Modularity and simplicity in action. ÂÂ Cost effective, easy to design and install

84 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of the three basic components (access style driver, latch body or cam) in either geometry or material, the E5 can be easily adjusted to suit most applications. Product features ÂÂ Cost effective, easy to design and install ÂÂ Multiple material and access options to suit multiple needs ÂÂ Sealed to meet NEMA 4 / IP65 standards ÂÂ Corrosion-resistant materials available ÂÂ Highly modular and configurable Match material and finish options for style and functionality requirements A variety of materials and finishes to complement your application. Die-cast zinc latch bodies standard finishes: Chrome plated Black powder coated Corrosion resistant materials available 316 Stainless steel Glass-filled nylon, black 304 Stainless steel E5 Removable handle version Dual handle / key function Flush installation Premium finish and corrosion resistance Select one of these four styles to fit your access requirements There are four basic E5 styles to meet specific door configuration and mounting requirements in terms of design, depth, surface protrusion and operation style. 27.2 (1.07) 23.7 (0.93) A 36 (1.42) 46 (1.81) See www.southco.com/e5a for details E5 Standard Industry standard, highly modular and configurable options in a wide choice of materials, finishes and access styles. (See pages 86-89, 92-95) E5 Low Profile Stylish, low profile design. Tool and hand operated access styles in zinc alloy chrome plated or black powder coated. (See page 88) E5 Push-to-Close Standard E5 with the added functionality of a springloaded cam or actuator for single or multi-point operation. Provides quicker turn-to-open, push-to-close action. (See pages 96-97) E5 Flush Cup Wing Knob Stylish oval cup design. Provides a clean, flush outer surface. Ideal for multi-point actuation of large doors in aesthetically pleasing applications. (See pages 90-91) www.southco.com

85 Choose from a wide range of operating styles to fit application and industry requirements. ÂÂ Convenient hand-operated wing knob, T and L-handle styles for easy hand access ÂÂ Tool operated for restricted access, flush-mount or low-profile clearances, and industry-specifc standards ÂÂ Key operated for added security Hand operable Tool / key operable T-handle key-locking T-handle non-locking Wing knob locking Wing knob non-locking 3 (.11) 5 (.19) 9 (.35) Slotted Recessed slot L-handle key-locking L-handle non-locking Short wing Tall wing 6 (.24) Railway standard Hex recess Bellcore 216 Bellcore electronics Flush wing recess Cylinder lock Determine your grip options for a perfect fit (Total grip includes the dimensions of all elements in-between the mounting surface of the latch and the latch's contact surface on the frame - including door thickness, compressed seals and gaskets, accessories, frame offset, etc.) Installation Some SOUTHCO E5 latches are shipped latch and cam separately and some completely pre-assembled. See product pages for details. Cam Sealing washer Mounting nut Screw Selecting the right cam for the E5 is easy once the total grip is known. Southco provides a wide selection of standard cams in many grip increments, and special ones like hook and push-to-close cams. Standard cams provide vibration resistance and grip variation tolerance. E5 Standard Latch and cam shipped separately. E5 Low Profile Latch and cam shipped pre-assembled.

86 E5 Cam Latch Stainless steel Tool operated Fixed grip Single hole install Latched / unlatched indicator Stainless steel, 304 or 316 grade Performance Details Max. static load: 304 Stainless steel 550 N (124 lbf) 316 Stainless steel 670 N (150 lbf) Sealing NEMA 4 / IP65 achieved using gasket supplied Installation Mounting nut: Max. tightening torque: 20 N m (177 in lbf) Screw Max. tightening torque 10 N m (90 in lbf) Keys and Accessories See page 98-101 +0.1 20.1-0 +.004 (.79 ) -.000 H Head Styles Slotted Hex recess 6 (.24) Max. 1 (.04) Min. Ø 28 (1.10) 36±4 (1.42±.15) +0.5 +.02 Ø 22.5 (.89 ) -0 -.00 19 (.75) 8 (.31) 5 (.20) 0.5 (.02) Sealing washer (compressed) 28 (1.10) Mounting nut Optional Detent Version Detent housing prevents accidental cam movement. Cam securely detents in place both in open and closed positions. 4 (.16) Internal O-ring Internal spring 3 (.11) Cam 45 (1.77) 5 (.19) 23 (.91) Bellcore 216 Railway standard Selection Order latch and cam separately Latch (no cam) E5 - B - H M - UU1 B Body 6 Normal housing 32 Detented housing H Head style 00 Slotted 01 Hex recess 02 03 04 M Material 24 304 Stainless steel 27 316 Stainless steel 05 06 3 (.11) 07 5 (.19) 13 Bellcore 216 22 Railway standard 304 Stainless steel 316 Stainless steel Cam Table (order separately from latch) 304 Stainless steel 316 Stainless steel 304 Stainless steel 316 Stainless steel 304 Stainless steel 316 Stainless steel 4 (.16) E5-8003 E5-9003 14 (.55) E5-8008 E5-9008 24 (.94) E5-8013 E5-9013 34 (1.34) E5-8018 E5-9018 6 (.24) E5-8004 E5-9004 16 (.63) E5-8009 E5-9009 26 (1.02) E5-8014 E5-9014 36 (1.42) E5-8019 E5-9019 8 (.31) E5-8005 E5-9005 18 (.71) E5-8010 E5-9010 28 (1.10) E5-8015 E5-9015 38 (1.50) E5-8020 E5-9020 10 (.39) E5-8006 E5-9006 20 (.79) E5-8011 E5-9011 30 (1.18) E5-8016 E5-9016 40 (1.57) E5-8021 E5-9021 12 (.47) E5-8007 E5-9007 22 (.87) E5-8012 E5-9012 32 (1.25) E5-8017 E5-9017 42 (1.65) E5-8022 E5-9022

E5 Cam Latch Zinc Tool operated Fixed grip 87 +0.1 20.1-0 +.004 (.79 ) -.000 H Head Styles Slotted Hex recess 6 (.24) Max. 1 (.04) Min. Ø 28 (1.10) 36±4 (1.42±.15) +0.5 +.02 Ø 22.5 (.89 ) -0 -.00 19 (.75) 5 (.20) 0.5 (.02) Sealing washer (compressed) 27.2 (1.07) Mounting nut 4 (.16) Internal O-ring Internal spring 3 (.11) Cam 45 (1.77) 5 (.19) 23 (.91) recess Bellcore 216 Single hole install Latched / unlatched indicator Zinc alloy, powder coated or chrome plated and steel, zinc plated Performance Details Max. static load: 330 N (74 lbf) Installation Mounting nut: Max. tightening torque: 10 N m (88 in lbf) Screw Max. tightening torque: 5 N m (45 in lbf) Sealing NEMA 4 / IP65 achieved using gasket supplied Keys and Accessories See pages 98-101 Suitable for push-to-close action see pages 96-97 Bellcore electronics Recessed slot (tamper resistant) E5-6 - F Finish 2 Bright chrome 5 Black powder coated Railway standard Latch (no cam) H F - UU1 H Head style 00 Slotted 01 Hex recess 02 03 04 05 06 3 (.11) 07 5 (.19) 08 recess 13 Bellcore 216 19 Bellcore electronics 21 Recessed slot (tamper resistant) 22 Railway standard Selection Order latch and cam separately Cam Table (order separately from latch) 4 (.16) E5-6003 14 (.55) E5-6008 24 (.94) E5-6013 34 (1.34) E5-6018 6 (.24) E5-6004 16 (.63) E5-6009 26 (1.02) E5-6014 36 (1.42) E5-6019 8 (.31) E5-6005 18 (.71) E5-6010 28 (1.10) E5-6015 38 (1.50) E5-6020 10 (.39) E5-6006 20 (.79) E5-6011 30 (1.18) E5-6016 40 (1.57) E5-6021 12 (.47) E5-6007 22 (.87) E5-6012 32 (1.25) E5-6017 42 (1.65) E5-6022

88 E5 Cam Latch Low Profile Zinc Tool or hand operated Fixed grip Single hole install Latched / unlatched indicator Shipped fully assembled Zinc alloy, powder coated or chrome plated and steel, zinc plated Performance Details Max. static load: 330 N (74 lbf) Installation Mounting nut Max. tightening torque: 10 N m (88 in lbf) Keys and Accessories See pages 98-101 Selection Latch is shipped fully assembled For door thicknesses 1-6 (.039 -.236) grip must exceed door thickness range by 4 (.157) for assembled installation When sealing option is selected add 0.4 (.02) to grip calculation to accommodate sealing washer Ø 31 (1.22) +0.1 20.1 0 +.004 (.79 ) -.000 H Head style 00 Slotted 01 Hex recess 02 03 04 05 06 3 (.11) 7.5 (.30) for Bellcore 216 Drive stud 4.5 (.18) for all other head styles except wing versions 45 D (1.77) thickness G 14 (.55) Max 1 (.04) Min Housing Mounting nut M 22 X 1.5 thread Detent washer Cam 23.7 (.93) For short housing 31.7 (1.25) For long housing 36±4 (1.42±.15) +.02 Ø 22.5 +/- 0.2 (.89 ) -.00 07 5 (.19) 08 recess 11 Short wing 12 Tall wing 13 Bellcore 216 19 Bellcore Electronics H Head Styles E5 - D - H F - G S Slotted Hex recess recess Bellcore 216 14.5 (.57) Short wing Bellcore electronics 3 (.11) 19.5 (.77) F Finish 1 Textured chrome 5 Black powder coated 5 (.19) Tall wing S Sealing option 0 No o-ring or external seal 1 O-ring and external seal to meet NEMA 4/IP65 standards D thickness range 1 1-6 (.039 -.236) (short housing supplied) 2 1-14 (.039 - (.551) (long housing supplied) G table G Short housing Long housing G Short housing Long housing G Short housing Long housing G Short housing Long housing 00 Do not use 6 (.24) 05 8 (.31) 16 (.63) 10 18 (.71) 26 (1.02) 15 28 (1.10) 36 (1.42) 01 Do not use 8 (.31) 06 10 (.39) 18 (.71) 11 20 (.79) 28 (1.10) 16 30 (1.18) 38 (1.50) 02 2 (.08) 10 (.39) 07 12 (.47) 20 (.79) 12 22 (.87) 30 (1.18) 17 32 (1.25) 40 (1.57) 03 4 (.16) 12 (.47) 08 14 (.55) 22 (.87) 13 24 (.94) 32 (1.25) 18 34 (1.34) 42 (1.65) 04 6 (.24) 14 (.55) 09 16 (.63) 24 (.94) 14 26 (1.02) 34 (1.34) 19 36 (1.42) 44 (1.73) If grip falls between two choices, use the smaller option

E5 Cam Latch Glass-filled nylon Tool operated Fixed grip 89 +0.1 20.1-0 +.004 (.79 ) -.000 6 (.24) Max. 1 (.04) Min. Ø 28 (1.10) 36±4 (1.42±.15) +0.5 +.02 Ø 22.5 (.89 ) -0 -.00 19 (.75) 5 (.20) 0.5 (.02) Sealing washer (compressed) 25 (.98) Mounting nut 4 (.16) Self tapping screw Internal O-ring Internal spring Cam 45 (1.77) 23 (.91) Single hole install Latched / unlatched indicator Glass-filled nylon and steel, zinc plated Performance Details Max. static load: 300 N (67 lbf) Installation Mounting nut: Max. tightening torque: 4.25 N m (38 in lbf) Screw Max. tightening torque: 3.1 N m (27 in lbf) Keys and Accessories See pages 98-101 H Head Styles Slotted 3 (.11) 5 (.19) 6 (.24) 9 (.35) Latch (no cam) E5-6 - H 3 - UU1 H Head style 00 Slotted 02 03 04 05 06 3 (.11) 07 5 (.19) 14 6 (.24) 15 9 (.35) Selection Order latch and cam separately Part Number Cam Table (order separately from latch) Part Number Part Number Part Number 4 (.16) E5-6003 14 (.55) E5-6008 24 (.94) E5-6013 34 (1.34) E5-6018 6 (.24) E5-6004 16 (.63) E5-6009 26 (1.02) E5-6014 36 (1.42) E5-6019 8 (.31) E5-6005 18 (.71) E5-6010 28 (1.10) E5-6015 38 (1.50) E5-6020 10 (.39) E5-6006 20 (.79) E5-6011 30 (1.18) E5-6016 40 (1.57) E5-6021 12 (.47) E5-6007 22 (.87) E5-6012 32 (1.25) E5-6017 42 (1.65) E5-6022

90 E5 Cam Latch Zinc Flush cup wing style Hand operated Fixed grip Low profile Multiple key code options Zinc alloy, powder coated and steel, zinc plated Performance Details Max. static load: 330 N (74 lbf) Installation Mounting nuts 10-24 UNC (supplied) max. tightening torque: 3 N m (25 in lbf) Screw max. tightening torque: 10 N m (90 in lbf) Keys See page 98 Two point push-to-close action: Internal spring causes return of wing knob and actuator to original latched position when wing knob is released after opening. Ideal for use with cables and rotary latches. For lock core selection and a complete overview of the SOUTHCO Key-Choice System see pages 182-183 Single Point Two Point (for use with rods) Two Point Push-to-Close Action (spring-loaded) 96 (3.8) Max. door thickness Mounting nut 3.2 (.125) 2.4 (.094) 46 (1.8) 4 (.16) 2 Holes Ø 5.5± 0.1 (.22±.003) 76 (3.0) Type A (reverse frame for type B) Type A 23 (.91) 60 (2.36) 19 (.75) Single point cam 9.2 (0.36) 51±4 (2.00±.16) Single point only 31 (1.22) Rod clearance Actuator (supplied) 4.4 (.18) 36 (1.42) 46 (1.8) Actuator (supplied) Rods (see pages 264-265) 6.5 (.26) Ø 6.1 (.24) 20 (.80) 55 (2.18) Two point actuator (order separately) 18 (.7) 51 (2.0) Cables 3.5 (.14) 15.2 (.59) Ø 65.5±0.5 (2.57±.02) 40±0.2 (1.57±.007) 80±0.3 (3.14±.01)

91 R Rotation Type B Turn counter-clockwise to latch Type A Turn clockwise to latch L Lock Styles Non-locking key code CH751 key code R001 (order lock core separately) Latch (no cam) E5-9 R - L 5 - A S - 1 K R Rotation 1 Type A clockwise to latch 2 Type B counterclockwise to latch L Lock Style 30 Non-locking (omit last 2 digits from part number) 31 black lock core keyed alike CH751 32 stainless steel scalp and shuttered lock core keyed alike R001 33 Without lock core (omit last 2 digits from part number) Order lock core separately, see pages 182-183 S Sealing option 0 Non-sealing (when A = TR or TL) 1 Sealed (when A = UU or RR) K Key options 0 No keys supplied (order separately) 3 1 Overmolded key supplied A Assembly status UU Single point order cam separately RR Two point (for use with rods) - actuator supplied TR Type A two point push-to-close (order actuator separately) TL Type B two point push-to-close (order actuator separately) Cam Table (order separately from latch) 22.7 (.89) E5-6603 30.7 (1.21) E5-6607 24.7 (.97) E5-6604 32.7 (1.29) E5-6608 26.7 (1.05) E5-6605 34.7 (1.37) E5-6609 28.7 (1.13) E5-6606 36.7 (1.44) E5-6610 If grip falls between two choices, use the smaller option Selection Single point Order latch and cam separately Two point (for use with rods) Order latch only (two point actuator supplied) Two point push-to-close action (spring loaded) Order latch and actuator separately. Actuator part number A5-91-201-11, see page 99 for details. To be used with SOUTHCO R4 rotary series latches and cables see pages 120-131.

92 E5 Cam Latch Zinc L-handle Hand operated Fixed grip Single hole install Multiple key codes Zinc alloy, powder coated or chrome plated and steel, zinc plated Performance Details Max. static load: 330 N (74 lbf) Sealing NEMA 4 / IP65 achieved using gasket supplied Installation Mounting nut: Max. tightening torque: 10 N m (88 in lbf) Screw max. tightening torque: 10 N m (90 in lbf) Keys See page 98 Suitable for push-to-close action see pages 96-97 For lock core selection and a complete overview of the SOUTHCO Key-Choice System see pages 182-183 For adjustable grip versions see pages 102-103 Selection Order latch and cam separately Ø 28 (1.10) Ø 25 (.98) L Lock Style Non-locking Latch (no cam) Key code CH751 112.5 (4.42) Key code R001 E5-9 - L F - UU1-1 K L Lock style 70 Non-locking (omit last two digits of part number) 71 Keyed CH751 (lock core finish matches handle finish) 72 Keyed R001 (stainless steel scalp shuttered) 73 Without lock core (omit last two digits of part number) Order lock core separately, see pages 182-183 0.5 (.02) Sealing washer (compressed) 17.9 (.7) (order lock core separately) 27 (1.06) +0.1 20.1-0 +.004 (.79 ) -.000 4 (.16) 6 (.24) Max. 1 (.04) Min. F Finish 2 Bright chrome 5 Black powder coated 36±4 (1.42±.15) +0.5 +.02 Ø 22.5 (.89 ) -0 36 (1.42) K Key options 0 No keys supplied (order separately) 3 1 Overmolded key supplied 23 (.91) 45 (1.77) -.00 Cam Table (order separately from latch) 4 (.16) E5-6003 14 (.55) E5-6008 24 (.94) E5-6013 34 (1.34) E5-6018 6 (.24) E5-6004 16 (.63) E5-6009 26 (1.02) E5-6014 36 (1.42) E5-6019 8 (.31) E5-6005 18 (.71) E5-6010 28 (1.10) E5-6015 38 (1.50) E5-6020 10 (.39) E5-6006 20 (.79) E5-6011 30 (1.18) E5-6016 40 (1.57) E5-6021 12 (.47) E5-6007 22 (.87) E5-6012 32 (1.25) E5-6017 42 (1.65) E5-6022 If grip falls between two choices, use the smaller option

E5 Cam Latch Zinc T-handle Hand operated Fixed grip 93 Ø 28 (1.10) L Lock Style Non-locking Latch (no cam) 82.5 (3.25) key code CH751 key code R001 22 (.88) E5-9 - L F - UU1-1 K L Lock style 60 Non-locking (omit last two digits of part number) 61 Keyed CH751 (lock core finish matches handle finish) 62 Keyed R001 (stainless steel scalp shuttered) 63 Without lock core (omit last two digits of part number) Order lock core separately, see page 182-183 0.5 (.02) Sealing washer (compressed) 27 (1.06) (order lock core separately) 4 (.16) +0.1 20.1-0 +.004 (.79 ) -.000 6 (.24) Max. 1 (.04) Min. F Finish 2 Bright chrome 5 Black powder coated 36±4 (1.42±.15) +0.5 +.02 Ø 22.5 (.89 ) -0 23 (.91) 45 (1.77) K Key options 0 No keys supplied (order separately) 3 1 Overmolded key supplied -.00 32 (1.25) Single hole install Multiple key codes Zinc alloy, powder coated or chrome plated and steel, zinc plated Performance Details Max. static load: 330 N (74 lbf) Sealing NEMA 4 / IP65 achieved using gasket supplied Installation Mounting nut: Max. tightening torque: 10 N m (88 in lbf) Screw: Max. tightening torque: 10 N m (90 in lbf) Keys See page 98 Suitable for push-to-close action see pages 96-97 For adjustable grip versions see pages 102-103 For lock core selection and a complete overview of the SOUTHCO Key-Choice System see pages 182-183 Selection Order latch and cam separately Cam Table (order separately from latch) 4 (.16) E5-6003 14 (.55) E5-6008 24 (.94) E5-6013 34 (1.34) E5-6018 6 (.24) E5-6004 16 (.63) E5-6009 26 (1.02) E5-6014 36 (1.42) E5-6019 8 (.31) E5-6005 18 (.71) E5-6010 28 (1.10) E5-6015 38 (1.50) E5-6020 10 (.39) E5-6006 20 (.79) E5-6011 30 (1.18) E5-6016 40 (1.57) E5-6021 12 (.47) E5-6007 22 (.87) E5-6012 32 (1.25) E5-6017 42 (1.65) E5-6022 If grip falls between two choices, use the smaller option

94 E5 Cam Latch Zinc Wing style Padlockable wing style Fixed grip Single hole install Multiple key codes Wing: Zinc alloy, black powder coated and steel, zinc plated Padlockable wing: Zinc alloy, chrome plated and steel, zinc plated Performance Details Max. static load: 330 N (74 lbf) Sealing Wing style sealed to meet NEMA4 / IP65 standards Installation Mounting nut max. tightening torque: 10 N m (88 in lbf) Screw Max. tightening torque: 5 N m (45 in lbf) Keys See page 98 Wing style suitable for push-toclose action see pages 96-97 For lock core selection and a complete overview of the SOUTHCO Key-Choice System see pages 182-183 Selection Order latch and cam separately Cam part number see table page 95 Selection Order latch and cam separately Cam part number see table page 95 Wing Ø 28 (1.10) L Lock Styles Non-locking Latch (no cam) E5-9 - L 5 - UU1-1 K L Lock style 30 Non-locking (omit last two digits of part number) 31 black lock core keyed alike CH751 32 stainless steel scalp and shuttered lock core keyed alike R001 33 Without lock core (omit last two digits of part number) Order lock core separately, see pages 182-183 Padlockable Wing 50 (1.97) key code CH751 Ø 28 (1.10) Padlock thru hole Ø 8 (.31) R Rotation 1 Type B counter-clockwise to latch 2 Type A clockwise to latch 19 (.75) key code R001 19 (.75) 21 (.83) 27 (1.06) 4 (.16) lock core (order separately) 27.5 (1.08) 16.5 (.66) 4 (.16) 56 (2.00) 45 (1.77) 23 (.91) K Key options 0 No keys supplied (order separately) 3 1 Overmolded key supplied Latch (no cam) 45 (1.77) 0.5 (.02) Sealing washer (compressed) 23 (.91) 0.5 (.02) Sealing washer E5-31 - 5 R 2 - UU0

E5 Cam Latch Zinc Cylinder lock Fixed grip 95 Cylinder Lock 5 (.20) 0.5 (.02) Sealing washer (compressed) Single hole install Latched / unlatched indicator Ø 28 (1.10) 19 (.75) +0.1 20.1-0 +.004 (.79 ) -.000 27.2 (1.07) Mounting nut 4 (.16) 36±4 (1.42±.15) Cam 45 (1.77) 23 (.91) Zinc alloy, powder coated and steel, zinc plated Scalp stainless steel Performance Details Max. static load: 330 N (74 lbf) Installation Mounting nut max. tightening torque: 10 N m (88 in lbf) Screw Max. tightening torque: 5 N m (45 in lbf) Sealing NEMA 4 / IP65 achieved using gasket supplied +0.5 +.02 Ø 22.5 (.89 ) -0 -.00 Keys and Accessories See pages 98-101 6 (.24) Max. 1 (.04) Min. Suitable for push-to-close action see pages 96-97 F Finish 2 Bright Chrome 5 Black powder coated K Key options CH751 0 No keys supplied (order separately) 2 2 Flat keys supplied Selection Order latch and cam separately Latch (no cam) E5-5 - 40 F - UU1-1 K Cam Table (order separately from latch) 4 (.16) E5-6003 14 (.55) E5-6008 24 (.94) E5-6013 34 (1.34) E5-6018 6 (.24) E5-6004 16 (.63) E5-6009 26 (1.02) E5-6014 36 (1.42) E5-6019 8 (.31) E5-6005 18 (.71) E5-6010 28 (1.10) E5-6015 38 (1.50) E5-6020 10 (.39) E5-6006 20 (.79) E5-6011 30 (1.18) E5-6016 40 (1.57) E5-6021 12 (.47) E5-6007 22 (.87) E5-6012 32 (1.25) E5-6017 42 (1.65) E5-6022 If grip falls between two choices, use the smaller option

96 E5 Cam Latch Zinc Push-to-close Hand, key or tool operated Single and two point Single hole installation Latched / unlatched indicator Push-to-close action Zinc alloy, powder coated and steel, zinc plated Performance Details Max. static load: 330 N (74 lbf) Installation Mounting nut max. tightening torque: 10 N m (88 in lbf) Screw Max. tightening torque: 5 N m (45 in lbf) for two point actuator only Keys and Accessories See pages 98-101 Single Point: Push-to-close action in unlocked position only or key inserted (cylinder lock) Two Point: Order actuator separately For lock core selection and a complete overview of the SOUTHCO Key-Choice System see pages 182-183 Actuator A5-91-201-11, see page 99 for details Two point to be used with SOUTHCO R4 rotary series latches and cables see page 120-131 Two point push to close action: Internal spring causes return of driver and actuator to original latched position when driver is released after opening. Ideal for use with cables and rotary latches. Single Point Spring-Loaded (Type A tool operated shown) Ø 28 (1.10) Operation +0.1 20.1 0 +.004 (.79 ) -.000 A 26±1.5 (.94±.06) (For single point only) +0.5 Ø 22.5 (.89 ) 0 18 (.70) Rotation identification 2. Ramp-shaped cam rotates as it contacts frame +.02 -.00 5 (.20) Two Point Spring-Loaded (Type A hand operated shown) Ø 28 (1.10) R Rotation Type A Cam rotates clockwise to latch 1. Push door towards frame Type B Cam rotates counter-clockwise to latch 0.5 (.02) Sealing washer (compressed) 31 (1.22) Mounting nut 8.3 (.32) 3. Cam springs back and moves behind frame to achieve latching 3.5 (.14) 21 (.83) 24.9 (.98) Mounting nut 56 (2.00) Two Point Actuator Ø 6.1 (.24) 33 (1.30) 0.5 (.02) Sealing washer (compressed) Two point actuator (order separately) Cable actuator (see notes) 51 (2.0) 18 (.7) 15.2 (.59) 21 (.83) 6 (.24) Max 1 (.04) Min

97 Hand / Key Operated F Finish 2 Bright chrome (not available for wing type) 5 Black powder coated T Type 5 Cylinder lock keyed alike CH751 9 Wing / T-handle / L-handle E5 - T - L F - R 0-1 K Selection Latch supplied fully assembled R Rotation 51 Type A single point (for visual identification cam stamped A or B) 52 Type B single point (for visual identification cam stamped A or B) TR Type A two point (order actuator separately) TL Type B two point (order actuator separately) K Key options 0 No keys supplied (order separately) 3 1 Overmolded key supplied L T = 5 T = 9 Lock style Cylinder Lock Wing T-handle L-handle Non-locking (omit last two digits of part number) ~ 30 60 70 Keyed CH751 (lock core finish matches handle finish) ~ 31 61 71 Keyed CH751 (stainless steel scalp shuttered) 40 ~ ~ ~ Keyed R001 reversible (stainless steel scalp shuttered) ~ 32 62 72 Without lock core (omit last two digits of part number) (to be ordered separately see pages 182-183) ~ 33 63 73 Tool Operated H Head Styles Slotted Hex recess 3 (.11) 5 (.19) recess Bellcore 216 Bellcore electronics Recessed slot (tamper resistant) Railway standard F Finish 2 Bright chrome 5 Black powder coated H Head style 00 Slotted 01 Hex recess 02 03 04 E5-6 - H F - R 0 05 06 3 (.11) 07 5 (.19) 08 recess 13 Bellcore 216 19 Bellcore electronics 21 Recessed slot (tamper resistant) 22 Railway standard Selection Latch supplied fully assembled R Rotation 51 Type A single point (for visual identification cam stamped A or B) 52 Type B single point (for visual identification cam stamped A or B) TR Type A two point (order actuator separately) TL Type B two point (order actuator separately)

98 E5 Cam Latch Accessories Keys Tool key: Zinc alloy or nylon Keys Zinc or Nylon 55 (2.2) Key Styles Overmolded key: Brass plated and ABS plastic black Flat key: Brass plated H Head style 2 3 (.11) 3 4 7 8 recess 9 5 (.19) (nylon only) 10 male (zinc only) 11 Bellcore electronics 12 Bellcore 216 (zinc only) 24 6 (.24) recess (nylon only) 56 (2.2) F Finish 1 Plated zinc 2 Natural zinc 3 Nylon, black 2 3 (.11) 3 4 7 8 recess 9 5 (.19) E3 - H - F 10 male 11 Bellcore electronics 12 Bellcore 216 24 6 (.24) recess Overmolded key CH751: Single: PK-10-10-05 Pair: PK-10-01-05 Overmolded key R001: Single: PK-10-10-05-KR001 Pair: PK-10-01-05-KR001 Overmolded Keys Key CH751 Key R001 Flat Keys Key CH751 Flat key Pair: PK-10-01 www.southco.com

E5 Cam Latch Accessories Multi-point actuators Hooked cam 99 Multi-Point Actuator Ø 6.1 (.24) 18 (.7) 15.2 (.59) 3.5 (.14) 6 (.23) Zinc alloy 2-Point Actuator plate (for multipoint see pages 264-265 for rods) (not recommended for key-locking) 51 (2.0) Not to be used with low profile E5 A5-91-201-11 Multi-Point Actuator - Low Profile 59 (2.32) 23 (.9) 23 (.9) 17 (.66) 2.4 (.09) Steel plated Actuator plate (for multi-point see pages 264-265 for rods) For use with all E5 latches Ø 6.2 (.24) 17.2 (.67) A8-4-01-03 Multi-Point Actuator 93.6 (3.68) 8.1 (.31) Zinc alloy and steel, zinc plated 22.2 (.87) 4.6 (.18) Actuator plate 18 (.7) 28.8 (1.13) Adaptor Ø 8.6 (.33) x 18 (.7) deep Actuator plate (for multi-point see pages 264-265 for rods) Not to be used with low profile E5 A5-90-101-11 Hooked Cam 8.1 (.32) 18 (.71) Ø 9.95 (.39) R4 4 (.16) Steel plated Not to be used with low profile E5 18 (.71) R28 10 (.39) Hooked Cam E5-6200 No stop 36 (.42) E5-6210 Stop for clockwise rotation E5-6220 Stop for counter-clockwise rotation www.southco.com

100 E5 Cam Latch Accessories Sealing washer Sealing cover Sealing washer: Neoprene natural Sealing cover: Thermoplastic elastomer, black Sealing Washer Ø 28.2 (1.11) 0.8 (.031) Sealing washer Installation To provide sealing: use two sealing washers and add compressed thickness of each washer and accessory thickness to your door thickness range. Ø 22.6 (.89) Sealing washer Accessory Sealing washer for use with all E5 products Sealing cover for use with tool operated and cylinder lock E5 only Sealing Cover 47 (1.84) 28 (1.09) 11.7 (.46) Ø 28.7 (1.13) 35 (1.38) 6.9 (.27) Ø 22.5 (.875) 19.6 (.77) See table Type Adjustment Formula Sealing washer E5-17 Add 0.4 (0.02) compressed height to door thickness range Sealing cover 90-3 Add 2.3 (.090) to door thickness range www.southco.com

E5 Cam Latch Accessories Padlock bracket Pull tab 101 Padlock Bracket () Ø 11 (.43) 42 (1.65) 24.5 (.96) 33 (1.30) Ø 22 (.87) 2 (.08) Padlock Bracket (Round) Ø 22.5 (.88) Ø 34 (1.34) 2 (.08) 25 (.98) Ø 11 (.43) Padlock bracket: Stainless steel, black powder coated Pull tab: Nylon, black Installation To provide sealing: use two sealing washers and add compressed thickness of each washer and accessory thickness to your door thickness range. Padlock brackets and pull tabs for use with tool operated and cylinder lock E5 only Pull Tab 2.4 (.093) 20 (.79) 20 (.79) Ø 22.2 (.88) 45 29 (1.78) (1.16) 16 (.63) 32 (1.25) Shown perpendicular to latch and cam Shown in-line with latch and cam Type Adjustment Formula Padlock bracket square E3-77-101-31 Add 2 (.08) to door thickness range Padlock bracket round E3-77-102-31 Add 2 (.08) to door thickness range Pull tab E5-18 Add 2.4 (.093) to door thickness range See table www.southco.com

Pawl/Cam Action Latches Southco Pawl/Cam Action Latches Designer Series, Quad Panel Latches Sealed to meet NEMA 4/IP-66 water intrusion standards with optional O-ring/Sealing Washer 13 access styles including hand-, tool-, and key-operated Latched/unlatched indicator Assembled and unassembled styles available Single-hole installation Ø 31 (1.22) 45 (1.77) DRIVE STUD PANEL THICKNESS 7.5 (.30) for Bellcore 216 4.5 (.18) for all other drivers HOUSING DETENT WASHER 23.7 (.93) For Housing I 31.7 (1.25) For Housing II Pawl Detail 17 (.67) 16 (.63) 3.2 (.13) 00 Offset (see page 81) 45 (1.77) 14 (.55) 3 (.12) GRIP NUT M 22 X 1.5 THREAD PAWL HEX FLANGE SCREW M6 THREAD Seals O-Ring TALL WING 19.5 (.77) SHORT WING 14.5 (.57) Ø 1.5 (.06) Sealing Washer Ø 28 (1.10) 0.8 (.03) Ø 13 (.51) Ø 22.3 (.88) DRIVE STUDS: (Chrome) Die-cast zinc, chrome plated. (Black) Die-cast zinc, natural; head is black powder coated. HOUSING: Die-cast zinc, acrylic latex sealer. PAWL: 1010 steel, zinc plate, chromate plus sealer. DETENT WASHER: 301 Stainless steel, passivated. HEX FLANGE SCREW: Low carbon steel, zinc plate, chromate plus sealer. MOUNTING NUT: Die-cast zinc, zinc plate, bright chromate. O-RING: Buna-N, black. Ordering Options: Latch Options Assembled (see pp.82-83) Unassembled (see pp.80-81) Thickness 1 (.04) - 6 (.24)* 1 (.04) - 14 (.55) Range 5 (.20) - 44 (1.73) *The grip must exceed door thickness by 4 (.16) 1 (.04) - 44 (1.73) Product Strength Guidelines (To assist in your product selection; samples are available for your evaluation.) SEALING WASHER: Neoprene, black. Maximum static load on pawl: 330 N (74 lbs.) Average ultimate load on pawl: 450 N (101 lbs.) millimeter (inch) millimeter (inch) Dimensions without tolerances are for reference only. 80 Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility.

Quad Panel Latches, (Unassembled Version) Use in panels 1 mm (.04) - 14 (.55) thick How to order: A complete assembly consists of one Housing, one Drive Stud and one Pawl, ordered separately. See page 82 to determine your maximum outer door thickness and grip. Use to order components below. Housing E 5 G V HOUSING STYLE 1 = HOUSING I [For panels 1 (.04) to 6 (.24) thick and grip 1(.04) to 20 (.79)] 2 = HOUSING II [For panels 1 (.04) to 14 (.55) thick and grips 6 (.24) to 44 (1.73)] 1.3 (.05) 2 (.08) Housing I 14.7 (.58) Housing II 22.7 (.89) Ø 28 (1.10) M22 X 1.5 THREAD Pawl/Cam Action Latches Drive Stud E 5 T V W W X DRIVE STUD STYLE 1 = For use with HOUSING I 2 = For use with HOUSING II 15 (.58) 2 (.07) SLOTTED WW = 00 HEX SOCKET WW = 01 HEAD STYLE (see below) TRIANGLE WW = 02 KEY PART NO. E3-3-1 0.3 (.01) FINISH 1 = Textured chrome plate 5 = Black powder coat TRIANGLE WW = 03 KEY PART NO. E3-7-1 SQUARE WW = 04 KEY PART NO. E3-4-1 19.5 (.77) SQUARE SQUARE WW = 05 KEY PART NO. E3-8-1 With: Housing I 19.3 (.76) Housing II 27.3 (1.07) 4.5 (.18) or 7.5 (.30) Bellcore 216 Ø 31 (1.22) M6 THREADED HOLE 10 (.39) mm DEEP 3 (.11) DOUBLE BIT WW = 06 KEY PART NO. E3-2-1 Pawl and Sealing Options Order Pawl Type Using HOUSING I Using HOUSING II Pawl Offset 5 (.19) DOUBLE BIT WW = 07 KEY PART NO. E3-9-1 E 5 P Y PAWL TYPE (see below) YY=00 YY=01 YY=02 YY=03 YY=04 YY=05 YY=06 YY=07 YY=08 YY=09 Do Not Use SQUARE SOCKET WW = 08 KEY PART NO. E3-10-1 Y Z 18 (.71) 16 (.63) 14 (.55) 14.5 (.57) SHORT WING WW = 11 19.5 (.77) TALL WING WW = 12 2 (.08) 4 (.16) 6 (.24) 8 (.31) 10 (.39) 12 (.47) 14 (.55) 16 (.63) 6 (.24) 8 (.31) 10 (.39) 12 (.47) 14 (.55) 16 (.63) 18 (.71) 20 (.79) 22 (.87) 24 (.94) 12 (.47) 10(.39) 8 (.31) Bellcore 216 Electronics Key (Bellcore) WW = 13 WW = 19 KEY PART NO. E3-12-1 KEY PART NO. E3-11-1 (Mounting Hardware package is included with Pawl.) If your grip falls between two choices, use the smaller one. SEALING OPTION 0 = No O-ring or sealing washer 1 = O-ring and sealing washer included for NEMA 4/IP-66 rating 6 (.24) 4 (.16) 2 (.08) 0 (0) Order Pawl Type GRIP Pawl Offset Order Pawl Type Using HOUSING I Using HOUSING II Pawl Offset YY=10 18 (.71) 26 (1.02) 2 (.08) YY=11 20 (.79) YY=12 YY=13 YY=14 YY=15 YY=16 YY=17 YY=18 YY=19 22 (.87) 24 (.94) 26 (1.02) 28 (1.10) 30 (1.18) 32 (1.25) 34 (1.34) 36 (1.42) 28 (1.10) 30 (1.18) 32 (1.25) 34 (1.34) 36 (1.42) 38 (1.50) 40 (1.57) 42 (1.65) 44 (1.73) 4 (.16) millimeter (inch) 6 (.24) 8 (.31) 10 (.39) 12 (.47) 14 (.55) 16 (.63) 18 (.71) 20 (.79) millimeter Pawl (inch) Offset Dimensions without tolerances are for reference only. Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility. Order Pawl Type GRIP 81