ISBN 978-0-626-27311-8 SANS 1332:2013 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Accessories for medium-voltage XLPE and impregnated paper-insulated power cables (3,8/6,6 kv to 19/33 kv) This national standard is the identical implementation of and is adopted in terms of a Memorandum of Agreement between the Electricity Suppliers Liaison Committee and the SABS Standards Division. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS
SANS 1332:2013 Edition 1 Table of changes Change No. Date Scope Foreword This South African standard was prepared by a working group of the Electricity Suppliers Liaison Committee and adopted by National Committee SABS/TC 066, Electric cables, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This adoption has been done in terms of a Memorandum of Agreement between the Electricity Suppliers Liaison Committee and the SABS Standards Division. This document was published in October 2013.
ACCESSORIES FOR MEDIUM-VOLTAGE XLPE AND IMPREGNATED PAPER-INSULATED POWER CABLES (3,8/6,6 kv to 19/33 kv) N R S
This specification is issued by the Standardization Section, Eskom on behalf of the User Group given in the foreword. Table of changes Change No. Date Text affected Correspondence to be directed to Printed or electronic copies obtainable from The NRS Projects Manager SABS Standards Division Standardization Section Private Bag X191 Industry Association Resource Centre Pretoria 0001 Eskom Private Bag X13 Halfway House 1685 Telephone : (011) 651 6832 Telephone : (012) 428 7911 Fax : (011) 651 6827 Fax : (012) 344 1568 E-mail : nrs@eskom.co.za E-mail : sales@sabs.co.za Website : http://www.nrs.eskom.co.za Website : http://www.sabs.co.za COPYRIGHT RESERVED Printed in the Republic of South Africa by the SABS Standards Division 1 Dr Lategan Road, Groenkloof, Pretoria
Foreword This specification was prepared on behalf of the Electricity Suppliers Liaison Committee (ESLC) and approved by it for use by supply authorities and other users, when purchasing joints and termination kits for medium-voltage power cables and aerial bundled conductors. This specification was prepared by a working group, which, at the time of publication, comprised the following members: R Kelly (Chairman) M Basson J Graham P O Halloran V Nundlal (Project Leader) E Ranyane C Tocknell Eskom, Group Technology Nelson Mandela Metropolitan Municipality City of Cape Town City Power Johannesburg Technology Standardization ethekwini Electricity Tshwane Municipality A Manufacturers Interest Group (MIG) was consulted on the contents of this specification and its comments were incorporated where the working group was in agreement. The MIG comprised the following members: F Balota G Brown B Edwards M Jackson K Motaung T Nortje N Pema D Phillips R Riley P Sheridan C van den Berg A van Oosten B Wagner G Whyte IPI Holdings Megatron Federal ABB Actom Powertech System Integrators Tyco Afritek Siemens 3M DSG-Canusa Jointmaster Tank Industries Iso-Tech Systems Actom This specification supersedes NRS 053:2008 (edition 2). Reference is made in 5.2 to a national accreditation system. In South Africa this means the South African National Accreditation System (SANAS). Reference is made in 5.4.5 to the national insulator pollution test site. In South Africa this means the Eskom Koeberg insulator pollution test site (KIPTS). Reference is made in 8.1(g) to the relevant qualifications authority. In South Africa this means the South African Qualifications Authority (SAQA). Reference is made in 8.1(g) to the relevant education and training authority. In South Africa this means The Energy Sector Education and Training Authority (ESETA) and the Manufacturing and Engineering Sector Education and Training Authority (MERSETA). Annexes C and D form an integral part of this specification. Annexes A and B are for information only.