Ball valve C 00 PROP / C 00 DOS Additional options on request Silicone free www.asv-stuebbe.com/products/instrumentation PVC-U PP PVDF Nominal size DN 0 50 Nominal size /8 Nominal pressure PN 0 6 bar C 00 PROP Characteristics C 00 PROP Proportional ball valve based on the C 00 Reproducible settings by means of 90 scale disk Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Economic alternative for diaphragm valves Simple automation using electric variable speed actuators Reproducible settings by means of 90 scale disk / scale division 5 Flow rate max. 5,000 l/h (DN 50) Characteristics C 00 DOS Dosing ball valve based on the C 00 Finely adjustable using 80 opening angle Reproducible settings by means of 80 scale disk / scale division 5 Simple automation using electric variable speed actuators Flow rate max.,000 l/h (DN 5) Nominal size DN 0 5 Nominal size /8 Nominal pressure PN 0 6 bar C 00 DOS
Pictograph Ball valve C 00 PROP Options Makes: Valpes l (J&J) Wide-range voltage ranges: 5 0 V AC/DC 00 40 V AC/DC Heating Failsafe manual electric Actuator PVC-U PP PVDF Connection Seal EPDM FPM 4 5 6 7 7 8 Socket Thread Spigot Thread Flange C 00 PROP Basic nominal diameters: DN 8 DN 0 DN 5 DN 0 DN 5 DN DN 40 DN 50 DN 65 DN 80 DN 00 DN 5 DN 50 DN 00 DN 50 DN 00 DN 50 DN 400 available not available On request» silicone free Connection material (pipe connection) PVC-U socket DIN* Socket ANSI, BS, JIS Female thread Rp.457 female thread Rp Male thread R.040 female thread Rp Male thread R PP PVDF * incl. DN 0 socket DIN* Female thread Rp socket DIN* 4 5 6 7 8 PE PP PE spigot (90 mm) spigot IR spigot (90 mm) PVDF spigot IR PP/St. flange ANSI GFK flange DIN PP/St. flange DIN, ANSI
Pictograph Ball valve C 00 DOS Options Makes: Valpes l (J&J) Wide-range voltage ranges: 5 0 V AC/DC 00 40 V AC/DC Heating Failsafe manual electric Actuator PVC-U PP PVDF Connection Seal EPDM FPM 4 5 6 7 7 8 Socket Thread Spigot Thread Flange C 00 DOS Basic nominal diameters: DN 8 DN 0 DN 5 DN 0 DN 5 DN DN 40 DN 50 DN 65 DN 80 DN 00 DN 5 DN 50 DN 00 DN 50 DN 00 DN 50 DN 400 available not available On request» silicone free Connection material (pipe connection) PVC-U socket DIN* Socket ANSI, BS, JIS Female thread Rp.457 female thread Rp Male thread R.040 female thread Rp Male thread R PP PVDF * incl. DN 0 socket DIN* Female thread Rp socket DIN* 4 5 6 7 8 PE PP PE spigot (90 mm) spigot IR spigot (90 mm) PVDF spigot IR PP/st. flange ANSI GFR flange DIN PP/st. flange DIN, ANSI
Ball valve C 00 PROP / C 00 DOS Use Chemical and industrial plant engineering Application Proportional ball valve C 00 PROP: For precise and reproducible dosing of neutral or aggressive fluids free of solid particles for medium-strength volume flows for dosing applications with high linearity demands as an alternative for diaphragm valves manual or electric automation Dosing ball valve C 00 DOS For precise and reproducible dosing of neutral or aggressive fluids free of solid particles for low-strength volume flows and high dosing accuracy manual or electric automation Testing Requirements and testing according to DIN EN ISO 65 and ISO 99 Leakage rate A tested according to DIN EN 66 Flow medium Neutral and aggressive fluid or gaseous media free of solid particles, provided that the valve components coming into contact with the media are resistant at the operating temperature in accordance with the ASV resistance guide. Flow direction marked with arrow on the housing ASV resistance guide www.asv-stuebbe.de/pdf_resistance/0005.pdf Process temperature see pressure/temperature diagram Process pressure see pressure/temperature diagram Nominal pressure (H O, 0 C) PN 0 6 bar Size C 00 PROP: DN 0 50 C 00 DOS: DN 0 5 Actuation manual: with hand lever electric: with electric variable speed actuator, DIN EN ISO 5 (additional option) Connection Union nut with connection thread suitable for plastic materials Material with medium contact Housing: PVC-U, PP, PVDF Ball: PVC-U, PP, PVDF Ball pivot: PVC-U, PP glass fibre reinforced, PVDF Ball seal: PTFE Sealing element, O-ring: FPM, EPDM Material without medium contact Hand lever, scale disc: ASA Fastening via two threaded inserts (Ensate inserts) in the mounting base Mounting position any; however, observe the flow direction Basic valve colour Housing: PVC-U, grey, RAL 70 Housing: PP, grey, RAL 70 Housing: PVDF, opaque, yellowish-white Hand lever: black, RAL 9005 Hand lever inlay: orange, RAL 004 Scale disc: orange, RAL 004 Device connection see pictograph Additional options Electric variable speed actuator Valpes Electric variable speed actuator JJ Accessories Retrofitting set for automatic valves 4
Ball valve C 00 PROP / C 00 DOS Pressure/temperature diagram The pressure/temperature limits of the materials are valid for the stated nominal pressures and a service life of 5 years. These values are guide values for flow medium types which do not negatively impact the physical and chemical characteristics of the valve material. It may be necessary to take diminution factors into consideration. The operating life of the wear parts depends on the conditions of use. P T Operating pressure Temperature 5
Ball valve C 00 PROP / C 00 DOS Flow Q at delta p bar 60000 C 00 PROP 50000 DN 50 40000 DN 40 Q (l/h) 0000 0000 0000 DN DN 5 DN 0 DN 5 0 0 5 0 45 60 75 90 x ( ) C 00 DOS 000 500 DN5 000 DN0 Q (l/h) 500 000 DN5 500 0 0 5 0 45 60 75 90 05 0 5 50 65 80 x ( ) Q X Flow Scale graduation 6
Ball valve C 00 PROP / C 00 DOS with hand lever with hand lever Connection, PE spigot/socket d d h H h H M M Connection, PP-(PVDF-)spigot/ flange Connection female thread/ male thread D Rp h H L L L v L L L L E L L L v E E d b R D K D Basic valve dimensions d (mm) 0 5 40 50 6 DN (mm) 5 0 5 40 50 DN (inch) / /4 /4 / Dimension Housing material Union end variant b PVDF PP/St. flange DIN 4.5 5.5 7.5 7.5 9 PP / PVC-U GFR flange DIN 4 5 7 7 8.5 PP / PVC-U / PVDF PP/St. flange ANSI 6 6 8 8 d PVDF PP/St. flange DIN 4 4 4 8 8 8 PP / PVC-U GFR flange DIN 4 4 4 8 8 8 PP / PVC-U / PVDF PP/St. flange ANSI 6 6 6 6 6 0 D PVDF PP/St. flange DIN 96 06 6 4 5 66 PP / PVC-U GFR flange DIN 96.5 06 5 4 5 68 PP / PVC-U / PVDF PP/St. flange ANSI 95 05 0 60 D PP / PVC-U / PVDF 50.5 59 70.5 86 99.5 6 E 66.5 8.5 8.5 9.5 9.5 4 h 7 0 40 46 55 70 H PP / PVC-U / PVDF 6 77 86 0 6 5 K PVDF PP/St. flange DIN 65 75 85 00 0 5 PP / PVC-U GFR flange DIN 65 75 85 00 0 5 PP / PVC-U / PVDF PP/St. flange ANSI 60 70 80 89 98 L PP / PVC-U / PVDF PP/St. flange DIN/ANSI GFR flange DIN 50 70 80 0 0 78 L PVDF PVDF spigot 0 4 50 7.5 9.5 0 PP PP spigot 4.5 5 7 9 PE spigot 6.5 45 5 65.5 69 8 PVC-U PE spigot 6 45 5 65 69 8 Male thread R,457 /,040 5 8 5.5 78 85 L PVDF 56 65 7 85.5 89.5 0 PP 56.5 65 7 85.5 89 0 PVC-U 56 65 7 85 89 0 L PVDF PVDF socket DIN 66 77 8 99.5 05.5 7 PP PP socket DIN 67 77 8 00 06 7 PP female thread Rp 6.5 7 8 99 06 7 PVC-U PVC-U socket DIN 6 7 79 94 96 08 PVC-U socket ANSI 6 7 79 94 96 08 PVC-U socket BS 6 7 77 9 95 07 PVC-U socket JIS 6 7 77 9 96.5 07 PVC-U female thread Rp 6 7 79 94 96 08,457/,040- Female thread Rp 6 7 79 94 96 08 M PP / PVC-U / PVDF M5 M5 M6 M8 M8 M8 R,457/,040- Male thread R Rp,457/,040/PP/PVC-U- Female thread Rp / /4 /4 / / /4 /4 / v PP / PVC-U / PVDF 5 5 6 45 45 45 v M 7
Additional options Ball valve C 00 PROP / C 00 DOS Electric variable speed actuator with basic valve Variable speed actuator Valpes N N Dimensions, variable speed actuator Valpes d (mm) 6 0 5 40 50 6 DN (mm) 0 5 0 5 40 50 DN (inch) /8 / /4 /4 / h 7.0 7.0 0.0 40.0 46.0 55.0 70.0 h 6.5 6.5 69.0 77.0 86.5 9.5 08.0 H 5.0 5.0 5.0 5.0 5.0 5.0 5.0 N 88.0 88.0 88.0 88.0 88.0 88.0 88.0 N 05.0 05.0 05.0 05.0 05.0 05.0 05.0 O 9.0 9.0 9.0 9.0 9.0 9.0 9.0 H h O Dimensions, variable speed actuator J&J d (mm) 6 0 5 40 50 6 DN (mm) 0 5 0 5 40 50 DN (inch) /8 / /4 /4 / h 7.0 7.0 0.0 40.0 46.0 55.0 70.0 h 6.5 6.5 69.0 77.0 86.5 9.5 08.0 H 48.0 48.0 48.0 48.0 48.0 48.0 48.0 N 5.0 5.0 5.0 5.0 5.0 5.0 5.0 N 0.0 0.0 0.0 0.0 0.0 0.0 0.0 O 0.0 0.0 0.0 0.0 0.0 0.0 0.0 N N O h h H h Note Variable speed actuator J&J Electric actuators may not be installed in an over-head position! 8
Additional options Ball valve C 00 PROP / C 00 DOS Electric variable speed actuator Valpes Technical data Manufacturer: Valpes ER ER 0 Plus incl. heater, extendible Actuator type Low voltage Mains voltage Torque (Nm) 0 0 Voltage AC (V) 5 0 00 40 Voltage DC (V) 48 00 50 Manipulating time (s) Setting angle ( ) 90 90 Power consumption (W) 5 5 Weight (kg) Duty cycle (%) 50 50 Protection type (IP) 66 66 Temperature ( C) -0 55-0 55 Heating Included Included Options Fail-Safe/rechargeable battery pack Fail-Safe/rechargeable battery pack Variable speed actuator Variable speed actuator Variable speed actuator 9
Additional options Ball valve C 00 PROP / C 00 DOS Electric variable speed actuator Valpes Wiring diagram Manufacturer: Valpes ER Connection A Voltage supply Connection B Feedback, switch N - TP/PE L 4 5 6 7 8 9 FC0 FCF FC FC FC FC FC FC 5V-0V 50/60Hz (V-48V DC) 00V-40V 50/60Hz (00V-50V DC) TP/PE ~ ~ SNAA690000 P6 POSI 4 5 6 SNAA8000 0-0mA / 4-0mA / 0-0V Connection B Actual value/set-point value current loop Connection A: Voltage supply Connection B: Feedback, switch A Voltage supply AC/DC Connection of the neutral conductor (N/AC) / Minus ( /DC) Connection of the phase / Plus (L/) Connection B: Actual value/set-point value current loop B Actual value/set-point value current loop 0 0 ma / 4 0 ma / 0 0 V Feedback / Actual value () 4 0 0 ma / 4 0 ma / 0 0 V Feedback / Actual value ( ) 5 0 0 ma / 4 0 ma / 0 0 V Set-point value ( ) 6 0 0 ma / 4 0 ma / 0 0 V Set-point value () B Feedback FC Limit switch, valve»open«fc Limit switch, valve»closed«m Motor 4 FC COM 5 FC (NO) 6 FC COM 7 FC (NO) 8 FC (NC) 9 FC (NC) 0
Additional options Ball valve C 00 PROP / C 00 DOS Electric variable speed actuator J&J Technical data Manufacturer: J&J J incl. heater, extendible Actuator type Low voltage Mains voltage Torque (Nm) 0 0 Voltage AC (V) 4 85 40 Voltage DC (V) 4 85 40 Manipulating time (s) Setting angle ( ) 90 90 Power consumption (W) 6 0V 9W; 0V 44W Weight (kg).8.8 Duty cycle (%) 75 75 Protection type (IP) 65 65 Temperature ( C) -0 70-0 70 Heating Yes Yes Options Fail-Safe/rechargeable battery pack Fail-Safe/rechargeable battery pack Variable speed actuator Variable speed actuator Variable speed actuator
Additional options Ball valve C 00 PROP / C 00 DOS Electric variable speed actuator J&J Wiring diagram Manufacturer: J&J ST ST ST4 N - VAC/VDC L Modell H/L 0 Voltage supply Control signal connection Limit switches external Ausgang/Output Eingang/Input L Zu/Close Ausgang/Output L L Auf/Open Limit switches internal ST ST ST4 ST4 COM COM Eingang/Input - Voltage supply AC/DC Connection of the neutral conductor (N/AC) / Minus ( /DC) Connection of the phase / Plus (L/) Limit switches Connection of the voltage input COM (/L) Connection of the limit switch output (/L)»CLOSED«Connection of the limit switch output (/L)»OPEN«Control signal connection Connection Minus ( ) 4 0 ma / 0 0 V Input set-point value () 4 0 ma / 0 0 V Output Feedback / actual value ()
Ball valve C 00 PROP / C 00 DOS Basic valve with hand lever, connection socket Electric variable speed actuator Valpes / J&J with basic valve 6 6 5 7 8 0 4 4 9 7 8 8 7 5 5 4 Position Quantity Designation Housing Ball DOS Ball PROP 4 Ball pivot 5 Union threaded neck 6 Hand lever 7 Union end 8 Union nut 9 Ball seat 0 O-ring O-ring O-ring O-ring 4 Ball seat 5 Locking slide 6 Hand lever inlay 7 Scale disc PROP 8 Scale disc DOS Position Quantity Designation Ball valve Mounting box, bottom section Mounting box, top section 5 Electric actuator 6 Drive adapter