Power Utility Equipment

Power Utility Equipment A Complete Selection of Hard Working Tools and Accessories for the Power Utility Industry Tools Built To Go The Distance 1

Ted Clemens Director of Sales 1-215-357-5500 ext. 277 tclemens@gmptools.com Frank Zaccone Sales Manager 1-215-630-0155 fzaccone@gmptools.com Gary Cassidy Lead Sales Associate 1-215-915-0597 gcassidy@gmptools.com Carmen Martinez International/Export 1-215-357-5500 ext. 245 cmartinez@gmptools.com Buy Online: Click www.craftworktools.com to purchase on-line from a secure e-commerce stocking distributor. Orders for in-stock products placed with Craftworktools.com before 12:00 P.M. (noon) Eastern Time M-F (except holidays) will be shipped on the same business day. Orders received after 12:00 P.M. (noon) will ship the next business day. Craftworktools accepts Visa, MasterCard and PayPal. 2

General Machine Products (KT), LLC General Machine Products, a pioneer in the aerial and underground outside plant (OSP) tools, is leading the way with innovative fiber optic cable blowing and pulling products. TABLE OF CONTENTS Duct Rodding 4-7 Manhole Tools 25-29 Cable Pulling 8 Underground Tools 30-35 Cable Pushing 9 Reels 36 Line Blowing 10 Reel Handling 37 Cable Pulling Tools 11-13 Umbrellas 38 Cable Lashing 14-16 Pole Trailer Lights 39 Aerial Tools 17-23 Cutters 40 ADSS 24 Lead Cable Tools 41-43 About Us Founded by engineer George M. Pfundt in 1936, GMP started operations in a downtown Philadelphia building as a specialty machine shop doing work for the local Bell Telephone company and for the electric utility company. GMP expanded to a production shop after landing a contract with Western Electric Company and, subsequently, forming a close relationship with Bell Telephone Laboratories in Murray Hill, NJ, which enabled it to manufacture prototypes of products for experimental use within the Bell System. GMP's 100,000-square-foot manufacturing plant in Trevose is equipped with a full complement of technologically advanced machine tools manned by a well-trained team of craftspeople. Our own engineering staff conduct research & development of GMP's products using computer aided design, a prototype fabrication shop and an on-site testing facility. GMP continues to make investments in new product R&D, state-of the-art manufacturing, quality assurance, distribution and inventory control techniques, and physical plant, in order to maintain its manufacturing leadership position and its continuing ability to anticipate and meet the changing needs of work crews in the field who rely on the ruggedness, practicality and safety of GMP equipment. As our quality policy statement affirms: "GMP supplies defect-free products and service, on time, which meet its customers' expectations." In 2004, CBS Products joined forces with GMP to further enhance the global reach and breadth of our outside plant equipment capabilities. As of June 2017 the business of GMP Tools and CBS Products were acquired by Klein Tools of the USA. Renamed GMP Products (KT), LLC, we continue to be the same engineering talent and innovative solution providers. Member of 3

DUCT RODDING Continuous Duct Rodders GMP produces the best performing and most durable duct rodders available anywhere - at a price that represents the very best value. Decades of in-field use have proven this high visibility, orange rod material to have the ideal combination of the mechanical properties of tensile strength, modulus, stiffness and bending behavior. These duct rodders are essential tools for underground tasks such as cleaning and locating ducts, threading lines or pulling cables. Rodders come equipped with a male threaded end fitting and tapered head on the leading end and a female threaded fitting on the back end. Our carriers are made of tubular steel and are powder coated for corrosion resistance. Larger diameter carriers have inboard wheels for easy transport at the job site. Each carrier is fitted with a hand-operated brake to control payout. Available in standard or toneable rod. SPECIFICATIONS Nominal Size End Threads Rated Pull strength Min Bend Radius 1/4" (6.7mm) 5/16-18 500 lbs.-f (2.2kN) 7.4" (188mm) 3/8" (9mm) 3/8-16 1400 lbs.-f (6.2kN) 9" (230mm) 1/2" (12mm) 3/8-16 1800 lbs.-f (8.0kN) 18" (450mm) ORDERING INFORMATION P/N P/N Duct Rodder Sizes P/N P/N Duct Rodder Sizes Std. Rod Tonable Std.Rod Tonable 89202 N/A 1/4" (6.7mm) X 100 ft (30m) 89244 N/A 3/8" (9mm) X 1400 ft (427m) 89204 N/A 1/4" (6.7mm) X 200 ft (61m) 89245 N/A 3/8" (9mm) X 1500 ft (457m) 89206 N/A 1/4" (6.7mm) X 300 ft (91m) 89246 N/A 3/8" (9mm) X 1600 ft (488m) 89208 N/A 1/4" (6.7mm) X 400 ft (122m) 89247 N/A 3/8" (9mm) X 1700 ft (518m) 89210 N/A 1/4" (6.7mm) X 500 ft (152m) 89248 N/A 3/8" (9mm) X 1800 ft (549m) 89222 88222 3/8" (9mm) X 200 ft (61m) 89249 N/A 3/8" (9mm) X 2000 ft (610m) 89224 88224 3/8" (9mm) X 300 ft (91m) 89252 88252 1/2" (12mm) X 200 ft (61m) 89226 88226 3/8" (9mm) X 400 ft (122m) 89254 88254 1/2" (12mm) X 300 ft (91m) 89228 88228 3/8" (9mm) X 500 ft (152m) 89256 88256 1/2" (12mm) X 400 ft (122m) 89230 88230 3/8" (9mm) X 600 ft (183m) 89258 88258 1/2" (12mm) X 500 ft (152m) 89232 88232 3/8" (9mm) X 700 ft (213m) 89260 88260 1/2" (12mm) X 600 ft (183m) 89234 88234 3/8" (9mm) X 800 ft (244m) 89262 88262 1/2" (12mm) X 700 ft (213m) 89236 88236 3/8" (9mm) X 900 ft (274m) 89264 88264 1/2" (12mm) X 800 ft (244m) 89238 88238 3/8" (9mm) X 1000 ft (305m) 89266 88266 1/2" (12mm) X 900 ft (274m) 89240 N/A 3/8" (9mm) X 1100 ft (335m) 89268 88268 1/2" (12mm) X 1000 ft (305m) 89242 N/A 3/8" (9mm) X 1200 ft (366m) 89270 88270 1/2" (12mm) X 1100 ft (335m) 89243 N/A 3/8" (9mm) X 1300 ft (396m) 89272 88272 1/2" (12mm) X 1200 ft (366m) Heavy Duty Fiberglass Duct Rods Heavy-duty duct rods that screw together which provide an alternative to continuous rodders or an option to extend a compatible continuous length of rod. Each 5/8" rod is fitted with corrosion resistant 3/4"-10 NC couplers for maximum strength and durablility Longer available lengths, 5 ft (152cm) and 10 ft. (305cm), mean less components to inventory and bring to the work site 5 ft. Heavy Duty Fiberglass Duct Rod 10 ft. Heavy Duty Fiberglass Duct Rod P/N 70093 Weight: 1 lb. 8 oz. (.7kg) P/N 70094 Weight: 2 lb. 8 oz. (1.1kg) 4

Roller Guide 3/8" (9mm) & 1/2" (12mm) Roller Guide helps guide the duct rod around bends, sweeps and duct misalignments. Can also be used where a duct is already occupied with a cable. P/N 89360 Wt. 7.36 oz (.21kg) Flexible Leader The Flexible Leader is another tool used to guide the duct rod around bends, sweeps and duct misalignments. P/N 89371 1/4" (6.7mm) Wt. 1 oz (.03kg) P/N 89370 3/8" (9mm) & 1/2"(12mm) Wt. 2.24 oz (.06kg) Shackle Fitting 3/8" (9mm) & 1/2" (12mm) Shackle Fitting is used with our Tapered Heads to provide a larger pulling loop for attaching the pulling line or rope. P/N 09339 Wt..80 oz (.02kg) Swivel Coupling The Swivel Couplings connect two duct rods when one length of duct rod is not long enough for the full conduit run. Also provides a rotating swivel when pulling line, wire or rope. P/N 89380 1/4" (6.7mm) Wt..48 oz (.01kg) P/N 89382 3/8" (9mm) & 1/2" (12mm) Wt. 4.32 oz (.12kg) Male & Female Fitting Repair Kits Used as a replacement if the end fittings break off. Epoxy and installation instructions included. Std. Rod Toneable Description Wt. 89411 N/A 1/4" (6.7mm) Male.48 oz (.01kg) 89412 N/A 1/4" (6.7mm) Female.48 oz (.01kg) 89413 88413 3/8" (9mm) Male 3.96 oz (.11kg) 89414 88414 3/8" (9mm) Female 4.46 oz (.13kg) 89415 88415 1/2" (12mm) Male 2.97 oz (.08kg) 89416 88416 1/2" (12mm) Female 3.47 oz (.10kg) 89398 89398 Epoxy 2 oz (.06kg) Splice Kit Includes Epoxy, sandpaper, an inline splice and instructions to repair broken Duct Rodders. Std. Rod Toneable Description Wt. 89417 N/A 1/4" (6.7mm) 1.76 oz (.05kg) 89418 88418 3/8" (9mm) 2.88 oz (.08kg) 89419 88419 1/2" (12mm) 2.40 oz (.07kg) Duct Rodder Accessory Kits These kits come complete with the everyday essentials you ll need for your rodding. Easily attached to the frame with UV treated tie wraps, the Cordura Nylon pouch has plenty of room to store your accessories and keep them with the rodder where they belong. P/N 89424 Kit for 1/4" P/N 89425 Kit for 3/8" P/N 89426 Kit for 1/2" DUCT RODDING ACCESSORIES Tapered Heads P/N 89350 1/4" (6.7mm) Wt..16 oz (.01kg) P/N 89352 3/8" (9mm) & 1/2" (12mm) Wt..48 oz (.12kg) Sonde Adapters P/N 89384 Male 1/4" x 20 Wt. 2.08 oz (.06kg) P/N 89394 Female M10 x 1.5 Wt. 1.76 oz (.05kg) Sonde adapters will only work with 3/8" (9mm) and 1/2" (12mm) duct rodders. Other adapters are available upon request. Rod Grapple An excellent tool for rodding duct, especially for long runs when working from either end. Two loops on one half and four hooks on the other half lock together when they meet in the conduit The connecting end of each half is outfitted with 3/4"-10NC threads for easy attaching to our Fiberglass Duct Rods or our Continous Duct Rods with a rod grapple adaptor. P/N Description Weight 06931 Rod Grapple 2 lbs. (.9kg) 31501 Rod Grapple Adaptor - Male 3.68 oz (.105kg) 31502 Rod Grapple Adaptor - Female 3.68 oz (.105kg) 89386 Rod Grapple Adaptor - Set (both Male and Female) 7.36 oz. (.210kg) 5

DUCT RODDING ACCESSORIES Traceable Rod Detection Receiver C.A.T4 Locator Find, follow and map detectable duct rod and copper based cables that are located in nonmetallic duct. The receiver is an industry standard locator and provides fast, accurate and reliable providing repeatability locating with detectable duct rods or sondes. The receiver features a high-contrast, backlit LCD screen that provides the user with clear information. The intuitive and responsive interface is designed so the operator can access features with ease. Key Features: Rugged Light weight IP54 Rating you can operate it in almost any environment High contrast backlit LCD screen Battery Powered (2 x D-cells supply 30 hours use) Frequency industry standard 33 khz P/N 88273 Receiver Weight: 5 lbs. (2.3kg) Transmitter Genny4 The transmitter, an industry standard, is used with the the receiver to find, follow and map traceable duct rod. The transmitter provides an industry standard 33 khz signal. The transmitter is ergonomically designed and has a lightweight, well-balanced case. The base tray also provides storage for accessories. The transmitter comes standard with direct connection leads a ground spike. Key Features: Ergonomic robust ABS case Signal Boost button Powered by 4 x D-cells Base tray for accessories Active Frequency: 33kHz P/N 88274 Transmitter Weight: 6 lbs. (2.7 kg) and Sonde The sonde is a small self-contained transmitter that connects to the end of the duct rod. The sonde will help trace the duct route and can also locate duct blockages or collapses P/N 88283 Weight: 3 oz. (.1kg) Sonde Missile Kit The sonde missile safely carries the Sonde P/N 88283 through a duct with compressed air in order to test the integrity of a duct or precisely locate a blockage. Sonde sold separately. P/N 89396 1" Duct - SDR 9, 11, 13.5, 15.5, 17 P/N 88285 1 1/4" Duct - SDR 9, 11 P/N 88286 1 1/4" Duct - SDR 13.5, 15.5, 17, 1 1/2" Duct - SDR 9 P/N 88287 1 1/2" Duct - SDR 11, 13.5, 15.5 P/N 88288 2" Duct- SDR 9, 11,13.5, 15.5 Optional Soft Case P/N 8875 6

Powered Duct Rod Pusher With GMP's Powered Duct Rod Pusher and a 1/2" GMP Duct Rodder, the job of placing pulling lines or fiber cables just got that much easier. Hydraulically powers GMP 1/2" Duct Rodders in to and out of conduits. Pushes and pulls with forces up to 300 lbs. Rod speeds up to 130'/min (40m/min) Accurately measures footage and speed with an electronic monitoring system that works in either direction. The readout can be scaled to feet or meters. When pulling back, the fiberglass rod is placed directly back onto the cassette. Features rod access areas for wiping the rod clean during the pull back operation. Also comes with a package of rod wiper pads (P/N 32290) Duct Clamp on the machine, and the specially designed Duct Mounting Clamp Assembly (P/N 32221) provided on the rodder cassette, helps stabilize both pieces of equipment during use. Comes with a gasoline driven power pack and hoses. Pusher is mounted on a lightweight, brightly painted, tubular-steel frame that can be tilted at a 30-degree angle to the manhole to reduce initial bending of the fiberglass rod. Must order 1/2" Duct Rodder separately. Also, user must provide length of 1 1/4" innerduct between Rod Pusher and Rodder Cassette, and another length of 1 1/4" innerduct between the pusher and the duct to be rodded. DUCT ROD PUSHING P/N Description Package Weight 89004 Powered Duct Rod Pusher (calibration in feet) 210 lbs. (95kg) 89005 Powered Duct Rod Pusher (calibration in meters) 210 lbs. (95kg) Specifications: Capacity: 1000' x 1/2" (12.7mm) fiberglass rod Speed: Up to 130'/min (40m/min) Force: Pushes and pulls with forces up to 300 lbs. (136kg) Drive: Dual hydraulic motor tractor belt drive Controls: Emergency stop switch, power on/off button, hydraulic on/off control valve, hydraulic pressure display gauge, directional lever, speed control, speed and distance indicator Height: 39" (99cm) Length: 42" (107cm) Width: 27" (69cm) Weight: 210 lbs. (95kg) Ramrod Trailer Mounted Rod Pusher With GMP's Ramrod, the job of placing pulling lines just got that much easier. Hydraulically powers the trailer mounted 1000 ft capacity, 1/2" duct tracable rodder in and out of conduits. Pushes and pulls with forces up to 300 lbs. Rod speeds up to 130'/min (40m/min) Accurately measures footage and speed with an electronic monitoring system that works in either direction. The readout can be scaled to feet or meters. When pulling back, the fiberglass rod is placed directly back onto the cassette. Features rod access areas for wiping the rod clean during the pull back operation. Also comes with a package of rod wiper pads (P/N 32290) Duct Clamp on the machine, and the specially designed Duct Mounting Clamp Assembly (P/N 32221) provided on the rodder cassette, help stabilize both pieces of equipment during use. Comes with a trailer mounted gasoline driven power pack and hoses. Has large locking storage box affixed to trailer for holding tools and accessories. P/N Description Package Weight 88900 Duct Rod Pusher Trailer 1400 lbs. (635kg) 33205 Optional Spare Tire and Carrier Kit 100 lbs. (45kg) 89387 Inner Duct Attachment Tool (included with Ramrod) 15 lbs. (7kg) 89383 Duct to Duct Adapter 9 lbs. (4kg) 7

CABLE PULLING Sidewinder Fiber Optic Cable Puller The GMP Sidewinder, Trailer Mounted Fiber Optic Puller has been designed to exceed the requirements of installing underground telecommunication cables, employing a 32" diameter single capstan to provide a controlled force to the pulling rope or tape. The single capstan allows the winch to be placed at the mid point of a section to assist in the pull, thus achieving longer pulls. At 1400 lbs., the unit is easily pulled by a standard pickup truck. The power source is a commercial grade Honda GX390 gasoline engine which drives the fixed displacement tandem mounted hydraulic pumps. The rope take-up drum is removable and can be split to enable removal of rope. The capstan can be rotated through 90 on a swivel bracket from the in-line working position to the transverse transit position when in tow. When the winch is in the working mode the rear props are extended out of the chassis to provide greater stability. Specifications: Max. Pulling Capacity: 1100 lbs. (500kg) Hitch Coupling: Lunette Ring (ball coupler available) Max. Rope Speed: 200 ft/min (60m/min) Lighting Adapter: 7-Pole RV Blade (other types available) Capstan Diameter: 32" (813mm) Power Supply: Honda GX390 12 HP, Recoil Start, Overhead Valve, Cast Iron Cylinder Sleeve, 1.5 Gallon tank Load indication: Calibrated gauge bezel Length: 123" (3124mm) Main Drive: Fixed displacement tandem pumps to fixed displacement high Overall Width: 69" (1753mm) torque motors. Height: 57" (1450mm) Gear Box: In-line planetary gearbox (capstan drive) Weight: 1400 lbs. (635kg) Track: 60" (1676mm) Order: P/N 70605 Tire Size: F78-14 205/75D14 Pulldog - Overhead Line Pulling Winch The Trailer Mounted Overhead Line Winch is a compact, transportable unit for overhead line stringing work. The self-contained winch is powered by a Honda 11.7 HP gasoline engine and the precise control required is provided by the hydraulic circuit. There are drums for various applications and these are easily interchanged. The winch can be towed behind even small vehicles, and it s lightweight and can be easily positioned by one technician. Operational stability is provided by ground anchors on the tow bar or by using the towing vehicle as an anchor. The Overhead Line Winch is designed to meet the needs of overhead line engineers. The various options permit use on aerial bundle (ABC), Copper, Aluminum and ACSR Conductors. P/N 70625 Trailer Mounted Overhead Line Winch P/N 70626 Split drum for retrieving conductor P/N 70624 Drum 27.5" dia.(700mm) fitted with 2000'. (600m) of 5/16" (8mm) dia. Paraline rope. Specifications: Max. Pulling Capacity: Rope Speed Max. Length: Overall Width: Height: Weight: Hitch Coupling: Power Supply: Main Drive: 8 1100 lbs. (500kg) 170 ft./min (bare drum) 470 ft./min (full drum) 91.5" (2325mm) 55" (1400mm) 40" (1016mm) 650 lbs. (295kg) 1 7/8" ball Honda 11.7 HP, Recoil Start, Overhead Valve, Cast Iron Cylinder Sleeve Fixed displacement pump to fixed displacement high torque motor.

34519 89767 89762 89761 89763 32800 CABLE PUSHING Cable Pusher The GMP Cable Pusher has been designed to assist the laying of electrical cables. The unit has a profiled drive system to grip the cable, with a load applicator of adjustable upper rollers. The unit is hydraulically driven and is powered by a Portable Hydraulic Power Pack. Control Valve Module and Power Pack offered separately. The Cable Pusher is typically used in open trench work to assist a winch when laying large electrical cables The Pusher helps reduce the pulling tension on the cable end by pushing" at a midpoint Works with cable sizes ranging from 1.25 6" (32-152mm) in diameter The Pusher is hydraulically driven, and powered by an optional Portable Hydraulic Power Pack A profiled belt is used to grip the cable, with a load applicator of adjustable upper rollers Maximum pushing force is 1540 lbs. (700kg) and a maximum speed of 33 ft. (10m) per minute Single lever, bi-directional control with variable speed control The pushing force is adjustable through a relief valve A wide selection of accessory rollers are available to help guide the cable Specification: Cable Size: Dimensions: Max Push: Max Speed: Controls: Drive System: Min Requirement: Weight: 1.25-6" (30-150mm) O.D. 55" W x 20" L x 31" H (500mm x 1390mm x 770mm) 1543 lbs. (700kg) 33'/min (10m/min) Single Lever for Push/Pull Operations Hydraulic 4.75 gpm/870 psi (18 Ltr/min at 60 bar) 441 lbs. (200kg) 89764 Accessories 89765 89768 89766 P/N Description Weight (kg) 89760 Cable Pusher 441 lbs. (200) 89761 Control Valve Module w/hoses 32 lbs. (15) 34519 Foot Control Valve w/ Hoses 10 lbs. (4.5) 32800 Hydraulic Power Pack 205 lbs. (93) 89762 V" Frame Guide Set 43 lbs. (20) 89763 Trench Feed Roller 24 lbs. (11) 89764 Hoop Roller 11 lbs. (5) 89765 Trench Roller 12.5 lbs. (5.7) 89766 Heavy Duty Cable Roller 8.8 lbs. (4) 89767 Triple Corner Roller 26.5 lbs. (12) 89768 Trench Feed Lead Roller with Vertical Guides 48 lbs. (23) Cable Pusher for 1.25-6" (30-150mm) Power Cable P/N 89760 Weight: 441 lbs. (200 kg) 9

LINE BLOWING Innerduct Blowing Kits These kits contain the essentials for blowing 1/4 line thru a 1 1/4" or 1 1/2" innerduct. The major components are a control valve, a 1/4" rope adapter and a 1 1/4" or 1 1/2" innerduct seal-off. The kit also includes: A Chicago fitting for connecting to the air supply. A quick disconnect fitting for attachment to the sealoffs A solid plug for pressurizing ducts A protective carrying case P/N 89815 Blow Gun Kit for 1 1/4" Innerduct Weight: 4.6 lbs. (2.1kg) Duct Projectile Seal-Off Seal-Off Valve Rope Adapter Allows for a wide range of rope diameters to be used with the above control valve. P/N 29448 3/16" (5mm), P/N 29446 1/4" (6mm), P/N 29447 3/8" (10mm) Innerduct Seal-Off Featuring quick disconnects, these insert into the innerduct and twists tight for seal, utilizing the same Buttress thread as our Pulling Eyes. Duct Projectile Conduit Seal-Off P/N 89817 Blow Gun Kit for 1 1/2" Innerduct Weight: 5.9 lbs. (2.7kg) Seal-Off Valve Rope Adapter P/N Description 89803 Duct Seal-off 3/4" 89804 Duct Seal-off 1" 89805 Duct Seal-off 1 1/4" 89806 Duct Seal-off 1 1/2" 89807 Duct Seal-off 2" Foam Line Carriers for 1/2" - 6" conduit. Cleans water and debris from most conduit Durable for indefinite re-use. For use with any type of system P/N Desc. P/N Desc. 70533 1/2" 70539 2 1/2" 70534 3/4" 70540 3" 70535 1" 70541 3 1/2" 70536 1 1/4" 70542 4" 70537 1 1/2" 70543 5" 70538 2" 70544 6" Rope Adapter Parachute Inflatable Carriers for 1"- 2" conduit. Used for air-assist pulling through occupied conduits. Constructed of high denier nylon for durability. P/N Description 89830 Parachute for 1" 89831 Parachute for 1 1/4" 89832 Parachute for 1 1/2" 89833 Parachute for 2" P/N 89816 Blow Gun Kit for 4 Conduit Weight: 11.5 lbs. (5.2kg) Seal-off Control Valve Utilizing a ball valve with a safety locking lever, the Control Valve allows control of air flow. Equipped with a Chicago fitting for connecting to the air supply. Also there s a quick disconnect fitting at the end for attachment of seal-offs. Comes standard with a solid plug in lieu of rope adapter for pressurizing ducts. P/N 89801 Weight: 3 lbs. (1.36kg) Conduit Seal-Off When used with the control valve the conduit seal-offs securely fit into a duct with a turn of the wing-nut handle, expanding the two rubber plugs for a firm seal. 15 psi (1 bar) maximum. P/N Description 89808 Conduit Seal-off 2" 89809 Conduit Seal-off 3" 89810 Conduit Seal-off 3 1/2" 89811 Conduit Seal-off 4" 89812 Conduit Seal-off 4 1/2" 89813 Conduit Seal-off 5" Duct Projectiles for 1"- 6" conduit. Flexible rubber cones are durable for many repeated uses Fast and efficient for long runs with easy pullback P/N Description P/N Description 70505 1" for Duct 70513 2" for Duct 70506 1 1/4" for Duct 70514 2 1/2" for Duct 70508 1 3/8" for Duct 70515 3" for Duct 70509 1 1/2" for Innerduct 70516 4" for Duct 70510 1 1/2" for Duct 70517 5" for Duct 70511 1 7/8" for Duct 70518 6" for Duct 70512 2" for Innerduct Missile Line Carriers for 2"- 6" conduit. Fast blowing and vacuuming of 2-6" diameter conduit by low-friction plastic carriers. Easily removed from conduit if stuck or jammed. P/N Description 70527 Missile for 2" conduit 70528 Missile for 3" conduit 70529 Missile for 4" conduit 70531 Missile for 5" conduit 70532 Missile for 6" conduit Inline Pressure Gauge Placed inline between the control valve and an innerduct seal-off or conduit seal-off to accurately measure blowing pressures. P/N 70699 Weight: 1.5 lbs. (.68kg) 10

Cable Pulling Harnesses This convenient product will allow multiple pulls at one time by attaching 2 to 4 cables or ducts to the Puller. The slings are manufactured from aircraft quality wire rope. The various legs are staggered in length so the individual connections are not interfering with each other. The lead coupler can be easily dismantled to change out a leg or to add another leg. Each leg is marked with load capacity and they are pull tested to 3 times that rating. The safety factor of 3:1 is based on equal pull on all cables, (horizontal pull only). Other sling configurations are available upon request. P/N Number of Legs Maximum Harness Width Safe Working Load (3:1) Wire Rope Diameter Leg Lengths 70298 3 2 1/4" (57mm) 2000 lbs. (9kN) 1/8" (3mm) 7", 10", 15" 70299 3 3 1/8" (79mm) 5800 lbs. (26kN) 1/4" (6mm) 10", 18", 26" 70300 3 3 1/2" (89mm) 8400 lbs. (37kN) 3/8" (10mm) 16", 25", 36" 70312 4 2 1/4" (57mm) 2000 lbs. (9kN) 1/8" (3mm) 7", 10", 15",19" 70313 4 3 1/8" (79mm) 5800 lbs. (26kN) 1/4" (6mm) 10", 18", 26", 35" 70314 4 3 1/2" (89mm) 2000 lbs. (9kN) 3/8" (10mm) 16", 25", 36", 48" Break-away Swivels Our Break-away Swivels give you invaluable protection when pulling either fiber optic or coaxial cable. These simple tools provide an inexpensive fracture point between the pulling line and cable avoiding costly cable damage by preventing the cable s rated pulling capacity from being exceeded. The swivels are available in two diameters; 7/8" (22.23mm) made from high quality aluminum and 5/8" (15.88mm) made from steel. The 5/8" size is extremely convenient when working with innerduct sizes below 1 5/8" in diameter. The design of the swivels incorporates a replaceable tension bolt that joins the barrel eye and swivel body. The bolt separates when pulling loads on the cable reach +/-5%. The damaged bolt can then be replaced in seconds using the Allen wrench (included) and screwdriver. Flexible Pulling Grips Pulling Grips, sometimes referred to as pulling socks or stockings, are indispensable in many different cable pulling applications. Manufactured from high-tensile, galvanized steel wire that is evenly hand woven in a single, double or triple wire weave according to pulling tension requirements. We reverse weave our grips which create a loop at the end of the grip instead of being crimped or soldered together. The wire is then joined under the crimped head. This creates a higher quality product that outlasts the competition. Single Weave P/N Diameter Range Min. Breaking Grip Length 70660.24-.51" (6-13mm) 1984 lbs. (900kg) 11.81" (300mm) 70661.47-.75" (12-19mm) 3505 lbs. (1590kg) 21.65" (550mm) 70662.75-.98" (19-25mm) 4674 lbs. (2120kg) 23.62" (600mm) 70663.98-1.5" (25-38mm) 5644 lbs. (2560kg) 27.56" (700mm) Double Weave P/N Diameter Range Min. Breaking Grip Length 70670.39-.79" (10-20mm) 4101 lbs. (1860kg) 23.62" (600mm) 70671.79-1.18" (20-30mm) 4974 lbs. (2256kg) 23.62" (600mm) 70672 1.18-1.57" (30-40mm) 8148 lbs. (3696kg) 23.62" (600mm) 70673 1.57-1.97" (40-50mm) 12103 lbs. (5490kg) 23.62" (600mm) 70674 1.97-2.56" (50-65mm) 12103 lbs. (5490kg) 23.62" (600mm) 70675 2.56-3.15" (65-80mm) 16138 lbs. (7320kg) 23.62" (600mm) 70676 3.15-3.74" (80-95mm) 16138 lbs. (7320kg) 23.62" (600mm) 70677 3.74-4.33" (95-110mm) 23398 lbs. (10613kg) 35.43" (900mm) 5/8" Break-Away Swivel Break Point Color Code P/N Swivel P/N Repl Bolt 200 lbs. (91kg) Orange/White 71399 26309 220 lbs. (100kg) Red/White 71400 26310 295 lbs. (134kg) Green/White 71401 26305 340 lbs. (154kg) White 71402 30333 400 lbs. (181kg) Blue/White 71403 26306 420 lbs. (190kg) Yellow/White 71404 26307 435 lbs. (197kg) Violet/White 71405 26308 450 lbs. (204kg) Orange 71406 25494 500 lbs. (226kg) Violet 70188 26325 600 lbs. (272kg) Yellow 71408 25493 700 lbs. (317kg) Brown 70191 26326 7/8" Break-Away Swivel Break Point Color Code P/N Swivel P/N Repl Bolt 340 lbs. (154kg) White 53700 30332 450 lbs. (204kg) Orange 53701 34786 600 lbs. (272kg) Yellow 53702 34341 800 lbs. (364kg) Blue 53703 34342 1,000 lbs. (454kg) Green 53704 34343 1,200 lbs. (544kg) Red 53705 34344 Triple Weave P/N Diameter Range Min. Breaking Grip Length 70680.24 -.51" (6-13mm) 4960 lbs. (2250kg) 25.59" (650mm) 70681.47 -.75" (12-19mm) 7452 lbs. (3380kg) 32.48" (825mm) 70682.75 -.98" (19-25mm) 12214 lbs. (5540kg) 40.35" (1025mm) 70683.98-1.26" (25-32mm) 21054 lbs. (9550kg) 51.18" (1300mm) 70684 1.26-1.50" (32-38mm) 25256 lbs. (11456kg) 55.12" (1400mm) Double Weave-Double Flexible Eye Lace Up Grip P/N Diameter Range Min. Breaking Grip Length 70664.47-0.75" (12-19mm) 2250 lbs. (1020kg) 27" (685mm) Double Weave - Double Flexible Eye Lace Up Grip CABLE PULLING ACCESSORIES 11

CABLE PULLING ACCESSORIES Ball Bearing Swivels These tough swivels are designed to handle higher thrust loads for extra cable safety and faster straight pulls. Precision-machined body is made of high quality stainless steel with higher working load ratings than comparably sized swivels available on the market. These heavy-duty swivels are built with a thrust bearing for tensile load and a radial bearing for bending load. Working Load Limit for underground applications is based on a horizontal pull of 3:1 while aerial applications have a WLL of 5:1. Ball Bearing Swivels P/N Working Load Limit Under Ground lbs. (kn) Working Load Limit Aerial lbs. (kn) Eye Width in (mm) Dia in (mm) Length in (mm) Weight lbs. (kg) 70136 2,250 (10.0) 1350 (6.0) 3/8 (9.5) 7/8 (22) 3 3/8 (86 ).45 (.20) 70137 5,000 (22.2) 3000 (13.3) 17/32 (13.5) 1 1/4 (31.8) 4 5/32 (105.6).95 (.43) 70138 7,000 (31.1) 4200 (18.7) 9/16 (14.3) 1 3/8 (34.9) 4 19/32 (116.7) 1.35 (.61) 70139 10,000 (44.5) 6000 (26.7) 11/16 (17.5) 1 5/8 (41.3) 5 7/16 (138.1) 2.2 (1.00) 70140 25,000 (111.2) 15000 (66.7) 1 1/32 (26) 2 1/2 (63.5) 9 5/8 (244.5) 7.6 (3.45) Innerduct Pulling Eyes These rugged zinc-plated steel pulling eyes allow innerduct placement to become a faster, safer operation. Easy insertion by rotating the pulling eye into the innerduct allows the threads to make the connection. A convenient hole in the threaded end of the pulling eye body is used to tie off the innerduct pulling line or tape keeping it from being lost during the pulling operation. Our Swiveling Innerduct Pulling Eyes eliminate the need to use a separate swivel between the winch line and innerduct. The hex portion of the Swiveling Innerduct Pulling Eye allows use of a wrench to make the final turns when inserting into innerduct. Innerduct Pulling Eyes P/N Fixed P/N Swivel Nominal Duct Dia Max Duct Dia 60510 61510 1" & 1 1/8" (25.4-30.0mm) 1.50" (38.1mm) 60512 61512 1 1/4" & 1-3/8" (31.8-35.1mm) 1.75" (44.4mm) 60515 61515 1 1/2" (38.1mm) 2.00" (50.8mm) 60520 61520 2" (50.8mm) 2.50" (63.5mm) Pulling Eye Length P/N Overall Length 60510 5 1/8" 60512 5 1/8" 60515 5 3/4" 60520 5 3/4" 61510 5 9/16" 61512 5 19/32" 61515 6 9/32" 61520 6 13/32" Expanding Jaw Pulling Eyes GMP s line of Expanding Jaw Pulling Eyes are designed for the installation of 2-6" diameter Polyethylene Pipe in wall sizes ranging from SDR 9 thru SDR 21 and Sch 40. The SDR designation determines the pipe minimum wall thickness. To calculate a particular pipes wall thickness simply divide its nominal outside diameter by its SDR value. For example a 4" Pipe that is designated SDR 11 will have a minimum wall thickness of.409" (4.5" / 11 =.409"). The one-piece cone design incorporates a full sleeve, which completely encloses the jaws. During set-up and operation this sleeve prevents the polyethylene pipe from over expanding and rupturing. Key components are hardened alloy steel to ensure that the pulling eye will not fail before the pipe. A swiveling eye nut provides for the attachment of a pulling line. The Pulling Eyes will accommodate O.D. controlled pipe only. Expanding Jaw Pulling Eyes P/N Nom. Pipe Size SDR Size Range Weight 70409 2" 9 thru 21 2.8 lbs. 70410 2-1/2" 11 thru 21 3.7 lbs. 70411 3" 11 thru 21 6.6 lbs. 70412 4" 11 thru 21 12.3 lbs. 70413 5" 9 thru Sch 40 22.7 lbs. 70414 6" 11 thru Sch 40 34.2 lbs. 12

Rope To Rope/Swivel Connectors Rope to Rope Connector This connector is used to connect two ropes of up to 7/8" (22mm) diameter. Rated @ 15,000 lbs. (6804kg) max. load, this connector is made entirely from Stainless Steel. Safety factor for load is 3:1 (horizontal pull only). Rope to Swivel Connectors These Stainless Steel connectors maximize usefulness by catering to the same rope capacity and using different ends to attach to the most popular swivel sizes. The sheaves run on clevis pins which are also available as spares. Safety factor for load is 3:1 (horizontal pull only). Rope To Rope/Swivel Connectors P/N Description Working Load Limit 3:1 Safety Factor lbs. (kn) Dia in (mm) Length in (mm) Weight lbs. (kg) 71130 Rope to Rope Connector 15,000 (66.7) 2 (50.8) 5 1/2 (140 ) 2.7 (1.2) 71131 Rope to Swivel Connector 1/2" 7,000 (31.1) 2 (50.8) 5 5/16 (135) 2.1 (.95) 71132 Rope to Swivel Connector 21/32" 15,000 (66.7) 2 (50.8) 5 3/8 (137) 2.3 (1.04) Heavy Duty Connectors The Heavy Duty Connector connects two items with lugs or wire loop fittings. Typical application is to connect a wire mesh pulling grip to the pulling line. Manufactured from high strength Stainless Steel with hardened screws. The two smaller sizes have slotted screws while the two larger ones have socket head screws. 3:1 Safety Factor when used in underground applications. CABLE PULLING ACCESSORIES Heavy Duty Connectors WLL 3:1 safety A B C D Weight P/N factor lbs. (kn) in (mm) in (mm) in (mm) in (mm) lbs. (kg) 71140 2500 (11.12) 7/8 (22) 3/8 (9.5) 5/16 (8) 2 1/8 (54).2 (.1) 71141 5000 (22.24) 1 1/4 (32) 17/32 (13.5) 13/32 (10) 2 7/8 (73).5 (.23) 71142 9000 (40.03) 1 1/2 (38) 19/32 (15) 1/2 (13) 3 3/8 (86).8 (.36) B Connecting Link These time-tested, split sister hooks" or figure-8" links let you join two pulling lines together, and consist of two E-shaped, forged steel parts held together with a metal pin. Swivel the two halves open to insert the looped end of the each pulling line, then close and secure the link with a few turns of 2" friction tape around the center. B Connecting Links P/N SIZE WLL WEIGHT 80771 1/4" 1000 lbs. (453kg).1 lb. (.02kg) 80773 3/8" 1500 lbs. (680kg).3 lb. (.08kg) 80775 1/2" 3000 lbs. (1359kg).5 lb. (.25kg) 80777 3/4" 6000 lbs. (2718kg) 1.5 lbs. (.75kg) 80779 1" 15000 lbs. (6795kg) 3.0 lbs. (1.5kg) 13

CABLE LASHING J2 Cable Lasher The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire. Will lash any single or multiple aerial cables up to 3" (76mm) diameter across on any suspension strand from 1/4" (6mm) to 7/16" (11mm). A factory modification will allow the lasher to accommodate 1/2" (12.7mm) strand if necessary. Each of two recessed magazines will hold a 1200 ft coil of.045" (365m of 1.1mm wire) lashing wire (or 450 ft of.065"). The Lashing Wire is fully recessed and covered by a gate. J2 Lashers make over-lashing easy. Just push down on the strand roller knob, rotate it a quarter turn and you can lash additional cables together on previously lashed cable. Positive internal gear to gear mechanism has no chains or belts to stretch, slip or break. Constructed with heat-treated, plated steel, stainless steel, brass and aluminum components. Contains sealed and oil-less bearings to minimize maintenance and assure durability. The lasher is furnished with a rugged lightweight storage chest with corrosion resistant hardware, recessed latches and a moisture-proof, tongue-in-groove design for maximum protection when not in use. Ordering Information P/N Description Package Weight 86070 J2 Cable Lasher 46 lbs. (20.9kg) C2 Cable Lasher Our compact Model C2 Cable Lasher is perfect for lashing smaller diameter aerial cables to supporting strand with stainless steel lashing wire. The new design improvements make the C2 equally suited for new construction or overlashing up to its full 1 7/8" bundle capacity. Lashes single or bundled cables up to 1 7/8" (46mm) onto strand sizes 1/4" to 3/8" (6-10mm) diameter. New style strand lock swings out of the way for unobstructed overlashing. Simple wire routing yields either normal" or loose" wire tension. Dual wire magazines for loading two coils of stainless steel lashing wire. Typical wire dimensions: 1200 ft x.045" (365m x 1.1mm) or 1600 ft x.038" (487m x 1mm). Lightweight and compact: Unloaded weight 35 lbs. (16kg); only 10" O.D. x 18.5" long (25 x 47cm). The C2 s tapered housing eases passage through treed areas. Ordering Information The C2 Cable Lasher is furnished with a 6 ft (1.6m) bridle rope with snap hooks, P/N Description Package Weight an instruction manual and a rugged, lightweight storage chest. 71422 C2 Cable Lasher 35 lbs. (15.9kg) Like all GMP lashers, the C2 is built to last for many years of service. Components are CNC machined from alloy steel, stainless, bronze and aluminum castings to exacting tolerances and treated to withstand corrosion. Gear drives and sealed bearings assure maximum durability with minimal maintenance. 14

Super G Cable Lasher The largest of the GMP Lashers, this unit is designed to lash large single or combination of aerial cable up to 5" diameter to a supporting strand. Can be used for new installs or with existing cables in place. Lashes cable from about 2-1/2" to 5-1/4" outside diameter or multiple cables up to 5-3/4" combined outside diameter Lashes on strand from 11/32" to 1/2" diameter with one or two spiral wrappings of.061" or.065" diameter stainless steel wire Nominal spacing between wraps is approximately 18-19" (46 to 48cm ) Parallel-pull capability overcomes most terrain obstacles Wire tension constant regardless of amount on spool No lasher backroll when pulling force removed Front rollers guide cables through the machine All smooth edges throughout help protect against cable damage Ergonomic design makes it easy to handle Each lasher includes a 6 ft. bridle rope assembly with snap hooks, an information and operations manual and a heavy duty storage chest Lasher weighs 58 lbs. without wire CABLE LASHING Ordering Information P/N Description Package Weight 10505 Super G Cable Lasher 58 lbs. (26.3kg) 70190 Towing Lanyard 35' (10.66m) 6 lbs. (2.7kg) Lashing Wire Stainless Steel Lashing Wire is used in a lasher to lash an aerial cable or combination of cables to a supporting strand. A specially controlled annealing process yields a uniform, fine grain structure throughout wire length and cross section for best results. The GMP lashing wire is packaged as 6 coils per carton for your ordering convenience Is available in a 430, 302, and 316 stainless steel alloy. How Much Lashing Wire to Buy? First Buying Tip: When estimating the length of lashing wire required for a job, multiply the distance to lash by the following %: Cable Bundles up to 1 1/2" (3.8cm) Add 5% Cable Bundles from 1 1/2" to 3" (3.8 7.6cm) Add 10% Cable Bundles above 3" (7.6cm) Add 20% Second Buying Tip: Double your quantity when double lashing! SPECIFICATIONS: P/N Alloy Dia. Inch Ft. Coil Mtr. Coil Wt. Coil 71530 430.045 1200 365.8 6.5 lbs. 71532 430.065 450 137.2 5.3 lbs. 71533 302.045 1200 365.8 6.3 lbs. 71534 316.045 1200 365.8 6.4 lbs. 71535 302.038 1600 487.7 6.3 lbs. 71541 316.065 450 137.2 5.3 lbs. ORDERING INFORMATION: P/N Coil Coil Dia. Width Coil Pkg. 71530 5.38" 1.81" 6 71532 5.50" 1.69" 6 71533 5.38" 1.81" 6 71534 5.38" 1.81" 6 71535 5.38" 1.81" 6 71541 5.50" 1.69" 6 15

CABLE LASHING Apollo Cable Lasher Perfect for all telcom cable construction, including Coaxial and FTTx cable. With its light weight and parallel-pull capability, you ll string cable quickly and easily, over all outside plant cable routes. No other lasher or cable spinner will give you all of these advanced features and operating benefits: Under 39 lbs., (17.7kg) without wire, 12 1/2" (318mm) diameter Lashes any telecom cable/innerduct combination up to 4" (10cm) diameter Parallel-pull capability overcomes all terrain obstacles Interference-free over-lashing with no modifications Positive slip-free gear drive (no belts) tested in excess of 1 million cycles Lashes to strand sizes 1/4" to 3/8" (6-10mm) diameter Holds two coils of industry standard wire.045" x 1200 ft (1.1mm x 365 m) or.038" x 1600 ft (1mm x 488m) Provides adjustable tension of lashing wire, affording tight or loose lash Wire tension constant regardless of amount on spool No lasher back-roll when pulling force removed Front rollers guide cables through the machine All smooth edges throughout provide 360 protection against cable damage Manual clutch release allows speedy span transfers Ordering Information P/N Description Package Weight 70400 Apollo Cable Lasher 47 lbs. (21.3kg) Each Apollo lasher also includes a 6 ft (2m) towing bridle and a rugged, weather-tight storage chest to securely protect your lasher investment while it s not in use. Sierra Cable Lasher Now you can depend on the same GMP quality as our larger machines in a new smaller package... Announcing the SIERRA Cable Lasher from GMP Tools. Uses our full-size, industry-standard annealed stainless steel coils of lashing wire available in diameters of.038" x 1600 ft (.97mm x 487m) or.045" x 1200 ft (1.14mm x 365 m) Single lashes cables and wires from drop wire size up to 1.9" (50mm) maximum outside diameter. Lashes on strand sizes down as small as 3/16" or 5mm in all the way up to 1/2" or 12mm This lasher drum makes one revolution for every 13" (33cm) of travel leaving the wire helically wound around the strand/cable(s) bundle creating one support per revolution. Made from high-quality materials and precision machined just like its bigger brothers, the SIERRA lasher is ideal for lashing smaller wires and cables where a bigger machine is simply too much. The SIERRA lasher can be pulled equally as easy from below or from directly ahead. Weighs only 19 lbs. (8.6kg) without wire Overall size: 15 x 10 x 10" (38 x 25 x 25cm) Ordering Information P/N Description Package Weight 71500 Sierra Cable Lasher 19 lbs. (8.6kg) 16

Lasher Repair GMP maintains a Lasher Service Center in Trevose, PA. It is staffed by experts with decades of hands-on experience in overhead equipment servicing. And it has a complete in stock inventory of almost every major part ever made for our lasher line. The result? No matter how old your lasher is, or what repair it needs, we can usually guarantee its repair and delivered back to you in field-ready shape in 10 working days or less. When you send your lasher to GMP for service, we thoroughly inspect components and recondition or replace each component with original quality parts, then line test the complete assembly before shipping it back to you... so you can be sure your lasher will return in top notch condition, ready for many more miles of hard work. Quality construction and prompt, first rate service: GMP has the combination you need to get the most value from your lasher investment. CABLE LASHING Expert, Skilled Lasher Craftspeople Quality Safety Check of All Components Complete Solvent Bath & Fresh Lube New Towing Bridle & Manual Included with All Repairs Special 90-Day Service Guarantee Original GMP Parts Repairs for All Tools by GMP including Reels, Blowers, Gauges, Hand Tools and Strand Tension meters Parts discount when GMP does the repair D Lashing Wire Clamp All steel clamp securely attaches two lashing wires or a #6 ground wire on 1/4 to 7/16" (6-11mm) strand Two grooved plates fit on opposite sides of the strand Mechanical galvanized finish provides extra corrosion resistance Packaged 100 pcs. per box P/N 07886 Weight: 15 lbs. (6.8kg) E Lashing Wire Clamp Similar to the D Lashing Wire Clamp, this one-piece stamping is formed to fit on opposite sides of the strand. Offered in two sizes for standard strand and large strand Packaged 100 pcs. per box P/N 81460 for 7/16" (11mm) 100/box Weight: 11 lbs. (5.0kg) P/N 81461 for 9/16" (14mm) 100/box Weight: 11 lbs. (5.0kg) Lashing Wire Grip Used to temporarily secure lashing wire under tension prior to placing a permanent D or E Lashing Wire Clamp Designed with a single-groove to accommodate any size strand P/N 08605 Weight: 10 oz. (0.3kg) Speedigrip Lashing Wire Grip A vise type locking grip used to temporarily fasten lashing wire under tension before placing a permanent clamp like our D or E Lashing Wire Clamps. Grip works with any size lashing wire Just squeeze the handles together, and the grip automatically locks in place on the wire and strand Single groove accommodates any size strand P/N 01384 Weight: 1 lb 4 oz. (.56 kg) 17

AERIAL TOOLS F Cable Block This block is similar to the D Cable Block, but is also used for overlashing cables up to 2 3/4" (70mm) in diameter Optional spring loaded keeper available to keep lighter cables on the roller for the highest level of cable security Steel inserts on the underside of each strand hook provide smoother sliding during lashing and less wear Bi-Directional cam keeps block locked" on strand during pull-out, but will slide with lasher during lashing operation P/N 08093 Weight: 3.8 lbs. (1.7kg) D Cable Block Used on 1/4 to 3/8" (6-10mm) strand and can support a single cable up to 2 3/4" (70mm) in diameter Steel inserts on the underside of each strand hook provide smoother sliding during lashing and less wear Bi-Directional cam keeps block locked" on strand during pull-out, but will slide with lasher during lashing operation P/N 72680 Weight: 3.8 lbs. (1.7kg) G Cable Block This block is functionally similar to our D Cable Block. This larger tool can be used with the G Cable Lasher to handle cable up to 5" (127mm) and features strand hooks to accommodate 3/8-3/4" (10-19mm) diameter strand. This heavy duty block is made from 100% heat treated aluminum alloy Contains two vertical side rollers in addition to the cable sheave to minimize cable friction during pulling in P/N 01051 Weight: 6 lbs. (3kg) Multi Sheave Cable Blocks Heavy duty Multiple Sheave Cable Blocks are used to simultaneously support two, three, or four cables prior to lashing to a supporting suspension strand. The three sheave multiple cable block can keep up to three 2 1/2" (63mm) diameter or smaller cables separate until you re ready for lashing to the messenger The three sheave block is ideal for triplexing cables in the electrical industry; that is lashing up to three 750 MCM cables together to a supporting strand The four sheave multiple cable block can handle up to four 1 1/2" (38mm) diameter or smaller cables at one time Parts are available for end user replacement. All the GMP Multiple Cable Blocks feature heat treated aluminum alloy frame and sheave, with Oilite bearings on the sheave and steel inserts on the strand hooks for easier movement. A bidirectional lever operated cam locks the block in place during pulling in, then automatically releases during lashing. 3 Sheave Block P/N 10553 Weight: 15 lbs. (7kg) Universal HD Cable Block Pusher This simple tool makes the lashing process smoother by maintaining the proper cable lead between the lasher and the cable block. The slotted tube has rotatable sleeves at each end to lock the unit on the strand. Standard length 24" (61 cm) P/N 70018 Weight: 2.4 lbs. (1.1 kg) 18

Fixed Hinge Cable Block Used as a stationary block during the pulling in of heavy duty cable up to 6" in diameter. A 7/8" hex actuates a screw vise to grip the strand and keep the block in a stationary position Available for strand sizes 3/8 to 9/16" (10-14mm) Capacity for up to 6" (152mm) diameter cable and safe working load of 2000 lbs. (900kg.f) After cable and support rings are in place, the block hinges open at one side for removal P/N 70430 Weight 11 lbs. (5kg) 3 Roller Starter Block Used as a starter block during the pulling in of heavy duty cable up to 6" (152mm) diameter as it is pulled from a stationary or moving cable reel. Has three rollers that guide the cable with minimal friction Cable pulled through the block has a minimum bending radius of 17" (432mm) Designed for use with larger cables up to 6" (152mm) in diameter, i.e. 750 MCM Tri-Plex Conductors Has a heavy duty aluminum frame with stainless hardware A 7/8" hex actuates a screw vise to grip 3 Roller Starter Block the strand and keep the block in a stationary position Can be used on strand sizes 3/8 to 9/16" (10-14mm) Capacity for up to 6" (152mm) diameter cable and a safe working load of up 2000 lbs. (900kg) P/N 75268 Weight: 36 lbs. (16kg) Cable Pulling Sled The Pulling Sled is used for aligning two or three cables in our multiple cable block when pulling overhead cable into position prior to lashing. It incorporates either a 5000 or 7500 lb. capacity swivel on the front end and three 5000 lb. capacity swivels on the back end. It is generally used with any conventional winching device. The 22" (56cm) chain provides both alignment and stability. P/N Description Weight 70649 Cable Pulling Sled 15 Lbs. (7kg) 70626 Sled with Swivels 20 Lbs. (9kg) AERIAL TOOLS Overlash Aerial Cable Guide The Dual-Lashing Aerial Cable Guide is used to guide and straighten cables as they are pulled into a lashing position from a stationary or moving cable reel. This unit offers the versatility of working for new installations or for overlashing cable to existing plant Has a 2 3/4" cable capacity Cast aluminum shoe with a steel insert on the face provides longer wear life The shoe is suspended on steel straps from two strand rollers with safety lock preventing it from falling from the strand All steel frame parts are plated for corrosion resistance P/N 08007 Weight: 11 lbs. (5kg) Roller Type Aerial Cable Guide The Roller Type Aerial Cable Guide is used to guide and straighten cables as they are pulled into a lashing position from a stationary or moving cable reel. With its three sheaves to guide cable with minimum friction, this is the best tool you can use when handling especially heavy cable, or when using an aerial basket for drive-off lashing The guide rides along the strand on a roller bearing for smooth movement A built in grip prevents back rolling during span transfers Also included with the guide is a safety chain to prevent the guide from coming off the star You can connect our Three Roller Cable Guide to the front of a J2 Lasher* equipped with a Hitch Weldment, or to a F, J, or J2 Lasher with a Hitch Field Kit. Guide attaches to front of J2 Lasher gear housing via an optional hitch weldment affixed to the lasher. Ordering Information P/N Description Package Weight 91604 Three Roller Overhead Cable Guide for 2 3/4" Cable 30 lbs. (14kg) 91605 Three Roller Overhead Cable Guide for 4" Cable or bundles to 4" 30 lbs. (14kg) 19

AERIAL TOOLS Multi-Angle Cable Block The Multi-Angle Cable Block adjusts itself to a bending radius from 12" (305mm) maximum down to a straight line to reduce friction when pulling cables around a corner. This pole-mounted aerial block is used in stringing applications that call for placing lashed or single mode cables up to 5" (127mm) in diameter, such as 3 bundled 750 MCM cables or equal. All aluminum, heavy-duty construction Attaches to a pole with an inclusive, steel chain binder P/N 71543 Weight: 63 lbs. (29kg) 1 1/2 Ton And 3 Ton Manually Lever Operated Link Chain Hoists R-CH Series hoists feature a time tested and field proven ratchet & pawl design for transmission and distribution applications Light weight, compact design that is simple and easy to operate Minimal head and face room are required for operation The high strength cast steel alloy construction will provide unmatched resistance to shock and fatigue Hoist may be rigged for use in lifting, pulling or binding applications from any position Safety hooks rotate 360 degrees and feature spring latches to provide secure support and load connections 5 Foot Standard lift Manufactured to meet or exceed ASME B30.21 P/N 87268 1 1/2 Ton Weight: 15.25 lbs. (6.9kg) P/N 87269 3 Ton Weight: 21.25 lbs. (9.6kg) Strand Pullers & Havens Grips Used when pulling and tensioning suspension strand Strand pullers come equipped with a safety chain in the event the grip accidentally disengages Havens grips are used when light, compact grip is desired, and where conductor damage is not a factor P/N Description Strand Size (mm) Pulling Load (kg) Weight (kg) 68490 B Strand Puller Figure-8 Poly Jacket 1/4" (6) 5000 lbs. (2268) 6.7 lbs. (3) 68491 H Strand Puller 3/8" 1/2" (9.5 12.7) 10,000 lbs. (4535) 15.5 lbs. (7) 68492 L Strand Puller 3/16" 7/16" (4.7 11) 5000 lbs. (2268) 6.3 lbs. (2.9) 69494 Chicago Grip Bare Wire.08"-.2" (2-5.1) 1500 lbs. (680) 1.5 lbs. (.7) 87201 Havens Grip 1/8" 1/2" (3.2 12.7) 5000 lbs. (2268) 2.1 lbs. (1.1) 68493 Havens Grip 3/8" 7/8" (9.7 22.4) 8000 lbs. (3636) 4 lbs. (1.8) 90 3 Roller Inside Corner Cable Guide Often called the Banana Bar", this guide consists of a curved steel frame that accommodates five 3 roller cable blocks that clamp to the frame. Each block can handle up to three 2 1/2" (64mm) diameter cables. Each end of the frame clamps onto the strand at either side of the pole. An eye bolt in the center of the frame allows for the securing of the frame to the pole. This 90 guide has a cable bending radius of 25" (625mm). All attaching screw vise clamps accept a 1" (25mm) lag wrench. The unit is painted safety yellow. Ordering Information P/N Description Weight 71563 Guide, complete with blocks 110 lbs. (50kg) 28249 Replacement block only 15 lbs. (7kg) 20

Electric Capstan Hoist Kit - 89610 This versatile 1,000 lbs.(454kg) capstan is the perfect partner for overhead and underground lifting and pulling applications. The unit is small and lightweight, making it perfect for use in remote and limited access areas. Safety Features: 1,000 lbs. capacity (454kg) Lightweight (only 38 lbs. (17.2kg) w/o universal bracket) Power Source: 115 Volt AC 40 ft./min (12m/min) Rope Speed @ 1,000 lb.(454kg) load Remote Foot Control Switch included Steel capstan drum with larger radius at load-line wrap and zinc-plated rope surface. Simplify Heavy Tasks: Raising Transformers Hoisting Heavy Insulators Stringing and Tensioning Setting Utility Poles Pulling Underground Cable Steel Case P/N 89620 (Included) (Not intended for use as shipping container) Weight 36 lbs. (16.3kg) AERIAL TOOLS Universal Bracket P/N 89622 (Included) May be used as a flat mounted angle bracket, or pole mounted using the chain binders Weight 26 lbs. (11.8kg) Capstan shown with Universal Bracket Typical Capstan Setup Rope Lock Device P/N 89621 (Included) Eliminates the need to tie off the rope Weight 2 lbs. (.9kg) Hitch Mount P/N 89623 (Optional extra) Fits standard 2" receiver Used with Universal Bracket Weight 38 lbs. (17.2kg) Electric Capstan Hoist Kit Order P/N 89610 Weight 112 lbs. (50.8kg) Electric Capstan Hoist and Foot Switch (Included) P/N 89600 Weight 48 lbs. (21.8kg) Lightweight Capstan Winch The machine consists of an gasoline engine driving a right angle gear reduction unit which outputs to a small capstan. The assembly is frame mounted and positioned over a manhole for lifting or pulling operations. Unit lifts or pulls up to 2200 lbs. (1000 kg) Powered by a commercial duty 8 HP Honda engine directly coupled to a right angle gearbox results in low maintenance and high reliability Frame manufactured from zinc plated tubular steel Crossbar stabilizer stores in unit s frame for compact transport and storage P/N 70627 Weight: 218 lbs. (99 kg) 21

AERIAL TOOLS Traveling Ground Kit The grounding roller provides a means of maintaining a continuous ground connection to moving conductors such as strand, open wire, or pull line being placed from a stationary reel. The roller must be connected to a suitable ground by means of one of the 1/0 jumper cables provided in order to provide a path to ground on the conductors mentioned above in the event of an accidental contact with an energized power conductor. Kit comes complete with: 1 each, aluminum, 3 roller, traveling ground equipped with two 5/8" (16mm) buss bars for 2 jumper cable and clamps and two each, 1" (25mm) tie back holes in frame. 1 each, jumper cable composed of 30' (9.1m), 1/0, clear PVC jacketed, copper jumper cable with each end fitted with copper compression ferrules and two 5/8"- NC threaded bronze grounding clamps. 1 each, jumper cable composed of 2 ft (.61m), 1/0 clear PVC jacketed, copper jumper cable with each end fitted with copper compression ferrules and two 5/8"- NC threaded bronze ground clamps. 1 each, instruction card which outlines use of grounding kit as per OSHA requirements. Consult factory for jumper lengths. P/N 71637 Weight: 29 lbs. (13kg) Manila Rope Snatch 6 Inch Wire Rope Blocks Snatch Block 6" and 8" Manila Rope Snatch This 6" (152mm) snatch block Block with Latch Hook. These comes with a forged swivel latch 6" (152mm) and 8" (203mm) hook and drop link. snatch blocks come with a The block is used exclusively forged swivel latch hook and with wire rope up to 1/2" drop link. (12mm) diameter. New style blocks feature A semi-circular guard in the higher working load limits. shell over the sheave prevents Bronze bushed sheaves wire rope from slipping with larger bearing diameter between shell and sheave. for extended block life. The working load limit is 4000 The blocks can be used with lbs. (1815kg). either manila or synthetic Sheave has heavy duty rope in sizes ranging from bronze bushing. 3/4" to 7/8" diameter for the P/N 25798 Weight: 17 lbs. (8 kg) 6" while the 8" ranges from 1 to 1-1/8". The working load limit is 2 tons for the 6" (1814.4 kg) and 4 tons (3628.8 kg) for the 8" P/N 30415 6" Snatch Block Weight: 7.5 lbs. (3.4 kg) P/N 30411 8" Snatch Block Weight: 13 lbs. (6 kg) B Ladder Platform Is used to provide a sturdy work platform for the craft person performing work from a ladder. Consists of a 7 ply 3/4" marine plywood seat hinged to a welded pipe frame. The rear edge of the seat and the bottom cross member of the frame are equipped with spring actuated latches to automatically lock the platform to the ladder rung. The upper surface of the seat has a non- skid finish which provides protection against slipping while working or changing position May be used on all aluminum or fiberglass ladders with either round or "D" aluminum rungs. The rung diameters may range from 1 1/4 to 1 5/8" (31-41mm) inclusive The Model B Ladder Platform is rated for a maximum load of 375 lbs. (170kg) Dimensions: Platform: 9 1/2" (241mm) x 18" (457mm) x 3/4" (11mm) Folded: 15 1/2" (394mm) x 18" (457mm) x 3" (76mm) P/N 15326 Weight: 11 lbs. (5 kg) 22

Guy Wire Dispenser Take only the guy wire you need for the job. This essential aid for handling guy wire coils is robustly constructed with plated steel tubing. Two tools in one. Use it in the yard to coil what you need from the main reel, tie it off and remove it for the job. You can also take the dispenser with you and remove what you require at the job site. Heavy duty bearings allow the reel to spin freely to fill or dispense the reel. Two removable side arms for ease of loading or unloading. Automatically feeds wire as drawn off by operator. Inside reel is 36" X 6" making it easy to hold over 250 (76m) of 1/2" (12.7mm) wire. P/N 87287 Weight: 33 lbs. (15kg) AERIAL TOOLS C Pull Finder With Case Is used to determine the pull in feet on corner poles and bisects the corner angle to locate the guy wire or angle Is a sturdy nickel plated brass unit which consists of a screw type prod which supports two pivoted sighting arms, a pointer on one arm which indicates the pull on scale inscribed on the other arm Built into the tool is a guy rod and strand gauge with three separate graduations Is furnished with a rugged cowhide leather case for further protection For use, the craftsperson simply screws the prod of the C pull Finder into the corner pole and sights along the two adjustable arms to the adjacent poles. The C pull Finder indicates the amount of pull on the corner pole and permits easy bisecting of the corner angle for location of the guy wire. P/N 84850 Weight: 1 lbs. (455g) B Lifting Shackle Allows attachment of a chain hoist to lashed aerial cable for lifting. A flat steel shackle fits between strand and cable Captive locking pin clevis to attach chain hoist hook Can handle loads up to 3000 lbs. (1361kg) P/N 07560 Weight: 9 oz. (.25kg) B Self Locking Aerial Handline (With Chain) This product is intended primarily for one person use and is equipped with a locking mechanism which permits clamping the rope temporarily to hold the load at any desired height to free the hands of the worker The rope is clamped by pulling the fall line away form the load line and is released by a straight pull on the fall line Is fitted with 60 of 3/8" (18m x 9mm) manila rope equipped with a ring in one end and ring and hook in the other end Is restricted to raising and lowering loads not exceeding 100 lbs. (45kg) On P/N 08192, a chain is supplied to prevent scorching of the rope by hot solder and paraffin pots. P/N 08192 Weight: 5.8 lbs. (2.63kg) B Self Locking Aerial Handline (without chain) P/N 81921 Weight: 5.4 lbs. (2.45kg) 23

AERIAL TOOLS Strand Tensionmeter Commonly referred to as a Strand Dynamometer, the Strand Tensionmeter is used in tensioning new strand and in measuring the tension in existing strand. Assures that utilities maintain proper cable clearances to comply with all requirements specified in the National Electric Safety Code s Uniform System of Clearances. Is a precision instrument which can quickly measure tensions of 1/4" (6.6M) Extra High Strength, 5/16" (6M), 3/8" 10M) and 7/16" (16M) Utilities Grade, zinc coated guy wires and messenger cables per ASTM A-475 No battery to run down and let you down-100% mechanical. One piece construction measures all sizes. No saddles to loose. Used on strands having less than 10,000 lbs. of tension. The Tension meter measures tension in pounds force with an average accuracy of plus or minus 3%. The maximum error magnitude can be the greater of 7% or 150 pounds force with a 3% frequency. This plated steel instrument measures the force required to deflect the strand to an out of line position, registering this force on an integral dial. Is furnished with an analog thermometer, temperature compensation charts, detailed instructions and a hard shell plastic carrying case cushioned with foam rubber for protection. A registered serial number is stamped on each handle. Strand tension readings may be taken at any convenient point in the span. The actual strand tension is easily determined by referring to the furnished calibration chart. The user converts the dial indicator reading into the tension value. The data on the chart indicates the dial reading of the tensionmeter corresponding to the amount of strand tension, in 100 pound increments, for the normal tension range of each strand size. To ensure accurate measurements of different ambient temperature conditions, take a temperature reading with your thermometer and refer to the temperature compensation charts. Note: Contact GMP for any maintenance service and repairs of GMP or any older AT&T model B Strand Dynamometers. P/N Description Strand Calibrations Weight 70046 Strand Tensionmeter w/bell Calibrations 1/4" EHS Grade 5/16" Utilities Grade 3/8" Utilities Grade 7/16" Utilities Grade 1 11 lbs.(5kg) 70446 Strand Tensionmeter w/bell & GTE Calibrations 1/4" EHS Grade 5/16" EHS Grade 3/8" EHS Grade 7/16" EHS Grade 5/16" Utilities Grade 3/8" Utilities Grade 7/16" Utilities Grade 11 lbs. (5kg) 24

Typical ADSS Installation In Line Block Split side frame and hooks make it easy to use. The side frame incorporates a guide ring to protect the fiber cable. The sheave rides on ball bearings. O.D.: 8.44" Groove Width: 2.36" Root Dia.: 6.0" Wt.: 9.5 lbs. W.L.L.: 660 lbs. P/N 70616 Rope Storage Reel with 5/16 x 2000 of Rope Unique reel design that allows it to be used on both the payout stand and the Cable Pony. Holds up to 2,000 of 5/16" dia. pulling line. P/N 70624 Starting Block The block has a safety gate and steel side frames. The sheave rides on ball bearings. O.D.: 11.8" Groove Width: 1.77" Root Dia.: 9.64" Wt.: 15.4 lbs. W.L.L.: 2646 lbs. P/N 70595 O.D.: 18.50" Groove Width: 2.17" Root Dia.:15.16" Wt.: 30.8 lbs. W.L.L: 5291 lbs. P/N 70621 Starting Block The large diameter profiled groove helps protect the cable. The swivel oval eye, cable gate and cable retaining pin make it easy to use. The sheave rides on ball bearings. O.D.: 26.06" Groove Width: 2.36" Root Dia.: 23.62" Wt.: 33.1 lbs. W.L.L: 5291 lbs. P/N 70614 Rope Pay Out Stand Supports the rope storage reels during the stringing process. P/N 70619 ADSS CABLE PLACING ADSS is an acronym of All-dielectric Self-supporting Optical Cable. ADSS cable is designed for aerial self supporting application at short, medium and long span distances. Cable Pony The GMP Cable Pony winch offers the constant pulling tension of a double capstan drive and the flexibility of a direct drive drum in one machine. The winch employs a powerful Honda GTX engine mounted with associated hydraulics on a sturdy trailer unit. The precise hydraulic controls allow easy operation through one fail-safe lever. Ideally suited for ADSS, aerial stringing work, conductor recovery or underground cable handling. Used for overhead ADSS and underground cable pulling applications providing a constant, maximum pulling tension Pulling rope is stored on a de-mountable drum reel A manually adjusting layering arm allows the operator to spread the pulling rope across the entire width of the storage reel 2200 lbs. (1000kg) Maximum Pulling Capacity 130 /min (40m/min) Maximum Rope Speed P/N 70613 Weight: 1400 lbs. (635kg) 25

MANHOLE TOOLS Manhole Cover Lifters Aid In The Removal And Replacement Of Manhole Covers And Reduces Strain Put On The User. Manhole Cover Hook A simple tool that s been used for years to pry loose conventional manhole covers. Made from octagon tool steel that s been specially hardened to prevent bending 26" (66cm) long NOTE: For actual removal of a cover please use one of our Manhole Cover Lifters. P/N 08172 Weight: 4 lbs. (2kg) Manhole Cover Lifter This ingenious tool simplifies the removal and replacement of typical telephone manhole covers while decreasing the strain on the user. The long handle provides useful leverage when removing and replacing manhole covers Each tool is made of an all-steel handle, sleeve, shank, foot and heat-treated alloy steel hook. Zinc plating is then applied to fight rust and rubber grips are placed on both handle and foot to prevent slippage. The open end of the hook can be locked inside the handle as an added safety feature when not being used. P/N 01368 Manhole Cover Lifter 9 lbs. (4kg) P/N 13681 Manhole Cover Lifter w/spiked Foot 9.5 lbs. (4.3kg) Spiked Foot Option "E-Z Lift" Cover Lifter The E-Z Lift cover lifter is the tool of choice by major utilities for removing and replacing manhole and pullbox lids. Manufactured from solid 6061-T6 lightweight aluminum The built in mechanical advantage allows you to remove even the most stubborn cover, while letting the lifter do the work, not your back Has a link device that attaches to an S" Hook which allows you to position the tool so the handle is vertical when lifting Has a urethane covered T-bar for extra traction on asphalt Optional spiked foot is available for improved traction on grass, sand, ice, snow or other loose surface P/N 70159 E-Z Lift" Manhole Cover Lifter 9 lbs. (4kg) P/N 70158 E-Z Lift" Manhole Cover Lifter w/spiked Foot 9.5 lbs. (4.3kg) Spiked Foot Option Manhole Guard Rail This high-quality guard helps protect field crews when working in and around manhole vaults. Each guard folds into a compact 2 1/2" (64mm) x 33 1/4" (844mm) rectangle, yet opens easily into a large 32" (813mm) wide by 32" (813mm) deep x 42" (1070mm) high cube P/N 06867 Weight: 40 lbs. (18kg) Aluminum Manhole Shield This 12" high shield is made of lightweight aluminum and has a pneumatic seal that keeps ground water from flowing into the open manhole. Just inflate the tube with 5-10 lbs. of air or nitrogen to form a water-tight seal. No clamps or sealing compounds required. The manhole shield (reversible 27 & 30 ) fits most communications manhole openings. P/N 72730 Weight: 20 lbs. (9kg) Adjustable Manhole Shield One tool will give you additional safety when working in round manhole openings ranging from 24" (610mm) to 38" (970mm) in diameter. Its cast aluminum clamps let it adjust and stay to fit all sized manholes within its range P/N 07350 Weight: 19 lbs. (8.6kg) 26

Utility Manhole Cover Lifter This lifter is for the individual faced with a wide variety of covers in their work environment. The plated steel tubular body has been made thicker for the typically heavier electric utility manhole covers The built in mechanical advantage allows you to remove even the most stubborn cover, while letting the lifter do the work, not your back A spiked foot is incorporated into the design for improved traction on grass, sand, ice, snow or other loose surface GMP offers multiple hooks or keys" to be placed on the shackle at the end of the lifter s galvanized chain. This allows one tool to remove multiple cover types The keys are heat treated steel for extra strength and durability MANHOLE TOOLS P/N Weight Lifter Small Medium Large 70066 J-Hook L-Hook J-Hook 70151 9 lbs. (4kg) X X X 70152 8.5 lbs. (3.8kg) X X 70153 8.5 lbs. (3.8kg) X X 70154 8.5 lbs. (3.8kg) X 70155 9 lbs. (4kg) X X X X 70156 9 lbs. (4kg) X X X 70157 9.5 lbs. (4.3kg) X X X X Small J-Hook Med L-Hook Large J-Hook Manhole Cover Bolts And Wrenches Pentagonal head bolts are machined from a tough grade of stainless steel designed for durability when fastening a manhole cover in place. GMP offers the bolts in two sizes: 3 1/4" overall length threaded 5/8" - 11 with countersink chamfer under head P/N 84530 1 7/16" overall length threaded 1/2" - 13 with flat shoulder under head P/N 84531 Manhole Cover Wrench Specifically designed for use on manhole cover bolts, this wrench has a pentagonal socket at one end which fits over the head of our manhole cover bolts, and a 3/4" (19mm) hole at the other for use with a rod or hook-end spinning wrench. It s made of heat-treated steel with a zinc-plated finish. P/N 84540 Manhole Cover Socket Wrench For those who want to use a powered driver we offer this pentagonal socket wrench that fits any impact tool with a 7/16" hex drive. P/N 01375 Penta Buster The PENTA BUSTER tool is a patented, multi-purpose solution to the nagging industry problem of cleaning debris from the area surrounding the fasteners used in external ground-level service boxes. It grinds away the debris around service box enclosures with a ratchet that produces teeth" that disappear at the flip of the wrist. Made with corrosion resistant 303 stainless steel. The removable T-handle allows the base to be used with a standard 1/2" drive ratchet. P/N 33940 3/4" Pentagonal PENTA BUSTER 804-5 (use with GMP bolts) P/N 33941 9/16" Hex PENTA BUSTER 804-7 P/N 33938 3/8 to 1/2" ratchet adapter 33940 33941 27

MANHOLE TOOLS Gas Engine Ventilation Blower These high quality blowers offer the versatility of either supplying continuous fresh air or providing ventilation to manholes and other confined areas. This unit offers the versatility of providing either fresh air supply or exhaust ventilation without relying on an electric power source Construction, utility and telephone crews can depend on its power and performance for removal of toxic and noxious gases and continuous fresh air The unit is equipped with a 4 cycle, 3 horsepower Briggs & Stratton gasoline engine. Air flow is measured at 1350 CFM at the nozzle; 1050 CFM with one 90 bend or 775 CFM with two 90 bends The frame and housing are constructed from heavy gauge sheet metal providing exceptional durability and resistance to damage The heavy duty blower wheel is dynamically balanced and braze welded for durability Vibration mounts absorb shock and provide exceptional in use stability P/N 70132 Weight: 53 lbs. (24kg) Dimensions: 18" (457mm) High X 16" (406mm) Wide X 20" (508mm) Deep Self Storing HD Hose Self contained one-piece duct and bag combination. Durable, compact built-in carrying case with handle is actually one end of the hose and connects to the ventilation blower. Single-ply, vinyl coated yellow polyurethane hose. 8" x 15 ft. (203mm x 4.57m) Temperature range: -40 to +225 F. (-40 to +107 C) P/N 70347 Weight: 6 lbs. (3kg) AC Electric Ventilation Blower These high quality blowers offer the versatility of either supplying continuous fresh air or providing ventilation to manholes and other confined areas. Especially designed for maximized air ventilation in non explosive and nonflammable confined space work environments by supplying continuous fresh air while removing toxic and noxious fumes from the area It reliably serves the needs of construction crews as well as workers in utility trenches, vaults or tanks Power comes from a 120 volt AC, 1/3 horsepower electric motor. Air flow is measured at 1250 CFM at the nozzle; 805 CFM with two 90 bends. The unit is equipped with a replaceable fuse system which protects components from damage P/N 70133 Weight: 49 lbs. (22kg) Dimensions: 18" (457mm) High X 16" (406mm) Wide X 18" (457mm) Deep Heavy Duty Blower Hose 8" x 15 ft. (203mm x 457cm) heavy-duty heat resistant hose Hose is equipped with a cuff and straps at one end providing a positive hookup to blower, eliminating the possibility of it slipping off during operation. This ensures safe, breathable air in underground work sites When open, the highly visible, UV-resistant yellow hose fully expands for unobstructed air flow The optional hose storage carrier (P/N 87144) is made of steel and coated with a weather-resistant, safety yellow powder coat finish. When closed, the single unit container stores and protects the hose, keeping your storage area less obstructed, and saves you money by extending hose life. P/N 87143 Weight: 9 lbs. (4kg) 28

Submersible Pumps Our pumps are ideal for dewatering construction sites or for all-around use in industrial plants and utilities. They have a Slim-line design, enabling the operator to easily fit them into casings as small as 8" (203mm) in diameter. Top discharge also provides maximum motor cooling for continuous duty applications. Submersible Pump.5 HP Submersible Pump 1 HP Part Number 87253 87252 Rated Output 0.5 Hp (373 W) 1 Hp (746 W) Volts/Phase 115V, 1 phase 115V, 1 phase Rated Amps 6 amps 14 amps Cable 50 (15m) 50 (15m) GPM (lpm) 66 GPM (250lpm) 89 GPM (337lpm) Max. Head 35 (10.66m) 49 (14.9m) Rotation Speed 3450 rpm 3450 rpm Weight 33 lb (15kg) 60 lb (27kg) Height 15" (381mm) 19.5" (495mm) Width 7.1" (180mm) 7.3" (185mm) Discharge connection 2" 2" Pump Material: Outer casing 304 Stainless steel same Stator housing 304 Stainless steel same Shaft 304 Stainless steel same Impeller Cast Iron same Pump Volute Cast Iron same Built-in controls: Thermal overload protectors. Motor: Class F. Built-in high-temperature switch protects the motor form overheating and shorting if the pump runs dry. Mechanical face seals: 3 seals: Lip seal, (2) mechanical seals; silicon carbide and carbon/ceramic. Mechanical Seal-Upper: carbon/ceramic Mechanical Seal-Lower: SiC/SiC MANHOLE TOOLS Discharge Hose 2" x 25' (50mm x 8m) hose for discharging liquid extracted by submersible pumps. 2" diameter female fitting connects to our Submersible Pump models 87253 and 87252. Discharge Hose w/male and female fittings P/N 87250 Weight: 9 lbs. (4kg.) Male fitting at discharge end accepts extra lengths of hose as needed P/N 87250 P/N 87251 Discharge Hose w/1 fitting and open end P/N 87251 Weight: 8.5 lbs. (4kg.) No fitting on opposite end 29

UNDERGROUND TOOLS Stiff Spine Conduit Cleaners These excellent heavy duty tools help clean stubborn foreign matter from a partially obstructed conduit before placing cable. Bristles are looped through a mounting plate providing extreme durability and resistance to loss Hundreds of cutting edges line each side of the cleaner, so that you ll get complete cleaning action throughout the conduit cleaner in either direction The cleaner s bristles are made from an oil tempered spring steel Available in a range of sizes for your different cleaning operations P/N Conduit ID Body Length Work Load Limit P/N Conduit ID Body Length Work Load Limit 10152 2" (50mm) 4" (102mm) 1250 lbs. (567kg) 10156 4" (101mm) 5.25" (134mm) 1250 lbs. (567kg) 10153 2.5" (63mm) 4" (102mm) 1250 lbs. (567kg) 10157 5" (127mm) 5.25" (134mm) 1250 lbs. (567kg) 10154 3" (76mm) 5.25" (134mm) 1250 lbs.(567kg) 10158 6" (152mm) 5.25" (134mm) 1250 lbs. (567kg) 10155 3.5" (89mm) 5.25" (134mm) 1250 lbs. (567kg) Rubber Duct Swabs Rubber Duct Swabs are pulled through your duct system after conduit is installed to verify duct integrity, to clean dirt and residue from installation, to provide a clean raceway for ease of cable placement. Assists in the spreading of lubricant throughout the duct. Flexible cable is suitable for tight bends. Long Duct Swabs P/N Conduit ID Weight 10116 2" (51mm) 2.5 lbs. (1.11kg) 10117 3" (76mm) 4.1lbs. (1.84kg) 10118 3 1/2" (89mm) 5.8 lbs. (2.27kg) 10119 4" (101mm) 6.8 lbs. (3.11kg) 10120 5" (127mm) 9.4 lbs. (4.26kg) 10121 6" (178mm) 13 lbs. (5.90kg) 10122 8" (202mm) 22 lbs. (9.98kg) Short Duct Swabs P/N Conduit ID Weight 10123 2" (51mm) 1.25 lbs. (.57kg) 10124 2 1/2" (64mm) 1.45lbs. (.66kg) 10125 3" (76mm) 1.75 lbs. (.79kg) 10126 3 1/2" (89mm) 2.24 lbs. (1.02kg) 10127 4" (101mm) 2.71 lbs. (1.23kg) 10128 5" (127mm) 3.53 lbs. (1.60kg) 10129 6" (178mm) 4.62 lbs. (2.09kg) 10130 8" (202mm) 7.93 lbs. (3.60kg) Long Duct Swabs Short Duct Swabs Aluminum Test Mandrels Test Mandrels are pulled through your duct system after conduit is installed to verify duct integrity and to comply with the ovality (roundness) specification the owner may have. Mandrel made from solid aluminum for durability and corrosion resistance. Flexible cable is suitable for tight bends. P/N Conduit ID Weight 10108 1 1/2" (38mm) 1 lb. (.45kg) 10109 2" (51mm) 1 lb. (.45kg) 10110 2 1/2" (64mm) 1 1/2 lbs. (.68kg) 10111 3" (76mm) 2 1/2 lbs. (1.13kg) 10112 3 1/2" (89mm) 3 1/2 lbs. (1.59kg) 10113 4" (101mm) 6 1/2 lbs. (2.95kg) 10114 5" (127mm) 10 1/2 lbs. (4.77kg) 10115 6" (178mm) 15 lbs. (6.80kg) P/N A B C 10108 1.12" (28.5mm) 1.74" (44.2mm) 13.5" (342.9mm) 10109 1.62" (41mm) 2.4" (61mm) 13.5" (342.9mm) 10110 2" (50.8mm) 2.98" (75.7mm) 13.5" (342.9mm) 10111 2.38" (60.4mm) 3.5" (89mm) 13.5" (342.9mm) 10112 2.75" (69.8mm) 4.1" (104mm) 20" (508mm) 10113 3.25" (82.5mm) 4.84" (122.9mm) 20" (508mm) 10114 4" (101.6mm) 5.98" (151.9mm) 20" (508mm) 10115 4.75" (120.6mm) 7.08" (179.8mm) 20" (508mm) 30

Cable Bending Tool This highly versatile cable bender will let you easily bend up to 3 1/2 in. (89mm) dia. cable into almost any shape The best cable bender to have whether you re setting up cables in manholes, making bends, straightening cable for sleeve placement during splicing, doing setups, off-sets or straightening in buildings, or even working from an aerial bucket. The tool is made from zinc plated steel with silicone bronze saddles. Seven position handle lets you bend cable easily, even when working in close quarters. P/N 17022 Weight: 15 lbs. (6.8kg) Flexible Steel Mandrels These mandrels are perfect for use in conduit with extreme bends Available for conduit sizes ranging from 2 in. (50 mm) to 5 in. (127 mm) The disks are made from hardened steel which are graduated in size and bend independently along the flexible cable body Largest washer is.25 in. smaller than its rated size P/N Conduit ID Weight Work Load Limit (WLL) 10102 2 in. (50 mm) 8 lbs. (3.63kg) 2250 lbs. (1020kg) 10106 2.5 in. (63 mm) 12 lbs. (5.5kg) 2250 lbs. (1020kg) 10103 3 in. (76 mm) 15 lbs. 6.80kg) 4800 lbs. (2177kg) 10107 3.5 in. (89 mm) 16 lbs. (7.3kg) 4800 lbs. (2177kg) 10104 4 in. (101 mm) 17 lbs. 7.71kg) 4800 lbs. (2177kg) 10105 5 in. (127 mm) 27 lbs.(12.2kg) 4800 lbs. (2177kg) UNDERGROUND TOOLS Jamb Skid Used to support quadrant blocks and sheaves when pulling cable through underground conduit. Lightweight, constructed primarily of Aluminum Corrosion resistant Top swivels for easier placement within vault. Includes (2) 1 5/16" (33mm) diameter locking pins (71717) to lock the jamb skid height and secure the sheave or quadrant block Accepts all GMP sheaves and quadrant blocks with widths up to 7" (178mm) Includes a base unit to accept the upper extensions Do not exceed 10,000 lbs. cable tension when using the short or intermediate extension. Do not exceed 5,000 lbs. cable tension when using the long extension. P/N 70640 48" to 85" (121.9 to 215.9cm). Includes 43" (109.2cm) extension. Rated at 10,000 lbs. cable tension. P/N 70643 84" to 121" (213.4 to 307.3cm). Includes 76" (200.7cm) extension. Rated at 10,000 lbs. cable tension. P/N 70646 114" to 151" (289.6 to 383.5cm). Includes 109" (276.9cm) extension. Rated at 5,000 lbs. cable tension. 31

UNDERGROUND TOOLS Cable Sheaves Cable Sheaves are used in placing and removing underground cables. Constructed from high strength aluminum alloy, and have self lubricating bushings for long, maintenance free lives Choose bore sizes for 1 5/16" (33mm) pin or the smaller 1 1/4" pin (31.7mm) for other manufacturers sheaves These units are available in 11" (280mm), 20" (510mm) and 26 1/2" (675mm) dia., and are used with 3" (76mm), 4" (102mm), or 5" (127mm) cables The sheaves sized for a 1 5/16" diameter pin, are normally used with the GMP cable sheave shackle, pulling frame or jamb skid. The pin is supplied with the cable sheave shackle, pulling frame or jamb skid. The sheaves sized for a 1 1/4" diameter pin are designed as direct replacements for other manufacturers sheaves. These sheaves will not work with the GMP cable sheave shackle, pulling frame or jam skid so please order carefully. ORDERING INFORMATION P/N A B C D Weight Sized for 1 5/16" Pin 71723 3" (8cm) 11" (28cm) 8 1/2" (22cm) 3 15/16" (10cm) 15 lbs. (7kg) 71726 4" (10cm) 11" (28cm) 7 7/8" (20cm) 4 15/16" (12.5cm) 20 lbs. (9kg) 71729 5" (13cm) 11" (28cm) 6 7/8" (17cm) 5 15/16" (15cm) 25 lbs. (11kg) 71722 3" (8cm) 20" (51cm) 17 1/2" (44cm) 3 15/16" (10cm) 32 lbs. (15kg) 71725 4" (10cm) 20" (51cm) 16" (41cm) 4 15/16" 12.5cm) 36 lbs. (16kg) 71728 5" (13cm) 20" (51cm) 16 1/2" (42cm) 5 15/16" (15cm) 40 lbs. (18kg) 71721 3" (8cm) 26 1/2" (67cm) 24" (61cm) 3 15/16" (10cm) 38 lbs. (17kg) 71724 4" (10cm) 26 1/2" (67cm) 22-1/2" (57cm) 4 15/16" (12.5cm) 44 lbs. (19kg) 71727 5" (13cm) 26 1/2" (67cm) 23" (58cm) 5 15/16" (15cm) 56 lbs. (25kg) Sized for 1 1/4" Pin 71731 3" (8cm) 11" (28cm) 8 1/2" (22cm) 5 5/16" (15cm) 15 lbs. (7kg) 71732 4" (10cm) 11" (28cm) 7 7/8" (20cm) 4 15/16" (12.5cm) 20 lbs. (9kg) 71733 5" (13cm) 11" (28cm) 6 7/8" (17cm) 5 15/16" (15cm) 25 lbs. (11kg) 71734 3" (8cm) 20" (51cm) 17 1/2" (44cm) 3 15/16" (10cm) 32 lbs. (15kg) 71735 4" (10cm) 20" (51cm) 16" (41cm) 4 15/16" (12.5cm) 36 lbs. (16kg) 71736 5" (13cm) 20" (51cm) 16 1/2" (42cm) 5 15/16" (15cm) 40 lbs. (18kg) 71737 3" (8cm) 26 1/2" (67cm) 24" (61cm) 3 15/16" (10cm) 38 lbs. (17kg) 71738 4" (10cm) 26 1/2" (67cm) 22 1/2" 57cm) 4 15/16" (12.5cm) 44 lbs. (19kg) 71739 5" (13cm) 26 1/2" (67cm) 23" (58cm) 5 15/16" (15cm) 56 lbs. (25kg) Cable Sheave Shackle Used for supporting a cable sheave or quadrant block in place at a manhole equipped with pulling-in irons. Contains a two part clevis made of high strength structural steel, with two sets of sheave pin holes 1 3/8" (35mm) dia. for accommodating either a cable sheave or quadrant block The load half has a forged steel hook that attaches to the pulilng in irons with a standard 1/2" (12mm) x 6 ft (1.8m) construction chain, while the support half has a shoulder eyebolt so you can tie it off to a support rope over the manhole Will accommodate any 11", 20" or 26 1/2" cable sheave with a 1 3/8" hole size for 3", 4" or 5" cable Each shackle includes a 1 5/16" dia. sheave pin and can withstand working loads up to 10,000 lbs. (4535kg) P/N 71643 3" (76mm) 32 lbs. (14kg) P/N 71644 4" (102mm) 45 lbs. (20kg) P/N 71645 5" (127mm) 47 lbs. (21kg) Quadrant Blocks Used to guide the pulling line or cable during underground cable placement or removal Consists of six cast aluminum sheaves supported in an aluminum frame to provide a bending radius of 24" (609mm) Each sheave has self lubricating bushings for smooth movement and a long, maintenance free life Available to accommodate 3" (84453), 4" (84454) or 5" (84455) cable diameters Each side plate has holes to insert a 1 1/4" (32mm) digging bar to prevent the block from being knocked into the manhole Can also be used with a Cable Sheave Shackle, Pulling Frame or Jamb Skid to suspend in the manhole as an alternative method of use. P/N 84453 3" (76mm) 60 lbs. (27kg) P/N 84454 4" (102mm) 75 lbs. 34kg) P/N 84455 5" (127mm) 90 lbs. 40kg) 32

Construction Chains These chains are intended for use in general construction work P/N 63540 P/N 63541 Offered in two link sizes: 5/16" (8mm) and 1/2" (13mm) The 5/16 in. (8mm) link size (63541) is furnished in a length of 4 ft. 4" (132cm) and is equipped with an end ring at each end. WLL1700 lbs. (771kg) The 1/2" (13mm) link size (63540) is furnished in a length of 6 ft. (183cm) and is equipped with a grab hook at one end and an end ring on the other end. WLL 4500 lbs. (2041kg) P/N 63540 Weight: 17.5 lbs. (8kg) P/N 63541 Weight: 5.5 lbs. (3kg) Digging Bars The GMP Digging Bars are available in two styles: San Angelo (SA) and Bell System. SA Style 1" (25mm) Hex 26301 6' (1.8m) Weight: 17 lbs. (8kg) 26302 5' (1.5m) Weight: 14.5 lbs. (7kg) Bell Style 1.25" (29mm) Hex 26303 8' (2.4m) Weight: 28 lbs. (13kg) 26304 6' (1.8m) Weight: 21 lbs. (10kg) UNDERGROUND TOOLS 5/8" Underground Handline This handline is intended for lowering tools and materials and for setting up cables when doing underground work. Our 5/8" x 20 (16mm x 6m) handline comes equipped with a 1" (25mm) open hook spliced in one end and a 6"(152mm) eye splice at the other end P/N 68592 Weight: 3 lbs. (1.5kg) 1/2" Utility Handline This handline is intended for general construction use. The 1/2" X 60 (13mm x 18m) handline comes equipped with a crown splice on one end (no hardware) and a 6" (152mm) eye splice on the other end and waxed linen cord served at both ends for approximately 1/2" (13mm) P/N 68596 Weight: 3 lbs. (1.5kg) 3/8" Utility Handlines Available in lengths of either 50 (15m) or 100 (30m), this handline is used to rais service drop wires to pole mounted aerial distribution cable plant. Similar in construction to the 1/2" Utility Handline, the 3/8" (10mm) Utility Handlines are provided with a crown splice on one end (no hardware) and a 6" (152mm) eye splice on the other end. Also both ends are served with approximately 1/2" (13mm) of waxed linen cord. P/N 68593 50 (15m) Weight: 3 lbs. (1.5kg) P/N 68595 100 (30m) Weight: 4 lbs. (2kg) Mud Bucket The fastest way to clear a manhole vault of mud and silt that can t be cleared by a pump. The bucket is made from sturdy aluminum and has two handles attached to a bailing scoop at four pivot points The components are MIG welded, and each point has mechanical steel bushings for top durability The bucket s scoop can hold up to 5 quarts (4.7 liters) of material in a single catch and has an overall length of 9 (274cm) P/N 70210 Weight: 8 lbs. 4 oz. (3.7kg) 33

UNDERGROUND TOOLS Cable Feeding Sheaves Cable Feeding Sheaves slide into the end of conduit in a manhole wall, allowing the cable being fed into the conduit to roll smoothly over the sheave from all angles The frame is made from steel for durability while the sheave is made from aluminum alloy or Nylatron with self-lubricating bearings. The sheaves have a split tube for easy removal after cable is installed Note: Cable feeding sheaves are not designed for use with fiber optic cable due to bending radius limitations. Please contact our Sales team for specific product recommendations. Aluminum Alloy Roller Cable Feeding Sheaves P/N Description Weight 70563 for 2" duct Schedule 40 14 lbs. (6.4kg) 70564 for 3" duct Schedule 40 17 lbs. (7.7kg) 70565 for 4" duct Schedule 40 23 lbs. (10.4kg) 70566 for 4" duct Schedule 80 23 lbs. (10.4kg) 70567 for 5" duct Schedule 40 27 lbs. (12.2kg) Nylatron Roller Cable Feeding Sheaves P/N Description Weight 70581 for 3" duct Schedule 40 11.4 lbs. (5.16kg) 70582 for 4" duct Schedule 40 17.4 lbs. (7.89kg) 70583 for 4" duct Schedule 80 17.4 lbs. (7.89kg) 70584 for 5" duct Schedule 40 20.0 lbs. (9.09kg) 70585 for 6" duct Schedule 40 38.9 lbs. (17.6kg) 70586 for 6" duct Schedule 80 40.4 lbs. (18.3kg) Manhole Sheave The Manhole Sheave or Pittsburgh" is used to guide pulling line or cable over the manhole edge when placing and removing cable in manholes which are equipped with pulling in irons to support a sheave and shackle assembly. Consists of a reinforced, heat-treated wrought aluminum alloy frame with two selflubricating, bronze bushed aluminum sheaves The frame also has a hole in each side plate so you can insert a 1 1/4" (32mm) dia. digging bar parallel to the ground to keep the sheave from being knocked into the manhole Approximate overall unit dimensions: 30" (762mm) L x 12" (305mm) W x 22" (559mm)H Sheaves are available to accommodate cable up to 3" (76mm), 4" (100mm) or 5" (130mm) diameters Standard units are rated at 7,500 lbs. (3.3kN) The 80975 heavy duty 5" model is rated for 10,000 lbs. (4.4kN) Ordering Information: P/N Max. Cable Diameter Weight 70283 3" (76mm) 32 lbs. (14kg) 70284 4" (100mm) 55 lbs. (24kg) 70285 5" (130mm) 65 lbs. (29kg) 80975 5" (130mm) (Heavy Duty) 65 lbs. (29kg) Rope Guide Roller Used to guide pulling lines in and out of manholes, handholes and junction boxes to avoid damage to the rope. Consists of an aluminium roller mounted on a zinc plated steel frame Has a working load limit of 3,300 lbs. (1497kg) Dimensions: 10.25" x 5.9" x 6.25" P/N 88801 Weight: 4.7 lbs. (2.13kg) Cable Bending Shoe These easy-to-install bending shoes protect cables from sharp edges in and around manholes and conduit systems. Made of 13 gauge (.093"/2.3mm) steel with a protective zinc and polymer coating. Each shoe has a tie off hole at either end for increasing stability The trough-like steel section is bent into a 75 arc with an extended end for easier insertion into duct. Two sizes available; 3 in. (76mm) and 3.50 in. (89mm) P/N 86570 3 in. (76 mm) 2 lbs. 4 oz. (1.02kg) P/N 86571 3.50 in. (89 mm) 2 lbs. 8 oz.(1.13kg) 34

Cable Feeders These solid feeders provide increased cable protection no matter how deep the manhole is and an easy way to apply lubricant to the cable as it passes through the feeder. Our standard Main sections are 4" (101cm) x 90" (228 cm) and Extension Sections are 4" (101cm) x 43 1/4" (109cm). Larger diameters and special lengths are available. Please refer to the table listed below. The feeders are made from flexible spring steel hose Both the Main Section and Extension Section come with a bronze bell mouth welded to one end The Main Section also has a connecting sleeve welded to the other end, while the Extension Section has a reducer welded to its other end to fit into the bell mouth of either the main Section or another Extension Section The ability to add Extension Sections allows a user to make any length of hose required UNDERGROUND TOOLS Extension Feeder P/N Description Weight 60581 4" x 43.5" 18 lbs. (8kg) 60582 4" * 60600 5" * 60586 6" * * Customer Specified Length Main Feeder P/N Description Weight 60580 4" x 90" 35 lbs. (15kg) 60583 4" * 60585 5" * 60587 6" * * Customer Specified Length Split Cable Feeders These feeders give you the same tough construction as our standard feeders with the added benefit of dividing in half for fast, easy removal without needing an end of the cable. All exposed edges of both the 90" (228cm) Main split Feeder and 36" (91cm)Extension Split Feeder have a protective plastic coating protecting the cable and user The series of latches allows for easy opening and closing of both the body and ends of the feeders P/N 88830 4" x 90" Split Main Cable Feeder Weight: 38 lbs. (17kg) P/N 88831 4" x 36" Split Ext Cable Feeder Weight: 23 lbs. (10kg) Cable Feeder Nozzles These simple split nozzles provide easy connections between our cable feeders and the conduit being entered Each nozzle is made from high strength, thin wall steel for a wider ID that permits use of larger pulling eyes Nozzles are available for either round or square conduit while still being compatible with our round cable feeders The nozzles are split for easier removal after the cable has been placed and both halves are marked with the nozzle size The nozzles are available for straight connections ( a 4" cable feeder going into a 4" conduit) or for reduced connections (a 4" cable feeder going into a 3" conduit) P/N Feeder Size Conduit Size Conduit Shape 60584 4" 3.50" Square 60590 4" 3" Round 60591 4" 3.25" Round 60592 4" 3.25" Square 60593 4" 3.50" Round 60596 4" 4" Round 60597 4" 4" Square 60599 5" 5" Round 60598 6" 6" Round P/N Feeder Size Conduit Size Conduit Shape 70001 6" 5" Round 70002 6" 4" Round 70003 6" 3.50" Round 70004 6" 3.25" Round 70005 6" 3" Round 70006 5" 4" Round 70007 5" 3.50" Round 70008 5" 3.25 Round 70009 5" 3" Round 35

REELS CR Collapsible Power Reel For 2 7/16" Bayonet The CR Collapsible Power Reel is used for rapidly stringing or taking up wire or small diameter cable. Ideal for placing or removing aerial cable, taking down wire, or pulling winch line into conduits. Can be used for pulling in poly rope or tape, where the reel will only be used as a pulling capstan and not as a storage device Has a capacity of 1,600 ft of 1/4" (490m of 6mm) wire rope with a maximum allowable pull of 3500 lbs. Bare Drum (1600kg). Can also store a 200 pound coil of wire. Reel O.D. 28" (expanded), 18 3/4" (collapsed). I.D. 20" P/N 08136 Weight: 70 lbs. (31.75kg) RS Power Reel The RS Power Reel is intended for use in pulling aerial cable with a small size wire rope used as a pulling line. Also may be used for paying out the rope with the spool mounted either on the winch drum shaft or on the pole spindle. Perfect for utility pole work, this easy to use reel consists of a spool, driving and pole spindles, and two brake assemblies, one on each spindle Can be mounted on either a drive or pole spindle and has a 24 3/4" diameter O.D. and a 6" diameter hub Driving spindle mounts on any 2 7/16" (62mm) diameter winch extension shaft with a bayonet or pin type mount, while the pole spindle can support a spool on a pole The maximum allowable pull is rated for 2000 lbs. (907kg) Spool is made of heavy gauge steel with a reinforced exterior facing. Has a durable, bright yellow finish. GMP# Spool Width Rope Diameter Capacity Weight 83660 6" (15cm) 1/4" (6mm) 2000 ft (610m) 126 lbs. (57kg) 83669 12" (30cm) 1/4" (6mm) 4000 ft (1220m) 160 lbs. (73kg) Capstan Drive Gives your mobile hydraulic equipment the capacity to run our line of power reels and capstans. So, even when your vehicle doesn t have a winch, you can still afford the benefits of GMP s highly productive cable placing tools, like our 32 in. Torque Limiting Capstan or our universal C.R. Reel, using this economical device. Our Capstan Drive features a Bell standard 2 7/16 in. (62 mm) bayonet shaft and a highly efficient planetary gear reduction that rotates on roller bearings and is powered by a compact, continuous duty single stage motor. At maximum flow of 15 gpm (57 l/m) and operating pressure of 2250 psi (15 500 kpa), the capstan shaft can achieve 58 rpm and develops 13,000 in. lbs. (1469 N-m) of torque. That translates into the following line speeds and line pulls: Device Line Speed Ft./min. (m/min.) Line PullLbs. (kn) 7 in. Capstan 106 (32.4) 3,250 (14.45) C.R. Reel 304 (92.6) 1,300 (5.78) 25 in. Capstan 380 (115.7) 900* (4.00*) 32 in. Capstan 486 (148.1) 700* (3.11*) * Line pull limited to 600 lbs. (2.76 kn) typical clutch setting A multi-disc wet brake that's spring applied and hydraulically released is rated for the unit's full pulling load. Capstan This general purpose capstan is used for a wide variety of pulling and hoisting applications. Cast from a high strength aluminum alloy for low weight Will fit on any 2 7/16" (62mm) diameter winch extension shaft equipped with a bayonet or pin type mount The working surface is 7 1/4" diameter x 8" (184mm x 200mm) wide. The maximum allowable pull is 4000 lbs. (1814kg). P/N 10727 Weight: 21 lbs. (9.5kg) P/N 70329 Weight: 125 lbs. (57kg) 36

Reel Buck A tough, easily maneuvered and portable frame that's ideal for supporting any reel up to 84" (2134mm) diameter. Two welded, rectangular steel members make up the frame. Designed for one-person. Will accommodate the Corning FlexNap cable reels. The frame is protected with a durable powder coat finish to prevent corrosion. Spindle bar included. P/N Max Width (mm) Max Drum (mm) Load Capacity (kg) Weight (kg) 71669 36" (914) 50" (1270) 1200 lbs. (544) 80 lbs. (36) 71678 54" (1372) 50" (1270) 1200 lbs. (544) 90 lbs. (41) 71679 54" (1372) 84" (2134) 500 lbs. (227) 100 lbs. (45) Heavy Duty Braked Drum Stand The Braked Drum Stand is compact in size. Each side frame is fitted with wheels to allow Braked Drum Stand for easy transportation. Drum lifting is achieved with two hand operated hydraulic jacks. An adjustable band brake provides controlled cable tensioning. Maximum drum weight: 8820 lbs. (4000kg) Maximum drum width: 64.6" (1640mm) Maximum drum diameter: 70.9" (1800mm) Minimum drum diameter: 59.1" (1500mm) P/N 74540 Weight: 460 lbs. (209kg) Reel Lifter This handy device makes your reel lifting, stacking and cable removal from a standing reel a breeze. Can be used on reels weighing up to 4,500 lbs. (2040kg) (PN 70240) Allows one person to do the work of several To use the Reel Lifter, position a reel on its side so that one hole in the reel is facing upward. Place the lifter inside the flange and mechanically raise the lifter by the top ring. A toggle at the bottom of the lifter, now inside the reel, will swivel open" allowing the entire reel to be lifted for stacking or to remove cable. P/N 70220 3000 lbs. (1361kg) Capacity Weight: 6 lbs. (2.7kg) P/N 70240 4500 lbs. (2040kg) Capacity Weight: 9 lbs. (4.1kg) B Cable Reel Jack Two of these heavy-duty jacks can support cable reels weighing up to 12,000 lbs. (5400kg) while you install or remove aerial, underground or in-building cable The jack consists of a steel A-frame, a tee which accepts a 2 1/2" (63mm) diameter spindle bar, a screw assembly and a three-hole adjusting nut with a detachable 36" (91cm) lever bar The tee of the jack accepts a standard cable reel spindle 2 1/2" (63mm) in diameter and has a 3/4" vertical locking pin hole in the center The spindle is 63" (160cm) long with a 3/8" diameter locking pin hole 4" from each end. The spindle must be ordered separately (P/N 74531). The height of the jack, from the base to the center of the spindle, ranges from a minimum of 29" (74cm) to a maximum of 48" (122cm) when fully extended The jacks are sold individually P/N 74530 Each weighs 86 lbs. (39kg) Metric Counter with stand REEL HANDLING Medium Duty Braked Drum Stand These stands have been designed in sections for ease of transportation and are simple to assemble and they incorporate a band brake to provide smooth cable tensioning. Two hydraulic pumps provide drum lifting. Maximum drum weight: 3300 lbs. (1500kg) Maximum drum width: 39.37" (1000mm) Maximum drum diameter: 63" (1600mm) Minimum drum diameter: 39.37" (1000mm) P/N 74550 Weight: 300 lbs. (135kg) Metric Counter with Stand for Duct Rod A portable counter that's used in vertical applications. Indicates up to 999.9 meters. Heavy duty hot dipped galvanized steel stand included. P/N 74084 Weight: 35 lbs. (16 Kg) Metric Counter Head Unit 37

UMBRELLAS Umbrellas Whether working in a bucket, or on the ground, GMP umbrellas provide shelter from the sun. GMP offers a choice of rugged umbrellas, and a complete line of accessories for maximum mounting and angle adjustment flexibility. Choose between our Model D Umbrella (P/N 80920) for standard use, or our Dielectric Umbrella (P/N 70352) which is rated to 40kV per ASTM D-149 to help reduce the potential of electrical shock when working near power conductors. A tough plastic 68" (173cm) diameter umbrella cover is colored safety yellow on top (custom company logos available upon request) A reflective white underside cuts down on the interior heat absorption and is vinyl-coated; nylon rib-end pockets keep the frame from tearing the cover Self-sealing waterproofed, waxed stitching, and improved construction using a nylon sleeve and rib retainers for attaching the frame's six (6) collapsible fiberglass ribs The ribs connect at a ring-type lock that slides along the pole to open and close the umbrella. To lock the ring hen open, just slide it over the set pin in the pole and rotate it. The 43" (109cm) long wooden upper pole has a male ferule so you can attach the 29" (74cm) long wooden lower pole for a full height of 6' (1.83m) Use the Dielectric Umbrella when working near power conductors to help reduce potential sources of electrical shock P/N 71647 Angle Adapter & 1 pc. Pole External P/N 71572 Angle Adapter P/N 71649 Tripod Kit shown with P/N 70098 Model D Umbrella. P/N 28210 Bucket Holder Note: Bucktet holder must be used with P/N 71647 Angle Adpapter & 1 pc. Pole Extension. P/N Description Weight 28210 Holder Bucket for Umbrella 1.75 lbs. (.79kg) Accommodates 1 PC Pole Ext P/N 71647 71572 Adapter, Angle Umbrella 1.75 lbs. (.79kg) 71647 Adapter, Angle with 1 PC Pole Ext 2.5 lbs. (1.13kg) 71649 Kit Tripod w/bag 37 lbs. (16.7kg) 70098 Umbrella D w/o Lower Pole Assembly 6.75 lbs. (3.06kg) 80920 Umbrella D with 72" Wooden Pole 9 lbs. (4.1kg) 70352 Umbrella Dielectric with 72" Fiberglass 7.5 lbs. (3.4kg) Pole Rated to 40 kv per ASTM D-149 80921 Case, Umbrella 1 lb (.453kg) 38

Pole Trailer Light Bar Thanks to GMP s Pole Trailer Light Kits you can transport utility poles with greater visibility while meeting DOT requirements and only adding minimal width to your trailer. The frame is made from an extruded aluminum weldment with a durable bright yellow polyester powder coating. D.O.T. approved lights (bulb or LED depending on model) and reflectors are mounted on the back and both sides. The unit comes with a 40 ft (12.2m) 18 gauge S.O. trailer cord with a heavy-duty 4-way or 6-way trailer lug for plugging into either the trailer or the vehicle pulling the trailer. This gives motorists the added information of turn signals and brake lights; not just blinking lights. Environmental concerns are also reduced as our kits don t use disposable batteries. Positive attachment to the pole is created with an over center chain binder that uses 5 ft (152cm) of chain and hardened steel spikes that bury in the pole when the binder is tightened on the wooden pole only version. Heavy duty strap binder version available for attaching to both wood or non-wooden poles. Sockets for both the 4-way and 6-way plugs can be ordered separately. POLE TRAILER LIGHT BAR P/N Description Weight 70274 46" (117cm) wide w/4-way Plug for wood poles only 26 lbs. (12kg) 70276 46" (117cm) wide w/6-way Plug for wood poles only 26 lbs. (12kg) 70277 24" (61cm) wide w/4-way Plug for wood poles only 14 lbs. (6.5kg) 70278 24" (61cm) wide w/6-way Plug for wood poles only 14 lbs. (6.5kg) 71566 46" (117cm) wide w/7-way RV Plug for wood or non-wood poles 26 lbs. (12kg) 71567 46" (117cm) wide w/4-way Plug for wood or non-wood poles 26 lbs. (12kg) 71569 46" (117cm) wide w/6-way Plug for wood or non-wood poles 26 lbs. (12kg) Chain Binder mount for wooden poles only. Strap mount for wood and non-wooden poles 39

CABLE CUTTERS Ratcheting Telco Cable Cutter These rugged cutters are designed especially for cutting communications cable up to 3 3/8" (85mm) in dia. Because of their 19" (483mm) size, they are extremely popular for cutting cable in tight spots like manholes, ditches or riser closets. They are ideal for cutting soft (annealed) copper conductor cable with maximum capacity including 1800 pair 24 AWG or 2700 pair 26 AWG communications cables The ratchet mechanism features reversible twospeed cutting (fast action/low leverage or normal action/high leverage) for extra power Furnished with a full grain leather scabbard to protect the cutter head P/N 75250 Weight: 3.5 lbs. (1.6kg) 750 & 1000 MCM Ratcheting Cable Cutters This ingenious tool offers big cutter performance without long handles to tackle large cutting jobs in tight spaces such as manholes. Fiberglass handles with 100 KV/ft dielectric strength Overall length is a compact 19" (483mm) P/N 75249 used for cutting copper and aluminum cables up to 750 MCM with a size over the insulation of up to 1.4" (36mm) P/N 75245 used for cutting copper and aluminum cables up to 1000 MCM with a size over the insulation of up to 2.25" (57mm) P/N 75249 Weight: 4 lbs. (1.8kg) P/N 75245 Weight: 4.25 lbs. (1.9kg) Texas Cutter For Telco With its long 36" handles and big 3 3/8" blade opening, these rugged cutters definitely command respect. They re built to make clean cuts through even the thickest 1800 pair 24 AWG or 2700 pair 26 AWG lead or polyethylene-jacketed cable Its maximum cutting capacity is 3 3/8" (85mm) diameter P/N 66250 Weight: 9 lbs. (4kg) 556 ACSR Ratchet Cutter 1.6" This cutter is designed to cut the following: ACSR power cable up to and including 556 kcmil 500 kcmil hard drawn electrical conductors 1.40" (35mm) maximum outside dia. 750 kcmil soft drawn electrical conductors 1.60" (40mm) maximum outside dia. Self-support telecommunications cable 1.74" (44mm) with a maximum support messenger size of.276" (7mm) Overall length 18" (457mm) P/N 75248 Weight: 4.4 lbs. (2kg) 336 ACSR Rachet Cutter The patented two-step ratchet mechanism reduces hand force and requires fewer strokes to cut Cuts up to 336 MCM ACSR, 400 MCM Copper, and 600 MCM Aluminum Quick release lever opens blades easily in every cutting position, to allow removal of the cable before completion of cut Hardened steel cutting blades for lasting strength and sharpness Locking lever keeps handles closed for easy transport; fits in a tool box or bag Selectively-hardened blades and reduced hand force make it easier to cut ACSR 10 1/4" (260mm) long P/N 01817 Weight: 1.5 lbs. (.7kg) 500 & 1000 MCM Shear Type Cable Cutters These shear action cutters have rugged Chrome Vanadium steel blades which offer excellent cutting edge performance with toughness that stands up to heavy use when cutting copper or aluminum cables. Fiberglass handles with 100 KV/ft dielectric strength Blades are precision ground for easy cutting and contoured to act like a hook, forcing the cable into the blades and preventing it from slipping as you cut with minimal cable distortion P/N 75246 used for cutting copper up to 500 MCM and aluminum cables up to 600 MCM with a size over the insulation of up to 1.25" (32mm) P/N 75245 used for cutting copper up to 1000 MCM and aluminum cables up to 1200 MCM with a size over the insulation of up to 1.9" (48mm) P/N 75246 500 MCM 3.5 lbs. (1.5kg) P/N 75247 1000 MCM 9 lbs. (4kg) 40

Solder Melting Pot Manufactured in 6" (48 fl. oz/20 lb. cap.) and 8" (72 fl. oz/30 lb. cap) dia. sizes from high-grade gray cast iron, these pots are designed to hold their heat. The loop on the steel bail turns freely in the ears of the pot, reducing the chance of a spill. Solder Melting Pot 6" (152mm) P/N 61566 Weight: 9 lbs. (4.8kg) Solder Melting Pot 8" (203mm) P/N 61568 Weight: 13 lbs. (5.9kg) Pot Hook Handle P/N 07170 Weight: 8 oz. (.23 kg) Utility Propane Furnace The furnace is used to heat materials used in splicing operations. This efficient solder melting furnace delivers a hefty 43,000 BTU output on just 2 lbs./hour of conventional propane. To set up the furnace for use, connect the pressure regulator to the LP gas cylinder and the LP gas hose to the regulator and furnace. Use a regulator wrench to tighten all connections. P/N 70116 Weight: 9 lbs. 12 oz. (4.4kg.) Furnace Windshield P/N 70117 Weight:1 lbs. (.45 kg) Gas Hose Ideal for connecting a propane pressure regulator outlet to a propane-powered heater, ventilator or engine inlet. LP Gas Hose 10 ft. (305cm) P/N 76790 Weight: 2 lbs. 5 oz. (1kg) LP Gas Hose 30 ft. (914cm) P/N 76791 Weight: 6 lbs. 14 oz. (3kg) Pressure Regulator This UL listed all-brass unit works with torches and furnaces during heating operations. There s a 0-60 psi outlet pressure gauge, and you can adjust the pressure 5-60 psi Included are a POL inlet gland and nut (CGA 510) and a 9/16-18 LH hose outlet P/N 70118 Weight: 2 lbs. (.91kg) Lead Ringing Pliers An invaluable tool for anyone working with paper insulated lead cable The Sheathing and Insulation Cutter, also known as a Lead Ringer, is perfect for scoring the lead. It also enables the user to remove paper insulation up to the desired point, neatly, quickly, safely and efficiently. Maximum cable capacity: 1-7/16 O.D. For added user comfort, the tool has heavy duty plastic-dipped handles. LEAD CABLE TOOLS P/N 81142 Weight: 1 lbs. (.45kg) Four Panel Windshield Perfect for keeping wind away from lead sheath cable installation work materials, this shield features a welded steel grate and supporting brackets, providing broad support for large solder melting pots and kettles Galvanized Steel Construction Panel edges roll around 1/4" (6mm) dia. rod, eliminating sharp corners Folds flat for storage P/N 70121 Weight: 22lbs. (10kg) Compound Kettle This heavy duty device consists of a double jacketed 5-quart kettle for melting compounds. The outer jacket keeps the material at correct pouring temperature for extended periods. An integral heat conductor tube allows gases to escape and assures even melting of the compound. A double ring on the bail permits raising and lowering for manhole or aerial work. P/N 06130 Weight: 7 lbs. (3.2 kg) Solder Ladle A thermal handle shield isolates heat inside the cup from your hand, and keeps your thumb from slipping. Bowl diameter is 3-1/2" (89mm) Capacity is 12 oz. (355ml) P/N 06085 Weight: 1 lb. (.45kg) 41

LEAD CABLE TOOLS Stearine Candles Bundled in 6-lot packages, these 1 1/4" (32mm) dia. x 3 1/2" (89mm) L candles are the easiest way for you to apply stearic acid flux to lead cable. Formed from pure, single pressed stearic acid flux they are free from paraffin, vegetable oils, waxes and common contaminants. P/N 04320 Weight: 1 lbs. (.45kg) Splicer s Mirror This brass-framed 3 x 3" (7.6 X 7.6cm)heavy plate glass mirror lets you see the back side of the connection so you can easily make thorough checks on cable splices or wiped joints. P/N 74230 Weight: 4 oz. (113g) Soldering Irons These soldering irons are not made of iron but of 100% forged copper that s swaged onto the end of a one piece steel shank. Pyramid shaped on the working end and a solid wooden handle on the other to help keep the heat away from your hand. Nonelectrical coppers are used in pairs. This is done so one copper can be used as the other is being heated. The size designation of coppers refers to the weight (in pounds) of TWO copperheads; thus a reference to a pair of 4-pound coppers means that each copper head weighs 2 pounds. Heavy coppers are designed for soldering heavy gauge metals, and light coppers are for thinner metals. Using the incorrect size P/N Weight P/N Weight 67221 1 lb (.45 kg) 67222 2 lbs. (.90 kg) 67220 1 1/2 lbs. (.68 kg) 67223 3 lbs. (1.4 kg) Solder Pan This heavyweight sheet steel pan is made for catching solder drippings when wiping joints in cable splicing operations. The pan has folded corners, a folding loop handle at each end. P/N 06877 Weight: 4.5 lbs. (2.04 kg) Flat And Curved Wiping Cloths Used for wiping joints in lead covered cable sheath, these cloths are made from bed ticking which is finished with tallow and soap-stone dressings. Offered from 2 X 2" (51mm X 51mm) to 12 X 12" (305mm X 305mm), each wiping cloth is furnished individually wrapped. Properly folded and securely sewn P/N Size in. (mm) Shape Weight 62450 2 X 2 (51mm x 51mm) Curved 2 oz. (56g) 62451 2.5 X 2.5 (64mm x 64mm) Curved 2 oz. (56g) 62452 3.5 X 3.5 (89mm x 89mm) Curved 3 oz. (85g) 62453 3 X 3 (76mm x 76mm) Flat 2 oz. (56g) 62454 4 X 4 (102mm x 102mm) Flat 4 oz. (113g) 62455 5 X 5 (127mm x 127mm) Flat 5 oz. (142g) 62456 6 X 6 (152mm x 152mm) Flat 1 lb. (.45kg) 62457 6 X 7 (152mm x 178mm) Flat 1.2 lb. (.54kg) 62458 6 X 8 (152mm x 203mm) Flat 1.4 lb. (.63kg) 62460 7 X 8 (178mm x 203mm) Flat 1.5 lb. (.68kg) 62461 8 X 8 (203mm x 203mm) Flat 1.6 lb. (.73kg) 62462 8 X 10 (203mm x 254mm) Flat 1.8 lb. (.81kg) 62463 10 X 10 (254mm x 254mm) Flat 2 lb. (.91kg) 62464 10 X 12 (254mm x 305mm) Flat 2.2 lb. (1kg) 62465 12 X 12 (305mm X 305mm) Flat 2.5 lb. (1.1kg) Shave Hook Used for cleaning and preparing lead cable sheath and sleeves for soldering and wiping joints. Consists of a flat hardened steel blade riveted to a shank fitted with a plastic handle Blade has a sharp, beveled cutting edge which is circular in shape at one end and is brought to straight sided point at opposite end Is furnished with a leather guard P/N 07151 Weight: 8 oz. (.23kg) 42

Paraffin Dipper This dipper is built from tough 20 gauge steel, with a rolled bead around its top and pouring lip on either side. The long 9-3/4 in (248mm) handle is securely riveted to the body of the dipper and has a hook on one end for hanging P/N 06679 Weight: 1 lb. (.45kg) Poly Cable Dresser A more modern version of the high density wooden dresser, this cable dresser is manufactured from ultra-high molecular polyethylene. This weighted, durable product is ideal for forming and dressing lead cable. P/N 46113 Weight: 2 lbs. (.91kg) Steel Cable Dresser For dressing lead cable before splicing. In use, the dresser is placed on the cable and hammered to produce a smooth, even surface on the lead sheath. Made of tool steel with the edges rounded and a movable handle for different conditions. P/N 06765 Weight: 2 lbs. (.91kg) LEAD CABLE TOOLS Cable-Sheath Chipping/ Splitting Knife Cable-Sheath Chipping/Splitting Knife is a heavy-duty knife used for splitting cable sheaths. Forged tempered cutlery steel blade Sharp chisel-shaped edge Plastic-dipped handle for comfort P/N 81620 Weight: 1.2 lbs. (.54kg) Lead Sleeve Opener/Closer A ratchet operated hand tool whose design facilitates working on lead sleeves. When operating the ratchet in reverse, two parallel jaws spread the sleeve apart. To close a sleeve, pass the sash chain around the sleeve and attach it to the tool. Operating the ratchet will then draw the sleeve closed around the cable sheath or splice and retain a tight seam for neater soldering. P/N 01148 Weight: 3.5 lbs. (1.6kg) Lead Rasp This 15 in. (381mm) long Lead Rasp float has a rounded file for smoothing concave areas, and a flat one for planes. Both the Lead Rasp s width and thickness taper towards one end Supplied with wooden handle P/N 01009 Weight: 8 oz. (.23kg) 43