RDIOFLET passive repeaters page 46
RDIOFLET passive repeaters This range of calzavara products forms part of an interesting technical solution to supply and install microwave radio links, in areas where line of sight between radio link terminals is annulled or drastically reduced by interposing obstacles (mountains, buildings, trees, etc.). The repeaters are passive because, due to their functioning, they don't require a source of electrical energy. The calzavara have been designed with the scope of guaranteeing advantages in terms of installation and maintenance, such as: wide range of models in conformity to each type of request Simplified installation thanks to the use of reflecting panels having a reduced weight and size Wide operative capability (band frequency from 2 to 23 Gz) Independent azimuth and zenith s Greater orientation angles (to avoid alignment errors) The reflecting surface is composed of panels with dimensions raging from 2 to 132 m 2. The reflecting surface is extremely flat, in order to guarantee perfect functioning with band frequencies of up to 23 Gz. Upon request can be supplied surfaces suitable for even greater frequencies. In over 40 years of presence on the market, over 600 radio links all over the world operate with calzavara passive repeaters. The know-how acquired allows calzavara to support its customers in all phases of application of the passive repeaters, starting from the free reliability analysis. Design Materials Supply Structural steel design according to the most recent European Standard. Designs to other International Standards (EI, S, NV65) available upon request. Design wind speed (Eurocode 1 - EN 1991) 27 m/s (q 10 =1.2 kn/m 2 ) Design wind speed (EI 222) 160 km/h (q 10 =1.2 kn/m 2 ) onstant operational wind speed on entire height 110 km/h Twist and sway at operational wind speed <6 The materials comply with the requirements of European Standards (EURONORM). Structural parts S235JR (Fe 360 ) EN 10025 Nuts and bolts class 8.8 EN 20898-1 ll steel materials are protected by hot-dip galvanizing in accordance to Euronorm EN 1461 and STM 123 Standards. The standard supply provides the minimum configuration required for tower commissioning, excluding radiant systems and mounts. Template and anchor bolts (only for Ground Mounted) Passive repeater Packing list with assembly and maintenance instructions Packing For a description of the accessories and ordering information, please refer to the ccessories catalogue. ll legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. ll data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development. calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & 2009 - page 46
ll legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. ll data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development. RDIOFLET calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & 2009 - page 47
RDIOFLET surface + _ ZENIT + _ ZENIT L L R R ZIMUT Zenith zimuth Gross Packing Foundation excavation weight volume volume m 2 mm mm mm mm degree degree kg m 3 m 3 m 3 Foundation concrete volume GROUND MOUNTED - LG SERIES LG 803 80 7316 10994 4400 3000 +5/-15 5 R/5 L 14000 38 38 45 LG 903 90 8231 10994 4400 3000 +5/-15 5 R/5 L 15000 40 40 45 LG 1083 108 8231 13196 4400 3000 +5/-15 5 R/5 L 16500 43 43 45 LG 1203 120 9146 13196 4400 3000 +5/-15 5 R/5 L 17400 45 45 45 LG 1323 132 9146 14500 4400 3000 +5/-15 5 R/5 L 18200 48 43 45 ZIMUT Zenith zimuth Gross Packing Foundation Foundation excavation concrete surface weight volume volume volume m 2 mm mm mm mm degree degree kg m 3 m 3 m 3 GROUND MOUNTED - MD SERIES MD 163 16 7316 4396 3900 3000 +5/-20 5 R/5 L 3200 8 5 6 MD 183 18 3656 5000 3900 3000 +5/-20 5 R/5 L 3300 8 5 6 MD 243 24 3656 6596 3900 3000 +5/-20 5 R/5 L 3500 9 7 9 MD 303 30 3656 6596 5000 3000 +5/-20 5 R/5 L 5350 13 8 10 MD 363 36 4571 6596 5000 3000 +5/-20 5 R/5 L 5700 14 10 11 MD 393 39 5486 7200 5000 3000 +5/-20 5 R/5 L 5900 15 11 12 MD 483 48 5486 8796 5000 3000 +5/-20 5 R/5 L 6150 16 13 16 MD 643 64 5486 8796 6350 3000 +5/-20 5 R/5 L 9300 24 14 17 MD 683 68 7316 9400 6350 3000 +5/-20 5 R/5 L 9500 24 14 17 MD 165 16 7316 4396 5000 5000 +5/-20 5 R/5 L 4300 10 7 9 MD 185 18 3656 5000 5000 5000 +5/-20 5 R/5 L 4350 10 9 11 MD 245 24 3656 6596 5000 5000 +5/-20 5 R/5 L 4500 11 11 13 MD 305 30 4571 6596 5000 5000 +5/-20 5 R/5 L 8250 15 12 14 MD 365 36 5486 6596 5000 5000 +5/-20 5 R/5 L 8550 16 14 16 MD 395 39 5486 7200 5000 5000 +5/-20 5 R/5 L 8750 17 15 17 MD 485 48 5486 8796 6350 5000 +5/-20 5 R/5 L 8900 18 17 19 MD 645 64 7316 8796 6350 5000 +5/-20 5 R/5 L 10100 27 19 21 MD 685 68 7316 9400 6350 5000 +5/-20 5 R/5 L 10250 27 20 22 MD 167 16 3656 4396 5000 7000 +5/-20 5 R/5 L 5650 11 10 11 MD 187 18 3656 5000 5000 7000 +5/-20 5 R/5 L 5750 11 11 13 MD 247 24 3656 6596 5000 7000 +5/-20 5 R/5 L 5900 12 12 15 MD 307 30 4571 6596 6350 7000 +5/-20 5 R/5 L 9200 17 12 15 MD 367 36 5486 6596 6350 7000 +5/-20 5 R/5 L 9500 18 13 16 MD 397 39 5486 7200 6350 7000 +5/-20 5 R/5 L 9700 19 16 19 MD 487 48 5486 8796 6350 7000 +5/-20 5 R/5 L 9950 20 19 24 MD 647 64 7316 8796 6350 7000 +5/-15 3 R/3 L 11050 30 22 24 MD 687 68 7316 9400 6350 7000 +5/-15 3 R/3 L 11300 30 25 27 ll legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. ll data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development. calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & 2009 - page 48
RDIOFLET ll legal rights in this document are the exclusive property of calzavara and no part of it may be reproduced or communicated to any other party without our authorization. ll data in this catalogue is for reference only and may be changed without notice, in line with our policy of continuous technical development. + _ ZENIT L R ZIMUT Zenith zimuth Gross Packing Foundation Foundation excavation concrete surface weight volume volume volume m 2 mm mm mm mm degree degree kg m 3 m 3 m 3 GROUND MOUNTED - LG SERIES SM 066 6 2196 2741 2500 6000 +5/-20 5 R/5 L 1550 6 8 9 SM 086 8 2196 3656 2500 6000 +5/-20 5 R/5 L 1750 7 9 10 SM 096 9 2498 3656 2500 6000 +5/-20 5 R/5 L 1800 7 9 10 SM 126 12 2741 4396 2500 6000 +5/-20 5 R/5 L 2100 7 9 10 SM 064 6 2196 2741 2500 4000 +5/-20 5 R/5 L 1400 5 6 7 SM 084 8 2196 3656 2500 4000 +5/-20 5 R/5 L 1550 6 7 8 SM 094 9 2498 3656 2500 4000 +5/-20 5 R/5 L 1600 6 7 8 SM 124 12 2741 4396 2500 4000 +5/-20 5 R/5 L 1900 6 7 8 SM 063 6 2196 2741 3000 3000 +5/-20 5 R/5 L 1300 4 5 6 SM 083 8 2196 3656 3000 3000 +5/-20 5 R/5 L 1400 5 5 6 SM 093 9 2498 3656 3000 3000 +5/-20 5 R/5 L 1500 5 5 6 SM 123 12 2741 4396 3000 3000 +5/-20 5 R/5 L 1700 5 5 6 surface Zenith zimuth Gross weight Packing volume Type of wall mounting m 2 degree degree kg m 3 - WLL MOUNTED - WM SERIES WM 02 2 +0/-10 5 R/5 L 600 2 WM 04 4 +0/-10 5 R/5 L 750 2 WM 06 6 +0/-10 5 R/5 L 800 3 WM 08 8 +5/-5 5 R/5 L 1600 5 To ustomer WM 09 9 +5/-5 5 R/5 L 1650 5 specifications WM 12 12 +5/-5 5 R/5 L 2100 6 WM 16 16 +5/-5 5 R/5 L 2600 6 WM 18 18 +5/-5 5 R/5 L 2700 7 WM 24 24 +5/-5 5 R/5 L 2900 8 surface Zenith zimuth Gross weight Packing volume Type of wall mounting m 2 degree degree kg m 3 - TOWER MOUNTED - TM SERIES TM 02 2 +0/-10 5 R/5 L 600 2 TM 04 4 +0/-10 5 R/5 L 750 2 TM 06 6 +0/-10 5 R/5 L 800 3 TM 08 8 +5/-5 5 R/5 L 1600 5 To ustomer TM 09 9 +5/-5 5 R/5 L 1650 5 specifications TM 12 12 +5/-5 5 R/5 L 2100 6 TM 16 16 +5/-5 5 R/5 L 2600 6 TM 18 18 +5/-5 5 R/5 L 2700 7 TM 24 24 +5/-5 5 R/5 L 2900 8 calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & 2009 - page 49
RDIOFLET art. MPS... 22 Side-mounting frame for small (up to 6 m 2 ). This accessory, whose components are in hot-dip galvanized steel, can be installed on one side of a square tower with L-section legs, on a portion of tower with parallel sides. The item is supplied complete with fixing hardware, 2 windbraces and pipe mount (Ø 114 mm) for fixing the passive repeater. tower antenna mounts for TM series art. MPS 6020 22 Ø 114 mm SUPPLY ONFIGURTION INSTLLTION EXMPLE FRONT VIEW PLN VIEW tower leg Tower - dimensions ross member ntenna pipe mount L - section Side Ø - height m mm mm mm mm MPS 6020 22 from L60 to L90 up to 1800 2000 114 2500 MPS 1020 22 from L100 to L120 up to 1800 2000 114 2500 MPS 1320 22 from L130 to L150 up to 1800 2000 114 2500 MPS 1620 22 from L160 to L200 up to 1800 2000 114 2500 MPS 6030 22 from L60 to L90 up to 2800 3000 114 2500 MPS 1030 22 from L100 to L120 up to 2800 3000 114 2500 MPS 1330 22 from L130 to L150 up to 2800 3000 114 2500 MPS 1630 22 from L160 to L200 up to 2800 3000 114 2500 art. PRP... & PR factory painting & camouflaging Factory painting by the epoxy process is available in the following colours: Light grey (art. PRP 7035), Dark grey (art. PRP 7031), Olive green (art. PRP 6003). Painting in special colours and patterns can be provided for camouflaging and advertising requirements. Standard camouflaging (art. PR), is based on army camouflage colours and patterns. ow to order To order factory painting, add code PRP... to the passive repeater item code. To order camouflage painting, add code PR to the passive repeater item code. art. PRSF fencing Standard fencing is made of hot-dip galvanized steel grating panels and/or plastic-coated zinc metal wire mesh. It is anchored to the base of the passive repeater and covers only the area occupied by the passive repeater itself. The advantages of this fencing are: low cost, reduction of site area occupied, easy installation, no foundation works. calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & 2009 - page 50
10 20 15 1 10 20 10 20 15 1 10 20 15 1 10 RDIOFLET art. PRDI de-icing system In harsh environmental conditions, thick deposits of ice on the reflecting surface could weaken the radio signal. To overcome this problem, calzavara supplies radomes made of special, highresistance and long-life fabric. This item can also be installed on which are already in operation. Standard colours are grey or brown. ow to order To order the de-icing system, add the code PRDI to the passive repeater item code. art. PRF /S face flatness & alignment kit onsists of 4 graduated targets with magnetic or mechanical fixing, to be positioned on the reflecting face to allow operations relating to face flatness and the topographical alignment of the passive repeater. The kit does not include any topographical instruments. art. PRF - Mechanical fixing kit for aluminium face panels art. PRF S - Magnetic fixing kit for sheet iron face panels art. PRSS... steel structures for steep slopes calzavara manufactures special steel lattice structures which compensate, either partially or fully, for any differences in level of the foundation blocks, due to the site morphology. This accessory is particularly suitable for areas with steep slopes. ow to order For steel structures for steep slopes, add the item code of the selected steel structure for steep slopes to the passive repeater item code. Level difference mm PRSS 0500 500 PRSS 1000 1000 PRSS 1500 1500 h art. GRPI The kit is designed to dissipate to ground the electrical discharge picked up by the lightning protection system. grounding kit calzavara - tel. +39 0432 84381 www.calzavara.it info@calzavara.it - poles, towers, rooftop & 2009 - page 51