Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available in a variety of widths and materials and the belts also come in various pitches and materials. Slat Top Chains Steel Straight Running uni 810/8/815 uni 800/802/805 Side Flexing unichains Conveyor Chains uni 881 TAB uni 881 unichains Belt Systems uni Magnet Type uni 8811 uni 881 Super Flex uni 8811 Super Flex uni 8811 TAB Slat Top Chains Plastic Straight Running Plastic Chains Plastic chains are available in straight running and side flexing versions. Standard material for our plastic chains is acetal which is made in 3 different grades: D acetal polymers with selflubricating components; LF acetal polymers with improved selflubricating components; SLF acetal polymers with selflubricating additives to obtain the lowest possible friction resistance. unichains also produces plastic chains in other materials for use under special conditions. Types Available: Straight Running: uni 820/831 & uni 8. Side Flexing: uni 87 / 87 TAB, uni 880/880 TAB, uni 880 TABRT, uni 880 Superflex, uni 882 & uni 882 TAB Steel Chains uni 8 uni 820/831 Side Flexing uni 87/87 TAB unichains supplies slat top chains in straight running and sideflexing versions, with and without tabs. Magnet types are also available. unichains steel chains are made of steel alloys substantiated by certificates in the following 3 grades: Austenitic stainless steel, Ferritic stainless steel and Special hardened steel. Types Available: Straight Running: uni 810/8/815, uni 800/802/805. Side Flexing: uni 881, uni 881 TAB, uni magnet type, uni 881 Superflex, uni 8811, uni 8811 TAB, uni 8811 Superflex, uni 880/880 TAB All chains are available in a variety of widths and materials. Belt Systems uni 880 TABRT uni 880 Super Flex unichains manufacture both straight and side flexing belt systems, with side flexing uni FlexSNB being very popular. The belt systems are produced in several versions from closed to 36% open and with or without ribs. The pitches range between.7 and 50. Types Available: uni MSNB, UNI Light, uni CNB, uni SNB, uni SNB M2, uni Light EP, uni SSB, uni OPB, uni LSNB, uni MPB, uni Flex Belt, Reinforced Belts. All Belts are available in a variety of pitches and materials. uni 882 uni 882 TAB 1
For calls outside the UK Telephone +44 1777 7011 or Fax +44 1777 8683 FREEPHONE: 0800 66637 CONVEYOR COMPONENTS We are now able to supply a full range of components to suit your conveyor. In addition we can offer a wide range of maintenance free polymer bearings featured within, some of which are ideally suited to conveyor maintenance. Illustrated here is a selection of the components available. 1 CONVEYOR COMPONENTS Drive sprockets, idler wheels, corner discs. Chain return components. Lateral guides and guide rail clamps. Adjustable heads and knobs. Side mounting and support heads. Threaded tube ends. Thermoplastic chains. Straight and corner tracks. Cross clamps. Guide rail brackets and drip tray supports. Hinges and handles. Support bases and levelling elements. 2 BEARING SUPPORTS Flanged bearing support. Pillow block support. Takeup support. Cartridge/takeup support. Support for shafts from Ø to Ø. Flanged bearing support in stainless steel. Compact pillow block support. Cartridge support. Support with high corrosion resistance. 3 LEVELLING PADS Thermoplastic, steel and stainless steel supporting feet. Fixed feet. Threaded tube ends. Articulated feet with or without mounting holes. Vibration absorbing feet. Support bases. 4 STRUCTURAL COMPONENTS Connecting joints. Panel clamps. Fixing block. Spring loaded latch. Tube ends and closing caps. Mounting profiles. Profile for plain tubes. Magnetic lock. Hinges and Handles. 5 CONVEYOR CHAINS Straight running chains. Sideflexing chains magnetic system. Sideflexing chains with rubber pads. Sideflexing chains. Straight running chains with rubber pads. Straight and corner tracks. 2
Freephone lines are open between 8.00am and 5.pm 0800 80 FLEXIBLE ROLLER MODULES for Straight & Curved Sections FLEXIBLE ROLLER MODULE Straps in reinforced Polyamide; Supplied as single modules rollers in LFAcetal; Pins, Low Noise Rollers Spacers and Bolts in Stainless Excellent for Accumulation Areas Steel AISI 4. Long life and Smooth Operation Easy and Quick Installation FLAT BAR 16500 16505 x8 x10 SPLIT SHAFTING COLLARS SPLIT SHAFTING COLLAR Reinforced polyamide, bolts in Stainless Steel. Note: The new collars offer high These parts can be used on the conveyors corrosion resistance. The new part as a reference point when the side guides exhibits high strength at need to be repositioned. considerably less cost than stainless steel. The new collars are the ideal replacement for conventional collars in situations where they cannot be easily removed and replaced. d D L K 1 68 700 701 6 702 703 704 705 706 16 18 20 28 3 3 44 4 56 63 16 16 18 20 20 22 27 2 34 3 45 51,1 TCEI M3 TCEI M3 TCEI M3 TCEI M5 Applications: 3
For calls outside the UK Telephone +44 1777 7011 or Fax +44 1777 8683 FREEPHONE: 0800 66637 SUPPORT BASES BIPODS Reinforced polyamide threaded bushings and spacers in nickel plated brass, screws in Many other sizes available on all conveyor components! S/S AISI 4. please call! BIPODS 180 WITH JOINT Reinforced polyamide threaded bushings and spacers in nickel plated brass, screws in S/S AISI 4. Improved Load Resistance Improved Flex Resistance Improved Load Resistance Improved Flex Resistance BIPODS 0 WITH JOINT Reinforced polyamide, threaded bushings and spacers in nickel plated brass, screws in S/S AISI 4. Improved Load Resistance Improved Flex Resistance 157 1572 15732 15736 DFfor tube Ø 48,3 1 1/2 50, 153 15337 4 DFfor tube Ø 48,3 1 1/2 50, DFfor tube Ø 48,3 1 1/2 50,
Freephone lines are open between 8.00am and 5.pm 0800 80 SIDE GUIDE BRACKETS BRACKET WITH EYEBOLT BRACKET WITH EYEBOLT in S/S AISI 4, knob in in S/S AISI 4, knob in TRIPODS Reinforced polyamide, threaded bushings and spacers in nickel plated brass, screws in S/S AISI 4. Load Resistance Improved % Flex Resistance Improved 20% LA DF 1363 136,5 LA DF 13868 1386,5 BRACKET WITH EYEBOLT BRACKET WITH EYEBOLT in S/S AISI 4, knob in in S/S AISI 4, knob in LA DF LA DF 15507 15826 DFfor tube Ø 48,3 50, 1 1/2 13326 13328 13332 13334 10.5.5 16.5.5 16.5 132 13223 13224 13226 10.5 16,5 16,5 5
For calls outside the UK Telephone +44 1777 7011 or Fax +44 1777 8683 FREEPHONE: 0800 66637 QUICK RELEASE ADJUSTABLE HEADS QUICK RELEASE ADJUSTABLE HEAD Simply press down the release cap to move the grooved rod to a new position. Components External Housing (polyamide) Internal Housing (see the table) Closing Cap (polyamide) Screw and nut (AISI 4) Spring (steel) INTERNAL BLOCK 130 13185 REINFORCED POLYAMIDE REINFORCED POLYAMIDE DF FOR CORRECT USE OF THESE PRODUCTS AND TO GET THE BEST PERFORMANCE, PLEASE CALL OUR EXPERTS. DRIVE SPROCKETS for chains series 8SSG8815881M SPLIT SPROCKETS Polyamide, screws in S/S AISI 4, DIN 6885 key seat. Special shape of teeth compensates natural chain lengthening after prolonged use. Bore for axial locking only on request. Excellent wear and chemical resistance. Reduced noise level and quiet operation. Reinforced design. Completely closed structure, easier to clean and to disinfect. The design of the sprocket ensures smooth running and long service life. Increased keyway strength 6 05 1 138 13 06 1 1 2 3 08 8 150 151 C H S 1 117,0 61,,0,26 7,8 DF
Freephone lines are open between 8.00am and 5.pm 0800 80 DRIVE SPROCKETS (CONTINUED) for chains series 8SSG8815881M STANDARD SPROCKETS Polyamide, screws in S/S AISI 4, DIN 6885 key seat. Special shape of teeth compensates natural chain lengthening after prolonged use. Bore for axial locking only on request. 156 157 158 15 160 161 162 163 168 16 170 171 C H S 1 103, 61,,0,26 7,8 C H S DF SPLIT & STANDARD IDLER WHEELS for chains series 8SSG8815881M SPLIT IDLER WHEELS Polyamide, screws in S/S AISI 4. Special shape of teeth compensates natural chain lengthening after prolonged use. Excellent wear and chemical resistance. Reduced noise level and quiet operation. 3 41 42 43 44 45 46 11 13 1 117,0 61,,0,26 7,8 C H S DF Reinforced design. Completely closed structure, easier to clean and to disinfect. The design of the sprocket ensures smooth running and long service life STANDARD IDLER WHEELS DF Polyamide. Special shape of teeth compensates natural chain lengthening after prolonged use. 176 177 178 17 180 181 182 183 188 18 10 11 1 117,0 61,,0,26 7,8 7