PORTABLE LABORATORY For high voltage tests We offer a unique service throughout Spain, a mobile laboratory for checking high voltage electrical material at the customer facilities, at the substations at wind farms, hydroelectric power plants, solar parks, etc. On site tests Tests conducted by our technical operators in accordance with the applicable UNE standards for each. NEW! Insulating stick current leakage tests, threshold and voltage tests in voltage absence detectors. Issue of reports Sending report of the inspection and technical assessment in situ. WE CONDUCT Insulating stick current leakage tests. ACCREDITED BY Threshold voltage tests in voltage absence detectors. Test voltage trials for insulating gloves of all classes: CL I, CLII, CLIII, CLIV. NO 1221/LE2354 Equipment which can be tested includes: Insulating sticks and rescue sticks in accordance with UNE EN 50508 Insulating matting in accordance with UNE EN 61111 Insulating platforms in accordance with UNE EN 204001 Voltage detectors in accordance with UNE EN 61243-1 Insulating gloves in accordance with UNE EN 60903 Portable equipment for earthing in accordance with UNE EN 0-100 kv portable Insulating ladders UNE-EN 131
FREESTANDING SACKS for elevation of materials Freestanding sacks for elevation of materials to nacelle The interior mechanical system prevents the detachment of the canvas, permitting the handling of the equipment contained in the sack. kg Easy-to-fold Can be folded for transportation when empty. Lower anchorage Has lower anchorage for connection with the retained line. Load capacity Working load limit 250 kg. SPECIFICATIONS OF THE DEVICE Own manufacture. CE marking. Working load limit 250 kg. When unfolded, the canvas sacking remains taut, permitting access to the different equipment located within. Can be folded for transportation when empty. Lower cover of sack has outer layer of plywood, which can be replaced to guarantee long service life. Lower anchorage for connection with the retained line. Upper anchorage in two positions to guarantee access to the capsule sack. Made of high resistance 900 g/m2 canvas. Yellow finish for high visibility. With retroreflective tape for high visibility in poor light.
SAFETY LINES Installation Maintenance Installation and maintenance of horizontal, vertical safety lines and anchor points. Protects workspaces with risk of falls from a height of more than two metres, generating safe working protocols. PROJECTS Installation of vertical fall arrest systems Access ladders to wind towers. Protection of silos in companies from the paper industry. Protection of maintenance zones in slaughterhouses. Installation of horizontal fall arrest systems Gantry crane sliding rails. Building roofing for the installation of solar panels. Maintenance of building roofing. Tanker loader. ADDED VALUE Tesicnor has a computer programme for the management of the safety line maintenance. Safety Line ACCREDITATIONS We have the necessary training to ensure the correct installation and maintenance of these systems. We install and distribute the leading names in the sector.
INSPECTION Elevation equipment Verification of the correct conditions of use and resistance of the load elevation elements. A particularly important activity in the case of large or heavy loads, as given their characteristics, the presence of operators is required underneath the radius of action. INSPECTION SHEETS Tesicnor has specific sheets for the inspection of: DEVICE Steel cable slings Steel chain slings Flat slings Round slings Swivel eye bolts Pin and nut shackles Hoisting pulleys Rocker arms DEVELOPMENTS Inspection of own creations Inspection in the wind sector Inspection in the paper industry NON-DESTRUCTIVE TESTS ON OWN CREATIONS Magnetic particle inspection Liquid penetrant inspection of welds Ultrasonic testing Dimensional control
WIND TURBINE LOCK with security bolt and magnetic tape Anti-intruder protection in wind turbines and industrial installations, with double security: magnetic tape and security bolt. Exterior view Interior view Cross-section SPECIFICATIONS OF THE DEVICE Excellent anti-intruder resistance. The lock does not have any accessible exterior elements which can be handled. There are two security devices, magnetically coded exterior tape and interior bolt with security head. Door secured to the frame with MI 6 security bolt. The door is secured to the wind turbine frame, making leverage of the door more difficult. Permits opening from interior. Does not require electrical power, lock is activated with the natural magnetic field. Zinc-coated to protect against weathering.
GRID GUARDS to prevent ice falling on vehicles Protective grids to prevent ice that is detached from the wind turbines falling on vehicles below. Protection of the roof and front of the vehicle. 01 02 03 04 Designed in accordance with UNE 115231/2001. Absorbed energy above 700 joules. Impact test with absorbed energy equal to 2351 joules. Does not require special legalisation in the MOT to permit driving with the system folded up. SPECIFICATIONS OF THE DEVICE Own manufacture.. Does not require implementation of any legalisation in the MOT to permit driving with the system folded up on the roof of the vehicle. Rapid assembly of the guard on the vehicle, without the need for any special tools, or modifications to the vehicle chassis. Once the guard has been installed on the vehicle, it can be opened out and folded up by one person alone, as the front guard has two gas cylinders which assist the operator. The system has a high level of resistance as it has successfully passed tests intended for earthmoving equipment: UNE EN 115231 and 1365 joules of impact. The absorbed energy on front and upper impact is even higher. The standard requires 700 joules and the system withstood 2351 joules during the tests. Economically viable, as the only expenditure is on the system itself. No resources are required for legalisations, drafting of individual projects, etc.
ANCHOR DEVICES MODEL PAZ03/AW This anchor device complies with the safety requirements laid out in the European standard UNE EN 795: 2012 Class A for anchor devices and UNE EN 50308:2008. kn Anchor point 25 kn Users Connection Swivel and hinge. Maximum permitted load. Maximum number of users: 2. Permits connection of standard and wide opening carabineer. SPECIFICATIONS OF THE DEVICE Length of connection ring: 400 mm. Fastening with clamp for 80x80 profile (please enquire about other measurements). M6 tightening torque: 9 Nm. MI 2 tightening torque: 20 Nm. (Apply Loctite 270 in assembly). ISO 7379 10x16 torque: 2 Nm (Apply Loctite 270 in assembly). M20 tightening torque: 170 Nm. (Supplied with the torque applied). ngraved aluminium sheet clearly attached to the carabineer. Any device lacking this identification must be immediately replaced. The installation date must be recorded for regular inspection, at least annually, by a competent operator.
ANCHOR POINTS for wind turbines Anchor points specifically for wind turbines, compliant to UNE EN 50308: 2005. kn Designed for point load of 20 kn in any direction without breaking. Can be used by two people. SPECIFICATIONS OF THE DEVICE Own manufacture. Designed in accordance with UNE EN 50308:2005 and UNE EN 795: 2012. Working load limit 25 kn. Designed for point load of 20 kn. Swivel and hinge anchor point, permits correct orientation in any direction. Option to assemble directly on M20 bolt, or using base plate with two MI 0 bolts. Please enquire for other measurements. 62 mm opening of ring. This allows easy connection of two standard or wide-opening carabineers. Manufacture in zinc-coated F114 steel, ring painted yellow and with plate identifying maximum permitted load. Identification plate with: manufacture, model, serial number, working load limit and applicable standards.
ELEVATION EQUIPMENT Design, construction and certification Design of specific solutions for handling loads. Study and personalised design, adapted to both the element to be handled and the operating process. CERTIFICATION File Preparation de technical construction file. Compliance Declaration of conformity. User manual Instructions for use, assembly, dismounting, maintenance and cleaning. Marking CE and specifications plate. PRELIMINARY TEST Performance of tests and measurements, prior to start-up of the equipment in accordance with applicable standards. DEVELOPMENTS C-hooks for piping Rocker arms for specific applications Stock bench and elevation rocker arm Leveling and extraction bench
Handles to facilitate access to wind turbines Tesicnor designs, constructs and assembles fastenings adapted to the configuration of the wind turbine. Made in accordance with UNE EN 50308, these are an aid during ascension as they offer a safe grip in areas with a risk of falling. INITIAL SITUATION REAR VIEW HANDLE INSTALLED REQUIREMENTS AND SPECIFICATIONS OF THE SYSTEM Standard 50308. Handles with the same resistance as an anchor point. Areas with a risk of falling: These must be installed in areas with a risk of falling and where it is not possible to install guard rails. Logical position: In relation to the body and placed in the correct direction to provide support. Minimum length: 0.15 metres. Distances studied: If more than one handle is required to ensure adequate support for the body, these must be installed at a distance of 1 metre. Shape: Flat and rounded, and able to prevent hand from slipping. Free space: There must be a minimum free space for hands between the handle and any other part of the structure of 60 mm. Own manufacture Own design and construction. High level of resistance and long-lasting Fixed anchor point Design option with fixed anchor point.
Spill collector with built-in and floating channels Spill container/collector for oil from the wind turbine gearbox to the ground via pipe. Prevents oil spills in piping from reaching the ground and causing environmental damage. DESIGNED FOR ALSTOM GAMESA GENERAL ELECTRIC VESTAS SPECIFICATIONS OF THE SYSTEM Anti-puncture resistance Manufactured in 630 g PVC. Mounted at height, not touching the ground, thereby preventing friction and external damage. Permits direct drainage of oil accumulated in the collector to a suitable recipient. System uses neodymium magnets. These keep the collector in position as it extends around the tower. Assembly by one operator alone. Assembly in any environment, given that as it does not touch the ground, uneven ground is not an obstacle. Quick and easy to assemble Lightweight Weight of less than 25 kg. Internal structure made of aluminium. Aluminium provides a rigid and lightweight structure.
PORTABLE CRANE for elevation of loads Davit for raising loads to intermediate platforms of the wind turbine. SPECIFICATIONS OF THE DEVICE Own manufacture. Strenx 700 MC steel (high elastic limit). CE marking. Compliant to Directive 2006/42/EC of the European parliament and of the Council. 100 kg Working Load Limit (WLL). Connection The portable crane is connected to the connection flange of the tower sections. 13 kg Equipment weight. Divided into three pieces of: 2.5, 6 and 4.5 kilogrammes. Tower connection flange Transport backpack With interior foam casing for parts.
Perimeter guard rails at the entrance to wind turbine Perimeter protective system for access ladders to the wind turbine, designed and tested in accordance with UNE EN ISO 14122-3 section 7.3 and UNE EN 50308 section 4.4. Safety Ensures safety when entering or exiting the wind turbine. Versatile Design valid for different wind turbine models. Adaptability Design can be adapted to customer requirements. SPECIFICATIONS Own manufacture. Anti-corrosion resistance Hot-dipped galvanised finish, 85 microns. UNE EN ISO 14122-3/UNE EN 50308: Designed and tested in accordance with UNE EN ISO 14122-3 section 7.3 and UNE EN 50308 section 4.4. Tests performed by Cemitec, Cetena Foundation. Guaranteed safety: When entering or leaving the tower, and while opening the door. Competitive price: In manufacture and assembly. Has side plate for filling gaps. Hot-dipped galvanised finish and non-slip surface. ADAPTABLE ANCHORS Allow guard rails to be adapted to a large variety of wind turbine models.
DIS Tesicnor distributes material for the Personal and Collective protection equipment; in all economic sectors but we are specialised in the wind energy area. We offer a wide range of products from first labels. SERVICES DISTRIBUTION AND SUPPLY Harness SELLING Sale and distribution of Personal and Collective Protection Equipment, as well as professional advice regarding the products more appropriates for your necessities. Descenders Helmets and lanyards Lifelines Anti-fall arresters Signals RENTING We rent Personal Protection Equipment. PPE REVIEW Visual and functional inspection of the PPE for the work at height. Our brands Polígono Mocholí Río Elorz, nave 13 E, 31110 Noáin (Navarra)