Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto strut profile xl Incl. toothed belt drive; additional notes on the drive concept (p. -) F y max F z max M x max M y max M z max v max M max 3500 N 000 N Nm 1,0 x Nm 1, x Nm 5 m/s Nm 00995 L 3 x +6 M max Nm L H 5 10 155 9,5 1,5 0099 160 L H + +1 160 5600 Technical data See pages -5 for notes on layout and drive Complete axis L H / LF1S +50 L H 53 3 99 9 / L H / 10 00
Linear guides MGE. -1 Cam roller guide LF1S components 1 E F Components for the individual assembly of cam roller guides, with or without drive Parts list for cam roller guide LF1S without drive 3 G M N Component No. Qty. Page Profile xl 3 99 15 / 1-6 B Guide profile LF1S 3 99 3 / 1-1 5 D B O H C C Guide rod LF1 3 993 96 / -1 D Cover profile LF1S 3 993 06 / 1-1 E Profile x10 3 9 335 / 1 - F Cover cap x10 3 5 95 - G Guide bearing LF1 3 535 66-19 H Cover cap xl 3 5 59-6 M Cylinder bolt DIN 9 Mx n 1) N T-nut M, mm slot 3 5 n 1) 3-6 9 1931 O Sliding block 3 16 n 1) -1 1) For identification see page -1 11 E L M K J Parts list for cam roller guide LF1S with drive Component No. Qty. Page Profile xl LF LF 3 99 1 / 1-6 B Guide profile LF1S 3 99 3 / 1-1 C Guide rod LF1 3 993 96 / -1 1 1 G D B O I N C D Cover profile LF1S 3 993 06 / 1-1 E Profile x10 M1 M1 3 9 339 / 1 - G Guide bearing LF1 3 535 66-19 I Drive head LF1S 3 56 1 1-1 J Return head LF1S 3 56 1-1 K Toothed belt 3 99 1 / L 3 1) 1 - L Belt connector 3 535 60 - M Cylinder bolt DIN 9 Mx n ) N T-nut M, mm slot 3 5 n ) 3-15 16 1 1 19 193 O Sliding block 3 16 n ) -1 1) L 3 x - + 6 ) For identification see page -1 0 1 10 9,5 1,5 190
-1 MGE. Linear guides a Guide profile LF1S to hold the guide rods Installation on MGE strut profiles with mm slot or directly on a flat surface ly l z 191 a 0 3,50 kg/m 1 mm 9,60 cm 6,0 cm n x 0 L - (n x 0) a a 0...mm z y 1, 0 Guide profile LF1S 1 pcs 150 5600 3 99 3 / ccessories: aluminum, anodized 5 pcs 5600 3 511 1 Cylinder bolt DIN 9 Mx T-nut M, mm slot, 3 5 Sliding block, cover profile, guide rod z Cover profile to prevent contamination on threaded connections l y l z 193 0,3 kg/m mm 0,0 cm 3,0 cm y 1, 0 Cover profile LF1S 150 5600 3 993 06 / P; black Sliding block as a centering aid for mounting the guide profile in a mm profile slot Sliding block No. 50 3 16 DIN 9 - Mx 3 P; black 1965 3 5 The guide rod is pressed into the guide profile The guide rod guides the guide bearing Guide rod 0,9 kg/m LF1 150 0 1 3 993 96 / 195 1 0 0 3 539 15 Solid shaft V, induction hardened and polished Condition on delivery: ungreased; greasing according to assembly instructions 3 5 6
Linear guides MGE. -19 Guide bearing for trolley construction Supporting bearing for brackets for bearing o-center forces Guide rail to support supporting bearings (p. -0) 1 3 19 5 0,35 kg C,3 kn C 0 5,0 kn ø, 15,5 1,5 35,5,5-0, +0, Guide bearing for trolley construction Guiding via guide rod Rollers with ball bearings, permanently lubricated Lubricating felts with guide rod lubrication reservoir Play-free roller adjustment via eccentric bolts Replacement of the lubricating felts possible from rear in installed state 6 9 009 Guide bearing No. FS 0,35 kg C dyn,6 kn C stat 5,1 kn 15,5, 1,5 0095 35 FS1 DIN 9 Mx0 6,5,5 +0, -0, LF1 3 535 66 xfs1 Housing: Die-cast aluminum Roller: steel, hardened, polished Scope of delivery: incl. fastening material (FS) Condition on delivery: lubricating felts ungreased; greasing according to assembly instructions 3 5 6 Supporting bearing for brackets for bearing o-center forces For support on the guide rail Rollers with ball bearings, permanently lubricated Lubricating felts with guide rod lubrication reservoir Play-free roller adjustment via eccentric bolts Replacement of the lubricating felts possible from rear in installed state 11 1 1 15 16 1 1 FS Supporting bearing No. FS DIN 9 Mx0 LF1 3 535 666 xfs Housing: Die-cast aluminum Roller: steel, hardened, polished Scope of delivery: incl. fastening material (FS) Condition on delivery: lubricating felts ungreased; greasing according to assembly instructions 3 5 6 19 0 1
-0 MGE. Linear guides Guide rail to hold supporting bearings DIN 91 - M6X16 3 5 5 Guide rail L LF1 10 000 3 99 0 / L steel, hardened, polished Condition on delivery: ungreased; greasing according to assembly instructions 3 5 6 ccessories: cylinder bolt DIN 91 M6x16 T-nut M6, mm slot (3 5 5) ø11 ø6,6 a 3,00 kg/m 0099 a 0 n x 0 L L - (n x 0) a a...60mm
Linear guides MGE. -1 151, øh H,5 31,3 Ph 5 0 Drive head for transferring drive torque to a toothed belt For direct mounting of a motor or (in conjunction with a center shaft) for mounting a hollow shaft gear or a coupling (p. -6) Mounted directly on profile by using longitudinal end connector (connector included in scope of delivery) Profile finishing: LF blind hole drilling for longitudinal end connector 1 3 5 160 Pb,5 kg P b x P h : xl Drive head No. FS LF1S 3 56 1 xfs3, xfs Scope of delivery: Drive head: aluminum, anodized Cover caps: P, black Hollow shaft: steel; galvanized incl. fastening material (FS), cover caps 6 9 009 FS3 ISO Mx0 FS ISO 035 M-0 11 1 151, 160 5 Ph 0 Return head for tensioning the toothed belt and changing its direction Mounted directly on profile by using longitudinal end connector (connector included in scope of delivery) Profile finishing: LF blind hole drilling for longitudinal end connector Return head No. FS LF1S 3 56 xfs3, xfs Scope of delivery: aluminum, anodized Hollow shaft: steel; galvanized Caps: P; black incl. fastening material (FS), cover caps 1 15 16 1 1 19 Pb 3,5 kg P b x P h : xl FS3 ISO Mx0 FS ISO 035 M-0 0 1 1991
- MGE. Linear guides 5 5,,5 Belt connector suitable for trolley built out of strut profiles x10 ll connecting parts included for mounting on the profile end (LF1S) or in the slot (LF1C) Profile finishing for strut profile x10 for trolley LF1S: M1 19653 0,6 kg 10 Belt connector No. FS LF1 3 535 60 xfs5, xfs6, xfs, xfs, xfs9 aluminum, painted black Scope of delivery: incl. fastening material (FS) FS5 FS6 FS FS DIN9 M1x0 DIN 9 Mx DIN 15, DIN 991 Mx ø1x FS9 øxø5x11 Toothed belt as a trolley drive,5 Pitch: T Toothed belt L 3 0,1 kg/m LF1 0 50000 3 99 1 / L 3 1) 50000 3 56 1) L 3 x - + 6 001 L 3 n x mm PU with embedded steel wires