Section B RFS SOLENOID VALVES, PNEUMATIC VALVES AND COMPONENTS

Similar documents
Pneumatic Valve 4V100 Series

Lockable isolation 3/2-way valves Series MX 3/

2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA

Valves and Solenoid valves Series 7

121 1/8 NPT Solenoid and pneumatic valves size 0,86 in

5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm

Valves and Solenoid valves Series E 2/

APPLICATION OF SYSTEM 8

Pneumatically actuated valves 3/2 NC become NO when the supply is on connection 3.

STC Solenoid Valve List Price

System 6. ü ( System 6

VALVES ISO 5599/1, SERIES IPV-ISV

Series 3 valves are equipped with a manual override which allows a stable operation and they can use Series U or G solenoids (22x22).

Control Valve Specifications

System 8. Solenoid Coils Armature Assemblies Valve Systems. Nass Controls LP Nass Magnet GmbH Precision Controls Kft.

Complete Range of Movement Solutions

SPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4

VALVES SERIES 70, SOLENOID/PNEUMATIC

SOGEAC SOLENOID VALVE NASS MAGNET: SYSTEM 8. s.r.l.

SOLENOID VALVES AND PNEUMATIC VALVES

Servo-operated 2/2-way solenoid valves for steam Type EV225B

Data sheet. 2-way solenoid valves with Clip-on coils for neutral liquids and gases. January 2003 DKACV.PD.200.K B1472

System 13. ü ( System 13

INTEGRATED ELEMENTS. 1. FLIP-FLOP VALVES (pneumatic) ORDER CODIFICATION : AZ100354

Valve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body

5/2 and 5/3 Way Valves

Valve Islands Series F

AUSTRALIAN PART NUMBERS for SOLENOID VALVES IN AUSTRALIA WE SEPARATELY STOCK VALVES, SOLENOID COILS, AND CONNECTOR PLUGS ETC.

HERION SERIES Indirect solenoid actuated soft seal

COILS, CONNECTORS, SOLENOID VALVES

System 6. Solenoid Coils Armature Assemblies Valve Systems

C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 G1/4 8,5

3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.

2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid

Assisted lift operated 2/2-way solenoid valves Type EV250B

15 mm Pilot Valve. More technical specifications are reported in the following pages. 1

Assisted lift operated 2/2-way solenoid valves Type EV251B

Pneumatic Pilot - Operated Valves Series 3 and 4

2/2-way assisted lift operated solenoid valve type EV250B

Nugget 40, V08 series

zamak nitrile rubber self-extinguishing technopolymes aluminum

Electrically operated spool valve. The manual override is detent and is operated by screw driver.

Solenoid valves type EVSA 25 50

10 mm solenoid valves on manifold with multiconnection D-SUB

3/2-5/2 ports / positions

Solenoid valves, 2/2-way servo-operated type EV220B 6-22

nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel

Pneumatic. PVD Everdure Ceramic Valves

Extremely sturdy and corrosion-resistant Solenoid valves VOFC/VOFD and solenoid coils VACC. Selection and ordering

Solenoid valves VUVS/valve manifold VTUS, NPT

2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid

Our policy is one of continued research and development. We therefore reserve the right

3 Port Solenoid Valve Pilot Operated Poppet Type. External pilot

02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,

Solenoid valve Types EV220B 15 - EV220B 50

Information 3 Form A 4 Industrial Form Type B 12 Form B 16 Form C 18 Micro Type C 22

On-off Valves MS-EE, Inch Series Overview

Pneumatic. PVD Ceramic Valves

Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2

97105 Inline. Ordering information. Technical data. Accessories See page 5

2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4

Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)

Solenoid valve Types EV220B 15 - EV220B 50

Series 77 & 78. Compact & Modular Valves. solutions. Series 77 - Compact Valves. Series 77 - Sub-D. Series 77 - Fieldbus

5 Port Pilot Operated Solenoid Valve Rubber Seal, Plug-in/Non Plug-in. Standard Specifications. Fluid Operating pressure range

A K 3 E D G

Type EV224B. Servo-operated 2/2-way solenoid valves for high pressure air. Data sheet

Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)

Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends

Solenoid valves 2/2-way servo operated type EV220B 15 50

5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO #1, #2, #3, #4 Steel reinforced main seals

ELECTRO-PNEUMATIC CONTROL VALVES

Servo-operated 2/2-way solenoid valves for high pressure

SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function)

Solenoid valves VZWP, servo-controlled

4V130P-430P SERIES AIR PILOT VALVE

VALVES SERIES 70 DISTRIBUTORS

B1 VALVES SERIES 70 DISTRIBUTORS B1.12

SOLENOID VALVES AND PNEUMATIC VALVES

valvole VDMA 18 mm azionamento pneumatico

Solenoid valve. Solenoid Coil

Servo piston operated 2/2-way solenoid valves for steam Type EV245B

DIRECTIONAL CONTROL VALVES CETOP 3/NG6

Series MI-01, MI-02, MI-03

Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)

Series VP4 50/4 70. Large Size 5 Port Solenoid Valve Rubber Seal SJ SY SY SV SYJ SZ VF VP4 S0700 VQ VQ4 VQ5 VQC VQC4 VQZ SQ VFS VFR VQ7 VP4

ISO Standard Solenoid Valve/SIZEq Rubber Seal Series VP7 6

SPOOL VALVE. solenoid air operated 3/2 G 1/4. SPECIFICATIONS : air or neutral gas, filtered, lubricated or not PORTS : G 1/4 CONSTRUCTION

14,5 PSC PSP PSR. INTEGRATED SUB-BASE MANIFOLD valve with no subbase

Valves For Process Industry. Engineered Pneumatic Solutions.

COMPACT VALVE - 1/2 Series DS2

V New VSVA. Solenoid/pneumatic valves, ISO Electrically or pneumatically actuated valves. With internal or external pilot air

COMPACT VALVE - 1/4 Series DS2

Actuated Valves. Product Information

Solenoid coil Types BB, BE, BF, BG, and BN

BM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162

Test. What type of cylinder would you use? A. Single-acting cylinder B. Double-acting cylinder Answer:

VALVES ISO 5599/1, SERIES IPV-ISV

SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, 1/4

Accessories and spare parts

Transcription:

Section B RFS SOLENOID VALVES, PNEUMATIC VALVES AND COMPONENTS

SOLENOID VALVES 5 port - 1/8" port size 4V100 SERIES - 06 ( port sizes 1/8" ) - technical features - MODEL 4V110-06 4V10-06 4V130C-06 4V130E-06 4V130P-06 5/ 5/ 5/3 5/3 5/3 monostable bistable closed center open center press. center Fluids filtered air (0 micron), better if it's lubricated Working pressure 1,5 8 bar 8 bar Max test pressure 1 bar Eff. Sectional area mm 1 1 9 9 9 Ambient/fluid range temper. da - 5 C a + 50 C Response time ( 5 bar ) 0,05 sec Max working frequency 3 cycles/sec 3 cycles/sec cycles/sec cycles/sec cycles/sec Manual override push botton ( monostable ) / with screwdriver ( bistable ) Standard tension 4V DC / 4V AC / 110V AC / 0V AC Permissible voltage variation ± 10% Coil insulation class classe F Off min residual voltage holding AC 5VA holding DC,8W Protection degree IP65 COILS: 18mm width with 8mm hole for armature (.BOB18 ) 4V110 5/ monostable 4V10 5/ bistable 4V130C 5/3 closed center INTERNAL STRUCTURE 1 connector coil nut 3 coil nut 4 armature 5 fixed plate 6 piston 7 pilot kit 8 body 9 wear ring 10 bottom cover 11 fixed screw 1 spool spring 13 bottom cover gasket 14 spool o-ring 15 spool 16 piston o-ring 17 molla di comando 18 override spring 19 spring holder 0 return spring 1 side cover spring holder 4V130E 5/3 open center 4V130P 5/3 pressure center 4V 1 ORDERING NUMBER 10-06 - 00C 10 5/ monostable 00C without coil 0 5/ bistable 0400C with 4V DC coil valve type 30C 5/3 vie closed center 0450C with 4V AC coil 30E 5/3 vie open center 11050C with 110V AC coil 5/ - 5/3 30P 5/3 vie pressure center 050C with 0V AC coil valves series 06 1/8" port size (M5 on requst ) BB1-1

SOLENOID VALVES 5 port - 1/8" port size 4V100 SERIES - 06 ( port sizes 1/8" ) - dimensions - 4V110 4V10 53,5 3,5 53,5 3,5 98 4V130 53,5 3,5 69,8 6,8 54,8 154,6 69,8 6,8 54,8 139,6 A B C D E F G 4V110-06 1/8" 8 14, 16 0 3 4V10-06 1/8" 8 56 16 6,8 3 4V130-06 1/8" 8 56,3 16 6 3 BB1-

SOLENOID VALVES 5 port - 1/4" port size 4V00 SERIES - 08 ( port sizes 1/4" ) - technical features - Fluids Working pressure Max test pressure Eff. Sectional area mm Ambient/fluid range temper. Response time ( 5 bar ) Max working frequency Manual override Standard tension Permissible voltage variation Coil insulation class Off min residual voltage Protection degree MODELLO 4V10-08 4V0-08 4V30C-08 4V30E-08 4V30P-08 5/ 5/ 5/3 5/3 5/3 monostable bistable closed center open center press. center filtered air (0 micron), better if it's lubricated 1,5 8 bar 8 bar 1 bar 1 1 9 9 9 da - 5 C a + 50 C 0,05 sec 3 cycles/sec 3 cycles/sec cycles/sec cycles/sec cycles/sec push botton ( monostable ) / with screwdriver ( bistable ) 4V DC / 4V AC / 110V AC / 0V AC ± 10% classe F holding AC 5,5VA holding DC 4,8W IP65 COILS: mm width with 9mm hole for armature (.BOB ) 4V10 5/ monostable 4V0 5/ bistable 4V30C 5/3 closed center INTERNAL STRUCTURE 1 connector coil nut 3 coil nut 4 armature 5 fixed plate 6 piston 7 pilot kit 8 body 9 wear ring 10 bottom cover 11 fixed screw 1 spool spring 13 bottom cover gasket 14 spool o-ring 15 spool 16 piston o-ring 17 molla di comando 18 override spring 19 spring holder 0 return spring 1 side cover spring holder 4V30E 5/3 open center 4V30P 5/3 pressure center 4V ORDERING NUMBER 10-08 - 00C 10 5/ monostable 00C without coil 0 5/ bistable 0400C with 4V DC coil valve type 30C 5/3 vie closed center 0450C with 4V AC coil 30E 5/3 vie open center 11050C with 110V AC coil 5/ - 5/3 30P 5/3 vie pressure center 050C with 0V AC coil valves series 08 1/4" port size (1/8" on requst ) BB1-3

SOLENOID VALVES 5 port - 1/4" port size 4V00 SERIES - 08 ( port sizes 1/4" ) - dimensions - 4V10 4V0 66,5 66,5 116 169,8 4V30 66,5 65,9 84,9 189 A B C D E 4V10-08 1/8" 1/4" 18,5 3 4V0-08 1/8" 1/4" 1 74,4 3 4V30-08 1/8" 1/4" 1 74,4 3 BB1-4

PNEUMATIC VALVES 5 port - 1/8" port size 4A100 SERIES - 06 ( port sizes 1/8" ) - technical features - Fluids Working pressure Max test pressure Eff. Sectional area mm Ambient/fluid range temper. Max working pressure MODEL 4A110-06 4A10-06 4A130C-06 4A130E-06 4V130P-06 5/ 5/ 5/3 5/3 5/3 monostable bistable closed center open center press. center filtered air (0 micron), better if it's lubricated 1,5 8 bar 8 bar 1 bar 1 1 9 9 9 da - 5 C a + 50 C 3 cycles/sec 3 cycles/sec cycles/sec cycles/sec cycles/sec INTERNAL STRUCTURE 4A110 5/ monostable 4A10 5/ bistable 4A130C 5/3 closed center 1 screw spring 3 bottom cover 4 bottom cover gasket 5 body 6 o-ring pistone 7 spool 8 wear ring 9 piston 10 pilot body 11 o-ring pistone 1 screw 13 screw 14 spring holder 15 return spring 16 spring holder 17 E clip 18 side cover 4A130E 5/3 open center 4A130P 5/3 pressure center 4A ORDERING NUMBER 1 10-06 - 10 5/ monostable 0 5/ bistable valves type 30C 5/3 vie closed center 30E 5/3 vie open center 5/ - 5/3 30P 5/3 vie pressure center valves series 06 1/8" port size (M5 on requst ) BB1-5

PNEUMATIC VALVES 5 port - 1/8" port size 4A100 SERIES - 06 ( port sizes 1/8" ) - dimensions - 4A110 4A10 4A130 5,5 6,5 A B C D E F G 4A110-06 1/8" 8 14, 1 16 0, 3 4A10-06 1/8" 8 6,5 1 16 3,5 3 4A130-06 1/8" 8 41,5 1 16 3,5 3 BB1-6

PNEUMATIC VALVES 5 port - 1/4" port size 4A00 SERIES - 08 ( port sizes 1/4" ) - technical features - Fluids Working pressure Max test pressure Eff. Sectional area mm Ambient/fluid range temper. Max working pressure MODEL 4A10-08 4A0-08 4A30C-08 4A30E-08 4V30P-08 5/ 5/ 5/3 5/3 5/3 monostable bistable closed center open center press. center filtered air (0 micron), better if it's lubricated 1,5 8 bar 8 bar 1 bar 1 1 9 9 9 da - 5 C a + 50 C 3 cycles/sec 3 cycles/sec cycles/sec cycles/sec cycles/sec INTERNAL STRUCTURE 4A10 5/ monostable 4A0 5/ bistable 4A30C 5/3 closed center 1 screw spring 3 bottom cover 4 bottom cover gasket 5 body 6 o-ring pistone 7 spool 8 wear ring 9 piston 10 pilot body 11 o-ring pistone 1 screw 13 screw 14 spring holder 15 return spring 16 spring holder 17 E clip 18 side cover 4A30E 5/3 open center 4A30P 5/3 pressure center 4A ORDERING NUMBER 10-08 - 10 5/ monostable 0 5/ bistable valves type 30C 5/3 vie closed center 30E 5/3 vie open center 5/ - 5/3 30P 5/3 vie pressure center valves series 08 1/4" port size (1/8" on requst ) BB1-7

PNEUMATIC VALVES 5 port - 1/4" port size 4A00 SERIES - 08 ( port sizes 1/4" ) - dimensions - 4A10 4A0 4A30 9 A B C D E 4A10-06 1/8" 1/4" 1 1, 3 4A0-06 1/8" 1/4" 1 35,5 3 4A30-06 1/8" 1/4" 1 35,5 3 BB1-8

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback