Arm for Square Pole..0 EPA5 MA005XX= 6'' Arm for Square Pole. 0.5 EPA5 MA006XX= Direct Mount Kit for Square Pole5 MA007XX= '' Arm for Round Pole..0 EPA5 MA008XX= 6'' Arm for Round Pole. 0.5 EPA5 MA009XX= Direct Mount Kit for Round Pole5 MA0XX= 6'' Arm for Square Pole. 0.5 EPA MA0XX= 6'' Arm for Round Pole. 0.5 EPA MA0XX= 9'' Arm for Square Pole. 0.5 EPA MA0XX= 9'' Arm for Round Pole. 0.5 EPA MA09XX= Wall Mount Bracket with 0'' Arm MA06XX= Wall Mount Bracket MA08XX= /'' Arm and Round Pole Adapter -. 0.8 EPA OA066XX= Mast Arm Adapter MA00XX= Single Adapter for /'' O.D. MA0XX= @80 Adapter for /'' O.D. MA0XX= @0 Adapter for /'' O.D. MA0XX= @90 Adapter for /'' O.D. MA0XX= @90 Adapter for /'' O.D. MA05XX= @0 Adapter for /'' O.D. MA06XX= @90 Adapter for /'' O.D. MA07XX= Single Adapter for /8'' O.D. MA08XX= @80 Adapter for /8'' O.D. MA09XX= @0 Adapter for /8'' O.D. MA05XX= @90 Adapter for /8'' O.D. MA08XX= @90 Adapter for /8'' O.D. MA09XX= @90 Adapter for /8'' O.D. MA060= House Side Shield for GSS (Field Installed) MA06= House Side Shield for GSM (Field Installed) MA06= House Side Shield for GSL (Field Installed) OA/RA06= NEMA Twistlock Photocontrol - Multi-Tap OA/RA07= NEMA Twistlock Photocontrol - 80V OA/RA0= NEMA Twistlock Photocontrol - 7V NOTE: Specifications and dimensions subject to change without notice. Visit our web site at www.cooperlighting.com Customer First Center Highway 7 South Peachtree City, GA 069 770.86.800 FAX 770.86.80 ADH08575 pc 00-0- :0: 00-0- :0:

DESCRIPTION The IMPACT Elite Quarter Sphere cutoff wall luminaire makes an ideal complement to site design. Rugged construction and full cutoff classified optics provide facade and security lighting for light restricted zones surrounding schools, office complexes, apartments, and recreational facilities. U.L. and cul Listed for wet locations in down mount applications and damp locations in up mounted applications. Catalog # Project Comments McGRAW-EDISON Type Date Prepared by SPECIFICATION FEATURES Construction Two-piece die-cast aluminum housing and removable hinged door frame nests securely for precise tolerance control and repeatability. Hinged door frame inset for clean mating with housing surface and secured via two [] captive stainless steel fasteners. Optional tamper resistant torx head fasteners [TR] offer vandal resistant access to the electrical compartment. /8" clear, heat and impact resistant tempered flat glass lens combined with molded silicone gasket to seal the integrated optical assembly while ensuring peak optical performance. Electrical Integral hard mount electrical components are secured and grounded within the die-cast aluminum housing for optimal heat sinking and extended component life. Minimum starting temperatures are -0 C (-0 F) for HPS and -0 C (- F) for MP. Compact fluorescent luminaires feature electronic universal 0-77V high efficiency 50/60Hz ballast with -8 C (-0 F) minimum starting. Available in 50-75W HID or 6-8W CF. Optical Premium anodized 95% reflective aluminum optical assemblies provide high efficiency Type II distribution. Optional silk screened house side flat glass shield provides decreased wall brightness. All Impact Elite Wall Series luminaires classify as IESNA full cutoff in downlight applications. Mounting Gasketed and zinc plated rigid steel mounting attachment fits directly to " j-box or wall with the Impact Elite Hook-N-Lock system for fast installation and mounting in both traditional downlighting [wet location] or inverted uplighting [damp location] mounting positions. Secured via two [] captive corrosion resistant allen head set screws concealed from view, but accessible from bottom of fixture. Finish Housing and door are protected with 5-stage premium TGIC polyester powder coat paint. Premium TGIC powder coat finishes withstand extreme climate changes while providing optimal color and gloss retention over the fixture s installed life. Standard colors include black, bronze, grey, white, dark platinum and graphite metallic. RAL and custom color matches available. Consult McGraw-Edison Architectural Colors Brochure for complete selection. ISS IMPACT ELITE QUARTER SPHERE 50-75W Pulse Start Metal Halide Metal Halide High Pressure Sodium 6-8W Compact Fluorescent FULL CUTOFF WALL MOUNT LUMINAIRE NOTE: In downlight applications only. DIMENSIONS HOOK-N-LOCK MOUNTING (Mounting attachment included. J-Box not included.) TECHNICAL DATA UL598 Listed, CUL Listed 5 C Maximum Ambient Temperature External Supply Wiring 90 C Minimum Down Mounted Wet Location Up Mounted Damp Location 8" [57mm] 9" [9mm] 9" [9mm] ENERGY DATA High Reactance Ballast Input Watts 50W HPS HPF (66 Watts) 50W MH HPF (7 Watts) 70W HPS HPF (9 Watts) 70W MH HPF (90 Watts) 00W HPS HPF (0 Watts) 00W MH HPF (9 Watts) 50W HPS HPF (90 Watts) 50W MH HPF (85 Watts) CWA Ballast Input Watts 75W MH HPF (0 Watts) Electronic Ballast Input Watts 6W CF HPF (9 Watts) W CF HPF (6 Watts) W CF HPF (6 Watts) 5W CF HPF (55 Watts) SHIPPING DATA Approximate Net Weight: 8 lbs. (8 kgs.) SYSTEMS C E R T I F I E D ADH006 00-0-0 5:55:8

ISS IMPACT ELITE QUARTER SPHERE PHOTOMETRICS (Complete IES files available at www.cooperlighting.com) 0 A BC D E 0 0 Footcandle Table Select mounting height and read across for footcandle values of each isofootcandle line. Distance in units of mounting height. Mounting Footcandle Values for Height Isofootcandle Lines 50-MP / 50-HPS 0' 7.0.88. 0.7 0.9 ' 5.00.00.00 0.50 0.0 '.65.6 0.7 0.7 0.07 -CF 8'.6. 0.6 0.5 0. 0'.00.00 0.50 0.0 0.0 5'.8 0.6 0. 0. 0.06 0 5 0 5 0 5 ISS-50-MP-XX-S 50 Watt MP,000 Lumen Clear Lamp ISS-50-HPS-XX-S 50 Watt HP 6,000 Lumen Clear Lamp ISS--CF-XX-S Watt CF,00 Lumen Lamp ORDERING INFORMATION Sample Number: ISS-50-MP-0-S-BZ Product Family ISS= Impact Elite Small Quarter Sphere Lamp Wattage MP 50= 50W 70= 70W 00= 00W 50= 50W HPS 50= 50W 70= 70W 00= 00W 50= 50W MH 75= 75W CF 6 = () 6W = () W = () W 5 = () 6W 6 = () W 8 = () W Lamp Type MP= Pulse Start Metal Halide HPS= High Pressure Sodium MH= Metal Halide CF= Compact Fluorescent Voltage 0= 0V 08= 08V 0= 0V 77= 77V 7= 7V 80= 80V DT= Dual-Tap MT= Multi-Tap TT= Triple-Tap E= Electronic 0-77V 5 Distribution S= Type II Segmented Color 6 AP= Grey BZ= Bronze BK= Black WH= White DP= Dark Platinum GM= Graphite Metallic Options F= Single Fuse (0, 77 or 7V) 7 FF= Double Fuse (08, 0 or 80V) 7 L= Lamp Included P= Button Type Photocontrol (0V, 08, 0, or 77V) 7 TR= Tamper Resistant Fasteners HS= House Side Shield Glass 5 PL= Polycarbonate Lens 5, 8 Q= Quartz Restrike T Lamp 9 EM= Emergency Quartz Restrike T Lamp w/ Time Delay Relay 9 EM/SC= Emergency Separate Circuit T Lamp9, 0 QMR= Quartz Restrike MR6 Lamp9, EMMR= Emergency Quartz Restrike MR6 Lamp w/ Time Delay Relay, EM/SC/MR= Emergency Separate Circuit MR6 Lamp0,, EM/SC/MR= Emergency Separate Circuit with () MR6 Lamps0,, EM/SC/V= Emergency Separate Circuit V Low Voltage () MR6 0, Lamp EMI0= Emergency Cold Temperature (UL9 Listed) Power Pack -87, 5 degrees C / 0 degrees F, () CF Lamp CFEM= Emergency CF Power Pack (UL9 Listed) () CF Lamps, 0 7, 6 Degrees C/ Degrees F Notes: HID lamps are medium base. 75W MH is available for non-u.s. markets only. Not available in 80V. Products also available in non-us voltages and 50Hz for international markets. Consult your Cooper Representative for availability and ordering information. Dual-Tap ballast is 0/77V wired 77V. Multi-Tap ballast is 0/08/0/77V wired 77V. Triple-Tap ballast is 0/77/7V wired 7V. 5 Available with CF Option only. In cold temperatures, compact fluorescent lamps produce lower illumination levels. 6 Add as suffix. 7 Must specify voltage. 8 Down lighting position only. 9 () 0W Lamp, 00W maximum quartz lamp. Utility power may need to cycle to allow HID lamp to cool in warm climates. Not available with CF Option. Lamp supplied by others. 0 Leads out of the back of the unit for auxillary power. Not available with CF lamps. () or () 0V Lamps. GU0 base, 50W maximum each. Lamps supplied by others. Not available with 5, 6, 8 CF wattages. () or () V bi-pin lamp, socket GU5. base, 5W maximum.power supplied by low voltage DC source (supplied by others). Lamp supplied by others. 5 Specify 0 or 77V, (-8 C) minimum temperature. 6 Specify 0 or 77V, (0 C) minimum temperature. NOTE: Specifications and dimensions subject to change without notice. Visit our web site at www.cooperlighting.com Customer First Center Highway 7 South Peachtree City, GA 069 770.86.800 FAX 770.86.80 ADH006 00-0-0 5:55:8 00-06- :06:7